Hello James,
Even after setting the rfc2307 in smb.conf replication error continues
and password change error continues. Error thrown while forcing
replication is shown below.
-------------------------------------------------------------------
Even after setting RFC, DC2 is not getting synced from DC1. Connection
time out error comes.
#samba-tool drs replicate DC2.KTKBANKLTD.COM <http://DC2.KTKBANKLTD.COM>
DC1.KTKBANKLTD.COM <http://DC1.KTKBANKLTD.COM>
DC=ForestDnsZones,DC=KTKBANKLTD,DC=COM
Failed to bind to uuid e3514235-4b06-11d1-ab04-00c04fc2dcd2 for
ncacn_ip_tcp:172.20.107.31[1024,seal,target_hostname=DC2.KTKBANKLTD.COM
<http://DC2.KTKBANKLTD.COM>,abstract_syntax=e3514235-4b06-11d1-ab04-00c04fc2dcd2/0x00000004,localaddress=172.20.107.31]
NT_STATUS_IO_TIMEOUT
ERROR(<class 'samba.drs_utils.drsException'>): DRS connection to
DC2.KTKBANKLTD.COM <http://DC2.KTKBANKLTD.COM> failed - drsException:
DRS connection to DC2.KTKBANKLTD.COM <http://DC2.KTKBANKLTD.COM> failed:
(-1073741643, '{Device Timeout} The specified I/O operation on %hs was
not completed before the time-out period expired.')
File
"/usr/local/samba/lib64/python2.7/site-packages/samba/netcmd/drs.py",
line 41, in drsuapi_connect
(ctx.drsuapi, ctx.drsuapi_handle, ctx.bind_supported_extensions) =
drs_utils.drsuapi_connect(ctx.server, ctx.lp, ctx.creds)
File
"/usr/local/samba/lib64/python2.7/site-packages/samba/drs_utils.py",
line 54, in drsuapi_connect
raise drsException("DRS connection to %s failed: %s" % (server,
e))
----------------------------------------------------------------------
Also, as you had suggested, we have run the command 'samba-tool domain
passwordsettinsg show'
----------------------------------------------------------------------
Before modification:
Password informations for domain 'DC=ktkbankltd,DC=com'
Password complexity: on
Store plaintext passwords: off
Password history length: 24
Minimum password length: 7
Minimum password age (days): 1
Maximum password age (days): 42
Account lockout duration (mins): 30
Account lockout threshold (attempts): 0
Reset account lockout after (mins): 30
----------------------------------------------------------------------------------
Passowrd information for domain after modification using samba-tool:
Password informations for domain 'DC=ktkbankltd,DC=com'
Password complexity: off
Store plaintext passwords: off
Password history length: 3
Minimum password length: 7
Minimum password age (days): 0
Maximum password age (days): 60
Account lockout duration (mins): 30
Account lockout threshold (attempts): 0
Reset account lockout after (mins): 30
---------------------------------------------------------------------------------
When we reset the password policy using samba-tool, after about 10
minutes, the policy comes to DC2 from DC1 and users are allowed to
change their password. Now we have disabled the GPO for Password settings.
Probably I feel, due to this replication issue, the DB is becoming
inconsistent and errors are being thrown. Also, DNS errors appear to
exist in the Domain Controllers. We are using INTERNAL DNS which is
adding to problem.
Request you to help us in solving this issue.
--
Thanks & Regards,
Anantha Raghava
DISCLAIMER:
This e-mail communication and any attachments may be privileged and
confidential to eXza Technology Consulting & Services, and are intended
only for the use of the recipients named above If you are not the
addressee you may not copy, forward, disclose or use any part of it. If
you have received this message in error, please delete it and all copies
from your system and notify the sender immediately by return e-mail.
Internet communications cannot be guaranteed to be timely, secure, error
or virus-free. The sender does not accept liability for any errors or
omissions.
Do not print this e-mail unless required. Save Paper & trees.
