R devel - Dec 2016 - getGraphicsEvent() alternative for cairo graphics device?

Hi

The current status is that I am keen for people to contribute some 
testing code (see https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16951)

There were also some getGraphicsEvent() changes/fixes suggested by 
Richard Bodewits (cc'ed), for which I am also seeking test code.

Paul

On 13/11/16 09:00, frederik at ofb.net wrote:
> Hi Paul,
>
> Just checking in to see what the status is.
>
> From my perspective it seems logical to split off X11 into a separate
> package, so development can proceed at a reasonable rate, but I
> haven't yet tried to see if that's even possible.
>
> Thanks,
>
> Frederick
>
> On Tue, Jul 26, 2016 at 09:23:35AM +1200, Paul Murrell wrote:
>> Hi
>>
>> Taking a look at those patches is now on my todo list, so I may be in
touch
>> with both of you at some point to request some testing.
>>
>> Paul
>>
>> On 26/07/16 07:17, frederik at ofb.net wrote:
>>> Dear Daniel Greenidge,
>>>
>>> To enable getGraphicsEvent on Cairo, you have two patches to choose
>>> from:
>>>
>>> https://bugs.r-project.org/bugzilla/show_bug.cgi?id=14364
>>> https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16951
>>>
>>> The second one is by me, and the first one is from five years ago
by
>>> Hugo Mildenberger.
>>>
>>> Both patches are very simple, they move some lines enabling
>>> getGrahpicsEvent outside of a if(!cairo) statement. My patch also
adds
>>> the ability to execute code (e.g. for animation) while the
interface
>>> is idle.
>>>
>>> Top guy Duncan Murdoch has expressed that he doesn't have time
to work
>>> on applying these patches, and I haven't had any responses from
the
>>> rest of the R Core Team. I was thinking that perhaps your best bet
is
>>> to try to create a package called e.g. "X11-fixes" which
people can
>>> use to get a better X11 library (there is also a bug waiting to be
>>> fixed from 2001:
>>> https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16702).
>>>
>>> I don't know if CRAN would accept such a package, or if
you'd have to
>>> distribute it via GitHub, but R has excellent tools to facilitate
the
>>> distribution of code via packages. Whether the R kernel exports
enough
>>> functions to allow a package to take over event handling, I'm
not
>>> sure. I was intending to look more into the details of this
>>> possibility but haven't had time.
>>>
>>> Best wishes,
>>>
>>> Frederick
>>>
>>> On Mon, Jul 25, 2016 at 02:15:59PM -0400, Daniel Greenidge wrote:
>>>> Hi all,
>>>>
>>>> I'm writing an interactive plotting function for viewing
fMRI
>>>> datasets. Currently, I get keypresses using
>>>> grDevices::getGraphicsEvent().
>>>>
>>>> Unfortunately getGraphicsEvent() only supports the
X11(type="Xlib")
>>>> graphics device on Unix systems. The Xlib device doesn't
support
>>>> buffering (i.e. dev.hold() and dev.flush()), so redrawing the
plots
>>>> causes lots of flickering.
>>>>
>>>> Is there a way to get keypresses while using the cairo graphics
>>>> device? Alternatively, is there a way to prevent flickering
with the
>>>> Xlib graphics device?
>>>>
>>>> Best,
>>>> Daniel Greenidge
>>>>
>>>> ______________________________________________
>>>> R-devel at r-project.org mailing list
>>>> https://stat.ethz.ch/mailman/listinfo/r-devel
>>>>
>>>
>>> ______________________________________________
>>> R-devel at r-project.org mailing list
>>> https://stat.ethz.ch/mailman/listinfo/r-devel
>>>
>>
>> --
>> Dr Paul Murrell
>> Department of Statistics
>> The University of Auckland
>> Private Bag 92019
>> Auckland
>> New Zealand
>> 64 9 3737599 x85392
>> paul at stat.auckland.ac.nz
>> http://www.stat.auckland.ac.nz/~paul/
>>
-- 
Dr Paul Murrell
Department of Statistics
The University of Auckland
Private Bag 92019
Auckland
New Zealand
64 9 3737599 x85392
paul at stat.auckland.ac.nz
http://www.stat.auckland.ac.nz/~paul/

Hi Paul,

Thank you, for some reason I didn't seem to get an email notification
for your bugzilla comment!

