Dear friends,
I have encountered a problem with Samba 2.2.2 (on Solaris 8, mandatory
patches installed).
Samba works well with security=user on our SPARC called sunny but then I
try to get security=domain to work.
So I followed the instructions in the html files, notably create a machine
account for sunny using smbclient -j COMLAB -r roticos -U Administrator -
this prompted me for the Administrator passwd and it worked fine. The
secrets database was created, a SID file also appeared under
/usr/local/samba/private. Roticos is the PDC (Win 2000, SP2) for the COMLAB
domaiin.
Indeed the machine "sunny" i.e. our Solaris Sparc appeared in Win 2ks
User
and Computer Manager. You can click it and it does open. However *none* of
the Samba shares are visible and when you try to connect from roticos to
sunny (logged into roticos as administrator) the first attempt does not
work (obvious, no administrator UNIX account on sunny), but then when I try
to connect as a different user (as the pop up opens) then I also get a
failure.
I have included the log files log.smnbd and log.roticos - the client in
this case as well as my smb.conf.
I think I might be doing something simple wrong. I am confused if I should
use winbindd - well at the moment my users do not mind having a passwd and
account on Solaris and are used to it from the older Samba and I honestlay
would prefer not messing around with PAM etc. on Solaris.
I thought that security=domain would be a good compromise - I would not
have to mess around with PAM and the users would be able to easily access
samba because Samba could get at their credentials via the PDC - or do I
have the wrong picture here ?
I have the nagging feeling I am doing something wrong or am totally
confused - can anyone put me right ? This is my 50th Samba but I am used to
the older versions and this is quite new to me.
Thank you very much.
Love
Snoopy
-------------- next part --------------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
"testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings
====================================[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4
workgroup = COMLab
# server string is the equivalent of the NT Description field
server string = Domain 4 Sec Server Sunny
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
hosts allow = 195.30.48. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
; load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 100
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = domain
# Use password server option only with security = server
# or security=domain, see html files chapt. 7.1 - Snoopy
password server = roticos
encrypt passwords = yes
browseable = yes
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /usr/local/samba/lib/smb.conf.%m
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
interfaces = 195.30.48.8/25
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
#============================ Share Definitions =============================#
Home share might be strange as NOT writeable. We do not want this
# writeable by everyone everywhere but rather only by the user - hence the
# write list as %S trick - Snoopy
[homes]
comment = Sunny Home Directories
browseable = yes
writable = no
write list = %S
path = /export/home/%u
[tmp]
comment = Temporary file space
path = /tmp
read only = no
public = yes
# This section is added by Michael Maretzke - 2002-01-08
[usrlocal]