On Thursday 04 May 2017 06:15 PM, lingpanda101 wrote:>
> Thanks & Regards,
>
On 5/5/2017 11:08 AM, Anantha Raghava wrote:> > Hello James, > > Even after setting the rfc2307 in smb.conf replication error continues > and password change error continues. Error thrown while forcing > replication is shown below. > > ------------------------------------------------------------------- > Even after setting RFC, DC2 is not getting synced from DC1. Connection > time out error comes. > > #samba-tool drs replicate DC2.KTKBANKLTD.COM > <http://DC2.KTKBANKLTD.COM> DC1.KTKBANKLTD.COM > <http://DC1.KTKBANKLTD.COM> DC=ForestDnsZones,DC=KTKBANKLTD,DC=COM > > Failed to bind to uuid e3514235-4b06-11d1-ab04-00c04fc2dcd2 for > ncacn_ip_tcp:172.20.107.31[1024,seal,target_hostname=DC2.KTKBANKLTD.COM > <http://DC2.KTKBANKLTD.COM>,abstract_syntax=e3514235-4b06-11d1-ab04-00c04fc2dcd2/0x00000004,localaddress=172.20.107.31] > NT_STATUS_IO_TIMEOUT > ERROR(<class 'samba.drs_utils.drsException'>): DRS connection to > DC2.KTKBANKLTD.COM <http://DC2.KTKBANKLTD.COM> failed - drsException: > DRS connection to DC2.KTKBANKLTD.COM <http://DC2.KTKBANKLTD.COM> > failed: (-1073741643, '{Device Timeout} The specified I/O operation on > %hs was not completed before the time-out period expired.') > File > "/usr/local/samba/lib64/python2.7/site-packages/samba/netcmd/drs.py", > line 41, in drsuapi_connect > (ctx.drsuapi, ctx.drsuapi_handle, ctx.bind_supported_extensions) = > drs_utils.drsuapi_connect(ctx.server, ctx.lp, ctx.creds) > File > "/usr/local/samba/lib64/python2.7/site-packages/samba/drs_utils.py", > line 54, in drsuapi_connect > raise drsException("DRS connection to %s failed: %s" % (server, e)) > ---------------------------------------------------------------------- > > Also, as you had suggested, we have run the command 'samba-tool domain > passwordsettinsg show' > ---------------------------------------------------------------------- > Before modification: > > Password informations for domain 'DC=ktkbankltd,DC=com' > > Password complexity: on > Store plaintext passwords: off > Password history length: 24 > Minimum password length: 7 > Minimum password age (days): 1 > Maximum password age (days): 42 > Account lockout duration (mins): 30 > Account lockout threshold (attempts): 0 > Reset account lockout after (mins): 30 > ---------------------------------------------------------------------------------- > Passowrd information for domain after modification using samba-tool: > > Password informations for domain 'DC=ktkbankltd,DC=com' > > Password complexity: off > Store plaintext passwords: off > Password history length: 3 > Minimum password length: 7 > Minimum password age (days): 0 > Maximum password age (days): 60 > Account lockout duration (mins): 30 > Account lockout threshold (attempts): 0 > Reset account lockout after (mins): 30 > --------------------------------------------------------------------------------- > > When we reset the password policy using samba-tool, after about 10 > minutes, the policy comes to DC2 from DC1 and users are allowed to > change their password. Now we have disabled the GPO for Password > settings. > > Probably I feel, due to this replication issue, the DB is becoming > inconsistent and errors are being thrown. Also, DNS errors appear to > exist in the Domain Controllers. We are using INTERNAL DNS which is > adding to problem. > > Request you to help us in solving this issue. > > -- > > Thanks & Regards, > > > Anantha Raghava > > > DISCLAIMER: > This e-mail communication and any attachments may be privileged and > confidential to eXza Technology Consulting & Services, and are > intended only for the use of the recipients named above If you are not > the addressee you may not copy, forward, disclose or use any part of > it. If you have received this message in error, please delete it and > all copies from your system and notify the sender immediately by > return e-mail. Internet communications cannot be guaranteed to be > timely, secure, error or virus-free. The sender does not accept > liability for any errors or omissions. > > > Do not print this e-mail unless required. Save Paper & trees. > > On Thursday 04 May 2017 06:15 PM, lingpanda101 wrote: >> >> Thanks & Regards, >> >The error on replication is failed: (-1073741643, '{Device Timeout} The specified I/O operation on %hs was not completed before the time-out period expired Are DC1 and DC2 in the same geographical location? Can you post the results of 'samba-tool drs showrepl' from DC1 and DC2? It also appears you are missing 'dns forwarder =' in DC2 smb.conf I see you commented this out of DC1 #interfaces = 127.0.0.1 172.20.107.30 I would verify you have correctly assigned the proper hostname and static IP's on each DC. Can you run this command again and append -d 4? This will provide additional debug info. 'samba-tool drs replicate DC2.KTKBANKLTD.COM <http://DC2.KTKBANKLTD.COM> DC1.KTKBANKLTD.COM <http://DC1.KTKBANKLTD.COM> DC=ForestDnsZones,DC=KTKBANKLTD,DC=COM -d 4' I'm also unclear from your message if you are still having password issues or not. -- -- James
Hello James,
To your questions:
*"Are DC1 and DC2 in the same geographical location?"*
Yes, they are in same location, & they are in the same subnet as well.
