I think I found my problem, when configuring my second domain controller, I have created by mistake a round robin DNS entry on "Forward Lookup Zones -> ad.samdom.local". I speak of round-robin because I have two fields A pointing to the same domain Now I'm lost, you have a second domain controller in failover? If so, could you give me your DNS configuration? I need information on: Forward Lookup Zones -> ad.samdom.local. Forward Lookup Zones -> ad.samdom.local -> DomainDnsZones Forward Lookup Zones -> ad.samdom.local -> ForestDnsZones Currently I have two domain controllers in these areas (thus the round-robin). However, I have not touched the DomainDnsZones and ForestDnsZones areas, this had to be done by "samba-tool domain join" executed during installation but I'm not sure. Is it normal to have the round robin on ForestDnsZones and DomainDnsZones ? Please find attached the export of my DNS configuration. Thank you, Alexis. On 07/06/2016 16:05, Rowland penny wrote:> On 07/06/16 14:44, Alexis RIES wrote: >> I put the usermapping but this does not solve the problem. >> >> I do not use libpam_winbind and libpam-krb5 because I did not need to >> log in server using domain accounts, it seems to me that this is not >> mandatory, you confirm ? > > This could well be your problem, try installing them. My domain member > works and this seems to be the only difference between my domain > member and yours. > >> >> >> Here are the permissions of the file /etc/krb5.keytab: >> root at smb1:/home/adminlocal# ls -l /etc/krb5.keytab >> -rw------- 1 root root 2312 Jun 7 14:44 /etc/krb5.keytab > > That again is the same as my domain member > >> >> >> Avahi is not installed on this server >> >> For information, when I run "wbinfo -P", I have this result: >> SMB1 root @: / home / adminlocal # wbinfo -P >> checking the NETLOGON for domain [SAMDOM] dc connection to "" failed >> wbcPingDc2 (SAMDOM): error code Was NT_STATUS_USER_SESSION_DELETED >> (0xc0000203) >> > > This works for me: > > root at debnet:/home/rowland/ # wbinfo -P > checking the NETLOGON dc connection to "dc1.samdom.example.com" succeeded > > Rowland > > > >-- k Alexis RIES Service informatique Tel : 04.22.32.97.26 Fax : 04.84.25.27.40 Email : alexis.ries at kinaxia.fr http://www.kinaxia.fr -------------- next part -------------- Nom Type Données Horodateur _sites _tcp _udp DomainDnsZones ForestDnsZones (identique au dossier parent) Source de nom (SOA) [43], dc1.ad.samdom.local., hostmaster.ad.samdom.local. ?07/?06/?2016 17:00:00 (identique au dossier parent) Serveur de noms (NS) dc1.ad.samdom.local. statique (identique au dossier parent) Serveur de noms (NS) dc2.ad.samdom.local. ?17/?05/?2016 15:00:00 (identique au dossier parent) Hôte (A) 192.168.254.1 statique (identique au dossier parent) Hôte (A) 192.168.254.2 ?17/?05/?2016 11:00:00 ADMIN Hôte (A) 192.168.254.100 ?26/?05/?2016 11:00:00 dc1 Hôte (A) 192.168.254.1 statique dc2 Hôte (A) 192.168.254.2 ?17/?05/?2016 11:00:00 smb Hôte (A) 192.168.254.10 ?31/?12/?27077 09:00:00 smb Hôte (A) 192.168.254.11 ?31/?12/?27077 13:00:00 smb1 Hôte (A) 192.168.254.3 ?24/?05/?2016 14:00:00 smb2 Hôte (A) 192.168.254.4 ?24/?05/?2016 14:00:00 -------------- next part -------------- Nom Type Données Horodateur _sites _tcp (identique au dossier parent) Hôte (A) 192.168.254.1 statique (identique au dossier parent) Hôte (A) 192.168.254.2 ?17/?05/?2016 11:00:00 -------------- next part -------------- Nom Type Données Horodateur _sites _tcp (identique au dossier parent) Hôte (A) 192.168.254.1 statique (identique au dossier parent) Hôte (A) 192.168.254.2 ?17/?05/?2016 11:00:00
On 07/06/16 17:05, Alexis RIES wrote:> I think I found my problem, when configuring my second domain > controller, I have created by mistake a round robin DNS entry on > "Forward Lookup Zones -> ad.samdom.local". > I speak of round-robin because I have two fields A pointing to the > same domain > > Now I'm lost, you have a second domain controller in failover? > If so, could you give me your DNS configuration? I need information on: > > Forward Lookup Zones -> ad.samdom.local. > Forward Lookup Zones -> ad.samdom.local -> DomainDnsZones > Forward Lookup Zones -> ad.samdom.local -> ForestDnsZones > > Currently I have two domain controllers in these areas (thus the > round-robin). > However, I have not touched the DomainDnsZones and