L.P.H. van Belle
2021-Mar-24 08:15 UTC
[Samba] Samba Compiled From Source, Where Are The SystemD Unit Files?
Hai,
just saying, Profiling is enabled in my packages since 4.13.x ;-)
At least if you needed this option to be enabled, it is..
--with-profiling-data
And yes, im sadly to say, it was taking to much time to keep building
The raspbian packages, but if you add my sources, you can recompile
them pretty easy on raspbian. Pick the buster packages for that.
do keep in mind you need other packages to build first before you can build
samba.
I build in this order. that makes sure all build depends are there.
01-talloc
02-tevent
03-tdb
04-cmocka
05-ldb
06-nss-wrapper
07-resolv-wrapper
08-uid-wrapper
09-socket-wrapper
10-pam-wrapper
11-samba
echo "deb http://apt.van-belle.nl/debian/ buster-samba413 main contrib
non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list
echo "deb-src http://apt.van-belle.nl/debian/ buster-samba413 main contrib
non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list
# Optional, if there are newer packages that are in debian SID
echo "deb-src http://deb.debian.org/debian sid main contrib non-free"
| sudo tee -a /etc/apt/sources.list.d/van-belle.list
sudo apt-get -qq update
if [ ! -d 01-talloc ]
then
mkdir 01-talloc 02-tevent 03-tdb 04-cmocka 05-ldb \
06-nss-wrapper 07-resolv-wrapper 08-uid-wrapper 09-socket-wrapper \
10-pam-wrapper 11-samba
fi
cd 01-talloc/
apt-get source talloc
cd ..
cd 02-tevent/
apt-get source tevent
cd ..
cd 03-tdb/
apt-get source tdb
cd ..
cd 04-cmocka/
apt-get source cmocka
cd ..
cd 05-ldb/
apt-get source ldb
cd ..
cd 06-nss-wrapper/
apt-get source nss-wrapper
cd ..
cd 07-resolv-wrapper/
apt-get source resolv-wrapper
cd ..
cd 08-uid-wrapper/
apt-get source uid-wrapper
cd ..
cd 09-socket-wrapper/
apt-get source socket-wrapper
cd ..
cd 10-pam-wrapper/
apt-get source pam-wrapper
cd ..
cd 11-samba/
apt-get source samba
cd $(ls -ltr|grep "samba" |tail -n1 |awk '{ print $NF }')
grep ^VERSION lib/{talloc,tdb,tevent,ldb}/wscript
cat buildtools/wafsamba/samba_third_party.py |\
grep minversion | awk -F"(" '{ print $2 }'
And you see all needed minimal version you must build
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Dachshund
Digital
> via samba
> Verzonden: dinsdag 23 maart 2021 19:20
> Aan: samba at lists.samba.org
> Onderwerp: Re: [Samba] Samba Compiled From Source, Where Are The SystemD
> Unit Files?
>
> And take all the fun out of it... cough.? Per the site you listed, ARMHF
> is only up to 4.11.? But seems to reference 4.12 and 4.13 for ARM HF.
>
> "This server contains packages for Samba on Debian
> <http://www.debian.org/> Jessie (8) and Debian
<http://www.debian.org/>
> Stretch (9) amd64/i386 and Buster (10) amd64/i386 (samba 4.11 only,
> armhf) and Ubuntu <http://www.ubuntu.com/> Bionic Beaver (18.04)
> amd64/i386."
>
> "Raspbian Buster: (armhf/sources)
> Per 12-Nov 2019 in raspbian-buster-samba411 repo. armhf only, Only
> Security update untill 4.14. is release.
> Samba 4.11
> <https://wiki.samba.org/index.php/Release_Planning_for_Samba_4.11> is
> repo name : raspbian-buster-samba411, current package list : klik here
> <https://apt.van-belle.nl/current-packages-in-raspbian-buster-samba411-
> apt.txt>
> Security releases only
> Due to the time involved building Raspian packages, switch to Buster 412
> or 4.13 and its armhf packages, these work fine on Raspbian."
