samba - Aug 2019 - Windows cannot access \\server check the spelling of the name 0x800704cf

Hai Rich, 

Your output of ipconfig /all

Where are these? 
Primary Dns Suffix  . . . . . . . :
DNS Suffix Search List. . . . . . :

This one is below in the output.  
Connection-specific DNS Suffix  . : 

Verify above again, if these 3 are all there and set to webb.local
Then try this : in you network settings, disable ipv6 
Beside ipv6 and the 2 missing outputs, i see the same here on my pc. 

DNS server 192.168.5.160 is one of your DC's ? 
And if you have more DC's, add the other also in the dhcp config. 

And Is dhcp option 015 DNS Domain Name set? 

Greetz, 

Louis

 
> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Rich 
> Webb via samba
> Verzonden: dinsdag 13 augustus 2019 15:49
> Aan: samba
> Onderwerp: Re: [Samba] Windows cannot access \\server check 
> the spelling of the name 0x800704cf
> 
> @Rowland - all the hosts / hostname changes made no 
> difference - made all changes and rebooted. 
> 
> @Louis - The version is 1809.17763.253 and I believe this to 
> be a windows 10 problem as well because this is not happening 
> on Windows 7 machines on the network.  
> 
> I checked and the dns suffix is webb.local - see below:
> 
> Ethernet adapter Ethernet:
> 
>    Connection-specific DNS Suffix  . : webb.local
>    Description . . . . . . . . . . . : Realtek PCIe GBE 
> Family Controller
>    DHCP Enabled. . . . . . . . . . . : Yes
>    Autoconfiguration Enabled . . . . : Yes
>    Link-local IPv6 Address . . . . . : 
> fe80::f9a2:1eec:771c:ab92%9(Preferred)
>    IPv4 Address. . . . . . . . . . . : 192.168.5.100(Preferred)
>    Subnet Mask . . . . . . . . . . . : 255.255.255.0
>    Lease Obtained. . . . . . . . . . : Tuesday, August 13, 
> 2019 7:20:02 AM
>    Lease Expires . . . . . . . . . . : Friday, August 16, 
> 2019 9:43:43 AM
>    Default Gateway . . . . . . . . . : 192.168.5.254
>    DHCP Server . . . . . . . . . . . : 192.168.5.254
>    DHCPv6 IAID . . . . . . . . . . . : 158651445
>    DNS Servers . . . . . . . . . . . : 192.168.5.160
>    NetBIOS over Tcpip. . . . . . . . : Enabled
> 
> Notice the last line - I don't think NetBIOS is a good thing 
> anymore right?  I disabled it and right now I can access 
> \\fs1 .  I'll have to see if it stays working although it is 
> also enabled on the Windows 7 machine that is working.
> 
> Thanks, 
> Rich
> 
> ----- On Aug 12, 2019, at 1:53 PM, samba samba at lists.samba.org wrote:
> 
> > Thanks Louis for the reply.
> > 
> > I will have to check the version when I get home but I 
> *believe* it's 1809.  I
> > have several windows 10 partitions with a multi-boot 
> manager on my various
> > drives that I use for different things and they all seem to 
> exhibit this
> > behavior.  I haven't tried this in Windows 7 which I also have.
> > 
> > I have a firewall on my internet connection so I have the 
> Windows Firewall
> > disabled on all my internal computers.  It just causes 
