This seems to be happening in my development network but not in production which I guess is good. This happens when running both interactively and via the automatic service run. This is happening on multiple servers. Have already tried to uninstall and reinstall. *Windows Puppet Agent:* 2.7.20 When I run it interactively I can see the problem. I issue the command ''puppet agent --test --noop'' but it also happens with running the regular puppet command. Puppet will hang after it loads facts. It will stay this was until I press enter. (see screenshot 1st.png) It will stay this way forever until I press enter. Upon pressing enter, I receive a message Resolution.exec with a shell built-in is deprecated. (See screenshot 2nd.png) Anyone have any ideas on how to resolve this? -- _____________________________________________________ This email and any files transmitted with it are confidential and intended solely for the addressee. If you received this email in error, please do not disclose the contents to anyone; kindly notify the sender by return email and delete this email and any attachments from your system. © 2011 Currensee Inc. is a member of the National Futures Association (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) trading may involve significant risk of loss. It is not suitable for all investors and you should make sure you understand the risks involved before trading and seek independent advice if necessary. Performance, strategies and charts shown are not necessarily predictive of any particular result and past performance is no indication of future results. Investor returns may vary from Trade Leader returns based on slippage, fees, broker spreads, volatility or other market conditions. Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/TacX5LerBLUJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Facter is executing some command that is trying to read from stdin,
and is hanging. Do you happen to have cygwin or msys installed in
development?
To figure out which fact is causing the problem, I''d add the following
to C:\Program Files (x86)\Puppet
Labs\Puppet\facter\util\resolution.rb, around line 133:
begin
Facter.debug("executing #{code}") # Add this line
out = %x{#{code}}.chomp
Then run: facter --debug --trace
Josh
On Fri, Dec 21, 2012 at 7:42 AM, phundisk <alex.farhadi@currensee.com>
wrote:> This seems to be happening in my development network but not in production
> which I guess is good. This happens when running both interactively and
via
> the automatic service run. This is happening on multiple servers. Have
> already tried to uninstall and reinstall.
>
> Windows Puppet Agent: 2.7.20
>
> When I run it interactively I can see the problem. I issue the command
> ''puppet agent --test --noop'' but it also happens with
running the regular
> puppet command.
> Puppet will hang after it loads facts. It will stay this was until I press
> enter. (see screenshot 1st.png) It will stay this way forever until I
> press enter.
>
> Upon pressing enter, I receive a message Resolution.exec with a shell
> built-in is deprecated. (See screenshot 2nd.png)
>
> Anyone have any ideas on how to resolve this?
>
> _____________________________________________________
> This email and any files transmitted with it are confidential and intended
> solely for the addressee. If you received this email in error, please do
> not disclose the contents to anyone; kindly notify the sender by return
> email and delete this email and any attachments from your system.
>
> © 2011 Currensee Inc. is a member of the National Futures Association (NFA)
> Member ID 0403251 | Over the counter retail foreign currency (Forex)
trading
> may involve significant risk of loss. It is not suitable for all investors
> and you should make sure you understand the risks involved before trading
> and seek independent advice if necessary. Performance, strategies and
charts
> shown are not necessarily predictive of any particular result and past
> performance is no indication of future results. Investor returns may vary
> from Trade Leader returns based on slippage, fees, broker spreads,
> volatility or other market conditions.
>
> Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824
>
> --
> You received this message because you are subscribed to the Google Groups
> "Puppet Users" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/puppet-users/-/TacX5LerBLUJ.
> To post to this group, send email to puppet-users@googlegroups.com.
> To unsubscribe from this group, send email to
> puppet-users+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/puppet-users?hl=en.
--
Josh Cooper
Developer, Puppet Labs
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
Hi Josh! Making the changes and running the command I got the following... (I made the change in C:\Program Files (x86)\Puppet Labs\Puppet\facter\lib\facter\util\ as that was the only resolution.rb I could find) We do not use cygwin or msys on this system. [0;32mFound no suitable resolves of 1 for xendomains [0m [0;32mvalue for xendomains is still nil [0m [0;32mFound no suitable resolves of 1 for selinux [0m [0;32mvalue for selinux is still nil [0m [0;32mFound no suitable resolves of 1 for selinux_mode [0m [0;32mvalue for selinux_mode is still nil [0m [0;32mvalue for netmask_teredo_tunneling_pseudo_interface is still nil [0m [0;32mFound no suitable resolves of 1 for vlans [0m [0;32mvalue for vlans is still nil [0m [0;32mFound no suitable resolves of 1 for selinux [0m [0;32mvalue for selinux is still nil [0m [0;32mFound no suitable resolves of 1 for selinux_config_policy [0m [0;32mvalue for selinux_config_policy is still nil [0m [0;32mFound no suitable resolves of 1 for lsbdistcodename [0m [0;32mvalue for lsbdistcodename is still nil [0m [0;32mFound no suitable resolves of 1 for arp_loopback_pseudo_interface_1 [0m [0;32mvalue for arp_loopback_pseudo_interface_1 is still nil [0m [0;32mvalue for sshrsakey is still nil [0m [0;32mFound no suitable resolves of 1 for selinux [0m [0;32mvalue for selinux is still nil [0m [0;32mFound no suitable resolves of 1 for selinux_config_mode [0m [0;32mvalue for selinux_config_mode is still nil [0m [0;32mFound no suitable resolves of 2 for processor [0m [0;32mvalue for processor is still nil [0m [0;32mexecuting C:\Windows/system32/netsh.exe interface ipv6 show address level=verbose [0m [0;32mFound no suitable resolves of 1 for lsbrelease [0m [0;32mvalue for lsbrelease is still nil [0m [0;32mvalue for macaddress_teredo_tunneling_pseudo_interface is still nil [0m [0;32mvalue for macaddress_local_area_connection is still nil [0m [0;32mvalue for macaddress_loopback_pseudo_interface_1 is still nil [0m [0;32mvalue for sshecdsakey is still nil [0m architecture => x64 dir => C:\Program Files (x86)\Puppet Labs\Puppet\facter domain => local.currensee.com env_windows_installdir => C:\Program Files (x86)\Puppet Labs\Puppet facterversion => 1.6.14 fqdn => mt4-mgr-qaprod.local.currensee.com hardwaremodel => x64 hostname => mt4-mgr-qaprod id => mt4-mgr-qaprod\administrator interfaces => Loopback_Pseudo_Interface_1,Local_Area_Connection,Teredo_Tunneling_Pseudo_Interface ipaddress => 192.168.5.75 ipaddress6 => 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 ipaddress6_teredo_tunneling_pseudo_interface => 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 ipaddress_local_area_connection => 192.168.5.75 ipaddress_loopback_pseudo_interface_1 => 127.0.0.1 kernel => windows kernelmajversion => 6.1 kernelrelease => 6.1.7600 kernelversion => 6.1.7600 macaddress => B8:AC:6F:B6:22:F9 manufacturer => Dell Inc. memoryfree => 1.98 GB memorysize => 3.97 GB memorytotal => 3.97 GB netmask_local_area_connection => 255.255.255.0 netmask_loopback_pseudo_interface_1 => 255.0.0.0 network_local_area_connection => 192.168.5.0 network_loopback_pseudo_interface_1 => 127.0.0.0 operatingsystem => windows operatingsystemrelease => 6.1.7600 osfamily => windows path => C:\Program Files (x86)\Puppet Labs\Puppet\puppet\bin;C:\Program Files (x86)\Puppet Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet Labs\Puppet\bin;C:\Program Files (x86)\Puppet Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet Labs\Puppet\sys\tools\bin;C:\Program Files (x86)\Puppet Labs\Puppet\puppet\bin;C:\Program Files (x86)\Puppet Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet Labs\Puppet\bin;C:\Program Files (x86)\Puppet Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet Labs\Puppet\sys\tools\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program Files\TortoiseSVN\bin;c:\Program Files\SlikSvn\bin physicalprocessorcount => 1 processor0 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz processor1 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz processor2 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz processor3 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz processorcount => 4 productname => Vostro 230 ps => tasklist.exe puppetversion => 2.7.20 rubysitedir => C:/Program Files (x86)/Puppet Labs/Puppet/sys/ruby/lib/ruby/site_ruby/1.8 rubyversion => 1.8.7 serialnumber => 9CH3KM1 timezone => Morocco Standard Time uptime => 3 days uptime_days => 3 uptime_hours => 77 uptime_seconds => 279298 [0;32mexecuting C:\Windows\system32\arp.EXE -a [0m [0;32mNot an EC2 host [0m [0;32mFound no suitable resolves of 1 for selinux [0m [0;32mvalue for selinux is still nil [0m [0;32mFound no suitable resolves of 1 for selinux_current_mode [0m [0;32mvalue for selinux_current_mode is still nil [0m [0;32mexecuting C:\Windows\system32\whoami.EXE [0m [0;32mexecuting uname -p [0m [0;32mvalue for hardwareisa is still nil [0m [0;32mFound no suitable resolves of 1 for lsbmajdistrelease [0m [0;32mvalue for lsbmajdistrelease is still nil [0m [0;32mFound no suitable resolves of 1 for selinux [0m [0;32mvalue for selinux is still nil [0m [0;32mFound no suitable resolves of 3 for swapfree [0m [0;32mvalue for swapfree is still nil [0m [0;32mvalue for network_teredo_tunneling_pseudo_interface is still nil [0m [0;32mFound no suitable resolves of 1 for lsbdistid [0m [0;32mvalue for lsbdistid is still nil [0m [0;32mvalue for ipaddress6_local_area_connection is still nil [0m [0;32mruby-augeas not available [0m [0;32mvalue for augeasversion is still nil [0m [0;32mFound no suitable resolves of 1 for arp [0m [0;32mvalue for arp is still nil [0m [0;32mvalue for ipaddress6_loopback_pseudo_interface_1 is still nil [0m [0;32mvalue for sshdsakey is still nil [0m [0;32mvalue for cfkey is still nil [0m [0;32mFound no suitable resolves of 1 for swapencrypted [0m [0;32mvalue for swapencrypted is still nil [0m [0;32mFound no suitable resolves of 1 for selinux [0m [0;32mvalue for selinux is still nil [0m [0;32mFound no suitable resolves of 1 for selinux_policyversion [0m [0;32mvalue for selinux_policyversion is still nil [0m [0;32mvalue for ipaddress_teredo_tunneling_pseudo_interface is still nil [0m [0;32mexecuting C:\Windows\system32\hostname.EXE [0m [0;32mFound no suitable resolves of 1 for lsbdistrelease [0m [0;32mvalue for lsbdistrelease is still nil [0m [0;32mFound no suitable resolves of 1 for arp_teredo_tunneling_pseudo_interface [0m [0;32mvalue for arp_teredo_tunneling_pseudo_interface is still nil [0m [0;32mexecuting virt-what [0m [0;32mvalue for virtual is still nil [0m [0;32mFound no suitable resolves of 1 for uniqueid [0m [0;32mvalue for uniqueid is still nil [0m [0;32mFound no suitable resolves of 3 for swapsize [0m [0;32mvalue for swapsize is still nil [0m [0;32mvalue for mtu_teredo_tunneling_pseudo_interface is still nil [0m [0;32mFound no suitable resolves of 1 for netmask [0m [0;32mvalue for netmask is still nil [0m [0;32mFound no suitable resolves of 1 for selinux [0m [0;32mvalue for selinux is still nil [0m [0;32mFound no suitable resolves of 1 for selinux_enforced [0m [0;32mvalue for selinux_enforced is still nil [0m [0;32mvalue for mtu_local_area_connection is still nil [0m [0;32mFound no suitable resolves of 1 for lsbdistdescription [0m [0;32mvalue for lsbdistdescription is still nil [0m [0;32mFound no suitable resolves of 1 for is_virtual [0m [0;32mvalue for is_virtual is still nil [0m [0;32mvalue for mtu_loopback_pseudo_interface_1 is still nil [0m [0;32mFound no suitable resolves of 1 for arp_local_area_connection [0m [0;32mvalue for arp_local_area_connection is still nil [0m [0;32mFound no suitable resolves of 2 for iphostnumber [0m [0;32mvalue for iphostnumber is still nil [0m On Friday, December 21, 2012 2:06:22 PM UTC-5, Josh Cooper wrote:> > Facter is executing some command that is trying to read from stdin, > and is hanging. Do you happen to have cygwin or msys installed in > development? > > To figure out which fact is causing the problem, I''d add the following > to C:\Program Files (x86)\Puppet > Labs\Puppet\facter\util\resolution.rb, around line 133: > > begin > Facter.debug("executing #{code}") # Add this line > out = %x{#{code}}.chomp > > Then run: facter --debug --trace > > Josh > > On Fri, Dec 21, 2012 at 7:42 AM, phundisk <alex.f...