Hello,
This is documented behavior.
From R-intro, last line of section 1.8 [1].
Command lines entered at the console are limited4 to about 4095 bytes
(not characters).
The number 4 in limited4 is a footnote link:
some of the consoles will not allow you to enter more, and amongst those
which do some will silently discard the excess and some will use it as
the start of the next line.
Prof. Ripley called the r-devel mailing list's attention to this in
August 2006 when the limit was 1024 [2], it was then increased to the
current 4095. I remember seeing a limit of 2048 (?) but couldn't find where.
Try creating a file with your command as only content, then run
x <- readLines("rhelp.txt")
nchar(x)
# [1] 4096
You are above the limit by 1 byte.
Standard solutions are to break the command line, in your case into at
least 2 lines, or to source the command from file, like David proposed.
[1]
https://cran.r-project.org/doc/manuals/R-intro.html#R-commands_003b-case-sensitivity-etc
[2] https://stat.ethz.ch/pipermail/r-devel/2006-August/038985.html
Hope this helps,
Rui Barradas
?s 00:36 de 13/07/2022, core_contingency escreveu:> To Whom it May Concern,
>
> I am creating a vector with the base R function "c", with many
arguments
> as shown below:
>
> ???? $ R
> ???? > MES = c("A2M", "ABRACL", "ACADVL",
"ACAP2", "ACTA2", "ACTN1",
> "ADAM19", "ADAM9", "ADAMTS5",
"ADGRE5", "ADGRG6", "AEBP1", "AJUBA",
> "ALDH1A3", "AMMECR1", "ANTXR1",
"ANXA1", "ANXA2", "ANXA5", "ANXA6",
> "APOE", "APP", "ARHGAP1",
"ARHGEF40", "ARL1", "ARL4A", "ARMCX2",
> "ARPC1B", "ASPH", "ATP10D",
"ATP1B1", "ATP2B1", "ATP2B4",
"ATP6V0E1",
> "ATP8B2", "ATXN1", "B2M", "BAG3",
"BGN", "BMP5", "BNC2", "BOC",
> "BTN3A2", "C1orf198", "C1orf54",
"C4orf32", "C6orf120", "CALD1", "CALU",
> "CAPN2", "CAPN6", "CBFB", "CBLB",
"CCDC80", "CD164", "CD44", "CD59",
> "CD63", "CDH11", "CETN2", "CFH",
"CFI", "CILP", "CKAP4", "CLIC4",
> "CMTM3", "CMTM6", "CNN3",
"COL11A1", "COL12A1", "COL1A1",
"COL27A1",
> "COL3A1", "COL4A1", "COL4A2",
"COL5A1", "COL5A2", "COL6A1", "COL6A2",
> "COL6A3", "COPA", "CPED1", "CPS1",
"CRABP2", "CREB3L2", "CREG1",
> "CRELD2", "CRISPLD1", "CRTAP",
"CSRP1", "CTDSP2", "CTNNA1", "CTSB",
> "CTSC", "CTSO", "CXCL12", "CYBRD1",
"CYFIP1", "CYP26A1", "CYR61",
> "DCAF6", "DDOST", "DDR2", "DESI2",
"DKK3", "DLC1", "DLX1", "DLX2",
> "DMD", "DNAJC1", "DNAJC10",
"DNAJC3", "DNM3OS", "DPY19L1", "DSE",
> "DUSP14", "DUSP5", "DUSP6",
"EDEM1", "EDNRA", "EFEMP2", "EGFR",
"EGR1",
> "EGR3", "EHD2", "ELAVL1", "ELF1",
"ELK3", "ELK4", "EMILIN1", "EMP1",
> "ENAH", "EPHA3", "EPS8", "ERBIN",
"ERLIN1", "ERRFI1", "ETS1", "EVA1A",
> "EXT1", "EXTL2", "F2R", "F2RL2",
"FAM102B", "FAM114A1", "FAM120A",
> "FAM129A", "FAM3C", "FAM43A",
"FAM46A", "FAT1", "FBN1", "FBN2",
"FGFR1",
> "FIBIN", "FILIP1L", "FKBP14",
"FLNA", "FLRT2", "FMOD", "FN1",
"FNDC3B",
> "FSTL1", "FUCA2", "FZD1", "FZD2",
"FZD7", "GABRR1", "GALNT10", "GAS1",
> "GAS2", "GDF15", "GJA1", "GNAI1",
"GNG12", "GNS", "GORAB", "GPC6",
> "GPR137B", "GPX8", "GRN", "GSN",
"HES1", "HEXB", "HIBADH", "HIPK3",
> "HIST1H2AC", "HIST1H2BK", "HLA-A",
"HLA-B", "HLA-C", "HLA-F", "HLX",
> "HNMT", "HOMER1", "HS3ST3A1",
"HSP90B1", "HSPA5", "HSPB1", "HTRA1",
> "HYOU1", "ID1", "ID3", "IFI16",
"IFITM2", "IFITM3", "IGF2R", "IGFBP5",
> "IGFBP6", "IL13RA1", "IL6ST",
"INSIG1", "IQGAP2", "ITGA10", "ITGA4",
> "ITGAV", "ITGB1", "ITM2B", "ITM2C",
"ITPR1", "ITPRIPL2", "JAK1", "JAM3",
> "KANK2", "KCNK2", "KCTD12",
"KDELC2", "KDELR2", "KDELR3", "KDM5B",
> "KIAA1462", "KIF13A", "KIRREL",
"KLF10", "KLF4", "KLF6", "L3HYPDH",
> "LAMB1", "LAMC1", "LAMP1",
"LAPTM4A", "LASP1", "LATS2", "LEPROT",
> "LGALS1", "LHFP", "LHX8", "LIFR",
"LIPA", "LITAF", "LIX1L", "LMAN1",
> "LMNA", "LOXL2", "LPP", "LRP10",
"LRRC17", "LRRC8C", "LTBP1", "LUZP1",
> "MAGT1", "MAML2", "MAN2A1", "MANF",
"MBD2", "MBNL1", "MBTPS1", "MEOX1",
> "MEOX2", "MEST", "MGAT2", "MGP",
"MGST1", "MICAL2", "MMP2", "MOB1A",
> "MRC2", "MXRA5", "MYADM", "MYDGF",
"MYL12A", "MYL12B", "MYLIP", "NANS",
> "NBR1", "NEK7", "NES", "NFIA",
"NFIC", "NID1", "NID2", "NOTCH2",
> "NOTCH2NL", "NPC2", "NPTN", "NQO1",
"NR3C1", "NRP1", "OGFRL1",
> "OLFML2A", "OLFML2B", "OLFML3",
"OSTC", "P4HA1", "PALLD", "PAPSS2",
> "PCDH18", "PCOLCE2", "PCSK5",
"PDE3A", "PDE7B", "PDGFC", "PDIA3",
> "PDIA4", "PDIA6", "PDLIM1",
"PEA15", "PEAK1", "PHLDA3", "PHLDB2",
> "PHTF2", "PIAS3", "PLAGL1",
"PLEKHA2", "PLEKHH2", "PLK2", "PLOD2",
> "PLOD3", "PLPP1", "PLS3", "PLSCR1",
"PLSCR4", "PLXDC2", "POLR2L",
> "PON2", "POSTN", "PPIB", "PPIC",
"PPT1", "PRCP", "PRDM6", "PRDX4",
> "PRDX6", "PROM1", "PRRX1", "PTBP1",
"PTGER4", "PTGFRN", "PTN", "PTPN14",
> "PTPRG", "PTPRK", "PTRF", "PXDC1",
"PXDN", "PYGL", "QKI", "QSOX1",
> "RAB13", "RAB29", "RAB31", "RAP1A",
"RAP1B", "RBMS1", "RCN1", "RECK",
> "REST", "RGL1", "RGS10", "RGS3",
"RHOC", "RHOJ", "RIN2", "RIT1",
> "RNFT1", "RNH1", "ROBO1", "ROR1",
"RRBP1", "S1PR3", "SASH1", "SCPEP1",
> "SCRG1", "SDC2", "SDC4", "SDCBP",
"SDF4", "SEC14L1", "SEL1L3", "SEMA3C",
> "SEMA3F", "SEPT10", "SERPINE2",
"SERPINH1", "SFT2D1", "SFT2D2", "SGK1",
> "SH3BGRL", "SHC1", "SHROOM3",
"SIX1", "SIX4", "SKIL", "SLC16A4",
> "SLC30A1", "SLC30A7", "SLC35F5",
"SLC38A2", "SLC38A6", "SLC39A14",
> "SMAD3", "SNAI2", "SNAP23",
"SOSTDC1", "SOX9", "SPARC", "SPARCL1",
> "SPATA20", "SPCS3", "SPRED1",
"SPRY1", "SPRY4", "SPRY4-IT1", "SQSTM1",
> "SRPX", "SSBP4", "SSR1", "SSR3",
"STAT1", "STAT3", "STEAP1", "STK38L",
> "SUCLG2", "SURF4", "SVIL", "SYDE1",
"SYNJ2", "SYPL1", "TCF7L2", "TFE3",
> "TFPI", "TGFB1I1", "TGFBR2",
"THBS1", "TIMP1", "TJP1")
> ???? +
>
> For some reason, the R console does not display a ">" symbol,
indicating
> that it has completed the function, but displays a "+" symbol
instead,
> which indicates that the function is still waiting for more input.
> However, I believe that my syntax is correct. If I shorten my command by
> a few characters by removing the last entry, "TJP1":
>
> ???? $ R
> ???? > MES = c("A2M", "ABRACL", "ACADVL",
"ACAP2", "ACTA2", "ACTN1",
> "ADAM19", "ADAM9", "ADAMTS5",
"ADGRE5", "ADGRG6", "AEBP1", "AJUBA",
> "ALDH1A3", "AMMECR1", "ANTXR1",
"ANXA1", "ANXA2", "ANXA5", "ANXA6",
> "APOE", "APP", "ARHGAP1",
"ARHGEF40", "ARL1", "ARL4A", "ARMCX2",
> "ARPC1B", "ASPH", "ATP10D",
"ATP1B1", "ATP2B1", "ATP2B4",
"ATP6V0E1",
> "ATP8B2", "ATXN1", "B2M", "BAG3",
"BGN", "BMP5", "BNC2", "BOC",
> "BTN3A2", "C1orf198", "C1orf54",
"C4orf32", "C6orf120", "CALD1", "CALU",
> "CAPN2", "CAPN6", "CBFB", "CBLB",
"CCDC80", "CD164", "CD44", "CD59",
> "CD63", "CDH11", "CETN2", "CFH",
"CFI", "CILP", "CKAP4", "CLIC4",
> "CMTM3", "CMTM6", "CNN3",
"COL11A1", "COL12A1", "COL1A1",
"COL27A1",
> "COL3A1", "COL4A1", "COL4A2",
"COL5A1", "COL5A2", "COL6A1", "COL6A2",
> "COL6A3", "COPA", "CPED1", "CPS1",
"CRABP2", "CREB3L2", "CREG1",
> "CRELD2", "CRISPLD1", "CRTAP",
"CSRP1", "CTDSP2", "CTNNA1", "CTSB",
> "CTSC", "CTSO", "CXCL12", "CYBRD1",
"CYFIP1", "CYP26A1", "CYR61",
> "DCAF6", "DDOST", "DDR2", "DESI2",
"DKK3", "DLC1", "DLX1", "DLX2",
> "DMD", "DNAJC1", "DNAJC10",
"DNAJC3", "DNM3OS", "DPY19L1", "DSE",
> "DUSP14", "DUSP5", "DUSP6",
"EDEM1", "EDNRA", "EFEMP2", "EGFR",
"EGR1",
> "EGR3", "EHD2", "ELAVL1", "ELF1",
"ELK3", "ELK4", "EMILIN1", "EMP1",
> "ENAH", "EPHA3", "EPS8", "ERBIN",
"ERLIN1", "ERRFI1", "ETS1", "EVA1A",
> "EXT1", "EXTL2", "F2R", "F2RL2",
"FAM102B", "FAM114A1", "FAM120A",
> "FAM129A", "FAM3C", "FAM43A",
"FAM46A", "FAT1", "FBN1", "FBN2",
"FGFR1",
> "FIBIN", "FILIP1L", "FKBP14",
"FLNA", "FLRT2", "FMOD", "FN1",
"FNDC3B",
> "FSTL1", "FUCA2", "FZD1", "FZD2",
"FZD7", "GABRR1", "GALNT10", "GAS1",
> "GAS2", "GDF15", "GJA1", "GNAI1",
"GNG12", "GNS", "GORAB", "GPC6",
> "GPR137B", "GPX8", "GRN", "GSN",
"HES1", "HEXB", "HIBADH", "HIPK3",
> "HIST1H2AC", "HIST1H2BK", "HLA-A",
"HLA-B", "HLA-C", "HLA-F", "HLX",
> "HNMT", "HOMER1", "HS3ST3A1",
"HSP90B1", "HSPA5", "HSPB1", "HTRA1",
> "HYOU1", "ID1", "ID3", "IFI16",
"IFITM2", "IFITM3", "IGF2R", "IGFBP5",
> "IGFBP6", "IL13RA1", "IL6ST",
"INSIG1", "IQGAP2", "ITGA10", "ITGA4",
> "ITGAV", "ITGB1", "ITM2B", "ITM2C",
"ITPR1", "ITPRIPL2", "JAK1", "JAM3",
> "KANK2", "KCNK2", "KCTD12",
"KDELC2", "KDELR2", "KDELR3", "KDM5B",
> "KIAA1462", "KIF13A", "KIRREL",
"KLF10", "KLF4", "KLF6", "L3HYPDH",
> "LAMB1", "LAMC1", "LAMP1",
"LAPTM4A", "LASP1", "LATS2", "LEPROT",
> "LGALS1", "LHFP", "LHX8", "LIFR",
"LIPA", "LITAF", "LIX1L", "LMAN1",
> "LMNA", "LOXL2", "LPP", "LRP10",
"LRRC17", "LRRC8C", "LTBP1", "LUZP1",
> "MAGT1", "MAML2", "MAN2A1", "MANF",
"MBD2", "MBNL1", "MBTPS1", "MEOX1",
> "MEOX2", "MEST", "MGAT2", "MGP",
"MGST1", "MICAL2", "MMP2", "MOB1A",
> "MRC2", "MXRA5", "MYADM", "MYDGF",
"MYL12A", "MYL12B", "MYLIP", "NANS",
> "NBR1", "NEK7", "NES", "NFIA",
"NFIC", "NID1", "NID2", "NOTCH2",
> "NOTCH2NL", "NPC2", "NPTN", "NQO1",
"NR3C1", "NRP1", "OGFRL1",
> "OLFML2A", "OLFML2B", "OLFML3",
"OSTC", "P4HA1", "PALLD", "PAPSS2",
> "PCDH18", "PCOLCE2", "PCSK5",
"PDE3A", "PDE7B", "PDGFC", "PDIA3",
> "PDIA4", "PDIA6", "PDLIM1",
"PEA15", "PEAK1", "PHLDA3", "PHLDB2",
> "PHTF2", "PIAS3", "PLAGL1",
"PLEKHA2", "PLEKHH2", "PLK2", "PLOD2",
> "PLOD3", "PLPP1", "PLS3", "PLSCR1",
"PLSCR4", "PLXDC2", "POLR2L",
> "PON2", "POSTN", "PPIB", "PPIC",
"PPT1", "PRCP", "PRDM6", "PRDX4",
> "PRDX6", "PROM1", "PRRX1", "PTBP1",
"PTGER4", "PTGFRN", "PTN", "PTPN14",
> "PTPRG", "PTPRK", "PTRF", "PXDC1",
"PXDN", "PYGL", "QKI", "QSOX1",
> "RAB13", "RAB29", "RAB31", "RAP1A",
"RAP1B", "RBMS1", "RCN1", "RECK",
> "REST", "RGL1", "RGS10", "RGS3",
"RHOC", "RHOJ", "RIN2", "RIT1",
> "RNFT1", "RNH1", "ROBO1", "ROR1",
"RRBP1", "S1PR3", "SASH1", "SCPEP1",
> "SCRG1", "SDC2", "SDC4", "SDCBP",
"SDF4", "SEC14L1", "SEL1L3", "SEMA3C",
> "SEMA3F", "SEPT10", "SERPINE2",
"SERPINH1", "SFT2D1", "SFT2D2", "SGK1",
> "SH3BGRL", "SHC1", "SHROOM3",
"SIX1", "SIX4", "SKIL", "SLC16A4",
> "SLC30A1", "SLC30A7", "SLC35F5",
"SLC38A2", "SLC38A6", "SLC39A14",
> "SMAD3", "SNAI2", "SNAP23",
"SOSTDC1", "SOX9", "SPARC", "SPARCL1",
> "SPATA20", "SPCS3", "SPRED1",
"SPRY1", "SPRY4", "SPRY4-IT1", "SQSTM1",
> "SRPX", "SSBP4", "SSR1", "SSR3",
"STAT1", "STAT3", "STEAP1", "STK38L",
> "SUCLG2", "SURF4", "SVIL", "SYDE1",
"SYNJ2", "SYPL1", "TCF7L2", "TFE3",
> "TFPI", "TGFB1I1", "TGFBR2",
"THBS1", "TIMP1")
> ???? >
>
> The function now works, and returns a ">" symbol, indicating
that the
> function completed successfully. The ls() function proves it:
>
> ???? $ R
> ???? > ls()
> ???? [1] "MES"
>
> Is this a bug in the base R "c" function? It seems like the
"c" function
> can only accept so many characters before it fails.
>
> Thank you for your time,
> core_contingency
>
>
> ______________________________________________
> R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
Ebert,Timothy Aaron
2022-Jul-13 13:20 UTC
[R] Does the function "c" have a character limit?
The limits to the size of vectors, matrices, data frames, lists, or other data
structure does not have a simple answer.
1) 2^31 - 1 is the maximum number of rows.
https://stackoverflow.com/questions/5233769/practical-limits-of-r-data-frame#:~:text=The%20number%20is%202%5E31,start%20collecting%20several%20of%20them.
2) help(Memory) suggests that the default limit for all variables is 6 Mb. The
help page tells you how to change this.
Neither of these two factors have any bearing on this problem except that your
vector is not close to these limits.
I got the same result you did when I entered your vector into my system (R 4.2
in RStudio, on 64 bit Windows). I shortened it by removing the first entry and
it works.
I can copy the entire line into Microsoft Word, and count the number of
characters (including spaces) and I get 4089. There were seven characters in the
first entry including the comma and space. If I add seven spaces between MES and
the equal sign I get the original outcome. So the limit is on the number of
characters in the line. You can get more entries by shortening each entry, or
fewer if each entry was longer.
As others have suggested, I would break the line into two pieces and then
combine the pieces.
Tim
-----Original Message-----
From: R-help <r-help-bounces at r-project.org> On Behalf Of Rui Barradas
Sent: Wednesday, July 13, 2022 6:36 AM
To: core_contingency <ccontingency at gmail.com>; r-help at r-project.org
Subject: Re: [R] Does the function "c" have a character limit?
[External Email]
Hello,
This is documented behavior.
From R-intro, last line of section 1.8 [1].
Command lines entered at the console are limited4 to about 4095 bytes (not
characters).
The number 4 in limited4 is a footnote link:
some of the consoles will not allow you to enter more, and amongst those which
do some will silently discard the excess and some will use it as the start of
the next line.
Prof. Ripley called the r-devel mailing list's attention to this in August
2006 when the limit was 1024 [2], it was then increased to the current 4095. I
remember seeing a limit of 2048 (?) but couldn't find where.
Try creating a file with your command as only content, then run
x <- readLines("rhelp.txt")
nchar(x)
# [1] 4096
You are above the limit by 1 byte.
Standard solutions are to break the command line, in your case into at least 2
lines, or to source the command from file, like David proposed.
[1]
https://urldefense.proofpoint.com/v2/url?u=https-3A__cran.r-2Dproject.org_doc_manuals_R-2Dintro.html-23R-2Dcommands-5F003b-2Dcase-2Dsensitivity-2Detc&d=DwIDaQ&c=sJ6xIWYx-zLMB3EPkvcnVg&r=9PEhQh2kVeAsRzsn7AkP-g&m=bDsMNmn2OhMbQIvptul8Yl752vW7YkxJ0v91xFMGuYQo9NsNdzAp5k0CD2XzMc9x&s=g5cbrpfyHaIN9sXycd_-f2iDsOcbuzLe2u3KjvQNm-0&e[2]
https://urldefense.proofpoint.com/v2/url?u=https-3A__stat.ethz.ch_pipermail_r-2Ddevel_2006-2DAugust_038985.html&d=DwIDaQ&c=sJ6xIWYx-zLMB3EPkvcnVg&r=9PEhQh2kVeAsRzsn7AkP-g&m=bDsMNmn2OhMbQIvptul8Yl752vW7YkxJ0v91xFMGuYQo9NsNdzAp5k0CD2XzMc9x&s=B1YSca31vHlpy9WJG8o0MBTh7bX4v7M61eWfQ4tmdog&e
Hope this helps,
Rui Barradas
?s 00:36 de 13/07/2022, core_contingency escreveu:> To Whom it May Concern,
>
> I am creating a vector with the base R function "c", with many
> arguments as shown below:
>
> $ R
> > MES = c("A2M", "ABRACL", "ACADVL",
"ACAP2", "ACTA2", "ACTN1",
> "ADAM19", "ADAM9", "ADAMTS5",
"ADGRE5", "ADGRG6", "AEBP1", "AJUBA",
> "ALDH1A3", "AMMECR1", "ANTXR1",
"ANXA1", "ANXA2", "ANXA5", "ANXA6",
> "APOE", "APP", "ARHGAP1",
"ARHGEF40", "ARL1", "ARL4A", "ARMCX2",
> "ARPC1B", "ASPH", "ATP10D",
"ATP1B1", "ATP2B1", "ATP2B4",
"ATP6V0E1",
> "ATP8B2", "ATXN1", "B2M", "BAG3",
"BGN", "BMP5", "BNC2", "BOC",
> "BTN3A2", "C1orf198", "C1orf54",
"C4orf32", "C6orf120", "CALD1",
> "CALU", "CAPN2", "CAPN6", "CBFB",
"CBLB", "CCDC80", "CD164", "CD44",
> "CD59", "CD63", "CDH11", "CETN2",
"CFH", "CFI", "CILP", "CKAP4",
> "CLIC4", "CMTM3", "CMTM6", "CNN3",
"COL11A1", "COL12A1", "COL1A1",
> "COL27A1", "COL3A1", "COL4A1",
"COL4A2", "COL5A1", "COL5A2", "COL6A1",
> "COL6A2", "COL6A3", "COPA",
"CPED1", "CPS1", "CRABP2", "CREB3L2",
> "CREG1", "CRELD2", "CRISPLD1",
"CRTAP", "CSRP1", "CTDSP2", "CTNNA1",
> "CTSB", "CTSC", "CTSO", "CXCL12",
"CYBRD1", "CYFIP1", "CYP26A1",
> "CYR61", "DCAF6", "DDOST", "DDR2",
"DESI2", "DKK3", "DLC1", "DLX1",
> "DLX2", "DMD", "DNAJC1", "DNAJC10",
"DNAJC3", "DNM3OS", "DPY19L1",
> "DSE", "DUSP14", "DUSP5", "DUSP6",
"EDEM1", "EDNRA", "EFEMP2", "EGFR",
> "EGR1", "EGR3", "EHD2", "ELAVL1",
"ELF1", "ELK3", "ELK4", "EMILIN1",
> "EMP1", "ENAH", "EPHA3", "EPS8",
"ERBIN", "ERLIN1", "ERRFI1", "ETS1",
> "EVA1A", "EXT1", "EXTL2", "F2R",
"F2RL2", "FAM102B", "FAM114A1",
> "FAM120A", "FAM129A", "FAM3C",
"FAM43A", "FAM46A", "FAT1", "FBN1",
> "FBN2", "FGFR1", "FIBIN",
"FILIP1L", "FKBP14", "FLNA", "FLRT2",
> "FMOD", "FN1", "FNDC3B", "FSTL1",
"FUCA2", "FZD1", "FZD2", "FZD7",
> "GABRR1", "GALNT10", "GAS1",
"GAS2", "GDF15", "GJA1", "GNAI1",
> "GNG12", "GNS", "GORAB", "GPC6",
"GPR137B", "GPX8", "GRN", "GSN",
> "HES1", "HEXB", "HIBADH", "HIPK3",
"HIST1H2AC", "HIST1H2BK", "HLA-A",
> "HLA-B", "HLA-C", "HLA-F", "HLX",
"HNMT", "HOMER1", "HS3ST3A1",
> "HSP90B1", "HSPA5", "HSPB1",
"HTRA1", "HYOU1", "ID1", "ID3",
"IFI16",
> "IFITM2", "IFITM3", "IGF2R",
"IGFBP5", "IGFBP6", "IL13RA1", "IL6ST",
> "INSIG1", "IQGAP2", "ITGA10",
"ITGA4", "ITGAV", "ITGB1", "ITM2B",
> "ITM2C", "ITPR1", "ITPRIPL2",
"JAK1", "JAM3", "KANK2", "KCNK2",
> "KCTD12", "KDELC2", "KDELR2",
"KDELR3", "KDM5B", "KIAA1462", "KIF13A",
> "KIRREL", "KLF10", "KLF4", "KLF6",
"L3HYPDH", "LAMB1", "LAMC1",
> "LAMP1", "LAPTM4A", "LASP1",
"LATS2", "LEPROT", "LGALS1", "LHFP",
> "LHX8", "LIFR", "LIPA", "LITAF",
"LIX1L", "LMAN1", "LMNA", "LOXL2",
> "LPP", "LRP10", "LRRC17", "LRRC8C",
"LTBP1", "LUZP1", "MAGT1",
> "MAML2", "MAN2A1", "MANF", "MBD2",
"MBNL1", "MBTPS1", "MEOX1",
> "MEOX2", "MEST", "MGAT2", "MGP",
"MGST1", "MICAL2", "MMP2", "MOB1A",
> "MRC2", "MXRA5", "MYADM", "MYDGF",
"MYL12A", "MYL12B", "MYLIP",
> "NANS", "NBR1", "NEK7", "NES",
"NFIA", "NFIC", "NID1", "NID2",
> "NOTCH2", "NOTCH2NL", "NPC2",
"NPTN", "NQO1", "NR3C1", "NRP1",
> "OGFRL1", "OLFML2A", "OLFML2B",
"OLFML3", "OSTC", "P4HA1", "PALLD",
> "PAPSS2", "PCDH18", "PCOLCE2",
"PCSK5", "PDE3A", "PDE7B", "PDGFC",
> "PDIA3", "PDIA4", "PDIA6",
"PDLIM1", "PEA15", "PEAK1", "PHLDA3",
> "PHLDB2", "PHTF2", "PIAS3",
"PLAGL1", "PLEKHA2", "PLEKHH2", "PLK2",
> "PLOD2", "PLOD3", "PLPP1", "PLS3",
"PLSCR1", "PLSCR4", "PLXDC2",
> "POLR2L", "PON2", "POSTN", "PPIB",
"PPIC", "PPT1", "PRCP", "PRDM6",
> "PRDX4", "PRDX6", "PROM1", "PRRX1",
"PTBP1", "PTGER4", "PTGFRN",
> "PTN", "PTPN14", "PTPRG", "PTPRK",
"PTRF", "PXDC1", "PXDN", "PYGL",
> "QKI", "QSOX1", "RAB13", "RAB29",
"RAB31", "RAP1A", "RAP1B", "RBMS1",
> "RCN1", "RECK", "REST", "RGL1",
"RGS10", "RGS3", "RHOC", "RHOJ",
> "RIN2", "RIT1", "RNFT1", "RNH1",
"ROBO1", "ROR1", "RRBP1", "S1PR3",
> "SASH1", "SCPEP1", "SCRG1", "SDC2",
"SDC4", "SDCBP", "SDF4",
> "SEC14L1", "SEL1L3", "SEMA3C",
"SEMA3F", "SEPT10", "SERPINE2",
> "SERPINH1", "SFT2D1", "SFT2D2",
"SGK1", "SH3BGRL", "SHC1", "SHROOM3",
> "SIX1", "SIX4", "SKIL", "SLC16A4",
"SLC30A1", "SLC30A7", "SLC35F5",
> "SLC38A2", "SLC38A6", "SLC39A14",
"SMAD3", "SNAI2", "SNAP23",
> "SOSTDC1", "SOX9", "SPARC",
"SPARCL1", "SPATA20", "SPCS3", "SPRED1",
> "SPRY1", "SPRY4", "SPRY4-IT1",
"SQSTM1", "SRPX", "SSBP4", "SSR1",
> "SSR3", "STAT1", "STAT3", "STEAP1",
"STK38L", "SUCLG2", "SURF4", "SVIL",
"SYDE1", "SYNJ2", "SYPL1", "TCF7L2",
"TFE3", "TFPI", "TGFB1I1", "TGFBR2",
"THBS1", "TIMP1", "TJP1")
> +
>
> For some reason, the R console does not display a ">" symbol,
> indicating that it has completed the function, but displays a "+"
> symbol instead, which indicates that the function is still waiting for more
input.
> However, I believe that my syntax is correct. If I shorten my command
> by a few characters by removing the last entry, "TJP1":
>
> $ R
> > MES = c("A2M", "ABRACL", "ACADVL",
"ACAP2", "ACTA2", "ACTN1",
> "ADAM19", "ADAM9", "ADAMTS5",
"ADGRE5", "ADGRG6", "AEBP1", "AJUBA",
> "ALDH1A3", "AMMECR1", "ANTXR1",
"ANXA1", "ANXA2", "ANXA5", "ANXA6",
> "APOE", "APP", "ARHGAP1",
"ARHGEF40", "ARL1", "ARL4A", "ARMCX2",
> "ARPC1B", "ASPH", "ATP10D",
"ATP1B1", "ATP2B1", "ATP2B4",
"ATP6V0E1",
> "ATP8B2", "ATXN1", "B2M", "BAG3",
"BGN", "BMP5", "BNC2", "BOC",
> "BTN3A2", "C1orf198", "C1orf54",
"C4orf32", "C6orf120", "CALD1",
> "CALU", "CAPN2", "CAPN6", "CBFB",
"CBLB", "CCDC80", "CD164", "CD44",
> "CD59", "CD63", "CDH11", "CETN2",
"CFH", "CFI", "CILP", "CKAP4",
> "CLIC4", "CMTM3", "CMTM6", "CNN3",
"COL11A1", "COL12A1", "COL1A1",
> "COL27A1", "COL3A1", "COL4A1",
"COL4A2", "COL5A1", "COL5A2", "COL6A1",
> "COL6A2", "COL6A3", "COPA",
"CPED1", "CPS1", "CRABP2", "CREB3L2",
> "CREG1", "CRELD2", "CRISPLD1",
"CRTAP", "CSRP1", "CTDSP2", "CTNNA1",
> "CTSB", "CTSC", "CTSO", "CXCL12",
"CYBRD1", "CYFIP1", "CYP26A1",
> "CYR61", "DCAF6", "DDOST", "DDR2",
"DESI2", "DKK3", "DLC1", "DLX1",
> "DLX2", "DMD", "DNAJC1", "DNAJC10",
"DNAJC3", "DNM3OS", "DPY19L1",
> "DSE", "DUSP14", "DUSP5", "DUSP6",
"EDEM1", "EDNRA", "EFEMP2", "EGFR",
> "EGR1", "EGR3", "EHD2", "ELAVL1",
"ELF1", "ELK3", "ELK4", "EMILIN1",
> "EMP1", "ENAH", "EPHA3", "EPS8",
"ERBIN", "ERLIN1", "ERRFI1", "ETS1",
> "EVA1A", "EXT1", "EXTL2", "F2R",
"F2RL2", "FAM102B", "FAM114A1",
> "FAM120A", "FAM129A", "FAM3C",
"FAM43A", "FAM46A", "FAT1", "FBN1",
> "FBN2", "FGFR1", "FIBIN",
"FILIP1L", "FKBP14", "FLNA", "FLRT2",
> "FMOD", "FN1", "FNDC3B", "FSTL1",
"FUCA2", "FZD1", "FZD2", "FZD7",
> "GABRR1", "GALNT10", "GAS1",
"GAS2", "GDF15", "GJA1", "GNAI1",
> "GNG12", "GNS", "GORAB", "GPC6",
"GPR137B", "GPX8", "GRN", "GSN",
> "HES1", "HEXB", "HIBADH", "HIPK3",
"HIST1H2AC", "HIST1H2BK", "HLA-A",
> "HLA-B", "HLA-C", "HLA-F", "HLX",
"HNMT", "HOMER1", "HS3ST3A1",
> "HSP90B1", "HSPA5", "HSPB1",
"HTRA1", "HYOU1", "ID1", "ID3",
"IFI16",
> "IFITM2", "IFITM3", "IGF2R",
"IGFBP5", "IGFBP6", "IL13RA1", "IL6ST",
> "INSIG1", "IQGAP2", "ITGA10",
"ITGA4", "ITGAV", "ITGB1", "ITM2B",
> "ITM2C", "ITPR1", "ITPRIPL2",
"JAK1", "JAM3", "KANK2", "KCNK2",
> "KCTD12", "KDELC2", "KDELR2",
"KDELR3", "KDM5B", "KIAA1462", "KIF13A",
> "KIRREL", "KLF10", "KLF4", "KLF6",
"L3HYPDH", "LAMB1", "LAMC1",
> "LAMP1", "LAPTM4A", "LASP1",
"LATS2", "LEPROT", "LGALS1", "LHFP",
> "LHX8", "LIFR", "LIPA", "LITAF",
"LIX1L", "LMAN1", "LMNA", "LOXL2",
> "LPP", "LRP10", "LRRC17", "LRRC8C",
"LTBP1", "LUZP1", "MAGT1",
> "MAML2", "MAN2A1", "MANF", "MBD2",
"MBNL1", "MBTPS1", "MEOX1",
> "MEOX2", "MEST", "MGAT2", "MGP",
"MGST1", "MICAL2", "MMP2", "MOB1A",
> "MRC2", "MXRA5", "MYADM", "MYDGF",
"MYL12A", "MYL12B", "MYLIP",
> "NANS", "NBR1", "NEK7", "NES",
"NFIA", "NFIC", "NID1", "NID2",
> "NOTCH2", "NOTCH2NL", "NPC2",
"NPTN", "NQO1", "NR3C1", "NRP1",
> "OGFRL1", "OLFML2A", "OLFML2B",
"OLFML3", "OSTC", "P4HA1", "PALLD",
> "PAPSS2", "PCDH18", "PCOLCE2",
"PCSK5", "PDE3A", "PDE7B", "PDGFC",
> "PDIA3", "PDIA4", "PDIA6",
"PDLIM1", "PEA15", "PEAK1", "PHLDA3",
> "PHLDB2", "PHTF2", "PIAS3",
"PLAGL1", "PLEKHA2", "PLEKHH2", "PLK2",
> "PLOD2", "PLOD3", "PLPP1", "PLS3",
"PLSCR1", "PLSCR4", "PLXDC2",
> "POLR2L", "PON2", "POSTN", "PPIB",
"PPIC", "PPT1", "PRCP", "PRDM6",
> "PRDX4", "PRDX6", "PROM1", "PRRX1",
"PTBP1", "PTGER4", "PTGFRN",
> "PTN", "PTPN14", "PTPRG", "PTPRK",
"PTRF", "PXDC1", "PXDN", "PYGL",
> "QKI", "QSOX1", "RAB13", "RAB29",
"RAB31", "RAP1A", "RAP1B", "RBMS1",
> "RCN1", "RECK", "REST", "RGL1",
"RGS10", "RGS3", "RHOC", "RHOJ",
> "RIN2", "RIT1", "RNFT1", "RNH1",
"ROBO1", "ROR1", "RRBP1", "S1PR3",
> "SASH1", "SCPEP1", "SCRG1", "SDC2",
"SDC4", "SDCBP", "SDF4",
> "SEC14L1", "SEL1L3", "SEMA3C",
"SEMA3F", "SEPT10", "SERPINE2",
> "SERPINH1", "SFT2D1", "SFT2D2",
"SGK1", "SH3BGRL", "SHC1", "SHROOM3",
> "SIX1", "SIX4", "SKIL", "SLC16A4",
"SLC30A1", "SLC30A7", "SLC35F5",
> "SLC38A2", "SLC38A6", "SLC39A14",
"SMAD3", "SNAI2", "SNAP23",
> "SOSTDC1", "SOX9", "SPARC",
"SPARCL1", "SPATA20", "SPCS3", "SPRED1",
> "SPRY1", "SPRY4", "SPRY4-IT1",
"SQSTM1", "SRPX", "SSBP4", "SSR1",
> "SSR3", "STAT1", "STAT3", "STEAP1",
"STK38L", "SUCLG2", "SURF4", "SVIL",
"SYDE1", "SYNJ2", "SYPL1", "TCF7L2",
"TFE3", "TFPI", "TGFB1I1", "TGFBR2",
"THBS1", "TIMP1")
> >
>
> The function now works, and returns a ">" symbol, indicating
that the
> function completed successfully. The ls() function proves it:
>
> $ R
> > ls()
> [1] "MES"
>
> Is this a bug in the base R "c" function? It seems like the
"c"
> function can only accept so many characters before it fails.
>
> Thank you for your time,
> core_contingency
>
>
> ______________________________________________
> R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
> https://urldefense.proofpoint.com/v2/url?u=https-3A__stat.ethz.ch_mail
>
man_listinfo_r-2Dhelp&d=DwIDaQ&c=sJ6xIWYx-zLMB3EPkvcnVg&r=9PEhQh2kVeAs
> Rzsn7AkP-g&m=bDsMNmn2OhMbQIvptul8Yl752vW7YkxJ0v91xFMGuYQo9NsNdzAp5k0CD
> 2XzMc9x&s=x5SJbPFsoqRiJYh7Y5B0QDKio2Wy4Je38lBBi99AbAE&e> PLEASE
do read the posting guide
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.R-2Dproject.or
>
g_posting-2Dguide.html&d=DwIDaQ&c=sJ6xIWYx-zLMB3EPkvcnVg&r=9PEhQh2kVeA
> sRzsn7AkP-g&m=bDsMNmn2OhMbQIvptul8Yl752vW7YkxJ0v91xFMGuYQo9NsNdzAp5k0C
> D2XzMc9x&s=lCG5D1ItMs8G_wkshvm4nBaVq4Ehy_zyq5mnp2zpt2Y&e> and
provide commented, minimal, self-contained, reproducible code.
______________________________________________
R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
https://urldefense.proofpoint.com/v2/url?u=https-3A__stat.ethz.ch_mailman_listinfo_r-2Dhelp&d=DwIDaQ&c=sJ6xIWYx-zLMB3EPkvcnVg&r=9PEhQh2kVeAsRzsn7AkP-g&m=bDsMNmn2OhMbQIvptul8Yl752vW7YkxJ0v91xFMGuYQo9NsNdzAp5k0CD2XzMc9x&s=x5SJbPFsoqRiJYh7Y5B0QDKio2Wy4Je38lBBi99AbAE&ePLEASE
do read the posting guide
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.R-2Dproject.org_posting-2Dguide.html&d=DwIDaQ&c=sJ6xIWYx-zLMB3EPkvcnVg&r=9PEhQh2kVeAsRzsn7AkP-g&m=bDsMNmn2OhMbQIvptul8Yl752vW7YkxJ0v91xFMGuYQo9NsNdzAp5k0CD2XzMc9x&s=lCG5D1ItMs8G_wkshvm4nBaVq4Ehy_zyq5mnp2zpt2Y&eand
provide commented, minimal, self-contained, reproducible code.