Hi Louis, thank you for your answer. - the link was already there - I followed this hints: https://lists.samba.org/archive/samba/2016-November/204773.html did the chmod 2775 administrator is part of the PrintOperatorGroup net rpc rights list privileges SePrintOperatorPrivilege -U "H955\administrator" getfacl printerdrivers # file: printerdrivers # owner: root # group: H955\134domain\040admins # flags: -s- user::rwx user:root:rwx user:3000003:r-x user:H955\134domain\040admins:rwx group::rwx group:3000003:r-x group:H955\134domain\040admins:rwx mask::rwx other::--- default:user::rwx default:user:root:rwx default:user:3000003:r-x default:user:H955\134domain\040admins:rwx default:group::--- default:group:3000003:r-x default:group:H955\134domain\040admins:rwx default:mask::rwx default:other::--- Now I found this post: https://groups.google.com/forum/#!msg/linux.samba/9BptH0lYLSk/D7pBaYnoDgAJ Herr I tried the printui /s /t2 - had an ver4. Now I found an relative old driver for the Kyocera FS-C5150 (windows 7 x64, ver3), and installed it successfully local. But nontheless putting that on the share on samba failes again?! Also - some of the ancient driver (HP4050, HP4250) which are the easyest one (did that manually on Samba 3.x years ago) also fail on putting the driver remote for download. I'm trying this from a W8.1 WS Thanks! Franz>>> L.P.H. van Belle <belle at bazuin.nl> 04.06.2017 00:38 >>>> Op 1 jun. 2017 om 15:20 heeft Franz Gansberger via samba <samba at lists.samba.org> het volgende geschreven: > > Hi all, > > according to this thread, I ran into the same situation: > > [2017/06/01 10:35:46.909754, 0] ../source3/rpc_server/spoolss/srv_spoolss_nt.c:8476(_spoolss_AddPrinterDriverEx) > _spoolss_AddPrinterDriverEx: level 8 not yet implemented > [2017/06/01 10:35:46.925055, 0] ../source3/printing/nt_printing.c:1097(move_driver_file_to_download_area) > move_driver_file_to_download_area: Unable to rename [x64/kmfc5150_xps] to [x64/3/KMFC5150_XPS]: NT_STATUS_OBJECT_NAME_NOT_FOUND > > > [print$] > path = /data/data/printerdrivers/ > read only = no > acl_xattr:ignore system acl = yes > browseable = yes > guest ok = no > write list = root, administrator, @"Domain Admins", @lpadmin, @"Print Operators" > > > Samba version 4.5.8-Debian > > I followed all the hints from Rowland, but... > > Has there been any solution so far? > Appreciate any thoughts.. > :-) > > Franz > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba>if it a kyocera driver, you need to cleanup all 32bit parts from the inf. and you can try ln -s x64 X64 in the driver folder last xps driver? cant test this atm but try the pcl or ps version. there is a post of me which tells verything you need to know for a printer (cups) set on debian. (google for it, use l.p.h in your search) last, you only need the first three line if you use acl_xattr:ignore system acl = yes and configure the share from a windows client. dont mix posix acl settings and acl_xattr:ignore system acl = yes still no go after above, i can test next wednesday and give better help. ps? that driver is it a 'level 3 Windows driver' since level 4 and up are not supported yet. ( the error msg shows level 8, but that not the windows level) greetz Louis
I can install Kyocera Universal KPDL drivers once i delete the sections:
[PrinterPackageInstallation.x86]
PackageAware=TRUE
CoreDriverDependencies={D20EA372-DD35-4950-9ED8-A6335AFE79F1}
[PrinterPackageInstallation.amd64]
PackageAware=TRUE
CoreDriverDependencies={D20EA372-DD35-4950-9ED8-A6335AFE79F1}
in the OEMSETUP.inf file.
But editing the file invalidates signing.
Am 06.06.2017 um 12:59 schrieb Franz Gansberger via
samba:> Hi Louis,
>
> thank you for your answer.