@currensee.com<javascript:>> > wrote: > > This seems to be happening in my development network but not in > production > > which I guess is good. This happens when running both interactively and > via > > the automatic service run. This is happening on multiple servers. Have > > already tried to uninstall and reinstall. > > > > Windows Puppet Agent: 2.7.20 > > > > When I run it interactively I can see the problem. I issue the command > > ''puppet agent --test --noop'' but it also happens with running the > regular > > puppet command. > > Puppet will hang after it loads facts. It will stay this was until I > press > > enter. (see screenshot 1st.png) It will stay this way forever until I > > press enter. > > > > Upon pressing enter, I receive a message Resolution.exec with a shell > > built-in is deprecated. (See screenshot 2nd.png) > > > > Anyone have any ideas on how to resolve this? > > > > _____________________________________________________ > > This email and any files transmitted with it are confidential and > intended > > solely for the addressee. If you received this email in error, please > do > > not disclose the contents to anyone; kindly notify the sender by return > > email and delete this email and any attachments from your system. > > > > © 2011 Currensee Inc. is a member of the National Futures Association > (NFA) > > Member ID 0403251 | Over the counter retail foreign currency (Forex) > trading > > may involve significant risk of loss. It is not suitable for all > investors > > and you should make sure you understand the risks involved before > trading > > and seek independent advice if necessary. Performance, strategies and > charts > > shown are not necessarily predictive of any particular result and past > > performance is no indication of future results. Investor returns may > vary > > from Trade Leader returns based on slippage, fees, broker spreads, > > volatility or other market conditions. > > > > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | > +1.617.624.3824 > > > > -- > > You received this message because you are subscribed to the Google > Groups > > "Puppet Users" group. > > To view this discussion on the web visit > > https://groups.google.com/d/msg/puppet-users/-/TacX5LerBLUJ. > > To post to this group, send email to puppet...@googlegroups.com<javascript:>. > > > To unsubscribe from this group, send email to > > puppet-users...@googlegroups.com <javascript:>. > > For more options, visit this group at > > http://groups.google.com/group/puppet-users?hl=en. > > > > -- > Josh Cooper > Developer, Puppet Labs >-- _____________________________________________________ This email and any files transmitted with it are confidential and intended solely for the addressee. If you received this email in error, please do not disclose the contents to anyone; kindly notify the sender by return email and delete this email and any attachments from your system. © 2011 Currensee Inc. is a member of the National Futures Association (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) trading may involve significant risk of loss. It is not suitable for all investors and you should make sure you understand the risks involved before trading and seek independent advice if necessary. Performance, strategies and charts shown are not necessarily predictive of any particular result and past performance is no indication of future results. Investor returns may vary from Trade Leader returns based on slippage, fees, broker spreads, volatility or other market conditions. Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/vqLhG8M9lT8J. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Can anyone make sense of the output below? I am still experiencing this error. Does this require any configuration change on the puppet server? On Friday, December 21, 2012 4:45:30 PM UTC-5, phundisk wrote:> > Hi Josh! > > Making the changes and running the command I got the following... (I made > the change in C:\Program Files (x86)\Puppet > Labs\Puppet\facter\lib\facter\util\ as that was the only resolution.rb I > could find) We do not use cygwin or msys on this system. > > [0;32mFound no suitable resolves of 1 for xendomains [0m > [0;32mvalue for xendomains is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux [0m > [0;32mvalue for selinux is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux_mode [0m > [0;32mvalue for selinux_mode is still nil [0m > [0;32mvalue for netmask_teredo_tunneling_pseudo_interface is still nil [0m > [0;32mFound no suitable resolves of 1 for vlans [0m > [0;32mvalue for vlans is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux [0m > [0;32mvalue for selinux is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux_config_policy [0m > [0;32mvalue for selinux_config_policy is still nil [0m > [0;32mFound no suitable resolves of 1 for lsbdistcodename [0m > [0;32mvalue for lsbdistcodename is still nil [0m > [0;32mFound no suitable resolves of 1 for arp_loopback_pseudo_interface_1 > [0m > [0;32mvalue for arp_loopback_pseudo_interface_1 is still nil [0m > [0;32mvalue for sshrsakey is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux [0m > [0;32mvalue for selinux is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux_config_mode [0m > [0;32mvalue for selinux_config_mode is still nil [0m > [0;32mFound no suitable resolves of 2 for processor [0m > [0;32mvalue for processor is still nil [0m > [0;32mexecuting C:\Windows/system32/netsh.exe interface ipv6 show address > level=verbose [0m > [0;32mFound no suitable resolves of 1 for lsbrelease [0m > [0;32mvalue for lsbrelease is still nil [0m > [0;32mvalue for macaddress_teredo_tunneling_pseudo_interface is still nil > [0m > [0;32mvalue for macaddress_local_area_connection is still nil [0m > [0;32mvalue for macaddress_loopback_pseudo_interface_1 is still nil [0m > [0;32mvalue for sshecdsakey is still nil [0m > architecture => x64 > dir => C:\Program Files (x86)\Puppet Labs\Puppet\facter > domain => local.currensee.com > env_windows_installdir => C:\Program Files (x86)\Puppet Labs\Puppet > facterversion => 1.6.14 > fqdn => mt4-mgr-qaprod.local.currensee.com > hardwaremodel => x64 > hostname => mt4-mgr-qaprod > id => mt4-mgr-qaprod\administrator > interfaces => > Loopback_Pseudo_Interface_1,Local_Area_Connection,Teredo_Tunneling_Pseudo_Interface > ipaddress => 192.168.5.75 > ipaddress6 => 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 > ipaddress6_teredo_tunneling_pseudo_interface => > 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 > ipaddress_local_area_connection => 192.168.5.75 > ipaddress_loopback_pseudo_interface_1 => 127.0.0.1 > kernel => windows > kernelmajversion => 6.1 > kernelrelease => 6.1.7600 > kernelversion => 6.1.7600 > macaddress => B8:AC:6F:B6:22:F9 > manufacturer => Dell Inc. > memoryfree => 1.98 GB > memorysize => 3.97 GB > memorytotal => 3.97 GB > netmask_local_area_connection => 255.255.255.0 > netmask_loopback_pseudo_interface_1 => 255.0.0.0 > network_local_area_connection => 192.168.5.0 > network_loopback_pseudo_interface_1 => 127.0.0.0 > operatingsystem => windows > operatingsystemrelease => 6.1.7600 > osfamily => windows > path => C:\Program Files (x86)\Puppet Labs\Puppet\puppet\bin;C:\Program > Files (x86)\Puppet Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet > Labs\Puppet\bin;C:\Program Files (x86)\Puppet > Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet > Labs\Puppet\sys\tools\bin;C:\Program Files (x86)\Puppet > Labs\Puppet\puppet\bin;C:\Program Files (x86)\Puppet > Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet > Labs\Puppet\bin;C:\Program Files (x86)\Puppet > Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet > Labs\Puppet\sys\tools\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program > Files\TortoiseSVN\bin;c:\Program Files\SlikSvn\bin > physicalprocessorcount => 1 > processor0 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz > processor1 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz > processor2 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz > processor3 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz > processorcount => 4 > productname => Vostro 230 > ps => tasklist.exe > puppetversion => 2.7.20 > rubysitedir => C:/Program Files (x86)/Puppet > Labs/Puppet/sys/ruby/lib/ruby/site_ruby/1.8 > rubyversion => 1.8.7 > serialnumber => 9CH3KM1 > timezone => Morocco Standard Time > uptime => 3 days > uptime_days => 3 > uptime_hours => 77 > uptime_seconds => 279298 > [0;32mexecuting C:\Windows\system32\arp.EXE -a [0m > [0;32mNot an EC2 host [0m > [0;32mFound no suitable resolves of 1 for selinux [0m > [0;32mvalue for selinux is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux_current_mode [0m > [0;32mvalue for selinux_current_mode is still nil [0m > [0;32mexecuting C:\Windows\system32\whoami.EXE [0m > [0;32mexecuting uname -p [0m > [0;32mvalue for hardwareisa is still nil [0m > [0;32mFound no suitable resolves of 1 for lsbmajdistrelease [0m > [0;32mvalue for lsbmajdistrelease is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux [0m > [0;32mvalue for selinux is still nil [0m > [0;32mFound no suitable resolves of 3 for swapfree [0m > [0;32mvalue for swapfree is still nil [0m > [0;32mvalue for network_teredo_tunneling_pseudo_interface is still nil [0m > [0;32mFound no suitable resolves of 1 for lsbdistid [0m > [0;32mvalue for lsbdistid is still nil [0m > [0;32mvalue for ipaddress6_local_area_connection is still nil [0m > [0;32mruby-augeas not available [0m > [0;32mvalue for augeasversion is still nil [0m > [0;32mFound no suitable resolves of 1 for arp [0m > [0;32mvalue for arp is still nil [0m > [0;32mvalue for ipaddress6_loopback_pseudo_interface_1 is still nil [0m > [0;32mvalue for sshdsakey is still nil [0m > [0;32mvalue for cfkey is still nil [0m > [0;32mFound no suitable resolves of 1 for swapencrypted [0m > [0;32mvalue