samba - Sep 2018 - Kyocera P6230cdn driver installation on print server fails

First of all, I forgot to mention, that I have Debian 9 with standard
Samba 4.5.

Modifying the oemsetup.inf should not be neccessary as I have set the
os_major/minor to 6/0.

The generic driver which comes with Windows is a Type 4 which should
not be supported by samba as far as I read.

I tried the van-belle driver. Same situation.

I have found samba 4.8 for stretch at http://apt.van-belle.nl.  I think
I will try that one (there is no samba in backports) unless some new
idea pops up.

Thanks
Matthias

On Mon, Sep 17, 2018 at 02:00:03PM +0200, L.P.H. van Belle via samba
wrote:
> As you did see on the download location. 
> 
>
http://downloads.van-belle.nl/samba4/Patches/debian-S12761-s3-printing-Change-to-GUID-dir-if-we-deal-with-COPY.patch
> Is a working fix. I've used that in lots of samba versions. 
> 
> But i dont need the patch anymore, so i removed it from the builds. 
> 
> You can try : 
> https://downloads.van-belle.nl/samba4/Kyocera/ 
> Which is a customized driver made for me by kyocera and signed by MS. 
> 
> The next samba 4.6 ... 
> See : https://wiki.samba.org/index.php/Samba_Release_Planning 
> 4.6 discontinued (EOL) 2018-09-13  
> 
> Upgrade to 4.7 or better 4.8. 
> 
> Please note, if you adjust you driver as shown below, you loose the signing
and you need to lift some restrictions by GPO to allow the printer driver.
> 
> 
> Latest samba version should allow the new MS drivers, but i have not tested
that.
> The universal kyocera works fine for now. 
> 
> Greetz, 
> 
> Louis
> 
> 
> > -----Oorspronkelijk bericht-----
> > Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> > MORILLO Jordi via samba
> > Verzonden: maandag 17 september 2018 13:36
> > Aan: samba at lists.samba.org
> > Onderwerp: Re: [Samba] Kyocera P6230cdn driver installation 
> > on print server fails
> > 
> > As usual, Kyocera drivers are not all formed.
> > You have to edit OEMSETUP.inf in each arch (32 + 64):
> > 
> > Modify this:
> > 
> > [Manufacturer]
> > Kyocera=Kyocera,NTx86.6.0,NTamd64.6.0
> > ;----------------------------------------------------------------
> > ; Model Sections
> > ;----------------------------------------------------------------
> > [Kyocera.NTx86.6.0]
> > .....
> > [Kyocera.NTamd64.6.0]
> > .....
> > 
> > Into this:
> > 
> > [Manufacturer]
> > Kyocera=Kyocera,NTx86,NTamd64
> > ;----------------------------------------------------------------
> > ; Model Sections
> > ;----------------------------------------------------------------
> > [Kyocera.NTx86]
> > .....
> > [Kyocera.NTamd64]
> > .....
> > 
> > Also, there is a bug that never been corrected for uploading 
> > 32bits driver: 
> > https://bugzilla.samba.org/show_bug.cgi?id=12761 but patch exist....
> > 
> > 
> > -----Message d'origine-----
> > De : samba <samba-bounces at lists.samba.org> De la part de 
> > Matthias via samba
> > Envoyé : lundi 17 septembre 2018 12:38
> > À : samba at lists.samba.org
> > Objet : [Samba] Kyocera P6230cdn driver installation on print 
> > server fails
> > 
> > Hello,
> > 
> > I am trying to install the driver on my print server. I used
> > 
> > https://wiki.samba.org/index.php/Setting_up_Automatic_Printer_
> > Driver_Downloads_for_Windows_Clients
> > 
> > as a guide. I tried to install
> > 
> > - KX driver, 32 and/or 64 bit
> > - KX-XPS driver, 32 and/or 64 bit
> > - Of both drivers the 64bit variants the installed driver 
> > package from system32 directory
> > 
> > With all drivers I get the message
> > 
> > "Add Printer Driver Wizard
> > Unable to install Kyocera ECOSYS P6230cdn KX (XPS), Type 3 - 
> > User Mode, x64 driver.
> > This operation is not supported."
> > 
> > after files have been copied to the print$ share into 
> > x64/{...} or W32X86/{...} directories. I can't find anything 
> > enlightening in the samba log files (low log level shows 
> > nothing helpful, high log level shows to much) and eventvwr 
> > (AFAIR Event ID 215 which brings nothing helpful). I have set 
> > os_major/minor to 6/0. I don't believe, that rights are missing.
> > 
> > Any ideas?
> > 
> > Thanks
> > Matthias
> > 
> > 
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> > -- 
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> > 
> > 
> 
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
-- 
greg requiescat in pace. vir magnus erat. desiderio eius angor.

Actually at van-belle it is 4.6.7 (or 4.6.9) for stretch.

