thr3ads.net - samba - [Samba] inconsistent DNS information, windows domain member issues.. [Jun 2016]

If this information is useful, please help other people find it:
Share via:

2016-Jun-05 09:05 UTC

[Samba] inconsistent DNS information, windows domain member issues..

I joined a Windows 10 Pro system to my (still experimental) domain. The
windows system actually hosts DC2 as a VM, and another Windows (Server 2008
R2) at another location hosts DC1 also as a VM. The two locations are
connected via a VPN, both systems run only when needed. The windows system
does not directly use DC2 for DNS but instead talks to a DNS resolver that
delegates the samba Domain to DC2. DC2 uses itself as nameserver.

 

I am observing the following issues that may be related or not:

*       When I do a nslookup samba.domain DC2 I get the address of DC1,
nslookup DC2.sambadomain DC2 fails. Nslookup DC1.samba.domain DC2 works.
When I use dig @DC2 samba.domain it returns DC1 only. Dig samba.domain ANY
returns

;; ANSWER SECTION:

samba.domain.   3600    IN      SOA     dc2.samba. domain. hostmaster.samba.
domain. 1 900 600 86400 3600

samba. domain.   900     IN      NS      dc1.samba. domain.

samba. domain.   900     IN      A       192.168.177.21

 

;; ADDITIONAL SECTION:

dc1.samba. domain. 900   IN      A       192.168.177.21

Same information @DC2 or the local resolver of the network

*       On windows nslookup -type=ANY samba.domain. (note the .)

Server:  netgear.local

Address:  192.168.15.2

 

samba.domain

        primary name server = dc2.samba. domain

        responsible mail addr = hostmaster.samba.domain

        serial  = 1

        refresh = 900 (15 mins)

        retry   = 600 (10 mins)

        expire  = 86400 (1 day)

        default TTL = 3600 (1 hour)

samba. domain nameserver = dc1.samba. domain

samba. domain              internet address = 192.168.177.21

dc1.samba. domain       internet address = 192.168.177.21 

*       windows nslookup -type=ANY samba.domain (without .) looks for
samba.domain.domain. Is this OK or does it point to a problematic search
configuration?

*       When I use the DNS mmc snap-in I can see a host record for dc2. I
can also see a host record for the windows system reflecting the IP address
before the system moved to the other location. I tried to update that, but
got an error message (translated from German) like the database of the
local security authority is internally inconsistent. The snap-in is ultra
slow via VPN, but what makes me more nervous are the to me inconsistent
views on the DNS  nslookup showing DC2, mmc showing DC1 as the NS.

*       In windows management console, only some of the domain
users&principals are shown with the name domain\identity, most of them are
shown S-xxx. With the one use shown domain\user I can logon to the windows
system however (likely with cached credentials, but don´t dare to change
them to confirm)

*       When I try to modify folder permissions on the windows system, I get
a message Unable to contact Active Directory to access or verify claim
types

*       On DC2: kinit Administrator returns kinit: Cannot contact any KDC
for realm samba.domain while getting initial credentials. This one was
easy to fix by adding the domain to /etc/krb5.conf. I am putting this in as
I changed configuration at this point..

*       In an attempt to get Samba return DC2 as a nameserver I tried
samba-tool dns add dc2 samba.domain @ NS dc2.samba.domain.

Password for [Administrator at SAMBA.DOMAIN]:

ERROR(runtime): uncaught exception - (-1073741643, '{Device Timeout} The
specified I/O operation on %hs was not completed before the time-out period
expired.')

  File "/usr/lib/python2.7/dist-packages/samba/netcmd/__init__.py",
line
175, in _run

    return self.run(*args, **kwargs)

  File "/usr/lib/python2.7/dist-packages/samba/netcmd/dns.py", line
1062, in
run

    dns_conn = dns_connect(server, self.lp, self.creds)

  File "/usr/lib/python2.7/dist-packages/samba/netcmd/dns.py", line
40, in
dns_connect

    dns_conn = dnsserver.dnsserver(binding_str, lp, creds)

in another attempt the command produced Record added successfully, but
using dig or nslookup I cannot find it. It is shown in the DNS mmc snap-in
(at least now). Restarting bind did not help.