for swapencrypted is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux [0m > [0;32mvalue for selinux is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux_policyversion [0m > [0;32mvalue for selinux_policyversion is still nil [0m > [0;32mvalue for ipaddress_teredo_tunneling_pseudo_interface is still nil > [0m > [0;32mexecuting C:\Windows\system32\hostname.EXE [0m > [0;32mFound no suitable resolves of 1 for lsbdistrelease [0m > [0;32mvalue for lsbdistrelease is still nil [0m > [0;32mFound no suitable resolves of 1 for > arp_teredo_tunneling_pseudo_interface [0m > [0;32mvalue for arp_teredo_tunneling_pseudo_interface is still nil [0m > [0;32mexecuting virt-what [0m > [0;32mvalue for virtual is still nil [0m > [0;32mFound no suitable resolves of 1 for uniqueid [0m > [0;32mvalue for uniqueid is still nil [0m > [0;32mFound no suitable resolves of 3 for swapsize [0m > [0;32mvalue for swapsize is still nil [0m > [0;32mvalue for mtu_teredo_tunneling_pseudo_interface is still nil [0m > [0;32mFound no suitable resolves of 1 for netmask [0m > [0;32mvalue for netmask is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux [0m > [0;32mvalue for selinux is still nil [0m > [0;32mFound no suitable resolves of 1 for selinux_enforced [0m > [0;32mvalue for selinux_enforced is still nil [0m > [0;32mvalue for mtu_local_area_connection is still nil [0m > [0;32mFound no suitable resolves of 1 for lsbdistdescription [0m > [0;32mvalue for lsbdistdescription is still nil [0m > [0;32mFound no suitable resolves of 1 for is_virtual [0m > [0;32mvalue for is_virtual is still nil [0m > [0;32mvalue for mtu_loopback_pseudo_interface_1 is still nil [0m > [0;32mFound no suitable resolves of 1 for arp_local_area_connection [0m > [0;32mvalue for arp_local_area_connection is still nil [0m > [0;32mFound no suitable resolves of 2 for iphostnumber [0m > [0;32mvalue for iphostnumber is still nil [0m > > > On Friday, December 21, 2012 2:06:22 PM UTC-5, Josh Cooper wrote: >> >> Facter is executing some command that is trying to read from stdin, >> and is hanging. Do you happen to have cygwin or msys installed in >> development? >> >> To figure out which fact is causing the problem, I''d add the following >> to C:\Program Files (x86)\Puppet >> Labs\Puppet\facter\util\resolution.rb, around line 133: >> >> begin >> Facter.debug("executing #{code}") # Add this line >> out = %x{#{code}}.chomp >> >> Then run: facter --debug --trace >> >> Josh >> >> On Fri, Dec 21, 2012 at 7:42 AM, phundisk <alex.f...@currensee.com> >> wrote: >> > This seems to be happening in my development network but not in >> production >> > which I guess is good. This happens when running both interactively >> and via >> > the automatic service run. This is happening on multiple servers. >> Have >> > already tried to uninstall and reinstall. >> > >> > Windows Puppet Agent: 2.7.20 >> > >> > When I run it interactively I can see the problem. I issue the command >> > ''puppet agent --test --noop'' but it also happens with running the >> regular >> > puppet command. >> > Puppet will hang after it loads facts. It will stay this was until I >> press >> > enter. (see screenshot 1st.png) It will stay this way forever until I >> > press enter. >> > >> > Upon pressing enter, I receive a message Resolution.exec with a shell >> > built-in is deprecated. (See screenshot 2nd.png) >> > >> > Anyone have any ideas on how to resolve this? >> > >> > _____________________________________________________ >> > This email and any files transmitted with it are confidential and >> intended >> > solely for the addressee. If you received this email in error, please >> do >> > not disclose the contents to anyone; kindly notify the sender by return >> > email and delete this email and any attachments from your system. >> > >> > © 2011 Currensee Inc. is a member of the National Futures Association >> (NFA) >> > Member ID 0403251 | Over the counter retail foreign currency (Forex) >> trading >> > may involve significant risk of loss. It is not suitable for all >> investors >> > and you should make sure you understand the risks involved before >> trading >> > and seek independent advice if necessary. Performance, strategies and >> charts >> > shown are not necessarily predictive of any particular result and past >> > performance is no indication of future results. Investor returns may >> vary >> > from Trade Leader returns based on slippage, fees, broker spreads, >> > volatility or other market conditions. >> > >> > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >> +1.617.624.3824 >> > >> > -- >> > You received this message because you are subscribed to the Google >> Groups >> > "Puppet Users" group. >> > To view this discussion on the web visit >> > https://groups.google.com/d/msg/puppet-users/-/TacX5LerBLUJ. >> > To post to this group, send email to puppet...@googlegroups.com. >> > To unsubscribe from this group, send email to >> > puppet-users...@googlegroups.com. >> > For more options, visit this group at >> > http://groups.google.com/group/puppet-users?hl=en. >> >> >> >> -- >> Josh Cooper >> Developer, Puppet Labs >> > > _____________________________________________________ > This email and any files transmitted with it are confidential and intended > solely for the addressee. If you received this email in error, please do > not disclose the contents to anyone; kindly notify the sender by return > email and delete this email and any attachments from your system. > > © 2011 Currensee Inc. is a member of the National Futures Association > (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) > trading may involve significant risk of loss. It is not suitable for all > investors and you should make sure you understand the risks involved before > trading and seek independent advice if necessary. Performance, strategies > and charts shown are not necessarily predictive of any particular result > and past performance is no indication of future results. Investor returns > may vary from Trade Leader returns based on slippage, fees, broker spreads, > volatility or other market conditions. > > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824 >-- _____________________________________________________ This email and any files transmitted with it are confidential and intended solely for the addressee. If you received this email in error, please do not disclose the contents to anyone; kindly notify the sender by return email and delete this email and any attachments from your system. © 2011 Currensee Inc. is a member of the National Futures Association (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) trading may involve significant risk of loss. It is not suitable for all investors and you should make sure you understand the risks involved before trading and seek independent advice if necessary. Performance, strategies and charts shown are not necessarily predictive of any particular result and past performance is no indication of future results. Investor returns may vary from Trade Leader returns based on slippage, fees, broker spreads, volatility or other market conditions. Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/_0w6q25usIsJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
On Friday, January 4, 2013 11:01:00 AM UTC-8, phundisk wrote:> Can anyone make sense of the output below? I am still experiencing this > error. Does this require any configuration change on the puppet server? > > On Friday, December 21, 2012 4:45:30 PM UTC-5, phundisk wrote: >> >> Hi Josh! >> >> Making the changes and running the command I got the following... (I made >> the change in C:\Program Files (x86)\Puppet >> Labs\Puppet\facter\lib\facter\util\ as that was the only resolution.rb I >> could find) We do not use cygwin or msys on this system. >> >> [0;32mFound no suitable resolves of 1 for xendomains [0m >> [0;32mvalue for xendomains is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux [0m >> [0;32mvalue for selinux is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux_mode [0m >> [0;32mvalue for selinux_mode is still nil [0m >> [0;32mvalue for netmask_teredo_tunneling_pseudo_interface is still nil [0m >> [0;32mFound no suitable resolves of 1 for vlans [0m >> [0;32mvalue for vlans is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux [0m >> [0;32mvalue for selinux is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux_config_policy [0m >> [0;32mvalue for selinux_config_policy is still nil [0m >> [0;32mFound no suitable resolves of 1 for lsbdistcodename [0m >> [0;32mvalue for lsbdistcodename is still nil [0m >> [0;32mFound no suitable resolves of 1 for arp_loopback_pseudo_interface_1 >> [0m >> [0;32mvalue for arp_loopback_pseudo_interface_1 is still nil [0m >> [0;32mvalue for sshrsakey is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux [0m >> [0;32mvalue for selinux is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux_config_mode [0m >> [0;32mvalue for selinux_config_mode is still nil [0m >> [0;32mFound no suitable resolves of 2 for processor [0m >> [0;32mvalue for processor is still nil [0m >> [0;32mexecuting C:\Windows/system32/netsh.exe interface ipv6 show address >> level=verbose [0m >> [0;32mFound no suitable resolves of 1 for lsbrelease [0m >> [0;32mvalue for lsbrelease is still nil [0m >> [0;32mvalue for macaddress_teredo_tunneling_pseudo_interface is still nil >> [0m >> [0;32mvalue for macaddress_local_area_connection is still nil [0m >> [0;32mvalue for macaddress_loopback_pseudo_interface_1 is still nil [0m >> [0;32mvalue for sshecdsakey is still nil [0m >> architecture => x64 >> dir => C:\Program Files (x86)\Puppet Labs\Puppet\facter >> domain => local.currensee.com >> env_windows_installdir => C:\Program Files (x86)\Puppet Labs\Puppet >> facterversion => 1.6.14 >> fqdn => mt4-mgr-qaprod.local.currensee.com >> hardwaremodel => x64 >> hostname => mt4-mgr-qaprod >> id => mt4-mgr-qaprod\administrator >> interfaces => >> Loopback_Pseudo_Interface_1,Local_Area_Connection,Teredo_Tunneling_Pseudo_Interface >> ipaddress => 192.168.5.75 >> ipaddress6 => 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >> ipaddress6_teredo_tunneling_pseudo_interface => >> 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >> ipaddress_local_area_connection => 192.168.5.75 >> ipaddress_loopback_pseudo_interface_1 => 127.0.0.1 >> kernel => windows >> kernelmajversion => 6.1 >> kernelrelease => 6.1.7600 >> kernelversion => 6.1.7600 >> macaddress => B8:AC:6F:B6:22:F9 >> manufacturer => Dell Inc. >> memoryfree => 1.98 GB >> memorysize => 3.97 GB >> memorytotal => 3.97 GB >> netmask_local_area_connection => 255.255.255.0 >> netmask_loopback_pseudo_interface_1 => 255.0.0.0 >> network_local_area_connection => 192.168.5.0 >> network_loopback_pseudo_interface_1 => 127.0.0.0 >> operatingsystem => windows >> operatingsystemrelease => 6.1.7600 >> osfamily => windows >> path => C:\Program Files (x86)\Puppet Labs\Puppet\puppet\bin;C:\Program >> Files (x86)\Puppet Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet >> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >> Labs\Puppet\sys\tools\bin;C:\Program Files (x86)\Puppet >> Labs\Puppet\puppet\bin;C:\Program Files (x86)\Puppet >> Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet >> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >> Labs\Puppet\sys\tools\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program >> Files\TortoiseSVN\bin;c:\Program