thr3ads.net - samba - [Samba] Use Samba with ACL for read Active Directory and set Permissions via it. [Jan 2015]

If this information is useful, please help other people find it:
Share via:

Jason Long

2015-Jan-03 15:08 UTC

[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.

Thank you.
I used below videos for join my Linux Box to Windows domain :

http://www.youtube.com/watch?v=Y3TFPDT9uic

Please look at this video and I used instructions in it and LikeWiseOpen tool.


Cheers. 



On Saturday, January 3, 2015 5:45 AM, Rowland Penny <rowlandpenny at
googlemail.com> wrote:
On 03/01/15 12:38, Jason Long wrote:> Thanks.
>
> I enter "net ads testjoin" and it show me :
>
> ads_connect: No logon servers
> Join to domain is not valid: No logon servers
You are *not* joined to the domain, I suppose this should have been 
asked earlier, but how did you do the domain join ?

Rowland


>
> If it is incorrect, Why I can Login to Linux via Windows account? As you
see, I followed the steps on Video.
>
> :(.
>
>
>
> On Saturday, January 3, 2015 1:13 AM, Rowland Penny <rowlandpenny at
googlemail.com> wrote:
> On 03/01/15 05:41, Jason Long wrote:
>> Thank you.
>> Command show below error :
>>
>> Could not connect to server 192.168.1.1
>> Connection failed: NT_STATUS_INVALID_WORKSTATION
>>
>> :(
>>
>>
>>
>> On Wednesday, December 31, 2014 2:05 AM, Rowland Penny <rowlandpenny
at googlemail.com> wrote:
>> On 31/12/14 09:55, Jason Long wrote:
>>> Thanks.
>>> I changed the command as below :
>>>
>>> #net rpc rights grant 'jasondomain\Domain Admins'
SeDiskOperatorPrivilege -U jasondomain\\administrator -I 192.168.1.1
>>>
>>> But Got below error :
>>>
>>> Could not connect to server 192.168.1.1
>>> Connection failed: NT_STATUS_INVALID_WORKSTATION
>>>
>>> Cheers.
>>>
>>>
>>>
>>>
>>>
>>> On Wednesday, December 31, 2014 1:35 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>> On 31/12/14 09:17, Jason Long wrote:
>>>> Thank you so much but I run below commands on linux :
>>>>
>>>>
>>>> # net rpc rights grant 'jasondomain\Domain Admins'
SeDiskOperatorPrivilege -Uadministrator
>>>> # net rpc rights list accounts -Uadministrator
>>>>
>>>> it ask me a password for "administrator:
>>>>
>>>> Enter administrator's password:
>>>> Could not connect to server 127.0.0.1
>>>> Connection failed: NT_STATUS_NO_LOGON_SERVERS
>>>>
>>>> Must I enter windows administrator password?
>>>>
>>>>
>>>> Thanks.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Monday, December 29, 2014 5:10 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>>> On 29/12/14 12:52, Jason Long wrote:
>>>>> Thank you so much.
>>>>>
>>>>> I did some changes like below :
>>>>>
>>>>> /dev/mapper/vg_print-lv_root /                       ext4  
user_xattr,acl,defaults        1 1
>>>>>
>>>>>
>>>>> Then "lsof | grep /dev/mapper/vg_print-lv_root"
not have any output.
>>>>> I added below lines to [global] section too :
>>>>>
>>>>> vfs objects = acl_xattr
>>>>> map acl inherit = Yes
>>>>> store dos attributes = Yes
>>>>>
>>>>> But about below commands can you tell me more?
>>>>>
>>>>> net rpc rights grant 'SAMDOM\Domain Admins'
SeDiskOperatorPrivilege -Uadministrator
>>>>> net rpc rights list accounts -Uadministrator
>>>>>
>>>>> I hope they are not Dangerous!!!!
>>>> No :-)
>>>>
>>>> The first one gives members of Domain Admins the right to
change windows
>>>> ACL's on a share
>>>> The second list accounts and what rights they have.
>>>>
>>>>> In the
"https://wiki.samba.org/index.php/Setup_and_configure_file_shares_with_Windows_ACLs"
, the other steps are in Windows!!! Can I doing via Linux too?
>>>>>    
>>>> Yes, but it is just easier via windows
>>>>
>>>> Rowland
>>>>
>>>>
>>>>>  
>>>>> Thanks.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Monday, December 29, 2014 1:59 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>>>> On 29/12/14 06:38, Jason Long wrote:
>>>>>> Thank you so much.
>>>>>> You right, My realm is
"jasondomaini.jasondomain.jj"  and I change configure as below :
>>>>>>
>>>>>>
>>>>>> [global]
>>>>>> workgroup = JASONDOMAINI
>>>>>> server string = Samba Server Version %v
>>>>>> # logs split per machine
>>>>>> log file = /var/log/samba/log.%m
>>>>>> # max 50KB per log file, then rotate
>>>>>> max log size = 50
>>>>>> security = ADS
>>>>>> realm = JASONDOMAINI.JASONDOMAIN.JJ
>>>>>> passdb backend = tdbsam
>>>>>> load printers = yes