*       Following
https://wiki.samba.org/index.php/Check_and_fix_DNS_entries_on_DC_joins I
tried 

root at dc2:/etc/bind# samba-tool dns add dc1 samba.domain DC2 A 192.168.15.22
-UAdministrator

Password for [SAMBA\Administrator]:

ERROR: Record already exists

root at dc2:/etc/bind# samba-tool dns add dc2 samba.domain DC2 A 192.168.15.22
-UAdministrator

Password for [SAMBA\Administrator]:

ERROR: Record already exists

root at dc2:/etc/bind# host -t A DC2.samba.domain 

Host DC2.samba.lindenberg.one not found: 3(NXDOMAIN)

              How should I proceed there?



I don´t know how to fix the inconsistent DNS entries and get windows to
work. Please advise.

Thanks, Joachim

Rowland penny

2016-Jun-05 10:48 UTC

head link

[Samba] inconsistent DNS information, windows domain member issues..

On 05/06/16 10:05, Jo wrote:> I joined a Windows 10 Pro system to my (still experimental) domain. The
> windows system actually hosts DC2 as a VM, and another Windows (Server 2008
> R2) at another location hosts DC1 also as a VM. The two locations are
> connected via a VPN, both systems run only when needed. The windows system
> does not directly use DC2 for DNS but instead talks to a DNS resolver that
> delegates the samba Domain to DC2. DC2 uses itself as nameserver.
>
>   
>
> I am observing the following issues that may be related or not:
>
> *       When I do a nslookup samba.domain DC2 I get the address of DC1,
> nslookup DC2.sambadomain DC2 fails. Nslookup DC1.samba.domain DC2 works.
> When I use dig @DC2 samba.domain it returns DC1 only. Dig samba.domain ANY
> returns
>
> ;; ANSWER SECTION:
>
> samba.domain.   3600    IN      SOA     dc2.samba. domain.
hostmaster.samba.
> domain. 1 900 600 86400 3600
>
> samba. domain.   900     IN      NS      dc1.samba. domain.
>
> samba. domain.   900     IN      A       192.168.177.21
>
>   
>
> ;; ADDITIONAL SECTION:
>
> dc1.samba. domain. 900   IN      A       192.168.177.21
>
> Same information @DC2 or the local resolver of the network
>
> *       On windows nslookup -type=ANY samba.domain. (note the .)
>
> Server:  netgear.local
>
> Address:  192.168.15.2
>
>   
>
> samba.domain
>
>          primary name server = dc2.samba. domain
>
>          responsible mail addr = hostmaster.samba.domain
>
>          serial  = 1
>
>          refresh = 900 (15 mins)
>
>          retry   = 600 (10 mins)
>
>          expire  = 86400 (1 day)
>
>          default TTL = 3600 (1 hour)
>
> samba. domain nameserver = dc1.samba. domain
>
> samba. domain              internet address = 192.168.177.21
>
> dc1.samba. domain       internet address = 192.168.177.21
>
> *       windows nslookup -type=ANY samba.domain (without .) looks for
> samba.domain.domain. Is this OK or does it point to a problematic search
> configuration?
>
> *       When I use the DNS mmc snap-in I can see a host record for dc2. I
> can also see a host record for the windows system reflecting the IP address
> before the system moved to the other location. I tried to update that, but
> got an error message (translated from German) like the database of the
> local security authority is internally inconsistent. The snap-in is ultra
> slow via VPN, but what makes me more nervous are the to me inconsistent
> views on the DNS  nslookup showing DC2, mmc showing DC1 as the NS.
>
> *       In windows management console, only some of the domain
> users&principals are shown with the name domain\identity, most of them
are
> shown S-xxx. With the one use shown domain\user I can logon to the windows
> system however (likely with cached credentials, but don´t dare to change
> them to confirm)
>
> *       When I try to modify folder permissions on the windows system, I
get
> a message Unable to contact Active Directory to access or verify claim
> types
>
> *       On DC2: kinit Administrator returns kinit: Cannot contact any KDC
> for realm samba.domain while getting initial credentials. This one was
> easy to fix by adding the domain to /etc/krb5.conf. I am putting this in as
> I changed configuration at this point..
>
> *       In an attempt to get Samba return DC2 as a nameserver I tried
> samba-tool dns add dc2 samba.domain @ NS dc2.samba.domain.
>
> Password for [Administrator at SAMBA.DOMAIN]:
>
> ERROR(runtime): uncaught exception - (-1073741643, '{Device Timeout}
The
> specified I/O operation on %hs was not completed before the time-out period
> expired.')
>
>    File
"/usr/lib/python2.7/dist-packages/samba/netcmd/__init__.py", line
> 175, in _run
>
>      return self.run(*args, **kwargs)
>
>    File "/usr/lib/python2.7/dist-packages/samba/netcmd/dns.py",
line 1062, in
> run
>
>      dns_conn = dns_connect(server, self.lp, self.creds)
>
>    File "/usr/lib/python2.7/dist-packages/samba/netcmd/dns.py",
line 40, in
> dns_connect
>
>      dns_conn = dnsserver.dnsserver(binding_str, lp, creds)
>
> in another attempt the command produced Record added successfully, but
> using dig or nslookup I cannot find it. It is shown in the DNS mmc snap-in
> (at least now). Restarting bind did not help.
>
> *       Following
> https://wiki.samba.org/index.php/Check_and_fix_DNS_entries_on_DC_joins I
> tried
>
> root at dc2:/etc/bind# samba-tool dns add dc1 samba.domain DC2 A
192.168.15.22
> -UAdministrator
>
> Password for [SAMBA\Administrator]:
>
> ERROR: Record already exists
>
> root at dc2:/etc/bind# samba-tool dns add dc2 samba.domain DC2 A
192.168.15.22
> -UAdministrator
>
> Password for [SAMBA\Administrator]:
>
> ERROR: Record already exists
>
> root at dc2:/etc/bind# host -t A DC2.samba.domain
>
> Host DC2.samba.lindenberg.one not found: 3(NXDOMAIN)
>
>                How should I proceed there?
>
>
>
> I don´t know how to fix the inconsistent DNS entries and get windows to
> work. Please advise.
>
> Thanks, Joachim
>
Is bind9 running on the DCs ? and if so, are you using bind_dlz ?

