Am 30.06.2016 um 10:45 schrieb Mark Foley:> To revisit my problem: I have Dovecot running on the same host as Samba4 AD/DC. I've set > Thunderbird to authenticate with GSSAPI on a domain workstation. I have an /etc/krb5.keytab > file as required by Dovecot. I've also downloaded and installed Kerberos for access to > the k* commands (ktutil, kinit, klist, ...). > > In my current setup, the Thunderbird client (WIN7 workstation) is not connecting. The WIN7 > workstation is a domain member and works fine otherwise with Samba4 for AD user authentication, > etc. Thunderbird gives the following error: > > "The Kerberos/GSSAPI ticket was not accepted by the IMAP server mark at ohprs.org. Please check > that you are logged in to the Kerberos/GSSAPI realm." > > One disconcerting bit about that message is the named IMAP server "mark at ohprs.org" is not a > server at all, but rather the email address of the Thunderbird account. > > When attempting to connect, the Dovecot log simply has "Disconnected (no auth attempts in 18 > secs): user=<>". No message at all appears in the samba log although I have auth:10 level set. > Dovecot's 'configuration' for GSSAPI consists of nothing more than specifying: > > auth_mechanisms = plain login gssapi > > That's it (the other mechanism work just fine, BTW). Not much I can mess with there. > > I think the problem is with Samba and handling the authentication. I do not think my Samba4 is > configured correctly. Over a year ago Rowland Penny helped me configure a Ubuntu workstation > for single-sign-on using Kerberos. He had me put the following lines into that workstation's > smb.conf file, none of which appear in the provisioned smb.conf on the Samba4 AD/DC server: > > security = ADS > dedicated keytab file = /etc/krb5.keytab > kerberos method = secrets and keytab > winbind nss info = rfc2307 > winbind trusted domains only = no > winbind enum users = yes > winbind enum groups = yes > winbind refresh tickets = Yes > > I've tried sticking all of these in the AD/DC smb.conf and, when restarting Samba, I get a log > message, "Samba detected misconfigured 'server role' and exited." > > He also had me put the following in /etc/nsswitch.conf: > > passwd: compat winbind > group: compat winbind > > Do I possibly need some of these (or others?) settings in these conf files on the AD/DC server > for Dovecot to authenticate? Obviously, blindly throwing them all into smb.conf doesn't work. > > Need Help! Thanks --MarkHello Mark, This is what i used in debian wheezy few years back. I assume arcfour-hmac is unsafe these days but i did not yet investigate into other working encryption methods here. If you need smtp (postfix with auth via dovecot) also add the smtp spn's. Use the password for user dovecot during keytab creation. 1. Create an user samba-tool create user dovcot 2. Add the spn samba-tool spn add smtp/server.domain.local at DOMAIN.LOCAL dovecot samba-tool spn add imap/server.domain.local at DOMAIN.LOCAL dovecot 3. Create the keytab file ktutil addent -password -p smtp/server.domain.local at DOMAIN.LOCAL -k 1 -e arcfour-hmac addent -password -p imap/server.domain.local at DOMAIN.LOCAL -k 1 -e arcfour-hmac wkt /etc/dovecot/dovecot.keytab 4. Add this to your dovecot config # Kerberos auth_gssapi_hostname = "$ALL" auth_krb5_keytab = /etc/dovecot/dovecot.keytab Hope it helps, achim~
Achim, thanks a lot! A couple of questions on your suggested settings:> 1. Create an user > samba-tool create user dovcotI did this (actually `samba-tool user create dovecot`), but it asked for a password. I entered one. You didn't mention that, so I hope it's OK.> 2. Add the spn > samba-tool spn add smtp/server.domain.local at DOMAIN.LOCAL dovecot > samba-tool spn add imap/server.domain.local at DOMAIN.LOCAL dovecotDid that too. No issue there.