comment = Link to /usr/local on sunny
path = /usr/local
valid users = wb_admin
public = no
writable = yes
printable = no
# End of the section added by Michael.
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
;[printers]
; comment = All Printers
; path = /usr/spool/samba
; browseable = no
;# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# This one is useful for people to share files
# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in
fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
-------------- next part --------------
[2002/01/08 17:32:59, 2] lib/interface.c:add_interface(85)
added interface ip=195.30.48.8 bcast=195.30.48.127 nmask=255.255.255.128
[2002/01/08 17:32:59, 2] smbd/server.c:open_sockets(201)
waiting for a connection
[2002/01/08 17:33:50, 2] lib/access.c:check_access(318)
Allowed connection from (195.30.48.2)
[2002/01/08 17:33:50, 2] smbd/reply.c:reply_special(93)
netbios connect: name1=SUNNY name2=ROTICOS
[2002/01/08 17:33:50, 2] smbd/reply.c:reply_special(112)
netbios connect: local=sunny remote=roticos
[2002/01/08 17:34:13, 2] lib/access.c:check_access(318)
Allowed connection from (195.30.48.2)
[2002/01/08 17:34:13, 2] smbd/reply.c:reply_special(93)
netbios connect: name1=SUNNY name2=ROTICOS
[2002/01/08 17:34:13, 2] smbd/reply.c:reply_special(112)
netbios connect: local=sunny remote=roticos
[2002/01/08 17:34:30, 2] lib/access.c:check_access(318)
Allowed connection from (195.30.48.2)
[2002/01/08 17:34:30, 2] smbd/reply.c:reply_special(93)
netbios connect: name1=SUNNY name2=ROTICOS
[2002/01/08 17:34:30, 2] smbd/reply.c:reply_special(112)
netbios connect: local=sunny remote=roticos
[2002/01/08 17:39:11, 2] smbd/server.c:exit_server(458)
Closing connections
-------------- next part --------------
[2002/01/08 17:33:50, 0] smbd/password.c:domain_client_validate(1554)
domain_client_validate: could not fetch trust account password for domain
COMLAB
[2002/01/08 17:33:50, 2] smbd/password.c:pass_check_smb(576)
pass_check_smb failed - invalid password for user [snoopy]
[2002/01/08 17:33:50, 2] smbd/reply.c:reply_sesssetup_and_X(970)
NT Password did not match for user 'snoopy'!
[2002/01/08 17:33:50, 2] smbd/reply.c:reply_sesssetup_and_X(980)
Defaulting to Lanman password for snoopy
[2002/01/08 17:33:50, 2] smbd/password.c:pass_check_smb(576)
pass_check_smb failed - invalid password for user [snoopy]
[2002/01/08 17:33:50, 1] smbd/reply.c:reply_sesssetup_and_X(995)
Rejecting user 'snoopy': authentication failed
[2002/01/08 17:33:50, 2] smbd/server.c:exit_server(458)
Closing connections
[2002/01/08 17:34:13, 0] smbd/password.c:domain_client_validate(1554)
domain_client_validate: could not fetch trust account password for domain
COMLAB
[2002/01/08 17:34:13, 1] smbd/password.c:pass_check_smb(546)
Couldn't find user 'administrator' in passdb.
[2002/01/08 17:34:13, 2] smbd/reply.c:reply_sesssetup_and_X(970)
NT Password did not match for user 'administrator'!
[2002/01/08 17:34:13, 2] smbd/reply.c:reply_sesssetup_and_X(980)
Defaulting to Lanman password for administrator
[2002/01/08 17:34:13, 1] smbd/password.c:pass_check_smb(546)
Couldn't find user 'administrator' in passdb.
[2002/01/08 17:34:13, 1] smbd/reply.c:reply_sesssetup_and_X(995)
Rejecting user 'administrator': authentication failed
[2002/01/08 17:34:13, 0] smbd/password.c:domain_client_validate(1554)
domain_client_validate: could not fetch trust account password for domain
COMLAB
[2002/01/08 17:34:13, 1] smbd/password.c:pass_check_smb(546)
Couldn't find user 'administrator' in passdb.
[2002/01/08 17:34:13, 2] smbd/reply.c:reply_sesssetup_and_X(970)
NT Password did not match for user 'administrator'!
[2002/01/08 17:34:13, 2] smbd/reply.c:reply_sesssetup_and_X(980)
Defaulting to Lanman password for administrator
[2002/01/08 17:34:13, 1] smbd/password.c:pass_check_smb(546)
Couldn't find user 'administrator' in passdb.
[2002/01/08 17:34:13, 1] smbd/reply.c:reply_sesssetup_and_X(995)
Rejecting user 'administrator': authentication failed
[2002/01/08 17:34:13, 2] smbd/server.c:exit_server(458)
Closing connections
[2002/01/08 17:34:30, 2] smbd/server.c:exit_server(458)
Closing connections
-------------- next part --------------
"We breathe fire into your IT"
Data Dragons GmbH
IT Services and Telecommunications
Voice: +49-171-719 17 69 Paper: +49-89-904 691 69
http://www.datadragons.de