Your DCs really need to be running at all times, so that replication can 
work properly, also each DC should use the other for their DNS server, 
anything unknown to the DNS servers on the DCs should be forwarded to an 
external DNS that does know or can find out.

Can you please post  /etc/resolv.conf, /etc/hosts and /etc/krb5.conf 
from each DC, can you also post the smb.conf file from each DC.

Rowland

2016-Jun-05 12:43 UTC

head link

[Samba] inconsistent DNS information, windows domain member issues..

> -----Ursprüngliche Nachricht-----
> Von: samba [mailto:samba-bounces at lists.samba.org] Im Auftrag von
> Rowland penny
> Gesendet: Sonntag, 5. Juni 2016 12:49
> An: samba at lists.samba.org
> Betreff: Re: [Samba] inconsistent DNS information, windows domain
> member issues..
> 
> On 05/06/16 10:05, Jo wrote:
> > I joined a Windows 10 Pro system to my (still experimental) domain.
> > The windows system actually hosts DC2 as a VM, and another Windows
> > (Server 2008
> > R2) at another location hosts DC1 also as a VM. The two locations are
> > connected via a VPN, both systems run only when needed. The windows
> > system does not directly use DC2 for DNS but instead talks to a DNS
> > resolver that delegates the samba Domain to DC2. DC2 uses itself as
> nameserver.
> >
> >
> >
> > I am observing the following issues that may be related or not:
> >
> > *       When I do a nslookup samba.domain DC2 I get the address of
DC1,
> > nslookup DC2.sambadomain DC2 fails. Nslookup DC1.samba.domain DC2
> works.
> > When I use dig @DC2 samba.domain it returns DC1 only. Dig
> samba.domain
> > ANY returns
> >
> > ;; ANSWER SECTION:
> >
> > samba.domain.   3600    IN      SOA     dc2.samba. domain.
> hostmaster.samba.
> > domain. 1 900 600 86400 3600
> >
> > samba. domain.   900     IN      NS      dc1.samba. domain.
> >
> > samba. domain.   900     IN      A       192.168.177.21
> >
> >
> >
> > ;; ADDITIONAL SECTION:
> >
> > dc1.samba. domain. 900   IN      A       192.168.177.21
> >
> > Same information @DC2 or the local resolver of the network
> >
> > *       On windows nslookup -type=ANY samba.domain. (note the .)
> >
> > Server:  netgear.local
> >
> > Address:  192.168.15.2
> >
> >
> >
> > samba.domain
> >
> >          primary name server = dc2.samba. domain
> >
> >          responsible mail addr = hostmaster.samba.domain
> >
> >          serial  = 1
> >
> >          refresh = 900 (15 mins)
> >
> >          retry   = 600 (10 mins)
> >
> >          expire  = 86400 (1 day)
> >
> >          default TTL = 3600 (1 hour)
> >
> > samba. domain nameserver = dc1.samba. domain
> >
> > samba. domain              internet address = 192.168.177.21
> >
> > dc1.samba. domain       internet address = 192.168.177.21
> >
> > *       windows nslookup -type=ANY samba.domain (without .) looks for
> > samba.domain.domain. Is this OK or does it point to a problematic
> > search configuration?
> >
> > *       When I use the DNS mmc snap-in I can see a host record for
dc2. I
> > can also see a host record for the windows system reflecting the IP
