Dear Toufik,
You've already had a suggestion to check whether RcmdrMisc is installed. It
should have been installed automatically when you installed the Rcmdr package.
If RcmdrMisc is installed, see whether you can load it directly via the command
library(RcmdrMisc). If that too fails, you could try reinstalling RcmdrMisc via
install.packages("RcmdrMisc").
Finally, you're using an old version of R. You might try installing the
current version, which is 3.6.2. Then install the Rcmdr package by
install.packages("Rcmdr").
I hope this helps,
John
-----------------------------------------------------------------
John Fox
Professor Emeritus
McMaster University
Hamilton, Ontario, Canada
Web: https://socialsciences.mcmaster.ca/jfox/
> -----Original Message-----
> From: R-help <r-help-bounces at r-project.org> On Behalf Of tzahaf
> Sent: Monday, January 6, 2020 8:16 AM
> To: r-help at r-project.org
> Subject: [R] issue with Rcmdr
>
> Dear
>
> I have a problem when trying to use Rcmdr. This is the msg I receive:
>
>
> package ?Rcmdr? successfully unpacked and MD5 sums checked
>
> The downloaded binary packages are in
>
> C:\Users\toufiz00\AppData\Local\Temp\RtmpgXuxDP\downloaded_packages
> > local({pkg <- select.list(sort(.packages(all.available > >
TRUE)),graphics=TRUE)
> + if(nchar(pkg)) library(pkg, character.only=TRUE)})
> Loading required package: RcmdrMisc
> Error: package or namespace load failed for ?RcmdrMisc? in rbind(info,
> getNamespaceInfo(env, "S3methods")):
> number of columns of matrices must match (see arg 2)
> Error: package ?RcmdrMisc? could not be loaded
> >
>
> I am running R 3.5.3 on WIN 10
>
> thanks for your help
>
> Best
>
> Toufik
>
> ______________________________________________
> R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-
> guide.html
> and provide commented, minimal, self-contained, reproducible code.
That version of R happens to be "current" if using MRAN... which has some benefits (MKL comes pre-configured) and some... ah... "philosophical" ideas about stability (uses checkpoint package out of the box... which freezes packages at 2019-04-15 UTC unless actions are taken to use a different snapshot [1]). The OP may be "stuck in time" at Rcmdr 2.5-2 if they have not invoked checkpoint or adjusted the "repos" option... and if the latter then they may be encountering package incompatibilities with R 3.5.3 that should have been caught with a minimum R-version spec in the Rcmdr package. [1] https://mran.microsoft.com/documents/rro/reproducibility On January 6, 2020 10:20:04 AM PST, "Fox, John" <jfox at mcmaster.ca> wrote:>Dear Toufik, > >You've already had a suggestion to check whether RcmdrMisc is >installed. It should have been installed automatically when you >installed the Rcmdr package. > >If RcmdrMisc is installed, see whether you can load it directly via the >command library(RcmdrMisc). If that too fails, you could try >reinstalling RcmdrMisc via install.packages("RcmdrMisc"). > >Finally, you're using an old version of R. You might try installing the >current version, which is 3.6.2. Then install the Rcmdr package by >install.packages("Rcmdr"). > >I hope this helps, > John > >----------------------------------------------------------------- >John Fox >Professor Emeritus >McMaster University >Hamilton, Ontario, Canada >Web: https://socialsciences.mcmaster.ca/jfox/ > > > >> -----Original Message----- >> From: R-help <r-help-bounces at r-project.org> On Behalf Of tzahaf >> Sent: Monday, January 6, 2020 8:16 AM >> To: r-help at r-project.org >> Subject: [R] issue with Rcmdr >> >> Dear >> >> I have a problem when trying to use Rcmdr. This is the msg I >receive: >> >> >> package ?Rcmdr? successfully unpacked and MD5 sums checked >> >> The downloaded binary packages are in >> >> C:\Users\toufiz00\AppData\Local\Temp\RtmpgXuxDP\downloaded_packages >> > local({pkg <- select.list(sort(.packages(all.available >> > TRUE)),graphics=TRUE) >> + if(nchar(pkg)) library(pkg, character.only=TRUE)}) >> Loading required package: RcmdrMisc >> Error: package or namespace load failed for ?RcmdrMisc? in >rbind(info, >> getNamespaceInfo(env, "S3methods")): >> number of columns of matrices must match (see arg 2) >> Error: package ?RcmdrMisc? could not be loaded >> > >> >> I am running R 3.5.3 on WIN 10 >> >> thanks for your help >> >> Best >> >> Toufik >> >> ______________________________________________ >> R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >> https://stat.ethz.ch/mailman/listinfo/r-help >> PLEASE do read the posting guide http://www.R-project.org/posting- >> guide.html >> and provide commented, minimal, self-contained, reproducible code. >______________________________________________ >R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >https://stat.ethz.ch/mailman/listinfo/r-help >PLEASE do read the posting guide >http://www.R-project.org/posting-guide.html >and provide commented, minimal, self-contained, reproducible code.-- Sent from my phone. Please excuse my brevity.
Dears Thanks a lot , I understand that may be Rcmdr is not ?adapted? to run with R 3.5.3 so I will try to update R version to 3.6.2 or use the oldest version of R I used in the past. I will let you know the outcome Best regards Toufik> Le 6 janv. 2020 ? 20:37, Jeff Newmiller <jdnewmil at dcn.davis.ca.us> a ?crit : > > That version of R happens to be "current" if using MRAN... which has some benefits (MKL comes pre-configured) and some... ah... "philosophical" ideas about stability (uses checkpoint package out of the box... which freezes packages at 2019-04-15 UTC unless actions are taken to use a different snapshot [1]). The OP may be "stuck in time" at Rcmdr 2.5-2 if they have not invoked checkpoint or adjusted the "repos" option... and if the latter then they may be encountering package incompatibilities with R 3.5.3 that should have been caught with a minimum R-version spec in the Rcmdr package. > > [1] https://mran.microsoft.com/documents/rro/reproducibility > >> On January 6, 2020 10:20:04 AM PST, "Fox, John" <jfox at mcmaster.ca> wrote: >> Dear Toufik, >> >> You've already had a suggestion to check whether RcmdrMisc is >> installed. It should have been installed automatically when you >> installed the Rcmdr package. >> >> If RcmdrMisc is installed, see whether you can load it directly via the >> command library(RcmdrMisc). If that too fails, you could try >> reinstalling RcmdrMisc via install.packages("RcmdrMisc"). >> >> Finally, you're using an old version of R. You might try installing the >> current version, which is 3.6.2. Then install the Rcmdr package by >> install.packages("Rcmdr"). >> >> I hope this helps, >> John >> >> ----------------------------------------------------------------- >> John Fox >> Professor Emeritus >> McMaster University >> Hamilton, Ontario, Canada >> Web: https://socialsciences.mcmaster.ca/jfox/ >> >> >> >>> -----Original Message----- >>> From: R-help <r-help-bounces at r-project.org> On Behalf Of tzahaf >>> Sent: Monday, January 6, 2020 8:16 AM >>> To: r-help at r-project.org >>> Subject: [R] issue with Rcmdr >>> >>> Dear >>> >>> I have a problem when trying to use Rcmdr. This is the msg I >> receive: >>> >>> >>> package ?Rcmdr? successfully unpacked and MD5 sums checked >>> >>> The downloaded binary packages are in >>> >>> C:\Users\toufiz00\AppData\Local\Temp\RtmpgXuxDP\downloaded_packages >>>> local({pkg <- select.list(sort(.packages(all.available >>>> TRUE)),graphics=TRUE) >>> + if(nchar(pkg)) library(pkg, character.only=TRUE)}) >>> Loading required package: RcmdrMisc >>> Error: package or namespace load failed for ?RcmdrMisc? in >> rbind(info, >>> getNamespaceInfo(env, "S3methods")): >>> number of columns of matrices must match (see arg 2) >>> Error: package ?RcmdrMisc? could not be loaded >>>> >>> >>> I am running R 3.5.3 on WIN 10 >>> >>> thanks for your help >>> >>> Best >>> >>> Toufik >>> >>> ______________________________________________ >>> R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >>> https://stat.ethz.ch/mailman/listinfo/r-help >>> PLEASE do read the posting guide http://www.R-project.org/posting- >>> guide.html >>> and provide commented, minimal, self-contained, reproducible code. >> ______________________________________________ >> R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >> https://stat.ethz.ch/mailman/listinfo/r-help >> PLEASE do read the posting guide >> http://www.R-project.org/posting-guide.html >> and provide commented, minimal, self-contained, reproducible code. > > -- > Sent from my phone. Please excuse my brevity.