>>>>>> cups options = raw
>>>>>> idmap config *:backend = tdb
>>>>>> idmap config *:range = 70001-80000
>>>>>> #idmap config SAMDOM:backend = ad
>>>>>> idmap config JASONDOMAINI:backend = ad
>>>>>> idmap config JASONDOMAINI:schema_mode = rfc2307
>>>>>> idmap config JASONDOMAINI:range = 500-40000
>>>>>>
>>>>>>
>>>>>>
>>>>>> When I use "SSH" on my CentOS and enter
"jasondomain\jason", It show me the root partition and I can open
"Test" directory But it has two problems :
>>>>>>
>>>>>> 1- Why it show root partition?
>>>>>> 2- I can't browse it via Windows explorer!!!
>>>>>>
>>>>>> I want to know use AD users in Linux is Hard?
>>>>>>
>>>>>> In your opinion I used a correct command to set ACL?
>>>>>>
>>>>>> #getfacl test/
>>>>>>
>>>>>>
>>>>>> # file: test/
>>>>>> # owner: JASONDOMAINI\134JASON
>>>>>> # group: JASONDOMAINI\134grp-JASON-rw
>>>>>> user::rwx
>>>>>> group::r-x
>>>>>> group:JASONDOMAINI\134grp-JASON-rw:rwx
>>>>>> mask::rwx
>>>>>> other::r-x
>>>>>>
>>>>>>
>>>>>> and in "getent group" it show me below group
:
>>>>>>
>>>>>> JASONDOMAINI\134grp-JASON-rw
>>>>>>
>>>>>>
>>>>>> in your idea, Am I use correct command to set
permission?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sunday, December 28, 2014 9:37 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>>>>> On 28/12/14 15:48, Jason Long wrote:
>>>>>>> Thank you so much.
>>>>>>> Thus I must change "idmap config
JASONDOMAIN.JJ:backend = ad " to "idmap config JASONDOMAIN:backend =
ad".
>>>>>>> How about Workgroup? is must change
"JASONDOMAIN" too?
>>>>>>> About your question I must say that I Test this
share via Linux too and Windows and Linux has same problem.
>>>>>>>
>>>>>>> About "What I would do is, install the OpenSSH
server on the linux machine, install 'PUTTY' on a windows machine and
try to login via 'PUTTY' and use the SSH protocol." , You mean is
that Windows clients use SSH to work with this directory? I want to made this
Linux Box as a File server and Windows Clients need graphical browser to copy
and paste file into this directory!!!!!!!
>>>>>>> What is your idea?
>>>>>>>
>>>>>>> Thanks.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> I am loosing track here a bit, but if your dns domain
is example.com,
>>>>>> then your windows AD realm should be something like
internal.example.com
>>>>>> and your workgroup/domain name should be INTERNAL, that
is, they all
>>>>>> rely on each other.
>>>>>>
>>>>>> So anywhere that you come across these, you should use
the relevant one,
>>>>>> this is the relevant parts from a Unix client on my
domain:
>>>>>>
>>>>>> [global]
>>>>>>                workgroup = INTERNAL
>>>>>>                security = ADS
>>>>>>                realm = INTERNAL.EXAMPLE.COM
>>>>>>                ..........
>>>>>>                idmap config * : backend = tdb
>>>>>>                idmap config * : range = 2000-9999
>>>>>>                idmap config INTERNAL : backend  = ad
>>>>>>                idmap config INTERNAL : range =
10000-999999
>>>>>>                idmap config INTERNAL : schema_mode =
rfc2307
>>>>>>
>>>>>> As for using 'PUTTY', this was just a way of
testing whether you can
>>>>>> connect to the Unix machine.
>>>>>>
>>>>>>
>>>>>> Rowland
>>>>> OK, we are getting closer
>>>>>
>>>>> right, answers to your questions
>>>>> 1) I think that you may find that this is also printed
'Could not chdir
>>>>> to home directory', in which case you will end up in
the root of computer.
>>>>>
>>>>> 2) Are you running the 'nmbd' daemon ? Even if this
is not running you
>>>>> should be able to navigate to the share by entering the
path. Have a
>>>>> look here:
>>>>>
>>>>>
https://wiki.samba.org/index.php/Setup_and_configure_file_shares_with_Windows_ACLs
>>>>>
>>>>>
>>>>> Rowland
>>>>>
>>> You are trying to run the command on a client, try adding either:
>>>
>>> -S server name
>>>
>>> OR
>>>
>>> -I address of target server
>>>
>>> where 'server' is the AD DC.
>>>
>>> Yes, you need to supply the password of the Domain Administrator.
>>>
>>>
>>> Rowland
>>>
>> OK, try it like this:
>>
>> net rpc rights grant 'Domain Admins' SeDiskOperatorPrivilege
>> -UAdministrator -I 192.168.1.1
>>
>> This works for me on a client joined to the domain.
>>
>>
>> Rowland
>>
> Sounds like something is wrong with the join, what does 'net ads
> testjoin' return ? You may have to run this command with sudo.
>
>
> Rowland
>

