Dear John and R users, Thank you very much for your help In my consol, i typed:> install.packages("RcmdrPlugin.FactoMineR")And got the following message "Installing package(s) into '/Users/sarahcontequoi/Library/R/2.15/library' (as 'lib' is unspecified) Warning in install.packages : package 'RcmdrPlugin.FactoMineR' is not available (for R version 2.15.1)" 2016-02-10 17:39 GMT+01:00 Fox, John <jfox at mcmaster.ca>:> Dear Sarah, > > I don't entirely follow what you did, but my guess is that you installed > the Rcmdr and FactoMineR packages but not the RcmdrPlugin.FactoMineR > package. If that's the case, then install the RcmdrPlugin.FactoMineR, e.g., > via install.packages("RcmdrPlugin.FactoMineR") and try again. > > You should be able to load the plug-in from the R Commander "Tools > Load > Rcmdr Plug-in(s)" menu (it works for me). Unfortunately, you can't load the > RcmdrPlugin.FactoMineR package directly by the command > library(RcmdrPlugin.FactoMineR) because the authors of the plug-in > apparently didn't make it self-starting. > > I hope this helps, > John > > ----------------------------- > John Fox, Professor > McMaster University > Hamilton, Ontario > Canada L8S 4M4 > Web: socserv.mcmaster.ca/jfox > > > > > -----Original Message----- > > From: R-help [mailto:r-help-bounces at r-project.org] On Behalf Of Sarah > > Bortolamiol > > Sent: February 10, 2016 6:01 AM > > To: r-help at r-project.org > > Subject: [R] MCA, Rcmdr, FactoMineR > > > > Dear R users, > > > > I am a beginner in R so my question may be a bit stupid. I tried to > search in > > forums and did not find the answer I am looking for. I should precise > that I > > am using Rstudio on Mac (OsX 10.10.5). > > > > I want to run a MCA analysis on my data (with Benzecri correction, with > active > > and supplementary variables). It seems that the FactoMineR package is > doing > > this. However, it seems it is not working as it should. In Rstudio > console I call > > "library(Rcmdr)", and it opens a new window with XQuartz. > > Then I want to upload FactoMineR package so I go in tool, I select > > FactoMineR and validate. Then I am supposed to charge plug-ins but the > > option is not available (see picture attached) Do you know where it comes > > from? > > > > Thank you very much for your help, > > Sarah > > ______________________________________________ > > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see > > https://stat.ethz.ch/mailman/listinfo/r-help > > PLEASE do read the posting guide http://www.R-project.org/posting- > > guide.html > > and provide commented, minimal, self-contained, reproducible code. >-- Sarah Bortolamiol Projet FOX-TROTTE Docteure en G?ographie UMR 7533 - LADYSS UMR 7206 - Mus?um national d'histoire naturelle Mail: bortolamiol.sarah at gmail.com Tel: +33 6 78 05 31 78 [[alternative HTML version deleted]]
Your R is quite old -- newest version is at least 3.2.3 . As a general rule, you should first upgrade to the current versions of both R and packages **before posting**, as the posting guide requests I believe. This is precisely to avoid problems like this. If this fails to resolve your problems, re-post. (Ignore this advice if John or others with greater expertise respond. Mine is a general prescription only). Cheers, Bert Bert Gunter "The trouble with having an open mind is that people keep coming along and sticking things into it." -- Opus (aka Berkeley Breathed in his "Bloom County" comic strip ) On Wed, Feb 10, 2016 at 8:52 AM, Sarah Bortolamiol <bortolamiol.sarah at gmail.com> wrote:> Dear John and R users, > > Thank you very much for your help > In my consol, i typed: >> install.packages("RcmdrPlugin.FactoMineR") > And got the following message > "Installing package(s) into '/Users/sarahcontequoi/Library/R/2.15/library' > (as 'lib' is unspecified) > Warning in install.packages : > package 'RcmdrPlugin.FactoMineR' is not available (for R version 2.15.1)" > > > > 2016-02-10 17:39 GMT+01:00 Fox, John <jfox at mcmaster.ca>: > >> Dear Sarah, >> >> I don't entirely follow what you did, but my guess is that you installed >> the Rcmdr and FactoMineR packages but not the RcmdrPlugin.FactoMineR >> package. If that's the case, then install the RcmdrPlugin.FactoMineR, e.g., >> via install.packages("RcmdrPlugin.FactoMineR") and try again. >> >> You should be able to load the plug-in from the R Commander "Tools > Load >> Rcmdr Plug-in(s)" menu (it works for me). Unfortunately, you can't load the >> RcmdrPlugin.FactoMineR package directly by the command >> library(RcmdrPlugin.FactoMineR) because the authors of the plug-in >> apparently didn't make it self-starting. >> >> I hope this helps, >> John >> >> ----------------------------- >> John Fox, Professor >> McMaster University >> Hamilton, Ontario >> Canada L8S 4M4 >> Web: socserv.mcmaster.ca/jfox >> >> >> >> > -----Original Message----- >> > From: R-help [mailto:r-help-bounces at r-project.org] On Behalf Of Sarah >> > Bortolamiol >> > Sent: February 10, 2016 6:01 AM >> > To: r-help at r-project.org >> > Subject: [R] MCA, Rcmdr, FactoMineR >> > >> > Dear R users, >> > >> > I am a beginner in R so my question may be a bit stupid. I tried to >> search in >> > forums and did not find the answer I am looking for. I should precise >> that I >> > am using Rstudio on Mac (OsX 10.10.5). >> > >> > I want to run a MCA analysis on my data (with Benzecri correction, with >> active >> > and supplementary variables). It seems that the FactoMineR package is >> doing >> > this. However, it seems it is not working as it should. In Rstudio >> console I call >> > "library(Rcmdr)", and it opens a new window with XQuartz. >> > Then I want to upload FactoMineR package so I go in tool, I select >> > FactoMineR and validate. Then I am supposed to charge plug-ins but the >> > option is not available (see picture attached) Do you know where it comes >> > from? >> > >> > Thank you very much for your help, >> > Sarah >> > ______________________________________________ >> > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >> > https://stat.ethz.ch/mailman/listinfo/r-help >> > PLEASE do read the posting guide http://www.R-project.org/posting- >> > guide.html >> > and provide commented, minimal, self-contained, reproducible code. >> > > > > -- > Sarah Bortolamiol > Projet FOX-TROTTE > > Docteure en G?ographie > UMR 7533 - LADYSS > UMR 7206 - Mus?um national d'histoire naturelle > Mail: bortolamiol.sarah at gmail.com > Tel: +33 6 78 05 31 78 > > [[alternative HTML version deleted]] > > ______________________________________________ > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code.
The Posting Guide mentioned at the bottom of every message on the list has many helpful tips. One of these is that you should install the latest version of R before asking for help on the list. v2.15.1 is quite old in Internet time. BTW, if this your troubles are specific to running on MacOSX, the PG also recommends asking your question on the R-sig-mac list. That is, if you are having trouble installing the latest version of R because of your OS, you probably should be asking people more likely to be familiar with R on your OS. (You might get lucky here anyway, but targeting your question is preferred.) -- Sent from my phone. Please excuse my brevity. On February 10, 2016 8:52:44 AM PST, Sarah Bortolamiol <bortolamiol.sarah at gmail.com> wrote:>Dear John and R users, > >Thank you very much for your help >In my consol, i typed: >> install.packages("RcmdrPlugin.FactoMineR") >And got the following message >"Installing package(s) into >'/Users/sarahcontequoi/Library/R/2.15/library' >(as 'lib' is unspecified) >Warning in install.packages : >package 'RcmdrPlugin.FactoMineR' is not available (for R version >2.15.1)" > > > >2016-02-10 17:39 GMT+01:00 Fox, John <jfox at mcmaster.ca>: > >> Dear Sarah, >> >> I don't entirely follow what you did, but my guess is that you >installed >> the Rcmdr and FactoMineR packages but not the RcmdrPlugin.FactoMineR >> package. If that's the case, then install the RcmdrPlugin.FactoMineR, >e.g., >> via install.packages("RcmdrPlugin.FactoMineR") and try again. >> >> You should be able to load the plug-in from the R Commander "Tools > >Load >> Rcmdr Plug-in(s)" menu (it works for me). Unfortunately, you can't >load the >> RcmdrPlugin.FactoMineR package directly by the command >> library(RcmdrPlugin.FactoMineR) because the authors of the plug-in >> apparently didn't make it self-starting. >> >> I hope this helps, >> John >> >> ----------------------------- >> John Fox, Professor >> McMaster University >> Hamilton, Ontario >> Canada L8S 4M4 >> Web: socserv.mcmaster.ca/jfox >> >> >> >> > -----Original Message----- >> > From: R-help [mailto:r-help-bounces at r-project.org] On Behalf Of >Sarah >> > Bortolamiol >> > Sent: February 10, 2016 6:01 AM >> > To: r-help at r-project.org >> > Subject: [R] MCA, Rcmdr, FactoMineR >> > >> > Dear R users, >> > >> > I am a beginner in R so my question may be a bit stupid. I tried to >> search in >> > forums and did not find the answer I am looking for. I should >precise >> that I >> > am using Rstudio on Mac (OsX 10.10.5). >> > >> > I want to run a MCA analysis on my data (with Benzecri correction, >with >> active >> > and supplementary variables). It seems that the FactoMineR package >is >> doing >> > this. However, it seems it is not working as it should. In Rstudio >> console I call >> > "library(Rcmdr)", and it opens a new window with XQuartz. >> > Then I want to upload FactoMineR package so I go in tool, I select >> > FactoMineR and validate. Then I am supposed to charge plug-ins but >the >> > option is not available (see picture attached) Do you know where it >comes >> > from? >> > >> > Thank you very much for your help, >> > Sarah >> > ______________________________________________ >> > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >> > https://stat.ethz.ch/mailman/listinfo/r-help >> > PLEASE do read the posting guide http://www.R-project.org/posting- >> > guide.html >> > and provide commented, minimal, self-contained, reproducible code. >> > > > >-- >Sarah Bortolamiol >Projet FOX-TROTTE > >Docteure en G?ographie >UMR 7533 - LADYSS >UMR 7206 - Mus?um national d'histoire naturelle >Mail: bortolamiol.sarah at gmail.com >Tel: +33 6 78 05 31 78 > > [[alternative HTML version deleted]] > >______________________________________________ >R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see >https://stat.ethz.ch/mailman/listinfo/r-help >PLEASE do read the posting guide >http://www.R-project.org/posting-guide.html >and provide commented, minimal, self-contained, reproducible code.[[alternative HTML version deleted]]
Dear all, I am very sorry for this mistake (I will definetly remember the lesson!), its now working with R latest version... Thank you very much for your help and advices Sarah 2016-02-10 18:27 GMT+01:00 Bert Gunter <bgunter.4567 at gmail.com>:> Your R is quite old -- newest version is at least 3.2.3 . As a general > rule, you should first upgrade to the current versions of both R and > packages **before posting**, as the posting guide requests I believe. > This is precisely to avoid problems like this. > > If this fails to resolve your problems, re-post. > > (Ignore this advice if John or others with greater expertise respond. > Mine is a general prescription only). > > Cheers, > Bert > > > Bert Gunter > > "The trouble with having an open mind is that people keep coming along > and sticking things into it." > -- Opus (aka Berkeley Breathed in his "Bloom County" comic strip ) > > > On Wed, Feb 10, 2016 at 8:52 AM, Sarah Bortolamiol > <bortolamiol.sarah at gmail.com> wrote: > > Dear John and R users, > > > > Thank you very much for your help > > In my consol, i typed: > >> install.packages("RcmdrPlugin.FactoMineR") > > And got the following message > > "Installing package(s) into > '/Users/sarahcontequoi/Library/R/2.15/library' > > (as 'lib' is unspecified) > > Warning in install.packages : > > package 'RcmdrPlugin.FactoMineR' is not available (for R version > 2.15.1)" > > > > > > > > 2016-02-10 17:39 GMT+01:00 Fox, John <jfox at mcmaster.ca>: > > > >> Dear Sarah, > >> > >> I don't entirely follow what you did, but my guess is that you installed > >> the Rcmdr and FactoMineR packages but not the RcmdrPlugin.FactoMineR > >> package. If that's the case, then install the RcmdrPlugin.FactoMineR, > e.g., > >> via install.packages("RcmdrPlugin.FactoMineR") and try again. > >> > >> You should be able to load the plug-in from the R Commander "Tools > > Load > >> Rcmdr Plug-in(s)" menu (it works for me). Unfortunately, you can't load > the > >> RcmdrPlugin.FactoMineR package directly by the command > >> library(RcmdrPlugin.FactoMineR) because the authors of the plug-in > >> apparently didn't make it self-starting. > >> > >> I hope this helps, > >> John > >> > >> ----------------------------- > >> John Fox, Professor > >> McMaster University > >> Hamilton, Ontario > >> Canada L8S 4M4 > >> Web: socserv.mcmaster.ca/jfox > >> > >> > >> > >> > -----Original Message----- > >> > From: R-help [mailto:r-help-bounces at r-project.org] On Behalf Of Sarah > >> > Bortolamiol > >> > Sent: February 10, 2016 6:01 AM > >> > To: r-help at r-project.org > >> > Subject: [R] MCA, Rcmdr, FactoMineR > >> > > >> > Dear R users, > >> > > >> > I am a beginner in R so my question may be a bit stupid. I tried to > >> search in > >> > forums and did not find the answer I am looking for. I should precise > >> that I > >> > am using Rstudio on Mac (OsX 10.10.5). > >> > > >> > I want to run a MCA analysis on my data (with Benzecri correction, > with > >> active > >> > and supplementary variables). It seems that the FactoMineR package is > >> doing > >> > this. However, it seems it is not working as it should. In Rstudio > >> console I call > >> > "library(Rcmdr)", and it opens a new window with XQuartz. > >> > Then I want to upload FactoMineR package so I go in tool, I select > >> > FactoMineR and validate. Then I am supposed to charge plug-ins but the > >> > option is not available (see picture attached) Do you know where it > comes > >> > from? > >> > > >> > Thank you very much for your help, > >> > Sarah > >> > ______________________________________________ > >> > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see > >> > https://stat.ethz.ch/mailman/listinfo/r-help > >> > PLEASE do read the posting guide http://www.R-project.org/posting- > >> > guide.html > >> > and provide commented, minimal, self-contained, reproducible code. > >> > > > > > > > > -- > > Sarah Bortolamiol > > Projet FOX-TROTTE > > > > Docteure en G?ographie > > UMR 7533 - LADYSS > > UMR 7206 - Mus?um national d'histoire naturelle > > Mail: bortolamiol.sarah at gmail.com > > Tel: +33 6 78 05 31 78 > > > > [[alternative HTML version deleted]] > > > > ______________________________________________ > > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see > > https://stat.ethz.ch/mailman/listinfo/r-help > > PLEASE do read the posting guide > http://www.R-project.org/posting-guide.html > > and provide commented, minimal, self-contained, reproducible code. >-- Sarah Bortolamiol Projet FOX-TROTTE Docteure en G?ographie UMR 7533 - LADYSS UMR 7206 - Mus?um national d'histoire naturelle Mail: bortolamiol.sarah at gmail.com Tel: +33 6 78 05 31 78 [[alternative HTML version deleted]]