> > 3. Create the keytab file > ktutil > addent -password -p smtp/server.domain.local at DOMAIN.LOCAL -k 1 -e > arcfour-hmac > addent -password -p imap/server.domain.local at DOMAIN.LOCAL -k 1 -e > arcfour-hmac > wkt /etc/dovecot/dovecot.keytabAs you can see, your text wrapped, but from the error message I got I assumed the -e [enctype] should hve been the arcfour-hmac on the next line. So I did: $ ktutil ktutil: addent -password -p smtp/server.domain.local at DOMAIN.LOCAL -k 1 -e arcfour-hmac ktutil: addent -password -p imap/server.domain.local at DOMAIN.LOCAL -k 1 -e arcfour-hmac Of course, that will probably also wrap when you get this message, but basically I put the arcfour-hmac on the same line as the addent. Each time, these commands also asked for a password. Again, you didn't mention that, but I used the same password I used for the `samab-tool user create` command above. I tried 'wkt /etc/dovecot/dovecot.keytab' while in ktutil, but I got, "Unknown request "wtk". Type '?' for a request list." In looking at the "?" list I saw 'wkt', so I assumed you simply transposed the letters. I tried it and it took.> 4. Add this to your dovecot config > > # Kerberos > auth_gssapi_hostname = "$ALL" > auth_krb5_keytab = /etc/dovecot/dovecot.keytabDid that. In addition, I set the keytab file's group to dovecot and made the file group readable, as suggested by http://wiki2.dovecot.org/Authentication/Kerberos. I also tried making it world readable. Now, after doing all that and restarting dovecot I still get the same dovecot error: Jun 30 16:59:54 imap-login: Info: Disconnected (no auth attempts in 6 secs): user=<>, rip=192.168.0.58, lip=192.168.0.2, TLS, session=<3hLnJoU2vgDAqAA6> and still the same error in Thunderbird: "The Kerberos/DSSAPI ticket was not accepted by the IMAP server mark at ohprs.org. Please check that you are logged in to the Kerberos/GSSAPI realm." As I've mentioned before, "mark at ohprs.org" is not a server. It is the email address of the Thunderbird account (running on WIN7). Here is my doveconf -n (gssapi marked with *): auth_debug_passwords = yes * auth_gssapi_hostname = $ALL * auth_krb5_keytab = /etc/krb5.keytab * auth_mechanisms = plain login gssapi auth_verbose = yes auth_verbose_passwords = plain disable_plaintext_auth = no info_log_path = /var/log/dovecot_info mail_location = maildir:~/Maildir passdb { driver = shadow } protocols = imap ssl_cert = </etc/ssl/certs/OHPRS/GoDaddy/Apache/2015-08-14/57aa6ed6ae98b4c7.crt ssl_key = </etc/ssl/certs/OHPRS/GoDaddy/mail.ohprs.org.key userdb { driver = passwd } verbose_ssl = yes (yes, I put the keytab file in /etc/krb5.keytab, not in etc/dovecot. Should be OK, right?) Here is my keytab list (partial); note that every entry appears in triplicate. I don't see 'dovecot' in there at all; maybe that's OK: ktutil: list slot KVNO Principal ---- ---- --------------------------------------------------------------------- 1 18 COMMON$@HPRS.LOCAL 2 18 COMMON$@HPRS.LOCAL 3 18 COMMON$@HPRS.LOCAL 4 1 MAIL$@HPRS.LOCAL 5 1 MAIL$@HPRS.LOCAL 6 1 MAIL$@HPRS.LOCAL 7 1 charmaine at HPRS.LOCAL 8 1 charmaine at HPRS.LOCAL 9 1 charmaine at HPRS.LOCAL : 19 1 Administrator at HPRS.LOCAL 20 1 Administrator at HPRS.LOCAL 21 1 Administrator at HPRS.LOCAL : 91 1 krbtgt at HPRS.LOCAL 92 1 krbtgt at HPRS.LOCAL 93 1 krbtgt at HPRS.LOCAL : 97 1 smtp/server.domain.local at DOMAIN.LOCAL 98 1 imap/server.domain.local at DOMAIN.LOCAL Can you tell from any of this why I'm still not able to authenticate? Thanks, --Mark -----Original Message-----> To: samba at lists.samba.org > From: Achim Gottinger <achim at ag-web.biz> > Date: Thu, 30 Jun 2016 11:51:34 +0200 > > Am 30.06.2016 um 10:45 schrieb Mark Foley: > > To revisit my problem: I have Dovecot running on the same host as Samba4 AD/DC. I've set > > Thunderbird to authenticate with GSSAPI on a domain workstation. I have an /etc/krb5.keytab > > file as required by Dovecot. I've also downloaded and installed Kerberos for access to > > the k* commands (ktutil, kinit, klist, ...). > > > > In my current setup, the Thunderbird client (WIN7 workstation) is not connecting. The