This list strips attachments, you will need to ensure I'm in the CC to
get me any attachments.
Sorry,
Andrew Bartlett
On Mon, 2020-02-10 at 13:04 +0100, Alexander Harm via samba
wrote:> Thanks for your invaluable help.
>
> I proceeded as advised and installed the patched packages. Still an error
though, debug.txt attached.
>
> Regards, Alexander
>
>
>
>
> On 10. February 2020 at 11:17:02, L.P.H. van Belle via samba (samba at
lists.samba.org) wrote:
>
> Hai Alexander,
>
> I had a quick look, sorry for all the absence but im very buzzy atm with
some office work.
>
> A quick howto for add this in the "debian" way.
> If you run apt-get source against my repo, all sources are there.
>
> So.
> apt-get source samba
>
> cd samba-4.11.6+dfsg/debian/patches
> Add the patch-file here.
>
> editor series
> Add the name of the patch on the bottem.
>
> Now, to make sure your patch is in the package you rename the package in
the changelog.
> cd ..
> editor changelog
> Rename this : samba (2:4.11.6+dfsg-0.1buster1)
> To
> samba (2:4.11.6+dfsg-0.1buster1.1)
>
> That makes sure if im upgradeing or adding patches your in the upgrade path
again of my repo.
> If i add new patches, my packages are named : samba
(2:4.11.6+dfsg-0.1buster2)
>
> 2:4.11.6+dfsg-0 - official debian nameing
> 2:4.11.6+dfsg-0.1 - my addition, and note, 0. is not released by debian
anything as of -1 is.
>
> After above change.
>
> cd ../..
>
> apt-get build-dep samba
> apt-get source samba -b
> Because samba is already extacted, it will pickup the current dir incl the
changes.
> And build the new packages.
>
> Now of manually install them, of setup a local repo and add them there.
>
> Good luck,
>
> If the patch works out, i'll add it to my packages.
>
> Greetz,
>
> Louis
>
>
>
>
> > -----Oorspronkelijk bericht-----
> > Van: samba [mailto:samba-bounces at lists.samba.org] Namens
> > Alexander Harm via samba
> > Verzonden: maandag 10 februari 2020 10:49
> > Aan: samba at lists.samba.org
> > Onderwerp: Re: [Samba] [PATCH] Re: Failing replication
> >
> > Hi there,
> >
> > I would like to continue on this one. I applied the patch but
> > am wondering which package it influences.
> >
> > If it is just the two mentioned than it did not fix the error.
> >
> > Regards, Alexander
> >
> >
> >
> >
> > On 8. February 2020 at 09:46:11, Alexander Harm
> > (alexander.harm at apfel-q.de) wrote:
> >
> > Hi Andrew,
> >
> > I applied your patch to the Debian packages of Louis.
> >
> > Do you happen to know in which package it will end up? Tried
> > samba and samba-dsdb-modules but the error remains the same.
> >
> > Alexander
> >
> >
> >
> >
> > On 8. February 2020 at 01:38:25, Alexander Harm
> > (alexander.harm at apfel-q.de) wrote:
> >
> > Hi Andrew,
> >
> > you can use my name if you want (Alexander Harm). I will try
> > and build with your patch.
> >
> > Alexander
> >
> >
> >
> >
> > On 8. February 2020 at 00:30:02, Andrew Bartlett
> > (abartlet at samba.org) wrote:
> >
> > Thanks. At this stage is looks like a bug in the repl_meta_data
> > module.
> >
> > Try the attached patch.
> >
> > Can I name you in the bug and is there any affiliation (eg employer)
> > you would like named?
> >
> > I've filed a bug and will file a merge request once I have a test
to
> > confirm this.
> >
> > https://bugzilla.samba.org/show_bug.cgi?id=14272
> >
> > Thanks!
> >
> > Andrew Bartlett
> >
> > On Fri, 2020-02-07 at 23:34 +0100, Alexander Harm via samba wrote:
> > > Hi,
> > >
> > > as instructed I upgraded to ?Version 4.11.6-Debian?.
> > >
> > > Attached the new debug file.
> > >
> > > Regards, Alexander
> > >
> > >
> > >
> > >
> > > On 7. February 2020 at 10:01:02, Andrew Bartlett via samba
> > (samba at lists.samba.org) wrote:
> > > I would fix that first, please run Samba 4.11.
> > >
> > > We have done much on replication since then and I'm keen to
rule out
> > > things we have already fixed before digging into this further.
> > >
> > > Thanks!
> > >
> > > Andrew Bartlett
> > >
> > > On Fri, 2020-02-07 at 09:55 +0100, Alexander Harm via samba
wrote:
> > > > Version 4.9.5-Debian
> > > >
> > > >
> > > >
> > > >
> > > > On 7. February 2020 at 09:55:02, Andrew Bartlett via
> > samba (samba at lists.samba.org) wrote:
> > > > Much better. What Samba version is this?
> > > >
> > > > Andrew Bartlett
> > > >
> > > > On Fri, 2020-02-07 at 09:44 +0100, Alexander Harm via samba
wrote:
> > > > > Is this better?
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On 7. February 2020 at 09:42:01, Andrew Bartlett via
> > samba (samba at lists.samba.org) wrote:
> > > > > I mean the final columns, not lines. There are long
> > lines that seem to
> > > > > be cut off mid-word, rather than wrapped.
> > > > >
> > > > > Andrew Bartlett
> > > > >
> > > > > On Fri, 2020-02-07 at 09:14 +0100, Alexander Harm via
> > samba wrote:
> > > > > > I did but these are the last lines. It ends with
> > ?raise e? also in the shell.
> > > > > > I also ran it on the other DCs and they all end
with
> > ?raise e?.
> > > > > > Alexander
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On 7. February 2020 at 09:12:02, Andrew Bartlett
> > (abartlet at samba.org) wrote:
> > > > > > G'Day Alexander,
> > > > > >
> > > > > > It looks like you have copied the logs out of a
> > terminal and lost the
> > > > > > ends of the lines. Those have the critical
(groan...)
> > details of what
> > > > > > went wrong with the apparent 'critical
extension' failure.
> > > > > >
> > > > > > Can you try and get those and I'll look at
them tomorrow.
> > > > > >
> > > > > > Thanks!
> > > > > >
> > > > > > Andrew Bartlett
> > > > > >
> > > > > > On Fri, 2020-02-07 at 08:56 +0100, Alexander Harm
via
> > samba wrote:
> > > > > > > Hi Andrew,
> > > > > > >
> > > > > > > thanks for your reply. Find attached the
output of
> > the command. Looks like it fails on renaming an object to me.
> > > > > > > Regards, Alexander
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On 7. February 2020 at 08:50:02, Andrew
Bartlett
> > via samba (samba at lists.samba.org) wrote:
> > > > > > > On Wed, 2020-02-05 at 23:41 +0100, Alexander
Harm
> > via samba wrote:
> > > > > > > > Hello,
> > > > > > > >
> > > > > > > > we could need some help resolving a
replication
> > issue we experience since one week.
> > > > > > > > Running samba-tool drs replicate
ka-h9-dc02
> > VMDC-AZURE-01 dc=ds,dc=example,dc=com --sync-all -d 9 returns
> > > > > > > Do that again with --local and we should get
a
> > better set of info in
> > > > > > > the logs.
> > > > > > >
> > > > > > > Andrew Bartlett
> > > > > > > --
> > > > > > > Andrew Bartlett http://samba.org/~abartlet/
> > > > > > > Authentication Developer, Samba Team
http://samba.org
> > > > > > > Samba Developer, Catalyst IT
> > http://catalyst.net.nz/services/samba
> > > > > > >
> > > > > > >
> > > > > > --
> > > > > > Andrew Bartlett http://samba.org/~abartlet/
> > > > > > Authentication Developer, Samba Team
http://samba.org
> > > > > > Samba Developer, Catalyst IT
> > http://catalyst.net.nz/services/samba
> > > > > >
> > > > > --
> > > > > Andrew Bartlett http://samba.org/~abartlet/
> > > > > Authentication Developer, Samba Team http://samba.org
> > > > > Samba Developer, Catalyst IT
> > http://catalyst.net.nz/services/samba
> > > > >
> > > > >
> > > > > --
> > > > > To unsubscribe from this list go to the following URL
> > and read the
> > > > > instructions:
https://lists.samba.org/mailman/options/samba
> > > > --
> > > > Andrew Bartlett http://samba.org/~abartlet/
> > > > Authentication Developer, Samba Team http://samba.org
> > > > Samba Developer, Catalyst IT
http://catalyst.net.nz/services/samba
> > > >
> > > >
> > > >
> > > > --
> > > > To unsubscribe from this list go to the following URL and
read the
> > > > instructions: https://lists.samba.org/mailman/options/samba
> > > --
> > > Andrew Bartlett http://samba.org/~abartlet/
> > > Authentication Developer, Samba Team http://samba.org
> > > Samba Developer, Catalyst IT
http://catalyst.net.nz/services/samba
> > >
> > >
> > >
> > > --
> > > To unsubscribe from this list go to the following URL and read
the
> > > instructions: https://lists.samba.org/mailman/options/samba
> > --
> > Andrew Bartlett http://samba.org/~abartlet/
> > Authentication Developer, Samba Team http://samba.org
> > Samba Developer, Catalyst IT http://catalyst.net.nz/services/samba
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: https://lists.samba.org/mailman/options/samba
> >
> >
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
--
Andrew Bartlett http://samba.org/~abartlet/
Authentication Developer, Samba Team http://samba.org
Samba Developer, Catalyst IT http://catalyst.net.nz/services/samba