> > address before the system moved to the other location. I tried to
> > update that, but got an error message (translated from German) like
> > “the database of the local security authority is internally
> > inconsistent”. The snap-in is ultra slow via VPN, but what makes me
> > more nervous are the to me inconsistent views on the DNS – nslookup
> showing DC2, mmc showing DC1 as the NS.
> >
> > *       In windows management console, only some of the domain
> > users&principals are shown with the name domain\identity, most of
them
> > are shown S-xxx. With the one use shown domain\user I can logon to the
> > windows system however (likely with cached credentials, but don´t dare
> > to change them to confirm)
> >
> > *       When I try to modify folder permissions on the windows system,
I get
> > a message “Unable to contact Active Directory to access or verify
> > claim types”
> >
> > *       On DC2: kinit Administrator returns “kinit: Cannot contact any
KDC
> > for realm ‘samba.domain’ while getting initial credentials. This one
> > was easy to fix by adding the domain to /etc/krb5.conf. I am putting
> > this in as I changed configuration at this point..
> >
> > *       In an attempt to get Samba return DC2 as a nameserver I tried
> > samba-tool dns add dc2 samba.domain @ NS dc2.samba.domain.
> >
> > Password for [Administrator at SAMBA.DOMAIN]:
> >
> > ERROR(runtime): uncaught exception - (-1073741643, '{Device
Timeout}
> > The specified I/O operation on %hs was not completed before the
> > time-out period
> > expired.')
> >
> >    File
"/usr/lib/python2.7/dist-packages/samba/netcmd/__init__.py",
> > line 175, in _run
> >
> >      return self.run(*args, **kwargs)
> >
> >    File
"/usr/lib/python2.7/dist-packages/samba/netcmd/dns.py", line
> > 1062, in run
> >
> >      dns_conn = dns_connect(server, self.lp, self.creds)
> >
> >    File
"/usr/lib/python2.7/dist-packages/samba/netcmd/dns.py", line
> > 40, in dns_connect
> >
> >      dns_conn = dnsserver.dnsserver(binding_str, lp, creds)
> >
> > in another attempt the command produced “Record added successfully”,
> > but using dig or nslookup I cannot find it. It is shown in the DNS mmc
> > snap-in (at least now). Restarting bind did not help.
> >
> > *       Following
> >
> https://wiki.samba.org/index.php/Check_and_fix_DNS_entries_on_DC_joins
> > I tried
> >
> > root at dc2:/etc/bind# samba-tool dns add dc1 samba.domain DC2 A
> > 192.168.15.22 -UAdministrator
> >
> > Password for [SAMBA\Administrator]:
> >
> > ERROR: Record already exists
> >
> > root at dc2:/etc/bind# samba-tool dns add dc2 samba.domain DC2 A
> > 192.168.15.22 -UAdministrator
> >
> > Password for [SAMBA\Administrator]:
> >
> > ERROR: Record already exists
> >
> > root at dc2:/etc/bind# host -t A DC2.samba.domain
> >
> > Host DC2.samba.lindenberg.one not found: 3(NXDOMAIN)
> >
> >                How should I proceed there?
> >
> >
> >
> > I don´t know how to fix the inconsistent DNS entries and get windows
> > to work. Please advise.
> >
> > Thanks, Joachim
> >
> 
> Is bind9 running on the DCs ? and if so, are you using bind_dlz ?