> issues and usually when
> > I need to remotely access something across a vpn when I'm 
> 1000s of miles away
> > from my network.
> > 
> > Client for MS networks is there and I will have to check 
> again but the dns
> > suffix I checked before and it was set correctly (to webb.local)
> > 
> > I'm guessing it's not the IP stack but I could be wrong. I 
> only say that because
> > it's happening on all my Windows 10 partitions.  Now if the 
> source IP stack is
> > gone (the one I cloned the partitions from) then that would 
> make sense and is
> > possible.
> > 
> > Thanks,
> > Rich
> > ----- On Aug 12, 2019, at 10:20 AM, samba 
> samba at lists.samba.org wrote:
> > 
> >> Windows 10? Then this is normal behaivor.
> >> 
> >> 
> >>> -----Oorspronkelijk bericht-----
> >>> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
> >>> Rowland penny via samba
> >>> Verzonden: maandag 12 augustus 2019 15:50
> >>> Aan: sambalist
> >>> Onderwerp: Re: [Samba] Windows cannot access \\server check
> >>> the spelling of the name 0x800704cf
> >>> 
> >>> On 12/08/2019 14:18, Rich Webb wrote:
> >>> > I would agree except now it smells more like a DNS issue
> >>> since when I try:  \\fs1 I get the error but if I do
> >>> \\fs1.webb.local then it works every time.
> >>> >
> >>> > I've checked my dns suffix settings and search
domains and
> >>> all is correct.  Could there be an issue with the Samba 4
> >>> internal DNS server?
> >> 
> >> Rowland forgot to ask.
> >> 
> >> The windows version??
> >> Because, Error code 0x800704cf: The network location 
> cannot be reached.  Is a
> >> windows error.
> >> 
> >> If you can access \\server.FQDN and not \\server
> >> 
> >> Start here: check if you firewall on the windows PC is set 
> to "Work network"
> >> 
> >> Then what is set ? ( cmd : ipconfig /all )
> >> ??
> >> Primary Dns Suffix  . . . . . . . : ( should be the same 
> as on a linux server :
> >> hostname -d )
> >> DNS Suffix Search List. . . . . . : ( should be the same 
> as on a linux server :
> >> hostname -d )
> >> 
> >> If that is the case. ( same as hostname -d on linux )
> >> Then i suggest, you verify if you server also has its PTR 
> record configured.
> >> 
> >> A few other options to check or what might be a problem here.
> >> The IpStack is kaput. Run: : netsh int ip reset
> >> 
> >> Or
> >> Enable "Client for microsoft networks"
> >> - From the Network and Sharing Center click Change Adapter
Settings
> >> - Right Click on Adapter >> Select Properties
> >> - Check if "Client For Microsoft Networks" is installed?
If not;
> >> - Click Install
> >> - Double-Click Clients
> >> - Choose Client for Microsoft Networks
> >> - Click Ok >> OK
> >> - Restart the computer
> >> 
> >> 
> >> 
> >> Greetz,
> >> 
> >> Louis
> >> 
> >> 
> >> 
> >> 
> >> 
> >> 
> >> --
> >> To unsubscribe from this list go to the following URL and read the
> >> instructions:  https://lists.samba.org/mailman/options/samba
> > 
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
> 
>

