L.P.H. van Belle
2021-Jan-25 09:31 UTC
[Samba] Is it possible to 'getfacl' on a mounted samba share ?
Hai Nico, what does this give you as result on that Nas. tune2fs -l /dev/XXX1 | grep "Default mount options:" (change XXX to disk offcourse). Do you get this back? Default mount options: user_xattr acl if not, try tune2fs -o acl /dev/XXX1 Greetz, Louis> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens Nicola Mingotti > via samba > Verzonden: maandag 25 januari 2021 10:01 > Aan: Rowland penny; sambalist > Onderwerp: Re: [Samba] Is it possible to 'getfacl' on a mounted samba > share ? > > > Hi Rowland, > > Still it is not working but I can give you some extra info. > > . Installed packages > p at linte> dpkg -l | grep 'acl\|attr' | awk '{print $1,$2," ",$3}' > ii acl????? 2.2.53-4 > ii attr????? 1:2.4.48-4 > ii fonts-quicksand????? 0.2016-2 > ii libacl1:amd64????? 2.2.53-4 > ii libattr1:amd64????? 1:2.4.48-4 > ii python3-xattr????? 0.9.6-1 > ii spice-client-glib-usb-acl-helper????? 0.35-2 > ii xattr????? 0.9.6-1 > => This is a superset of what i see in machine 'nas' so i guess it > should be fine. > > . Do I see the '+' in 'ls' ? No > p at linte> ls -l /mnt/discoR/Borghi/ | head -n 3 > total 1024 > drwxr-xr-x 2 root root????? 0 Oct? 5 14:49 Applicativi > drwxr-xr-x 2 root root????? 0 Dec? 7 16:05 Archivio > > . The same applies if I do it through a domain user: > WINDOM\nicola at linte> ls -l /mnt/discoR/Borghi/ | head -n 3 > total 1024 > drwxr-xr-x 2 root root????? 0 Oct? 5 14:49 Applicativi > drwxr-xr-x 2 root root????? 0 Dec? 7 16:05 Archivio > > . But I see the '+' from the machine 'nas' > p at nas> ls -l /mnt/sambaShared/sambaDisk/DiscoS/Borghi/ | head -n 3 > total 252 > drwxrwx---+? 7 root adm??? 4096 Oct? 5 14:49 Applicativi > drwxrwx---+ 10 root adm??? 4096 Dec? 7 16:05 Archivio > > . I can see the '+' in 'linte' if i define my self a permission there > ? also, in that case 'getfacl' works as expected. > p at linte> cd . > p at linte> touch test.txt > p at linte> sudo groupadd testgroup > p at linte> setfacl -m g:testgroup:000 test.txt > p at linte> ls -l | grep test.txt > -rw-r--r--+ 1 p p??? 0 Jan 25 09:44 test.txt > p at linte> getfacl test.txt > # file: test.txt > # owner: p > # group: p > user::rw- > group::r-- > group:testgroup:--- > mask::r-- > other::r-- > > . I tried to toggle several parameters in /etc/fstab without success: > ------- /etc/fstab -------------- > # / was on /dev/vda1 during installation > UUID=5b450ed1-2951-4a2c-b444-22dc1509a275 / ext4 > user_xattr,acl,errors=remount-ro 0?????? 1 > ... > # mount disco R > //nas.borghi.lan/sambaDisk/DiscoS/??? /mnt/discoR?? cifs > cifsacl,credentials=/usr/local/etc/discoR.credentials??? 0??? 0 > --------------------------------- > > . For completeness i add the Samba configuration of 'linte' which > ? is there just to let 'linte' join the Windows domain at the moment. > ---------------- /etc/samba/smb.conf ----------------------------------- > [global] > ?? workgroup = WINDOM > ?? security = ADS > ?? realm = WINDOM.BORGHI.LAN > > ?? winbind refresh tickets = Yes > ?? vfs objects = acl_xattr > ?? map acl inherit = Yes > ?? store dos attributes = Yes > > ?? dedicated keytab file = /etc/krb5.keytab > ?? kerberos method = secrets and keytab > > ?? # ho un solo dominio, quindi mi conviene non dover digitare sempre > ?? # user invece di "WINDOM\user" > ?? # winbind use default domain = yes > > ?? # rimuovere dopo il testing > ?? winbind enum users = yes > ?? winbind enum groups = yes > > ?? # disable printing > ?? load printers = no > ?? printing = bsd > ?? printcap name = /dev/null > ?? disable spoolss = yes > > ?? # logs > ?? log file = /var/log/samba/%m.log > ?? log level = 1 > > ?? # ---- ID mapping backend rid ------- > ?? # Default ID mapping configuration for local BUILTIN accounts > ?? # and groups on a domain member. The default (*) domain: > ?? # - must not overlap with any domain ID mapping configuration! > ?? # - must use a read-write-enabled back end, such as tdb. > ?? idmap config * : backend = tdb > ?? idmap config * : range = 3000-7999 > ?? # - You must set a DOMAIN backend configuration > ?? # idmap config for the SAMDOM domain > ?? idmap config SAMDOM : backend = rid > ?? idmap config SAMDOM : range = 10000-999999 > > ?? # Template settings for login shell and home directory > ?? template shell = /bin/bash > ?? template homedir = /home/WINDOM-%U > > ?? # mappare "Administrator" a "root" > ?? username map = /usr/local/samba/etc/user.map > > # directory che funge da disco in condivisione > # ok- this is working ! > # [sambaDisk] > #?????? path = /home/WINDOM-nicola/testSamba > #?????? read only = no > #?????? vfs objects = shadow_copy2 > #?????? shadow:snapdir = /home/WINDOM-nicola/snapshots > #?????? shadow:basedir = /home/WINDOM-nicola/testSamba > #?????? shadow:sort = desc > > > # [sambaDisk] > #?????? path = /home/WINDOM-nicola/testSamba > #?????? read only = no > #?????? vfs objects = shadow_copy2 > #?????? shadow:mountpoint = /home/WINDOM-nicola/testSamba > #?????? # richiesto relative se si usa 'snapdirseverywhere' > #?????? shadow:snapdir = snapshots > #?????? # shadow:snapdir = /home/WINDOM-nicola/testSamba/snapshots > #?????? # shadow:basedir = toSnap > #?????? shadow:sort = desc > #?????? # shadow:localtime = yes > #?????? # shadow:format = '%Y.%m.%d-%H.%M.%S' > #?????? shadow:snapdirseverywhere = yes > > ------------------------------------------------------------------------ > > > Do you have any other ideas ? > > Thank you for your help in any case ! > > bye > Nicola > > > > > On 1/24/21 7:47 PM, Rowland penny via samba wrote: > > On 24/01/2021 18:26, Nicola Mingotti wrote: > >> > >> Thank you for your feedback Rowland. > >> > >> I tried as you suggest, both parameters are now in? [global] and I > >> removed them from [sambaDisk]. > >> Rebooted all machines a few times but unfortunately still it does not > >> want to work. > > > > > > If you run: > > > > ls -lad /mnt/sambaShared/sambaDisk/DiscoS/Borghi > > > > and: > > > > ls -lad /mnt/discoR/Borghi > > > > Do you get a '+' sign after the Unix permissions ? > > > > e.g. ls -lad /srv/www/htdocs/testshare > > > > drwxrwx---+ 2 root domain users 4096 Oct 28? 2019 > > /srv/www/htdocs/testshare > > > > ?I am assuming 'Borghi' is a directory. > > > > Are both the acl and attr packages installed ? > > > > Rowland > > > > > > > > > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba
Nicola Mingotti
2021-Jan-25 09:49 UTC
[Samba] Is it possible to 'getfacl' on a mounted samba share ?