Yes and yes.
> 
> Your DCs really need to be running at all times, so that replication can
work
> properly, also each DC should use the other for their DNS server, anything
> unknown to the DNS servers on the DCs should be forwarded to an external
> DNS that does know or can find out.
I understand that they need to be up simultaneously for replication, but
otherwise that should not be the case. Or why? Imho the point of redundancy is
that you can tolerate failure. In fact I would like to run this on two bananas
but haven´t found a usable distribution so far that offers recent versions of
Samba (and supports encryption at least of the relevant data). Running the
windows hosts all the time is not an option due to noise, energy consumption,
etc.

The point of whether the DC should use the respective other DC for DNS is
obviously debated here. The DCs do have an upstream forwarder configured in
bind.
> 
> Can you please post  /etc/resolv.conf, /etc/hosts and /etc/krb5.conf from
> each DC, can you also post the smb.conf file from each DC.
> 
joachim at dc1:~$ cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 192.168.177.21
search samba.domain
joachim at dc1:~$ cat /etc/hosts
127.0.0.1       localhost
192.168.177.21  dc1 dc1.samba.domain
192.168.15.22   dc2 dc2.samba.domain

# The following lines are desirable for IPv6 capable hosts
#::1     localhost ip6-localhost ip6-loopback
#ff02::1 ip6-allnodes
#ff02::2 ip6-allrouters
joachim at dc1:~$ cat /etc/krb5.conf
[libdefaults]
        default_realm = SAMBA.DOMAIN

# The following krb5.conf variables are only for MIT Kerberos.
        krb4_config = /etc/krb.conf
        krb4_realms = /etc/krb.realms
        kdc_timesync = 1
        ccache_type = 4
        forwardable = true
        proxiable = true

# The following encryption type specification will be used by MIT Kerberos
# if uncommented.  In general, the defaults in the MIT Kerberos code are
# correct and overriding these specifications only serves to disable new
# encryption types as they are added, creating interoperability problems.
#
# Thie only time when you might need to uncomment these lines and change
# the enctypes is if you have local software that will break on ticket
# caches containing ticket encryption types it doesn't know about (such as
# old versions of Sun Java).

#       default_tgs_enctypes = des3-hmac-sha1
#       default_tkt_enctypes = des3-hmac-sha1
#       permitted_enctypes = des3-hmac-sha1

# The following libdefaults parameters are only for Heimdal Kerberos.
        v4_instance_resolve = false
        v4_name_convert = {
                host = {
                        rcmd = host
                        ftp = ftp
                }
                plain = {
                        something = something-else
                }
        }
        fcc-mit-ticketflags = true

