Ok, new test.
Besides that i dont like the python errors shown, this still looks good.
So i dont know.. See below, i can not make it error.
for x in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ; do samba-tool dns add
dc1.internal.dom.tld $x.249.10.in-addr.arpa 158 PTR host-test.extrazone.dom.tld
; done
Record added successfully
Record added successfully
Record added successfully
Record added successfully
Record added successfully
ERROR: Zone does not exist; record coud not be added.
ERROR: Zone does not exist; record could not be added.
ERROR: Zone does not exist; record could not be added.
ERROR: Zone does not exist; record could not be added.
ERROR: Zone does not exist; record could not be added.
ERROR: Zone does not exist; record could not be added.
ERROR: Zone does not exist; record could not be added.
ERROR: Zone does not exist; record could not be added.
ERROR: Zone does not exist; record could not be added.
ERROR: Zone does not exist; record could not be added.
ERROR: Zone does not exist; record could not be added.
for x in 0 1 2 3 4 5 6 7 ; do samba-tool dns add dc1.internal.dom.tld
$x.249.10.in-addr.arpa 158 PTR host-test.extrazone.dom.tld ; done
ERROR(runtime): uncaught exception - (9711,
'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
File "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", line
186, in _run
return self.run(*args, **kwargs)
File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 945,
in run
raise e
File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 941,
in run
0, server, zone, name, add_rec_buf, None)
ERROR(runtime): uncaught exception - (9711,
'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
File "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", line
186, in _run
return self.run(*args, **kwargs)
File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 945,
in run
raise e
File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 941,
in run
0, server, zone, name, add_rec_buf, None)
ERROR(runtime): uncaught exception - (9711,
'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
File "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", line
186, in _run
return self.run(*args, **kwargs)
File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 945,
in run
raise e
File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 941,
in run
0, server, zone, name, add_rec_buf, None)
ERROR(runtime): uncaught exception - (9711,
'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
File "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", line
186, in _run
return self.run(*args, **kwargs)
File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 945,
in run
raise e
File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 941,
in run
0, server, zone, name, add_rec_buf, None)
ERROR(runtime): uncaught exception - (9711,
'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
File "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", line
186, in _run
return self.run(*args, **kwargs)
File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 945,
in run
raise e
File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 941,
in run
0, server, zone, name, add_rec_buf, None)
ERROR: Zone does not exist; record could not be added.
ERROR: Zone does not exist; record could not be added.
ERROR: Zone does not exist; record could not be added.
for x in 0 1 2 3 4 5 6 7 ; do nslookup 10.249.$x.158 ; done
158.0.249.10.in-addr.arpa name = host-test.extrazone.dom.tld.
158.1.249.10.in-addr.arpa name = host-test.extrazone.dom.tld.
158.2.249.10.in-addr.arpa name = host-test.extrazone.dom.tld.
158.3.249.10.in-addr.arpa name = host-test.extrazone.dom.tld.
158.4.249.10.in-addr.arpa name = host-test.extrazone.dom.tld.
** server can't find 158.5.249.10.in-addr.arpa: NXDOMAIN
** server can't find 158.6.249.10.in-addr.arpa: NXDOMAIN
** server can't find 158.7.249.10.in-addr.arpa: NXDOMAIN
Other range since you mentioned, this was in 192.168.x zones.
So here you go.
for x in 0 1 2 3 4 5 6 ; do samba-tool dns zonecreate dc1.internal.dom.tld
$x.168.192.in-addr.arpa ; done
Zone 0.168.192.in-addr.arpa created successfully
Zone 1.168.192.in-addr.arpa created successfully
Zone 2.168.192.in-addr.arpa created successfully
Zone 3.168.192.in-addr.arpa created successfully
Zone 4.168.192.in-addr.arpa created successfully
Zone 5.168.192.in-addr.arpa created successfully
Zone 6.168.192.in-addr.arpa created successfully
for x in 0 1 2 3 4 5 6 ; do samba-tool dns add dc1.internal.dom.tld
$x.168.192.in-addr.arpa 1 PTR host-test.extrazone.dom.tld ; done
Record added successfully
Record added successfully
Record added successfully
Record added successfully
Record added successfully
Record added successfully
Record added successfully
for x in 0 1 2 3 4 5 6 ; do nslookup 192.168.$x.1 ; done
1.0.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
1.1.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
1.2.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
1.3.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
1.4.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
1.5.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
1.6.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
Did you run my debugscript already, can you post it
https://github.com/thctlo/samba4/raw/master/samba-collect-debug-info.sh
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
> Christian Naumer via samba
> Verzonden: donderdag 27 februari 2020 9:24
> Aan: samba at lists.samba.org
> Onderwerp: Re: [Samba] New PTR records not visible
>
> Hi,
> have you tried adding an entry to another host on 157? For me it only
> produces the error with 0.168.192.in-addr.arpa and
> 2.168.192.in-addr.arpa. Not with 1 or 3.
>
> Regards
>
> Christian
>
>
> Am 27.02.20 um 08:42 schrieb L.P.H. van Belle via samba:
> > Hai,
> >
> > Today i thought lets re-test this again.
> > So this was done yesterday,
> >
> > samba-tool dns add dc1.internal.dom.tld
> 2.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld
> > samba-tool dns add dc1.internal.dom.tld
> 0.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld
> > samba-tool dns add dc1.internal.dom.tld
> 1.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld
> >
> > I did keep the entries in the dns yesterday.
> >
> > Today :
> >
> > samba-tool dns add dc1.internal.dom.tld
> 2.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld
> > Password for [Administrator at REALM]:
> > ERROR(runtime): uncaught exception - (9711,
> 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
> > File
> "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py",
> line 186, in _run
> > return self.run(*args, **kwargs)
> > File
> "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 945,
in run
> > raise e
> > File
> "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 941,
in run
> > 0, server, zone, name, add_rec_buf, None)
> > # adding an extra on in "3"
> > samba-tool dns add dc1.internal.dom.tld
> 3.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld
> > Password for [Administrator at REALM]:
> > Record added successfully
> >
> > And i check all the reverse zones there dns records.
> > All checked out ok.
> >
> > Sorry i can not make if fail here.
> >
> >
> > Greetz,
> >
> > Louis
> >
> >
> >> -----Oorspronkelijk bericht-----
> >> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
> >> Christian Naumer via samba
> >> Verzonden: woensdag 26 februari 2020 15:54
> >> Aan: samba at lists.samba.org
> >> Onderwerp: Re: [Samba] New PTR records not visible
> >>
> >> Am 26.02.20 um 15:40 schrieb L.P.H. van Belle via samba:
> >>> So strange..
> >>>
> >>> I copied your commando's only change the arpa and
> >> servername / domainnames
> >>> All worked.
> >>
> >> Have you checked that you have this situation?
> >>
> >> If this entry "192.168.2.157" exists and if you try to
add
> >> "192.168.0.157" another entry to point to
"192.168.2.157" is added.
> >>
> >>
> >>>
> >>> So far nobody told how there ad-dc and DNS is setup..
> >>> Which i why i added :
> >>>>> Debian 10, my own packages.
> >>>>> Samba 4.11.6 + BIND9_DLZ is used .
> >>>
> >>> Now are you using samba DNS or BIND_DLZ dns ?
> >>
> >> I am using BIND_DLZ. On Centos 7 with the Sernet Packages.
> >>
> >> Regards
> >>
> >> Christian
> >>
> >> --
> >> Dr. Christian Naumer
> >> Unit Head Bioprocess Development
> >> B.R.A.I.N Aktiengesellschaft
> >> Darmstaedter Str. 34-36, D-64673 Zwingenberg
> >> e-mail cn at brain-biotech.com, homepage www.brain-biotech.com
> >> fon +49-6251-9331-30 / fax +49-6251-9331-11
> >>
> >> Sitz der Gesellschaft: Zwingenberg/Bergstrasse
> >> Registergericht AG Darmstadt, HRB 24758
> >> Vorstand: Adriaan Moelker (Vorstandsvorsitzender),
> >> Manfred Bender, Ludger Roedder
> >> Aufsichtsratsvorsitzender: Dr. Georg Kellinghusen
> >>
> >> --
> >> To unsubscribe from this list go to the following URL and read the
> >> instructions: https://lists.samba.org/mailman/options/samba
> >>
> >>
> >
> >
>
> --
> Dr. Christian Naumer
> Unit Head Bioprocess Development
> B.R.A.I.N Aktiengesellschaft
> Darmstaedter Str. 34-36, D-64673 Zwingenberg
> e-mail cn at brain-biotech.com, homepage www.brain-biotech.com
> fon +49-6251-9331-30 / fax +49-6251-9331-11
>
> Sitz der Gesellschaft: Zwingenberg/Bergstrasse
> Registergericht AG Darmstadt, HRB 24758
> Vorstand: Adriaan Moelker (Vorstandsvorsitzender),
> Manfred Bender, Ludger Roedder
> Aufsichtsratsvorsitzender: Dr. Georg Kellinghusen
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
>
>
Hello Lois,
thanks for looking into this. Have you looked at what the original
poster shared in the bug report?
https://bugzilla.samba.org/show_bug.cgi?id=14268
I don't have a big problem with this, just trying to help. Maybe the
original poster can say more with regards of the problem he has with this.
here are more of my details.