Hi Luois, Going toward the path you suggest I get: p at linte> mount | grep ' / ' /dev/vda1 on / type ext4 (rw,relatime,errors=remount-ro) p at linte> sudo tune2fs -l /dev/vda1? | grep -i defa Default mount options:??? user_xattr acl Default directory hash:?? half_md4 But, then I checked another thing: p at linte> uname -a Linux linte 4.19.0-13-amd64 #1 SMP Debian 4.19.160-2 (2020-11-28) x86_64 GNU/Linux p at nas> uname -a Linux nas 4.19.0-12-amd64 #1 SMP Debian 4.19.152-1 (2020-10-18) x86_64 GNU/Linux => Given that both systems are Debian stable, it might be that kernel 4.19.0-13 has something broken regarding CIFS. I am going to try to change the kernel version and see what happens. bye Nicola On 1/25/21 10:31 AM, L.P.H. van Belle via samba wrote:> Hai Nico, > > what does this give you as result on that Nas. > tune2fs -l /dev/XXX1 | grep "Default mount options:" > (change XXX to disk offcourse). > > Do you get this back? > Default mount options: user_xattr acl > > if not, try tune2fs -o acl /dev/XXX1 > > > Greetz, > > Louis > > >> -----Oorspronkelijk bericht----- >> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Nicola Mingotti >> via samba >> Verzonden: maandag 25 januari 2021 10:01 >> Aan: Rowland penny; sambalist >> Onderwerp: Re: [Samba] Is it possible to 'getfacl' on a mounted samba >> share ? >> >> >> Hi Rowland, >> >> Still it is not working but I can give you some extra info. >> >> . Installed packages >> p at linte> dpkg -l | grep 'acl\|attr' | awk '{print $1,$2," ",$3}' >> ii acl????? 2.2.53-4 >> ii attr????? 1:2.4.48-4 >> ii fonts-quicksand????? 0.2016-2 >> ii libacl1:amd64????? 2.2.53-4 >> ii libattr1:amd64????? 1:2.4.48-4 >> ii python3-xattr????? 0.9.6-1 >> ii spice-client-glib-usb-acl-helper????? 0.35-2 >> ii xattr????? 0.9.6-1 >> => This is a superset of what i see in machine 'nas' so i guess it >> should be fine. >> >> . Do I see the '+' in 'ls' ? No >> p at linte> ls -l /mnt/discoR/Borghi/ | head -n 3 >> total 1024 >> drwxr-xr-x 2 root root????? 0 Oct? 5 14:49 Applicativi >> drwxr-xr-x 2 root root????? 0 Dec? 7 16:05 Archivio >> >> . The same applies if I do it through a domain user: >> WINDOM\nicola at linte> ls -l /mnt/discoR/Borghi/ | head -n 3 >> total 1024 >> drwxr-xr-x 2 root root????? 0 Oct? 5 14:49 Applicativi >> drwxr-xr-x 2 root root????? 0 Dec? 7 16:05 Archivio >> >> . But I see the '+' from the machine 'nas' >> p at nas> ls -l /mnt/sambaShared/sambaDisk/DiscoS/Borghi/ | head -n 3 >> total 252 >> drwxrwx---+? 7 root adm??? 4096 Oct? 5 14:49 Applicativi >> drwxrwx---+ 10 root adm??? 4096 Dec? 7 16:05 Archivio >> >> . I can see the '+' in 'linte' if i define my self a permission there >> ? also, in that case 'getfacl' works as expected. >> p at linte> cd . >> p at linte> touch test.txt >> p at linte> sudo groupadd testgroup >> p at linte> setfacl -m g:testgroup:000 test.txt >> p at linte> ls -l | grep test.txt >> -rw-r--r--+ 1 p p??? 0 Jan 25 09:44 test.txt >> p at linte> getfacl test.txt >> # file: test.txt >> # owner: p >> # group: p >> user::rw- >> group::r-- >> group:testgroup:--- >> mask::r-- >> other::r-- >> >> . I tried to toggle several parameters in /etc/fstab without success: >> ------- /etc/fstab -------------- >> # / was on /dev/vda1 during installation >> UUID=5b450ed1-2951-4a2c-b444-22dc1509a275 / ext4 >> user_xattr,acl,errors=remount-ro 0?????? 