Rowland Penny

2015-Jan-03 15:43 UTC

head link

[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.

On 03/01/15 15:08, Jason Long wrote:> Thank you.
> I used below videos for join my Linux Box to Windows domain :
>
> http://www.youtube.com/watch?v=Y3TFPDT9uic
>
> Please look at this video and I used instructions in it and LikeWiseOpen
tool.
>
>
> Cheers.
>
>
>
> On Saturday, January 3, 2015 5:45 AM, Rowland Penny <rowlandpenny at
googlemail.com> wrote:
> On 03/01/15 12:38, Jason Long wrote:
>> Thanks.
>>
>> I enter "net ads testjoin" and it show me :
>>
>> ads_connect: No logon servers
>> Join to domain is not valid: No logon servers
> You are *not* joined to the domain, I suppose this should have been
> asked earlier, but how did you do the domain join ?
>
> Rowland
>
>
>
>> If it is incorrect, Why I can Login to Linux via Windows account? As
you see, I followed the steps on Video.
>>
>> :(.
>>
>>
>>
>> On Saturday, January 3, 2015 1:13 AM, Rowland Penny <rowlandpenny at
googlemail.com> wrote:
>> On 03/01/15 05:41, Jason Long wrote:
>>> Thank you.
>>> Command show below error :
>>>
>>> Could not connect to server 192.168.1.1
>>> Connection failed: NT_STATUS_INVALID_WORKSTATION
>>>
>>> :(
>>>
>>>
>>>
>>> On Wednesday, December 31, 2014 2:05 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>> On 31/12/14 09:55, Jason Long wrote:
>>>> Thanks.
>>>> I changed the command as below :
>>>>
>>>> #net rpc rights grant 'jasondomain\Domain Admins'
SeDiskOperatorPrivilege -U jasondomain\\administrator -I 192.168.1.1
>>>>
>>>> But Got below error :
>>>>
>>>> Could not connect to server 192.168.1.1
>>>> Connection failed: NT_STATUS_INVALID_WORKSTATION
>>>>
>>>> Cheers.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Wednesday, December 31, 2014 1:35 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>>> On 31/12/14 09:17, Jason Long wrote:
>>>>> Thank you so much but I run below commands on linux :
>>>>>
>>>>>
>>>>> # net rpc rights grant 'jasondomain\Domain Admins'
SeDiskOperatorPrivilege -Uadministrator
>>>>> # net rpc rights list accounts -Uadministrator
>>>>>
>>>>> it ask me a password for "administrator:
>>>>>
>>>>> Enter administrator's password:
>>>>> Could not connect to server 127.0.0.1
>>>>> Connection failed: NT_STATUS_NO_LOGON_SERVERS
>>>>>
>>>>> Must I enter windows administrator password?
>>>>>
>>>>>
>>>>> Thanks.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Monday, December 29, 2014 5:10 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>>>> On 29/12/14 12:52, Jason Long wrote:
>>>>>> Thank you so much.
>>>>>>
>>>>>> I did some changes like below :
>>>>>>
>>>>>> /dev/mapper/vg_print-lv_root /                      
ext4    user_xattr,acl,defaults        1 1
>>>>>>
>>>>>>
>>>>>> Then "lsof | grep
/dev/mapper/vg_print-lv_root" not have any output.
>>>>>> I added below lines to [global] section too :
>>>>>>
>>>>>> vfs objects = acl_xattr
>>>>>> map acl inherit = Yes
>>>>>> store dos attributes = Yes
>>>>>>
>>>>>> But about below commands can you tell me more?
>>>>>>
>>>>>> net rpc rights grant 'SAMDOM\Domain Admins'
SeDiskOperatorPrivilege -Uadministrator
>>>>>> net rpc rights list accounts -Uadministrator
>>>>>>
>>>>>> I hope they are not Dangerous!!!!
>>>>> No :-)
>>>>>
>>>>> The first one gives members of Domain Admins the right to
change windows
>>>>> ACL's on a share
>>>>> The second list accounts and what rights they have.
>>>>>
>>>>>> In the
"https://wiki.samba.org/index.php/Setup_and_configure_file_shares_with_Windows_ACLs"
, the other steps are in Windows!!! Can I doing via Linux too?
>>>>>>     
>>>>> Yes, but it is just easier via windows
>>>>>
>>>>> Rowland
>>>>>
>>>>>
>>>>>>   
>>>>>> Thanks.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Monday, December 29, 2014 1:59 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>>>>> On 29/12/14 06:38, Jason Long wrote:
>>>>>>> Thank you so much.
>>>>>>> You right, My realm is
"jasondomaini.jasondomain.jj"  and I change configure as below :
>>>>>>>
>>>>>>>
>>>>>>> [global]
>>>>>>> workgroup = JASONDOMAINI
>>>>>>> server string = Samba Server Version %v
>>>>>>> # logs split per machine
>>>>>>> log file = /var/log/samba/log.%m
>>>>>>> # max 50KB per log file, then rotate
>>>>>>> max log size = 50
>>>>>>> security = ADS
>>>>>>> realm = JASONDOMAINI.JASONDOMAIN.JJ
>>>>>>> passdb backend = tdbsam
>>>>>>> load printers = yes
>>>>>>> cups options = raw
>>>>>>> idmap config *:backend = tdb
>>>>>>> idmap config *:range = 70001-80000
>>>>>>> #idmap config SAMDOM:backend = ad
>>>>>>> idmap config JASONDOMAINI:backend = ad