>
> But I still need profiling, so may end up compiling anyway.? :)
>
> -DD
>
> On 03/23/2021 10:44, Rowland penny via samba wrote:
> > On 23/03/2021 17:16, Dachshund Digital via samba wrote:
> >> Figured that might be the case, I copied the Debian 10 unit files
for
> >> smbd and nmbd, make the applicable changes, then discovered that
smbd
> >> is is failing after compile, make, make test, make install all
> >> successful (on Pi 4 native, not a cross compile).? So am a bit
> >> surprised.? Environment is Raspberry Pi OS 32bit for ARMv7 HF.? Is
> >> there any thing special that needs to be done for Pi devices when
> >> compiling from source?? Beyond the obvious required packages
before
> >> compile? Would have expected ./configure to throw a fit if there
was
> >> something special needed specific for Pi? Unfortunately, the
Debian
> >> 10 buster variant of Raspberry Pi OS only has a Samba 4.9 version
> >> level and even the yet to be released (as stable) Raspberry Pi OS
> >> based on Bullseye only has 4.12 included.? So I guess the package
> >> maintainers are a bit behind the curve given 4.14 is available as
> >> stable.? What started be down this path was the need for profiling
> >> support, which is not included by default in the Debian 10
packages.
> >
> >
> > Easiest way out of this, go here: https://apt.van-belle.nl/
> >
> > Stop compiling Samba yourself ????
> >
> > Rowland
> >
> >
> >
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
Dachshund Digital
2021-Mar-26 03:38 UTC
[Samba] Samba Compiled From Source, Where Are The SystemD Unit Files?
Louis, I will give it a shot.? But expect a lot of questions at first! :) I take it I can do all this on Raspberry Pi 4, with latest lite image as starting point, right? -DD On 03/24/2021 01:15, L.P.H. van Belle via samba wrote:> Hai, > > just saying, Profiling is enabled in my packages since 4.13.x ;-) > At least if you needed this option to be enabled, it is.. > --with-profiling-data > > And yes, im sadly to say, it was taking to much time to keep building > The raspbian packages, but if you add my sources, you can recompile > them pretty easy on raspbian. Pick the buster packages for that. > do keep in mind you need other packages to build first before you can build > samba. > > I build in this order. that makes sure all build depends are there. > > 01-talloc > 02-tevent > 03-tdb > 04-cmocka > 05-ldb > 06-nss-wrapper > 07-resolv-wrapper > 08-uid-wrapper > 09-socket-wrapper > 10-pam-wrapper > 11-samba > > echo "deb http://apt.van-belle.nl/debian/ buster-samba413 main contrib non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list > echo "deb-src http://apt.van-belle.nl/debian/ buster-samba413 main contrib non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list > > # Optional, if there are newer packages that are in debian SID > echo "deb-src http://deb.debian.org/debian sid main contrib non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list > > sudo apt-get -qq update > > if [ ! -d 01-talloc ] > then > mkdir 01-talloc 02-tevent 03-tdb 04-cmocka 05-ldb \ > 06-nss-wrapper 07-resolv-wrapper 08-uid-wrapper 09-socket-wrapper \ > 10-pam-wrapper 11-samba > fi > cd 01-talloc/ > apt-get source talloc > cd .. > cd 02-tevent/ > apt-get source tevent > cd .. > cd 03-tdb/ > apt-get source tdb > cd .. > cd 04-cmocka/ > apt-get source cmocka > cd .. > cd 05-ldb/ > apt-get source ldb > cd .. > cd 06-nss-wrapper/ > apt-get source nss-wrapper > cd .. > cd 07-resolv-wrapper/ > apt-get source resolv-wrapper > cd .. > cd 08-uid-wrapper/ > apt-get source uid-wrapper > cd .. > cd 09-socket-wrapper/ > apt-get source socket-wrapper > cd .. > cd 10-pam-wrapper/ > apt-get source pam-wrapper > cd .. > cd 11-samba/ > apt-get source samba > > cd $(ls -ltr|grep "samba" |tail -n1 |awk '{ print $NF }') > grep ^VERSION lib/{talloc,tdb,tevent,ldb}/wscript > cat buildtools/wafsamba/samba_third_party.py |\ > grep minversion | awk -F"(" '{ print $2 }' > > And you see all needed minimal version you must build > > > Greetz, > > Louis > > >> -----Oorspronkelijk bericht----- >> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Dachshund