WIN7 > > workstation is a domain member and works fine otherwise with Samba4 for AD user authentication, > > etc. Thunderbird gives the following error: > > > > "The Kerberos/GSSAPI ticket was not accepted by the IMAP server mark at ohprs.org. Please check > > that you are logged in to the Kerberos/GSSAPI realm." > > > > One disconcerting bit about that message is the named IMAP server "mark at ohprs.org" is not a > > server at all, but rather the email address of the Thunderbird account. > > > > When attempting to connect, the Dovecot log simply has "Disconnected (no auth attempts in 18 > > secs): user=<>". No message at all appears in the samba log although I have auth:10 level set. > > Dovecot's 'configuration' for GSSAPI consists of nothing more than specifying: > > > > auth_mechanisms = plain login gssapi > > > > That's it (the other mechanism work just fine, BTW). Not much I can mess with there. > > > > I think the problem is with Samba and handling the authentication. I do not think my Samba4 is > > configured correctly. Over a year ago Rowland Penny helped me configure a Ubuntu workstation > > for single-sign-on using Kerberos. He had me put the following lines into that workstation's > > smb.conf file, none of which appear in the provisioned smb.conf on the Samba4 AD/DC server: > > > > security = ADS > > dedicated keytab file = /etc/krb5.keytab > > kerberos method = secrets and keytab > > winbind nss info = rfc2307 > > winbind trusted domains only = no > > winbind enum users = yes > > winbind enum groups = yes > > winbind refresh tickets = Yes > > > > I've tried sticking all of these in the AD/DC smb.conf and, when restarting Samba, I get a log > > message, "Samba detected misconfigured 'server role' and exited." > > > > He also had me put the following in /etc/nsswitch.conf: > > > > passwd: compat winbind > > group: compat winbind > > > > Do I possibly need some of these (or others?) settings in these conf files on the AD/DC server > > for Dovecot to authenticate? Obviously, blindly throwing them all into smb.conf doesn't work. > > > > Need Help! Thanks --Mark > Hello Mark, > > This is what i used in debian wheezy few years back. I assume > arcfour-hmac is unsafe these days but i did not yet investigate into > other working encryption methods here. > If you need smtp (postfix with auth via dovecot) also add the smtp > spn's. Use the password for user dovecot during keytab creation. > > 1. Create an user > samba-tool create user dovcot > > 2. Add the spn > samba-tool spn add smtp/server.domain.local at DOMAIN.LOCAL dovecot > samba-tool spn add imap/server.domain.local at DOMAIN.LOCAL dovecot > > 3. Create the keytab file > ktutil > addent -password -p smtp/server.domain.local at DOMAIN.LOCAL -k 1 -e > arcfour-hmac > addent -password -p imap/server.domain.local at DOMAIN.LOCAL -k 1 -e > arcfour-hmac > wkt /etc/dovecot/dovecot.keytab > > 4. Add this to your dovecot config > > # Kerberos > auth_gssapi_hostname = "$ALL" > auth_krb5_keytab = /etc/dovecot/dovecot.keytab > > Hope it helps, > achim~ > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba >
Am 30.06.2016 um 23:16 schrieb Mark Foley:> Achim, thanks a lot! A couple of questions on your suggested settings: > >> 1. Create an user >> samba-tool create user dovcot > I did this (actually `samba-tool user create dovecot`), but it asked for a password. I > entered one. You didn't mention that, so I hope it's OK.Yes> > >> 2. Add the spn >> samba-tool spn add smtp/server.domain.local at DOMAIN.LOCAL dovecot >> samba-tool spn add imap/server.domain.local at DOMAIN.LOCAL dovecot > Did that too. No issue there.Well you must substitute server.domain.local with your mailserver fqdn and DOMAIN.LOCAL with HPRS.LOCAL.