search for: 025_nut

I have an FC5 system with a powerware 5110 usb ups. The system seems to find the UPS ------------------------------ [root@b1 src]# lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 0592:0002 Powerware Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 ------------------------------- [root@b1

Hi All I am connecting a ups via a usb to serial converter. Works fine, however when the converter is unplugged and plugged back in, udev creates another device e.g instead of ttyUSB0 it creates ttyUSB1. Here is the udev rule that I added to the top of the 025_nut-usbups.rules file in order to create a static symlink should udev decide to create the device as either ttyUSB0 or ttyUSB1. KERNEL=="ttyUSB?", MODE="664" GROUP="nut", SYMLINK+="upsserial2usb" The ups.conf file is set to use the newly created symlink /dev/...

...i, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb 4-1: new low speed USB device using address 8 Mar 12 14:52:03 serveur1 kernel: usbhid: probe of 4-1:1.0 failed with error -5 Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools: 0.28 USB communic...

...i, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb 4-1: new low speed USB device using address 8 Mar 12 14:52:03 serveur1 kernel: usbhid: probe of 4-1:1.0 failed with error -5 Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools: 0.28 USB communic...

I have changed over to CentOS5 on some of our computers. I had been using Mandriva 2006 and the nut software worked using: driver = newhidups port = auto Using the same version of nut with the same config files on CentOS5, I get the following error output from 'upsdrvctl': Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No

I have changed over to CentOS5 on some of our computers. I had been using Mandriva 2006 and the nut software worked using: driver = newhidups port = auto Using the same version of nut with the same config files on CentOS5, I get the following error output from 'upsdrvctl': Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No