Hai, 

Please keep mailing to the list, that migh help others later on also. 

Now, you pc config looks ok. 
> With NetBIOS disabled I continue to be able to access the 
> server with \\fs1 so is this likely a netbios bug maybe with 10? 
Able or not able? 
And not its not a bug, its a feature, SMB1 is getting killed, this is an
inheritance of it.
The other things in you configs look all good now and your servers have an PTR
record in the dns?
Then other question, are you still running samba 4.9.2? 
If so upgrade to latest 4.9 first or ( wait for 4.10.7 ) 

Last i can think off, since you config looks ok. 

And yes, this has all todo with the removing of SMB1. 
MS advice is also to use FQDN in share names. 

It looks a bit like it. 
https://support.microsoft.com/en-us/help/3181029/smb-file-server-share-access-is-unsuccessful-through-dns-cname-alias



Greetz, 

Louis

> -----Oorspronkelijk bericht-----
> Van: Rich Webb [mailto:rwebb at zylatech.com] 
> Verzonden: dinsdag 13 augustus 2019 16:24
> Aan: L.P.H. van Belle
> Onderwerp: Re: [Samba] Windows cannot access \\server check 
> the spelling of the name 0x800704cf
> 
> That info was in the section above:
> 
> Windows IP Configuration
> 
>    Host Name . . . . . . . . . . . . : webb-admin
>    Primary Dns Suffix  . . . . . . . : webb.local
>    Node Type . . . . . . . . . . . . : Hybrid
>    IP Routing Enabled. . . . . . . . : No
>    WINS Proxy Enabled. . . . . . . . : No
>    DNS Suffix Search List. . . . . . : webb.local
> 
> 
> And the connection specific dns suffix is here under the adapter:
> 
> Ethernet adapter Ethernet:
> 
>    Connection-specific DNS Suffix  . : webb.local
>    Description . . . . . . . . . . . : Realtek PCIe GBE 
> Family Controller
> 
> 
> Only 1 DC and that is 192.168.5.160.  Yes, DNS Domain is set 
> to webb.local in the dhcp server. 
> 
> With NetBIOS disabled I continue to be able to access the 
> server with \\fs1 so is this likely a netbios bug maybe with 10? 
> 
> Thanks, 
> Rich
> 
> ----- On Aug 13, 2019, at 10:16 AM, samba samba at lists.samba.org wrote:
> 
> > Hai Rich,
> > 
> > Your output of ipconfig /all
> > 
> > Where are these?
> > Primary Dns Suffix  . . . . . . . :
> > DNS Suffix Search List. . . . . . :
> > 
> > This one is below in the output.
> > Connection-specific DNS Suffix  . :
> > 
> > Verify above again, if these 3 are all there and set to webb.local
> > Then try this : in you network settings, disable ipv6
> > Beside ipv6 and the 2 missing outputs, i see the same here on my pc.
> > 
> > DNS server 192.168.5.160 is one of your DC's ?
> > And if you have more DC's, add the other also in the dhcp config.
> > 
> > And Is dhcp option 015 DNS Domain Name set?
> > 
> > Greetz,
> > 
> > Louis
> > 
> > 
> > 
> >> -----Oorspronkelijk bericht-----
> >> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Rich
> >> Webb via samba
> >> Verzonden: dinsdag 13 augustus 2019 15:49
> >> Aan: samba
> >> Onderwerp: Re: [Samba] Windows cannot access \\server check
> >> the spelling of the name 0x800704cf
> >> 
> >> @Rowland - all the hosts / hostname changes made no
> >> difference - made all changes and rebooted.
> >> 
> >> @Louis - The version is 1809.17763.253 and I believe this to
> >> be a windows 10 problem as well because this is not happening
> >> on Windows 7 machines on the network.
> >> 
> >> I checked and the dns suffix is webb.local - see below:
> >> 
> >> Ethernet adapter Ethernet:
> >> 
> >>    Connection-specific DNS Suffix  . : webb.local
> >>    Description . . . . . . . . . . . : Realtek PCIe GBE
> >> Family Controller
> >>    DHCP Enabled. . . . . . . . . . . : Yes
> >>    Autoconfiguration Enabled . . . . : Yes
> >>    Link-local IPv6 Address . . . . . :
> >> fe80::f9a2:1eec:771c:ab92%9(Preferred)
> >>    IPv4 Address. . . . . . . . . . . : 192.168.5.100(Preferred)
> >>    Subnet Mask . . . . . . . . . . . : 255.255.255.0
> >>    Lease Obtained. . . . . . . . . . : Tuesday, August 13,
> >> 2019 7:20:02 AM
> >>    Lease Expires . . . . . . . . . . : Friday, August 16,
> >> 2019 9:43:43 AM
> >>    Default Gateway . . . . . . . . . : 192.168.5.254
> >>    DHCP Server . . . . . . . . . . . : 192.168.5.254
> >>    DHCPv6 IAID . . . . . . . . . . . : 158651445
> >>    DNS Servers . . . . . . . . . . . : 192.168.5.160
> >>    NetBIOS over Tcpip. . . . . . . . : Enabled
> >> 
> >> Notice the last line - I don't think NetBIOS is a good thing