Digital >> via samba >> Verzonden: dinsdag 23 maart 2021 19:20 >> Aan: samba at lists.samba.org >> Onderwerp: Re: [Samba] Samba Compiled From Source, Where Are The SystemD >> Unit Files? >> >> And take all the fun out of it... cough.? Per the site you listed, ARMHF >> is only up to 4.11.? But seems to reference 4.12 and 4.13 for ARM HF. >> >> "This server contains packages for Samba on Debian >> <http://www.debian.org/> Jessie (8) and Debian <http://www.debian.org/> >> Stretch (9) amd64/i386 and Buster (10) amd64/i386 (samba 4.11 only, >> armhf) and Ubuntu <http://www.ubuntu.com/> Bionic Beaver (18.04) >> amd64/i386." >> >> "Raspbian Buster: (armhf/sources) >> Per 12-Nov 2019 in raspbian-buster-samba411 repo. armhf only, Only >> Security update untill 4.14. is release. >> Samba 4.11 >> <https://wiki.samba.org/index.php/Release_Planning_for_Samba_4.11> is >> repo name : raspbian-buster-samba411, current package list : klik here >> <https://apt.van-belle.nl/current-packages-in-raspbian-buster-samba411- >> apt.txt> >> Security releases only >> Due to the time involved building Raspian packages, switch to Buster 412 >> or 4.13 and its armhf packages, these work fine on Raspbian." >> >> But I still need profiling, so may end up compiling anyway.? :) >> >> -DD >> >> On 03/23/2021 10:44, Rowland penny via samba wrote: >>> On 23/03/2021 17:16, Dachshund Digital via samba wrote: >>>> Figured that might be the case, I copied the Debian 10 unit files for >>>> smbd and nmbd, make the applicable changes, then discovered that smbd >>>> is is failing after compile, make, make test, make install all >>>> successful (on Pi 4 native, not a cross compile).? So am a bit >>>> surprised.? Environment is Raspberry Pi OS 32bit for ARMv7 HF.? Is >>>> there any thing special that needs to be done for Pi devices when >>>> compiling from source?? Beyond the obvious required packages before >>>> compile? Would have expected ./configure to throw a fit if there was >>>> something special needed specific for Pi? Unfortunately, the Debian >>>> 10 buster variant of Raspberry Pi OS only has a Samba 4.9 version >>>> level and even the yet to be released (as stable) Raspberry Pi OS >>>> based on Bullseye only has 4.12 included.? So I guess the package >>>> maintainers are a bit behind the curve given 4.14 is available as >>>> stable.? What started be down this path was the need for profiling >>>> support, which is not included by default in the Debian 10 packages. >>> >>> Easiest way out of this, go here: https://apt.van-belle.nl/ >>> >>> Stop compiling Samba yourself ???? >>> >>> Rowland >>> >>> >>> >> -- >> To unsubscribe from this list go to the following URL and read the >> instructions: https://lists.samba.org/mailman/options/samba > >
Is this an issue per se, is it going to be fixed at some point? [??? 6.590110] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid ? /run/samba/smbd.pid; please update the unit file accordingly. [??? 6.662755] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid ? /run/samba/nmbd.pid; please update the unit file accordingly. This is something the package maintainer has to fix?? Since standard samba does have sample unit files, it should at least be fixed in those so the maintainer has a valid guide? This was found on debian 10 buster (ARMHF, not that the hardware platform matters for this issue). -DD On 03/25/2021 20:38, Dachshund Digital via samba wrote:> Louis, > > I will give it a shot.? But expect a lot of questions at first! :) > I take it I can do all this on Raspberry Pi 4, with latest lite image > as starting point, right? > > -DD > > On 03/24/2021 01:15, L.P.H. van Belle via samba wrote: >> Hai, >> >> just saying, Profiling is enabled in my packages since 4.13.x ;-) >> At least if you needed this option to be enabled, it is.. >> ??? --with-profiling-data >> >> And yes, im sadly to say, it was taking to much time to keep building >> The raspbian packages, but if you add my sources, you can recompile >> them pretty easy on raspbian. Pick the buster packages for that. >> do keep in mind you need other packages to build first before you can >> build >> samba. >> >> I build in this order. that makes sure all build depends are there. >> >> 01-talloc >> 02-tevent >> 03-tdb >> 04-cmocka >> 05-ldb >> 06-nss-wrapper >> 07-resolv-wrapper >> 08-uid-wrapper >> 09-socket-wrapper >> 10-pam-wrapper >> 11-samba >> >> echo "deb http://apt.van-belle.nl/debian/ buster-samba413 main >> contrib non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list >> echo "deb-src http://apt.van-belle.nl/debian/ buster-samba413 main >> contrib non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list >> >> # Optional, if there are newer packages that are in debian SID >> echo "deb-src http://deb.debian.org/debian sid main contrib non-free" >> | sudo tee -a /etc/apt/sources.list.d/van-belle.list >> >> sudo apt-get -qq update >> >> if [ ! -d 01-talloc ] >> then >> ???? mkdir 01-talloc 02-tevent 03-tdb 04-cmocka 05-ldb \ >> ???? 06-nss-wrapper 07-resolv-wrapper 08-uid-wrapper 09-socket-wrapper \ >> ???? 10-pam-wrapper 11-samba >> fi >> cd 01-talloc/ >> apt-get source talloc >> cd .. >> cd 02-tevent/ >> apt-get source tevent >> cd .. >> cd 03-tdb/ >> apt-get source tdb >> cd .. >> cd 04-cmocka/ >> apt-get source cmocka >> cd .. >> cd 05-ldb/ >> apt-get source ldb >> cd .. >> cd 06-nss-wrapper/ >> apt-get source nss-wrapper >> cd .. >> cd 07-resolv-wrapper/ >> apt-get source resolv-wrapper >> cd .. >> cd 08-uid-wrapper/ >> apt-get source uid-wrapper >> cd .. >> cd 09-socket-wrapper/ >> apt-get source socket-wrapper >> cd .. >> cd 10-pam-wrapper/ >> apt-get source pam-wrapper >> cd .. >> cd 11-samba/ >> apt-get source samba >> >> cd $(ls -ltr|grep "samba" |tail -n1 |awk '{ print $NF }') >> grep ^VERSION lib/{talloc,tdb,tevent,ldb}/wscript >> cat?? buildtools/wafsamba/samba_third_party.py |\ >> ? grep minversion | awk -F"(" '{ print $2 }' >> >> And you see all needed minimal version you must build >> >> >> Greetz, >> >> Louis >> >> >>> -----Oorspronkelijk bericht----- >>> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Dachshund >>> Digital >>> via samba >>> Verzonden: dinsdag 23 maart 2021 19:20 >>> Aan: samba at lists.samba.org >>> Onderwerp: Re: [Samba] Samba Compiled From Source, Where Are The >>> SystemD >>> Unit Files? >>> >>> And take all the fun out of it... cough.? Per the site you listed, >>> ARMHF >>> is only up to 4.11.? But seems to reference 4.12 and 4.13 for ARM HF. >>> >>> "This server contains packages for Samba on Debian >>> <http://www.debian.org/> Jessie (8) and Debian <http://www.debian.org/> >>> Stretch (9) amd64/i386 and Buster (10) amd64/i386 (samba 4.11 only, >>> armhf) and Ubuntu <http://www.ubuntu.com/> Bionic Beaver (18.04) >>> amd64/i386." >>> >>> "Raspbian Buster: (armhf/sources) >>> Per 12-Nov 2019 in raspbian-buster-samba411 repo. armhf only, Only >>> Security update untill 4.14. is release. >>> Samba 4.11 >>> <https://wiki.samba.org/index.php/Release_Planning_for_Samba_4.11> is >>> repo name : raspbian-buster-samba411, current package list : klik here >>> <https://apt.van-belle.nl/current-packages-in-raspbian-buster-samba411- >>> apt.txt> >>> Security releases only >>> Due to the time involved building Raspian packages, switch to Buster >>> 412 >>> or 4.13 and its armhf packages, these work fine on Raspbian." >>> >>> But I still need profiling, so may end up compiling anyway. :) >>> >>> -DD >>> >>> On 03/23/2021 10:44, Rowland penny via samba wrote: >>>> On 23/03/2021 17:16, Dachshund Digital via samba wrote: >>>>> Figured that might be the case, I copied the Debian 10 unit files for >>>>> smbd and nmbd, make the applicable changes, then discovered that smbd >>>>> is is failing after compile, make, make test, make install all >>>>> successful (on Pi 4 native, not a cross compile).? So am a bit >>>>> surprised.? Environment is Raspberry Pi OS 32bit for ARMv7 HF.? Is >>>>> there any thing special that needs to be done for Pi devices when >>>>> compiling from source?? Beyond the obvious required packages before >>>>> compile? Would have expected ./configure to throw a fit if there was >>>>> something special needed specific for Pi? Unfortunately, the Debian >>>>> 10 buster variant of Raspberry Pi OS only has a Samba 