Regards
#####samba-debug-info.txt##############
Collected config --- 2020-02-27-10:17 -----------
Hostname: dc1
DNS Domain: ad.domain.de
FQDN: DC1.ad.domain.de
ipaddress: 192.168.0.90
-----------
Kerberos SRV _kerberos._tcp.ad.domain.de record verified ok, sample output:
Server: 192.168.0.90
Address: 192.168.0.90#53
_kerberos._tcp.ad.domain.de service = 0 100 88 dc1.ad.domain.de.
_kerberos._tcp.ad.domain.de service = 0 100 88 dc3.ad.domain.de.
_kerberos._tcp.ad.domain.de service = 0 100 88 dc2.ad.domain.de.
_kerberos._tcp.ad.domain.de service = 0 100 88 dc4.ad.domain.de.
Samba is running as an AD DC
-----------
Checking file: /etc/os-release
NAME="CentOS Linux"
VERSION="7 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="7"
PRETTY_NAME="CentOS Linux 7 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:7"
HOME_URL="https://www.centos.org/"
BUG_REPORT_URL="https://bugs.centos.org/"
CENTOS_MANTISBT_PROJECT="CentOS-7"
CENTOS_MANTISBT_PROJECT_VERSION="7"
REDHAT_SUPPORT_PRODUCT="centos"
REDHAT_SUPPORT_PRODUCT_VERSION="7"
-----------
This computer is running an unknown distribution x86_64
-----------
running command : ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
group default qlen 1000
link/ether 6e:48:a7:59:a3:e4 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.90/21 brd 192.168.7.255 scope global eth0
inet6 fe80::6c48:a7ff:fe59:a3e4/64 scope link
-----------
Checking file: /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4
localhost4.localdomain4
::1 localhost localhost.localdomain localhost6
localhost6.localdomain6
192.168.0.90 DC1.ad.domain.de DC1
192.168.0.91 DC2.ad.domain.de DC2
192.168.0.106 DC4.ad.domain.de DC4
192.168.0.190 DC3.ad.domain.de DC3
-----------
Checking file: /etc/resolv.conf
# Generated by NetworkManager
search ad.domain.de domain.de domain.com domain.de. domain.com. domain.de
nameserver 192.168.0.90
nameserver 192.168.0.91
nameserver 192.168.0.106
-----------
Checking file: /etc/krb5.conf
[logging]
default = FILE:/var/log/krb5libs.log
kdc = FILE:/var/log/krb5kdc.log
admin_server = FILE:/var/log/kadmind.log
[libdefaults]
default_realm = ad.domain.DE
dns_lookup_realm = true
dns_lookup_kdc = true
ticket_lifetime = 24h
renew_lifetime = 7d
forwardable = true
-----------
Checking file: /etc/nsswitch.conf
#
# /etc/nsswitch.conf
#
# An example Name Service Switch config file. This file should be
# sorted with the most-used services at the beginning.
#
# The entry '[NOTFOUND=return]' means that the search for an
# entry should stop if the search in the previous entry turned
# up nothing. Note that if the search failed due to some other reason
# (like no NIS server responding) then the search continues with the
# next entry.
#
# Valid entries include:
#
# nisplus Use NIS+ (NIS version 3)
# nis Use NIS (NIS version 2), also called YP
# dns Use DNS (Domain Name Service)
# files Use the local files
# db Use the local database (.db) files
# compat Use NIS on compat mode
# hesiod Use Hesiod for user lookups
# [NOTFOUND=return] Stop searching if not found so far
#
# To use db, put the "db" in front of "files" for entries
you want to be
# looked up first in the databases
#
# Example:
#passwd: db files nisplus nis
#shadow: db files nisplus nis
#group: db files nisplus nis
passwd: files winbind
shadow: files winbind
group: files winbind
#initgroups: files
#hosts: db files nisplus nis dns
hosts: files dns myhostname
# Example - obey only what nisplus tells us...
#services: nisplus [NOTFOUND=return] files
#networks: nisplus [NOTFOUND=return] files
#protocols: nisplus [NOTFOUND=return] files
#rpc: nisplus [NOTFOUND=return] files
#ethers: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
bootparams: nisplus [NOTFOUND=return] files
ethers: files
netmasks: files
networks: files
protocols: files
rpc: files
services: files sss
netgroup: files sss
publickey: nisplus
automount: files sss
aliases: files nisplus
-----------
Checking file: /etc/samba/smb.conf
# Global parameters
[global]
netbios name = DC1
realm = ad.domain.DE
server services = s3fs, rpc, wrepl, ldap, cldap, kdc, drepl, winbindd,
ntp_signd, kcc, dnsupdate
workgroup = DOMAIN-02
logging =syslog
log level = 1 auth_audit:4 dsdb_password_audit:5
dsdb_transaction_audit:5 dsdb_group_audit:5
#log level = 3 auth_audit:4
server role = active directory domain controller
idmap_ldb:use rfc2307 = yes
template shell = /bin/bash
template homedir = /home/%U
#username map = /etc/samba/smbusers
#ntlm auth = yes
ntlm auth = mschapv2-and-ntlmv2-only
#rpc server dynamic port range = 1024-1300
disable netbios = yes
smb ports = 445
server min protocol = SMB2
client min protocol = SMB2
tls enabled = yes
tls keyfile = tls/server_de.key
tls certfile = tls/server.pem
tls cafile = tls/ca.pem
[netlogon]
path = /var/lib/samba/sysvol/ad.domain.de/scripts
read only = No
[sysvol]
path = /var/lib/samba/sysvol
read only = No
-----------
You have a user.map set in your smb.conf
This is not allowed because Samba is running as a DC
-----------
Detected bind DLZ enabled..
Warning, detected bind is enabled in smb.conf, but no /etc/bind
directory found
-----------
Installed packages:
-----------
##########named.conf###################
# /etc/named.conf
# Global BIND configuration options
include "/var/lib/samba/private/named.conf";
options {
tkey-gssapi-keytab "/var/lib/samba/private/dns.keytab";
auth-nxdomain yes;
directory "/var/named";
notify no;
empty-zones-enable no;
allow-query {
127.0.0.1;
192.168.0.0/16;
# add other networks you want to allow to query your DNS
};
allow-recursion {
192.168.0.0/16;
# add other networks you want to allow to do recursive queries
};
forwarders {
# Google public DNS server here - replace with your own if necessary
8.8.8.8;
8.8.4.4;
};
allow-transfer {
# this config is for a single master DNS server
none;
};
};
# Root servers (required zone for recursive queries)
zone "." {
type hint;
file "named.root";
};
# Required localhost forward-/reverse zones
zone "localhost" {
type master;
file "master/localhost.zone";
};
zone "0.0.127.in-addr.arpa" {
type master;
file "master/0.0.127.zone";
};
Am 27.02.20 um 09:53 schrieb L.P.H. van Belle via samba:> Ok, new test.
>
> Besides that i dont like the python errors shown, this still looks good.
> So i dont know.. See below, i can not make it error.
>
>
> for x in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ; do samba-tool dns add
dc1.internal.dom.tld $x.249.10.in-addr.arpa 158 PTR host-test.extrazone.dom.tld
; done
>
> Record added successfully
> Record added successfully
> Record added successfully
> Record added successfully
> Record added successfully
> ERROR: Zone does not exist; record coud not be added.
> ERROR: Zone does not exist; record could not be added.
> ERROR: Zone does not exist; record could not be added.
> ERROR: Zone does not exist; record could not be added.
> ERROR: Zone does not exist; record could not be added.
> ERROR: Zone does not exist; record could not be added.
> ERROR: Zone does not exist; record could not be added.
> ERROR: Zone does not exist; record could not be added.
> ERROR: Zone does not exist; record could not be added.
> ERROR: Zone does not exist; record could not be added.
> ERROR: Zone does not exist; record could not be added.