1 >> ... >> # mount disco R >> //nas.borghi.lan/sambaDisk/DiscoS/??? /mnt/discoR?? cifs >> cifsacl,credentials=/usr/local/etc/discoR.credentials??? 0??? 0 >> --------------------------------- >> >> . For completeness i add the Samba configuration of 'linte' which >> ? is there just to let 'linte' join the Windows domain at the moment. >> ---------------- /etc/samba/smb.conf ----------------------------------- >> [global] >> ?? workgroup = WINDOM >> ?? security = ADS >> ?? realm = WINDOM.BORGHI.LAN >> >> ?? winbind refresh tickets = Yes >> ?? vfs objects = acl_xattr >> ?? map acl inherit = Yes >> ?? store dos attributes = Yes >> >> ?? dedicated keytab file = /etc/krb5.keytab >> ?? kerberos method = secrets and keytab >> >> ?? # ho un solo dominio, quindi mi conviene non dover digitare sempre >> ?? # user invece di "WINDOM\user" >> ?? # winbind use default domain = yes >> >> ?? # rimuovere dopo il testing >> ?? winbind enum users = yes >> ?? winbind enum groups = yes >> >> ?? # disable printing >> ?? load printers = no >> ?? printing = bsd >> ?? printcap name = /dev/null >> ?? disable spoolss = yes >> >> ?? # logs >> ?? log file = /var/log/samba/%m.log >> ?? log level = 1 >> >> ?? # ---- ID mapping backend rid ------- >> ?? # Default ID mapping configuration for local BUILTIN accounts >> ?? # and groups on a domain member. The default (*) domain: >> ?? # - must not overlap with any domain ID mapping configuration! >> ?? # - must use a read-write-enabled back end, such as tdb. >> ?? idmap config * : backend = tdb >> ?? idmap config * : range = 3000-7999 >> ?? # - You must set a DOMAIN backend configuration >> ?? # idmap config for the SAMDOM domain >> ?? idmap config SAMDOM : backend = rid >> ?? idmap config SAMDOM : range = 10000-999999 >> >> ?? # Template settings for login shell and home directory >> ?? template shell = /bin/bash >> ?? template homedir = /home/WINDOM-%U >> >> ?? # mappare "Administrator" a "root" >> ?? username map = /usr/local/samba/etc/user.map >> >> # directory che funge da disco in condivisione >> # ok- this is working ! >> # [sambaDisk] >> #?????? path = /home/WINDOM-nicola/testSamba >> #?????? read only = no >> #?????? vfs objects = shadow_copy2 >> #?????? shadow:snapdir = /home/WINDOM-nicola/snapshots >> #?????? shadow:basedir = /home/WINDOM-nicola/testSamba >> #?????? shadow:sort = desc >> >> >> # [sambaDisk] >> #?????? path = /home/WINDOM-nicola/testSamba >> #?????? read only = no >> #?????? vfs objects = shadow_copy2 >> #?????? shadow:mountpoint = /home/WINDOM-nicola/testSamba >> #?????? # richiesto relative se si usa 'snapdirseverywhere' >> #?????? shadow:snapdir = snapshots >> #?????? # shadow:snapdir = /home/WINDOM-nicola/testSamba/snapshots >> #?????? # shadow:basedir = toSnap >> #?????? shadow:sort = desc >> #?????? # shadow:localtime = yes >> #?????? # shadow:format = '%Y.%m.%d-%H.%M.