[realms]
        ATHENA.MIT.EDU = {
                kdc = kerberos.mit.edu:88
                kdc = kerberos-1.mit.edu:88
                kdc = kerberos-2.mit.edu:88
                admin_server = kerberos.mit.edu
                default_domain = mit.edu
        }
        MEDIA-LAB.MIT.EDU = {
                kdc = kerberos.media.mit.edu
                admin_server = kerberos.media.mit.edu
        }
        ZONE.MIT.EDU = {
                kdc = casio.mit.edu
                kdc = seiko.mit.edu
                admin_server = casio.mit.edu
        }
        MOOF.MIT.EDU = {
                kdc = three-headed-dogcow.mit.edu:88
                kdc = three-headed-dogcow-1.mit.edu:88
                admin_server = three-headed-dogcow.mit.edu
        }
        CSAIL.MIT.EDU = {
                kdc = kerberos-1.csail.mit.edu
                kdc = kerberos-2.csail.mit.edu
                admin_server = kerberos.csail.mit.edu
                default_domain = csail.mit.edu
                krb524_server = krb524.csail.mit.edu
        }
        IHTFP.ORG = {
                kdc = kerberos.ihtfp.org
                admin_server = kerberos.ihtfp.org
        }
        GNU.ORG = {
                kdc = kerberos.gnu.org
                kdc = kerberos-2.gnu.org
                kdc = kerberos-3.gnu.org
                admin_server = kerberos.gnu.org
        }
        1TS.ORG = {
                kdc = kerberos.1ts.org
                admin_server = kerberos.1ts.org
        }
        GRATUITOUS.ORG = {
                kdc = kerberos.gratuitous.org
                admin_server = kerberos.gratuitous.org
        }
        DOOMCOM.ORG = {
                kdc = kerberos.doomcom.org
                admin_server = kerberos.doomcom.org
        }
        ANDREW.CMU.EDU = {
                kdc = kerberos.andrew.cmu.edu
                kdc = kerberos2.andrew.cmu.edu
                kdc = kerberos3.andrew.cmu.edu
                admin_server = kerberos.andrew.cmu.edu
                default_domain = andrew.cmu.edu
        }
        CS.CMU.EDU = {
                kdc = kerberos.cs.cmu.edu
                kdc = kerberos-2.srv.cs.cmu.edu
                admin_server = kerberos.cs.cmu.edu
        }
        DEMENTIA.ORG = {
                kdc = kerberos.dementix.org
                kdc = kerberos2.dementix.org
                admin_server = kerberos.dementix.org
        }
        stanford.edu = {
                kdc = krb5auth1.stanford.edu
                kdc = krb5auth2.stanford.edu
                kdc = krb5auth3.stanford.edu
                master_kdc = krb5auth1.stanford.edu
                admin_server = krb5-admin.stanford.edu
                default_domain = stanford.edu
        }
        UTORONTO.CA = {
                kdc = kerberos1.utoronto.ca
                kdc = kerberos2.utoronto.ca
                kdc = kerberos3.utoronto.ca
                admin_server = kerberos1.utoronto.ca
                default_domain = utoronto.ca
        }

[domain_realm]
        .mit.edu = ATHENA.MIT.EDU
        mit.edu = ATHENA.MIT.EDU
        .media.mit.edu = MEDIA-LAB.MIT.EDU
        media.mit.edu = MEDIA-LAB.MIT.EDU
        .csail.mit.edu = CSAIL.MIT.EDU
        csail.mit.edu = CSAIL.MIT.EDU
        .whoi.edu = ATHENA.MIT.EDU
        whoi.edu = ATHENA.MIT.EDU
        .stanford.edu = stanford.edu
        .slac.stanford.edu = SLAC.STANFORD.EDU
        .toronto.edu = UTORONTO.CA
        .utoronto.ca = UTORONTO.CA

[login]
        krb4_convert = true
        krb4_get_tickets = false
joachim at dc1:~$ cat /etc/samba/smb.conf
# Global parameters
[global]
        workgroup = SAMBA
        realm = SAMBA.DOMAIN
        netbios name = DC1
        server role = active directory domain controller
        server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl,
winbindd, ntp_signd, kcc, dnsupdate
        idmap_ldb:use rfc2307 = yes

[netlogon]
        path = /var/lib/samba/sysvol/samba.domain/scripts
        read only = No

[sysvol]
        path = /var/lib/samba/sysvol
        read only = No
joachim at dc1:~$

I detected that in krb5.conf the real was missing and added that now. Not sure
whether this changes something.

joachim at dc2:~$ cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 192.168.15.22
search samba.domain

joachim at dc2:~$ cat /etc/hosts
127.0.0.1       localhost
192.168.15.22   dc2 dc2.samba.domain
192.168.177.21  dc1 dc1.samba.domain

joachim at dc2:~$ cat /etc/krb5.conf
[libdefaults]
        default_realm = SAMBA.DOMAIN

# The following krb5.conf variables are only for MIT Kerberos.
        krb4_config = /etc/krb.conf
        krb4_realms = /etc/krb.realms
        kdc_timesync = 1
        ccache_type = 4
        forwardable = true
        proxiable = true

# The following encryption type specification will be used by MIT Kerberos
# if uncommented.  In general, the defaults in the MIT Kerberos code are
# correct and overriding these specifications only serves to disable new
# encryption types as they are added, creating interoperability problems.
#
# Thie only time when you might need to uncomment these lines and change
# the enctypes is if you have local software that will break on ticket
# caches containing ticket encryption types it doesn't know about (such as
# old versions of Sun Java).