Files\SlikSvn\bin >> physicalprocessorcount => 1 >> processor0 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >> processor1 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >> processor2 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >> processor3 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >> processorcount => 4 >> productname => Vostro 230 >> ps => tasklist.exe >> puppetversion => 2.7.20 >> rubysitedir => C:/Program Files (x86)/Puppet >> Labs/Puppet/sys/ruby/lib/ruby/site_ruby/1.8 >> rubyversion => 1.8.7 >> serialnumber => 9CH3KM1 >> timezone => Morocco Standard Time >> uptime => 3 days >> uptime_days => 3 >> uptime_hours => 77 >> uptime_seconds => 279298 >> [0;32mexecuting C:\Windows\system32\arp.EXE -a [0m >> [0;32mNot an EC2 host [0m >> [0;32mFound no suitable resolves of 1 for selinux [0m >> [0;32mvalue for selinux is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux_current_mode [0m >> [0;32mvalue for selinux_current_mode is still nil [0m >> [0;32mexecuting C:\Windows\system32\whoami.EXE [0m >> [0;32mexecuting uname -p [0m >> [0;32mvalue for hardwareisa is still nil [0m >> [0;32mFound no suitable resolves of 1 for lsbmajdistrelease [0m >> [0;32mvalue for lsbmajdistrelease is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux [0m >> [0;32mvalue for selinux is still nil [0m >> [0;32mFound no suitable resolves of 3 for swapfree [0m >> [0;32mvalue for swapfree is still nil [0m >> [0;32mvalue for network_teredo_tunneling_pseudo_interface is still nil [0m >> [0;32mFound no suitable resolves of 1 for lsbdistid [0m >> [0;32mvalue for lsbdistid is still nil [0m >> [0;32mvalue for ipaddress6_local_area_connection is still nil [0m >> [0;32mruby-augeas not available [0m >> [0;32mvalue for augeasversion is still nil [0m >> [0;32mFound no suitable resolves of 1 for arp [0m >> [0;32mvalue for arp is still nil [0m >> [0;32mvalue for ipaddress6_loopback_pseudo_interface_1 is still nil [0m >> [0;32mvalue for sshdsakey is still nil [0m >> [0;32mvalue for cfkey is still nil [0m >> [0;32mFound no suitable resolves of 1 for swapencrypted [0m >> [0;32mvalue for swapencrypted is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux [0m >> [0;32mvalue for selinux is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux_policyversion [0m >> [0;32mvalue for selinux_policyversion is still nil [0m >> [0;32mvalue for ipaddress_teredo_tunneling_pseudo_interface is still nil >> [0m >> [0;32mexecuting C:\Windows\system32\hostname.EXE [0m >> [0;32mFound no suitable resolves of 1 for lsbdistrelease [0m >> [0;32mvalue for lsbdistrelease is still nil [0m >> [0;32mFound no suitable resolves of 1 for >> arp_teredo_tunneling_pseudo_interface [0m >> [0;32mvalue for arp_teredo_tunneling_pseudo_interface is still nil [0m >> [0;32mexecuting virt-what [0m >> [0;32mvalue for virtual is still nil [0m >> [0;32mFound no suitable resolves of 1 for uniqueid [0m >> [0;32mvalue for uniqueid is still nil [0m >> [0;32mFound no suitable resolves of 3 for swapsize [0m >> [0;32mvalue for swapsize is still nil [0m >> [0;32mvalue for mtu_teredo_tunneling_pseudo_interface is still nil [0m >> [0;32mFound no suitable resolves of 1 for netmask [0m >> [0;32mvalue for netmask is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux [0m >> [0;32mvalue for selinux is still nil [0m >> [0;32mFound no suitable resolves of 1 for selinux_enforced [0m >> [0;32mvalue for selinux_enforced is still nil [0m >> [0;32mvalue for mtu_local_area_connection is still nil [0m >> [0;32mFound no suitable resolves of 1 for lsbdistdescription [0m >> [0;32mvalue for lsbdistdescription is still nil [0m >> [0;32mFound no suitable resolves of 1 for is_virtual [0m >> [0;32mvalue for is_virtual is still nil [0m >> [0;32mvalue for mtu_loopback_pseudo_interface_1 is still nil [0m >> [0;32mFound no suitable resolves of 1 for arp_local_area_connection [0m >> [0;32mvalue for arp_local_area_connection is still nil [0m >> [0;32mFound no suitable resolves of 2 for iphostnumber [0m >> [0;32mvalue for iphostnumber is still nil [0m >> >> >> On Friday, December 21, 2012 2:06:22 PM UTC-5, Josh Cooper wrote: >>> >>> Facter is executing some command that is trying to read from stdin, >>> and is hanging. Do you happen to have cygwin or msys installed in >>> development? >>> >>> To figure out which fact is causing the problem, I''d add the following >>> to C:\Program Files (x86)\Puppet >>> Labs\Puppet\facter\util\resolution.rb, around line 133: >>> >>> begin >>> Facter.debug("executing #{code}") # Add this line >>> out = %x{#{code}}.chomp >>> >>> Then run: facter --debug --trace >>> >>> Josh >>> >>> On Fri, Dec 21, 2012 at 7:42 AM, phundisk <alex.f...@currensee.com> >>> wrote: >>> > This seems to be happening in my development network but not in >>> production >>> > which I guess is good. This happens when running both interactively >>> and via >>> > the automatic service run. This is happening on multiple servers. >>> Have >>> > already tried to uninstall and reinstall. >>> > >>> > Windows Puppet Agent: 2.7.20 >>> > >>> > When I run it interactively I can see the problem. I issue the >>> command >>> > ''puppet agent --test --noop'' but it also happens with running the >>> regular >>> > puppet command. >>> > Puppet will hang after it loads facts. It will stay this was until I >>> press >>> > enter. (see screenshot 1st.png) It will stay this way forever until >>> I >>> > press enter. >>> > >>> > Upon pressing enter, I receive a message Resolution.exec with a shell >>> > built-in is deprecated. (See screenshot 2nd.png) >>> > >>> > Anyone have any ideas on how to resolve this? >>> > >>> > _____________________________________________________ >>> > This email and any files transmitted with it are confidential and >>> intended >>> > solely for the addressee. If you received this email in error, please >>> do >>> > not disclose the contents to anyone; kindly notify the sender by >>> return >>> > email and delete this email and any attachments from your system. >>> > >>> > © 2011 Currensee Inc. is a member of the National Futures Association >>> (NFA) >>> > Member ID 0403251 | Over the counter retail foreign currency (Forex) >>> trading >>> > may involve significant risk of loss. It is not suitable for all >>> investors >>> > and you should make sure you understand the risks involved before >>> trading >>> > and seek independent advice if necessary. Performance, strategies and >>> charts >>> > shown are not necessarily predictive of any particular result and past >>> > performance is no indication of future results. Investor returns may >>> vary >>> > from Trade Leader returns based on slippage, fees, broker spreads, >>> > volatility or other market conditions. >>> > >>> > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>> +1.617.624.3824 >>> > >>> > -- >>> > You received this message because you are subscribed to the Google >>> Groups >>> > "Puppet Users" group. >>> > To view this discussion on the web visit >>> > https://groups.google.com/d/msg/puppet-users/-/TacX5LerBLUJ. >>> > To post to this group, send email to puppet...@googlegroups.com. >>> > To unsubscribe from this group, send email to >>> > puppet-users...@googlegroups.com. >>> > For more options, visit this group at >>> > http://groups.google.com/group/puppet-users?hl=en. >>> >>> >>> >>> -- >>> Josh Cooper >>> Developer, Puppet Labs >>> >> >> _____________________________________________________ >> This email and any files transmitted with it are confidential and >> intended solely for the addressee. If you received this email in error, >> please do not disclose the contents to anyone; kindly notify the sender by >> return email and delete this email and any attachments from your system. >> >> © 2011 Currensee Inc. is a member of the National Futures Association >> (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) >> trading may involve significant risk of loss. It is not suitable for all >> investors and you should make sure you understand the risks involved before >> trading and seek independent advice if necessary. Performance, strategies >> and charts shown are not necessarily predictive of any particular result >> and past performance is no indication of future results. Investor returns >> may vary from Trade Leader returns based on slippage, fees, broker spreads, >> volatility or other market conditions. >> >> Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824 >> >Can you try removing ''c:\Program Files\TortoiseSVN\bin;c:\Program Files\SlikSvn\bin'' from your PATH Josh -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/XvfsLV8Or6cJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
I removed these from my path and restarted. When running puppet it still seems to hang. I tried to comment out the section in root_home.rb that facter seems to be hanging on but the file was overwritten when attempting to run puppet again. Is there an update to this file or facter itself? Currently the package installed is https://downloads.puppetlabs.com/windows/puppet-2.7.20.msi On Friday, January 4, 2013 6:57:58 PM UTC-5, Josh Cooper wrote:> > On Friday, January 4, 2013 11:01:00 AM UTC-8, phundisk wrote: > >> Can anyone make sense of the output below? I am still experiencing this >> error. Does this require any configuration change on the puppet server? >> >> On Friday, December 21, 2012 4:45:30 PM UTC-5, phundisk wrote: >>> >>> Hi Josh! >>> >>> Making the changes and running the command I got the following... (I >>> made the change in C:\Program Files (x86)\Puppet >>> Labs\Puppet\facter\lib\facter\util\ as that was the only resolution.rb I >>> could find) We do not use cygwin or msys on this system. >>> >>> [0;32mFound no suitable resolves of 1 for xendomains [0m >>> [0;32mvalue for xendomains is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> [0;32mvalue for selinux is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux_mode [0m >>> [0;32mvalue for selinux_mode is still nil [0m >>> [0;32mvalue for netmask_teredo_tunneling_pseudo_interface is still nil >>> [0m >>> [0;32mFound no suitable resolves of 1 for vlans [0m >>> [0;32mvalue for vlans is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> [0;32mvalue for selinux is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux_config_policy [0m >>> [0;32mvalue for selinux_config_policy is still nil [0m >>> [0;32mFound no suitable resolves of 1 for lsbdistcodename [0m >>> [0;32mvalue for lsbdistcodename is still nil [0m >>> [0;32mFound no suitable resolves of 1 for >>> arp_loopback_pseudo_interface_1 [0m >>> [0;32mvalue for arp_loopback_pseudo_interface_1 is still nil [0m >>> [0;32mvalue for sshrsakey is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> [0;32mvalue for selinux is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux_config_mode [0m >>> [0;32mvalue for selinux_config_mode is still nil [0m >>> [0;32mFound no suitable resolves of 2 for processor [0m >>> [0;32mvalue for processor is still nil [0m >>> [0;32mexecuting C:\Windows/system32/netsh.exe interface ipv6 show >>> address level=verbose [0m >>> [0;32mFound no suitable resolves of 1 for lsbrelease [0m >>> [0;32mvalue for lsbrelease is still nil [0m >>> [0;32mvalue for macaddress_teredo_tunneling_pseudo_interface is still >>> nil [0m >>> [0;32mvalue for macaddress_local_area_connection is still nil [0m >>> [0;32mvalue for macaddress_loopback_pseudo_interface_1 is still nil [0m >>> [0;32mvalue for sshecdsakey