*"I'm also unclear from your message if you are still having password
issues or not."*
**It appears to have been resolved. When we randomly checked, users were
able to change their passwords. However logging in with new passwords
were taking sometime.
*"It also appears you are missing 'dns forwarder =' in DC2
smb.conf"*
**As we understand, the dns forwarder is only used for resolving the
names that are not in Internal DNS A Records right? Now the forwarder
DNS will not have DC1 or DC2 records. Should it not resolve internally?
We even changed the nameserver in resolv.conf, put the IP of DC1 and DC2
both there, same error appears.
Even on DC1, when we use nslookup to check the dns forwarding, it
returns an error confirming that it is not forwarding.
I will share the output of the command you mentioned and also the output
of nslookup from both DC1 and DC2.
--
Thanks & Regards,
Anantha Raghava
DISCLAIMER:
This e-mail communication and any attachments may be privileged and
confidential to eXza Technology Consulting & Services, and are intended
only for the use of the recipients named above If you are not the
addressee you may not copy, forward, disclose or use any part of it. If
you have received this message in error, please delete it and all copies
from your system and notify the sender immediately by return e-mail.
Internet communications cannot be guaranteed to be timely, secure, error
or virus-free. The sender does not accept liability for any errors or
omissions.
Do not print this e-mail unless required. Save Paper & trees.
On Friday 05 May 2017 09:03 PM, lingpanda101 wrote:> On 5/5/2017 11:08 AM, Anantha Raghava wrote:
>>
>> Hello James,
>>
>> Even after setting the rfc2307 in smb.conf replication error
>> continues and password change error continues. Error thrown while
>> forcing replication is shown below.
>>
>> -------------------------------------------------------------------
>> Even after setting RFC, DC2 is not getting synced from DC1.
>> Connection time out error comes.
>>
>> #samba-tool drs replicate DC2.KTKBANKLTD.COM
>> <http://DC2.KTKBANKLTD.COM> DC1.KTKBANKLTD.COM
>> <http://DC1.KTKBANKLTD.COM>
DC=ForestDnsZones,DC=KTKBANKLTD,DC=COM
>>
>> Failed to bind to uuid e3514235-4b06-11d1-ab04-00c04fc2dcd2 for
>> ncacn_ip_tcp:172.20.107.31[1024,seal,target_hostname=DC2.KTKBANKLTD.COM
>>
<http://DC2.KTKBANKLTD.COM>,abstract_syntax=e3514235-4b06-11d1-ab04-00c04fc2dcd2/0x00000004,localaddress=172.20.107.31]
>> NT_STATUS_IO_TIMEOUT
>> ERROR(<class 'samba.drs_utils.drsException'>): DRS
connection to
>> DC2.KTKBANKLTD.COM <http://DC2.KTKBANKLTD.COM> failed -
drsException:
>> DRS connection to DC2.KTKBANKLTD.COM <http://DC2.KTKBANKLTD.COM>
>> failed: (-1073741643, '{Device Timeout} The specified I/O operation
>> on %hs was not completed before the time-out period expired.')