#       default_tgs_enctypes = des3-hmac-sha1
#       default_tkt_enctypes = des3-hmac-sha1
#       permitted_enctypes = des3-hmac-sha1

# The following libdefaults parameters are only for Heimdal Kerberos.
        v4_instance_resolve = false
        v4_name_convert = {
                host = {
                        rcmd = host
                        ftp = ftp
                }
                plain = {
                        something = something-else
                }
        }
        fcc-mit-ticketflags = true

[realms]
        SAMBA.domain = {
                kdc = dc2.samba.domain:88
                kdc = dc1.samba.domain:88
                admin_server = dc1.samba.domain
        }
        ATHENA.MIT.EDU = {
                kdc = kerberos.mit.edu:88
                kdc = kerberos-1.mit.edu:88
                kdc = kerberos-2.mit.edu:88
                admin_server = kerberos.mit.edu
                default_domain = mit.edu
        }
        MEDIA-LAB.MIT.EDU = {
                kdc = kerberos.media.mit.edu
                admin_server = kerberos.media.mit.edu
        }
        ZONE.MIT.EDU = {
                kdc = casio.mit.edu
                kdc = seiko.mit.edu
                admin_server = casio.mit.edu
        }
        MOOF.MIT.EDU = {
                kdc = three-headed-dogcow.mit.edu:88
                kdc = three-headed-dogcow-1.mit.edu:88
                admin_server = three-headed-dogcow.mit.edu
        }
        CSAIL.MIT.EDU = {
                kdc = kerberos-1.csail.mit.edu
                kdc = kerberos-2.csail.mit.edu
                admin_server = kerberos.csail.mit.edu
                default_domain = csail.mit.edu
                krb524_server = krb524.csail.mit.edu
        }
        IHTFP.ORG = {
                kdc = kerberos.ihtfp.org
                admin_server = kerberos.ihtfp.org
        }
        GNU.ORG = {
                kdc = kerberos.gnu.org
                kdc = kerberos-2.gnu.org
                kdc = kerberos-3.gnu.org
                admin_server = kerberos.gnu.org
        }
        1TS.ORG = {
                kdc = kerberos.1ts.org
                admin_server = kerberos.1ts.org
        }
        GRATUITOUS.ORG = {
                kdc = kerberos.gratuitous.org
                admin_server = kerberos.gratuitous.org
        }
        DOOMCOM.ORG = {
                kdc = kerberos.doomcom.org
                admin_server = kerberos.doomcom.org
        }
        ANDREW.CMU.EDU = {
                kdc = kerberos.andrew.cmu.edu
                kdc = kerberos2.andrew.cmu.edu
                kdc = kerberos3.andrew.cmu.edu
                admin_server = kerberos.andrew.cmu.edu
                default_domain = andrew.cmu.edu
        }
        CS.CMU.EDU = {
                kdc = kerberos.cs.cmu.edu
                kdc = kerberos-2.srv.cs.cmu.edu
                admin_server = kerberos.cs.cmu.edu
        }
        DEMENTIA.ORG = {
                kdc = kerberos.dementix.org
                kdc = kerberos2.dementix.org
                admin_server = kerberos.dementix.org
        }
        stanford.edu = {
                kdc = krb5auth1.stanford.edu
                kdc = krb5auth2.stanford.edu
                kdc = krb5auth3.stanford.edu
                master_kdc = krb5auth1.stanford.edu
                admin_server = krb5-admin.stanford.edu
                default_domain = stanford.edu
        }
        UTORONTO.CA = {
                kdc = kerberos1.utoronto.ca
                kdc = kerberos2.utoronto.ca
                kdc = kerberos3.utoronto.ca
                admin_server = kerberos1.utoronto.ca
                default_domain = utoronto.ca
        }

