thr3ads.net - samba - [Samba] Using Samba AD/DC as an Active Directory OAuth provider for OpenShift [Aug 2020]

If this information is useful, please help other people find it:
Share via:

Rowland penny

2020-Aug-21 21:08 UTC

[Samba] Using Samba AD/DC as an Active Directory OAuth provider for OpenShift

On 21/08/2020 21:40, vincent at cojot.name wrote:> On Fri, 21 Aug 2020, Rowland penny via samba wrote:
>
>> This works for me:
>>
>> rowland at devstation:~$ sudo ldapsearch -H 
>> ldaps://dc01.samdom.example.com -D 'SAMDOM\Administrator' -w 
>> 'xxxxxxxxxx' -b 'dc=samdom,dc=example,dc=com' 
>> 'memberof:1.2.840.113556.1.4.1941:=cn=Domain 
>> Admins,CN=Users,dc=samdom,dc=example,dc=com' | grep 'dn:'
>> [sudo] password for rowland:
>> dn: CN=Unix Admins,CN=Users,DC=samdom,DC=example,DC=com
>> dn: CN=swanadmin,CN=Users,DC=samdom,DC=example,DC=com
>> dn: CN=Rowland Penny,CN=Users,DC=samdom,DC=example,DC=com
>> dn: CN=dhcpduser,CN=Users,DC=samdom,DC=example,DC=com
>> dn: CN=Administrator,CN=Users,DC=samdom,DC=example,DC=com
>>
>> Rowland
>
> You're right, this works here too:
> ldapsearch -H ldaps://dc00.ad.lasthome.solace.krynn:636 -x -W -D
> "raistlin at ad.lasthome.solace.krynn" -b 
> "dc=ad,dc=lasthome,dc=solace,dc=krynn" 
> 'memberof:1.2.840.113556.1.4.1941:=cn=Domain 
> Admins,CN=Users,dc=ad,dc=lasthome,dc=solace,dc=krynn'|grep
'dn:'
> Enter LDAP Password:
> dn: CN=raistlin,CN=Users,DC=ad,DC=lasthome,DC=solace,DC=krynn
> dn: CN=Administrator,CN=Users,DC=ad,DC=lasthome,DC=solace,DC=krynn
>
> So that must not be the problem, then.. Do you see anything else that 
> stands out in the lines below?
>
> augmentedActiveDirectory:
> ??? groupsQuery:
> ??????? baseDN: "DC=ad,DC=lasthome,DC=solace,DC=krynn"
> ??????? scope: sub
> ??????? derefAliases: never
> ??????? pageSize: 0
> ??????? filter: (objectclass=group)
> ??? groupUIDAttribute: primaryGroupID
> ??? groupNameAttributes: [ cn ]
> ??? groupMembershipAttributes: [
"memberof:1.2.840.113556.1.4.1941:" ]
> ??? usersQuery:
> ??????? baseDN: "DC=ad,DC=lasthome,DC=solace,DC=krynn"
> ??????? scope: sub
> ??????? derefAliases: never
> ??????? filter: (objectclass=person)
> ??????? pageSize: 0
> ??? userNameAttributes: [ "sAMAccountName" ]
As far as I can see (and I could be missing something obvious), whilst 
it defines the search base, etc, it doesn't define what DN to search 
for. Should [ "memberof:1.2.840.113556.1.4.1941:" ]? be something
like:

[ "memberof:1.2.840.113556.1.4.1941:=cn=Domain 
Users,CN=Users,dc=samdom,dc=example,dc=com" ]

