search for: 0x6

...4096 x 4096 VGA-1 disconnected (normal left inverted right x axis y axis) LVDS-1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x1024 59.9*+ 1400x1050 60.0 + 60.0 1280x960 59.9 1152x864 60.0 1024x768 59.9 800x600 59.9 640x480 59.4 720x400 59.6 640x400 60.0 640x350 59.8 === SYS/SYSFS === $ cat /sys/bus/i2c/devices/1-0075/name ch7006 $ cat /sys/bus/i2c/devices/i2c-0/name nouveau-0000:01:00.0-0 $ cat /sys/bus/i2c/devices/i2c-1/name nouveau-0000:...

> On Tue, Apr 01, 2014 at 02:53:02PM -0400, Ilia Mirkin wrote: >I believe that ch7006 is the only external encoder that's supposed to >work, so you're in luck. It sounds like it passes the nv04_tv_identify >stage of nv04_tv_create -- perhaps it fails later? Although based on >the prints, it's even doing dpms stuff (but it hits _detect a second >time... odd). Try

Hi! I'm struggeling had to get a hfc pci card working in NT-Mode. I've installed a very basic test system with just one hfc pci card connected to an ISDN-phone over a modified NTBA as described on jollies homepage. I commpiled asterisk as descibed in kape's INSTALL file that comes with 'bri_stuff'. I have not modified the config fieles yet. After connecting to asterisk by

...gle -A PREROUTING -m tos --tos Minimize-Delay -j RETURN $IPTABLES -t mangle -A PREROUTING -m tos --tos Minimize-Cost -j MARK --set-mark 0x5 $IPTABLES -t mangle -A PREROUTING -m tos --tos Minimize-Cost -j RETURN $IPTABLES -t mangle -A PREROUTING -m tos --tos Maximize-Throughput -j MARK --set-mark 0x6 $IPTABLES -t mangle -A PREROUTING -m tos --tos Maximize-Throughput -j RETURN #Esto prioriza paquetes del puerto seteado $IPTABLES -t mangle -A PREROUTING -p tcp -m tcp --sport 80 -j MARK --set-mark 0x2 $IPTABLES -t mangle -A PREROUTING -p tcp -m tcp --sport 80 -j RETURN $IPTABLES -t mangle -A PR...

Hello list, I have these sorts of filters, putting traffic into the appropiate classid (1:15 is the default class): ${TC} filter add dev ${DEV_IFB} parent 1:0 prio 1 protocol ip u32 \ match ip protocol 0x6 0xff \ match ip sport 22 0xffff \ classid 1:11 # ssh ${TC} filter add dev ${DEV_IFB} parent 1:0 prio 1 protocol ip u32 \ match ip protocol 0x6 0xff \ match ip dport 22 0xffff \ classid 1:11 # ssh {and a few more 1:11 filters] ${TC} filter add dev ${DEV_IFB} parent 1:0 pri...

Any idea on what this error message means? Don't know what to do if second ROSE component is of type 0x6 I get that when I dial into my asterisk box. I'm using CVS HEAD of ZAPTEL, LIBPRI and ASTERISK, though I tried it with v1.0.7 of ASTERISK and I still get the same error. Thanks, Jess

...3 a[0x94] $r0 0x0 0x1 -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0xf wr 0x1) (st 0xf wr 0x0 rd 0x1 wt 0x3) (st 0xf wr 0x1 wt 0x2) ipa $r2 a[0x90] $r0 0x0 0x1 tex nodep $r1 $r2 0x0 0x1 t2d 0x8 ipa $r3 a[0x84] $r0 0x0 0x1 -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0xf wr 0x2) (st 0xf wr 0x1 wt 0x6) (st 0xf) ipa $r2 a[0x80] $r0 0x0 0x1 tex nodep $r0 $r2 0x0 0x0 t2d 0x8 depbar le 0x5 0x0 0x0 -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0x6 wt 0x3) (st 0x6) (st 0x1) fmul ftz $r3 $r0 $r1 mov $r2 $r3 0xf mov $r1 $r3 0xf -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0x6) (st 0xf) (st 0x0) mo...

...gle -A PREROUTING -m tos --tos Minimize-Delay -j RETURN $IPTABLES -t mangle -A PREROUTING -m tos --tos Minimize-Cost -j MARK --set-mark 0x5 $IPTABLES -t mangle -A PREROUTING -m tos --tos Minimize-Cost -j RETURN $IPTABLES -t mangle -A PREROUTING -m tos --tos Maximize-Throughput -j MARK --set-mark 0x6 $IPTABLES -t mangle -A PREROUTING -m tos --tos Maximize-Throughput -j RETURN #Esto prioriza paquetes del puerto seteado $IPTABLES -t mangle -A PREROUTING -p tcp -m tcp --sport 80 -j MARK --set-mark 0x2 $IPTABLES -t mangle -A PREROUTING -p tcp -m tcp --sport 80 -j RETURN $IPTABLES -t mangle -A PR...