> >> anymore right?  I disabled it and right now I can access
> >> \\fs1 .  I'll have to see if it stays working although it is
> >> also enabled on the Windows 7 machine that is working.
> >> 
> >> Thanks,
> >> Rich
> >> 
> >> ----- On Aug 12, 2019, at 1:53 PM, samba 
> samba at lists.samba.org wrote:
> >> 
> >> > Thanks Louis for the reply.
> >> > 
> >> > I will have to check the version when I get home but I
> >> *believe* it's 1809.  I
> >> > have several windows 10 partitions with a multi-boot
> >> manager on my various
> >> > drives that I use for different things and they all seem to
> >> exhibit this
> >> > behavior.  I haven't tried this in Windows 7 which I also
have.
> >> > 
> >> > I have a firewall on my internet connection so I have the
> >> Windows Firewall
> >> > disabled on all my internal computers.  It just causes
> >> issues and usually when
> >> > I need to remotely access something across a vpn when I'm
> >> 1000s of miles away
> >> > from my network.
> >> > 
> >> > Client for MS networks is there and I will have to check
> >> again but the dns
> >> > suffix I checked before and it was set correctly (to
webb.local)
> >> > 
> >> > I'm guessing it's not the IP stack but I could be
wrong. I
> >> only say that because
> >> > it's happening on all my Windows 10 partitions.  Now if
the
> >> source IP stack is
> >> > gone (the one I cloned the partitions from) then that would
> >> make sense and is
> >> > possible.
> >> > 
> >> > Thanks,
> >> > Rich
> >> > ----- On Aug 12, 2019, at 10:20 AM, samba
> >> samba at lists.samba.org wrote:
> >> > 
> >> >> Windows 10? Then this is normal behaivor.
> >> >> 
> >> >> 
> >> >>> -----Oorspronkelijk bericht-----
> >> >>> Van: samba [mailto:samba-bounces at lists.samba.org]
Namens
> >> >>> Rowland penny via samba
> >> >>> Verzonden: maandag 12 augustus 2019 15:50
> >> >>> Aan: sambalist
> >> >>> Onderwerp: Re: [Samba] Windows cannot access \\server
check
> >> >>> the spelling of the name 0x800704cf
> >> >>> 
> >> >>> On 12/08/2019 14:18, Rich Webb wrote:
> >> >>> > I would agree except now it smells more like a
DNS issue
> >> >>> since when I try:  \\fs1 I get the error but if I do
> >> >>> \\fs1.webb.local then it works every time.
> >> >>> >
> >> >>> > I've checked my dns suffix settings and
search domains and
> >> >>> all is correct.  Could there be an issue with the
Samba 4
> >> >>> internal DNS server?
> >> >> 
> >> >> Rowland forgot to ask.
> >> >> 
> >> >> The windows version??
> >> >> Because, Error code 0x800704cf: The network location
> >> cannot be reached.  Is a
> >> >> windows error.
> >> >> 
> >> >> If you can access \\server.FQDN and not \\server
> >> >> 
> >> >> Start here: check if you firewall on the windows PC is
set
> >> to "Work network"
> >> >> 
> >> >> Then what is set ? ( cmd : ipconfig /all )
> >> >> ??
> >> >> Primary Dns Suffix  . . . . . . . : ( should be the same
> >> as on a linux server :
> >> >> hostname -d )
> >> >> DNS Suffix Search List. . . . . . : ( should be the same
> >> as on a linux server :
> >> >> hostname -d )
> >> >> 
> >> >> If that is the case. ( same as hostname -d on linux )
> >> >> Then i suggest, you verify if you server also has its PTR
> >> record configured.
> >> >> 
> >> >> A few other options to check or what might be a problem
here.
> >> >> The IpStack is kaput. Run: : netsh int ip reset
> >> >> 
> >> >> Or
> >> >> Enable "Client for microsoft networks"
> >> >> - From the Network and Sharing Center click Change 
> Adapter Settings
> >> >> - Right Click on Adapter >> Select Properties
> >> >> - Check if "Client For Microsoft Networks" is
installed? If not;
> >> >> - Click Install
> >> >> - Double-Click Clients
> >> >> - Choose Client for Microsoft Networks
> >> >> - Click Ok >> OK
> >> >> - Restart the computer
> >> >> 
> >> >> 
> >> >> 
> >> >> Greetz,
> >> >> 
> >> >> Louis
> >> >> 
> >> >> 
> >> >> 
> >> >> 
> >> >> 
> >> >> 
> >> >> --
> >> >> To unsubscribe from this list go to the following URL 
> and read the
> >> >> instructions: 
https://lists.samba.org/mailman/options/samba
> >> > 
> >> > --
> >> > To unsubscribe from this list go to the following URL 
> and read the
> >> > instructions:  https://lists.samba.org/mailman/options/samba
> >> 
> >> --
> >> To unsubscribe from this list go to the following URL and read the
> >> instructions:  https://lists.samba.org/mailman/options/samba
> >> 
> >> 
> > 
> > 
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> 
>