Rowland

Rowland penny

2020-Aug-21 21:29 UTC

head link

[Samba] Using Samba AD/DC as an Active Directory OAuth provider for OpenShift

On 21/08/2020 22:08, Rowland penny via samba wrote:> On 21/08/2020 21:40, vincent at cojot.name wrote:
>> On Fri, 21 Aug 2020, Rowland penny via samba wrote:
>>
>>> This works for me:
>>>
>>> rowland at devstation:~$ sudo ldapsearch -H 
>>> ldaps://dc01.samdom.example.com -D 'SAMDOM\Administrator'
-w
>>> 'xxxxxxxxxx' -b 'dc=samdom,dc=example,dc=com' 
>>> 'memberof:1.2.840.113556.1.4.1941:=cn=Domain 
>>> Admins,CN=Users,dc=samdom,dc=example,dc=com' | grep
'dn:'
>>> [sudo] password for rowland:
>>> dn: CN=Unix Admins,CN=Users,DC=samdom,DC=example,DC=com
>>> dn: CN=swanadmin,CN=Users,DC=samdom,DC=example,DC=com
>>> dn: CN=Rowland Penny,CN=Users,DC=samdom,DC=example,DC=com
>>> dn: CN=dhcpduser,CN=Users,DC=samdom,DC=example,DC=com
>>> dn: CN=Administrator,CN=Users,DC=samdom,DC=example,DC=com
>>>
>>> Rowland
>>
>> You're right, this works here too:
>> ldapsearch -H ldaps://dc00.ad.lasthome.solace.krynn:636 -x -W -D
>> "raistlin at ad.lasthome.solace.krynn" -b 
>> "dc=ad,dc=lasthome,dc=solace,dc=krynn" 
>> 'memberof:1.2.840.113556.1.4.1941:=cn=Domain 
>> Admins,CN=Users,dc=ad,dc=lasthome,dc=solace,dc=krynn'|grep
'dn:'
>> Enter LDAP Password:
>> dn: CN=raistlin,CN=Users,DC=ad,DC=lasthome,DC=solace,DC=krynn
>> dn: CN=Administrator,CN=Users,DC=ad,DC=lasthome,DC=solace,DC=krynn
>>
>> So that must not be the problem, then.. Do you see anything else that 
>> stands out in the lines below?
>>
>> augmentedActiveDirectory:
>> ??? groupsQuery:
>> ??????? baseDN: "DC=ad,DC=lasthome,DC=solace,DC=krynn"
>> ??????? scope: sub
>> ??????? derefAliases: never
>> ??????? pageSize: 0
>> ??????? filter: (objectclass=group)
>> ??? groupUIDAttribute: primaryGroupID
>> ??? groupNameAttributes: [ cn ]
>> ??? groupMembershipAttributes: [
"memberof:1.2.840.113556.1.4.1941:" ]
>> ??? usersQuery:
>> ??????? baseDN: "DC=ad,DC=lasthome,DC=solace,DC=krynn"
>> ??????? scope: sub
>> ??????? derefAliases: never
>> ??????? filter: (objectclass=person)
>> ??????? pageSize: 0
>> ??? userNameAttributes: [ "sAMAccountName" ]
>
> As far as I can see (and I could be missing something obvious), whilst 
> it defines the search base, etc, it doesn't define what DN to search 
> for. Should [ "memberof:1.2.840.113556.1.4.1941:" ]? be something
like:
>
> [ "memberof:1.2.840.113556.1.4.1941:=cn=Domain 
> Users,CN=Users,dc=samdom,dc=example,dc=com" ]
>
> Rowland 
looking at 'krynn-ad-sync-config.yaml' , you have
'groupUIDAttribute'
set to 'primaryGroupID' and that is set to '513' for every AD
user
(unless you have changed it), so could the UID actually refer to 
something that identifies the group ? 'dn' for instance ?

Rowland

vincent at cojot.name

2020-Aug-21 21:51 UTC

head link

[Samba] Using Samba AD/DC as an Active Directory OAuth provider for OpenShift

Hi Rowland,

First of all, thank you for taking the time to help me.
I tried your suggestion and all results came up empty.

Then I did a few lapdsearch(es) and found this:

1) This query returns two users:
ldapsearch -H ldaps://dc00.ad.lasthome.solace.krynn:636 -x -W -D 
"raistlin at ad.lasthome.solace.krynn" -b 
"dc=ad,dc=lasthome,dc=solace,dc=krynn" 
'memberOf:1.2.840.113556.1.4.1941:=cn=Domain 
Admins,CN=Users,dc=ad,dc=lasthome,dc=solace,dc=krynn'

2) This query returns no users ("Domain Users" instead of "Domain
Admins"):
ldapsearch -H ldaps://dc00.ad.lasthome.solace.krynn:636 -x -W -D 
"raistlin at ad.lasthome.solace.krynn" -b 
"dc=ad,dc=lasthome,dc=solace,dc=krynn" 
'memberOf:1.2.840.113556.1.4.1941:=cn=Domain 
Users,CN=Users,dc=ad,dc=lasthome,dc=solace,dc=krynn'

-but- the list of users is correctly reported if I run this on a DC:
root at dc01 ~]# samba-tool group listmembers 'Domain Users'
[....]
raistlin
[...]
krbtgt
dns-dc00
dns-dc01

Am I doing something wrong?

Regards,

Vincent

vincent at cojot.name

2020-Aug-21 22:07 UTC

head link

[Samba] Using Samba AD/DC as an Active Directory OAuth provider for OpenShift

Hi Rowland,

Here's an updated config of the yaml file. With that config (it is only 
using 'memberOf', I only get a few groups and not all of them):

$ oc adm groups sync --sync-config=krynn-ad-sync-config.yaml --confirm
group/Administrators
group/Denied RODC Password Replication Group
group/Domain Admins
group/Enterprise Admins
group/Group Policy Creator Owners
group/Guests
group/Schema Admins
$

I have about 27 groups (all default groups) on this setup. The missing 
groups appear to be 'nested groups', which OCP doesn't handle and
this is
why I started experimenting with memberOf:1.2.840.113556.1.4.1941 (it was 
described in the documentation as a way to un-flatten nested groups for 
AD).