>>>>>>> idmap config JASONDOMAINI:schema_mode = rfc2307
>>>>>>> idmap config JASONDOMAINI:range = 500-40000
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> When I use "SSH" on my CentOS and enter
"jasondomain\jason", It show me the root partition and I can open
"Test" directory But it has two problems :
>>>>>>>
>>>>>>> 1- Why it show root partition?
>>>>>>> 2- I can't browse it via Windows explorer!!!
>>>>>>>
>>>>>>> I want to know use AD users in Linux is Hard?
>>>>>>>
>>>>>>> In your opinion I used a correct command to set
ACL?
>>>>>>>
>>>>>>> #getfacl test/
>>>>>>>
>>>>>>>
>>>>>>> # file: test/
>>>>>>> # owner: JASONDOMAINI\134JASON
>>>>>>> # group: JASONDOMAINI\134grp-JASON-rw
>>>>>>> user::rwx
>>>>>>> group::r-x
>>>>>>> group:JASONDOMAINI\134grp-JASON-rw:rwx
>>>>>>> mask::rwx
>>>>>>> other::r-x
>>>>>>>
>>>>>>>
>>>>>>> and in "getent group" it show me below
group :
>>>>>>>
>>>>>>> JASONDOMAINI\134grp-JASON-rw
>>>>>>>
>>>>>>>
>>>>>>> in your idea, Am I use correct command to set
permission?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Sunday, December 28, 2014 9:37 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>>>>>> On 28/12/14 15:48, Jason Long wrote:
>>>>>>>> Thank you so much.
>>>>>>>> Thus I must change "idmap config
JASONDOMAIN.JJ:backend = ad " to "idmap config JASONDOMAIN:backend =
ad".
>>>>>>>> How about Workgroup? is must change
"JASONDOMAIN" too?
>>>>>>>> About your question I must say that I Test this
share via Linux too and Windows and Linux has same problem.
>>>>>>>>
>>>>>>>> About "What I would do is, install the
OpenSSH server on the linux machine, install 'PUTTY' on a windows
machine and try to login via 'PUTTY' and use the SSH protocol." ,
You mean is that Windows clients use SSH to work with this directory? I want to
made this Linux Box as a File server and Windows Clients need graphical browser
to copy and paste file into this directory!!!!!!!
>>>>>>>> What is your idea?
>>>>>>>>
>>>>>>>> Thanks.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> I am loosing track here a bit, but if your dns
domain is example.com,
>>>>>>> then your windows AD realm should be something like
internal.example.com
>>>>>>> and your workgroup/domain name should be INTERNAL,
that is, they all
>>>>>>> rely on each other.
>>>>>>>
>>>>>>> So anywhere that you come across these, you should
use the relevant one,
>>>>>>> this is the relevant parts from a Unix client on my
domain:
>>>>>>>
>>>>>>> [global]
>>>>>>>                 workgroup = INTERNAL
>>>>>>>                 security = ADS
>>>>>>>                 realm = INTERNAL.EXAMPLE.COM
>>>>>>>                 ..........
>>>>>>>                 idmap config * : backend = tdb
>>>>>>>                 idmap config * : range = 2000-9999
>>>>>>>                 idmap config INTERNAL : backend  =
ad
>>>>>>>                 idmap config INTERNAL : range =
10000-999999
>>>>>>>                 idmap config INTERNAL : schema_mode
= rfc2307
>>>>>>>
>>>>>>> As for using 'PUTTY', this was just a way
of testing whether you can
>>>>>>> connect to the Unix machine.
>>>>>>>
>>>>>>>
>>>>>>> Rowland
>>>>>> OK, we are getting closer
>>>>>>
>>>>>> right, answers to your questions
>>>>>> 1) I think that you may find that this is also printed
'Could not chdir
>>>>>> to home directory', in which case you will end up
in the root of computer.
>>>>>>
>>>>>> 2) Are you running the 'nmbd' daemon ? Even if
this is not running you
>>>>>> should be able to navigate to the share by entering the
path. Have a
>>>>>> look here:
>>>>>>
>>>>>>
https://wiki.samba.org/index.php/Setup_and_configure_file_shares_with_Windows_ACLs
>>>>>>
>>>>>>
>>>>>> Rowland
>>>>>>
>>>> You are trying to run the command on a client, try adding
either:
>>>>
>>>> -S server name
>>>>
>>>> OR
>>>>
>>>> -I address of target server
>>>>
>>>> where 'server' is the AD DC.
>>>>
>>>> Yes, you need to supply the password of the Domain
Administrator.
>>>>
>>>>
>>>> Rowland
>>>>
>>> OK, try it like this:
>>>
>>> net rpc rights grant 'Domain Admins'
SeDiskOperatorPrivilege
>>> -UAdministrator -I 192.168.1.1
>>>
>>> This works for me on a client joined to the domain.
>>>
>>>
>>> Rowland
>>>
>> Sounds like something is wrong with the join, what does 'net ads
>> testjoin' return ? You may have to run this command with sudo.
>>
>>
>> Rowland
>>
Sometimes I wonder why all the time is spent on keeping the samba wiki 
updated. Likewiseopen was replaced sometime ago by PowerBroker Open, I 
cannot recommend using either of these, because quite simply, they are 
not needed.