>
>
>
> for x in 0 1 2 3 4 5 6 7 ; do samba-tool dns add dc1.internal.dom.tld
$x.249.10.in-addr.arpa 158 PTR host-test.extrazone.dom.tld ; done
> ERROR(runtime): uncaught exception - (9711,
'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
> File "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py",
line 186, in _run
> return self.run(*args, **kwargs)
> File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
945, in run
> raise e
> File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
941, in run
> 0, server, zone, name, add_rec_buf, None)
> ERROR(runtime): uncaught exception - (9711,
'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
> File "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py",
line 186, in _run
> return self.run(*args, **kwargs)
> File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
945, in run
> raise e
> File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
941, in run
> 0, server, zone, name, add_rec_buf, None)
> ERROR(runtime): uncaught exception - (9711,
'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
> File "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py",
line 186, in _run
> return self.run(*args, **kwargs)
> File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
945, in run
> raise e
> File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
941, in run
> 0, server, zone, name, add_rec_buf, None)
> ERROR(runtime): uncaught exception - (9711,
'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
> File "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py",
line 186, in _run
> return self.run(*args, **kwargs)
> File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
945, in run
> raise e
> File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
941, in run
> 0, server, zone, name, add_rec_buf, None)
> ERROR(runtime): uncaught exception - (9711,
'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
> File "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py",
line 186, in _run
> return self.run(*args, **kwargs)
> File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
945, in run
> raise e
> File "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
941, in run
> 0, server, zone, name, add_rec_buf, None)
> ERROR: Zone does not exist; record could not be added.
> ERROR: Zone does not exist; record could not be added.
> ERROR: Zone does not exist; record could not be added.
>
> for x in 0 1 2 3 4 5 6 7 ; do nslookup 10.249.$x.158 ; done
> 158.0.249.10.in-addr.arpa name = host-test.extrazone.dom.tld.
>
> 158.1.249.10.in-addr.arpa name = host-test.extrazone.dom.tld.
>
> 158.2.249.10.in-addr.arpa name = host-test.extrazone.dom.tld.
>
> 158.3.249.10.in-addr.arpa name = host-test.extrazone.dom.tld.
>
> 158.4.249.10.in-addr.arpa name = host-test.extrazone.dom.tld.
>
> ** server can't find 158.5.249.10.in-addr.arpa: NXDOMAIN
>
> ** server can't find 158.6.249.10.in-addr.arpa: NXDOMAIN
>
> ** server can't find 158.7.249.10.in-addr.arpa: NXDOMAIN
>
>
> Other range since you mentioned, this was in 192.168.x zones.
> So here you go.
>
> for x in 0 1 2 3 4 5 6 ; do samba-tool dns zonecreate dc1.internal.dom.tld
$x.168.192.in-addr.arpa ; done
> Zone 0.168.192.in-addr.arpa created successfully
> Zone 1.168.192.in-addr.arpa created successfully
> Zone 2.168.192.in-addr.arpa created successfully
> Zone 3.168.192.in-addr.arpa created successfully
> Zone 4.168.192.in-addr.arpa created successfully
> Zone 5.168.192.in-addr.arpa created successfully
> Zone 6.168.192.in-addr.arpa created successfully
>
> for x in 0 1 2 3 4 5 6 ; do samba-tool dns add dc1.internal.dom.tld
$x.168.192.in-addr.arpa 1 PTR host-test.extrazone.dom.tld ; done
> Record added successfully
> Record added successfully
> Record added successfully
> Record added successfully
> Record added successfully
> Record added successfully
> Record added successfully
>
> for x in 0 1 2 3 4 5 6 ; do nslookup 192.168.$x.1 ; done
> 1.0.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
>
> 1.1.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
>
> 1.2.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
>
> 1.3.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
>
> 1.4.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
>
> 1.5.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
>
> 1.6.168.192.in-addr.arpa name = host-test.extrazone.dom.tld.
>
>
>
> Did you run my debugscript already, can you post it
> https://github.com/thctlo/samba4/raw/master/samba-collect-debug-info.sh
>
>
> Greetz,
>
> Louis
>
>
>
>
>
>
>
>
>> -----Oorspronkelijk bericht-----
>> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
>> Christian Naumer via samba
>> Verzonden: donderdag 27 februari 2020 9:24
>> Aan: samba at lists.samba.org
>> Onderwerp: Re: [Samba] New PTR records not visible
>>
>> Hi,
>> have you tried adding an entry to another host on 157? For me it only
>> produces the error with 0.168.192.in-addr.arpa and
>> 2.168.192.in-addr.arpa. Not with 1 or 3.
>>
>> Regards
>>
>> Christian
>>
>>
>> Am 27.02.20 um 08:42 schrieb L.P.H. van Belle via samba:
>>> Hai,
>>>
>>> Today i thought lets re-test this again.
>>> So this was done yesterday,
>>>
>>> samba-tool dns add dc1.internal.dom.tld
>> 2.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld
>>> samba-tool dns add dc1.internal.dom.tld
>> 0.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld
>>> samba-tool dns add dc1.internal.dom.tld
>> 1.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld
>>>
>>> I did keep the entries in the dns yesterday.
>>>
>>> Today :
>>>
>>> samba-tool dns add dc1.internal.dom.tld
>> 2.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld
>>> Password for [Administrator at REALM]:
>>> ERROR(runtime): uncaught exception - (9711,
>> 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS')
>>> File
>> "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py",
>> line 186, in _run
>>> return self.run(*args, **kwargs)
>>> File
>> "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
945, in run
>>> raise e
>>> File
>> "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line
941, in run
>>> 0, server, zone, name, add_rec_buf, None)
>>> # adding an extra on in "3"
>>> samba-tool dns add dc1.internal.dom.tld
>> 3.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld
>>> Password for [Administrator at REALM]:
>>> Record added successfully
>>>
>>> And i check all the reverse zones there dns records.
>>> All checked out ok.
>>>
>>> Sorry i can not make if fail here.
>>>
>>>
>>> Greetz,
>>>
>>> Louis
>>>
>>>
>>>> -----Oorspronkelijk bericht-----
>>>> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
>>>> Christian Naumer via samba
>>>> Verzonden: woensdag 26 februari 2020 15:54
>>>> Aan: samba at lists.samba.org
>>>> Onderwerp: Re: [Samba] New PTR records not visible
>>>>
>>>> Am 26.02.20 um 15:40 schrieb L.P.H. van Belle via samba:
>>>>> So strange..
>>>>>
>>>>> I copied your commando's only change the arpa and
>>>> servername / domainnames
>>>>> All worked.
>>>>
>>>> Have you checked that you have this situation?
>>>>
>>>> If this entry "192.168.2.157" exists and if you try
to add
>>>> "192.168.0.157" another entry to point to
"192.168.2.157" is added.
>>>>
>>>>
>>>>>
>>>>> So far nobody told how there ad-dc and DNS is setup..
>>>>> Which i why i added :
>>>>>>> Debian 10, my own packages.
>>>>>>> Samba 4.11.6 + BIND9_DLZ is used .
>>>>>
>>>>> Now are you using samba DNS or BIND_DLZ dns ?
>>>>
>>>> I am using BIND_DLZ. On Centos 7 with the Sernet Packages.