> >> 3. Create the keytab file >> ktutil >> addent -password -p smtp/server.domain.local at DOMAIN.LOCAL -k 1 -e >> arcfour-hmac >> addent -password -p imap/server.domain.local at DOMAIN.LOCAL -k 1 -e >> arcfour-hmac >> wkt /etc/dovecot/dovecot.keytab > As you can see, your text wrapped, but from the error message I got I assumed the -e [enctype] > should hve been the arcfour-hmac on the next line. So I did: > > $ ktutil > ktutil: addent -password -p smtp/server.domain.local at DOMAIN.LOCAL -k 1 -e arcfour-hmac > ktutil: addent -password -p imap/server.domain.local at DOMAIN.LOCAL -k 1 -e arcfour-hmacSame here substitute like above and as you said arcfour-hmac belongs in the same line.> Of course, that will probably also wrap when you get this message, but basically I put the > arcfour-hmac on the same line as the addent. Each time, these commands also asked for a > password. Again, you didn't mention that, but I used the same password I used for the > `samab-tool user create` command above. > > I tried 'wkt /etc/dovecot/dovecot.keytab' while in ktutil, but I got, "Unknown request "wtk". > Type '?' for a request list." In looking at the "?" list I saw 'wkt', so I assumed you simply > transposed the letters. I tried it and it took.Yes wkt is the command, but make sure /etc/dovecot/dovecot.keytab does not yet exist. Only the two keys you just added are required to get kerberos working. The system keytab you generated with samba-tool domain exportkeytab is not required.> > >> 4. Add this to your dovecot config >> >> # Kerberos >> auth_gssapi_hostname = "$ALL" >> auth_krb5_keytab = /etc/dovecot/dovecot.keytab > Did that. In addition, I set the keytab file's group to dovecot and made the file group > readable, as suggested by http://wiki2.dovecot.org/Authentication/Kerberos. I also tried > making it world readable. Now, after doing all that and restarting dovecot I still get the > same dovecot error: > > Jun 30 16:59:54 imap-login: Info: Disconnected (no auth attempts in 6 secs): user=<>, rip=192.168.0.58, lip=192.168.0.2, TLS, session=<3hLnJoU2vgDAqAA6> > > and still the same error in Thunderbird: "The Kerberos/DSSAPI ticket was not accepted by the > IMAP server mark at ohprs.org. Please check that you are logged in to the Kerberos/GSSAPI realm." > > As I've mentioned before, "mark at ohprs.org" is not a server. It is the email address of the > Thunderbird account (running on WIN7). > > Here is my doveconf -n (gssapi marked with *): > > auth_debug_passwords = yes > * auth_gssapi_hostname = $ALL > * auth_krb5_keytab = /etc/krb5.keytab > * auth_mechanisms = plain login gssapi > auth_verbose = yes > auth_verbose_passwords = plain > disable_plaintext_auth = no > info_log_path = /var/log/dovecot_info > mail_location = maildir:~/Maildir > passdb { > driver = shadow > } > protocols = imap > ssl_cert = </etc/ssl/certs/OHPRS/GoDaddy/Apache/2015-08-14/57aa6ed6ae98b4c7.crt > ssl_key = </etc/ssl/certs/OHPRS/GoDaddy/mail.ohprs.org.key > userdb { > driver = passwd > } > verbose_ssl = yes > > (yes, I put the keytab file in /etc/krb5.keytab, not in etc/dovecot. Should be OK, right?) > > Here is my keytab list (partial); note that every entry appears in triplicate. I don't see > 'dovecot' in there at all; maybe that's OK: > > ktutil: list > slot KVNO Principal > ---- ---- --------------------------------------------------------------------- > 1 18 COMMON$@HPRS.LOCAL > 2 18 COMMON$@HPRS.LOCAL > 3 18 COMMON$@HPRS.LOCAL > 4 1 MAIL$@HPRS.LOCAL > 5 1 MAIL$@HPRS.LOCAL > 6 1 MAIL$@HPRS.LOCAL > 7 1 charmaine at HPRS.LOCAL > 8 1 charmaine at HPRS.LOCAL > 9 1 charmaine at HPRS.LOCAL > : > 19 1 Administrator at HPRS.LOCAL > 20 1 Administrator at HPRS.LOCAL > 21 1 Administrator at HPRS.LOCAL > : > 91 1 krbtgt at HPRS.LOCAL > 92 1 krbtgt at HPRS.LOCAL > 93 1 krbtgt at HPRS.LOCAL > : > 97 1 smtp/server.domain.local at DOMAIN.LOCAL > 98 1 imap/server.domain.local at DOMAIN.LOCAL > > Can you tell from any of this why I'm still not able to authenticate?You only need the lines 97 and 98 and substitude fqdn and realm like i mentioned above. It must be possible for Thunderbird to use plain authentification with your windows account username. Can be you must configure userdb and passdb to do ldap lookups against active directory.