On Mon, Sep 17, 2018 at 06:50:38PM +0200, Matthias via samba
wrote:
> First of all, I forgot to mention, that I have Debian 9 with standard
> Samba 4.5.
> 
> Modifying the oemsetup.inf should not be neccessary as I have set the
> os_major/minor to 6/0.
> 
> The generic driver which comes with Windows is a Type 4 which should
> not be supported by samba as far as I read.
> 
> I tried the van-belle driver. Same situation.
> 
> I have found samba 4.8 for stretch at http://apt.van-belle.nl.  I think
> I will try that one (there is no samba in backports) unless some new
> idea pops up.
> 
> Thanks
> Matthias
> 
> On Mon, Sep 17, 2018 at 02:00:03PM +0200, L.P.H. van Belle via samba wrote:
> > As you did see on the download location. 
> > 
> >
http://downloads.van-belle.nl/samba4/Patches/debian-S12761-s3-printing-Change-to-GUID-dir-if-we-deal-with-COPY.patch
> > Is a working fix. I've used that in lots of samba versions. 
> > 
> > But i dont need the patch anymore, so i removed it from the builds. 
> > 
> > You can try : 
> > https://downloads.van-belle.nl/samba4/Kyocera/ 
> > Which is a customized driver made for me by kyocera and signed by MS. 
> > 
> > The next samba 4.6 ... 
> > See : https://wiki.samba.org/index.php/Samba_Release_Planning 
> > 4.6 discontinued (EOL) 2018-09-13  
> > 
> > Upgrade to 4.7 or better 4.8. 
> > 
> > Please note, if you adjust you driver as shown below, you loose the
signing and you need to lift some restrictions by GPO to allow the printer
driver.
> > 
> > 
> > Latest samba version should allow the new MS drivers, but i have not
tested that.
> > The universal kyocera works fine for now. 
> > 
> > Greetz, 
> > 
> > Louis
> > 
> > 
> > > -----Oorspronkelijk bericht-----
> > > Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> > > MORILLO Jordi via samba
> > > Verzonden: maandag 17 september 2018 13:36
> > > Aan: samba at lists.samba.org
> > > Onderwerp: Re: [Samba] Kyocera P6230cdn driver installation 
> > > on print server fails
> > > 
> > > As usual, Kyocera drivers are not all formed.
> > > You have to edit OEMSETUP.inf in each arch (32 + 64):
> > > 
> > > Modify this:
> > > 
> > > [Manufacturer]
> > > Kyocera=Kyocera,NTx86.6.0,NTamd64.6.0
> > > ;----------------------------------------------------------------
> > > ; Model Sections
> > > ;----------------------------------------------------------------
> > > [Kyocera.NTx86.6.0]
> > > .....
> > > [Kyocera.NTamd64.6.0]
> > > .....
> > > 
> > > Into this:
> > > 
> > > [Manufacturer]
> > > Kyocera=Kyocera,NTx86,NTamd64
> > > ;----------------------------------------------------------------
> > > ; Model Sections
> > > ;----------------------------------------------------------------
> > > [Kyocera.NTx86]
> > > .....
> > > [Kyocera.NTamd64]
> > > .....
> > > 
> > > Also, there is a bug that never been corrected for uploading 
> > > 32bits driver: 
> > > https://bugzilla.samba.org/show_bug.cgi?id=12761 but patch
exist....
> > > 
> > > 
> > > -----Message d'origine-----
> > > De : samba <samba-bounces at lists.samba.org> De la part de
> > > Matthias via samba
> > > Envoyé : lundi 17 septembre 2018 12:38
> > > À : samba at lists.samba.org
> > > Objet : [Samba] Kyocera P6230cdn driver installation on print 
> > > server fails
> > > 
> > > Hello,
> > > 
> > > I am trying to install the driver on my print server. I used
> > > 
> > > https://wiki.samba.org/index.php/Setting_up_Automatic_Printer_
> > > Driver_Downloads_for_Windows_Clients
> > > 
> > > as a guide. I tried to install
> > > 
> > > - KX driver, 32 and/or 64 bit
> > > - KX-XPS driver, 32 and/or 64 bit
> > > - Of both drivers the 64bit variants the installed driver 
> > > package from system32 directory
> > > 
> > > With all drivers I get the message
> > > 
> > > "Add Printer Driver Wizard
> > > Unable to install Kyocera ECOSYS P6230cdn KX (XPS), Type 3 - 
> > > User Mode, x64 driver.
> > > This operation is not supported."
> > > 
> > > after files have been copied to the print$ share into 
> > > x64/{...} or W32X86/{...} directories. I can't find anything 
> > > enlightening in the samba log files (low log level shows 
> > > nothing helpful, high log level shows to much) and eventvwr 
> > > (AFAIR Event ID 215 which brings nothing helpful). I have set 
> > > os_major/minor to 6/0. I don't believe, that rights are
missing.
> > > 
> > > Any ideas?
> > > 
> > > Thanks
> > > Matthias
> > > 
> > > 
> > > --
> > > To unsubscribe from this list go to the following URL and read
the
> > > instructions:  https://lists.samba.org/mailman/options/samba
> > > -- 
> > > To unsubscribe from this list go to the following URL and read
the
> > > instructions:  https://lists.samba.org/mailman/options/samba
> > > 
> > > 
> > 
> > 
> > -- 
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> 
> -- 
> greg requiescat in pace. vir magnus erat. desiderio eius angor.
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
-- 
greg requiescat in pace. vir magnus erat. desiderio eius angor.

On Mon, 17 Sep 2018 19:27:06 +0200
Matthias via samba <samba at lists.samba.org> wrote:
> Actually at van-belle it is 4.6.7 (or 4.6.9) for stretch.
> 
You were correct first time, the latest stretch version available
from Louis is 4.8.5

Rowland