ForestDnsZones > areas, this had to be done by "samba-tool domain join" executed during > installation but I'm not sure. > > Is it normal to have the round robin on ForestDnsZones and > DomainDnsZones ? > > Please find attached the export of my DNS configuration. > > Thank you, > Alexis. > > > > On 07/06/2016 16:05, Rowland penny wrote: >> On 07/06/16 14:44, Alexis RIES wrote: >>> I put the usermapping but this does not solve the problem. >>> >>> I do not use libpam_winbind and libpam-krb5 because I did not need >>> to log in server using domain accounts, it seems to me that this is >>> not mandatory, you confirm ? >> >> This could well be your problem, try installing them. My domain >> member works and this seems to be the only difference between my >> domain member and yours. >> >>> >>> >>> Here are the permissions of the file /etc/krb5.keytab: >>> root at smb1:/home/adminlocal# ls -l /etc/krb5.keytab >>> -rw------- 1 root root 2312 Jun 7 14:44 /etc/krb5.keytab >> >> That again is the same as my domain member >> >>> >>> >>> Avahi is not installed on this server >>> >>> For information, when I run "wbinfo -P", I have this result: >>> SMB1 root @: / home / adminlocal # wbinfo -P >>> checking the NETLOGON for domain [SAMDOM] dc connection to "" failed >>> wbcPingDc2 (SAMDOM): error code Was NT_STATUS_USER_SESSION_DELETED >>> (0xc0000203) >>> >> >> This works for me: >> >> root at debnet:/home/rowland/ # wbinfo -P >> checking the NETLOGON dc connection to "dc1.samdom.example.com" >> succeeded >> >> Rowland >> >> >> >> > > >How did you obtain the three files you attached ? what command(s) did you run ? Are you using the internal DNS server on the DCs, or are you using Bind9? If you are using bind9, how have you configured it ? Rowland
I was wrong, the problem persists, it is not because of the DNS. You have the same configuration as me, but with two domains controller ? On 07/06/2016 18:05, Alexis RIES wrote:> I think I found my problem, when configuring my second domain > controller, I have created by mistake a round robin DNS entry on > "Forward Lookup Zones -> ad.samdom.local". > I speak of round-robin because I have two fields A pointing to the > same domain > > Now I'm lost, you have a second domain controller in failover? > If so, could you give me your DNS configuration? I need information on: > > Forward Lookup Zones -> ad.samdom.local. > Forward Lookup Zones -> ad.samdom.local -> DomainDnsZones > Forward Lookup Zones -> ad.samdom.local -> ForestDnsZones > > Currently I have two domain controllers in these areas (thus the > round-robin). > However, I have not touched the DomainDnsZones and ForestDnsZones > areas, this had to be done by "samba-tool domain join" executed during > installation but I'm not sure. > > Is it normal to have the round robin on ForestDnsZones and > DomainDnsZones ? > > Please find attached the export of my DNS configuration. > > Thank you, > Alexis. > > > > On 07/06/2016 16:05, Rowland penny wrote: >> On 07/06/16 14:44, Alexis RIES wrote: >>> I put the usermapping but this does not solve the problem. >>> >>> I do not use libpam_winbind and libpam-krb5 because I did not need >>> to log in server using domain accounts, it seems to me that this is >>> not mandatory, you confirm ? >> >> This could well be your problem, try installing them. My domain >> member works and this seems to be the only difference between my >> domain member and yours. >> >>> >>> >>> Here are the permissions of the file /etc/krb5.keytab: >>> root at smb1:/home/adminlocal# ls -l /etc/krb5.keytab >>> -rw------- 1 root root 2312 Jun 7 14:44 /etc/krb5.keytab >> >> That again is the same as my domain member >> >>> >>> >>> Avahi is not installed on this server >>> >>> For information, when I run "wbinfo -P", I have this result: >>> SMB1 root @: / home / adminlocal # wbinfo -P >>> checking the NETLOGON for domain [SAMDOM] dc connection to "" failed >>> wbcPingDc2 (SAMDOM): error code Was NT_STATUS_USER_SESSION_DELETED >>> (0xc0000203) >>> >> >> This works for me: >> >> root at debnet:/home/rowland/ # wbinfo -P >> checking the NETLOGON dc connection to "dc1.samdom.example.com" >> succeeded >> >> Rowland >> >> >> >> > > >
On 07/06/16 17:31, Alexis RIES wrote:> I was wrong, the problem persists, it is not because of the DNS. > You have the same configuration as me, but with two domains controller ? >I have two DCs but I don't know if the DNS is set up like yours, so can you please answer the questions from my last post ??? Rowland