>> File
>>
"/usr/local/samba/lib64/python2.7/site-packages/samba/netcmd/drs.py",
>> line 41, in drsuapi_connect
>> (ctx.drsuapi, ctx.drsuapi_handle, ctx.bind_supported_extensions)
>> = drs_utils.drsuapi_connect(ctx.server, ctx.lp, ctx.creds)
>> File
>>
"/usr/local/samba/lib64/python2.7/site-packages/samba/drs_utils.py",
>> line 54, in drsuapi_connect
>> raise drsException("DRS connection to %s failed: %s" %
(server, e))
>> ----------------------------------------------------------------------
>>
>> Also, as you had suggested, we have run the command 'samba-tool
>> domain passwordsettinsg show'
>> ----------------------------------------------------------------------
>> Before modification:
>>
>> Password informations for domain 'DC=ktkbankltd,DC=com'
>>
>> Password complexity: on
>> Store plaintext passwords: off
>> Password history length: 24
>> Minimum password length: 7
>> Minimum password age (days): 1
>> Maximum password age (days): 42
>> Account lockout duration (mins): 30
>> Account lockout threshold (attempts): 0
>> Reset account lockout after (mins): 30
>>
----------------------------------------------------------------------------------
>> Passowrd information for domain after modification using samba-tool:
>>
>> Password informations for domain 'DC=ktkbankltd,DC=com'
>>
>> Password complexity: off
>> Store plaintext passwords: off
>> Password history length: 3
>> Minimum password length: 7
>> Minimum password age (days): 0
>> Maximum password age (days): 60
>> Account lockout duration (mins): 30
>> Account lockout threshold (attempts): 0
>> Reset account lockout after (mins): 30
>>
---------------------------------------------------------------------------------
>>
>> When we reset the password policy using samba-tool, after about 10
>> minutes, the policy comes to DC2 from DC1 and users are allowed to
>> change their password. Now we have disabled the GPO for Password
>> settings.
>>
>> Probably I feel, due to this replication issue, the DB is becoming
>> inconsistent and errors are being thrown. Also, DNS errors appear to
>> exist in the Domain Controllers. We are using INTERNAL DNS which is
>> adding to problem.
>>
>> Request you to help us in solving this issue.
>>
>> --
>>
>> Thanks & Regards,
>>
>>
>> Anantha Raghava
>>
>>
>> DISCLAIMER:
>> This e-mail communication and any attachments may be privileged and
>> confidential to eXza Technology Consulting & Services, and are
>> intended only for the use of the recipients named above If you are
>> not the addressee you may not copy, forward, disclose or use any part
>> of it. If you have received this message in error, please delete it
>> and all copies from your system and notify the sender immediately by
>> return e-mail. Internet communications cannot be guaranteed to be
>> timely, secure, error or virus-free. The sender does not accept
>> liability for any errors or omissions.
>>
>>
>> Do not print this e-mail unless required. Save Paper & trees.
>>
>> On Thursday 04 May 2017 06:15 PM, lingpanda101 wrote:
>>>
>>> Thanks & Regards,
>>>
>>
> The error on replication is
>
> failed: (-1073741643, '{Device Timeout} The specified I/O operation on
> %hs was not completed before the time-out period expired
>
> Are DC1 and DC2 in the same geographical location? Can you post the
> results of
>
> 'samba-tool drs showrepl' from DC1 and DC2?
>
> It also appears you are missing
>
> 'dns forwarder ='
>
> in DC2 smb.conf
>
> I see you commented this out of DC1
>
> #interfaces = 127.0.0.1 172.20.107.30
>
> I would verify you have correctly assigned the proper hostname and
> static IP's on each DC. Can you run this command again and append -d
> 4? This will provide additional debug info.
>
>
> 'samba-tool drs replicate DC2.KTKBANKLTD.COM
> <http://DC2.KTKBANKLTD.COM> DC1.KTKBANKLTD.COM
> <http://DC1.KTKBANKLTD.COM> DC=ForestDnsZones,DC=KTKBANKLTD,DC=COM -d
4'
>
> I'm also unclear from your message if you are still having password
> issues or not.
>
>
>
>
> --
> --
> James