is still nil [0m >>> architecture => x64 >>> dir => C:\Program Files (x86)\Puppet Labs\Puppet\facter >>> domain => local.currensee.com >>> env_windows_installdir => C:\Program Files (x86)\Puppet Labs\Puppet >>> facterversion => 1.6.14 >>> fqdn => mt4-mgr-qaprod.local.currensee.com >>> hardwaremodel => x64 >>> hostname => mt4-mgr-qaprod >>> id => mt4-mgr-qaprod\administrator >>> interfaces => >>> Loopback_Pseudo_Interface_1,Local_Area_Connection,Teredo_Tunneling_Pseudo_Interface >>> ipaddress => 192.168.5.75 >>> ipaddress6 => 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >>> ipaddress6_teredo_tunneling_pseudo_interface => >>> 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >>> ipaddress_local_area_connection => 192.168.5.75 >>> ipaddress_loopback_pseudo_interface_1 => 127.0.0.1 >>> kernel => windows >>> kernelmajversion => 6.1 >>> kernelrelease => 6.1.7600 >>> kernelversion => 6.1.7600 >>> macaddress => B8:AC:6F:B6:22:F9 >>> manufacturer => Dell Inc. >>> memoryfree => 1.98 GB >>> memorysize => 3.97 GB >>> memorytotal => 3.97 GB >>> netmask_local_area_connection => 255.255.255.0 >>> netmask_loopback_pseudo_interface_1 => 255.0.0.0 >>> network_local_area_connection => 192.168.5.0 >>> network_loopback_pseudo_interface_1 => 127.0.0.0 >>> operatingsystem => windows >>> operatingsystemrelease => 6.1.7600 >>> osfamily => windows >>> path => C:\Program Files (x86)\Puppet Labs\Puppet\puppet\bin;C:\Program >>> Files (x86)\Puppet Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet >>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >>> Labs\Puppet\sys\tools\bin;C:\Program Files (x86)\Puppet >>> Labs\Puppet\puppet\bin;C:\Program Files (x86)\Puppet >>> Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet >>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >>> Labs\Puppet\sys\tools\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program >>> Files\TortoiseSVN\bin;c:\Program Files\SlikSvn\bin >>> physicalprocessorcount => 1 >>> processor0 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>> processor1 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>> processor2 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>> processor3 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>> processorcount => 4 >>> productname => Vostro 230 >>> ps => tasklist.exe >>> puppetversion => 2.7.20 >>> rubysitedir => C:/Program Files (x86)/Puppet >>> Labs/Puppet/sys/ruby/lib/ruby/site_ruby/1.8 >>> rubyversion => 1.8.7 >>> serialnumber => 9CH3KM1 >>> timezone => Morocco Standard Time >>> uptime => 3 days >>> uptime_days => 3 >>> uptime_hours => 77 >>> uptime_seconds => 279298 >>> [0;32mexecuting C:\Windows\system32\arp.EXE -a [0m >>> [0;32mNot an EC2 host [0m >>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> [0;32mvalue for selinux is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux_current_mode [0m >>> [0;32mvalue for selinux_current_mode is still nil [0m >>> [0;32mexecuting C:\Windows\system32\whoami.EXE [0m >>> [0;32mexecuting uname -p [0m >>> [0;32mvalue for hardwareisa is still nil [0m >>> [0;32mFound no suitable resolves of 1 for lsbmajdistrelease [0m >>> [0;32mvalue for lsbmajdistrelease is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> [0;32mvalue for selinux is still nil [0m >>> [0;32mFound no suitable resolves of 3 for swapfree [0m >>> [0;32mvalue for swapfree is still nil [0m >>> [0;32mvalue for network_teredo_tunneling_pseudo_interface is still nil >>> [0m >>> [0;32mFound no suitable resolves of 1 for lsbdistid [0m >>> [0;32mvalue for lsbdistid is still nil [0m >>> [0;32mvalue for ipaddress6_local_area_connection is still nil [0m >>> [0;32mruby-augeas not available [0m >>> [0;32mvalue for augeasversion is still nil [0m >>> [0;32mFound no suitable resolves of 1 for arp [0m >>> [0;32mvalue for arp is still nil [0m >>> [0;32mvalue for ipaddress6_loopback_pseudo_interface_1 is still nil [0m >>> [0;32mvalue for sshdsakey is still nil [0m >>> [0;32mvalue for cfkey is still nil [0m >>> [0;32mFound no suitable resolves of 1 for swapencrypted [0m >>> [0;32mvalue for swapencrypted is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> [0;32mvalue for selinux is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux_policyversion [0m >>> [0;32mvalue for selinux_policyversion is still nil [0m >>> [0;32mvalue for ipaddress_teredo_tunneling_pseudo_interface is still nil >>> [0m >>> [0;32mexecuting C:\Windows\system32\hostname.EXE [0m >>> [0;32mFound no suitable resolves of 1 for lsbdistrelease [0m >>> [0;32mvalue for lsbdistrelease is still nil [0m >>> [0;32mFound no suitable resolves of 1 for >>> arp_teredo_tunneling_pseudo_interface [0m >>> [0;32mvalue for arp_teredo_tunneling_pseudo_interface is still nil [0m >>> [0;32mexecuting virt-what [0m >>> [0;32mvalue for virtual is still nil [0m >>> [0;32mFound no suitable resolves of 1 for uniqueid [0m >>> [0;32mvalue for uniqueid is still nil [0m >>> [0;32mFound no suitable resolves of 3 for swapsize [0m >>> [0;32mvalue for swapsize is still nil [0m >>> [0;32mvalue for mtu_teredo_tunneling_pseudo_interface is still nil [0m >>> [0;32mFound no suitable resolves of 1 for netmask [0m >>> [0;32mvalue for netmask is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> [0;32mvalue for selinux is still nil [0m >>> [0;32mFound no suitable resolves of 1 for selinux_enforced [0m >>> [0;32mvalue for selinux_enforced is still nil [0m >>> [0;32mvalue for mtu_local_area_connection is still nil [0m >>> [0;32mFound no suitable resolves of 1 for lsbdistdescription [0m >>> [0;32mvalue for lsbdistdescription is still nil [0m >>> [0;32mFound no suitable resolves of 1 for is_virtual [0m >>> [0;32mvalue for is_virtual is still nil [0m >>> [0;32mvalue for mtu_loopback_pseudo_interface_1 is still nil [0m >>> [0;32mFound no suitable resolves of 1 for arp_local_area_connection [0m >>> [0;32mvalue for arp_local_area_connection is still nil [0m >>> [0;32mFound no suitable resolves of 2 for iphostnumber [0m >>> [0;32mvalue for iphostnumber is still nil [0m >>> >>> >>> On Friday, December 21, 2012 2:06:22 PM UTC-5, Josh Cooper wrote: >>>> >>>> Facter is executing some command that is trying to read from stdin, >>>> and is hanging. Do you happen to have cygwin or msys installed in >>>> development? >>>> >>>> To figure out which fact is causing the problem, I''d add the following >>>> to C:\Program Files (x86)\Puppet >>>> Labs\Puppet\facter\util\resolution.rb, around line 133: >>>> >>>> begin >>>> Facter.debug("executing #{code}") # Add this line >>>> out = %x{#{code}}.chomp >>>> >>>> Then run: facter --debug --trace >>>> >>>> Josh >>>> >>>> On Fri, Dec 21, 2012 at 7:42 AM, phundisk <alex.f...@currensee.com> >>>> wrote: >>>> > This seems to be happening in my development network but not in >>>> production >>>> > which I guess is good. This happens when running both interactively >>>> and via >>>> > the automatic service run. This is happening on multiple servers. >>>> Have >>>> > already tried to uninstall and reinstall. >>>> > >>>> > Windows Puppet Agent: 2.7.20 >>>> > >>>> > When I run it interactively I can see the problem. I issue the >>>> command >>>> > ''puppet agent --test --noop'' but it also happens with running the >>>> regular >>>> > puppet command. >>>> > Puppet will hang after it loads facts. It will stay this was until I >>>> press >>>> > enter. (see screenshot 1st.png) It will stay this way forever until >>>> I >>>> > press enter. >>>> > >>>> > Upon pressing enter, I receive a message Resolution.exec with a shell >>>> > built-in is deprecated. (See screenshot 2nd.png) >>>> > >>>> > Anyone have any ideas on how to resolve this? >>>> > >>>> > _____________________________________________________ >>>> > This email and any files transmitted with it are confidential and >>>> intended >>>> > solely for the addressee. If you received this email in error, >>>> please do >>>> > not disclose the contents to anyone; kindly notify the sender by >>>> return >>>> > email and delete this email and any attachments from your system. >>>> > >>>> > © 2011 Currensee Inc. is a member of the National Futures Association >>>> (NFA) >>>> > Member ID 0403251 | Over the counter retail foreign currency (Forex) >>>> trading >>>> > may involve significant risk of loss. It is not suitable for all >>>> investors >>>> > and you should make sure you understand the risks involved before >>>> trading >>>> > and seek independent advice if necessary. Performance, strategies and >>>> charts >>>> > shown are not necessarily predictive of any particular result and >>>> past >>>> > performance is no indication of future results. Investor returns may >>>> vary >>>> > from Trade Leader returns based on slippage, fees, broker spreads, >>>> > volatility or other market conditions. >>>> > >>>> > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>>> +1.617.624.3824 >>>> > >>>> > -- >>>> > You received this message because you are subscribed to the Google >>>> Groups >>>> > "Puppet Users" group. >>>> > To view this discussion on the web visit >>>> > https://groups.google.com/d/msg/puppet-users/-/TacX5LerBLUJ. >>>> > To post to this group, send email to puppet...@googlegroups.com. >>>> > To unsubscribe from this group, send email to >>>> > puppet-users...@googlegroups.com. >>>> > For more options, visit this group at >>>> > http://groups.google.com/group/puppet-users?hl=en. >>>> >>>> >>>> >>>> -- >>>> Josh Cooper >>>> Developer, Puppet Labs >>>> >>> >>> _____________________________________________________ >>> This email and any files transmitted with it are confidential and >>> intended solely for the addressee. If you received this email in error, >>> please do not disclose the contents to anyone; kindly notify the sender by >>> return email and delete this email and any attachments from your system. >>> >>> © 2011 Currensee Inc. is a member of the National Futures Association >>> (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) >>> trading may involve significant risk of loss. It is not suitable for all >>> investors and you should make sure you understand the risks involved before >>> trading and seek independent advice if necessary. Performance, strategies >>> and charts shown are not necessarily predictive of any particular result >>> and past performance is no indication of future results. Investor returns >>> may vary from Trade Leader returns based on slippage, fees, broker spreads, >>> volatility or other market conditions. >>> >>> Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>> +1.617.624.3824 >>> >> > > Can you try removing ''c:\Program Files\TortoiseSVN\bin;c:\Program > Files\SlikSvn\bin'' from your PATH > > Josh >-- _____________________________________________________ This email and any files transmitted with it are confidential and intended solely for the addressee. If you received this email in error, please do not disclose the contents to anyone; kindly notify the sender by return email and delete this email and any attachments from your system. © 2011 Currensee Inc. is a member of the National Futures Association (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) trading may involve significant risk of loss. It is not suitable for all investors and you should make sure you understand the risks involved before trading and seek independent advice if necessary. Performance, strategies and charts shown are not necessarily predictive of any particular result and past performance is no indication of future results. Investor returns may vary from Trade Leader returns based on slippage, fees, broker spreads, volatility or other market conditions. Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/piHpC7JLxLgJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Hi Alex, On Mon, Jan 7, 2013 at 7:56 AM, phundisk <alex.farhadi@currensee.com> wrote:> I removed these from my path and restarted. When running puppet it still > seems to hang. I tried to comment out the section in root_home.rb that > facter seems to be hanging on but the file was overwritten when attempting > to run puppet again.Ah, the root_home fact is part of the puppetlabs stdlib module. When you run facter, only facts that are part of facter itself are evaluated. But, when you run puppet, it runs facter, but tells it load facts from additional directories, e.g. from modules'' facter directories. The stdlib module is updated each time the agent does a pluginsync, which is why your edits are getting overwritten.> Is there an update to this file or facter itself?The root_home fact calls `getent passwd root`, can you try executing that from the command line? Also, on the master, you might try editing the fact root_home.rb in the stdlib module, e.g. /etc/puppet/modules/stdlib/lib/facter/root_home.rb. Either to skip the exec on windows: require ''facter/util/config'' unless Facter::Util::Config.is_windows? root_ent = Facter::Util::Resolution.exec("getent passwd root") ... end Or add another fact for root_home confined to windows: Facter.add("root_home") do confine :kernel => :windows setcode do "#{ENV[''SYSTEMDRIVE'']}/Users/Administrator" end end> Currently the package installed is > https://downloads.puppetlabs.com/windows/puppet-2.7.20.msi > > > On Friday, January 4, 2013 6:57:58 PM UTC-5, Josh Cooper wrote: >> >> On Friday, January 4, 2013 11:01:00 AM UTC-8, phundisk wrote: >>> >>> Can anyone make sense of the output below? I am still experiencing this >>> error. Does this require any configuration change on the puppet server? >>> >>> On Friday, December 21, 2012 4:45:30 PM UTC-5, phundisk wrote: >>>> >>>> Hi Josh! >>>> >>>> Making the changes and running the command I got the following... (I >>>> made the change in C:\Program Files (x86)\Puppet >>>> Labs\Puppet\facter\lib\facter\util\ as that was the only resolution.rb I >>>> could find) We do not use cygwin or msys on this system. >>>> >>>> [0;32mFound no suitable resolves of 1 for xendomains [0m >>>> [0;32mvalue for xendomains is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> [0;32mvalue for selinux is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux_mode [0m >>>> [0;32mvalue for selinux_mode is still nil [0m >>>> [0;32mvalue for netmask_teredo_tunneling_pseudo_interface is still nil >>>> [0m >>>> [0;32mFound no suitable resolves of 1 for vlans [0m >>>> [0;32mvalue for vlans is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> [0;32mvalue for selinux is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux_config_policy [0m >>>> [0;32mvalue for selinux_config_policy is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for lsbdistcodename [0m >>>> [0;32mvalue for lsbdistcodename is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for >>>> arp_loopback_pseudo_interface_1 [0m >>>> [0;32mvalue for arp_loopback_pseudo_interface_1 is still nil [0m >>>> [0;32mvalue for sshrsakey is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> [0;32mvalue for selinux is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux_config_mode [0m >>>> [0;32mvalue for selinux_config_mode is still nil [0m >>>> [0;32mFound no suitable resolves of 2 for processor [0m >>>> [0;32mvalue for processor is still nil [0m >>>> [0;32mexecuting C:\Windows/system32/netsh.exe interface ipv6 show >>>> address level=verbose [0m >>>> [0;32mFound no suitable resolves of 1 for lsbrelease [0m >>>> [0;32mvalue for lsbrelease is still nil [0m >>>> [0;32mvalue for macaddress_teredo_tunneling_pseudo_interface is still >>>> nil [0m >>>> [0;32mvalue for macaddress_local_area_connection is still nil [0m >>>> [0;32mvalue for macaddress_loopback_pseudo_interface_1 is still nil [0m >>>> [0;32mvalue for sshecdsakey is still nil [0m >>>> architecture => x64 >>>> dir => C:\Program Files (x86)\Puppet Labs\Puppet\facter >>>> domain => local.currensee.com >>>> env_windows_installdir => C:\Program Files (x86)\Puppet Labs\Puppet >>>> facterversion => 1.6.14 >>>> fqdn => mt4-mgr-qaprod.local.currensee.com >>>> hardwaremodel => x64 >>>> hostname => mt4-mgr-qaprod >>>> id => mt4-mgr-qaprod\administrator >>>> interfaces => >>>> Loopback_Pseudo_Interface_1,Local_Area_Connection,Teredo_Tunneling_Pseudo_Interface >>>> ipaddress => 192.168.5.75 >>>> ipaddress6 => 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >>>> ipaddress6_teredo_tunneling_pseudo_interface => >>>> 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >>>> ipaddress_local_area_connection => 192.168.5.75 >>>> ipaddress_loopback_pseudo_interface_1 => 127.0.0.1 >>>> kernel => windows >>>> kernelmajversion => 6.1 >>>> kernelrelease => 6.1.7600 >>>> kernelversion => 6.1.7600 >>>> macaddress => B8:AC:6F:B6:22:F9 >>>> manufacturer => Dell Inc. >>>> memoryfree => 1.98 GB >>>> memorysize => 3.97 GB >>>> memorytotal => 3.97 GB >>>> netmask_local_area_connection => 255.255.255.0 >>>> netmask_loopback_pseudo_interface_1 => 255.0.0.0 >>>> network_local_area_connection => 192.168.5.0 >>>> network_loopback_pseudo_interface_1 => 127.0.0.0 >>>> operatingsystem => windows >>>> operatingsystemrelease => 6.1.7600 >>>> osfamily => windows >>>> path => C:\Program Files (x86)\Puppet Labs\Puppet\puppet\bin;C:\Program >>>> Files (x86)\Puppet Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet >>>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >>>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >>>> Labs\Puppet\sys\tools\bin;C:\Program Files (x86)\Puppet >>>> Labs\Puppet\puppet\bin;C:\Program Files (x86)\Puppet >>>> Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet >>>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >>>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >>>> Labs\Puppet\sys\tools\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program >>>> Files\TortoiseSVN\bin;c:\Program Files\SlikSvn\bin >>>> physicalprocessorcount => 1 >>>> processor0 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>>> processor1 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>>> processor2 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>>> processor3 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>>> processorcount => 4 >>>> productname => Vostro 230 >>>> ps => tasklist.exe >>>> puppetversion => 2.7.20 >>>> rubysitedir => C:/Program Files (x86)/Puppet >>>> Labs/Puppet/sys/ruby/lib/ruby/site_ruby/1.8 >>>> rubyversion => 1.8.7 >>>> serialnumber => 9CH3KM1 >>>> timezone => Morocco Standard Time >>>> uptime => 3 days >>>> uptime_days => 3 >>>> uptime_hours => 77 >>>> uptime_seconds => 279298 >>>> [0;32mexecuting C:\Windows\system32\arp.EXE -a [0m >>>> [0;32mNot an EC2 host [0m >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> [0;32mvalue for selinux is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux_current_mode [0m >>>> [0;32mvalue for selinux_current_mode is still nil [0m >>>> [0;32mexecuting C:\Windows\system32\whoami.EXE [0m >>>> [0;32mexecuting uname -p [0m >>>> [0;32mvalue for hardwareisa is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for lsbmajdistrelease [0m >>>> [0;32mvalue for lsbmajdistrelease is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> [0;32mvalue for selinux is still nil [0m >>>> [0;32mFound no suitable resolves of 3 for swapfree [0m >>>> [0;32mvalue for swapfree is still nil [0m >>>> [0;32mvalue for network_teredo_tunneling_pseudo_interface is still nil >>>> [0m >>>> [0;32mFound no suitable resolves of 1 for lsbdistid [0m >>>> [0;32mvalue for lsbdistid is still nil [0m >>>> [0;32mvalue for ipaddress6_local_area_connection is still nil [0m >>>> [0;32mruby-augeas not available [0m >>>> [0;32mvalue for augeasversion is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for arp [0m >>>> [0;32mvalue for arp is still nil [0m >>>> [0;32mvalue for ipaddress6_loopback_pseudo_interface_1 is still nil [0m >>>> [0;32mvalue for sshdsakey is still nil [0m >>>> [0;32mvalue for cfkey is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for swapencrypted [0m >>>> [0;32mvalue for swapencrypted is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> [0;32mvalue for selinux is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux_policyversion [0m >>>> [0;32mvalue for selinux_policyversion is still nil [0m >>>> [0;32mvalue for ipaddress_teredo_tunneling_pseudo_interface is still nil >>>> [0m >>>> [0;32mexecuting C:\Windows\system32\hostname.EXE [0m >>>> [0;32mFound no suitable resolves of 1 for lsbdistrelease [0m >>>> [0;32mvalue for lsbdistrelease is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for >>>> arp_teredo_tunneling_pseudo_interface [0m >>>> [0;32mvalue for arp_teredo_tunneling_pseudo_interface is still nil [0m >>>> [0;32mexecuting virt-what [0m >>>> [0;32mvalue for virtual is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for uniqueid [0m >>>> [0;32mvalue for uniqueid is still nil [0m >>>> [0;32mFound no suitable resolves of 3 for swapsize [0m >>>> [0;32mvalue for swapsize is still nil [0m >>>> [0;32mvalue for mtu_teredo_tunneling_pseudo_interface is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for netmask [0m >>>> [0;32mvalue for netmask is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> [0;32mvalue for selinux is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for selinux_enforced [0m >>>> [0;32mvalue for selinux_enforced is still nil [0m >>>> [0;32mvalue for mtu_local_area_connection is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for lsbdistdescription [0m >>>> [0;32mvalue for lsbdistdescription is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for is_virtual [0m >>>> [0;32mvalue for is_virtual is still nil [0m >>>> [0;32mvalue for mtu_loopback_pseudo_interface_1 is still nil [0m >>>> [0;32mFound no suitable resolves of 1 for arp_local_area_connection [0m >>>> [0;32mvalue for arp_local_area_connection is still nil [0m >>>> [0;32mFound no suitable resolves of 2 for iphostnumber [0m >>>> [0;32mvalue for iphostnumber is still nil [0m >>>> >>>> >>>> On Friday, December 21, 2012 2:06:22 PM UTC-5, Josh Cooper wrote: >>>>> >>>>> Facter is executing some command that is trying to read from stdin, >>>>> and is hanging. Do you happen to have cygwin or msys installed in >>>>> development? >>>>> >>>>> To figure out which fact is causing the problem, I''d add the following >>>>> to C:\Program Files (x86)\Puppet >>>>> Labs\Puppet\facter\util\resolution.rb, around line 133: >>>>> >>>>> begin >>>>> Facter.debug("executing #{code}") # Add this line >>>>> out = %x{#{code}}.chomp >>>>> >>>>> Then run: facter --debug --trace >>>>> >>>>> Josh >>>>> >>>>> On Fri, Dec 21, 2012 at 7:42 AM, phundisk <alex.f...@currensee.com> >>>>> wrote: >>>>> > This seems to be happening in my development network but not in >>>>> > production >>>>> > which I guess is good. This happens when running both interactively >>>>> > and via >>>>> > the automatic service run. This is happening on multiple servers. >>>>> > Have >>>>> > already tried to uninstall and reinstall. >>>>> > >>>>> > Windows Puppet Agent: 2.7.20 >>>>> > >>>>> > When I run it interactively I can see the problem. I issue the >>>>> > command >>>>> > ''puppet agent --test --noop'' but it also happens with running the >>>>> > regular >>>>> > puppet command. >>>>> > Puppet will hang after it loads facts. It will stay this was until I >>>>> > press >>>>> > enter. (see screenshot 1st.png) It will stay this way forever until >>>>> > I >>>>> > press enter. >>>>> > >>>>> > Upon pressing enter, I receive a message Resolution.exec with a shell >>>>> > built-in is deprecated. (See screenshot 2nd.png) >>>>> > >>>>> > Anyone have any ideas on how to resolve this? >>>>> > >>>>> > _____________________________________________________ >>>>> > This email and any files transmitted with it are confidential and >>>>> > intended >>>>> > solely for the addressee. If you received this email in error, >>>>> > please do >>>>> > not disclose the contents to anyone; kindly notify the sender by >>>>> > return >>>>> > email and delete this email and any attachments from your system. >>>>> > >>>>> > © 2011 Currensee Inc. is a member of the National Futures Association >>>>> > (NFA) >>>>> > Member ID 0403251 | Over the counter retail foreign currency (Forex) >>>>> > trading >>>>> > may involve significant risk of loss. It is not suitable for all >>>>> > investors >>>>> > and you should make sure you understand the risks involved before >>>>> > trading >>>>> > and seek independent advice if necessary. Performance, strategies and >>>>> > charts >>>>> > shown are not necessarily predictive of any particular result and >>>>> > past >>>>> > performance is no indication of future results. Investor returns may >>>>> > vary >>>>> > from Trade Leader returns based on slippage, fees, broker spreads, >>>>> > volatility or other market conditions. >>>>> > >>>>> > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>>>> > +1.617.624.3824 >>>>> > >>>>> > -- >>>>> > You received this message because you are subscribed to the Google >>>>> > Groups >>>>> > "Puppet Users" group. >>>>> > To view this discussion on the web visit >>>>> > https://groups.google.com/d/msg/puppet-users/-/TacX5LerBLUJ. >>>>> > To post to this group, send email to puppet...@googlegroups.com. >>>>> > To unsubscribe from this group, send email to >>>>> > puppet-users...@googlegroups.com. >>>>> > For more options, visit this group at >>>>> > http://groups.google.com/group/puppet-users?hl=en. >>>>> >>>>> >>>>> >>>>> -- >>>>> Josh Cooper >>>>> Developer, Puppet Labs >>>> >>>> >>>> _____________________________________________________ >>>> This email and any files transmitted with it are confidential and >>>> intended solely for the addressee. If you received this email in error, >>>> please do not disclose the contents to anyone; kindly notify the sender by >>>> return email and delete this email and any attachments from your system. >>>> >>>> © 2011 Currensee Inc. is a member of the National Futures Association >>>> (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) >>>> trading may involve significant risk of loss. It is not suitable for all >>>> investors and you should make sure you understand the risks involved before >>>> trading and seek independent advice if necessary. Performance, strategies >>>> and charts shown are not necessarily predictive of any particular result and >>>> past performance is no indication of future results. Investor returns may >>>> vary from Trade Leader returns based on slippage, fees, broker spreads, >>>> volatility or other market conditions. >>>> >>>> Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>>> +1.617.624.3824 >> >> >> >> Can you try removing ''c:\Program Files\TortoiseSVN\bin;c:\Program >> Files\SlikSvn\bin'' from your PATH >> >> Josh > > > _____________________________________________________ > This email and any files transmitted with it are confidential and intended > solely for the addressee. If you received this email in error, please do > not disclose the contents to anyone; kindly notify the sender by return > email and delete this email and any attachments from your system. > > © 2011 Currensee Inc. is a member of the National Futures Association (NFA) > Member ID 0403251 | Over the counter retail foreign currency (Forex) trading > may involve significant risk of loss. It is not suitable for all investors > and you should make sure you understand the risks involved before trading > and seek independent advice if necessary. Performance, strategies and charts > shown are not necessarily predictive of any particular result and past > performance is no indication of future results. Investor returns may vary > from Trade Leader returns based on slippage, fees, broker spreads, > volatility or other market conditions. > > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824 > > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/puppet-users/-/piHpC7JLxLgJ. > > To post to this group, send email to puppet-users@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en.-- Josh Cooper Developer, Puppet Labs -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
I tried the following config changes in stdlib (version v3.1.1) but it is
still handing until I press enter during the puppet run. I was thinking
about trying any of the following...
Upgrading Ruby on the Windows machine
Point the windows machine to another puppet server
Run puppet via scheduled task command and or command line (if that produces
no problems)
Change version of STDLIB?
"modules/stdlib/spec/unit/facter/root_home_spec.rb"
context "windows" do
#before :each do
# Facter::Util::Resolution.expects(:exec).with("getent passwd
root").returns(nil)
#end
#it "should be nil on windows" do
# Facter::Util::RootHome.get_root_home.should be_nil
#end
end
modules/stdlib/lib/facter/root_home.rb
module Facter::Util::RootHome
class << self
def get_root_home
# root_ent = Facter::Util::Resolution.exec("getent passwd root")
# The home directory is the sixth element in the passwd entry
# If the platform doesn''t have getent, root_ent will be nil and we
should
# return it straight away.
# root_ent && root_ent.split(":")[5]
end
end
end
#Facter.add(:root_home) do
# setcode { Facter::Util::RootHome.get_root_home }
# end
On Monday, January 7, 2013 12:51:25 PM UTC-5, Josh Cooper
wrote:>
> Hi Alex,
>
> On Mon, Jan 7, 2013 at 7:56 AM, phundisk
<alex.f...@currensee.com<javascript:>>
> wrote:
> > I removed these from my path and restarted. When running puppet it
> still
> > seems to hang. I tried to comment out the section in root_home.rb
that
> > facter seems to be hanging on but the file was overwritten when
> attempting
> > to run puppet again.
>
> Ah, the root_home fact is part of the puppetlabs stdlib module. When
> you run facter, only facts that are part of facter itself are
> evaluated.
>
> But, when you run puppet, it runs facter, but tells it load facts from
> additional directories, e.g. from modules'' facter directories.
>
> The stdlib module is updated each time the agent does a pluginsync,
> which is why your edits are getting overwritten.
>
> > Is there an update to this file or facter itself?
>
> The root_home fact calls `getent passwd root`, can you try executing
> that from the command line?
>
> Also, on the master, you might try editing the fact root_home.rb in
> the stdlib module, e.g.
> /etc/puppet/modules/stdlib/lib/facter/root_home.rb. Either to skip the
> exec on windows:
>
> require ''facter/util/config''
> unless Facter::Util::Config.is_windows?
> root_ent = Facter::Util::Resolution.exec("getent passwd
root")
> ...
> end
>
> Or add another fact for root_home confined to windows:
>
> Facter.add("root_home") do
> confine :kernel => :windows
> setcode do
>
"#{ENV[''SYSTEMDRIVE'']}/Users/Administrator"
> end
> end
>
> > Currently the package installed is
> > https://downloads.puppetlabs.com/windows/puppet-2.7.20.msi
> >
> >
> > On Friday, January 4, 2013 6:57:58 PM UTC-5, Josh Cooper wrote:
> >>
> >> On Friday, January 4, 2013 11:01:00 AM UTC-8, phundisk wrote:
> >>>
> >>> Can anyone make sense of the output below? I am still
experiencing
> this
> >>> error. Does this require any configuration change on the
puppet
> server?
> >>>
> >>> On Friday, December 21, 2012 4:45:30 PM UTC-5, phundisk wrote:
> >>>>
> >>>> Hi Josh!
> >>>>
> >>>> Making the changes and running the command I got the
following... (I
> >>>> made the change in C:\Program Files (x86)\Puppet
> >>>> Labs\Puppet\facter\lib\facter\util\ as that was the only
> resolution.rb I
> >>>> could find) We do not use cygwin or msys on this system.
> >>>>
> >>>> [0;32mFound no suitable resolves of 1 for xendomains [0m
> >>>> [0;32mvalue for xendomains is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m
> >>>> [0;32mvalue for selinux is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for selinux_mode [0m
> >>>> [0;32mvalue for selinux_mode is still nil [0m
> >>>> [0;32mvalue for netmask_teredo_tunneling_pseudo_interface
is still
> nil
> >>>> [0m
> >>>> [0;32mFound no suitable resolves of 1 for vlans [0m
> >>>> [0;32mvalue for vlans is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m
> >>>> [0;32mvalue for selinux is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for
selinux_config_policy [0m
> >>>> [0;32mvalue for selinux_config_policy is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for lsbdistcodename
[0m
> >>>> [0;32mvalue for lsbdistcodename is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for
> >>>> arp_loopback_pseudo_interface_1 [0m
> >>>> [0;32mvalue for arp_loopback_pseudo_interface_1 is still
nil [0m
> >>>> [0;32mvalue for sshrsakey is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m
> >>>> [0;32mvalue for selinux is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for
selinux_config_mode [0m
> >>>> [0;32mvalue for selinux_config_mode is still nil [0m
> >>>> [0;32mFound no suitable resolves of 2 for processor [0m
> >>>> [0;32mvalue for processor is still nil [0m
> >>>> [0;32mexecuting C:\Windows/system32/netsh.exe interface
ipv6 show
> >>>> address level=verbose [0m
> >>>> [0;32mFound no suitable resolves of 1 for lsbrelease [0m
> >>>> [0;32mvalue for lsbrelease is still nil [0m
> >>>> [0;32mvalue for
macaddress_teredo_tunneling_pseudo_interface is still
> >>>> nil [0m
> >>>> [0;32mvalue for macaddress_local_area_connection is still
nil [0m
> >>>> [0;32mvalue for macaddress_loopback_pseudo_interface_1 is
still nil
> [0m
> >>>> [0;32mvalue for sshecdsakey is still nil [0m
> >>>> architecture => x64
> >>>> dir => C:\Program Files (x86)\Puppet Labs\Puppet\facter
> >>>> domain => local.currensee.com
> >>>> env_windows_installdir => C:\Program Files (x86)\Puppet
Labs\Puppet
> >>>> facterversion => 1.6.14
> >>>> fqdn => mt4-mgr-qaprod.local.currensee.com
> >>>> hardwaremodel => x64
> >>>> hostname => mt4-mgr-qaprod
> >>>> id => mt4-mgr-qaprod\administrator
> >>>> interfaces =>
> >>>>
>
Loopback_Pseudo_Interface_1,Local_Area_Connection,Teredo_Tunneling_Pseudo_Interface
>
> >>>> ipaddress => 192.168.5.75
> >>>> ipaddress6 => 2001:0:9d38:6ab8:3d:37bb:3f57:fab4
> >>>> ipaddress6_teredo_tunneling_pseudo_interface =>
> >>>> 2001:0:9d38:6ab8:3d:37bb:3f57:fab4
> >>>> ipaddress_local_area_connection => 192.168.5.75
> >>>> ipaddress_loopback_pseudo_interface_1 => 127.0.0.1
> >>>> kernel => windows
> >>>> kernelmajversion => 6.1
> >>>> kernelrelease => 6.1.7600
> >>>> kernelversion => 6.1.7600
> >>>> macaddress => B8:AC:6F:B6:22:F9
> >>>> manufacturer => Dell Inc.