Check the following files:

/etc/samba/smb.conf

[global]
         workgroup = JASONDOMAINI
         security = ADS
         realm = JASONDOMAINI.JASONDOMAIN.JJ
         dedicated keytab file = /etc/krb5.keytab
         kerberos method = secrets and keytab
         server string = Samba 4 Client %h
         winbind enum users = yes
         winbind enum groups = yes
         winbind use default domain = yes
         winbind expand groups = 4
         winbind nss info = rfc2307
         winbind refresh tickets = Yes
         winbind normalize names = Yes
         idmap config * : backend = tdb
         idmap config * : range = 2000-9999
         idmap config JASONDOMAINI : backend  = ad
         idmap config JASONDOMAINI : range = 10000-999999
         idmap config JASONDOMAINI : schema_mode = rfc2307
         printcap name = cups
         cups options = raw
         usershare allow guests = yes
         domain master = no
         local master = no
         preferred master = no
         os level = 20
         map to guest = bad user
         vfs objects = acl_xattr
         map acl inherit = Yes
         store dos attributes = Yes
         log level = 6

/etc/krb5.conf

[libdefaults]
      default_realm = JASONDOMAINI.JASONDOMAIN.JJ
      dns_lookup_realm = false
      dns_lookup_kdc = true
      ticket_lifetime = 24h
      forwardable = yes

/etc/resolv.conf

nameserver <your AD DC's ipaddress>
search jasondomaini.jasondomain.jj

If required, alter them to match the above, check that 'hostname' 
returns only the hostname of the client, check that 'hostname -f' 
returns the FQDN. If either are not correct, fix them.

Remove likewiseopen

Once everything is correct, run the following command:

net ads join -U Administrator at JASONDOMAINI.JASONDOMAIN.JJ

You should be asked for the domain Administrators password, enter this 
and you should join the domain

Rowland

Jason Long

2015-Jan-04 10:17 UTC

head link

[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.

Thanks a lot.
I enter the command and result is :

Using short domain name -- JASONDOMAINI
Joined 'PRINTMAH' to dns domain 'JASONDOMAIN.JJ'
but after run "net rpc testjoin" :

Unable to find a suitable server for domain JASONDOMAINI
Join to domain 'JASONDOMAINI' is not valid: NT_STATUS_UNSUCCESSFUL

I guess I understand what is my problem. I'm really sorry :(.

On Windows OS i used "set" command and it show me :

USERDNSDOMAIN= JASONDOMAIN.JJ
USERDOMAIN= JASONDOMAINI

I guess that I must change "JASONDOMAINI" in below texts to
"JASONDOMAIN" :

idmap config JASONDOMAINI : range = 10000-999999
idmap config JASONDOMAINI : schema_mode = rfc2307

Am I right?