lingpanda101 at gmail.com
2016-Jun-07 16:55 UTC
[Samba] Samba AD member lost domain join after reboot
On 6/7/2016 12:31 PM, Alexis RIES wrote:> I was wrong, the problem persists, it is not because of the DNS. > You have the same configuration as me, but with two domains controller ? > > On 07/06/2016 18:05, Alexis RIES wrote: >> I think I found my problem, when configuring my second domain >> controller, I have created by mistake a round robin DNS entry on >> "Forward Lookup Zones -> ad.samdom.local". >> I speak of round-robin because I have two fields A pointing to the >> same domain >> >> Now I'm lost, you have a second domain controller in failover? >> If so, could you give me your DNS configuration? I need information on: >> >> Forward Lookup Zones -> ad.samdom.local. >> Forward Lookup Zones -> ad.samdom.local -> DomainDnsZones >> Forward Lookup Zones -> ad.samdom.local -> ForestDnsZones >> >> Currently I have two domain controllers in these areas (thus the >> round-robin). >> However, I have not touched the DomainDnsZones and ForestDnsZones >> areas, this had to be done by "samba-tool domain join" executed >> during installation but I'm not sure. >> >> Is it normal to have the round robin on ForestDnsZones and >> DomainDnsZones ? >> >> Please find attached the export of my DNS configuration. >> >> Thank you, >> Alexis. >> >> >> >> On 07/06/2016 16:05, Rowland penny wrote: >>> On 07/06/16 14:44, Alexis RIES wrote: >>>> I put the usermapping but this does not solve the problem. >>>> >>>> I do not use libpam_winbind and libpam-krb5 because I did not need >>>> to log in server using domain accounts, it seems to me that this is >>>> not mandatory, you confirm ? >>> >>> This could well be your problem, try installing them. My domain >>> member works and this seems to be the only difference between my >>> domain member and yours. >>> >>>> >>>> >>>> Here are the permissions of the file /etc/krb5.keytab: >>>> root at smb1:/home/adminlocal# ls -l /etc/krb5.keytab >>>> -rw------- 1 root root 2312 Jun 7 14:44 /etc/krb5.keytab >>> >>> That again is the same as my domain member >>> >>>> >>>> >>>> Avahi is not installed on this server >>>> >>>> For information, when I run "wbinfo -P", I have this result: >>>> SMB1 root @: / home / adminlocal # wbinfo -P >>>> checking the NETLOGON for domain [SAMDOM] dc connection to "" failed >>>> wbcPingDc2 (SAMDOM): error code Was NT_STATUS_USER_SESSION_DELETED >>>> (0xc0000203) >>>> >>> >>> This works for me: >>> >>> root at debnet:/home/rowland/ # wbinfo -P >>> checking the NETLOGON dc connection to "dc1.samdom.example.com" >>> succeeded >>> >>> Rowland >>> >>> >>> >>> >> >> >> >Alexis can you run 'net ads testjoin -d 3' and report? Can you also verify replication is working on your DC's? -- -James
lingpanda101 at gmail.com
2016-Jun-07 17:00 UTC
[Samba] Samba AD member lost domain join after reboot
On 6/7/2016 12:31 PM, Alexis RIES wrote:> I was wrong, the problem persists, it is not because of the DNS. > You have the same configuration as me, but with two domains controller ? > > On 07/06/2016 18:05, Alexis RIES wrote: >> I think I found my problem, when configuring my second domain >> controller, I have created by mistake a round robin DNS entry on >> "Forward Lookup Zones -> ad.samdom.local". >> I speak of round-robin because I have two fields A pointing to the >> same domain >> >> Now I'm lost, you have a second domain controller in failover? >> If so, could you give me your DNS configuration? I need information on: >> >> Forward Lookup Zones -> ad.samdom.local. >> Forward Lookup Zones -> ad.samdom.local -> DomainDnsZones >> Forward Lookup Zones -> ad.samdom.local -> ForestDnsZones >> >> Currently I have two domain controllers in these areas (thus the >> round-robin). >> However, I have not touched the DomainDnsZones and ForestDnsZones >> areas, this had to be done by "samba-tool domain join" executed >> during installation but I'm not sure. >> >> Is it normal to have the round robin on ForestDnsZones and >> DomainDnsZones ? >> >> Please find attached the export of my DNS configuration. >> >> Thank you, >> Alexis. >> >> >> >> On 07/06/2016 16:05, Rowland penny wrote: >>> On 07/06/16 14:44, Alexis