4.9 version >>>>> level and even the yet to be released (as stable) Raspberry Pi OS >>>>> based on Bullseye only has 4.12 included.? So I guess the package >>>>> maintainers are a bit behind the curve given 4.14 is available as >>>>> stable.? What started be down this path was the need for profiling >>>>> support, which is not included by default in the Debian 10 packages. >>>> >>>> Easiest way out of this, go here: https://apt.van-belle.nl/ >>>> >>>> Stop compiling Samba yourself ???? >>>> >>>> Rowland >>>> >>>> >>>> >>> -- >>> To unsubscribe from this list go to the following URL and read the >>> instructions:? https://lists.samba.org/mailman/options/samba >> >> >
Hai, yes, the package maintainer has fixed it in newer packages. But which samba version is this ? armhf, you told, but is it the 4.9.x debian official or one of mine? I think its the official one. ;-) I can make a small patch and go for a merge in official Debian. Just as far i know, current packages have : --with-piddir=/run/samba \ in the build config. just do a manual update for these and they are gone. Fix is simple : sed -i 's/\/var\/run\/samba/\/run\/samba/g' /var/lib/samba/*.service systemctl daemon-reload systemctl restart smbd winbind (samba-ad-dc nmbd) Greetz, Louis> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens Dachshund Digital > via samba > Verzonden: zondag 4 april 2021 19:16 > Aan: samba at lists.samba.org > Onderwerp: [Samba] Warning about unit files? > > Is this an issue per se, is it going to be fixed at some point? > > [??? 6.590110] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile> references path below legacy directory /var/run/, updating > /var/run/samba/smbd.pid ??? /run/samba/smbd.pid; please update the unit > file accordingly. > [??? 6.662755] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile> references path below legacy directory /var/run/, updating > /var/run/samba/nmbd.pid ??? /run/samba/nmbd.pid; please update the unit > file accordingly. > > This is something the package maintainer has to fix?? Since standard > samba does have sample unit files, it should at least be fixed in those > so the maintainer has a valid guide? > > This was found on debian 10 buster (ARMHF, not that the hardware > platform matters for this issue). > > -DD > > On 03/25/2021 20:38, Dachshund Digital via samba wrote: > > Louis, > > > > I will give it a shot.? But expect a lot of questions at first! :) > > I take it I can do all this on Raspberry Pi 4, with latest lite image > > as starting point, right? > > > > -DD > > > > On 03/24/2021 01:15, L.P.H. van Belle via samba wrote: > >> Hai, > >> > >> just saying, Profiling is enabled in my packages since 4.13.x ;-) > >> At least if you needed this option to be enabled, it is.. > >> ??? --with-profiling-data > >> > >> And yes, im sadly to say, it was taking to much time to keep building > >> The raspbian packages, but if you add my sources, you can recompile > >> them pretty easy on raspbian. Pick the buster packages for that. > >> do keep in mind you need other packages to build first before you can > >> build > >> samba. > >> > >> I build in this order. that makes sure all build depends are there. > >> > >> 01-talloc > >> 02-tevent > >> 03-tdb > >> 04-cmocka > >> 05-ldb > >> 06-nss-wrapper > >> 07-resolv-wrapper > >> 08-uid-wrapper > >> 09-socket-wrapper > >> 10-pam-wrapper > >> 11-samba > >> > >> echo "deb http://apt.van-belle.nl/debian/ buster-samba413 main > >> contrib non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list > >> echo "deb-src http://apt.van-belle.nl/debian/ buster-samba413 main > >> contrib non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list > >> > >> # Optional, if there are newer packages that are in debian SID > >> echo "deb-src http://deb.debian.org/debian sid main contrib non-free" > >> | sudo tee -a /etc/apt/sources.list.d/van-belle.list > >> > >> sudo apt-get -qq update > >> > >> if [ ! -d 01-talloc ] > >> then > >> ???? mkdir 01-talloc 02-tevent 03-tdb 04-cmocka 05-ldb \ > >> ???? 06-nss-wrapper 07-resolv-wrapper 08-uid-wrapper 09-socket-wrapper > \ > >> ???? 