On Saturday, January 3, 2015 7:44 AM, Rowland Penny <rowlandpenny at
googlemail.com> wrote:
On 03/01/15 15:08, Jason Long wrote:> Thank you.
> I used below videos for join my Linux Box to Windows domain :
>
> http://www.youtube.com/watch?v=Y3TFPDT9uic
>
> Please look at this video and I used instructions in it and LikeWiseOpen
tool.
>
>
> Cheers.
>
>
>
> On Saturday, January 3, 2015 5:45 AM, Rowland Penny <rowlandpenny at
googlemail.com> wrote:
> On 03/01/15 12:38, Jason Long wrote:
>> Thanks.
>>
>> I enter "net ads testjoin" and it show me :
>>
>> ads_connect: No logon servers
>> Join to domain is not valid: No logon servers
> You are *not* joined to the domain, I suppose this should have been
> asked earlier, but how did you do the domain join ?
>
> Rowland
>
>
>
>> If it is incorrect, Why I can Login to Linux via Windows account? As
you see, I followed the steps on Video.
>>
>> :(.
>>
>>
>>
>> On Saturday, January 3, 2015 1:13 AM, Rowland Penny <rowlandpenny at
googlemail.com> wrote:
>> On 03/01/15 05:41, Jason Long wrote:
>>> Thank you.
>>> Command show below error :
>>>
>>> Could not connect to server 192.168.1.1
>>> Connection failed: NT_STATUS_INVALID_WORKSTATION
>>>
>>> :(
>>>
>>>
>>>
>>> On Wednesday, December 31, 2014 2:05 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>> On 31/12/14 09:55, Jason Long wrote:
>>>> Thanks.
>>>> I changed the command as below :
>>>>
>>>> #net rpc rights grant 'jasondomain\Domain Admins'
SeDiskOperatorPrivilege -U jasondomain\\administrator -I 192.168.1.1
>>>>
>>>> But Got below error :
>>>>
>>>> Could not connect to server 192.168.1.1
>>>> Connection failed: NT_STATUS_INVALID_WORKSTATION
>>>>
>>>> Cheers.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Wednesday, December 31, 2014 1:35 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>>> On 31/12/14 09:17, Jason Long wrote:
>>>>> Thank you so much but I run below commands on linux :
>>>>>
>>>>>
>>>>> # net rpc rights grant 'jasondomain\Domain Admins'
SeDiskOperatorPrivilege -Uadministrator
>>>>> # net rpc rights list accounts -Uadministrator
>>>>>
>>>>> it ask me a password for "administrator:
>>>>>
>>>>> Enter administrator's password:
>>>>> Could not connect to server 127.0.0.1
>>>>> Connection failed: NT_STATUS_NO_LOGON_SERVERS
>>>>>
>>>>> Must I enter windows administrator password?
>>>>>
>>>>>
>>>>> Thanks.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Monday, December 29, 2014 5:10 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>>>> On 29/12/14 12:52, Jason Long wrote:
>>>>>> Thank you so much.
>>>>>>
>>>>>> I did some changes like below :
>>>>>>
>>>>>> /dev/mapper/vg_print-lv_root /                      
ext4    user_xattr,acl,defaults        1 1
>>>>>>
>>>>>>
>>>>>> Then "lsof | grep
/dev/mapper/vg_print-lv_root" not have any output.
>>>>>> I added below lines to [global] section too :
>>>>>>
>>>>>> vfs objects = acl_xattr
>>>>>> map acl inherit = Yes
>>>>>> store dos attributes = Yes
>>>>>>
>>>>>> But about below commands can you tell me more?
>>>>>>
>>>>>> net rpc rights grant 'SAMDOM\Domain Admins'
SeDiskOperatorPrivilege -Uadministrator
>>>>>> net rpc rights list accounts -Uadministrator
>>>>>>
>>>>>> I hope they are not Dangerous!!!!
>>>>> No :-)
>>>>>
>>>>> The first one gives members of Domain Admins the right to
change windows
>>>>> ACL's on a share
>>>>> The second list accounts and what rights they have.
>>>>>
>>>>>> In the
"https://wiki.samba.org/index.php/Setup_and_configure_file_shares_with_Windows_ACLs"
, the other steps are in Windows!!! Can I doing via Linux too?
>>>>>>    
>>>>> Yes, but it is just easier via windows
>>>>>
>>>>> Rowland
>>>>>
>>>>>
>>>>>>  
>>>>>> Thanks.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Monday, December 29, 2014 1:59 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>>>>> On 29/12/14 06:38, Jason Long wrote:
>>>>>>> Thank you so much.
>>>>>>> You right, My realm is
"jasondomaini.jasondomain.jj"  and I change configure as below :
>>>>>>>
>>>>>>>
>>>>>>> [global]
>>>>>>> workgroup = JASONDOMAINI
>>>>>>> server string = Samba Server Version %v
>>>>>>> # logs split per machine
>>>>>>> log file = /var/log/samba/log.%m
>>>>>>> # max 50KB per log file, then rotate
>>>>>>> max log size = 50
>>>>>>> security = ADS
>>>>>>> realm = JASONDOMAINI.JASONDOMAIN.JJ
>>>>>>> passdb backend = tdbsam
>>>>>>> load printers = yes
>>>>>>> cups options = raw
>>>>>>> idmap config *:backend = tdb
>>>>>>> idmap config *:range = 70001-80000
>>>>>>> #idmap config SAMDOM:backend = ad
>>>>>>> idmap config JASONDOMAINI:backend = ad