[domain_realm]
        .mit.edu = ATHENA.MIT.EDU
        mit.edu = ATHENA.MIT.EDU
        .media.mit.edu = MEDIA-LAB.MIT.EDU
        media.mit.edu = MEDIA-LAB.MIT.EDU
        .csail.mit.edu = CSAIL.MIT.EDU
        csail.mit.edu = CSAIL.MIT.EDU
        .whoi.edu = ATHENA.MIT.EDU
        whoi.edu = ATHENA.MIT.EDU
        .stanford.edu = stanford.edu
        .slac.stanford.edu = SLAC.STANFORD.EDU
        .toronto.edu = UTORONTO.CA
        .utoronto.ca = UTORONTO.CA

[login]
        krb4_convert = true
        krb4_get_tickets = false
joachim at dc2:~$ cat /etc/samba/smb.conf
# Global parameters
[global]
        workgroup = SAMBA
        realm = samba.domain
        netbios name = DC2
        server role = active directory domain controller
        server services = rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbindd,
ntp_signd, kcc, dnsupdate, smb
        dcerpc endpoint servers = epmapper, wkssvc, rpcecho, samr, netlogon,
lsarpc, spoolss, drsuapi, dssetup, unixinfo, browser, eventlog6, backupkey,
dnsserver, winreg, srvsvc

[netlogon]
        path = /var/lib/samba/sysvol/samba.domain/scripts
        read only = No

[sysvol]
        path = /var/lib/samba/sysvol
        read only = No
joachim at dc2:~$

One new piece of mosaic: 

root at dc2:/home/joachim# tail /var/log/samba/log.samba
[2016/06/05 14:28:12.674356,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
[2016/06/05 14:28:12.697076,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
[2016/06/05 14:28:12.719968,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
[2016/06/05 14:28:12.743569,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
[2016/06/05 14:28:12.756246,  0]
../source4/dsdb/dns/dns_update.c:294(dnsupdate_nameupdate_done)
  ../source4/dsdb/dns/dns_update.c:294: Failed DNS update -
NT_STATUS_UNSUCCESSFUL
root at dc2:/home/joachim#

I tried to follow
https://wiki.samba.org/index.php/Dns_tkey_negotiategss:_TKEY_is_unacceptable,
but may be that is outdated? I found a keytab file at
/var/lib/samba/private/secrets.keytab and it contains what is described on the
wiki page:

root at dc2:/home/joachim# klist -k /var/lib/samba/private/secrets.keytab
Keytab name: FILE:/var/lib/samba/private/secrets.keytab
KVNO Principal
---- --------------------------------------------------------------------------
   1 HOST/dc2 at SAMBA.DOMAIN
   1 HOST/dc2.samba.domain at SAMBA.DOMAIN
   1 DC2$@SAMBA.DOMAIN
   1 HOST/dc2 at SAMBA.DOMAIN
   1 HOST/dc2.samba.domain at SAMBA.DOMAIN
   1 DC2$@SAMBA.DOMAIN
   1 HOST/dc2 at SAMBA.DOMAIN
   1 HOST/dc2.samba.domain at SAMBA.DOMAIN
   1 DC2$@SAMBA.DOMAIN
   1 HOST/dc2 at SAMBA.DOMAIN
   1 HOST/dc2.samba.domain at SAMBA.DOMAIN
   1 DC2$@SAMBA.DOMAIN
   1 HOST/dc2 at SAMBA.DOMAIN
   1 HOST/dc2.samba.domain at SAMBA.DOMAIN
   1 DC2$@SAMBA.DOMAIN

Do I have to update some configuration path to point to that file? Create a
link? Or what else to check?

Thanks, Joachim
> Rowland
> 
> 
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba

Reasonably Related Threads

Search for more apparently analagous threads

samba - Jun 2016 - inconsistent DNS information, windows domain member issues..

[Samba] inconsistent DNS information, windows domain member issues..

[Samba] inconsistent DNS information, windows domain member issues..

[Samba] inconsistent DNS information, windows domain member issues..

Reasonably Related Threads