R help - Sep 2015 - Unable to run RcmdrPlugin.survival using 3.2.2 with Windows 10

Dear John,

Very many thanks.  Your hypothesis was completely correct - I did save the 
workspace, and this is what created the problem.   As a newbie, being part 
way through an "exercise", saving my workspace intuitively seemed the
right
thing to do.   Clearly not!    So now, before I closed R and Rcmdr, I copied 
and pasted from Rcmdr's script file into a MS Word document, added a few 
comments (with preceding #), and then closed without otherwise saving R's 
script, output, workspace or markdown.  I hope this is reasonable practice. 
If not, I would be grateful for guidance on this.

Once again, very many thanks.  Joyaa

-----Original Message----- 
From: Fox, John
Sent: Friday, September 4, 2015 1:24 PM
To: Joyaa Antares
Cc: r-help at r-project.org
Subject: RE: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with Windows 
10

Dear Joyaa,
> -----Original Message-----
> From: Joyaa Antares [mailto:joyaa at goldcoastosteopathy.com.au]
> Sent: September 3, 2015 9:37 PM
> To: Fox, John <jfox at mcmaster.ca>
> Cc: r-help at r-project.org
> Subject: Re: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with 
> Windows 10
>
> Dear John, Dear List,
>
> Thank you for responding.  Like you, I have tried uninstalling R and 
> reinstalling
> again.  Question 1: having uninstalled R, how do you delete the package 
> library?
You say below that you installed R packages when R was run as administrator 
and that you took all defaults. In that case,  the installed packages will 
be in C:\Program Files\R\R-3.2.2\library . Just delete the library 
directory, which will still be there after R 3.2.2 is uninstalled. I do 
recommend, by the way, that, for using the Rcmdr, you install R with the SDI 
rather than the default MDI, but that doesn't explain your difficulties.
>
> I have used defaults throughout the process, except for running the whole 
> things
> as Administrator rather than a User.  For the mirror, my first two install 
> attempts
> were via a mirror in Germany.  My 3rd and 4th attempts via Cambridge, UK.
>
> Perhaps importantly: the first time I ran the RcmdrPlugin.survival plug-in 
> it
> worked fine.
If you said that before, I missed it.
> I got half way through the exercise I was attempting, then closed
> the programs for the night.  The next day, when I tried to reload the 
> plugin from
> R Commander, the plugin asked me to restart R Commander, but on opting for
> "Yes", this is when R Commander does not open properly.
Here's my hypothesis: When you "closed" R, you saved the R
workspace. My
guess is that this is the source of your problem. If so, the saved workspace 
is in the file .RData in your home directory; delete it and try again.

If this works, in future, exit from the Rcmdr and R via the Rcmdr menus (or 
if closing R directly, don't save the workspace).

I hope this helps,
John

-----------------------------
John Fox, Professor
McMaster University
Hamilton, Ontario
Canada L8S 4M4
Web: socserv.mcmaster.ca/jfox

>
> My thanks to you and the list for your time.  Joyaa (Gold Coast, 
> Queensland,
> Australia)
>
> -----Original Message-----
> From: Fox, John
> Sent: Friday, September 4, 2015 1:29 AM
> To: Joyaa Antares
> Cc: r-help at r-project.org
> Subject: RE: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with 
> Windows
> 10
>
> Dear Joyaa,
>
> I too run R 3.2.2 on a Windows 10 system. I uninstalled R, deleted my 
> package
> library, and then reinstalled R and the Rcmdr and RcmdrPlugin.survival 
> packages.
> I took all defaults, except that I selected the SDI rather than the 
> default MDI for
> Rgui, but I seriously doubt that this is the source of your problem. I 
> used the 0-
> Cloud mirror, both for R
> 3.2.2 and for packages.
>
> I'm afraid that I can't duplicate your problem -- everything works 
> perfectly fine
> for me.
>
> You provided a reasonable amount of detail, but is there anything else you 
> can
> add?
>
> Best,
> John
>
> -----------------------------
> John Fox, Professor
> McMaster University
> Hamilton, Ontario
> Canada L8S 4M4
> web: socserv.mcmaster.ca/jfox
>
>
> ________________________________________
> From: R-help [r-help-bounces at r-project.org] on behalf of Joyaa Antares
> [joyaa at goldcoastosteopathy.com.au]
> Sent: September 3, 2015 8:31 AM
> To: r-help at r-project.org
> Subject: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with Windows 
> 10
>
> Hello r-help,
>
> I am quite new to R.  I downloaded R 3.2.2 for Windows to use with Windows
> 10.
>
> On attempting to load the RcmdrPlugin.survival plug-in I got this error
> message:
>
> Error in structure(.External(.C_dotTclObjv, objv), class =
"tclObj") :
>   [tcl] invalid command name "configure".
>
> The lead-up to this was:
>
> * I uninstalled R 3.2.2 and deleted all R files I could find.
> * Downloaded R 3.2.2 to do a fresh install
> * Opened the .exe file as Administrator
> * Ran 64-bit R as Administrator
> * Updated all packages
> * Installed Rcmdr and RcmdrPlugin.survival
> * Ran Rcmdr using library(Rcmdr) from the console
> * This required an install of a host of packages, which I installed
> * Loaded RcmdrPlugin.survival from the Tools menu
> * I was asked to restart R commander, and when I tried it didn't open 
> properly
> (showing only File/Edit/Data in the menu bar), and this wouldn't close 
> properly
> either.  The error message as above showed in the console.
>
> I haven't posted to the list before and would be very grateful for
help.
> Thank you.   Joyaa
>         [[alternative HTML version deleted]]
>
> ______________________________________________
> R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide 
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
> =

On Fri, 4 Sep 2015 21:07:19 +1000
"Joyaa Antares" <joyaa at goldcoastosteopathy.com.au> wrote:
> Dear John,
> 
> Very many thanks.  Your hypothesis was completely correct - I did
> save the workspace, and this is what created the problem.   As a
> newbie, being part way through an "exercise", saving my workspace
> intuitively seemed the right thing to do.   Clearly not!    So now,
> before I closed R and Rcmdr, I copied and pasted from Rcmdr's script
> file into a MS Word document, added a few comments (with preceding
> #), and then closed without otherwise saving R's script, output,
> workspace or markdown.  I hope this is reasonable practice. If not, I
> would be grateful for guidance on this.
> 
> Once again, very many thanks.  Joyaa
> 
A potentially useful piece of advise is to avoid using MSWord as a text
editor.  I don't use Rcmdr, but text files, particularly CSVs are
extremely useful in R as data files.  Scripts should be pure text as
well.  Word demands that you keep this in mind at all times.  It won't
default to a simple text mode.  You can use notepad, which MS provides
as a stopgap, though I would recommend a more capable programmer's text
editor such as Notepad++, a very useful GPL-licensed text editor for
Windows, which can be downloaded for free.    

JWDougherty

This is a major point... do not make the mistake that you can "get by"
using MSWord as a text editor because it actively changes your code in ways that
make sense in a word processor but change code in ways that corrupt it.
---------------------------------------------------------------------------
Jeff Newmiller                        The     .....       .....  Go Live...
DCN:<jdnewmil at dcn.davis.ca.us>        Basics: ##.#.       ##.#.  Live
Go...
                                      Live:   OO#.. Dead: OO#..  Playing
Research Engineer (Solar/Batteries            O.O#.       #.O#.  with
/Software/Embedded Controllers)               .OO#.       .OO#.  rocks...1k
--------------------------------------------------------------------------- 
Sent from my phone. Please excuse my brevity.

On September 4, 2015 7:09:29 AM PDT, jwd <jwd at surewest.net>
wrote:
>On Fri, 4 Sep 2015 21:07:19 +1000
>"Joyaa Antares" <joyaa at goldcoastosteopathy.com.au> wrote:
>
>> Dear John,
>> 
>> Very many thanks.  Your hypothesis was completely correct - I did
>> save the workspace, and this is what created the problem.   As a
>> newbie, being part way through an "exercise", saving my
workspace
>> intuitively seemed the right thing to do.   Clearly not!    So now,
>> before I closed R and Rcmdr, I copied and pasted from Rcmdr's
script
>> file into a MS Word document, added a few comments (with preceding
>> #), and then closed without otherwise saving R's script, output,
>> workspace or markdown.  I hope this is reasonable practice. If not, I
>> would be grateful for guidance on this.
>> 
>> Once again, very many thanks.  Joyaa
>> 
>A potentially useful piece of advise is to avoid using MSWord as a text
>editor.  I don't use Rcmdr, but text files, particularly CSVs are
>extremely useful in R as data files.  Scripts should be pure text as
>well.  Word demands that you keep this in mind at all times.  It won't
>default to a simple text mode.  You can use notepad, which MS provides
>as a stopgap, though I would recommend a more capable programmer's text
>editor such as Notepad++, a very useful GPL-licensed text editor for
>Windows, which can be downloaded for free.    
>
>JWDougherty
>
>______________________________________________
>R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
>https://stat.ethz.ch/mailman/listinfo/r-help
>PLEASE do read the posting guide
>http://www.R-project.org/posting-guide.html
>and provide commented, minimal, self-contained, reproducible code.

Dear Joyaa,
> -----Original Message-----
> From: Joyaa Antares [mailto:joyaa at goldcoastosteopathy.com.au]
> Sent: Friday, September 4, 2015 7:07 AM
> To: Fox, John
> Cc: r-help at r-project.org
> Subject: Re: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with
> Windows 10
> 
> Dear John,
> 
> Very many thanks.  Your hypothesis was completely correct - I did save
> the
> workspace, and this is what created the problem.   As a newbie, being
> part
> way through an "exercise", saving my workspace intuitively seemed
the
> right
> thing to do.   Clearly not!    
It wouldn't have seemed the correct thing to do had you read the Rcmdr
manual (accessible via "Help > Introduction to the R Commander").
See Section 6.5.

I understand why saving the workspace was made the default on exiting the R
Console -- after all, it can help users to avoid inadvertently losing work --
but it my experience it is a frequent source of confusion among new users of R,
whether or not they're using the R Commander.
> So now, before I closed R and Rcmdr, I
> copied
> and pasted from Rcmdr's script file into a MS Word document, added a
few
> comments (with preceding #), and then closed without otherwise saving
> R's
> script, output, workspace or markdown.  I hope this is reasonable
> practice.
> If not, I would be grateful for guidance on this.
You've already received good advice from others about *not* using Word as a
programming editor. I think that it's safe to say that the most popular
programming editor for R (and for good reason) is RStudio. The Rcmdr script tab
has basic editing capabilities, including saving and opening R scripts, and it
offers to save the script when you exit.

You can, however, paste input and output, including graphs, from the Rcmdr into
Word to create a report. It would be better, however, to use the Rcmdr Markdown
tab to create reports in the form of HTML, PDF, or Word files. The Rcmdr
includes an editor for R Markdown documents.  See Sections 6.1 and 6.2 of the
manual.

Best,
 John
> 
> Once again, very many thanks.  Joyaa
> 
> -----Original Message-----
> From: Fox, John
> Sent: Friday, September 4, 2015 1:24 PM
> To: Joyaa Antares
> Cc: r-help at r-project.org
> Subject: RE: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with
> Windows
> 10
> 
> Dear Joyaa,
> 
> > -----Original Message-----
> > From: Joyaa Antares [mailto:joyaa at goldcoastosteopathy.com.au]
> > Sent: September 3, 2015 9:37 PM
> > To: Fox, John <jfox at mcmaster.ca>
> > Cc: r-help at r-project.org
> > Subject: Re: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with
> > Windows 10
> >
> > Dear John, Dear List,
> >
> > Thank you for responding.  Like you, I have tried uninstalling R and
> > reinstalling
> > again.  Question 1: having uninstalled R, how do you delete the
> package
> > library?
> 
> You say below that you installed R packages when R was run as
> administrator
> and that you took all defaults. In that case,  the installed packages
> will
> be in C:\Program Files\R\R-3.2.2\library . Just delete the library
> directory, which will still be there after R 3.2.2 is uninstalled. I do
> recommend, by the way, that, for using the Rcmdr, you install R with the
> SDI
> rather than the default MDI, but that doesn't explain your
difficulties.
> 
> >
> > I have used defaults throughout the process, except for running the
> whole
> > things
> > as Administrator rather than a User.  For the mirror, my first two
> install
> > attempts
> > were via a mirror in Germany.  My 3rd and 4th attempts via Cambridge,
> UK.
> >
> > Perhaps importantly: the first time I ran the RcmdrPlugin.survival
> plug-in
> > it
> > worked fine.
> 
> If you said that before, I missed it.
> 
> > I got half way through the exercise I was attempting, then closed
> > the programs for the night.  The next day, when I tried to reload the
> > plugin from
> > R Commander, the plugin asked me to restart R Commander, but on opting
> for
> > "Yes", this is when R Commander does not open properly.
> 
> Here's my hypothesis: When you "closed" R, you saved the R
workspace. My
> guess is that this is the source of your problem. If so, the saved
> workspace
> is in the file .RData in your home directory; delete it and try again.
> 
> If this works, in future, exit from the Rcmdr and R via the Rcmdr menus
> (or
> if closing R directly, don't save the workspace).
> 
> I hope this helps,
> John
> 
> -----------------------------
> John Fox, Professor
> McMaster University
> Hamilton, Ontario
> Canada L8S 4M4
> Web: socserv.mcmaster.ca/jfox
> 
> 
> >
> > My thanks to you and the list for your time.  Joyaa (Gold Coast,
> > Queensland,
> > Australia)
> >
> > -----Original Message-----
> > From: Fox, John
> > Sent: Friday, September 4, 2015 1:29 AM
> > To: Joyaa Antares
> > Cc: r-help at r-project.org
> > Subject: RE: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with
> > Windows
> > 10
> >
> > Dear Joyaa,
> >
> > I too run R 3.2.2 on a Windows 10 system. I uninstalled R, deleted my
> > package
> > library, and then reinstalled R and the Rcmdr and RcmdrPlugin.survival
> > packages.
> > I took all defaults, except that I selected the SDI rather than the
> > default MDI for
> > Rgui, but I seriously doubt that this is the source of your problem. I
> > used the 0-
> > Cloud mirror, both for R
> > 3.2.2 and for packages.
> >
> > I'm afraid that I can't duplicate your problem -- everything
works
> > perfectly fine
> > for me.
> >
> > You provided a reasonable amount of detail, but is there anything else
> you
> > can
> > add?
> >
> > Best,
> > John
> >
> > -----------------------------
> > John Fox, Professor
> > McMaster University
> > Hamilton, Ontario
> > Canada L8S 4M4
> > web: socserv.mcmaster.ca/jfox
> >
> >
> > ________________________________________
> > From: R-help [r-help-bounces at r-project.org] on behalf of Joyaa
Antares
> > [joyaa at goldcoastosteopathy.com.au]
> > Sent: September 3, 2015 8:31 AM
> > To: r-help at r-project.org
> > Subject: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with
> Windows
> > 10
> >
> > Hello r-help,
> >
> > I am quite new to R.  I downloaded R 3.2.2 for Windows to use with
> Windows
> > 10.
> >
> > On attempting to load the RcmdrPlugin.survival plug-in I got this
> error
> > message:
> >
> > Error in structure(.External(.C_dotTclObjv, objv), class =
"tclObj") :
> >   [tcl] invalid command name "configure".
> >
> > The lead-up to this was:
> >
> > * I uninstalled R 3.2.2 and deleted all R files I could find.
> > * Downloaded R 3.2.2 to do a fresh install
> > * Opened the .exe file as Administrator
> > * Ran 64-bit R as Administrator
> > * Updated all packages
> > * Installed Rcmdr and RcmdrPlugin.survival
> > * Ran Rcmdr using library(Rcmdr) from the console
> > * This required an install of a host of packages, which I installed
> > * Loaded RcmdrPlugin.survival from the Tools menu
> > * I was asked to restart R commander, and when I tried it didn't
open
> > properly
> > (showing only File/Edit/Data in the menu bar), and this wouldn't
close
> > properly
> > either.  The error message as above showed in the console.
> >
> > I haven't posted to the list before and would be very grateful for
> help.
> > Thank you.   Joyaa
> >         [[alternative HTML version deleted]]
> >
> > ______________________________________________
> > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
> > https://stat.ethz.ch/mailman/listinfo/r-help
> > PLEASE do read the posting guide
> > http://www.R-project.org/posting-guide.html
> > and provide commented, minimal, self-contained, reproducible code.
> > =

Der JWD, Dear Jeff Newmiller,

Many thanks for your useful advice.     JWD - I have notepad++ and I don't 
know why I didn't think of that!     Having said that, I will take a look at
RStudio that John mentions too.

Thanks again.  Much appreciated.  Joyaa

-----Original Message----- 
From: jwd
Sent: Saturday, September 5, 2015 12:09 AM
To: r-help at r-project.org
Cc: Joyaa Antares
Subject: Re: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with Windows 
10

On Fri, 4 Sep 2015 21:07:19 +1000
"Joyaa Antares" <joyaa at goldcoastosteopathy.com.au> wrote:
> Dear John,
>
> Very many thanks.  Your hypothesis was completely correct - I did
> save the workspace, and this is what created the problem.   As a
> newbie, being part way through an "exercise", saving my workspace
> intuitively seemed the right thing to do.   Clearly not!    So now,
> before I closed R and Rcmdr, I copied and pasted from Rcmdr's script
> file into a MS Word document, added a few comments (with preceding
> #), and then closed without otherwise saving R's script, output,
> workspace or markdown.  I hope this is reasonable practice. If not, I
> would be grateful for guidance on this.
>
> Once again, very many thanks.  Joyaa
>
A potentially useful piece of advise is to avoid using MSWord as a text
editor.  I don't use Rcmdr, but text files, particularly CSVs are
extremely useful in R as data files.  Scripts should be pure text as
well.  Word demands that you keep this in mind at all times.  It won't
default to a simple text mode.  You can use notepad, which MS provides
as a stopgap, though I would recommend a more capable programmer's text
editor such as Notepad++, a very useful GPL-licensed text editor for
Windows, which can be downloaded for free.

JWDougherty

Dear John,

You mention, "the Rcmdr manual (accessible via "Help > Introduction
to the R
Commander")".

Apologies for my dumbness, but the manual I did read - and found helpful - 
before posting is clearly a different one.   A 43 page pdf  with no section 
numbers nor any reference to the Workspace.   (Package ?Rcmdr?    August 19, 
2015     Version 2.2-0    Date 2015-08-14    Title R Commander ....//  snip 
//...   Author John Fox [aut, cre], Milan Bouchet-Valat [aut],  ..... // 
snip //").

Since the Help page you refer to doesn't seem to be here 
https://stat.ethz.ch/mailman/listinfo/r-help  or here 
http://finzi.psych.upenn.edu/,  I would be very grateful for an extra 
direction and apologise for getting a bit lost amongst all the 
possibilities.

Kind regards, Joyaa  (feeling like a fish in a new ocean).


-----Original Message----- 
From: Fox, John
Sent: Saturday, September 5, 2015 2:07 AM
To: Joyaa Antares
Cc: r-help at r-project.org
Subject: RE: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with Windows 
10

Dear Joyaa,
> -----Original Message-----
> From: Joyaa Antares [mailto:joyaa at goldcoastosteopathy.com.au]
> Sent: Friday, September 4, 2015 7:07 AM
> To: Fox, John
> Cc: r-help at r-project.org
> Subject: Re: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with
> Windows 10
>
> Dear John,
>
> Very many thanks.  Your hypothesis was completely correct - I did save
> the
> workspace, and this is what created the problem.   As a newbie, being
> part
> way through an "exercise", saving my workspace intuitively seemed
the
> right
> thing to do.   Clearly not!
It wouldn't have seemed the correct thing to do had you read the Rcmdr 
manual (accessible via "Help > Introduction to the R Commander").
See
Section 6.5.

I understand why saving the workspace was made the default on exiting the R 
Console -- after all, it can help users to avoid inadvertently losing 
work -- but it my experience it is a frequent source of confusion among new 
users of R, whether or not they're using the R Commander.
> So now, before I closed R and Rcmdr, I
> copied
> and pasted from Rcmdr's script file into a MS Word document, added a
few
> comments (with preceding #), and then closed without otherwise saving
> R's
> script, output, workspace or markdown.  I hope this is reasonable
> practice.
> If not, I would be grateful for guidance on this.
You've already received good advice from others about *not* using Word as a 
programming editor. I think that it's safe to say that the most popular 
programming editor for R (and for good reason) is RStudio. The Rcmdr script 
tab has basic editing capabilities, including saving and opening R scripts, 
and it offers to save the script when you exit.

You can, however, paste input and output, including graphs, from the Rcmdr 
into Word to create a report. It would be better, however, to use the Rcmdr 
Markdown tab to create reports in the form of HTML, PDF, or Word files. The 
Rcmdr includes an editor for R Markdown documents.  See Sections 6.1 and 6.2 
of the manual.

Best,
John
>
> Once again, very many thanks.  Joyaa
>
> -----Original Message-----
> From: Fox, John
> Sent: Friday, September 4, 2015 1:24 PM
> To: Joyaa Antares
> Cc: r-help at r-project.org
> Subject: RE: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with
> Windows
> 10
>
> Dear Joyaa,
>
> > -----Original Message-----
> > From: Joyaa Antares [mailto:joyaa at goldcoastosteopathy.com.au]
> > Sent: September 3, 2015 9:37 PM
> > To: Fox, John <jfox at mcmaster.ca>
> > Cc: r-help at r-project.org
> > Subject: Re: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with
> > Windows 10
> >
> > Dear John, Dear List,
> >
> > Thank you for responding.  Like you, I have tried uninstalling R and
> > reinstalling
> > again.  Question 1: having uninstalled R, how do you delete the
> package
> > library?
>
> You say below that you installed R packages when R was run as
> administrator
> and that you took all defaults. In that case,  the installed packages
> will
> be in C:\Program Files\R\R-3.2.2\library . Just delete the library
> directory, which will still be there after R 3.2.2 is uninstalled. I do
> recommend, by the way, that, for using the Rcmdr, you install R with the
> SDI
> rather than the default MDI, but that doesn't explain your
difficulties.
>
> >
> > I have used defaults throughout the process, except for running the
> whole
> > things
> > as Administrator rather than a User.  For the mirror, my first two
> install
> > attempts
> > were via a mirror in Germany.  My 3rd and 4th attempts via Cambridge,
> UK.
> >
> > Perhaps importantly: the first time I ran the RcmdrPlugin.survival
> plug-in
> > it
> > worked fine.
>
> If you said that before, I missed it.
>
> > I got half way through the exercise I was attempting, then closed
> > the programs for the night.  The next day, when I tried to reload the
> > plugin from
> > R Commander, the plugin asked me to restart R Commander, but on opting
> for
> > "Yes", this is when R Commander does not open properly.
>
> Here's my hypothesis: When you "closed" R, you saved the R
workspace. My
> guess is that this is the source of your problem. If so, the saved
> workspace
> is in the file .RData in your home directory; delete it and try again.
>
> If this works, in future, exit from the Rcmdr and R via the Rcmdr menus
> (or
> if closing R directly, don't save the workspace).
>
> I hope this helps,
> John
>
> -----------------------------
> John Fox, Professor
> McMaster University
> Hamilton, Ontario
> Canada L8S 4M4
> Web: socserv.mcmaster.ca/jfox
>
>
> >
> > My thanks to you and the list for your time.  Joyaa (Gold Coast,
> > Queensland,
> > Australia)
> >
> > -----Original Message-----
> > From: Fox, John
> > Sent: Friday, September 4, 2015 1:29 AM
> > To: Joyaa Antares
> > Cc: r-help at r-project.org
> > Subject: RE: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with
> > Windows
> > 10
> >
> > Dear Joyaa,
> >
> > I too run R 3.2.2 on a Windows 10 system. I uninstalled R, deleted my
> > package
> > library, and then reinstalled R and the Rcmdr and RcmdrPlugin.survival
> > packages.
> > I took all defaults, except that I selected the SDI rather than the
> > default MDI for
> > Rgui, but I seriously doubt that this is the source of your problem. I
> > used the 0-
> > Cloud mirror, both for R
> > 3.2.2 and for packages.
> >
> > I'm afraid that I can't duplicate your problem -- everything
works
> > perfectly fine
> > for me.
> >
> > You provided a reasonable amount of detail, but is there anything else
> you
> > can
> > add?
> >
> > Best,
> > John
> >
> > -----------------------------
> > John Fox, Professor
> > McMaster University
> > Hamilton, Ontario
> > Canada L8S 4M4
> > web: socserv.mcmaster.ca/jfox
> >
> >
> > ________________________________________
> > From: R-help [r-help-bounces at r-project.org] on behalf of Joyaa
Antares
> > [joyaa at goldcoastosteopathy.com.au]
> > Sent: September 3, 2015 8:31 AM
> > To: r-help at r-project.org
> > Subject: [R] Unable to run RcmdrPlugin.survival using 3.2.2 with
> Windows
> > 10
> >
> > Hello r-help,
> >
> > I am quite new to R.  I downloaded R 3.2.2 for Windows to use with
> Windows
> > 10.
> >
> > On attempting to load the RcmdrPlugin.survival plug-in I got this
> error
> > message:
> >
> > Error in structure(.External(.C_dotTclObjv, objv), class =
"tclObj") :
> >   [tcl] invalid command name "configure".
> >
> > The lead-up to this was:
> >
> > * I uninstalled R 3.2.2 and deleted all R files I could find.
> > * Downloaded R 3.2.2 to do a fresh install
> > * Opened the .exe file as Administrator
> > * Ran 64-bit R as Administrator
> > * Updated all packages
> > * Installed Rcmdr and RcmdrPlugin.survival
> > * Ran Rcmdr using library(Rcmdr) from the console
> > * This required an install of a host of packages, which I installed
> > * Loaded RcmdrPlugin.survival from the Tools menu
> > * I was asked to restart R commander, and when I tried it didn't
open
> > properly
> > (showing only File/Edit/Data in the menu bar), and this wouldn't
close
> > properly
> > either.  The error message as above showed in the console.
> >
> > I haven't posted to the list before and would be very grateful for
> help.
> > Thank you.   Joyaa
> >         [[alternative HTML version deleted]]
> >
> > ______________________________________________
> > R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
> > https://stat.ethz.ch/mailman/listinfo/r-help
> > PLEASE do read the posting guide
> > http://www.R-project.org/posting-guide.html
> > and provide commented, minimal, self-contained, reproducible code.
> > =