>>>>>>> idmap config JASONDOMAINI:schema_mode = rfc2307
>>>>>>> idmap config JASONDOMAINI:range = 500-40000
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> When I use "SSH" on my CentOS and enter
"jasondomain\jason", It show me the root partition and I can open
"Test" directory But it has two problems :
>>>>>>>
>>>>>>> 1- Why it show root partition?
>>>>>>> 2- I can't browse it via Windows explorer!!!
>>>>>>>
>>>>>>> I want to know use AD users in Linux is Hard?
>>>>>>>
>>>>>>> In your opinion I used a correct command to set
ACL?
>>>>>>>
>>>>>>> #getfacl test/
>>>>>>>
>>>>>>>
>>>>>>> # file: test/
>>>>>>> # owner: JASONDOMAINI\134JASON
>>>>>>> # group: JASONDOMAINI\134grp-JASON-rw
>>>>>>> user::rwx
>>>>>>> group::r-x
>>>>>>> group:JASONDOMAINI\134grp-JASON-rw:rwx
>>>>>>> mask::rwx
>>>>>>> other::r-x
>>>>>>>
>>>>>>>
>>>>>>> and in "getent group" it show me below
group :
>>>>>>>
>>>>>>> JASONDOMAINI\134grp-JASON-rw
>>>>>>>
>>>>>>>
>>>>>>> in your idea, Am I use correct command to set
permission?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Sunday, December 28, 2014 9:37 AM, Rowland Penny
<rowlandpenny at googlemail.com> wrote:
>>>>>>> On 28/12/14 15:48, Jason Long wrote:
>>>>>>>> Thank you so much.
>>>>>>>> Thus I must change "idmap config
JASONDOMAIN.JJ:backend = ad " to "idmap config JASONDOMAIN:backend =
ad".
>>>>>>>> How about Workgroup? is must change
"JASONDOMAIN" too?
>>>>>>>> About your question I must say that I Test this
share via Linux too and Windows and Linux has same problem.
>>>>>>>>
>>>>>>>> About "What I would do is, install the
OpenSSH server on the linux machine, install 'PUTTY' on a windows
machine and try to login via 'PUTTY' and use the SSH protocol." ,
You mean is that Windows clients use SSH to work with this directory? I want to
made this Linux Box as a File server and Windows Clients need graphical browser
to copy and paste file into this directory!!!!!!!
>>>>>>>> What is your idea?
>>>>>>>>
>>>>>>>> Thanks.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> I am loosing track here a bit, but if your dns
domain is example.com,
>>>>>>> then your windows AD realm should be something like
internal.example.com
>>>>>>> and your workgroup/domain name should be INTERNAL,
that is, they all
>>>>>>> rely on each other.
>>>>>>>
>>>>>>> So anywhere that you come across these, you should
use the relevant one,
>>>>>>> this is the relevant parts from a Unix client on my
domain:
>>>>>>>
>>>>>>> [global]
>>>>>>>                 workgroup = INTERNAL
>>>>>>>                 security = ADS
>>>>>>>                 realm = INTERNAL.EXAMPLE.COM
>>>>>>>                 ..........
>>>>>>>                 idmap config * : backend = tdb
>>>>>>>                 idmap config * : range = 2000-9999
>>>>>>>                 idmap config INTERNAL : backend  =
ad
>>>>>>>                 idmap config INTERNAL : range =
10000-999999
>>>>>>>                 idmap config INTERNAL : schema_mode
= rfc2307
>>>>>>>
>>>>>>> As for using 'PUTTY', this was just a way
of testing whether you can
>>>>>>> connect to the Unix machine.
>>>>>>>
>>>>>>>
>>>>>>> Rowland
>>>>>> OK, we are getting closer
>>>>>>
>>>>>> right, answers to your questions
>>>>>> 1) I think that you may find that this is also printed
'Could not chdir
>>>>>> to home directory', in which case you will end up
in the root of computer.
>>>>>>
>>>>>> 2) Are you running the 'nmbd' daemon ? Even if
this is not running you
>>>>>> should be able to navigate to the share by entering the
path. Have a
>>>>>> look here:
>>>>>>
>>>>>>
https://wiki.samba.org/index.php/Setup_and_configure_file_shares_with_Windows_ACLs
>>>>>>
>>>>>>
>>>>>> Rowland
>>>>>>
>>>> You are trying to run the command on a client, try adding
either:
>>>>
>>>> -S server name
>>>>
>>>> OR
>>>>
>>>> -I address of target server
>>>>
>>>> where 'server' is the AD DC.
>>>>
>>>> Yes, you need to supply the password of the Domain
Administrator.
>>>>
>>>>
>>>> Rowland
>>>>
>>> OK, try it like this:
>>>
>>> net rpc rights grant 'Domain Admins'
SeDiskOperatorPrivilege
>>> -UAdministrator -I 192.168.1.1
>>>
>>> This works for me on a client joined to the domain.
>>>
>>>
>>> Rowland
>>>
>> Sounds like something is wrong with the join, what does 'net ads
>> testjoin' return ? You may have to run this command with sudo.
>>
>>
>> Rowland
>>
Sometimes I wonder why all the time is spent on keeping the samba wiki 
updated. Likewiseopen was replaced sometime ago by PowerBroker Open, I 
cannot recommend using either of these, because quite simply, they are 
not needed.