Sorry - forgot to change it - for some reason when I just hit reply it goes to
the poster rather than the list.  I have to change it each time and if I forget
it goes direct.

I AM able to access the server by just the hostname now with NetBIOS disabled
(ie \\fs1)

Yes, I'm still on 4.9.2.  I'll probably upgrade soon.  

Thanks for all your help!

Thanks, 
Rich

----- On Aug 13, 2019, at 10:39 AM, samba samba at lists.samba.org wrote:
> Hai,
> 
> Please keep mailing to the list, that migh help others later on also.
> 
> Now, you pc config looks ok.
> 
>> With NetBIOS disabled I continue to be able to access the
>> server with \\fs1 so is this likely a netbios bug maybe with 10?
> 
> Able or not able?
> And not its not a bug, its a feature, SMB1 is getting killed, this is an
> inheritance of it.
> The other things in you configs look all good now and your servers have an
PTR
> record in the dns?
> Then other question, are you still running samba 4.9.2?
> If so upgrade to latest 4.9 first or ( wait for 4.10.7 )
> 
> Last i can think off, since you config looks ok.
> 
> And yes, this has all todo with the removing of SMB1.
> MS advice is also to use FQDN in share names.
> 
> It looks a bit like it.
>
https://support.microsoft.com/en-us/help/3181029/smb-file-server-share-access-is-unsuccessful-through-dns-cname-alias
> 
> 
> 
> Greetz,
> 
> Louis
> 
> 
>> -----Oorspronkelijk bericht-----
>> Van: Rich Webb [mailto:rwebb at zylatech.com]
>> Verzonden: dinsdag 13 augustus 2019 16:24
>> Aan: L.P.H. van Belle
>> Onderwerp: Re: [Samba] Windows cannot access \\server check
>> the spelling of the name 0x800704cf
>> 
>> That info was in the section above:
>> 
>> Windows IP Configuration
>> 
>>    Host Name . . . . . . . . . . . . : webb-admin
>>    Primary Dns Suffix  . . . . . . . : webb.local
>>    Node Type . . . . . . . . . . . . : Hybrid
>>    IP Routing Enabled. . . . . . . . : No
>>    WINS Proxy Enabled. . . . . . . . : No
>>    DNS Suffix Search List. . . . . . : webb.local
>> 
>> 
>> And the connection specific dns suffix is here under the adapter:
>> 
>> Ethernet adapter Ethernet:
>> 
>>    Connection-specific DNS Suffix  . : webb.local
>>    Description . . . . . . . . . . . : Realtek PCIe GBE
>> Family Controller
>> 
>> 
>> Only 1 DC and that is 192.168.5.160.  Yes, DNS Domain is set
>> to webb.local in the dhcp server.
>> 
>> With NetBIOS disabled I continue to be able to access the
>> server with \\fs1 so is this likely a netbios bug maybe with 10?
>> 
>> Thanks,
>> Rich
>> 
>> ----- On Aug 13, 2019, at 10:16 AM, samba samba at lists.samba.org
wrote:
>> 
>> > Hai Rich,
>> > 
>> > Your output of ipconfig /all
>> > 
>> > Where are these?
>> > Primary Dns Suffix  . . . . . . . :
>> > DNS Suffix Search List. . . . . . :
>> > 
>> > This one is below in the output.
>> > Connection-specific DNS Suffix  . :
>> > 
>> > Verify above again, if these 3 are all there and set to webb.local
>> > Then try this : in you network settings, disable ipv6
>> > Beside ipv6 and the 2 missing outputs, i see the same here on my
pc.
>> > 
>> > DNS server 192.168.5.160 is one of your DC's ?
>> > And if you have more DC's, add the other also in the dhcp
config.
>> > 
>> > And Is dhcp option 015 DNS Domain Name set?