...ol table info available. #3 0x00001652 in ?? () No symbol table info available. #4 0xb7ef1d41 in raise () from /lib/tls/libc.so.6 No symbol table info available. #5 0xb7ef3529 in abort () from /lib/tls/libc.so.6 No symbol table info available. #6 0x08098eba in i_internal_panic_handler ( fmt=0x6 <Address 0x6 out of bounds>, args=0x1652 <Address 0x1652 out of bounds>) at failures.c:374 No locals. #7 0x080992d4 in i_panic ( format=0x80a570c "file %s: line %d (%s): assertion failed: (%s)") at failures.c:173 No locals. #8 0x08081453 in mail_index_update_ext...

...sched (st 0xf wr 0x1) (st 0xf wr 0x0 rd 0x1 wt 0x3) (st 0xf wr 0x1 wt >> 0x2) >> ipa $r2 a[0x90] $r0 0x0 0x1 >> tex nodep $r1 $r2 0x0 0x1 t2d 0x8 >> ipa $r3 a[0x84] $r0 0x0 0x1 >> -sched (st 0x0) (st 0x0) (st 0x0) >> +sched (st 0xf wr 0x2) (st 0xf wr 0x1 wt 0x6) (st 0xf) >> ipa $r2 a[0x80] $r0 0x0 0x1 >> tex nodep $r0 $r2 0x0 0x0 t2d 0x8 >> > > Out of curiosity, what didn't you add a read-dep-bar on $r2:$r3 here? Missed it, thanks for pointing it out. > > > depbar le 0x5 0x0 0x0 >> -sched (st 0x0) (st 0x0...

...3 a[0x94] $r0 0x0 0x1 -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0xf wr 0x1) (st 0xf wr 0x0 rd 0x1 wt 0x3) (st 0xf wr 0x1 wt 0x2) ipa $r2 a[0x90] $r0 0x0 0x1 tex nodep $r1 $r2 0x0 0x1 t2d 0x8 ipa $r3 a[0x84] $r0 0x0 0x1 -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0xf wr 0x2) (st 0xf wr 0x1 wt 0x6) (st 0xf) ipa $r2 a[0x80] $r0 0x0 0x1 tex nodep $r0 $r2 0x0 0x0 t2d 0x8 depbar le 0x5 0x0 0x0 -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0x6 wt 0x3) (st 0x6) (st 0x1) fmul ftz $r3 $r0 $r1 mov $r2 $r3 0xf mov $r1 $r3 0xf -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0x6) (st 0xf) (st 0x0) mo...

...; [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.7-200.fc20.i686 root=UUID=6451f7ed-f2ff-4434-8aca-b130a49fb7d5 ro rd.md=0 rd.lvm=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=ter-128n resume=/dev/sda2 real_resume=/dev/sda2 console=tty1 video=LVDS-1:1024x768 at 60 video=VGA-1:800x600 at 60 video=TV-1:e video=TV:e gfxpayload=1024x768x16 selinux=0 nouveau.tv_disable=0 nouveau.tv_norm=NTSC-M nouveau.debug=1 ch7006.debug=2 ch7006.tv_norm=NTSC-M ch7006.scale=2 i2c-algo-bit.bit_test=1 rd.modules-load=i2c-dev rd.modules-load=i2c-i801 rd.modules-load=i2c-smbus nouveau.debug=debug drm...

Is it possible to negate the "match" to the ip? I want to match all traffic to dport 80 NOT going to dst 1.2.3.4: $TC filter add dev ${DEV_IFB} parent 1:0 prio 2 protocol ip u32 \ match ip protocol 0x6 0xff \ match ip dport 80 0xffff \ match ip dst 1.2.3.4/32 \ classid 1:14 I can''t find it in the docs. I tried "!" "\!" and "not" in several places, but always resulting in a "illegal match". R. -- ___________________________________________...

...0x0) (st 0x0) (st 0x0) > +sched (st 0xf wr 0x1) (st 0xf wr 0x0 rd 0x1 wt 0x3) (st 0xf wr 0x1 wt 0x2) > ipa $r2 a[0x90] $r0 0x0 0x1 > tex nodep $r1 $r2 0x0 0x1 t2d 0x8 > ipa $r3 a[0x84] $r0 0x0 0x1 > -sched (st 0x0) (st 0x0) (st 0x0) > +sched (st 0xf wr 0x2) (st 0xf wr 0x1 wt 0x6) (st 0xf) > ipa $r2 a[0x80] $r0 0x0 0x1 > tex nodep $r0 $r2 0x0 0x0 t2d 0x8 Out of curiosity, what didn't you add a read-dep-bar on $r2:$r3 here? > depbar le 0x5 0x0 0x0 > -sched (st 0x0) (st 0x0) (st 0x0) > +sched (st 0x6 wt 0x3) (st 0x6) (st 0x1) > fmul ftz $r3 $r0...