Check the following files:

/etc/samba/smb.conf

[global]
         workgroup = JASONDOMAINI
         security = ADS
         realm = JASONDOMAINI.JASONDOMAIN.JJ
         dedicated keytab file = /etc/krb5.keytab
         kerberos method = secrets and keytab
         server string = Samba 4 Client %h
         winbind enum users = yes
         winbind enum groups = yes
         winbind use default domain = yes
         winbind expand groups = 4
         winbind nss info = rfc2307
         winbind refresh tickets = Yes
         winbind normalize names = Yes
         idmap config * : backend = tdb
         idmap config * : range = 2000-9999
         idmap config JASONDOMAINI : backend  = ad
         idmap config JASONDOMAINI : range = 10000-999999
         idmap config JASONDOMAINI : schema_mode = rfc2307
         printcap name = cups
         cups options = raw
         usershare allow guests = yes
         domain master = no
         local master = no
         preferred master = no
         os level = 20
         map to guest = bad user
         vfs objects = acl_xattr
         map acl inherit = Yes
         store dos attributes = Yes
         log level = 6

/etc/krb5.conf

[libdefaults]
      default_realm = JASONDOMAINI.JASONDOMAIN.JJ
      dns_lookup_realm = false
      dns_lookup_kdc = true
      ticket_lifetime = 24h
      forwardable = yes

/etc/resolv.conf

nameserver <your AD DC's ipaddress>
search jasondomaini.jasondomain.jj

If required, alter them to match the above, check that 'hostname' 
returns only the hostname of the client, check that 'hostname -f' 
returns the FQDN. If either are not correct, fix them.

Remove likewiseopen

Once everything is correct, run the following command:

net ads join -U Administrator at JASONDOMAINI.JASONDOMAIN.JJ

You should be asked for the domain Administrators password, enter this 
and you should join the domain

Rowland

-- 
To unsubscribe from this list go to the following URL and read the

instructions:  https://lists.samba.org/mailman/options/samba

Jeremy Allison

2015-Jan-05 18:46 UTC

head link

[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.

On Sat, Jan 03, 2015 at 03:08:49PM +0000, Jason Long
wrote:> Thank you.
> I used below videos for join my Linux Box to Windows domain :
> 
> http://www.youtube.com/watch?v=Y3TFPDT9uic
> 
> Please look at this video and I used instructions in it and LikeWiseOpen
tool.
LikeWiseOpen is an ex-proprietary tool that is now abandonware.

I wouldn't use it.

Jason Long

2015-Jan-06 06:18 UTC

head link

[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.

Is it dangerous ?



On Monday, January 5, 2015 10:46 AM, Jeremy Allison <jra at samba.org>
wrote:
On Sat, Jan 03, 2015 at 03:08:49PM +0000, Jason Long
wrote:> Thank you.
> I used below videos for join my Linux Box to Windows domain :
> 
> http://www.youtube.com/watch?v=Y3TFPDT9uic
> 
> Please look at this video and I used instructions in it and LikeWiseOpen
tool.
LikeWiseOpen is an ex-proprietary tool that is now abandonware.

I wouldn't use it.
-- 
To unsubscribe from this list go to the following URL and read the

instructions:  https://lists.samba.org/mailman/options/samba

Seemingly Similar Threads

Search for more seemingly similar threads

samba - Jan 2015 - Use Samba with ACL for read Active Directory and set Permissions via it.

[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.

[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.

[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.

[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.

[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.

Seemingly Similar Threads