>>>>
>>>> Regards
>>>>
>>>> Christian
>>>>
>>>> --
>>>> Dr. Christian Naumer
>>>> Unit Head Bioprocess Development
>>>> B.R.A.I.N Aktiengesellschaft
>>>> Darmstaedter Str. 34-36, D-64673 Zwingenberg
>>>> e-mail cn at brain-biotech.com, homepage www.brain-biotech.com
>>>> fon +49-6251-9331-30 / fax +49-6251-9331-11
>>>>
>>>> Sitz der Gesellschaft: Zwingenberg/Bergstrasse
>>>> Registergericht AG Darmstadt, HRB 24758
>>>> Vorstand: Adriaan Moelker (Vorstandsvorsitzender),
>>>> Manfred Bender, Ludger Roedder
>>>> Aufsichtsratsvorsitzender: Dr. Georg Kellinghusen
>>>>
>>>> --
>>>> To unsubscribe from this list go to the following URL and read
the
>>>> instructions: https://lists.samba.org/mailman/options/samba
>>>>
>>>>
>>>
>>>
>>
>> --
>> Dr. Christian Naumer
>> Unit Head Bioprocess Development
>> B.R.A.I.N Aktiengesellschaft
>> Darmstaedter Str. 34-36, D-64673 Zwingenberg
>> e-mail cn at brain-biotech.com, homepage www.brain-biotech.com
>> fon +49-6251-9331-30 / fax +49-6251-9331-11
>>
>> Sitz der Gesellschaft: Zwingenberg/Bergstrasse
>> Registergericht AG Darmstadt, HRB 24758
>> Vorstand: Adriaan Moelker (Vorstandsvorsitzender),
>> Manfred Bender, Ludger Roedder
>> Aufsichtsratsvorsitzender: Dr. Georg Kellinghusen
>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions: https://lists.samba.org/mailman/options/samba
>>
>>
>
>
--
Dr. Christian Naumer
Unit Head Bioprocess Development
B.R.A.I.N Aktiengesellschaft
Darmstaedter Str. 34-36, D-64673 Zwingenberg
e-mail cn at brain-biotech.com, homepage www.brain-biotech.com
fon +49-6251-9331-30 / fax +49-6251-9331-11
Sitz der Gesellschaft: Zwingenberg/Bergstrasse
Registergericht AG Darmstadt, HRB 24758
Vorstand: Adriaan Moelker (Vorstandsvorsitzender),
Manfred Bender, Ludger Roedder
Aufsichtsratsvorsitzender: Dr. Georg Kellinghusen
> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Christian Naumer via samba > Verzonden: donderdag 27 februari 2020 10:33 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] New PTR records not visible > > Hello Louis, > thanks for looking into this. Have you looked at what the original > poster shared in the bug report? > > https://bugzilla.samba.org/show_bug.cgi?id=14268Yes, im also looking again at that one.> > I don't have a big problem with this, just trying to help.Which we very apriciate :-)> Maybe the original poster can say more with regards of the problem he > has with this. > > > here are more of my details.Thanks, now beside the few script errors due to your using centos, i'll ignore that. But you setup is "tumbs up" good, based on what i see i would not change much. But do verify this : > tkey-gssapi-keytab "/var/lib/samba/private/dns.keytab"; Later samba version use : tkey-gssapi-keytab "/var/lib/samba/bind-dns/dns.keytab"; as of samba 4.9+ So this keeps strange. Anyone else suggestion on debugging this, or to some verifications with Centos. So far, Greetz, Louis> > Regards > > > #####samba-debug-info.txt############## > Collected config --- 2020-02-27-10:17 ----------- > > Hostname: dc1 > DNS Domain: ad.domain.de > FQDN: DC1.ad.domain.de > ipaddress: 192.168.0.90 > > ----------- > > Kerberos SRV _kerberos._tcp.ad.domain.de record verified ok, > sample output: > Server: 192.168.0.90 > Address: 192.168.0.90#53 > > _kerberos._tcp.ad.domain.de service = 0 100 88 dc1.ad.domain.de. > _kerberos._tcp.ad.domain.de service = 0 100 88 dc3.ad.domain.de. > _kerberos._tcp.ad.domain.de service = 0 100 88 dc2.ad.domain.de. > _kerberos._tcp.ad.domain.de service = 0 100 88 dc4.ad.domain.de. > Samba is running as an AD DC > > ----------- > Checking file: /etc/os-release > > NAME="CentOS Linux" > VERSION="7 (Core)" > ID="centos" > ID_LIKE="rhel fedora" > VERSION_ID="7" > PRETTY_NAME="CentOS Linux 7 (Core)" > ANSI_COLOR="0;31" > CPE_NAME="cpe:/o:centos:centos:7" > HOME_URL="https://www.centos.org/" > BUG_REPORT_URL="https://bugs.centos.org/" > > CENTOS_MANTISBT_PROJECT="CentOS-7" > CENTOS_MANTISBT_PROJECT_VERSION="7" > REDHAT_SUPPORT_PRODUCT="centos" > REDHAT_SUPPORT_PRODUCT_VERSION="7" > > ----------- > > > This computer is running an unknown distribution x86_64 > > ----------- > running command : ip a > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > group default qlen 1000 > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > inet6 ::1/128 scope host > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP > group default qlen 1000 > link/ether 6e:48:a7:59:a3:e4 brd ff:ff:ff:ff:ff:ff > inet 192.168.0.90/21 brd 192.168.7.255 scope global eth0 > inet6 fe80::6c48:a7ff:fe59:a3e4/64 scope link > > ----------- > Checking file: /etc/hosts > > 127.0.0.1 localhost localhost.localdomain localhost4 > localhost4.localdomain4 > ::1 localhost localhost.localdomain localhost6 > localhost6.localdomain6 > 192.168.0.90 DC1.ad.domain.de DC1 > 192.168.0.91 DC2.ad.domain.de DC2 > 192.168.0.106 DC4.ad.domain.de DC4 > 192.168.0.190 DC3.ad.domain.de DC3 > > ----------- > > Checking file: /etc/resolv.conf > > # Generated by NetworkManager > search ad.domain.de domain.de domain.com domain.de. > domain.com. domain.de > nameserver 192.168.0.90 > nameserver 192.168.0.91 > nameserver 192.168.0.106 > > ----------- > > Checking file: /etc/krb5.conf > > [logging] > default = FILE:/var/log/krb5libs.log > kdc = FILE:/var/log/krb5kdc.log > admin_server = FILE:/var/log/kadmind.log > > [libdefaults] > default_realm = ad.domain.DE > dns_lookup_realm = true > dns_lookup_kdc = true > ticket_lifetime = 24h > renew_lifetime = 7d > forwardable = true > > ----------- > > Checking file: /etc/nsswitch.conf > > # > # /etc/nsswitch.conf > # > # An example Name Service Switch config file. This file should be > # sorted with the most-used services at the beginning. > # > # The entry '[NOTFOUND=return]' means that the search for an > # entry should stop if the search in the previous entry turned > # up nothing. Note that if the search failed due to some other reason > # (like no NIS server responding) then the search continues with the > # next entry. > # > # Valid entries include: > # > # nisplus Use NIS+ (NIS version 3) > # nis Use NIS (NIS version 2), also called YP > # dns Use DNS (Domain Name Service) > # files Use the local files > # db Use the local database (.db) files > # compat Use NIS on compat mode > # hesiod Use Hesiod for user lookups > # [NOTFOUND=return] Stop searching if not found so far > # > > # To use db, put the "db" in front of "files" for entries you > want to be > # looked up first in the databases > # > # Example: > #passwd: db files nisplus nis > #shadow: db files nisplus nis > #group: db files nisplus nis > > passwd: files winbind > shadow: files winbind > group: files winbind > #initgroups: files > > #hosts: db files nisplus nis dns > hosts: files dns myhostname > > # Example - obey only what nisplus tells us... > #services: nisplus [NOTFOUND=return] files > #networks: nisplus [NOTFOUND=return] files > #protocols: nisplus [NOTFOUND=return] files > #rpc: nisplus [NOTFOUND=return] files > #ethers: nisplus [NOTFOUND=return] files > #netmasks: nisplus [NOTFOUND=return] files > > bootparams: nisplus [NOTFOUND=return] files > > ethers: files > netmasks: files > networks: files > protocols: files > rpc: files > services: files sss > > netgroup: files sss > > publickey: nisplus > > automount: files sss > aliases: files nisplus > > ----------- > > Checking file: /etc/samba/smb.conf > > # Global parameters > [global] > netbios name = DC1 > realm = ad.domain.DE > server services = s3fs, rpc, wrepl, ldap, cldap, kdc, > drepl, winbindd, > ntp_signd, kcc, dnsupdate > workgroup = DOMAIN-02 > logging =syslog > log level = 1 auth_audit:4 dsdb_password_audit:5 > dsdb_transaction_audit:5 dsdb_group_audit:5 > #log level = 3 auth_audit:4 > server role = active directory domain controller > idmap_ldb:use rfc2307 = yes > template shell = /bin/bash > template homedir = /home/%U > #username map = /etc/samba/smbusers > #ntlm auth = yes > ntlm auth = mschapv2-and-ntlmv2-only > #rpc server dynamic port range = 1024-1300 > disable netbios = yes > smb ports = 445 > server min protocol = SMB2 > client min protocol = SMB2 > tls enabled = yes > tls keyfile = tls/server_de.key > tls certfile = tls/server.pem > tls cafile = tls/ca.pem > > [netlogon] > path = /var/lib/samba/sysvol/ad.domain.de/scripts > read only = No > > [sysvol] > path = /var/lib/samba/sysvol > read only = No > > ----------- > > You have a user.map set in your smb.conf > This is not allowed because Samba is running as a DC > > ----------- > Detected bind DLZ enabled.. > > Warning, detected bind is enabled in smb.conf, but no /etc/bind > directory found > > ----------- > > Installed packages: > > > ----------- > ##########named.conf################### > > # /etc/named.conf > # Global BIND configuration options > include "/var/lib/samba/private/named.conf"; > options { > tkey-gssapi-keytab "/var/lib/samba/private/dns.keytab"; > auth-nxdomain yes; > directory "/var/named"; > notify no; > empty-zones-enable no; > > allow-query { > 127.0.0.1; > 192.168.0.0/16; > # add other networks you want to allow to query your DNS > }; > > allow-recursion { > 192.168.0.0/16; > # add other networks you want to allow to do recursive queries > }; > > forwarders { > # Google public DNS server here - replace with your > own if necessary > 8.8.8.8; > 8.8.4.4; > }; > > allow-transfer { > # this config is for a single master DNS server > none; > }; > > }; > > > # Root servers (required zone for recursive queries) > zone "." { > type hint; > file "named.root"; > }; > > # Required localhost forward-/reverse zones > zone "localhost" { > type master; > file "master/localhost.zone"; > }; > zone "0.0.127.in-addr.arpa" { > type master; > file "master/0.0.127.zone"; > }; > > > Am 27.02.20 um 09:53 schrieb L.P.H. van Belle via samba: > > Ok, new test. > > > > Besides that i dont like the python errors shown, this > still looks good. > > So i dont know.. See below, i can not make it error. > > > > > > for x in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ; do > samba-tool dns add dc1.internal.dom.tld > $x.249.10.in-addr.arpa 158 PTR host-test.extrazone.dom.tld ; done > > > > Record added successfully > > Record added successfully > > Record added successfully > > Record added successfully > > Record added successfully > > ERROR: Zone does not exist; record coud not be added. > > ERROR: Zone does not exist; record could not be added. > > ERROR: Zone does not exist; record could not be added. > > ERROR: Zone does not exist; record could not be added. > > ERROR: Zone does not exist; record could not be added. > > ERROR: Zone does not exist; record could not be added. > > ERROR: Zone does not exist; record could not be added. > > ERROR: Zone does not exist; record could not be added. > > ERROR: Zone does not exist; record could not be added. > > ERROR: Zone does not exist; record could not be added. > > ERROR: Zone does not exist; record could not be added. > > > > > > > > for x in 0 1 2 3 4 5 6 7 ; do samba-tool dns add > dc1.internal.dom.tld $x.249.10.in-addr.arpa 158 PTR > host-test.extrazone.dom.tld ; done > > ERROR(runtime): uncaught exception - (9711, > 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > > File > "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > line 186, in _run > > return self.run(*args, **kwargs) > > File > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 945, in run > > raise e > > File > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 941, in run > > 0, server, zone, name, add_rec_buf, None) > > ERROR(runtime): uncaught exception - (9711, > 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > > File > "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > line 186, in _run > > return self.run(*args, **kwargs) > > File > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 945, in run > > raise e > > File > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 941, in run > > 0, server, zone, name, add_rec_buf, None) > > ERROR(runtime): uncaught exception - (9711, > 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > > File > "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > line 186, in _run > > return self.run(*args, **kwargs) > > File > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 945, in run > > raise e > > File > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 941, in run > > 0, server, zone, name, add_rec_buf, None) > > ERROR(runtime): uncaught exception - (9711, > 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > > File > "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > line 186, in _run > > return self.run(*args, **kwargs) > > File > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 945, in run > > raise e > > File > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 941, in run > > 0, server, zone, name, add_rec_buf, None) > > ERROR(runtime): uncaught exception - (9711, > 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > > File > "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > line 186, in _run > > return self.run(*args, **kwargs) > > File > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 945, in run > > raise e > > File > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line 941, in run > > 0, server, zone, name, add_rec_buf, None) > > ERROR: Zone does not exist; record could not be added. > > ERROR: Zone does not exist; record could not be added. > > ERROR: Zone does not exist; record could not be added. > > > > for x in 0 1 2 3 4 5 6 7 ; do nslookup 10.249.$x.158 ; done > > 158.0.249.10.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > 158.1.249.10.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > 158.2.249.10.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > 158.3.249.10.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > 158.4.249.10.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > ** server can't find 158.5.249.10.in-addr.arpa: NXDOMAIN > > > > ** server can't find 158.6.249.10.in-addr.arpa: NXDOMAIN > > > > ** server can't find 158.7.249.10.in-addr.arpa: NXDOMAIN > > > > > > Other range since you mentioned, this was in 192.168.x zones. > > So here you go. > > > > for x in 0 1 2 3 4 5 6 ; do samba-tool dns zonecreate > dc1.internal.dom.tld $x.168.192.in-addr.arpa ; done > > Zone 0.168.192.in-addr.arpa created successfully > > Zone 1.168.192.in-addr.arpa created successfully > > Zone 2.168.192.in-addr.arpa created successfully > > Zone 3.168.192.in-addr.arpa created successfully > > Zone 4.168.192.in-addr.arpa created successfully > > Zone 5.168.192.in-addr.arpa created successfully > > Zone 6.168.192.in-addr.arpa created successfully > > > > for x in 0 1 2 3 4 5 6 ; do samba-tool dns add > dc1.internal.dom.tld $x.168.192.in-addr.arpa 1 PTR > host-test.extrazone.dom.tld ; done > > Record added successfully > > Record added successfully > > Record added successfully > > Record added successfully > > Record added successfully > > Record added successfully > > Record added successfully > > > > for x in 0 1 2 3 4 5 6 ; do nslookup 192.168.$x.1 ; done > > 1.0.168.192.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > 1.1.168.192.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > 1.2.168.192.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > 1.3.168.192.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > 1.4.168.192.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > 1.5.168.192.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > 1.6.168.192.in-addr.arpa name = host-test.extrazone.dom.tld. > > > > > > > > Did you run my debugscript already, can you post it > > > https://github.com/thctlo/samba4/raw/master/samba-collect-debu > g-info.sh > > > > > > Greetz, > > > > Louis > > > > > > > > > > > > > > > > > >> -----Oorspronkelijk bericht----- > >> Van: samba [mailto:samba-bounces at lists.samba.org] Namens > >> Christian Naumer via samba > >> Verzonden: donderdag 27 februari 2020 9:24 > >> Aan: samba at lists.samba.org > >> Onderwerp: Re: [Samba] New PTR records not visible > >> > >> Hi, > >> have you tried adding an entry to another host on 157? For > me it only > >> produces the error with 0.168.192.in-addr.arpa and > >> 2.168.192.in-addr.arpa. Not with 1 or 3. > >> > >> Regards > >> > >> Christian > >> > >> > >> Am 27.02.20 um 08:42 schrieb L.P.H. van Belle via samba: > >>> Hai, > >>> > >>> Today i thought lets re-test this again. > >>> So this was done yesterday, > >>> > >>> samba-tool dns add dc1.internal.dom.tld > >> 2.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld > >>> samba-tool dns add dc1.internal.dom.tld > >> 0.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld > >>> samba-tool dns add dc1.internal.dom.tld > >> 1.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld > >>> > >>> I did keep the entries in the dns yesterday. > >>> > >>> Today : > >>> > >>> samba-tool dns add dc1.internal.dom.tld > >> 2.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld > >>> Password for [Administrator at REALM]: > >>> ERROR(runtime): uncaught exception - (9711, > >> 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > >>> File > >> "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > >> line 186, in _run > >>> return self.run(*args, **kwargs) > >>> File > >> "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 945, in run > >>> raise e > >>> File > >> "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 941, in run > >>> 0, server, zone, name, add_rec_buf, None) > >>> # adding an extra on in "3" > >>> samba-tool dns add dc1.internal.dom.tld > >> 3.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld > >>> Password for [Administrator at REALM]: > >>> Record added successfully > >>> > >>> And i check all the reverse zones there dns records. > >>> All checked out ok. > >>> > >>> Sorry i can not make if fail here. > >>> > >>> > >>> Greetz, > >>> > >>> Louis > >>> > >>> > >>>> -----Oorspronkelijk bericht----- > >>>> Van: samba [mailto:samba-bounces at lists.samba.org] Namens > >>>> Christian Naumer via samba > >>>> Verzonden: woensdag 26 februari 2020 15:54 > >>>> Aan: samba at lists.samba.org > >>>> Onderwerp: Re: [Samba] New PTR records not visible > >>>> > >>>> Am 26.02.20 um 15:40 schrieb L.P.H. van Belle via samba: > >>>>> So strange.. > >>>>> > >>>>> I copied your commando's only change the arpa and > >>>> servername / domainnames > >>>>> All worked. > >>>> > >>>> Have you checked that you have this situation? > >>>> > >>>> If this entry "192.168.2.157" exists and if you try to add > >>>> "192.168.0.157" another entry to point to > "192.168.2.157" is added. > >>>> > >>>> > >>>>> > >>>>> So far nobody told how there ad-dc and DNS is setup.. > >>>>> Which i why i added : > >>>>>>> Debian 10, my own packages. > >>>>>>> Samba 4.11.6 + BIND9_DLZ is used . > >>>>> > >>>>> Now are you using samba DNS or BIND_DLZ dns ? > >>>> > >>>> I am using BIND_DLZ. On Centos 7 with the Sernet Packages. > >>>> > >>>> Regards > >>>> > >>>> Christian > >>>> > >>>> --
Am 27.02.20 um 10:48 schrieb L.P.H. van Belle via samba:> Thanks, now beside the few script errors due to your using centos, i'll ignore that. > But you setup is "tumbs up" good, based on what i see i would not change much. > > But do verify this : > tkey-gssapi-keytab "/var/lib/samba/private/dns.keytab"; > Later samba version use : tkey-gssapi-keytab "/var/lib/samba/bind-dns/dns.keytab"; > as of samba 4.9+As this was provisioned with 4.4 the keytap is "/var/lib/samba/private/dns.keytab". I am aware of this but since DNS updates are working just fine I haven't changed this. Regards Christian -- Dr. Christian Naumer Unit Head Bioprocess Development B.R.A.I.N Aktiengesellschaft Darmstaedter Str. 34-36, D-64673 Zwingenberg e-mail cn at brain-biotech.com, homepage www.brain-biotech.com fon +49-6251-9331-30 / fax +49-6251-9331-11 Sitz der Gesellschaft: Zwingenberg/Bergstrasse Registergericht AG Darmstadt, HRB 24758 Vorstand: Adriaan Moelker (Vorstandsvorsitzender), Manfred Bender, Ludger Roedder Aufsichtsratsvorsitzender: Dr. Georg Kellinghusen
Ok, we might have found something here. I created a small script, see below, easy to adapt. So, after running this i see the same problem as in : https://bugzilla.samba.org/show_bug.cgi?id=14268 If i do it manualy everything works fine. But if i "past the commands or run the script" Then i see this problem.. So im thinking here, the speed of adding is creating somekind or problem. @Rowland, you any ideas? And if others can test this and post there samba version and os, that would be nice. Tested as shown in bugzilla: Debian 10 , with samba 4.11.6 + bind_DLZ. My packages. Centos 7 , with samba 4.11.6 + bind_DLZ. Sernet packages. We need few 4.10.x tests also Run this 2 times or three.. Change the ipnumbers and zone names your creating. I also tested below with between every line a : sleep 0.1 Same results, wrong results. #!bin/bash # Run this script 2 times!! DC_FQDN="$(hostname -f)" DC_NAME="$(hostname -s)" # After the first run change the "test1/test2 to test01/test02" # and run it again. ZONE_TEST1="test1.domain.tld" ZONE_TEST2="test2.domain.tld" ZONE_ARPA="0.168.192" ZONE_IP="192.168.0" #kinit Administrator !! AUTH before you run this script. # Create zone # test with FQDN samba-tool dns zonecreate $DC_FQDN $ZONE_TEST1 # test with NAME samba-tool dns zonecreate $DC_NAME $ZONE_TEST2 # Create reverse zone samba-tool dns zonecreate $DC_FQDN $ZONE_ARPA.in-addr.arpa # Create A record samba-tool dns add $DC_FQDN $ZONE_TEST1 testa1 A ZONE_IP.1 samba-tool dns add $DC_FQDN $ZONE_TEST1 testc1 CNAME testa1.$ZONE_TEST1 samba-tool dns add $DC_FQDN $ZONE_TEST1 testa2 A ZONE_IP.2 samba-tool dns add $DC_FQDN $ZONE_TEST1 testc2 CNAME testa2.$ZONE_TEST1 samba-tool dns add $DC_FQDN $ZONE_TEST1 testa3 A ZONE_IP.3 samba-tool dns add $DC_FQDN $ZONE_TEST1 testc3 CNAME testa3.$ZONE_TEST1 samba-tool dns add $DC_FQDN $ZONE_TEST1 testa4 A ZONE_IP.4 samba-tool dns add $DC_FQDN $ZONE_TEST1 testc4 CNAME testa4.$ZONE_TEST1 samba-tool dns add $DC_FQDN $ZONE_TEST1 testa5 A ZONE_IP.5 samba-tool dns add $DC_FQDN $ZONE_TEST1 testc5 CNAME testa5.$ZONE_TEST1 samba-tool dns add $DC_FQDN $ZONE_TEST1 testa6 A ZONE_IP.6 samba-tool dns add $DC_FQDN $ZONE_TEST1 testc6 CNAME testa6.$ZONE_TEST1 samba-tool dns add $DC_FQDN $ZONE_TEST1 testa7 A ZONE_IP.7 samba-tool dns add $DC_FQDN $ZONE_TEST1 testc7 CNAME testa7.$ZONE_TEST1 samba-tool dns add $DC_FQDN $ZONE_TEST1 testa8 A ZONE_IP.8 samba-tool dns add $DC_FQDN $ZONE_TEST1 testc8 CNAME testa8.$ZONE_TEST1 samba-tool dns add $DC_FQDN $ZONE_TEST1 testa9 A ZONE_IP.9 samba-tool dns add $DC_FQDN $ZONE_TEST1 testc9 CNAME testa9.$ZONE_TEST1 samba-tool dns add $DC_FQDN $ZONE_TEST1 testa10 A ZONE_IP.10 samba-tool dns add $DC_FQDN $ZONE_TEST1 testc10 CNAME testa10.$ZONE_TEST1 samba-tool dns add $DC_NAME $ZONE_TEST2 testa1 A ZONE_IP.1 samba-tool dns add $DC_NAME $ZONE_TEST2 testc1 CNAME testa1.$ZONE_TEST2 samba-tool dns add $DC_NAME $ZONE_TEST2 testa2 A ZONE_IP.2 samba-tool dns add $DC_NAME $ZONE_TEST2 testc2 CNAME testa2.$ZONE_TEST2 samba-tool dns add $DC_NAME $ZONE_TEST2 testa3 A ZONE_IP.3 samba-tool dns add $DC_NAME $ZONE_TEST2 testc3 CNAME testa3.$ZONE_TEST2 samba-tool dns add $DC_NAME $ZONE_TEST2 testa4 A ZONE_IP.4 samba-tool dns add $DC_NAME $ZONE_TEST2 testc4 CNAME testa4.$ZONE_TEST2 samba-tool dns add $DC_NAME $ZONE_TEST2 testa5 A ZONE_IP.5 samba-tool dns add $DC_NAME $ZONE_TEST2 testc5 CNAME testa5.$ZONE_TEST2 samba-tool dns add $DC_NAME $ZONE_TEST2 testa6 A ZONE_IP.6 samba-tool dns add $DC_NAME $ZONE_TEST2 testc6 CNAME testa6.$ZONE_TEST2 samba-tool dns add $DC_NAME $ZONE_TEST2 testa7 A ZONE_IP.7 samba-tool dns add $DC_NAME $ZONE_TEST2 testc7 CNAME testa7.$ZONE_TEST2 samba-tool dns add $DC_NAME $ZONE_TEST2 testa8 A ZONE_IP.8 samba-tool dns add $DC_NAME $ZONE_TEST2 testc8 CNAME testa8.$ZONE_TEST2 samba-tool dns add $DC_NAME $ZONE_TEST2 testa9 A ZONE_IP.9 samba-tool dns add $DC_NAME $ZONE_TEST2 testc9 CNAME testa9.$ZONE_TEST2 samba-tool dns add $DC_NAME $ZONE_TEST2 testa10 A ZONE_IP.10 samba-tool dns add $DC_NAME $ZONE_TEST2 testc10 CNAME testa10.$ZONE_TEST2 # Query samba-tool dns query $DC_FQDN $ZONE_TEST1 $ZONE_TEST1 all samba-tool dns query $DC_NAME $ZONE_TEST2 $ZONE_TEST2 all ## My results Zone test1 : shows 10 A records and 25 CNAMES Zone test2 : shows 5 A records and 5 CNAMES Zone test01 : shows 5 A records and 5 CNAMES Zone test02 : shows 5 A records and 5 CNAMES So yes, there is something going wrong here. I'll update the bug report. Greetz, Louis> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > L.P.H. van Belle via samba > Verzonden: donderdag 27 februari 2020 10:48 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] New PTR records not visible > > > > > -----Oorspronkelijk bericht----- > > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > > Christian Naumer via samba > > Verzonden: donderdag 27 februari 2020 10:33 > > Aan: samba at lists.samba.org > > Onderwerp: Re: [Samba] New PTR records not visible > > > > Hello Louis, > > thanks for looking into this. Have you looked at what the original > > poster shared in the bug report? > > > > https://bugzilla.samba.org/show_bug.cgi?id=14268 > > Yes, im also looking again at that one. > > > > > I don't have a big problem with this, just trying to help. > Which we very apriciate :-) > > > Maybe the original poster can say more with regards of the > problem he > > has with this. > > > > > > here are more of my details. > Thanks, now beside the few script errors due to your using > centos, i'll ignore that. > But you setup is "tumbs up" good, based on what i see i would > not change much. > > But do verify this : > tkey-gssapi-keytab > "/var/lib/samba/private/dns.keytab"; > Later samba version use : tkey-gssapi-keytab > "/var/lib/samba/bind-dns/dns.keytab"; > as of samba 4.9+ > > So this keeps strange. > Anyone else suggestion on debugging this, or to some > verifications with Centos. > > > So far, > > Greetz, > > Louis > > > > > > > Regards > > > > > > #####samba-debug-info.txt############## > > Collected config --- 2020-02-27-10:17 ----------- > > > > Hostname: dc1 > > DNS Domain: ad.domain.de > > FQDN: DC1.ad.domain.de > > ipaddress: 192.168.0.90 > > > > ----------- > > > > Kerberos SRV _kerberos._tcp.ad.domain.de record verified ok, > > sample output: > > Server: 192.168.0.90 > > Address: 192.168.0.90#53 > > > > _kerberos._tcp.ad.domain.de service = 0 100 88 dc1.ad.domain.de. > > _kerberos._tcp.ad.domain.de service = 0 100 88 dc3.ad.domain.de. > > _kerberos._tcp.ad.domain.de service = 0 100 88 dc2.ad.domain.de. > > _kerberos._tcp.ad.domain.de service = 0 100 88 dc4.ad.domain.de. > > Samba is running as an AD DC > > > > ----------- > > Checking file: /etc/os-release > > > > NAME="CentOS Linux" > > VERSION="7 (Core)" > > ID="centos" > > ID_LIKE="rhel fedora" > > VERSION_ID="7" > > PRETTY_NAME="CentOS Linux 7 (Core)" > > ANSI_COLOR="0;31" > > CPE_NAME="cpe:/o:centos:centos:7" > > HOME_URL="https://www.centos.org/" > > BUG_REPORT_URL="https://bugs.centos.org/" > > > > CENTOS_MANTISBT_PROJECT="CentOS-7" > > CENTOS_MANTISBT_PROJECT_VERSION="7" > > REDHAT_SUPPORT_PRODUCT="centos" > > REDHAT_SUPPORT_PRODUCT_VERSION="7" > > > > ----------- > > > > > > This computer is running an unknown distribution x86_64 > > > > ----------- > > running command : ip a > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > > group default qlen 1000 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > inet6 ::1/128 scope host > > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > mq state UP > > group default qlen 1000 > > link/ether 6e:48:a7:59:a3:e4 brd ff:ff:ff:ff:ff:ff > > inet 192.168.0.90/21 brd 192.168.7.255 scope global eth0 > > inet6 fe80::6c48:a7ff:fe59:a3e4/64 scope link > > > > ----------- > > Checking file: /etc/hosts > > > > 127.0.0.1 localhost localhost.localdomain localhost4 > > localhost4.localdomain4 > > ::1 localhost localhost.localdomain localhost6 > > localhost6.localdomain6 > > 192.168.0.90 DC1.ad.domain.de DC1 > > 192.168.0.91 DC2.ad.domain.de DC2 > > 192.168.0.106 DC4.ad.domain.de DC4 > > 192.168.0.190 DC3.ad.domain.de DC3 > > > > ----------- > > > > Checking file: /etc/resolv.conf > > > > # Generated by NetworkManager > > search ad.domain.de domain.de domain.com domain.de. > > domain.com. domain.de > > nameserver 192.168.0.90 > > nameserver 192.168.0.91 > > nameserver 192.168.0.106 > > > > ----------- > > > > Checking file: /etc/krb5.conf > > > > [logging] > > default = FILE:/var/log/krb5libs.log > > kdc = FILE:/var/log/krb5kdc.log > > admin_server = FILE:/var/log/kadmind.log > > > > [libdefaults] > > default_realm = ad.domain.DE > > dns_lookup_realm = true > > dns_lookup_kdc = true > > ticket_lifetime = 24h > > renew_lifetime = 7d > > forwardable = true > > > > ----------- > > > > Checking file: /etc/nsswitch.conf > > > > # > > # /etc/nsswitch.conf > > # > > # An example Name Service Switch config file. This file should be > > # sorted with the most-used services at the beginning. > > # > > # The entry '[NOTFOUND=return]' means that the search for an > > # entry should stop if the search in the previous entry turned > > # up nothing. Note that if the search failed due to some > other reason > > # (like no NIS server responding) then the search continues with the > > # next entry. > > # > > # Valid entries include: > > # > > # nisplus Use NIS+ (NIS version 3) > > # nis Use NIS (NIS version 2), also called YP > > # dns Use DNS (Domain Name Service) > > # files Use the local files > > # db Use the local database (.db) files > > # compat Use NIS on compat mode > > # hesiod Use Hesiod for user lookups > > # [NOTFOUND=return] Stop searching if not found so far > > # > > > > # To use db, put the "db" in front of "files" for entries you > > want to be > > # looked up first in the databases > > # > > # Example: > > #passwd: db files nisplus nis > > #shadow: db files nisplus nis > > #group: db files nisplus nis > > > > passwd: files winbind > > shadow: files winbind > > group: files winbind > > #initgroups: files > > > > #hosts: db files nisplus nis dns > > hosts: files dns myhostname > > > > # Example - obey only what nisplus tells us... > > #services: nisplus [NOTFOUND=return] files > > #networks: nisplus [NOTFOUND=return] files > > #protocols: nisplus [NOTFOUND=return] files > > #rpc: nisplus [NOTFOUND=return] files > > #ethers: nisplus [NOTFOUND=return] files > > #netmasks: nisplus [NOTFOUND=return] files > > > > bootparams: nisplus [NOTFOUND=return] files > > > > ethers: files > > netmasks: files > > networks: files > > protocols: files > > rpc: files > > services: files sss > > > > netgroup: files sss > > > > publickey: nisplus > > > > automount: files sss > > aliases: files nisplus > > > > ----------- > > > > Checking file: /etc/samba/smb.conf > > > > # Global parameters > > [global] > > netbios name = DC1 > > realm = ad.domain.DE > > server services = s3fs, rpc, wrepl, ldap, cldap, kdc, > > drepl, winbindd, > > ntp_signd, kcc, dnsupdate > > workgroup = DOMAIN-02 > > logging =syslog > > log level = 1 auth_audit:4 dsdb_password_audit:5 > > dsdb_transaction_audit:5 dsdb_group_audit:5 > > #log level = 3 auth_audit:4 > > server role = active directory domain controller > > idmap_ldb:use rfc2307 = yes > > template shell = /bin/bash > > template homedir = /home/%U > > #username map = /etc/samba/smbusers > > #ntlm auth = yes > > ntlm auth = mschapv2-and-ntlmv2-only > > #rpc server dynamic port range = 1024-1300 > > disable netbios = yes > > smb ports = 445 > > server min protocol = SMB2 > > client min protocol = SMB2 > > tls enabled = yes > > tls keyfile = tls/server_de.key > > tls certfile = tls/server.pem > > tls cafile = tls/ca.pem > > > > [netlogon] > > path = /var/lib/samba/sysvol/ad.domain.de/scripts > > read only = No > > > > [sysvol] > > path = /var/lib/samba/sysvol > > read only = No > > > > ----------- > > > > You have a user.map set in your smb.conf > > This is not allowed because Samba is running as a DC > > > > ----------- > > Detected bind DLZ enabled.. > > > > Warning, detected bind is enabled in smb.conf, but no /etc/bind > > directory found > > > > ----------- > > > > Installed packages: > > > > > > ----------- > > ##########named.conf################### > > > > # /etc/named.conf > > # Global BIND configuration options > > include "/var/lib/samba/private/named.conf"; > > options { > > tkey-gssapi-keytab "/var/lib/samba/private/dns.keytab"; > > auth-nxdomain yes; > > directory "/var/named"; > > notify no; > > empty-zones-enable no; > > > > allow-query { > > 127.0.0.1; > > 192.168.0.0/16; > > # add other networks you want to allow to query your DNS > > }; > > > > allow-recursion { > > 192.168.0.0/16; > > # add other networks you want to allow to do > recursive queries > > }; > > > > forwarders { > > # Google public DNS server here - replace with your > > own if necessary > > 8.8.8.8; > > 8.8.4.4; > > }; > > > > allow-transfer { > > # this config is for a single master DNS server > > none; > > }; > > > > }; > > > > > > # Root servers (required zone for recursive queries) > > zone "." { > > type hint; > > file "named.root"; > > }; > > > > # Required localhost forward-/reverse zones > > zone "localhost" { > > type master; > > file "master/localhost.zone"; > > }; > > zone "0.0.127.in-addr.arpa" { > > type master; > > file "master/0.0.127.zone"; > > }; > > > > > > Am 27.02.20 um 09:53 schrieb L.P.H. van Belle via samba: > > > Ok, new test. > > > > > > Besides that i dont like the python errors shown, this > > still looks good. > > > So i dont know.. See below, i can not make it error. > > > > > > > > > for x in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ; do > > samba-tool dns add dc1.internal.dom.tld > > $x.249.10.in-addr.arpa 158 PTR host-test.extrazone.dom.tld ; done > > > > > > Record added successfully > > > Record added successfully > > > Record added successfully > > > Record added successfully > > > Record added successfully > > > ERROR: Zone does not exist; record coud not be added. > > > ERROR: Zone does not exist; record could not be added. > > > ERROR: Zone does not exist; record could not be added. > > > ERROR: Zone does not exist; record could not be added. > > > ERROR: Zone does not exist; record could not be added. > > > ERROR: Zone does not exist; record could not be added. > > > ERROR: Zone does not exist; record could not be added. > > > ERROR: Zone does not exist; record could not be added. > > > ERROR: Zone does not exist; record could not be added. > > > ERROR: Zone does not exist; record could not be added. > > > ERROR: Zone does not exist; record could not be added. > > > > > > > > > > > > for x in 0 1 2 3 4 5 6 7 ; do samba-tool dns add > > dc1.internal.dom.tld $x.249.10.in-addr.arpa 158 PTR > > host-test.extrazone.dom.tld ; done > > > ERROR(runtime): uncaught exception - (9711, > > 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > > line 186, in _run > > > return self.run(*args, **kwargs) > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 945, in run > > > raise e > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 941, in run > > > 0, server, zone, name, add_rec_buf, None) > > > ERROR(runtime): uncaught exception - (9711, > > 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > > line 186, in _run > > > return self.run(*args, **kwargs) > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 945, in run > > > raise e > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 941, in run > > > 0, server, zone, name, add_rec_buf, None) > > > ERROR(runtime): uncaught exception - (9711, > > 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > > line 186, in _run > > > return self.run(*args, **kwargs) > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 945, in run > > > raise e > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 941, in run > > > 0, server, zone, name, add_rec_buf, None) > > > ERROR(runtime): uncaught exception - (9711, > > 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > > line 186, in _run > > > return self.run(*args, **kwargs) > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 945, in run > > > raise e > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 941, in run > > > 0, server, zone, name, add_rec_buf, None) > > > ERROR(runtime): uncaught exception - (9711, > > 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > > line 186, in _run > > > return self.run(*args, **kwargs) > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 945, in run > > > raise e > > > File > > "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > 941, in run > > > 0, server, zone, name, add_rec_buf, None) > > > ERROR: Zone does not exist; record could not be added. > > > ERROR: Zone does not exist; record could not be added. > > > ERROR: Zone does not exist; record could not be added. > > > > > > for x in 0 1 2 3 4 5 6 7 ; do nslookup 10.249.$x.158 ; done > > > 158.0.249.10.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > 158.1.249.10.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > 158.2.249.10.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > 158.3.249.10.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > 158.4.249.10.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > ** server can't find 158.5.249.10.in-addr.arpa: NXDOMAIN > > > > > > ** server can't find 158.6.249.10.in-addr.arpa: NXDOMAIN > > > > > > ** server can't find 158.7.249.10.in-addr.arpa: NXDOMAIN > > > > > > > > > Other range since you mentioned, this was in 192.168.x zones. > > > So here you go. > > > > > > for x in 0 1 2 3 4 5 6 ; do samba-tool dns zonecreate > > dc1.internal.dom.tld $x.168.192.in-addr.arpa ; done > > > Zone 0.168.192.in-addr.arpa created successfully > > > Zone 1.168.192.in-addr.arpa created successfully > > > Zone 2.168.192.in-addr.arpa created successfully > > > Zone 3.168.192.in-addr.arpa created successfully > > > Zone 4.168.192.in-addr.arpa created successfully > > > Zone 5.168.192.in-addr.arpa created successfully > > > Zone 6.168.192.in-addr.arpa created successfully > > > > > > for x in 0 1 2 3 4 5 6 ; do samba-tool dns add > > dc1.internal.dom.tld $x.168.192.in-addr.arpa 1 PTR > > host-test.extrazone.dom.tld ; done > > > Record added successfully > > > Record added successfully > > > Record added successfully > > > Record added successfully > > > Record added successfully > > > Record added successfully > > > Record added successfully > > > > > > for x in 0 1 2 3 4 5 6 ; do nslookup 192.168.$x.1 ; done > > > 1.0.168.192.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > 1.1.168.192.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > 1.2.168.192.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > 1.3.168.192.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > 1.4.168.192.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > 1.5.168.192.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > 1.6.168.192.in-addr.arpa name = > host-test.extrazone.dom.tld. > > > > > > > > > > > > Did you run my debugscript already, can you post it > > > > > https://github.com/thctlo/samba4/raw/master/samba-collect-debu > > g-info.sh > > > > > > > > > Greetz, > > > > > > Louis > > > > > > > > > > > > > > > > > > > > > > > > > > >> -----Oorspronkelijk bericht----- > > >> Van: samba [mailto:samba-bounces at lists.samba.org] Namens > > >> Christian Naumer via samba > > >> Verzonden: donderdag 27 februari 2020 9:24 > > >> Aan: samba at lists.samba.org > > >> Onderwerp: Re: [Samba] New PTR records not visible > > >> > > >> Hi, > > >> have you tried adding an entry to another host on 157? For > > me it only > > >> produces the error with 0.168.192.in-addr.arpa and > > >> 2.168.192.in-addr.arpa. Not with 1 or 3. > > >> > > >> Regards > > >> > > >> Christian > > >> > > >> > > >> Am 27.02.20 um 08:42 schrieb L.P.H. van Belle via samba: > > >>> Hai, > > >>> > > >>> Today i thought lets re-test this again. > > >>> So this was done yesterday, > > >>> > > >>> samba-tool dns add dc1.internal.dom.tld > > >> 2.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld > > >>> samba-tool dns add dc1.internal.dom.tld > > >> 0.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld > > >>> samba-tool dns add dc1.internal.dom.tld > > >> 1.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld > > >>> > > >>> I did keep the entries in the dns yesterday. > > >>> > > >>> Today : > > >>> > > >>> samba-tool dns add dc1.internal.dom.tld > > >> 2.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld > > >>> Password for [Administrator at REALM]: > > >>> ERROR(runtime): uncaught exception - (9711, > > >> 'WERR_DNS_ERROR_RECORD_ALREADY_EXISTS') > > >>> File > > >> "/usr/lib/python3/dist-packages/samba/netcmd/__init__.py", > > >> line 186, in _run > > >>> return self.run(*args, **kwargs) > > >>> File > > >> "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > > 945, in run > > >>> raise e > > >>> File > > >> "/usr/lib/python3/dist-packages/samba/netcmd/dns.py", line > > 941, in run > > >>> 0, server, zone, name, add_rec_buf, None) > > >>> # adding an extra on in "3" > > >>> samba-tool dns add dc1.internal.dom.tld > > >> 3.249.10.in-addr.arpa 157 PTR host.extrazone.dom.tld > > >>> Password for [Administrator at REALM]: > > >>> Record added successfully > > >>> > > >>> And i check all the reverse zones there dns records. > > >>> All checked out ok. > > >>> > > >>> Sorry i can not make if fail here. > > >>> > > >>> > > >>> Greetz, > > >>> > > >>> Louis > > >>> > > >>> > > >>>> -----Oorspronkelijk bericht----- > > >>>> Van: samba [mailto:samba-bounces at lists.samba.org] Namens > > >>>> Christian Naumer via samba > > >>>> Verzonden: woensdag 26 februari 2020 15:54 > > >>>> Aan: samba at lists.samba.org > > >>>> Onderwerp: Re: [Samba] New PTR records not visible > > >>>> > > >>>> Am 26.02.20 um 15:40 schrieb L.P.H. van Belle via samba: > > >>>>> So strange.. > > >>>>> > > >>>>> I copied your commando's only change the arpa and > > >>>> servername / domainnames > > >>>>> All worked. > > >>>> > > >>>> Have you checked that you have this situation? > > >>>> > > >>>> If this entry "192.168.2.157" exists and if you try to add > > >>>> "192.168.0.157" another entry to point to > > "192.168.2.157" is added. > > >>>> > > >>>> > > >>>>> > > >>>>> So far nobody told how there ad-dc and DNS is setup.. > > >>>>> Which i why i added : > > >>>>>>> Debian 10, my own packages. > > >>>>>>> Samba 4.11.6 + BIND9_DLZ is used . > > >>>>> > > >>>>> Now are you using samba DNS or BIND_DLZ dns ? > > >>>> > > >>>> I am using BIND_DLZ. On Centos 7 with the Sernet Packages. > > >>>> > > >>>> Regards > > >>>> > > >>>> Christian > > >>>> > > >>>> -- > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > >