Jorrit Jongma
2020-May-18 19:55 UTC
[PATCH] SSE2/SSSE3 optimized version of get_checksum1() for x86-64
What do you base this on? Per https://gcc.gnu.org/onlinedocs/gcc/x86-Options.html : "For the x86-32 compiler, you must use -march=cpu-type, -msse or -msse2 switches to enable SSE extensions and make this option effective. For the x86-64 compiler, these extensions are enabled by default." That reads to me like we're fine for SSE2. As stated in my comments, SSSE3 support must be manually enabled at build time. Your comment would imply that SSSE3 is enabled out of the box on builds on machines that support it, this is not the case (it certainly isn't on my Ubuntu box). It would be preferred to detect this at runtime but getting that to work on GCC is (apparently) a mess, and would probably require modifications to configure/Makefile/etc that I'm not comfortable doing, as my lack of expertise on those would probably lead me to break the build for somebody else. If someone knowledgable enough in that area wants to fix it, though... The only reason there's an SSE2 backport (you'll find SSSE3 support on most CPUs up to nearly a decade old) in the first place is because by my understanding SSE2 is supported on all x86-64 CPUs out of the box.> You can't replace the code like that with SSE2+. You need runtime > detection for this. Otherwise it can't be enabled by distros becuase it > would fail on CPUs without SSE2+. Only SSE is part of generic x86-64.
Sebastian Andrzej Siewior
2020-May-18 21:41 UTC
[PATCH] SSE2/SSSE3 optimized version of get_checksum1() for x86-64
On 2020-05-18 21:55:13 [+0200], Jorrit Jongma wrote:> What do you base this on?So my memory was wrong. SSE2 is supported by all x86-64bit CPUs. Sorry for that.> would imply that SSSE3 is enabled out of the box on builds on machines > that support it, this is not the case (it certainly isn't on my Ubuntu > box). It would be preferred to detect this at runtime but getting that > to work on GCC is (apparently) a mess, and would probably require > modifications to configure/Makefile/etc that I'm not comfortable > doing, as my lack of expertise on those would probably lead me to > break the build for somebody else. If someone knowledgable enough in > that area wants to fix it, though...My suggestion would be to have a get_checksum1_sse2() and get_checksum1_sse3() and always build them. The compiler should support it. Then on runtime you would check for sse3 and based on the result get_checksum1() would either invoke the _sse2() or sse3(). Without auto detection it won't be utilized by distros. But yes, this could be improved afterwards. Sebastian
Jorrit Jongma
2020-May-18 22:07 UTC
[PATCH] SSE2/SSSE3 optimized version of get_checksum1() for x86-64
Unfortunately we can't "always build" the SSSE3 code. It won't even build unless the "-mssse3" flag is presented to GCC. We don't want to build the entire project with this flag enabled, as it might trigger SSSE3 optimizations outside of our runtime decided code path that may break on CPUs that do not support it. A suggestion found online was isolating the SSSE3 version in "checksum_ssse3.c" and compiling only that file with "-mssse3", but some searching around has led me to reports from developers who had even that setup cause issues with code shared between SSE and non-SSE objects. I think that risk is low for this case though, as we're just doing some math and not passing anything but integers and pointers. I wouldn't think twice about enabling it that way on one of my pet projects, but a project as widespread as rsync should not have that in its codebase unless we're _absolutely_ sure it doesn't cause problems for _anybody_. A very small risk of issues times many millions of users equals guaranteed failure. But even if we use that method it requires modifications to the build scripts (check for x86-64 and exclude otherwise, present file-specific flags) that are beyond my experience with this build setup.> My suggestion would be to have a get_checksum1_sse2() and > get_checksum1_sse3() and always build them. The compiler should support > it. Then on runtime you would check for sse3 and based on the result > get_checksum1() would either invoke the _sse2() or sse3(). > > Without auto detection it won't be utilized by distros. But yes, this > could be improved afterwards.
Jorrit Jongma
2020-May-19 14:28 UTC
[PATCHv2] SSE2/SSSE3 optimized version of get_checksum1() for x86-64
I've read up some more on the subject, and it seems the proper way to do this with GCC is g++ and target attributes. I've refactored the patch that way, and it indeed uses SSSE3 automatically on supporting CPUs, regardless of the build host, so this should be ideal both for home builders and distros. Getting the code to build right in c++ mode (checksum_sse2.cpp only) was a bit of an adventure, requiring modifications to mkproto.awk, configure.ac, and Makefile.in. I've done my best to prevent any c++ compilation happening in case the optimizations are not enabled (g++ isn't used, build target isn't x86-64, or --disable-sse2 was passed to configure) and prevent a dependency on libstdc++. I've tested that part extensively but it would be great if the maintainer (and others) could give this part a close second look. This patch _replaces_ my previous submit, it does not build on top of it. GitHub: https://github.com/Chainfire/rsync/commit/ef3c13390601752ef652b37c15610e12e2309fea https://github.com/Chainfire/rsync/commit/ef3c13390601752ef652b37c15610e12e2309fea.patch Raw:>From ef3c13390601752ef652b37c15610e12e2309fea Mon Sep 17 00:00:00 2001From: Jorrit Jongma <git at jongma.org> Date: Tue, 19 May 2020 14:52:40 +0200 Subject: [PATCH] SSE2/SSSE3 optimized version of get_checksum1() for x86-64 Requires compilation using GCC C++ front end, build scripts have been modified accordingly. C++ is only used when the optimization is enabled (g++ as compiler, x86-64 build target, --disable-sse2 not passed to configure). --- Makefile.in | 12 +- checksum.c | 2 + checksum_sse2.cpp | 289 ++++++++++++++++++++++++++++++++++++++++++++++ configure.ac | 22 ++++ mkproto.awk | 2 + 5 files changed, 325 insertions(+), 2 deletions(-) create mode 100644 checksum_sse2.cpp diff --git a/Makefile.in b/Makefile.in index 59649562..0953e601 100644 --- a/Makefile.in +++ b/Makefile.in @@ -12,6 +12,9 @@ LIBS=@LIBS@ CC=@CC@ CFLAGS=@CFLAGS@ CPPFLAGS=@CPPFLAGS@ +CXX=@CXX@ +CXXFLAGS=@CXXFLAGS@ +CXXUSED=@CXXUSED@ EXEEXT=@EXEEXT@ LDFLAGS=@LDFLAGS@ LIBOBJDIR=lib/ @@ -27,7 +30,11 @@ SHELL=/bin/sh VERSION=@RSYNC_VERSION@ .SUFFIXES: -.SUFFIXES: .c .o +ifeq ($(CXXUSED),yes) + .SUFFIXES: .c .cpp .o +else + .SUFFIXES: .c .o +endif GENFILES=configure.sh aclocal.m4 config.h.in proto.h proto.h-tstamp rsync.1 rsync-ssl.1 rsyncd.conf.5 HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h itypes.h inums.h \ @@ -41,10 +48,11 @@ OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \ OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \ fileio.o batch.o clientname.o chmod.o acls.o xattrs.o OBJS3=progress.o pipe.o +CXXOBJ=@CXXOBJ@ DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \ popt/popthelp.o popt/poptparse.o -OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) @BUILD_ZLIB@ @BUILD_POPT@ +OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(CXXOBJ) $(DAEMON_OBJ) $(LIBOBJ) @BUILD_ZLIB@ @BUILD_POPT@ TLS_OBJ = tls.o syscall.o t_stub.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o @BUILD_POPT@ diff --git a/checksum.c b/checksum.c index cd234038..7c42742a 100644 --- a/checksum.c +++ b/checksum.c @@ -99,6 +99,7 @@ int canonical_checksum(int csum_type) return csum_type >= CSUM_MD4 ? 1 : 0; } +#ifndef ENABLE_SSE2 // see checksum_sse2.cpp /* a simple 32 bit checksum that can be updated from either end (inspired by Mark Adler's Adler-32 checksum) @@ -119,6 +120,7 @@ uint32 get_checksum1(char *buf1, int32 len) } return (s1 & 0xffff) + (s2 << 16); } +#endif void get_checksum2(char *buf, int32 len, char *sum) { diff --git a/checksum_sse2.cpp b/checksum_sse2.cpp new file mode 100644 index 00000000..9a2ae86b --- /dev/null +++ b/checksum_sse2.cpp @@ -0,0 +1,289 @@ +/* + * SSE2/SSSE3-optimized routines to support checksumming of bytes. + * + * Copyright (C) 1996 Andrew Tridgell + * Copyright (C) 1996 Paul Mackerras + * Copyright (C) 2004-2020 Wayne Davison + * Copyright (C) 2020 Jorrit Jongma + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, visit the http://fsf.org website. + */ +/* + * Optimization target for get_checksum1() was the Intel Atom D2700, the + * slowest CPU in the test set and the most likely to be CPU limited during + * transfers. The combination of intrinsics was chosen specifically for the + * most gain on that CPU, other combinations were occasionally slightly + * faster on the others. + * + * While on more modern CPUs transfers are less likely to be CPU limited, + * lower CPU usage is always better. Improvements may still be seen when + * matching chunks from NVMe storage even on newer CPUs. + * + * Benchmarks C SSE2 SSSE3 + * - Intel Atom D2700 550 MB/s 750 MB/s 1000 MB/s + * - Intel i7-7700hq 1850 MB/s 2550 MB/s 4050 MB/s + * - AMD ThreadRipper 2950x 2900 MB/s 5600 MB/s 8950 MB/s + * + * This optimization for get_checksum1() is intentionally limited to x86-64 + * as no 32-bit CPU was available for testing. As 32-bit CPUs only have half + * the available xmm registers, this optimized version may not be faster than + * the pure C version anyway. Note that all x86-64 CPUs support SSE2. + * + * This file is compiled using GCC 4.8+'s C++ front end to allow the use of + * the target attribute, selecting the fastest code path based on runtime + * detection of CPU capabilities. + */ + +#ifdef __x86_64__ +#ifdef __cplusplus + +#include "rsync.h" + +#ifdef ENABLE_SSE2 + +#include <immintrin.h> + +/* Compatibility functions to let our SSSE3 algorithm run on SSE2 */ + +__attribute__ ((target ("sse2"))) static inline __m128i sse_load_si128(__m128i_u* buf) { + return _mm_loadu_si128(buf); +} + +__attribute__ ((target ("ssse3"))) static inline __m128i sse_load_si128(__m128i_u* buf) { + return _mm_lddqu_si128(buf); // same as loadu on all but the oldest SSSE3 CPUs +} + +__attribute__ ((target ("sse2"))) static inline __m128i sse_interleave_odd_epi16(__m128i a, __m128i b) { + return _mm_packs_epi32( + _mm_srai_epi32(a, 16), + _mm_srai_epi32(b, 16) + ); +} + +__attribute__ ((target ("sse2"))) static inline __m128i sse_interleave_even_epi16(__m128i a, __m128i b) { + return sse_interleave_odd_epi16( + _mm_slli_si128(a, 2), + _mm_slli_si128(b, 2) + ); +} + +__attribute__ ((target ("sse2"))) static inline __m128i sse_mulu_odd_epi8(__m128i a, __m128i b) { + return _mm_mullo_epi16( + _mm_srli_epi16(a, 8), + _mm_srai_epi16(b, 8) + ); +} + +__attribute__ ((target ("sse2"))) static inline __m128i sse_mulu_even_epi8(__m128i a, __m128i b) { + return _mm_mullo_epi16( + _mm_and_si128(a, _mm_set1_epi16(0xFF)), + _mm_srai_epi16(_mm_slli_si128(b, 1), 8) + ); +} + +__attribute__ ((target ("sse2"))) static inline __m128i sse_hadds_epi16(__m128i a, __m128i b) { + return _mm_adds_epi16( + sse_interleave_even_epi16(a, b), + sse_interleave_odd_epi16(a, b) + ); +} + +__attribute__ ((target ("ssse3"))) static inline __m128i sse_hadds_epi16(__m128i a, __m128i b) { + return _mm_hadds_epi16(a, b); +} + +__attribute__ ((target ("sse2"))) static inline __m128i sse_maddubs_epi16(__m128i a, __m128i b) { + return _mm_adds_epi16( + sse_mulu_even_epi8(a, b), + sse_mulu_odd_epi8(a, b) + ); +} + +__attribute__ ((target ("ssse3"))) static inline __m128i sse_maddubs_epi16(__m128i a, __m128i b) { + return _mm_maddubs_epi16(a, b); +} + +__attribute__ ((target ("default"))) static inline __m128i sse_load_si128(__m128i_u* buf) { } +__attribute__ ((target ("default"))) static inline __m128i sse_interleave_odd_epi16(__m128i a, __m128i b) { } +__attribute__ ((target ("default"))) static inline __m128i sse_interleave_even_epi16(__m128i a, __m128i b) { } +__attribute__ ((target ("default"))) static inline __m128i sse_mulu_odd_epi8(__m128i a, __m128i b) { } +__attribute__ ((target ("default"))) static inline __m128i sse_mulu_even_epi8(__m128i a, __m128i b) { } +__attribute__ ((target ("default"))) static inline __m128i sse_hadds_epi16(__m128i a, __m128i b) { } +__attribute__ ((target ("default"))) static inline __m128i sse_maddubs_epi16(__m128i a, __m128i b) { } + +/* + a simple 32 bit checksum that can be updated from either end + (inspired by Mark Adler's Adler-32 checksum) + */ +/* + Original loop per 4 bytes: + s2 += 4*(s1 + buf[i]) + 3*buf[i+1] + 2*buf[i+2] + buf[i+3] + 10*CHAR_OFFSET; + s1 += buf[i] + buf[i+1] + buf[i+2] + buf[i+3] + 4*CHAR_OFFSET; + + SSE2/SSSE3 loop per 32 bytes: + int16 t1[8]; + int16 t2[8]; + for (int j = 0; j < 8; j++) { + t1[j] = buf[j*4 + i] + buf[j*4 + i+1] + buf[j*4 + i+2] + buf[j*4 + i+3]; + t2[j] = 4*buf[j*4 + i] + 3*buf[j*4 + i+1] + 2*buf[j*4 + i+2] + buf[j*4 + i+3]; + } + s2 += 32*s1 + + 28*t1[0] + 24*t1[1] + 20*t1[2] + 16*t1[3] + 12*t1[4] + 8*t1[5] + 4*t1[6] + + t2[0] + t2[1] + t2[2] + t2[3] + t2[4] + t2[5] + t2[6] + t2[7] + + ((16+32+48+64+80+96) + 8)*CHAR_OFFSET; + s1 += t1[0] + t1[1] + t1[2] + t1[3] + t1[4] + t1[5] + t1[6] + t1[7] + + 32*CHAR_OFFSET; + */ +/* + Both sse2 and ssse3 targets must be specified here for the optimizer to + fully unroll into two separate functions for each, or it will decide which + version of other functions (such as sse_maddubs_epi16) to call every loop + iteration instead of properly inlining them, negating any performance gain. + */ +__attribute__ ((target ("sse2", "ssse3"))) static inline uint32 get_checksum1_accel(char *buf1, int32 len) { + int32 i; + uint32 s1, s2; + schar *buf = (schar *)buf1; + + i = s1 = s2 = 0; + if (len > 32) { + const char mul_t1_buf[16] = {28, 0, 24, 0, 20, 0, 16, 0, 12, 0, 8, 0, 4, 0, 0, 0}; + __m128i mul_t1 = sse_load_si128((__m128i_u*)mul_t1_buf); + __m128i ss1 = _mm_setzero_si128(); + __m128i ss2 = _mm_setzero_si128(); + + for (i = 0; i < (len-32); i+=32) { + // Load ... 2*[int8*16] + __m128i in8_1 = sse_load_si128((__m128i_u*)&buf[i]); + __m128i in8_2 = sse_load_si128((__m128i_u*)&buf[i + 16]); + + // (1*buf[i] + 1*buf[i+1]), (1*buf[i+2], 1*buf[i+3]), ... 2*[int16*8] + // Fastest, even though multiply by 1 + __m128i mul_one = _mm_set1_epi8(1); + __m128i add16_1 = sse_maddubs_epi16(mul_one, in8_1); + __m128i add16_2 = sse_maddubs_epi16(mul_one, in8_2); + + // (4*buf[i] + 3*buf[i+1]), (2*buf[i+2], buf[i+3]), ... 2*[int16*8] + __m128i mul_const = _mm_set1_epi32(4 + (3 << 8) + (2 << 16) + (1 << 24)); + __m128i mul_add16_1 = sse_maddubs_epi16(mul_const, in8_1); + __m128i mul_add16_2 = sse_maddubs_epi16(mul_const, in8_2); + + // s2 += 32*s1 + ss2 = _mm_add_epi32(ss2, _mm_slli_epi32(ss1, 5)); + + // [sum(t1[0]..t1[6]), X, X, X] [int32*4]; faster than multiple _mm_hadds_epi16 + // Shifting left, then shifting right again and shuffling (rather than just + // shifting right as with mul32 below) to cheaply end up with the correct sign + // extension as we go from int16 to int32. + __m128i sum_add32 = _mm_add_epi16(add16_1, add16_2); + sum_add32 = _mm_add_epi16(sum_add32, _mm_slli_si128(sum_add32, 2)); + sum_add32 = _mm_add_epi16(sum_add32, _mm_slli_si128(sum_add32, 4)); + sum_add32 = _mm_add_epi16(sum_add32, _mm_slli_si128(sum_add32, 8)); + sum_add32 = _mm_srai_epi32(sum_add32, 16); + sum_add32 = _mm_shuffle_epi32(sum_add32, 3); + + // [sum(t2[0]..t2[6]), X, X, X] [int32*4]; faster than multiple _mm_hadds_epi16 + __m128i sum_mul_add32 = _mm_add_epi16(mul_add16_1, mul_add16_2); + sum_mul_add32 = _mm_add_epi16(sum_mul_add32, _mm_slli_si128(sum_mul_add32, 2)); + sum_mul_add32 = _mm_add_epi16(sum_mul_add32, _mm_slli_si128(sum_mul_add32, 4)); + sum_mul_add32 = _mm_add_epi16(sum_mul_add32, _mm_slli_si128(sum_mul_add32, 8)); + sum_mul_add32 = _mm_srai_epi32(sum_mul_add32, 16); + sum_mul_add32 = _mm_shuffle_epi32(sum_mul_add32, 3); + + // s1 += t1[0] + t1[1] + t1[2] + t1[3] + t1[4] + t1[5] + t1[6] + t1[7] + ss1 = _mm_add_epi32(ss1, sum_add32); + + // s2 += t2[0] + t2[1] + t2[2] + t2[3] + t2[4] + t2[5] + t2[6] + t2[7] + ss2 = _mm_add_epi32(ss2, sum_mul_add32); + + // [t1[0], t1[1], ...] [int16*8] + // We could've combined this with generating sum_add32 above and save one _mm_add_epi16, + // but benchmarking shows that as being slower + __m128i add16 = sse_hadds_epi16(add16_1, add16_2); + + // [t1[0], t1[1], ...] -> [t1[0]*28 + t1[1]*24, ...] [int32*4] + __m128i mul32 = _mm_madd_epi16(add16, mul_t1); + + // [sum(mul32), X, X, X] [int32*4]; faster than multiple _mm_hadd_epi32 + mul32 = _mm_add_epi32(mul32, _mm_srli_si128(mul32, 4)); + mul32 = _mm_add_epi32(mul32, _mm_srli_si128(mul32, 8)); + + // s2 += 28*t1[0] + 24*t1[1] + 20*t1[2] + 16*t1[3] + 12*t1[4] + 8*t1[5] + 4*t1[6] + ss2 = _mm_add_epi32(ss2, mul32); + +#if CHAR_OFFSET != 0 + // s1 += 32*CHAR_OFFSET + __m128i char_offset_multiplier = _mm_set1_epi32(32 * CHAR_OFFSET); + ss1 = _mm_add_epi32(ss1, char_offset_multiplier); + + // s2 += 528*CHAR_OFFSET + char_offset_multiplier = _mm_set1_epi32(528 * CHAR_OFFSET); + ss2 = _mm_add_epi32(ss2, char_offset_multiplier); +#endif + } + + int32 x[4] = {0}; + _mm_store_si128((__m128i_u*)x, ss1); + s1 = x[0]; + _mm_store_si128((__m128i_u*)x, ss2); + s2 = x[0]; + } + for (; i < (len-4); i+=4) { + s2 += 4*(s1 + buf[i]) + 3*buf[i+1] + 2*buf[i+2] + buf[i+3] + 10*CHAR_OFFSET; + s1 += (buf[i] + buf[i+1] + buf[i+2] + buf[i+3] + 4*CHAR_OFFSET); + } + for (; i < len; i++) { + s1 += (buf[i]+CHAR_OFFSET); s2 += s1; + } + return (s1 & 0xffff) + (s2 << 16); +} + +/* + a simple 32 bit checksum that can be updated from either end + (inspired by Mark Adler's Adler-32 checksum) + */ +/* + Pure copy/paste from get_checksum1 @ checksum.c. We cannot use the target + attribute there as that requires cpp. + */ +__attribute__ ((target ("default"))) static inline uint32 get_checksum1_accel(char *buf1, int32 len) +{ + int32 i; + uint32 s1, s2; + schar *buf = (schar *)buf1; + + s1 = s2 = 0; + for (i = 0; i < (len-4); i+=4) { + s2 += 4*(s1 + buf[i]) + 3*buf[i+1] + 2*buf[i+2] + buf[i+3] + 10*CHAR_OFFSET; + s1 += (buf[i+0] + buf[i+1] + buf[i+2] + buf[i+3] + 4*CHAR_OFFSET); + } + for (; i < len; i++) { + s1 += (buf[i]+CHAR_OFFSET); s2 += s1; + } + return (s1 & 0xffff) + (s2 << 16); +} + +extern "C" { + +/* + C doesn't support the target attribute, so here's another wrapper +*/ +uint32 get_checksum1(char *buf1, int32 len) { + return get_checksum1_accel(buf1, len); +} + +} +#endif /* ENABLE_SSE2 */ +#endif /* __cplusplus */ +#endif /* __x86_64__ */ \ No newline at end of file diff --git a/configure.ac b/configure.ac index d4e95fb8..ff0c0902 100644 --- a/configure.ac +++ b/configure.ac @@ -41,6 +41,7 @@ fi dnl Checks for programs. AC_PROG_CC AC_PROG_CPP +AC_PROG_CXX AC_PROG_EGREP AC_PROG_INSTALL AC_PROG_MKDIR_P @@ -164,6 +165,27 @@ fi AC_DEFINE_UNQUOTED(NOBODY_USER, "nobody", [unprivileged user--e.g. nobody]) AC_DEFINE_UNQUOTED(NOBODY_GROUP, "$NOBODY_GROUP", [unprivileged group for unprivileged user]) +# SSE2+ optimizations on x86-64 require g++ support +AC_MSG_CHECKING([whether to enable SSE2+ optimizations]) +AC_ARG_ENABLE(sse2, + AS_HELP_STRING([--disable-sse2],[disable SSE2+ optimizations (req. g++ and x86-64)])) + +if test x"$enable_sse2" != x"no" && test x"$build_cpu" = x"x86_64" && test x"$CXX" = x"g++"; then + AC_MSG_RESULT([yes]) + AC_DEFINE(ENABLE_SSE2, 1, [Define to 1 to enable SSE2+ optimizations (requires g++ and x86-64)]) + CXXOBJ="$CXXOBJ checksum_sse2.o" +else + AC_MSG_RESULT(no) +fi + +# We only use g++ for its target attribute dispatching, disable unneeded bulky features +if test x"$CXXOBJ" != x""; then + CXXUSED=yes + CXXFLAGS="$CXXFLAGS -fno-exceptions -fno-rtti" +fi +AC_SUBST(CXXUSED) +AC_SUBST(CXXOBJ) + # arrgh. libc in some old debian version screwed up the largefile # stuff, getting byte range locking wrong AC_CACHE_CHECK([for broken largefile support],rsync_cv_HAVE_BROKEN_LARGEFILE,[ diff --git a/mkproto.awk b/mkproto.awk index ab97d54f..3a26eb51 100644 --- a/mkproto.awk +++ b/mkproto.awk @@ -3,6 +3,7 @@ BEGIN { while ((getline i < "proto.h") > 0) old_protos = old_protos ? old_protos "\n" i : i protos = "/* This file is automatically generated with \"make proto\". DO NOT EDIT */\n" + protos = protos "#ifndef __cplusplus\n" } inheader { @@ -34,6 +35,7 @@ inheader { } END { + protos = protos "\n\n" "#endif\n" if (old_protos != protos) print protos > "proto.h" printf "" > "proto.h-tstamp" }
Maybe Matching Threads
- [PATCH] SSE2/SSSE3 optimized version of get_checksum1() for x86-64
- [PATCH] SSE2/SSSE3 optimized version of get_checksum1() for x86-64
- [PATCH] SSE2/SSSE3 optimized version of get_checksum1() for x86-64
- [PATCH] SSE2/SSSE3 optimized version of get_checksum1() for x86-64
- [PATCH] SSE2/SSSE3 optimized version of get_checksum1() for x86-64