>
> - the link was already there
> - I followed this hints:
> https://lists.samba.org/archive/samba/2016-November/204773.html
> did the chmod 2775
> administrator is part of the PrintOperatorGroup
> net rpc rights list privileges SePrintOperatorPrivilege -U
"H955\administrator"
>
> getfacl printerdrivers
> # file: printerdrivers
> # owner: root
> # group: H955\134domain\040admins
> # flags: -s-
> user::rwx
> user:root:rwx
> user:3000003:r-x
> user:H955\134domain\040admins:rwx
> group::rwx
> group:3000003:r-x
> group:H955\134domain\040admins:rwx
> mask::rwx
> other::---
> default:user::rwx
> default:user:root:rwx
> default:user:3000003:r-x
> default:user:H955\134domain\040admins:rwx
> default:group::---
> default:group:3000003:r-x
> default:group:H955\134domain\040admins:rwx
> default:mask::rwx
> default:other::---
>
> Now I found this post:
> https://groups.google.com/forum/#!msg/linux.samba/9BptH0lYLSk/D7pBaYnoDgAJ
>
> Herr I tried the printui /s /t2 - had an ver4.
> Now I found an relative old driver for the Kyocera FS-C5150 (windows 7 x64,
ver3), and installed it successfully local.
> But nontheless putting that on the share on samba failes again?!
>
> Also - some of the ancient driver (HP4050, HP4250) which are the easyest
one (did that manually on Samba 3.x years ago) also fail on putting the driver
remote for download.
>
> I'm trying this from a W8.1 WS
>
> Thanks!
> Franz
>
>
>>>> L.P.H. van Belle <belle at bazuin.nl> 04.06.2017 00:38
>>>
>
>> Op 1 jun. 2017 om 15:20 heeft Franz Gansberger via samba <samba at
lists.samba.org> het volgende geschreven:
>>
>> Hi all,
>>
>> according to this thread, I ran into the same situation:
>>
>> [2017/06/01 10:35:46.909754, 0]
../source3/rpc_server/spoolss/srv_spoolss_nt.c:8476(_spoolss_AddPrinterDriverEx)
>> _spoolss_AddPrinterDriverEx: level 8 not yet implemented
>> [2017/06/01 10:35:46.925055, 0]
../source3/printing/nt_printing.c:1097(move_driver_file_to_download_area)
>> move_driver_file_to_download_area: Unable to rename
[x64/kmfc5150_xps] to [x64/3/KMFC5150_XPS]: NT_STATUS_OBJECT_NAME_NOT_FOUND
>>
>>
>> [print$]
>> path = /data/data/printerdrivers/
>> read only = no
>> acl_xattr:ignore system acl = yes
>> browseable = yes
>> guest ok = no
>> write list = root, administrator, @"Domain Admins",
@lpadmin, @"Print Operators"
>>
>>
>> Samba version 4.5.8-Debian
>>
>> I followed all the hints from Rowland, but...
>>
>> Has there been any solution so far?
>> Appreciate any thoughts..
>> :-)
>>
>> Franz
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions: https://lists.samba.org/mailman/options/samba
> if it a kyocera driver, you need to cleanup all 32bit parts from the inf.
>
> and you can try
> ln -s x64 X64 in the driver folder
>
> last xps driver? cant test this atm but try the pcl or ps version.
>
> there is a post of me which tells verything you need to know for a printer
(cups) set on debian. (google for it, use l.p.h in your search)
>
> last, you only need the first three line if you use acl_xattr:ignore system
acl = yes
> and configure the share from a windows client.
>
> dont mix posix acl settings and acl_xattr:ignore system acl = yes
>
> still no go after above, i can test next wednesday and give better help.