RIES wrote: >>>> I put the usermapping but this does not solve the problem. >>>> >>>> I do not use libpam_winbind and libpam-krb5 because I did not need >>>> to log in server using domain accounts, it seems to me that this is >>>> not mandatory, you confirm ? >>> >>> This could well be your problem, try installing them. My domain >>> member works and this seems to be the only difference between my >>> domain member and yours. >>> >>>> >>>> >>>> Here are the permissions of the file /etc/krb5.keytab: >>>> root at smb1:/home/adminlocal# ls -l /etc/krb5.keytab >>>> -rw------- 1 root root 2312 Jun 7 14:44 /etc/krb5.keytab >>> >>> That again is the same as my domain member >>> >>>> >>>> >>>> Avahi is not installed on this server >>>> >>>> For information, when I run "wbinfo -P", I have this result: >>>> SMB1 root @: / home / adminlocal # wbinfo -P >>>> checking the NETLOGON for domain [SAMDOM] dc connection to "" failed >>>> wbcPingDc2 (SAMDOM): error code Was NT_STATUS_USER_SESSION_DELETED >>>> (0xc0000203) >>>> >>> >>> This works for me: >>> >>> root at debnet:/home/rowland/ # wbinfo -P >>> checking the NETLOGON dc connection to "dc1.samdom.example.com" >>> succeeded >>> >>> Rowland >>> >>> >>> >>> >> >> >> >Actually can you run it at level 4? 'net ads testjoin -d 4' -- -James
Hi, I used the DNS management console, right click on zone and "export list". I use Bind9, and yes it is configured. Alexis. On 07/06/2016 18:29, Rowland penny wrote:> On 07/06/16 17:05, Alexis RIES wrote: >> I think I found my problem, when configuring my second domain >> controller, I have created by mistake a round robin DNS entry on >> "Forward Lookup Zones -> ad.samdom.local". >> I speak of round-robin because I have two fields A pointing to the >> same domain >> >> Now I'm lost, you have a second domain controller in failover? >> If so, could you give me your DNS configuration? I need information on: >> >> Forward Lookup Zones -> ad.samdom.local. >> Forward Lookup Zones -> ad.samdom.local -> DomainDnsZones >> Forward Lookup Zones -> ad.samdom.local -> ForestDnsZones >> >> Currently I have two domain controllers in these areas (thus the >> round-robin). >> However, I have not touched the DomainDnsZones and ForestDnsZones >> areas, this had to be done by "samba-tool domain join" executed >> during installation but I'm not sure. >> >> Is it normal to have the round robin on ForestDnsZones and >> DomainDnsZones ? >> >> Please find attached the export of my DNS configuration. >> >> Thank you, >> Alexis. >> >> >> >> On 07/06/2016 16:05, Rowland penny wrote: >>> On 07/06/16 14:44, Alexis RIES wrote: >>>> I put the usermapping but this does not solve the problem. >>>> >>>> I do not use libpam_winbind and libpam-krb5 because I did not need >>>> to log in server using domain accounts, it seems to me that this is >>>> not mandatory, you confirm ? >>> >>> This could well be your problem, try installing them. My domain >>> member works and this seems to be the only difference between my >>> domain member and yours. >>> >>>> >>>> >>>> Here are the permissions of the file /etc/krb5.keytab: >>>> root at smb1:/home/adminlocal# ls -l /etc/krb5.keytab >>>> -rw------- 1 root root 2312 Jun 7 14:44 /etc/krb5.keytab >>> >>> That again is the same as my domain member >>> >>>> >>>> >>>> Avahi is not installed on this server >>>> >>>> For information, when I run "wbinfo -P", I have this result: >>>> SMB1 root @: / home / adminlocal # wbinfo -P >>>> checking the NETLOGON for domain [SAMDOM] dc connection to "" failed >>>> wbcPingDc2 (SAMDOM): error code Was NT_STATUS_USER_SESSION_DELETED >>>> (0xc0000203) >>>> >>> >>> This works for me: >>> >>> root at debnet:/home/rowland/ # wbinfo -P >>> checking the NETLOGON dc connection to "dc1.samdom.example.com" >>> succeeded >>> >>> Rowland >>> >>> >>> >>> >> >> >> > > How did you obtain the three files you attached ? what command(s) did > you run ? > Are you using the internal DNS server on the DCs, or are you using Bind9? > If you are using bind9, how have you configured it ? > > Rowland >
Maybe Matching Threads
- Samba AD member lost domain join after reboot
- Samba AD member lost domain join after reboot
- Samba AD member lost domain join after reboot
- Strong(er) authentication required when joining Active Directory (Samba 3.0.28)
- Samba AD member lost domain join after reboot