>> > 
>> > Greetz,
>> > 
>> > Louis
>> > 
>> > 
>> > 
>> >> -----Oorspronkelijk bericht-----
>> >> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
Rich
>> >> Webb via samba
>> >> Verzonden: dinsdag 13 augustus 2019 15:49
>> >> Aan: samba
>> >> Onderwerp: Re: [Samba] Windows cannot access \\server check
>> >> the spelling of the name 0x800704cf
>> >> 
>> >> @Rowland - all the hosts / hostname changes made no
>> >> difference - made all changes and rebooted.
>> >> 
>> >> @Louis - The version is 1809.17763.253 and I believe this to
>> >> be a windows 10 problem as well because this is not happening
>> >> on Windows 7 machines on the network.
>> >> 
>> >> I checked and the dns suffix is webb.local - see below:
>> >> 
>> >> Ethernet adapter Ethernet:
>> >> 
>> >>    Connection-specific DNS Suffix  . : webb.local
>> >>    Description . . . . . . . . . . . : Realtek PCIe GBE
>> >> Family Controller
>> >>    DHCP Enabled. . . . . . . . . . . : Yes
>> >>    Autoconfiguration Enabled . . . . : Yes
>> >>    Link-local IPv6 Address . . . . . :
>> >> fe80::f9a2:1eec:771c:ab92%9(Preferred)
>> >>    IPv4 Address. . . . . . . . . . . :
192.168.5.100(Preferred)
>> >>    Subnet Mask . . . . . . . . . . . : 255.255.255.0
>> >>    Lease Obtained. . . . . . . . . . : Tuesday, August 13,
>> >> 2019 7:20:02 AM
>> >>    Lease Expires . . . . . . . . . . : Friday, August 16,
>> >> 2019 9:43:43 AM
>> >>    Default Gateway . . . . . . . . . : 192.168.5.254
>> >>    DHCP Server . . . . . . . . . . . : 192.168.5.254
>> >>    DHCPv6 IAID . . . . . . . . . . . : 158651445
>> >>    DNS Servers . . . . . . . . . . . : 192.168.5.160
>> >>    NetBIOS over Tcpip. . . . . . . . : Enabled
>> >> 
>> >> Notice the last line - I don't think NetBIOS is a good
thing
>> >> anymore right?  I disabled it and right now I can access
>> >> \\fs1 .  I'll have to see if it stays working although it
is
>> >> also enabled on the Windows 7 machine that is working.
>> >> 
>> >> Thanks,
>> >> Rich
>> >> 
>> >> ----- On Aug 12, 2019, at 1:53 PM, samba
>> samba at lists.samba.org wrote:
>> >> 
>> >> > Thanks Louis for the reply.
>> >> > 
>> >> > I will have to check the version when I get home but I
>> >> *believe* it's 1809.  I
>> >> > have several windows 10 partitions with a multi-boot
>> >> manager on my various
>> >> > drives that I use for different things and they all seem
to
>> >> exhibit this
>> >> > behavior.  I haven't tried this in Windows 7 which I
also have.
>> >> > 
>> >> > I have a firewall on my internet connection so I have the
>> >> Windows Firewall
>> >> > disabled on all my internal computers.  It just causes
>> >> issues and usually when
>> >> > I need to remotely access something across a vpn when
I'm
>> >> 1000s of miles away
>> >> > from my network.
>> >> > 
>> >> > Client for MS networks is there and I will have to check
>> >> again but the dns
>> >> > suffix I checked before and it was set correctly (to
webb.local)
>> >> > 
>> >> > I'm guessing it's not the IP stack but I could be
wrong. I
>> >> only say that because
>> >> > it's happening on all my Windows 10 partitions.  Now
if the
>> >> source IP stack is
>> >> > gone (the one I cloned the partitions from) then that
would
>> >> make sense and is
>> >> > possible.