%S' >> #?????? shadow:snapdirseverywhere = yes >> >> ------------------------------------------------------------------------ >> >> >> Do you have any other ideas ? >> >> Thank you for your help in any case ! >> >> bye >> Nicola >> >> >> >> >> On 1/24/21 7:47 PM, Rowland penny via samba wrote: >>> On 24/01/2021 18:26, Nicola Mingotti wrote: >>>> Thank you for your feedback Rowland. >>>> >>>> I tried as you suggest, both parameters are now in? [global] and I >>>> removed them from [sambaDisk]. >>>> Rebooted all machines a few times but unfortunately still it does not >>>> want to work. >>> >>> If you run: >>> >>> ls -lad /mnt/sambaShared/sambaDisk/DiscoS/Borghi >>> >>> and: >>> >>> ls -lad /mnt/discoR/Borghi >>> >>> Do you get a '+' sign after the Unix permissions ? >>> >>> e.g. ls -lad /srv/www/htdocs/testshare >>> >>> drwxrwx---+ 2 root domain users 4096 Oct 28? 2019 >>> /srv/www/htdocs/testshare >>> >>> ?I am assuming 'Borghi' is a directory. >>> >>> Are both the acl and attr packages installed ? >>> >>> Rowland >>> >>> >>> >>> >>> >> -- >> To unsubscribe from this list go to the following URL and read the >> instructions: https://lists.samba.org/mailman/options/samba > >
L.P.H. van Belle
2021-Jan-25 09:54 UTC
[Samba] Is it possible to 'getfacl' on a mounted samba share ?
Thats a good catch. It might that cifs is more outdated on buster. A reference here on the changes in kernel https://wiki.samba.org/index.php/LinuxCIFSKernel Greetz, Louis> -----Oorspronkelijk bericht----- > Van: Nicola Mingotti [mailto:nmingotti at gmail.com] > Verzonden: maandag 25 januari 2021 10:49 > Aan: L.P.H. van Belle; samba at lists.samba.org > Onderwerp: Re: [Samba] Is it possible to 'getfacl' on a mounted samba > share ? > > > Hi Luois, > > Going toward the path you suggest I get: > > p at linte> mount | grep ' / ' > /dev/vda1 on / type ext4 (rw,relatime,errors=remount-ro) > > p at linte> sudo tune2fs -l /dev/vda1? | grep -i defa > Default mount options:??? user_xattr acl > Default directory hash:?? half_md4 > > But, then I checked another thing: > > p at linte> uname -a > Linux linte 4.19.0-13-amd64 #1 SMP Debian 4.19.160-2 (2020-11-28) x86_64 > GNU/Linux > > p at nas> uname -a > Linux nas 4.19.0-12-amd64 #1 SMP Debian 4.19.152-1 (2020-10-18) x86_64 > GNU/Linux > > => Given that both systems are Debian stable, it might be that kernel > 4.19.0-13 > has something broken regarding CIFS. > > I am going to try to change the kernel version and see what happens. > > > bye > Nicola > > > On 1/25/21 10:31 AM, L.P.H. van Belle via samba wrote: > > Hai Nico, > > > > what does this give you as result on that Nas. > > tune2fs -l /dev/XXX1 | grep "Default mount options:" > > (change XXX to disk offcourse). > > > > Do you get this back? > > Default mount options: user_xattr acl > > > > if not, try tune2fs -o acl /dev/XXX1 > > > > > > Greetz, > > > > Louis > > > > > >> -----Oorspronkelijk bericht----- > >> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Nicola > Mingotti > >> via samba > >> Verzonden: maandag 25 januari 2021 10:01 > >> Aan: Rowland penny; sambalist > >> Onderwerp: Re: [Samba] Is it possible to 'getfacl' on a mounted samba > >> share ? > >> > >> > >> Hi Rowland, > >> > >> Still it is not working but I can give you some extra info. > >> > >> . Installed packages > >> p at linte> dpkg -l | grep 'acl\|attr' | awk '{print $1,$2," ",$3}' > >> ii acl????? 2.2.53-4 > >> ii attr????? 1:2.4.48-4 > >> ii fonts-quicksand????? 