...sk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jeremy Gault Sent: Friday, October 14, 2005 10:23 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Don't know what to do if second ROSE componentis of type 0x6 FWIW, we are also seeing this message each time we receive a call. I also went the Google route and found only questions, not answers. We are running a PRI from US LEC (channels 1-10 are B-channels, with channel 24 being the D-channel, and we are only running voice on the PRI.) The PRI is c...

...(st 0xf wr >> 0x1 wt 0x2) >> ipa $r2 a[0x90] $r0 0x0 0x1 >> tex nodep $r1 $r2 0x0 0x1 t2d 0x8 >> ipa $r3 a[0x84] $r0 0x0 0x1 >> -sched (st 0x0) (st 0x0) (st 0x0) >> +sched (st 0xf wr 0x2) (st 0xf wr 0x1 wt 0x6) (st 0xf) >> ipa $r2 a[0x80] $r0 0x0 0x1 >> tex nodep $r0 $r2 0x0 0x0 t2d 0x8 >> >> >> Out of curiosity, what didn't you add a read-dep-bar on $r2:$r3 here? >> >> Missed it, thanks for pointing it out. >> > > You do...

...ound that Windows makes a call to a routine called RtlPrefetchMemoryNonTemporal, which looks like this: 8088e579 mov eax,dword ptr [nt!KePrefetchNTAGranularity 8088e57e 0f184100 prefetchnta [ecx] 8088e582 add ecx,eax 8088e584 sub edx,eax 8088e586 ja nt!RtlPrefetchMemoryNonTemporal+0x6 (8088e57e) 8088e588 ret Unfortunately it appears that the value at nt!KePrefetchNTAGranularity is 0, hence the infinite loop. Is there anything in Xen that could cause Windows to put a zero in there? The other (more likely?) alternative is that I''m doing something wrong in my driver that...

...ted by `imap'. Program terminated with signal 6, Aborted. (gdb) bt #1 0xbffff5c8 in ?? () #2 0x00000006 in ?? () #3 0x00000d14 in ?? () #4 0xb7ef1d41 in raise () from /lib/tls/libc.so.6 #5 0xb7ef3529 in abort () from /lib/tls/libc.so.6 #6 0x080985ba in i_internal_panic_handler ( fmt=0x6 <Address 0x6 out of bounds>, args=0xd14 <Address 0xd14 out of bounds>) at failures.c:374 #7 0x080989d4 in i_panic (format=0x80add1b "Trying to allocate %u bytes") at failures.c:173 #8 0x08097e37 in t_malloc_real (size=Variable "size" is not available. ) a...

...3 a[0x94] $r0 0x0 0x1 -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0xf wr 0x1) (st 0xf wr 0x0 rd 0x1 wt 0x3) (st 0xf wr 0x1 wt 0x2) ipa $r2 a[0x90] $r0 0x0 0x1 tex nodep $r1 $r2 0x0 0x1 t2d 0x8 ipa $r3 a[0x84] $r0 0x0 0x1 -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0xf wr 0x2) (st 0xf wr 0x1 wt 0x6) (st 0xf) ipa $r2 a[0x80] $r0 0x0 0x1 tex nodep $r0 $r2 0x0 0x0 t2d 0x8 depbar le 0x5 0x0 0x0 -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0x6 wt 0x3) (st 0x1) (st 0x1) fmul ftz $r3 $r0 $r1 mov $r2 $r3 0xf mov $r1 $r3 0xf -sched (st 0x0) (st 0x0) (st 0x0) +sched (st 0x1) (st 0xf) (st 0x0) mo...

...xf wr 0x0 rd 0x1 wt 0x3) (st 0xf wr > 0x1 wt 0x2) > ipa $r2 a[0x90] $r0 0x0 0x1 > tex nodep $r1 $r2 0x0 0x1 t2d 0x8 > ipa $r3 a[0x84] $r0 0x0 0x1 > -sched (st 0x0) (st 0x0) (st 0x0) > +sched (st 0xf wr 0x2) (st 0xf wr 0x1 wt 0x6) (st 0xf) > ipa $r2 a[0x80] $r0 0x0 0x1 > tex nodep $r0 $r2 0x0 0x0 t2d 0x8 > > > Out of curiosity, what didn't you add a read-dep-bar on $r2:$r3 here? > > Missed it, thanks for pointing it out. You don't have to. 'tex' reads two so...