>
> ps? that driver is it a 'level 3 Windows driver' since level 4 and
up are not supported yet. ( the error msg shows level 8, but that not the
windows level)
>
> greetz
>
> Louis
>
>
Please ignore the recommendation, such an driver can not be assigned to an printer. Am 06.06.2017 um 14:54 schrieb Achim Gottinger via samba:> I can install Kyocera Universal KPDL drivers once i delete the sections: > > [PrinterPackageInstallation.x86] > PackageAware=TRUE > CoreDriverDependencies={D20EA372-DD35-4950-9ED8-A6335AFE79F1} > > [PrinterPackageInstallation.amd64] > PackageAware=TRUE > CoreDriverDependencies={D20EA372-DD35-4950-9ED8-A6335AFE79F1} > > in the OEMSETUP.inf file. > > But editing the file invalidates signing. > > Am 06.06.2017 um 12:59 schrieb Franz Gansberger via samba: >> Hi Louis, >> >> thank you for your answer. >> >> - the link was already there >> - I followed this hints: >> https://lists.samba.org/archive/samba/2016-November/204773.html >> did the chmod 2775 >> administrator is part of the PrintOperatorGroup >> net rpc rights list privileges SePrintOperatorPrivilege -U >> "H955\administrator" >> >> getfacl printerdrivers >> # file: printerdrivers >> # owner: root >> # group: H955\134domain\040admins >> # flags: -s- >> user::rwx >> user:root:rwx >> user:3000003:r-x >> user:H955\134domain\040admins:rwx >> group::rwx >> group:3000003:r-x >> group:H955\134domain\040admins:rwx >> mask::rwx >> other::--- >> default:user::rwx >> default:user:root:rwx >> default:user:3000003:r-x >> default:user:H955\134domain\040admins:rwx >> default:group::--- >> default:group:3000003:r-x >> default:group:H955\134domain\040admins:rwx >> default:mask::rwx >> default:other::--- >> >> Now I found this post: >> https://groups.google.com/forum/#!msg/linux.samba/9BptH0lYLSk/D7pBaYnoDgAJ >> >> >> Herr I tried the printui /s /t2 - had an ver4. >> Now I found an relative old driver for the Kyocera FS-C5150 (windows >> 7 x64, ver3), and installed it successfully local. >> But nontheless putting that on the share on samba failes again?! >> >> Also - some of the ancient driver (HP4050, HP4250) which are the >> easyest one (did that manually on Samba 3.x years ago) also fail on >> putting the driver remote for download. >> >> I'm trying this from a W8.1 WS >> >> Thanks! >> Franz >> >> >>>>> L.P.H. van Belle <belle at bazuin.nl> 04.06.2017 00:38 >>> >> >>> Op 1 jun. 2017 om 15:20 heeft Franz Gansberger via samba >>> <samba at lists.samba.org> het volgende geschreven: >>> >>> Hi all, >>> >>> according to this thread, I ran into the same situation: >>> >>> [2017/06/01 10:35:46.909754, 0] >>> ../source3/rpc_server/spoolss/srv_spoolss_nt.c:8476(_spoolss_AddPrinterDriverEx) >>> _spoolss_AddPrinterDriverEx: level 8 not yet implemented >>> [2017/06/01 10:35:46.925055, 0] >>> ../source3/printing/nt_printing.c:1097(move_driver_file_to_download_area) >>> move_driver_file_to_download_area: Unable to rename >>> [x64/kmfc5150_xps] to [x64/3/KMFC5150_XPS]: >>> NT_STATUS_OBJECT_NAME_NOT_FOUND >>> >>> >>> [print$] >>> path = /data/data/printerdrivers/ >>> read only = no >>> acl_xattr:ignore system acl = yes >>> browseable = yes >>> guest ok = no >>> write list = root, administrator, @"Domain Admins", @lpadmin, >>> @"Print Operators" >>> >>> >>> Samba version 4.5.8-Debian >>> >>> I followed all the hints from Rowland, but... >>> >>> Has there been any solution so far? >>> Appreciate any thoughts.. >>> :-) >>> >>> Franz >>> -- >>> To unsubscribe from this list go to the following URL and read the >>> instructions: https://lists.samba.org/mailman/options/samba >> if it a kyocera driver, you need to cleanup all 32bit parts from the >> inf. >> >> and you can try >> ln -s x64 X64 in the driver folder >> >> last xps driver? cant test this atm but try the pcl or ps version. >> >> there is a post of me which tells verything you need to know for a >> printer (cups) set on debian. (google for it, use l.p.h in your search) >> >> last, you only need the first three line if you use acl_xattr:ignore >> system acl = yes >> and configure the share from a windows client. >> >> dont mix posix acl settings and acl_xattr:ignore system acl = yes >> >> still no go after above, i can test next wednesday and give better help. >> >> ps? that driver is it a 'level 3 Windows driver' since level 4 and up >> are not supported yet. ( the error msg shows level 8, but that not >> the windows level) >> >> greetz >> >> Louis >> >> > >