>> >> > 
>> >> > Thanks,
>> >> > Rich
>> >> > ----- On Aug 12, 2019, at 10:20 AM, samba
>> >> samba at lists.samba.org wrote:
>> >> > 
>> >> >> Windows 10? Then this is normal behaivor.
>> >> >> 
>> >> >> 
>> >> >>> -----Oorspronkelijk bericht-----
>> >> >>> Van: samba [mailto:samba-bounces at
lists.samba.org] Namens
>> >> >>> Rowland penny via samba
>> >> >>> Verzonden: maandag 12 augustus 2019 15:50
>> >> >>> Aan: sambalist
>> >> >>> Onderwerp: Re: [Samba] Windows cannot access
\\server check
>> >> >>> the spelling of the name 0x800704cf
>> >> >>> 
>> >> >>> On 12/08/2019 14:18, Rich Webb wrote:
>> >> >>> > I would agree except now it smells more like
a DNS issue
>> >> >>> since when I try:  \\fs1 I get the error but if I
do
>> >> >>> \\fs1.webb.local then it works every time.
>> >> >>> >
>> >> >>> > I've checked my dns suffix settings and
search domains and
>> >> >>> all is correct.  Could there be an issue with the
Samba 4
>> >> >>> internal DNS server?
>> >> >> 
>> >> >> Rowland forgot to ask.
>> >> >> 
>> >> >> The windows version??
>> >> >> Because, Error code 0x800704cf: The network location
>> >> cannot be reached.  Is a
>> >> >> windows error.
>> >> >> 
>> >> >> If you can access \\server.FQDN and not \\server
>> >> >> 
>> >> >> Start here: check if you firewall on the windows PC
is set
>> >> to "Work network"
>> >> >> 
>> >> >> Then what is set ? ( cmd : ipconfig /all )
>> >> >> ??
>> >> >> Primary Dns Suffix  . . . . . . . : ( should be the
same
>> >> as on a linux server :
>> >> >> hostname -d )
>> >> >> DNS Suffix Search List. . . . . . : ( should be the
same
>> >> as on a linux server :
>> >> >> hostname -d )
>> >> >> 
>> >> >> If that is the case. ( same as hostname -d on linux )
>> >> >> Then i suggest, you verify if you server also has its
PTR
>> >> record configured.
>> >> >> 
>> >> >> A few other options to check or what might be a
problem here.
>> >> >> The IpStack is kaput. Run: : netsh int ip reset
>> >> >> 
>> >> >> Or
>> >> >> Enable "Client for microsoft networks"
>> >> >> - From the Network and Sharing Center click Change
>> Adapter Settings
>> >> >> - Right Click on Adapter >> Select Properties
>> >> >> - Check if "Client For Microsoft Networks"
is installed? If not;
>> >> >> - Click Install
>> >> >> - Double-Click Clients
>> >> >> - Choose Client for Microsoft Networks
>> >> >> - Click Ok >> OK
>> >> >> - Restart the computer
>> >> >> 
>> >> >> 
>> >> >> 
>> >> >> Greetz,
>> >> >> 
>> >> >> Louis
>> >> >> 
>> >> >> 
>> >> >> 
>> >> >> 
>> >> >> 
>> >> >> 
>> >> >> --
>> >> >> To unsubscribe from this list go to the following URL
>> and read the
>> >> >> instructions: 
https://lists.samba.org/mailman/options/samba
>> >> > 
>> >> > --
>> >> > To unsubscribe from this list go to the following URL
>> and read the
>> >> > instructions: 
https://lists.samba.org/mailman/options/samba
>> >> 
>> >> --
>> >> To unsubscribe from this list go to the following URL and read
the
>> >> instructions:  https://lists.samba.org/mailman/options/samba
>> >> 
>> >> 
>> > 
>> > 
>> > --
>> > To unsubscribe from this list go to the following URL and read the
>> > instructions:  https://lists.samba.org/mailman/options/samba
>> 
>> 
> 
> 
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba