Martin Maechler
2019-Jun-24 08:37 UTC
[Rd] Calculation of e^{z^2/2} for a normal deviate z
>>>>> William Dunlap via R-devel >>>>> on Sun, 23 Jun 2019 10:34:47 -0700 writes: >>>>> William Dunlap via R-devel >>>>> on Sun, 23 Jun 2019 10:34:47 -0700 writes:> include/Rmath.h declares a set of 'logspace' functions for use at the C > level. I don't think there are core R functions that call them. > /* Compute the log of a sum or difference from logs of terms, i.e., > * > * log (exp (logx) + exp (logy)) > * or log (exp (logx) - exp (logy)) > * > * without causing overflows or throwing away too much accuracy: > */ > double Rf_logspace_add(double logx, double logy); > double Rf_logspace_sub(double logx, double logy); > double Rf_logspace_sum(const double *logx, int nx); > Bill Dunlap > TIBCO Software > wdunlap tibco.com Yes, indeed, thank you, Bill! But they *have* been in use by core R functions for a long time in pgamma, pbeta and related functions. [and I have had changes in *hyper.c where logspace_add() is used too, for several years now (since 2015) but I no longer know which concrete accuracy problem that addresses, so have not yet committed it] Martin Maechler ETH Zurich and R Core Team > On Sun, Jun 23, 2019 at 1:40 AM Ben Bolker <bbolker at gmail.com> wrote: >> >> I agree with many the sentiments about the wisdom of computing very >> small p-values (although the example below may win some kind of a prize: >> I've seen people talking about p-values of the order of 10^(-2000), but >> never 10^(-(10^8)) !). That said, there are a several tricks for >> getting more reasonable sums of very small probabilities. The first is >> to scale the p-values by dividing the *largest* of the probabilities, >> then do the (p/sum(p)) computation, then multiply the result (I'm sure >> this is described/documented somewhere). More generally, there are >> methods for computing sums on the log scale, e.g. >> >> >> https://docs.scipy.org/doc/scipy-0.14.0/reference/generated/scipy.misc.logsumexp.html >> >> I don't know where this has been implemented in the R ecosystem, but >> this sort of computation is the basis of the "Brobdingnag" package for >> operating on very large ("Brobdingnagian") and very small >> ("Lilliputian") numbers. >> >> >> On 2019-06-21 6:58 p.m., jing hua zhao wrote: >> > Hi Peter, Rui, Chrstophe and Gabriel, >> > >> > Thanks for your inputs -- the use of qnorm(., log=TRUE) is a good point >> in line with pnorm with which we devised log(p) as >> > >> > log(2) + pnorm(-abs(z), lower.tail = TRUE, log.p = TRUE) >> > >> > that could do really really well for large z compared to Rmpfr. Maybe I >> am asking too much since >> > >> > z <-20000 >> >> Rmpfr::format(2*pnorm(mpfr(-abs(z),100),lower.tail=TRUE,log.p=FALSE)) >> > [1] "1.660579603192917090365313727164e-86858901" >> > >> > already gives a rarely seen small p value. I gather I also need a >> multiple precision exp() and their sum since exp(z^2/2) is also a Bayes >> Factor so I get log(x_i )/sum_i log(x_i) instead. To this point, I am >> obliged to clarify, see >> https://statgen.github.io/gwas-credible-sets/method/locuszoom-credible-sets.pdf >> . >> > >> > I agree many feel geneticists go to far with small p values which I >> would have difficulty to argue againston the other hand it is also expected >> to see these in a non-genetic context. For instance the Framingham study >> was established in 1948 just got $34m for six years on phenotypewide >> association which we would be interesting to see. >> > >> > Best wishes, >> > >> > >> > Jing Hua >> > >> > >> > ________________________________ >> > From: peter dalgaard <pdalgd at gmail.com> >> > Sent: 21 June 2019 16:24 >> > To: jing hua zhao >> > Cc: Rui Barradas; r-devel at r-project.org >> > Subject: Re: [Rd] Calculation of e^{z^2/2} for a normal deviate z >> > >> > You may want to look into using the log option to qnorm >> > >> > e.g., in round figures: >> > >> >> log(1e-300) >> > [1] -690.7755 >> >> qnorm(-691, log=TRUE) >> > [1] -37.05315 >> >> exp(37^2/2) >> > [1] 1.881797e+297 >> >> exp(-37^2/2) >> > [1] 5.314068e-298 >> > >> > Notice that floating point representation cuts out at 1e+/-308 or so. If >> you want to go outside that range, you may need explicit manipulation of >> the log values. qnorm() itself seems quite happy with much smaller values: >> > >> >> qnorm(-5000, log=TRUE) >> > [1] -99.94475 >> > >> > -pd >> > >> >> On 21 Jun 2019, at 17:11 , jing hua zhao <jinghuazhao at hotmail.com> >> wrote: >> >> >> >> Dear Rui, >> >> >> >> Thanks for your quick reply -- this allows me to see the bottom of >> this. I was hoping we could have a handle of those p in genmoics such as >> 1e-300 or smaller. >> >> >> >> Best wishes, >> >> >> >> >> >> Jing Hua >> >> >> >> ________________________________ >> >> From: Rui Barradas <ruipbarradas at sapo.pt> >> >> Sent: 21 June 2019 15:03 >> >> To: jing hua zhao; r-devel at r-project.org >> >> Subject: Re: [Rd] Calculation of e^{z^2/2} for a normal deviate z >> >> >> >> Hello, >> >> >> >> Well, try it: >> >> >> >> p <- .Machine$double.eps^seq(0.5, 1, by = 0.05) >> >> z <- qnorm(p/2) >> >> >> >> pnorm(z) >> >> # [1] 7.450581e-09 1.228888e-09 2.026908e-10 3.343152e-11 5.514145e-12 >> >> # [6] 9.094947e-13 1.500107e-13 2.474254e-14 4.080996e-15 6.731134e-16 >> >> #[11] 1.110223e-16 >> >> p/2 >> >> # [1] 7.450581e-09 1.228888e-09 2.026908e-10 3.343152e-11 5.514145e-12 >> >> # [6] 9.094947e-13 1.500107e-13 2.474254e-14 4.080996e-15 6.731134e-16 >> >> #[11] 1.110223e-16 >> >> >> >> exp(z*z/2) >> >> # [1] 9.184907e+06 5.301421e+07 3.073154e+08 1.787931e+09 1.043417e+10 >> >> # [6] 6.105491e+10 3.580873e+11 2.104460e+12 1.239008e+13 7.306423e+13 >> >> #[11] 4.314798e+14 >> >> >> >> >> >> p is the smallest possible such that 1 + p != 1 and I couldn't find >> >> anything to worry about. >> >> >> >> >> >> R version 3.6.0 (2019-04-26) >> >> Platform: x86_64-pc-linux-gnu (64-bit) >> >> Running under: Ubuntu 19.04 >> >> >> >> Matrix products: default >> >> BLAS: /usr/lib/x86_64-linux-gnu/blas/libblas.so.3.8.0 >> >> LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.8.0 >> >> >> >> locale: >> >> [1] LC_CTYPE=pt_PT.UTF-8 LC_NUMERIC=C >> >> [3] LC_TIME=pt_PT.UTF-8 LC_COLLATE=pt_PT.UTF-8 >> >> [5] LC_MONETARY=pt_PT.UTF-8 LC_MESSAGES=pt_PT.UTF-8 >> >> [7] LC_PAPER=pt_PT.UTF-8 LC_NAME=C >> >> [9] LC_ADDRESS=C LC_TELEPHONE=C >> >> [11] LC_MEASUREMENT=pt_PT.UTF-8 LC_IDENTIFICATION=C >> >> >> >> attached base packages: >> >> [1] stats graphics grDevices utils datasets methods >> >> [7] base >> >> >> >> other attached packages: >> >> >> >> [many packages loaded] >> >> >> >> >> >> Hope this helps, >> >> >> >> Rui Barradas >> >> >> >> ?s 15:24 de 21/06/19, jing hua zhao escreveu: >> >>> Dear R-developers, >> >>> >> >>> I am keen to calculate exp(z*z/2) with z=qnorm(p/2) and p is very >> small. I wonder if anyone has experience with this? >> >>> >> >>> Thanks very much in advance, >> >>> >> >>> >> >>> Jing Hua >> >>> >> >>> [[alternative HTML version deleted]] >> >>> >> >>> ______________________________________________ >> >>> R-devel at r-project.org mailing list >> >>> https://stat.ethz.ch/mailman/listinfo/r-devel >> >>> >> >> >> >> [[alternative HTML version deleted]] >> >> >> >> ______________________________________________ >> >> R-devel at r-project.org mailing list >> >> https://stat.ethz.ch/mailman/listinfo/r-devel >> > >> > -- >> > Peter Dalgaard, Professor, >> > Center for Statistics, Copenhagen Business School >> > Solbjerg Plads 3, 2000 Frederiksberg, Denmark >> > Phone: (+45)38153501 >> > Office: A 4.23 >> > Email: pd.mes at cbs.dk Priv: PDalgd at gmail.com >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > [[alternative HTML version deleted]] >> > >> > ______________________________________________ >> > R-devel at r-project.org mailing list >> > https://stat.ethz.ch/mailman/listinfo/r-devel >> > >> >> ______________________________________________ >> R-devel at r-project.org mailing list >> https://stat.ethz.ch/mailman/listinfo/r-devel >> > [[alternative HTML version deleted]] > ______________________________________________ > R-devel at r-project.org mailing list > https://stat.ethz.ch/mailman/listinfo/r-devel
Hi All, Thanks for all your comments which allows me to appreciate more of these in Python and R. I just came across the matrixStats package, ## EXAMPLE #1 lx <- c(1000.01, 1000.02) y0 <- log(sum(exp(lx))) print(y0) ## Inf y1 <- logSumExp(lx) print(y1) ## 1000.708 and> ly <- lx*100000 > ly[1] 100001000 100002000> y1 <- logSumExp(ly) > print(y1)[1] 100002000> logSumExpfunction (lx, idxs = NULL, na.rm = FALSE, ...) { has_na <- TRUE .Call(C_logSumExp, as.numeric(lx), idxs, as.logical(na.rm), has_na) } <bytecode: 0x20c07a8> <environment: namespace:matrixStats> Maybe this is rather close? Best wishes, Jing Hua ________________________________ From: R-devel <r-devel-bounces at r-project.org> on behalf of Martin Maechler <maechler at stat.math.ethz.ch> Sent: 24 June 2019 08:37 To: William Dunlap Cc: r-devel at r-project.org Subject: Re: [Rd] Calculation of e^{z^2/2} for a normal deviate z>>>>> William Dunlap via R-devel >>>>> on Sun, 23 Jun 2019 10:34:47 -0700 writes: >>>>> William Dunlap via R-devel >>>>> on Sun, 23 Jun 2019 10:34:47 -0700 writes:> include/Rmath.h declares a set of 'logspace' functions for use at the C > level. I don't think there are core R functions that call them. > /* Compute the log of a sum or difference from logs of terms, i.e., > * > * log (exp (logx) + exp (logy)) > * or log (exp (logx) - exp (logy)) > * > * without causing overflows or throwing away too much accuracy: > */ > double Rf_logspace_add(double logx, double logy); > double Rf_logspace_sub(double logx, double logy); > double Rf_logspace_sum(const double *logx, int nx); > Bill Dunlap > TIBCO Software > wdunlap tibco.com Yes, indeed, thank you, Bill! But they *have* been in use by core R functions for a long time in pgamma, pbeta and related functions. [and I have had changes in *hyper.c where logspace_add() is used too, for several years now (since 2015) but I no longer know which concrete accuracy problem that addresses, so have not yet committed it] Martin Maechler ETH Zurich and R Core Team > On Sun, Jun 23, 2019 at 1:40 AM Ben Bolker <bbolker at gmail.com> wrote: >> >> I agree with many the sentiments about the wisdom of computing very >> small p-values (although the example below may win some kind of a prize: >> I've seen people talking about p-values of the order of 10^(-2000), but >> never 10^(-(10^8)) !). That said, there are a several tricks for >> getting more reasonable sums of very small probabilities. The first is >> to scale the p-values by dividing the *largest* of the probabilities, >> then do the (p/sum(p)) computation, then multiply the result (I'm sure >> this is described/documented somewhere). More generally, there are >> methods for computing sums on the log scale, e.g. >> >> >> https://docs.scipy.org/doc/scipy-0.14.0/reference/generated/scipy.misc.logsumexp.html >> >> I don't know where this has been implemented in the R ecosystem, but >> this sort of computation is the basis of the "Brobdingnag" package for >> operating on very large ("Brobdingnagian") and very small >> ("Lilliputian") numbers. >> >> >> On 2019-06-21 6:58 p.m., jing hua zhao wrote: >> > Hi Peter, Rui, Chrstophe and Gabriel, >> > >> > Thanks for your inputs -- the use of qnorm(., log=TRUE) is a good point >> in line with pnorm with which we devised log(p) as >> > >> > log(2) + pnorm(-abs(z), lower.tail = TRUE, log.p = TRUE) >> > >> > that could do really really well for large z compared to Rmpfr. Maybe I >> am asking too much since >> > >> > z <-20000 >> >> Rmpfr::format(2*pnorm(mpfr(-abs(z),100),lower.tail=TRUE,log.p=FALSE)) >> > [1] "1.660579603192917090365313727164e-86858901" >> > >> > already gives a rarely seen small p value. I gather I also need a >> multiple precision exp() and their sum since exp(z^2/2) is also a Bayes >> Factor so I get log(x_i )/sum_i log(x_i) instead. To this point, I am >> obliged to clarify, see >> https://statgen.github.io/gwas-credible-sets/method/locuszoom-credible-sets.pdf >> . >> > >> > I agree many feel geneticists go to far with small p values which I >> would have difficulty to argue againston the other hand it is also expected >> to see these in a non-genetic context. For instance the Framingham study >> was established in 1948 just got $34m for six years on phenotypewide >> association which we would be interesting to see. >> > >> > Best wishes, >> > >> > >> > Jing Hua >> > >> > >> > ________________________________ >> > From: peter dalgaard <pdalgd at gmail.com> >> > Sent: 21 June 2019 16:24 >> > To: jing hua zhao >> > Cc: Rui Barradas; r-devel at r-project.org >> > Subject: Re: [Rd] Calculation of e^{z^2/2} for a normal deviate z >> > >> > You may want to look into using the log option to qnorm >> > >> > e.g., in round figures: >> > >> >> log(1e-300) >> > [1] -690.7755 >> >> qnorm(-691, log=TRUE) >> > [1] -37.05315 >> >> exp(37^2/2) >> > [1] 1.881797e+297 >> >> exp(-37^2/2) >> > [1] 5.314068e-298 >> > >> > Notice that floating point representation cuts out at 1e+/-308 or so. If >> you want to go outside that range, you may need explicit manipulation of >> the log values. qnorm() itself seems quite happy with much smaller values: >> > >> >> qnorm(-5000, log=TRUE) >> > [1] -99.94475 >> > >> > -pd >> > >> >> On 21 Jun 2019, at 17:11 , jing hua zhao <jinghuazhao at hotmail.com> >> wrote: >> >> >> >> Dear Rui, >> >> >> >> Thanks for your quick reply -- this allows me to see the bottom of >> this. I was hoping we could have a handle of those p in genmoics such as >> 1e-300 or smaller. >> >> >> >> Best wishes, >> >> >> >> >> >> Jing Hua >> >> >> >> ________________________________ >> >> From: Rui Barradas <ruipbarradas at sapo.pt> >> >> Sent: 21 June 2019 15:03 >> >> To: jing hua zhao; r-devel at r-project.org >> >> Subject: Re: [Rd] Calculation of e^{z^2/2} for a normal deviate z >> >> >> >> Hello, >> >> >> >> Well, try it: >> >> >> >> p <- .Machine$double.eps^seq(0.5, 1, by = 0.05) >> >> z <- qnorm(p/2) >> >> >> >> pnorm(z) >> >> # [1] 7.450581e-09 1.228888e-09 2.026908e-10 3.343152e-11 5.514145e-12 >> >> # [6] 9.094947e-13 1.500107e-13 2.474254e-14 4.080996e-15 6.731134e-16 >> >> #[11] 1.110223e-16 >> >> p/2 >> >> # [1] 7.450581e-09 1.228888e-09 2.026908e-10 3.343152e-11 5.514145e-12 >> >> # [6] 9.094947e-13 1.500107e-13 2.474254e-14 4.080996e-15 6.731134e-16 >> >> #[11] 1.110223e-16 >> >> >> >> exp(z*z/2) >> >> # [1] 9.184907e+06 5.301421e+07 3.073154e+08 1.787931e+09 1.043417e+10 >> >> # [6] 6.105491e+10 3.580873e+11 2.104460e+12 1.239008e+13 7.306423e+13 >> >> #[11] 4.314798e+14 >> >> >> >> >> >> p is the smallest possible such that 1 + p != 1 and I couldn't find >> >> anything to worry about. >> >> >> >> >> >> R version 3.6.0 (2019-04-26) >> >> Platform: x86_64-pc-linux-gnu (64-bit) >> >> Running under: Ubuntu 19.04 >> >> >> >> Matrix products: default >> >> BLAS: /usr/lib/x86_64-linux-gnu/blas/libblas.so.3.8.0 >> >> LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.8.0 >> >> >> >> locale: >> >> [1] LC_CTYPE=pt_PT.UTF-8 LC_NUMERIC=C >> >> [3] LC_TIME=pt_PT.UTF-8 LC_COLLATE=pt_PT.UTF-8 >> >> [5] LC_MONETARY=pt_PT.UTF-8 LC_MESSAGES=pt_PT.UTF-8 >> >> [7] LC_PAPER=pt_PT.UTF-8 LC_NAME=C >> >> [9] LC_ADDRESS=C LC_TELEPHONE=C >> >> [11] LC_MEASUREMENT=pt_PT.UTF-8 LC_IDENTIFICATION=C >> >> >> >> attached base packages: >> >> [1] stats graphics grDevices utils datasets methods >> >> [7] base >> >> >> >> other attached packages: >> >> >> >> [many packages loaded] >> >> >> >> >> >> Hope this helps, >> >> >> >> Rui Barradas >> >> >> >> ?s 15:24 de 21/06/19, jing hua zhao escreveu: >> >>> Dear R-developers, >> >>> >> >>> I am keen to calculate exp(z*z/2) with z=qnorm(p/2) and p is very >> small. I wonder if anyone has experience with this? >> >>> >> >>> Thanks very much in advance, >> >>> >> >>> >> >>> Jing Hua >> >>> >> >>> [[alternative HTML version deleted]] >> >>> >> >>> ______________________________________________ >> >>> R-devel at r-project.org mailing list >> >>> https://stat.ethz.ch/mailman/listinfo/r-devel >> >>> >> >> >> >> [[alternative HTML version deleted]] >> >> >> >> ______________________________________________ >> >> R-devel at r-project.org mailing list >> >> https://stat.ethz.ch/mailman/listinfo/r-devel >> > >> > -- >> > Peter Dalgaard, Professor, >> > Center for Statistics, Copenhagen Business School >> > Solbjerg Plads 3, 2000 Frederiksberg, Denmark >> > Phone: (+45)38153501 >> > Office: A 4.23 >> > Email: pd.mes at cbs.dk Priv: PDalgd at gmail.com >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > [[alternative HTML version deleted]] >> > >> > ______________________________________________ >> > R-devel at r-project.org mailing list >> > https://stat.ethz.ch/mailman/listinfo/r-devel >> > >> >> ______________________________________________ >> R-devel at r-project.org mailing list >> https://stat.ethz.ch/mailman/listinfo/r-devel >> > [[alternative HTML version deleted]] > ______________________________________________ > R-devel at r-project.org mailing list > https://stat.ethz.ch/mailman/listinfo/r-devel ______________________________________________ R-devel at r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-devel [[alternative HTML version deleted]]
Martin Maechler
2019-Jun-24 09:29 UTC
[Rd] Calculation of e^{z^2/2} for a normal deviate z
>>>>> jing hua zhao >>>>> on Mon, 24 Jun 2019 08:51:43 +0000 writes:> Hi All, > Thanks for all your comments which allows me to appreciate more of these in Python and R. > I just came across the matrixStats package, > ## EXAMPLE #1 > lx <- c(1000.01, 1000.02) > y0 <- log(sum(exp(lx))) > print(y0) ## Inf > y1 <- logSumExp(lx) > print(y1) ## 1000.708 > and >> ly <- lx*100000 >> ly > [1] 100001000 100002000 >> y1 <- logSumExp(ly) >> print(y1) > [1] 100002000 >> logSumExp > function (lx, idxs = NULL, na.rm = FALSE, ...) > { > has_na <- TRUE > .Call(C_logSumExp, as.numeric(lx), idxs, as.logical(na.rm), > has_na) > } > <bytecode: 0x20c07a8> > <environment: namespace:matrixStats> > Maybe this is rather close? Thank you Jing Hua, indeed the issue of sums of (very large or very small) exponentials is a special case, that can well be treated specially - as it is not so infrequent - via "obvious" simplifications can be implemented even more accurately We (authors of the R package 'copula') have had a need for these as well, in likelihood computation for Archimedean copulas, and have efficient R level implementations, both for your case and the -- even more delicate -- case of e.g., alternating signs of exponential terms. "Unfortunately", we had never exported the functions from the package, so you'd need copula:::lsum() # log sum {of exponentials in log scale} or copula:::lssum() # log *s*igned sum {of exponentials in log scale} for the 2nd case. The advantage is it's simple R code implemented quite efficiently for the vector and matrices cases, Source code from source file copula/R/special-func.R (in svn at R-forge : --> https://r-forge.r-project.org/scm/viewvc.php/pkg/copula/R/special-func.R?view=markup&root=copula ) {Yes, this GPL-2 licenced {with Copyright, see file, please keep this one line} ## Copyright (C) 2012 Marius Hofert, Ivan Kojadinovic, Martin Maechler, and Jun Y } ---------------------------------------------------------------------- ##' Properly compute log(x_1 + .. + x_n) for a given (n x d)-matrix of n row ##' vectors log(x_1),..,log(x_n) (each of dimension d) ##' Here, x_i > 0 for all i ##' @title Properly compute the logarithm of a sum ##' @param lx (n,d)-matrix containing the row vectors log(x_1),..,log(x_n) ##' each of dimension d ##' @param l.off the offset to subtract and re-add; ideally in the order of ##' the maximum of each column ##' @return log(x_1 + .. + x_n) [i.e., OF DIMENSION d!!!] computed via ##' log(sum(x)) = log(sum(exp(log(x)))) ##' = log(exp(log(x_max))*sum(exp(log(x)-log(x_max)))) ##' = log(x_max) + log(sum(exp(log(x)-log(x_max))))) ##' = lx.max + log(sum(exp(lx-lx.max))) ##' => VECTOR OF DIMENSION d ##' @author Marius Hofert, Martin Maechler lsum <- function(lx, l.off) { rx <- length(d <- dim(lx)) if(mis.off <- missing(l.off)) l.off <- { if(rx <= 1L) max(lx) else if(rx == 2L) apply(lx, 2L, max) } if(rx <= 1L) { ## vector if(is.finite(l.off)) l.off + log(sum(exp(lx - l.off))) else if(mis.off || is.na(l.off) || l.off == max(lx)) l.off # NA || NaN or all lx == -Inf, or max(.) == Inf else stop("'l.off is infinite but not == max(.)") } else if(rx == 2L) { ## matrix if(any(x.off <- !is.finite(l.off))) { if(mis.off || isTRUE(all.equal(l.off, apply(lx, 2L, max)))) { ## we know l.off = colMax(.) if(all(x.off)) return(l.off) r <- l.off iok <- which(!x.off) l.of <- l.off[iok] r[iok] <- l.of + log(colSums(exp(lx[,iok,drop=FALSE] - rep(l.of, each=d[1])))) r } else ## explicitly specified l.off differing from colMax(.) stop("'l.off' has non-finite values but differs from default max(.)") } else l.off + log(colSums(exp(lx - rep(l.off, each=d[1])))) } else stop("not yet implemented for arrays of rank >= 3") } ##' Properly compute log(x_1 + .. + x_n) for a given matrix of column vectors ##' log(|x_1|),.., log(|x_n|) and corresponding signs sign(x_1),.., sign(x_n) ##' Here, x_i is of arbitrary sign ##' @title compute logarithm of a sum with signed large coefficients ##' @param lxabs (d,n)-matrix containing the column vectors log(|x_1|),..,log(|x_n|) ##' each of dimension d ##' @param signs corresponding matrix of signs sign(x_1), .., sign(x_n) ##' @param l.off the offset to subtract and re-add; ideally in the order of max(.) ##' @param strict logical indicating if it should stop on some negative sums ##' @return log(x_1 + .. + x_n) [i.e., of dimension d] computed via ##' log(sum(x)) = log(sum(sign(x)*|x|)) = log(sum(sign(x)*exp(log(|x|)))) ##' = log(exp(log(x0))*sum(signs*exp(log(|x|)-log(x0)))) ##' = log(x0) + log(sum(signs* exp(log(|x|)-log(x0)))) ##' = l.off + log(sum(signs* exp(lxabs - l.off ))) ##' @author Marius Hofert and Martin Maechler lssum <- function (lxabs, signs, l.off = apply(lxabs, 2, max), strict = TRUE) { stopifnot(length(dim(lxabs)) == 2L) # is.matrix(.) generalized sum. <- colSums(signs * exp(lxabs - rep(l.off, each=nrow(lxabs)))) if(anyNA(sum.) || any(sum. <= 0)) (if(strict) stop else warning)("lssum found non-positive sums") l.off + log(sum.) } ---------------------------------------------------------------------- > Best wishes, > Jing Hua > ________________________________ > From: R-devel <r-devel-bounces at r-project.org> on behalf of Martin Maechler <maechler at stat.math.ethz.ch> > Sent: 24 June 2019 08:37 > To: William Dunlap > Cc: r-devel at r-project.org > Subject: Re: [Rd] Calculation of e^{z^2/2} for a normal deviate z>>>>> William Dunlap via R-devel >>>>> on Sun, 23 Jun 2019 10:34:47 -0700 writes: >>>>> William Dunlap via R-devel >>>>> on Sun, 23 Jun 2019 10:34:47 -0700 writes:>> include/Rmath.h declares a set of 'logspace' functions for use at the C >> level. I don't think there are core R functions that call them. >> /* Compute the log of a sum or difference from logs of terms, i.e., >> * >> * log (exp (logx) + exp (logy)) >> * or log (exp (logx) - exp (logy)) >> * >> * without causing overflows or throwing away too much accuracy: >> */ >> double Rf_logspace_add(double logx, double logy); >> double Rf_logspace_sub(double logx, double logy); >> double Rf_logspace_sum(const double *logx, int nx); >> Bill Dunlap >> TIBCO Software >> wdunlap tibco.com > Yes, indeed, thank you, Bill! > But they *have* been in use by core R functions for a long time > in pgamma, pbeta and related functions. > [and I have had changes in *hyper.c where logspace_add() is used too, > for several years now (since 2015) but I no longer know which > concrete accuracy problem that addresses, so have not yet committed it] > Martin Maechler > ETH Zurich and R Core Team
Possibly Parallel Threads
- Calculation of e^{z^2/2} for a normal deviate z
- multiple summation
- nrow(rbind(character(), character())) returns 2 (as documented but very unintuitive, IMHO)
- Gini coefficient in R
- Implementation for selecting lag of a lag window spectral estimator using generalized cross validation (using deviance)