I will try to send you something shortly.

Frederick

On Mon, Nov 14, 2016 at 08:55:20AM +1300, Paul Murrell
wrote:
> Hi
> 
> The current status is that I am keen for people to contribute some testing
> code (see https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16951)
> 
> There were also some getGraphicsEvent() changes/fixes suggested by Richard
> Bodewits (cc'ed), for which I am also seeking test code.
> 
> Paul
> 
> On 13/11/16 09:00, frederik at ofb.net wrote:
> > Hi Paul,
> > 
> > Just checking in to see what the status is.
> > 
> > From my perspective it seems logical to split off X11 into a separate
> > package, so development can proceed at a reasonable rate, but I
> > haven't yet tried to see if that's even possible.
> > 
> > Thanks,
> > 
> > Frederick
> > 
> > On Tue, Jul 26, 2016 at 09:23:35AM +1200, Paul Murrell wrote:
> > > Hi
> > > 
> > > Taking a look at those patches is now on my todo list, so I may
be in touch
> > > with both of you at some point to request some testing.
> > > 
> > > Paul
> > > 
> > > On 26/07/16 07:17, frederik at ofb.net wrote:
> > > > Dear Daniel Greenidge,
> > > > 
> > > > To enable getGraphicsEvent on Cairo, you have two patches to
choose
> > > > from:
> > > > 
> > > > https://bugs.r-project.org/bugzilla/show_bug.cgi?id=14364
> > > > https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16951
> > > > 
> > > > The second one is by me, and the first one is from five
years ago by
> > > > Hugo Mildenberger.
> > > > 
> > > > Both patches are very simple, they move some lines enabling
> > > > getGrahpicsEvent outside of a if(!cairo) statement. My patch
also adds
> > > > the ability to execute code (e.g. for animation) while the
interface
> > > > is idle.
> > > > 
> > > > Top guy Duncan Murdoch has expressed that he doesn't
have time to work
> > > > on applying these patches, and I haven't had any
responses from the
> > > > rest of the R Core Team. I was thinking that perhaps your
best bet is
> > > > to try to create a package called e.g. "X11-fixes"
which people can
> > > > use to get a better X11 library (there is also a bug waiting
to be
> > > > fixed from 2001:
> > > > https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16702).
> > > > 
> > > > I don't know if CRAN would accept such a package, or if
you'd have to
> > > > distribute it via GitHub, but R has excellent tools to
facilitate the
> > > > distribution of code via packages. Whether the R kernel
exports enough
> > > > functions to allow a package to take over event handling,
I'm not
> > > > sure. I was intending to look more into the details of this
> > > > possibility but haven't had time.
> > > > 
> > > > Best wishes,
> > > > 
> > > > Frederick
> > > > 
> > > > On Mon, Jul 25, 2016 at 02:15:59PM -0400, Daniel Greenidge
wrote:
> > > > > Hi all,
> > > > > 
> > > > > I'm writing an interactive plotting function for
viewing fMRI
> > > > > datasets. Currently, I get keypresses using
> > > > > grDevices::getGraphicsEvent().
> > > > > 
> > > > > Unfortunately getGraphicsEvent() only supports the
X11(type="Xlib")
> > > > > graphics device on Unix systems. The Xlib device
doesn't support
> > > > > buffering (i.e. dev.hold() and dev.flush()), so
redrawing the plots
> > > > > causes lots of flickering.
> > > > > 
> > > > > Is there a way to get keypresses while using the cairo
graphics
> > > > > device? Alternatively, is there a way to prevent
flickering with the
> > > > > Xlib graphics device?
> > > > > 
> > > > > Best,
> > > > > Daniel Greenidge
> > > > > 
> > > > > ______________________________________________
> > > > > R-devel at r-project.org mailing list
> > > > > https://stat.ethz.ch/mailman/listinfo/r-devel
> > > > > 
> > > > 
> > > > ______________________________________________
> > > > R-devel at r-project.org mailing list
> > > > https://stat.ethz.ch/mailman/listinfo/r-devel
> > > > 
> > > 
> > > --
> > > Dr Paul Murrell
> > > Department of Statistics
> > > The University of Auckland
> > > Private Bag 92019
> > > Auckland
> > > New Zealand
> > > 64 9 3737599 x85392
> > > paul at stat.auckland.ac.nz
> > > http://www.stat.auckland.ac.nz/~paul/
> > > 
> 
> -- 
> Dr Paul Murrell
> Department of Statistics
> The University of Auckland
> Private Bag 92019
> Auckland
> New Zealand
> 64 9 3737599 x85392
> paul at stat.auckland.ac.nz
> http://www.stat.auckland.ac.nz/~paul/
>

Great.  Thanks!

Paul

On 14/11/16 13:41, frederik at ofb.net wrote:
> Hi Paul,
>
> Thank you, for some reason I didn't seem to get an email notification
> for your bugzilla comment!
>
> I will try to send you something shortly.
>
> Frederick
>
> On Mon, Nov 14, 2016 at 08:55:20AM +1300, Paul Murrell wrote:
>> Hi
>>
>> The current status is that I am keen for people to contribute some
testing
>> code (see https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16951)
>>
>> There were also some getGraphicsEvent() changes/fixes suggested by
Richard
>> Bodewits (cc'ed), for which I am also seeking test code.
>>
>> Paul
>>
>> On 13/11/16 09:00, frederik at ofb.net wrote:
>>> Hi Paul,
>>>
>>> Just checking in to see what the status is.
>>>
>>> From my perspective it seems logical to split off X11 into a
separate
>>> package, so development can proceed at a reasonable rate, but I
>>> haven't yet tried to see if that's even possible.
>>>
>>> Thanks,
>>>
>>> Frederick
>>>
>>> On Tue, Jul 26, 2016 at 09:23:35AM +1200, Paul Murrell wrote:
>>>> Hi
>>>>
>>>> Taking a look at those patches is now on my todo list, so I may
be in touch
>>>> with both of you at some point to request some testing.
>>>>
>>>> Paul
>>>>
>>>> On 26/07/16 07:17, frederik at ofb.net wrote:
>>>>> Dear Daniel Greenidge,
>>>>>
>>>>> To enable getGraphicsEvent on Cairo, you have two patches
to choose
>>>>> from:
>>>>>
>>>>> https://bugs.r-project.org/bugzilla/show_bug.cgi?id=14364
>>>>> https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16951
>>>>>
>>>>> The second one is by me, and the first one is from five
years ago by
>>>>> Hugo Mildenberger.
>>>>>
>>>>> Both patches are very simple, they move some lines enabling
>>>>> getGrahpicsEvent outside of a if(!cairo) statement. My
patch also adds
>>>>> the ability to execute code (e.g. for animation) while the
interface
>>>>> is idle.
>>>>>
>>>>> Top guy Duncan Murdoch has expressed that he doesn't
have time to work
>>>>> on applying these patches, and I haven't had any
responses from the
>>>>> rest of the R Core Team. I was thinking that perhaps your
best bet is
>>>>> to try to create a package called e.g.
"X11-fixes" which people can
>>>>> use to get a better X11 library (there is also a bug
waiting to be
>>>>> fixed from 2001:
>>>>> https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16702).
>>>>>
>>>>> I don't know if CRAN would accept such a package, or if
you'd have to
>>>>> distribute it via GitHub, but R has excellent tools to
facilitate the
>>>>> distribution of code via packages. Whether the R kernel
exports enough
>>>>> functions to allow a package to take over event handling,
I'm not
>>>>> sure. I was intending to look more into the details of this
>>>>> possibility but haven't had time.
>>>>>
>>>>> Best wishes,
>>>>>
>>>>> Frederick
>>>>>
>>>>> On Mon, Jul 25, 2016 at 02:15:59PM -0400, Daniel Greenidge
wrote:
>>>>>> Hi all,
>>>>>>
>>>>>> I'm writing an interactive plotting function for
viewing fMRI
>>>>>> datasets. Currently, I get keypresses using
>>>>>> grDevices::getGraphicsEvent().
>>>>>>
>>>>>> Unfortunately getGraphicsEvent() only supports the
X11(type="Xlib")
>>>>>> graphics device on Unix systems. The Xlib device
doesn't support
>>>>>> buffering (i.e. dev.hold() and dev.flush()), so
redrawing the plots
>>>>>> causes lots of flickering.
>>>>>>
>>>>>> Is there a way to get keypresses while using the cairo
graphics
>>>>>> device? Alternatively, is there a way to prevent
flickering with the
>>>>>> Xlib graphics device?
>>>>>>
>>>>>> Best,
>>>>>> Daniel Greenidge
>>>>>>
>>>>>> ______________________________________________
>>>>>> R-devel at r-project.org mailing list
>>>>>> https://stat.ethz.ch/mailman/listinfo/r-devel
>>>>>>
>>>>>
>>>>> ______________________________________________
>>>>> R-devel at r-project.org mailing list
>>>>> https://stat.ethz.ch/mailman/listinfo/r-devel
>>>>>
>>>>
>>>> --
>>>> Dr Paul Murrell
>>>> Department of Statistics
>>>> The University of Auckland
>>>> Private Bag 92019
>>>> Auckland
>>>> New Zealand
>>>> 64 9 3737599 x85392
>>>> paul at stat.auckland.ac.nz
>>>> http://www.stat.auckland.ac.nz/~paul/
>>>>
>>
>> --
>> Dr Paul Murrell
>> Department of Statistics
>> The University of Auckland
>> Private Bag 92019
>> Auckland
>> New Zealand
>> 64 9 3737599 x85392
>> paul at stat.auckland.ac.nz
>> http://www.stat.auckland.ac.nz/~paul/
>>
-- 
Dr Paul Murrell
Department of Statistics
The University of Auckland
Private Bag 92019
Auckland
New Zealand
64 9 3737599 x85392
paul at stat.auckland.ac.nz
http://www.stat.auckland.ac.nz/~paul/

Hi Paul,

Thanks for your efforts. Do you have an idea when my patch(es) might
be committed? Is there anything I can do to help move this along?

Thanks,

Frederick

On Mon, Nov 14, 2016 at 08:55:20AM +1300, Paul Murrell
wrote:
> Hi
> 
> The current status is that I am keen for people to contribute some testing
> code (see https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16951)
> 
> There were also some getGraphicsEvent() changes/fixes suggested by Richard
> Bodewits (cc'ed), for which I am also seeking test code.
> 
> Paul
> 
> On 13/11/16 09:00, frederik at ofb.net wrote:
> > Hi Paul,
> > 
> > Just checking in to see what the status is.
> > 
> > From my perspective it seems logical to split off X11 into a separate
> > package, so development can proceed at a reasonable rate, but I
> > haven't yet tried to see if that's even possible.
> > 
> > Thanks,
> > 
> > Frederick
> > 
> > On Tue, Jul 26, 2016 at 09:23:35AM +1200, Paul Murrell wrote:
> > > Hi
> > > 
> > > Taking a look at those patches is now on my todo list, so I may
be in touch
> > > with both of you at some point to request some testing.
> > > 
> > > Paul
> > > 
> > > On 26/07/16 07:17, frederik at ofb.net wrote:
> > > > Dear Daniel Greenidge,
> > > > 
> > > > To enable getGraphicsEvent on Cairo, you have two patches to
choose
> > > > from:
> > > > 
> > > > https://bugs.r-project.org/bugzilla/show_bug.cgi?id=14364
> > > > https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16951
> > > > 
> > > > The second one is by me, and the first one is from five
years ago by
> > > > Hugo Mildenberger.
> > > > 
> > > > Both patches are very simple, they move some lines enabling
> > > > getGrahpicsEvent outside of a if(!cairo) statement. My patch
also adds
> > > > the ability to execute code (e.g. for animation) while the
interface
> > > > is idle.
> > > > 
> > > > Top guy Duncan Murdoch has expressed that he doesn't
have time to work
> > > > on applying these patches, and I haven't had any
responses from the
> > > > rest of the R Core Team. I was thinking that perhaps your
best bet is
> > > > to try to create a package called e.g. "X11-fixes"
which people can
> > > > use to get a better X11 library (there is also a bug waiting
to be
> > > > fixed from 2001:
> > > > https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16702).
> > > > 
> > > > I don't know if CRAN would accept such a package, or if
you'd have to
> > > > distribute it via GitHub, but R has excellent tools to
facilitate the
> > > > distribution of code via packages. Whether the R kernel
exports enough
> > > > functions to allow a package to take over event handling,
I'm not
> > > > sure. I was intending to look more into the details of this
> > > > possibility but haven't had time.
> > > > 
> > > > Best wishes,
> > > > 
> > > > Frederick
> > > > 
> > > > On Mon, Jul 25, 2016 at 02:15:59PM -0400, Daniel Greenidge
wrote:
> > > > > Hi all,
> > > > > 
> > > > > I'm writing an interactive plotting function for
viewing fMRI
> > > > > datasets. Currently, I get keypresses using
> > > > > grDevices::getGraphicsEvent().
> > > > > 
> > > > > Unfortunately getGraphicsEvent() only supports the
X11(type="Xlib")
> > > > > graphics device on Unix systems. The Xlib device
doesn't support
> > > > > buffering (i.e. dev.hold() and dev.flush()), so
redrawing the plots
> > > > > causes lots of flickering.
> > > > > 
> > > > > Is there a way to get keypresses while using the cairo
graphics
> > > > > device? Alternatively, is there a way to prevent
flickering with the
> > > > > Xlib graphics device?
> > > > > 
> > > > > Best,
> > > > > Daniel Greenidge
> > > > > 
> > > > > ______________________________________________
> > > > > R-devel at r-project.org mailing list
> > > > > https://stat.ethz.ch/mailman/listinfo/r-devel
> > > > > 
> > > > 
> > > > ______________________________________________
> > > > R-devel at r-project.org mailing list
> > > > https://stat.ethz.ch/mailman/listinfo/r-devel
> > > > 
> > > 
> > > --
> > > Dr Paul Murrell
> > > Department of Statistics
> > > The University of Auckland
> > > Private Bag 92019
> > > Auckland
> > > New Zealand
> > > 64 9 3737599 x85392
> > > paul at stat.auckland.ac.nz
> > > http://www.stat.auckland.ac.nz/~paul/
> > > 
> 
> -- 
> Dr Paul Murrell
> Department of Statistics
> The University of Auckland
> Private Bag 92019
> Auckland
> New Zealand
> 64 9 3737599 x85392
> paul at stat.auckland.ac.nz
> http://www.stat.auckland.ac.nz/~paul/
>

Hi

Just taking a bit more of a look at this today (currently fixated on 
making sure I can build some good regression tests).

The best thing you can do is to keep reminding me like this :)

Paul

On 09/12/16 11:19, frederik at ofb.net wrote:
> Hi Paul,
>
> Thanks for your efforts. Do you have an idea when my patch(es) might
> be committed? Is there anything I can do to help move this along?
>
> Thanks,
>
> Frederick
>
> On Mon, Nov 14, 2016 at 08:55:20AM +1300, Paul Murrell wrote:
>> Hi
>>
>> The current status is that I am keen for people to contribute some
testing
>> code (see https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16951)
>>
>> There were also some getGraphicsEvent() changes/fixes suggested by
Richard
>> Bodewits (cc'ed), for which I am also seeking test code.
>>
>> Paul
>>
>> On 13/11/16 09:00, frederik at ofb.net wrote:
>>> Hi Paul,
>>>
>>> Just checking in to see what the status is.
>>>
>>> From my perspective it seems logical to split off X11 into a
separate
>>> package, so development can proceed at a reasonable rate, but I
>>> haven't yet tried to see if that's even possible.
>>>
>>> Thanks,
>>>
>>> Frederick
>>>
>>> On Tue, Jul 26, 2016 at 09:23:35AM +1200, Paul Murrell wrote:
>>>> Hi
>>>>
>>>> Taking a look at those patches is now on my todo list, so I may
be in touch
>>>> with both of you at some point to request some testing.
>>>>
>>>> Paul
>>>>
>>>> On 26/07/16 07:17, frederik at ofb.net wrote:
>>>>> Dear Daniel Greenidge,
>>>>>
>>>>> To enable getGraphicsEvent on Cairo, you have two patches
to choose
>>>>> from:
>>>>>
>>>>> https://bugs.r-project.org/bugzilla/show_bug.cgi?id=14364
>>>>> https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16951
>>>>>
>>>>> The second one is by me, and the first one is from five
years ago by
>>>>> Hugo Mildenberger.
>>>>>
>>>>> Both patches are very simple, they move some lines enabling
>>>>> getGrahpicsEvent outside of a if(!cairo) statement. My
patch also adds
>>>>> the ability to execute code (e.g. for animation) while the
interface
>>>>> is idle.
>>>>>
>>>>> Top guy Duncan Murdoch has expressed that he doesn't
have time to work
>>>>> on applying these patches, and I haven't had any
responses from the
>>>>> rest of the R Core Team. I was thinking that perhaps your
best bet is
>>>>> to try to create a package called e.g.
"X11-fixes" which people can
>>>>> use to get a better X11 library (there is also a bug
waiting to be
>>>>> fixed from 2001:
>>>>> https://bugs.r-project.org/bugzilla/show_bug.cgi?id=16702).
>>>>>
>>>>> I don't know if CRAN would accept such a package, or if
you'd have to
>>>>> distribute it via GitHub, but R has excellent tools to
facilitate the
>>>>> distribution of code via packages. Whether the R kernel
exports enough
>>>>> functions to allow a package to take over event handling,
I'm not
>>>>> sure. I was intending to look more into the details of this
>>>>> possibility but haven't had time.
>>>>>
>>>>> Best wishes,
>>>>>
>>>>> Frederick
>>>>>
>>>>> On Mon, Jul 25, 2016 at 02:15:59PM -0400, Daniel Greenidge
wrote:
>>>>>> Hi all,
>>>>>>
>>>>>> I'm writing an interactive plotting function for
viewing fMRI
>>>>>> datasets. Currently, I get keypresses using
>>>>>> grDevices::getGraphicsEvent().
>>>>>>
>>>>>> Unfortunately getGraphicsEvent() only supports the
X11(type="Xlib")
>>>>>> graphics device on Unix systems. The Xlib device
doesn't support
>>>>>> buffering (i.e. dev.hold() and dev.flush()), so
redrawing the plots
>>>>>> causes lots of flickering.
>>>>>>
>>>>>> Is there a way to get keypresses while using the cairo
graphics
>>>>>> device? Alternatively, is there a way to prevent
flickering with the
>>>>>> Xlib graphics device?
>>>>>>
>>>>>> Best,
>>>>>> Daniel Greenidge
>>>>>>
>>>>>> ______________________________________________
>>>>>> R-devel at r-project.org mailing list
>>>>>> https://stat.ethz.ch/mailman/listinfo/r-devel
>>>>>>
>>>>>
>>>>> ______________________________________________
>>>>> R-devel at r-project.org mailing list
>>>>> https://stat.ethz.ch/mailman/listinfo/r-devel
>>>>>
>>>>
>>>> --
>>>> Dr Paul Murrell
>>>> Department of Statistics
>>>> The University of Auckland
>>>> Private Bag 92019
>>>> Auckland
>>>> New Zealand
>>>> 64 9 3737599 x85392
>>>> paul at stat.auckland.ac.nz
>>>> http://www.stat.auckland.ac.nz/~paul/
>>>>
>>
>> --
>> Dr Paul Murrell
>> Department of Statistics
>> The University of Auckland
>> Private Bag 92019
>> Auckland
>> New Zealand
>> 64 9 3737599 x85392
>> paul at stat.auckland.ac.nz
>> http://www.stat.auckland.ac.nz/~paul/
>>
-- 
Dr Paul Murrell
Department of Statistics
The University of Auckland
Private Bag 92019
Auckland
New Zealand
64 9 3737599 x85392
paul at stat.auckland.ac.nz
http://www.stat.auckland.ac.nz/~paul/