> Thanks, --Mark > > -----Original Message----- >> To: samba at lists.samba.org >> From: Achim Gottinger <achim at ag-web.biz> >> Date: Thu, 30 Jun 2016 11:51:34 +0200 >> >> Am 30.06.2016 um 10:45 schrieb Mark Foley: >>> To revisit my problem: I have Dovecot running on the same host as Samba4 AD/DC. I've set >>> Thunderbird to authenticate with GSSAPI on a domain workstation. I have an /etc/krb5.keytab >>> file as required by Dovecot. I've also downloaded and installed Kerberos for access to >>> the k* commands (ktutil, kinit, klist, ...). >>> >>> In my current setup, the Thunderbird client (WIN7 workstation) is not connecting. The WIN7 >>> workstation is a domain member and works fine otherwise with Samba4 for AD user authentication, >>> etc. Thunderbird gives the following error: >>> >>> "The Kerberos/GSSAPI ticket was not accepted by the IMAP server mark at ohprs.org. Please check >>> that you are logged in to the Kerberos/GSSAPI realm." >>> >>> One disconcerting bit about that message is the named IMAP server "mark at ohprs.org" is not a >>> server at all, but rather the email address of the Thunderbird account. >>> >>> When attempting to connect, the Dovecot log simply has "Disconnected (no auth attempts in 18 >>> secs): user=<>". No message at all appears in the samba log although I have auth:10 level set. >>> Dovecot's 'configuration' for GSSAPI consists of nothing more than specifying: >>> >>> auth_mechanisms = plain login gssapi >>> >>> That's it (the other mechanism work just fine, BTW). Not much I can mess with there. >>> >>> I think the problem is with Samba and handling the authentication. I do not think my Samba4 is >>> configured correctly. Over a year ago Rowland Penny helped me configure a Ubuntu workstation >>> for single-sign-on using Kerberos. He had me put the following lines into that workstation's >>> smb.conf file, none of which appear in the provisioned smb.conf on the Samba4 AD/DC server: >>> >>> security = ADS >>> dedicated keytab file = /etc/krb5.keytab >>> kerberos method = secrets and keytab >>> winbind nss info = rfc2307 >>> winbind trusted domains only = no >>> winbind enum users = yes >>> winbind enum groups = yes >>> winbind refresh tickets = Yes >>> >>> I've tried sticking all of these in the AD/DC smb.conf and, when restarting Samba, I get a log >>> message, "Samba detected misconfigured 'server role' and exited." >>> >>> He also had me put the following in /etc/nsswitch.conf: >>> >>> passwd: compat winbind >>> group: compat winbind >>> >>> Do I possibly need some of these (or others?) settings in these conf files on the AD/DC server >>> for Dovecot to authenticate? Obviously, blindly throwing them all into smb.conf doesn't work. >>> >>> Need Help! Thanks --Mark >> Hello Mark, >> >> This is what i used in debian wheezy few years back. I assume >> arcfour-hmac is unsafe these days but i did not yet investigate into >> other working encryption methods here. >> If you need smtp (postfix with auth via dovecot) also add the smtp >> spn's. Use the password for user dovecot during keytab creation. >> >> 1. Create an user >> samba-tool create user dovcot >> >> 2. Add the spn >> samba-tool spn add smtp/server.domain.local at DOMAIN.LOCAL dovecot >> samba-tool spn add imap/server.domain.local at DOMAIN.LOCAL dovecot >> >> 3. Create the keytab file >> ktutil >> addent -password -p smtp/server.domain.local at DOMAIN.LOCAL -k 1 -e >> arcfour-hmac >> addent -password -p imap/server.domain.local at DOMAIN.LOCAL -k 1 -e >> arcfour-hmac >> wkt /etc/dovecot/dovecot.keytab >> >> 4. Add this to your dovecot config >> >> # Kerberos >> auth_gssapi_hostname = "$ALL" >> auth_krb5_keytab = /etc/dovecot/dovecot.keytab >> >> Hope it helps, >> achim~ >> -- >> To unsubscribe from this list go to the following URL and read the >> instructions: https://lists.samba.org/mailman/options/samba >>