10-pam-wrapper 11-samba > >> fi > >> cd 01-talloc/ > >> apt-get source talloc > >> cd .. > >> cd 02-tevent/ > >> apt-get source tevent > >> cd .. > >> cd 03-tdb/ > >> apt-get source tdb > >> cd .. > >> cd 04-cmocka/ > >> apt-get source cmocka > >> cd .. > >> cd 05-ldb/ > >> apt-get source ldb > >> cd .. > >> cd 06-nss-wrapper/ > >> apt-get source nss-wrapper > >> cd .. > >> cd 07-resolv-wrapper/ > >> apt-get source resolv-wrapper > >> cd .. > >> cd 08-uid-wrapper/ > >> apt-get source uid-wrapper > >> cd .. > >> cd 09-socket-wrapper/ > >> apt-get source socket-wrapper > >> cd .. > >> cd 10-pam-wrapper/ > >> apt-get source pam-wrapper > >> cd .. > >> cd 11-samba/ > >> apt-get source samba > >> > >> cd $(ls -ltr|grep "samba" |tail -n1 |awk '{ print $NF }') > >> grep ^VERSION lib/{talloc,tdb,tevent,ldb}/wscript > >> cat?? buildtools/wafsamba/samba_third_party.py |\ > >> ? grep minversion | awk -F"(" '{ print $2 }' > >> > >> And you see all needed minimal version you must build > >> > >> > >> Greetz, > >> > >> Louis > >> > >> > >>> -----Oorspronkelijk bericht----- > >>> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Dachshund > >>> Digital > >>> via samba > >>> Verzonden: dinsdag 23 maart 2021 19:20 > >>> Aan: samba at lists.samba.org > >>> Onderwerp: Re: [Samba] Samba Compiled From Source, Where Are The > >>> SystemD > >>> Unit Files? > >>> > >>> And take all the fun out of it... cough.? Per the site you listed, > >>> ARMHF > >>> is only up to 4.11.? But seems to reference 4.12 and 4.13 for ARM HF. > >>> > >>> "This server contains packages for Samba on Debian > >>> <http://www.debian.org/> Jessie (8) and Debian > <http://www.debian.org/> > >>> Stretch (9) amd64/i386 and Buster (10) amd64/i386 (samba 4.11 only, > >>> armhf) and Ubuntu <http://www.ubuntu.com/> Bionic Beaver (18.04) > >>> amd64/i386." > >>> > >>> "Raspbian Buster: (armhf/sources) > >>> Per 12-Nov 2019 in raspbian-buster-samba411 repo. armhf only, Only > >>> Security update untill 4.14. is release. > >>> Samba 4.11 > >>> <https://wiki.samba.org/index.php/Release_Planning_for_Samba_4.11> is > >>> repo name : raspbian-buster-samba411, current package list : klik here > >>> <https://apt.van-belle.nl/current-packages-in-raspbian-buster- > samba411- > >>> apt.txt> > >>> Security releases only > >>> Due to the time involved building Raspian packages, switch to Buster > >>> 412 > >>> or 4.13 and its armhf packages, these work fine on Raspbian." > >>> > >>> But I still need profiling, so may end up compiling anyway. :) > >>> > >>> -DD > >>> > >>> On 03/23/2021 10:44, Rowland penny via samba wrote: > >>>> On 23/03/2021 17:16, Dachshund Digital via samba wrote: > >>>>> Figured that might be the case, I copied the Debian 10 unit files > for > >>>>> smbd and nmbd, make the applicable changes, then discovered that > smbd > >>>>> is is failing after compile, make, make test, make install all > >>>>> successful (on Pi 4 native, not a cross compile).? So am a bit > >>>>> surprised.? Environment is Raspberry Pi OS 32bit for ARMv7 HF.? Is > >>>>> there any thing special that needs to be done for Pi devices when > >>>>> compiling from source?? Beyond the obvious required packages before > >>>>> compile? Would have expected ./configure to throw a fit if there was > >>>>> something special needed specific for Pi? Unfortunately, the Debian > >>>>> 10 buster variant of Raspberry Pi OS only has a Samba 4.9 version > >>>>> level and even the yet to be released (as stable) Raspberry Pi OS > >>>>> based on Bullseye only has 4.12 included.? So I guess the package > >>>>> maintainers are a bit behind the curve given 4.14 is available as > >>>>> stable.? What started be down this path was the need for profiling > >>>>> support, which is not included by default in the Debian 10 packages. > >>>> > >>>> Easiest way out of this, go here: https://apt.van-belle.nl/ > >>>> > >>>> Stop compiling Samba yourself ???? > >>>> > >>>> Rowland > >>>> > >>>> > >>>> > >>> -- > >>> To unsubscribe from this list go to the following URL and read the > >>> instructions:? https://lists.samba.org/mailman/options/samba > >> > >> > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba