Reboot A DC, and check again if the dns records are there. If your already in the DNS-tool, dont forget to refresh the window after the server reboot.> I had to install dnsutils package on > Debian for the DNS updates to work properly.Which setup did you follow so we can update the info on this. Wiki other howto's? If you have a link of it, that would be nice. Greetz, Louis> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Alexander Harm via samba > Verzonden: maandag 26 augustus 2019 11:37 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] Failing to join existing AD as DC > > OK, DNS is solved, I had to install dnsutils package on > Debian for the DNS updates to work properly. > > > But the non-existence of the Samba DCs in?AD Users and > Computers persists. > > On 26. August 2019 at 11:27:04, Alexander Harm > (contact at aharm.de) wrote: > > OK, did everything as suggested, re-installed and joined the > Samba instances to AD. Worked flawlessly so far. > > However, there are two things I noticed which bother me a > bit. On the Windows DC: > > DNS Manager: the two Samba DCs are not listed as nameservers > for the domain > > AD Users and Computers: the two Samba DCs do neither appear > in Domain Controllers nor under Computers > > They both appear in AD Sites & Services correctly and as > mentioned above, everything seems to work just fine. > > Question: should I simply add them manually as nameservers > (makes sense to me) and as domain controllers (probably makes > no difference)? > > > > > On 16. August 2019 at 16:14:02, Rowland penny via samba > (samba at lists.samba.org) wrote: > > On 16/08/2019 15:02, L.P.H. van Belle via samba wrote: > > Naa.. Not needed to reinstall. > > > > His setup is better then most i see here. > > He could do. > > > > apt-get remove --autoremove --purge samba winbind > > > > And reinstall samba, that should be sufficient. > > But stopping samba-ad-dc and removing the files for the > /var/{lib,cache}/samba is suffient. > > > > I do that on every test server. > > I was just making sure ;-) > > I am going now to the Samba 'join' wiki page to ensure it says 'do not > provision before attempting a join' ;-) > > Rowland > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > >
Hello Louis, I followed your wiki. I got a lot of DNS errors after the installation because samba couldn't find nsupdate. Should probably be mentioned on this site? https://wiki.samba.org/index.php/Distribution-specific_Package_Installation For Debian it is: dnsutils For Fedora/CentOS/RedHat:?bind-utils Alexander On 26. August 2019 at 11:41:52, L.P.H. van Belle via samba (samba at lists.samba.org) wrote: Reboot A DC, and check again if the dns records are there. If your already in the DNS-tool, dont forget to refresh the window after the server reboot.> I had to install dnsutils package on > Debian for the DNS updates to work properly.Which setup did you follow so we can update the info on this. Wiki other howto's? If you have a link of it, that would be nice. Greetz, Louis> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Alexander Harm via samba > Verzonden: maandag 26 augustus 2019 11:37 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] Failing to join existing AD as DC > > OK, DNS is solved, I had to install dnsutils package on > Debian for the DNS updates to work properly. > > > But the non-existence of the Samba DCs in?AD Users and > Computers persists. > > On 26. August 2019 at 11:27:04, Alexander Harm > (contact at aharm.de) wrote: > > OK, did everything as suggested, re-installed and joined the > Samba instances to AD. Worked flawlessly so far. > > However, there are two things I noticed which bother me a > bit. On the Windows DC: > > DNS Manager: the two Samba DCs are not listed as nameservers > for the domain > > AD Users and Computers: the two Samba DCs do neither appear > in Domain Controllers nor under Computers > > They both appear in AD Sites & Services correctly and as > mentioned above, everything seems to work just fine. > > Question: should I simply add them manually as nameservers > (makes sense to me) and as domain controllers (probably makes > no difference)? > > > > > On 16. August 2019 at 16:14:02, Rowland penny via samba > (samba at lists.samba.org) wrote: > > On 16/08/2019 15:02, L.P.H. van Belle via samba wrote: > > Naa.. Not needed to reinstall. > > > > His setup is better then most i see here. > > He could do. > > > > apt-get remove --autoremove --purge samba winbind > > > > And reinstall samba, that should be sufficient. > > But stopping samba-ad-dc and removing the files for the > /var/{lib,cache}/samba is suffient. > > > > I do that on every test server. > > I was just making sure ;-) > > I am going now to the Samba 'join' wiki page to ensure it says 'do not > provision before attempting a join' ;-) > > Rowland > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > >-- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Thank you, if updated the wiki. Greetz, Louis> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Alexander Harm via samba > Verzonden: maandag 26 augustus 2019 11:52 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] Failing to join existing AD as DC > > Hello Louis, > > I followed your wiki. I got a lot of DNS errors after the > installation because samba couldn't find nsupdate. > > Should probably be mentioned on this site? > > https://wiki.samba.org/index.php/Distribution-specific_Package > _Installation > > For Debian it is: dnsutils > > For Fedora/CentOS/RedHat:?bind-utils > > Alexander > > > > > On 26. August 2019 at 11:41:52, L.P.H. van Belle via samba > (samba at lists.samba.org) wrote: > > Reboot A DC, and check again if the dns records are there. > If your already in the DNS-tool, dont forget to refresh the > window after the server reboot. > > > I had to install dnsutils package on > > Debian for the DNS updates to work properly. > Which setup did you follow so we can update the info on this. > Wiki other howto's? > If you have a link of it, that would be nice. > > > Greetz, > > Louis > > > > -----Oorspronkelijk bericht----- > > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > > Alexander Harm via samba > > Verzonden: maandag 26 augustus 2019 11:37 > > Aan: samba at lists.samba.org > > Onderwerp: Re: [Samba] Failing to join existing AD as DC > > > > OK, DNS is solved, I had to install dnsutils package on > > Debian for the DNS updates to work properly. > > > > > > But the non-existence of the Samba DCs in?AD Users and > > Computers persists. > > > > On 26. August 2019 at 11:27:04, Alexander Harm > > (contact at aharm.de) wrote: > > > > OK, did everything as suggested, re-installed and joined the > > Samba instances to AD. Worked flawlessly so far. > > > > However, there are two things I noticed which bother me a > > bit. On the Windows DC: > > > > DNS Manager: the two Samba DCs are not listed as nameservers > > for the domain > > > > AD Users and Computers: the two Samba DCs do neither appear > > in Domain Controllers nor under Computers > > > > They both appear in AD Sites & Services correctly and as > > mentioned above, everything seems to work just fine. > > > > Question: should I simply add them manually as nameservers > > (makes sense to me) and as domain controllers (probably makes > > no difference)? > > > > > > > > > > On 16. August 2019 at 16:14:02, Rowland penny via samba > > (samba at lists.samba.org) wrote: > > > > On 16/08/2019 15:02, L.P.H. van Belle via samba wrote: > > > Naa.. Not needed to reinstall. > > > > > > His setup is better then most i see here. > > > He could do. > > > > > > apt-get remove --autoremove --purge samba winbind > > > > > > And reinstall samba, that should be sufficient. > > > But stopping samba-ad-dc and removing the files for the > > /var/{lib,cache}/samba is suffient. > > > > > > I do that on every test server. > > > > I was just making sure ;-) > > > > I am going now to the Samba 'join' wiki page to ensure it > says 'do not > > provision before attempting a join' ;-) > > > > Rowland > > > > > > > > -- > > To unsubscribe from this list go to the following URL and read the > > instructions: https://lists.samba.org/mailman/options/samba > > -- > > To unsubscribe from this list go to the following URL and read the > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > >
On 26/08/2019 10:51, Alexander Harm via samba wrote:> Hello Louis, > > I followed your wiki. I got a lot of DNS errors after the installation because samba couldn't find nsupdate. > > Should probably be mentioned on this site? > > https://wiki.samba.org/index.php/Distribution-specific_Package_Installation > > For Debian it is: dnsutils > > For Fedora/CentOS/RedHat:?bind-utilsIt did mention 'dnsutils', but only if you used BIND_DLZ and you need it for both dns servers, so I have updated the wikipage. Thanks for pointing this error out ;-) Rowland