search for: 0.143052

Thanks for reply. when i try richcomm_usb or blazer_usb or other usb i get the output of : sudo /lib/nut/usbhid-ups -a trust -DD this is the output: Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 Error: UPS [trust] is for driver richcomm_usb, but I'm usbhid-ups! i tried to set the ups.conf to: [trust] driver = usbhid-ups port = auto vendorid = 0925

I set the ups.conf to: driver = richcomm_usb port = auto now it is connected. There were the vendor variable and product id wrong. These are the variables i get in my OMV service output: device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto

Hallo all. I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed. i tried the blazer_usb <http://www.networkupstools.org/docs/man/blazer_usb.html> driver and others but i didn't succeed. My lsusb says Bus 002 Device 005: ID 0925:1234 Lakeview Research Bus 004 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 004 Device 004: ID 0424:2228 Standard

My UPS is connected to a Raspberry Pi by USB. After a few hours of working, the service fails. Looking at kernel messages I noticed that the device is repeatedly disconnecting and reconnecting. I have tried using a different USB port and using a brand new USB cable. I have not had success by changing config parameters like pollfreq/pollinterval/etc. What is causing the UPS to keep disconnecting?