I'm sure you guys/gals see a lot of these... but I've honestly tried and tried (rtfm'd and such) until I'm frustrated beyond words. I'm turning here as a last resort before I resort to networking via wsftp as I have been happily doing for quite some time now. Any help, pointers or suggestions would be greatly appreciated. Please respond to me directly and if there is a way to do what I want/need, I'd be more than happy to summarize to the list. Scott ---[ 8< CUT HERE ]-------- --- SITUATION --- This is my home setup. I'd like to get some peecee network going. I've managed UNIX/INTERNET networks for quite some time, so I know that lingo and don't have any problems getting them going no matter what the complexity. However, I have been completely denied any and most all attempts to get a peecee network going -- even the simplest of getting samba to do a single network reliably. I would appreciate definitive answers as I have read the documentation for SAMBA (much of it is out of date) and much of it doesn't help or gives non-corresponding instructions. --- NETWORK SETUP --- ROUTER: Cisco 2511, IOS 11.0, Serial 0: T1 Serial 1: empty IP: 206.206.178.1, BROADCAST: 206.206.178.255 IP (SECONDARY): 198.232.139.1, BROADCAST 198.232.139.255 *ACCESS LISTS ARE IN PLACE* I have opened up DNS and TCP/139, UDP/137 between networks from x.x.x.0/x.x.x.255 on each to x.x.x.0/x.x.x.255 on the other. DIAL IN IP @ IP: 206.206.178.5 and 206.206.178.6 SERVERS: Sun Ultra 170, security.spy.org IP: 198.232.139.2, BROADCAST: 198.232.139.255 SAMBA: 1.9.18p1, DOMAIN(?)=WORKGROUP Sun SparcStation10 w/ 2 41MHz cpus, bidask.com IP: 206.206.178.2, BROADCAST: 206.206.178.2 CLIENTS: Nec Versa M/100, 486/100 laptop, Win95b(OSR2), ticker.bidask.com IP: 206.206.178.5, BROADCAST: 206.206.178.255 Nec Versa P/75, P75 laptop, Win95b(OSR2), nomad.spy.org IP: 198.232.139.5, BROADCAST: 198.232.139.255 Generic, P][/266 desktop, Win95b(OSR2), bedroom.spy.org IP: 198.232.139.75, BROADCAST: 198.232.139.255 Question: I would like to have two domains, one "business" on bidask.com that only sees bidask.com ("BUSINESS") but is available for browsing by any client such as TICKER, NOMAD or BEDROOM (ie: eventually from dialup ip) -- AND -- have anothe workgroup "SPY" or "PRIVATE" on security.spy.org but have this one *not* be visible from the bidask.com network (ie: dialup). Again, these are two different class C (old style /24) networks. Is this possible? I mean, I'd really like to be able to hit network neighborhood and see workgroups "BUSINESS" and "PRIVATE" and then when I select on one, get a login for that workgroup. I think this is probably a very alien way of doing this for the peecee, so I'm not against having to specify the workgroup all over the setup of all the peecees -- in this case, there will simply be one workgroup -- "SPY" and I'd like it to go across two class C networks with one network being the master and the other being a slave or subsidiary to the master with all wins and user passwords going through the master. WHAT I AM TRYING TO DO: I am trying to set up a workgroup called ``WORKGROUP'' for now. This will be served by BIDASK (bidask.com/206.206.178.2), and will be a master domain (whatever) server as well as a wins server (whatever) for *everything*. I have been unable to get samba to run on security and on bidask and have them talk to each other without one causing the other to disappear (normally they *both* disappear). I ahve managed, once, to get both SECURITY and BIDASK to both be "active" (but not appear everywhere) and even when I could see the servers, I couldn't browse them (error said couldn't find host? wins problem?) PROBLEMS: (1) Can't seem to get samba to allow browsing across networks. (2) Can't seem to find machine names across networks. (3) Can't make a lmhosts file (where is the documenation!!) that works. Keeps ignoring domain tags (and line?) and saying that file syntax was obsolete or there were too many columns *and* if it did take a line, it would *not* take a machine with an IP off the local network! (4) I have different users and password on SECURITY and BIDASK but I'm tired of getting the error message stating that there wasn't a domain server to verify the login password -- ie: the timeout was annoying and the error message moreso. WHAT I WOULD APRECIATE: (1) An example smb.conf showing a non-domain master (whatever) for SECURITY with workgroup name "WORKGROUP" remote syncing or advertising to BIDASK. An example smb.conf showing a master + wins for BIDASK. This would, of course, make security forward wins resolution to BIDASK and all user logons would be via password (user level security?) via the passwords stored on this server. -- OR -- (2) Any refernce (url?) to a source that has *UP* *TO* *DATE* *DOCUMENTATION* or *FAQ* or *HOWTO* on how to do this. I have read cross network stuff under 1.9.18pl2/docs/BROWSING.txt but this doesn't seem to solve the problem.