Vincent

>>> ??????? pageSize: 0
>>> ??? userNameAttributes: [ "sAMAccountName" ]
>> 
>> As far as I can see (and I could be missing something obvious), whilst
it
>> defines the search base, etc, it doesn't define what DN to search
for.
>> Should [ "memberof:1.2.840.113556.1.4.1941:" ]? be something
like:
>> 
>> [ "memberof:1.2.840.113556.1.4.1941:=cn=Domain 
>> Users,CN=Users,dc=samdom,dc=example,dc=com" ]
>> 
>> Rowland 
>
> looking at 'krynn-ad-sync-config.yaml' , you have
'groupUIDAttribute' set to
> 'primaryGroupID' and that is set to '513' for every AD user
(unless you have
> changed it), so could the UID actually refer to something that identifies
the
> group ? 'dn' for instance ?
>
> Rowland
>
>
>
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>-------------- next part --------------
# oc adm groups sync  --sync-config=krynn-ad-sync-config.yaml --confirm
--whitelist=krynn_group_list.txt
kind: LDAPSyncConfig
apiVersion: v1
url: ldap://dc00.ad.lasthome.solace.krynn:389
insecure: false
ca: "KrynnAD.pem"
bindDN: "CN=openshift,CN=Users,DC=ad,DC=lasthome,DC=solace,DC=krynn"
bindPassword: "OBFUSCATED"
augmentedActiveDirectory:
    groupsQuery:
        baseDN: "DC=ad,DC=lasthome,DC=solace,DC=krynn"
        scope: sub
        derefAliases: never
        pageSize: 0
    groupUIDAttribute: dn
    groupNameAttributes: [ cn ]
    groupMembershipAttributes: [ "memberOf" ]
    #groupMembershipAttributes: [
"memberOf:1.2.840.113556.1.4.1941:=cn=Domain
Users,CN=Users,DC=ad,DC=lasthome,DC=solace,DC=krynn" ]
    usersQuery:
        baseDN: "DC=ad,DC=lasthome,DC=solace,DC=krynn"
        scope: sub
        derefAliases: always
        filter: (objectclass=person)
        pageSize: 0
    userNameAttributes: [ "sAMAccountName" ]

Andrew Bartlett

2020-Aug-21 22:59 UTC

head link

[Samba] Using Samba AD/DC as an Active Directory OAuth provider for OpenShift

On Fri, 2020-08-21 at 17:51 -0400, Vincent S. Cojot via samba
wrote:> Hi Rowland,
> 
> First of all, thank you for taking the time to help me.
> I tried your suggestion and all results came up empty.
> 
> Then I did a few lapdsearch(es) and found this:
> 
> 1) This query returns two users:
> ldapsearch -H ldaps://dc00.ad.lasthome.solace.krynn:636 -x -W -D 
> "raistlin at ad.lasthome.solace.krynn" -b 
> "dc=ad,dc=lasthome,dc=solace,dc=krynn" 
> 'memberOf:1.2.840.113556.1.4.1941:=cn=Domain 
> Admins,CN=Users,dc=ad,dc=lasthome,dc=solace,dc=krynn'
> 
> 2) This query returns no users ("Domain Users" instead of
"Domain
> Admins"):
> ldapsearch -H ldaps://dc00.ad.lasthome.solace.krynn:636 -x -W -D 
> "raistlin at ad.lasthome.solace.krynn" -b 
> "dc=ad,dc=lasthome,dc=solace,dc=krynn" 
> 'memberOf:1.2.840.113556.1.4.1941:=cn=Domain 
> Users,CN=Users,dc=ad,dc=lasthome,dc=solace,dc=krynn'
> 
> -but- the list of users is correctly reported if I run this on a DC:
> root at dc01 ~]# samba-tool group listmembers 'Domain Users'
> [....]
> raistlin
> [...]
> krbtgt
> dns-dc00
> dns-dc01
> 
> Am I doing something wrong?
The system that you ary trying to use for OpenShift does not know about
primary group memberships, as these are not recorded as DN links.

Inside that samba-tool group listmembers command we work around that by
using this filter:
            search_filter = ("(|(primaryGroupID=%s)(memberOf=%s))" %
                             (rid, group_sid_dn))

You may need to contribute logic upstream to OpenShift to learn about
how groups work in AD, or (if secure) forgo primary group memberships.

Andrew Bartlett

-- 
Andrew Bartlett                       http://samba.org/~abartlet/
Authentication Developer, Samba Team  http://samba.org
Samba Developer, Catalyst IT          http://catalyst.net.nz/services/samba

Reasonably Related Threads

Search for more seemingly similar threads

samba - Aug 2020 - Using Samba AD/DC as an Active Directory OAuth provider for OpenShift

[Samba] Using Samba AD/DC as an Active Directory OAuth provider for OpenShift

[Samba] Using Samba AD/DC as an Active Directory OAuth provider for OpenShift

[Samba] Using Samba AD/DC as an Active Directory OAuth provider for OpenShift

[Samba] Using Samba AD/DC as an Active Directory OAuth provider for OpenShift

[Samba] Using Samba AD/DC as an Active Directory OAuth provider for OpenShift

Reasonably Related Threads