0.2016-2 > >> ii libacl1:amd64????? 2.2.53-4 > >> ii libattr1:amd64????? 1:2.4.48-4 > >> ii python3-xattr????? 0.9.6-1 > >> ii spice-client-glib-usb-acl-helper????? 0.35-2 > >> ii xattr????? 0.9.6-1 > >> => This is a superset of what i see in machine 'nas' so i guess it > >> should be fine. > >> > >> . Do I see the '+' in 'ls' ? No > >> p at linte> ls -l /mnt/discoR/Borghi/ | head -n 3 > >> total 1024 > >> drwxr-xr-x 2 root root????? 0 Oct? 5 14:49 Applicativi > >> drwxr-xr-x 2 root root????? 0 Dec? 7 16:05 Archivio > >> > >> . The same applies if I do it through a domain user: > >> WINDOM\nicola at linte> ls -l /mnt/discoR/Borghi/ | head -n 3 > >> total 1024 > >> drwxr-xr-x 2 root root????? 0 Oct? 5 14:49 Applicativi > >> drwxr-xr-x 2 root root????? 0 Dec? 7 16:05 Archivio > >> > >> . But I see the '+' from the machine 'nas' > >> p at nas> ls -l /mnt/sambaShared/sambaDisk/DiscoS/Borghi/ | head -n 3 > >> total 252 > >> drwxrwx---+? 7 root adm??? 4096 Oct? 5 14:49 Applicativi > >> drwxrwx---+ 10 root adm??? 4096 Dec? 7 16:05 Archivio > >> > >> . I can see the '+' in 'linte' if i define my self a permission there > >> ? also, in that case 'getfacl' works as expected. > >> p at linte> cd . > >> p at linte> touch test.txt > >> p at linte> sudo groupadd testgroup > >> p at linte> setfacl -m g:testgroup:000 test.txt > >> p at linte> ls -l | grep test.txt > >> -rw-r--r--+ 1 p p??? 0 Jan 25 09:44 test.txt > >> p at linte> getfacl test.txt > >> # file: test.txt > >> # owner: p > >> # group: p > >> user::rw- > >> group::r-- > >> group:testgroup:--- > >> mask::r-- > >> other::r-- > >> > >> . I tried to toggle several parameters in /etc/fstab without success: > >> ------- /etc/fstab -------------- > >> # / was on /dev/vda1 during installation > >> UUID=5b450ed1-2951-4a2c-b444-22dc1509a275 / ext4 > >> user_xattr,acl,errors=remount-ro 0?????? 1 > >> ... > >> # mount disco R > >> //nas.borghi.lan/sambaDisk/DiscoS/??? /mnt/discoR?? cifs > >> cifsacl,credentials=/usr/local/etc/discoR.credentials??? 0??? 0 > >> --------------------------------- > >> > >> . For completeness i add the Samba configuration of 'linte' which > >> ? is there just to let 'linte' join the Windows domain at the moment. > >> ---------------- /etc/samba/smb.conf ---------------------------------- > - > >> [global] > >> ?? workgroup = WINDOM > >> ?? security = ADS > >> ?? realm = WINDOM.BORGHI.LAN > >> > >> ?? winbind refresh tickets = Yes > >> ?? vfs objects = acl_xattr > >> ?? map acl inherit = Yes > >> ?? store dos attributes = Yes > >> > >> ?? dedicated keytab file = /etc/krb5.keytab > >> ?? kerberos method = secrets and keytab > >> > >> ?? # ho un solo dominio, quindi mi conviene non dover digitare sempre > >> ?? # user invece di "WINDOM\user" > >> ?? # winbind use default domain = yes > >> > >> ?? # rimuovere dopo il testing > >> ?? winbind enum users = yes > >> ?? winbind enum groups = yes > >> > >> ?? # disable printing > >> ?? load printers = no > >> ?? printing = bsd > >> ?? printcap name = /dev/null > >> ?? disable spoolss = yes > >> > >> ?? # logs > >> ?? log file = /var/log/samba/%m.log > >> ?? log level = 1 > >> > >> ?? # ---- ID mapping backend rid ------- > >> ?? # Default ID mapping configuration for local BUILTIN accounts > >> ?? # and groups on a domain member. The default (*) domain: > >> ?? # - must not overlap with any domain ID mapping configuration! > >> ?? # - must use a read-write-enabled back end, such as tdb. > >> ?? idmap config * : backend = tdb > >> ?? idmap config * : range = 3000-7999 > >> ?? # - You must set a DOMAIN backend configuration > >> ?? # idmap config for the SAMDOM domain > >> ?? idmap config SAMDOM : backend = rid > >> ?? idmap config SAMDOM : range = 10000-999999 > >> > >> ?? # Template settings for login shell and home directory > >> ?? template shell = /bin/bash > >> ?? template homedir = /home/WINDOM-%U > >> > >> ?? # mappare "Administrator" a "root" > >> ?? username map = /usr/local/samba/etc/user.map > >> > >> # directory che funge da disco in condivisione > >> # ok- this is working ! > >> # [sambaDisk] > >> #?????? path = /home/WINDOM-nicola/testSamba > >> #?????? read only = no > >> #?????? vfs objects = shadow_copy2 > >> #?????? shadow:snapdir = /home/WINDOM-nicola/snapshots > >> #?????? shadow:basedir = /home/WINDOM-nicola/testSamba > >> #?????? shadow:sort = desc > >> > >> > >> # [sambaDisk] > >> #?????? path = /home/WINDOM-nicola/testSamba > >> #?????? read only = no > >> #?????? vfs objects = shadow_copy2 > >> #?????? shadow:mountpoint = /home/WINDOM-nicola/testSamba > >> #?????? # richiesto relative se si usa 'snapdirseverywhere' > >> #?????? shadow:snapdir = snapshots > >> #?????? # shadow:snapdir = /home/WINDOM-nicola/testSamba/snapshots > >> #?????? # shadow:basedir = toSnap > >> #?????? shadow:sort = desc > >> #?????? # shadow:localtime = yes > >> #?????? # shadow:format = '%Y.%m.%d-%H.%M.%S' > >> #?????? shadow:snapdirseverywhere = yes > >> > >> ----------------------------------------------------------------------- > - > >> > >> > >> Do you have any other ideas ? > >> > >> Thank you for your help in any case ! > >> > >> bye > >> Nicola > >> > >> > >> > >> > >> On 1/24/21 7:47 PM, Rowland penny via samba wrote: > >>> On 24/01/2021 18:26, Nicola Mingotti wrote: > >>>> Thank you for your feedback Rowland. > >>>> > >>>> I tried as you suggest, both parameters are now in? [global] and I > >>>> removed them from [sambaDisk]. > >>>> Rebooted all machines a few times but unfortunately still it does not > >>>> want to work. > >>> > >>> If you run: > >>> > >>> ls -lad /mnt/sambaShared/sambaDisk/DiscoS/Borghi > >>> > >>> and: > >>> > >>> ls -lad /mnt/discoR/Borghi > >>> > >>> Do you get a '+' sign after the Unix permissions ? > >>> > >>> e.g. ls -lad /srv/www/htdocs/testshare > >>> > >>> drwxrwx---+ 2 root domain users 4096 Oct 28? 2019 > >>> /srv/www/htdocs/testshare > >>> > >>> ?I am assuming 'Borghi' is a directory. > >>> > >>> Are both the acl and attr packages installed ? > >>> > >>> Rowland > >>> > >>> > >>> > >>> > >>> > >> -- > >> To unsubscribe from this list go to the following URL and read the > >> instructions: https://lists.samba.org/mailman/options/samba > > > >