> >>>> memoryfree => 1.98 GB
> >>>> memorysize => 3.97 GB
> >>>> memorytotal => 3.97 GB
> >>>> netmask_local_area_connection => 255.255.255.0
> >>>> netmask_loopback_pseudo_interface_1 => 255.0.0.0
> >>>> network_local_area_connection => 192.168.5.0
> >>>> network_loopback_pseudo_interface_1 => 127.0.0.0
> >>>> operatingsystem => windows
> >>>> operatingsystemrelease => 6.1.7600
> >>>> osfamily => windows
> >>>> path => C:\Program Files (x86)\Puppet
> Labs\Puppet\puppet\bin;C:\Program
> >>>> Files (x86)\Puppet Labs\Puppet\facter\bin;C:\Program Files
> (x86)\Puppet
> >>>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet
> >>>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet
> >>>> Labs\Puppet\sys\tools\bin;C:\Program Files (x86)\Puppet
> >>>> Labs\Puppet\puppet\bin;C:\Program Files (x86)\Puppet
> >>>> Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet
> >>>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet
> >>>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet
> >>>>
>
Labs\Puppet\sys\tools\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program
>
> >>>> Files\TortoiseSVN\bin;c:\Program Files\SlikSvn\bin
> >>>> physicalprocessorcount => 1
> >>>> processor0 => Intel(R) Core(TM)2 Quad CPU Q8400 @
2.66GHz
> >>>> processor1 => Intel(R) Core(TM)2 Quad CPU Q8400 @
2.66GHz
> >>>> processor2 => Intel(R) Core(TM)2 Quad CPU Q8400 @
2.66GHz
> >>>> processor3 => Intel(R) Core(TM)2 Quad CPU Q8400 @
2.66GHz
> >>>> processorcount => 4
> >>>> productname => Vostro 230
> >>>> ps => tasklist.exe
> >>>> puppetversion => 2.7.20
> >>>> rubysitedir => C:/Program Files (x86)/Puppet
> >>>> Labs/Puppet/sys/ruby/lib/ruby/site_ruby/1.8
> >>>> rubyversion => 1.8.7
> >>>> serialnumber => 9CH3KM1
> >>>> timezone => Morocco Standard Time
> >>>> uptime => 3 days
> >>>> uptime_days => 3
> >>>> uptime_hours => 77
> >>>> uptime_seconds => 279298
> >>>> [0;32mexecuting C:\Windows\system32\arp.EXE -a [0m
> >>>> [0;32mNot an EC2 host [0m
> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m
> >>>> [0;32mvalue for selinux is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for
selinux_current_mode [0m
> >>>> [0;32mvalue for selinux_current_mode is still nil [0m
> >>>> [0;32mexecuting C:\Windows\system32\whoami.EXE [0m
> >>>> [0;32mexecuting uname -p [0m
> >>>> [0;32mvalue for hardwareisa is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for
lsbmajdistrelease [0m
> >>>> [0;32mvalue for lsbmajdistrelease is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m
> >>>> [0;32mvalue for selinux is still nil [0m
> >>>> [0;32mFound no suitable resolves of 3 for swapfree [0m
> >>>> [0;32mvalue for swapfree is still nil [0m
> >>>> [0;32mvalue for network_teredo_tunneling_pseudo_interface
is still
> nil
> >>>> [0m
> >>>> [0;32mFound no suitable resolves of 1 for lsbdistid [0m
> >>>> [0;32mvalue for lsbdistid is still nil [0m
> >>>> [0;32mvalue for ipaddress6_local_area_connection is still
nil [0m
> >>>> [0;32mruby-augeas not available [0m
> >>>> [0;32mvalue for augeasversion is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for arp [0m
> >>>> [0;32mvalue for arp is still nil [0m
> >>>> [0;32mvalue for ipaddress6_loopback_pseudo_interface_1 is
still nil
> [0m
> >>>> [0;32mvalue for sshdsakey is still nil [0m
> >>>> [0;32mvalue for cfkey is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for swapencrypted
[0m
> >>>> [0;32mvalue for swapencrypted is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m
> >>>> [0;32mvalue for selinux is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for
selinux_policyversion [0m
> >>>> [0;32mvalue for selinux_policyversion is still nil [0m
> >>>> [0;32mvalue for
ipaddress_teredo_tunneling_pseudo_interface is still
> nil
> >>>> [0m
> >>>> [0;32mexecuting C:\Windows\system32\hostname.EXE [0m
> >>>> [0;32mFound no suitable resolves of 1 for lsbdistrelease
[0m
> >>>> [0;32mvalue for lsbdistrelease is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for
> >>>> arp_teredo_tunneling_pseudo_interface [0m
> >>>> [0;32mvalue for arp_teredo_tunneling_pseudo_interface is
still nil
> [0m
> >>>> [0;32mexecuting virt-what [0m
> >>>> [0;32mvalue for virtual is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for uniqueid [0m
> >>>> [0;32mvalue for uniqueid is still nil [0m
> >>>> [0;32mFound no suitable resolves of 3 for swapsize [0m
> >>>> [0;32mvalue for swapsize is still nil [0m
> >>>> [0;32mvalue for mtu_teredo_tunneling_pseudo_interface is
still nil
> [0m
> >>>> [0;32mFound no suitable resolves of 1 for netmask [0m
> >>>> [0;32mvalue for netmask is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m
> >>>> [0;32mvalue for selinux is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for selinux_enforced
[0m
> >>>> [0;32mvalue for selinux_enforced is still nil [0m
> >>>> [0;32mvalue for mtu_local_area_connection is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for
lsbdistdescription [0m
> >>>> [0;32mvalue for lsbdistdescription is still nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for is_virtual [0m
> >>>> [0;32mvalue for is_virtual is still nil [0m
> >>>> [0;32mvalue for mtu_loopback_pseudo_interface_1 is still
nil [0m
> >>>> [0;32mFound no suitable resolves of 1 for
arp_local_area_connection
> [0m
> >>>> [0;32mvalue for arp_local_area_connection is still nil [0m
> >>>> [0;32mFound no suitable resolves of 2 for iphostnumber [0m
> >>>> [0;32mvalue for iphostnumber is still nil [0m
> >>>>
> >>>>
> >>>> On Friday, December 21, 2012 2:06:22 PM UTC-5, Josh Cooper
wrote:
> >>>>>
> >>>>> Facter is executing some command that is trying to
read from stdin,
> >>>>> and is hanging. Do you happen to have cygwin or msys
installed in
> >>>>> development?
> >>>>>
> >>>>> To figure out which fact is causing the problem,
I''d add the
> following
> >>>>> to C:\Program Files (x86)\Puppet
> >>>>> Labs\Puppet\facter\util\resolution.rb, around line
133:
> >>>>>
> >>>>> begin
> >>>>> Facter.debug("executing #{code}") # Add
this line
> >>>>> out = %x{#{code}}.chomp
> >>>>>
> >>>>> Then run: facter --debug --trace
> >>>>>
> >>>>> Josh
> >>>>>
> >>>>> On Fri, Dec 21, 2012 at 7:42 AM, phundisk
<alex.f...@currensee.com>
> >>>>> wrote:
> >>>>> > This seems to be happening in my development
network but not in
> >>>>> > production
> >>>>> > which I guess is good. This happens when running
both
> interactively
> >>>>> > and via
> >>>>> > the automatic service run. This is happening on
multiple servers.
> >>>>> > Have
> >>>>> > already tried to uninstall and reinstall.
> >>>>> >
> >>>>> > Windows Puppet Agent: 2.7.20
> >>>>> >
> >>>>> > When I run it interactively I can see the
problem. I issue the
> >>>>> > command
> >>>>> > ''puppet agent --test --noop''
but it also happens with running the
> >>>>> > regular
> >>>>> > puppet command.
> >>>>> > Puppet will hang after it loads facts. It will
stay this was
> until I
> >>>>> > press
> >>>>> > enter. (see screenshot 1st.png) It will stay
this way forever
> until
> >>>>> > I
> >>>>> > press enter.
> >>>>> >
> >>>>> > Upon pressing enter, I receive a message
Resolution.exec with a
> shell
> >>>>> > built-in is deprecated. (See screenshot 2nd.png)
> >>>>> >
> >>>>> > Anyone have any ideas on how to resolve this?
> >>>>> >
> >>>>> >
_____________________________________________________
> >>>>> > This email and any files transmitted with it are
confidential and
> >>>>> > intended
> >>>>> > solely for the addressee. If you received this
email in error,
> >>>>> > please do
> >>>>> > not disclose the contents to anyone; kindly
notify the sender by
> >>>>> > return
> >>>>> > email and delete this email and any attachments
from your system.
> >>>>> >
> >>>>> > © 2011 Currensee Inc. is a member of the National
Futures
> Association
> >>>>> > (NFA)
> >>>>> > Member ID 0403251 | Over the counter retail
foreign currency
> (Forex)
> >>>>> > trading
> >>>>> > may involve significant risk of loss. It is not
suitable for all
> >>>>> > investors
> >>>>> > and you should make sure you understand the risks
involved before
> >>>>> > trading
> >>>>> > and seek independent advice if necessary.
Performance, strategies
> and
> >>>>> > charts
> >>>>> > shown are not necessarily predictive of any
particular result and
> >>>>> > past
> >>>>> > performance is no indication of future results.
Investor returns
> may
> >>>>> > vary
> >>>>> > from Trade Leader returns based on slippage,
fees, broker spreads,
> >>>>> > volatility or other market conditions.
> >>>>> >
> >>>>> > Currensee Inc | 54 Canal St 4th Floor | Boston,
MA 02114 |
> >>>>> > +1.617.624.3824
> >>>>> >
> >>>>> > --
> >>>>> > You received this message because you are
subscribed to the Google
> >>>>> > Groups
> >>>>> > "Puppet Users" group.
> >>>>> > To view this discussion on the web visit
> >>>>> >
https://groups.google.com/d/msg/puppet-users/-/TacX5LerBLUJ.
> >>>>> > To post to this group, send email to
puppet...@googlegroups.com.
> >>>>> > To unsubscribe from this group, send email to
> >>>>> > puppet-users...@googlegroups.com.
> >>>>> > For more options, visit this group at
> >>>>> >
http://groups.google.com/group/puppet-users?hl=en.
> >>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Josh Cooper
> >>>>> Developer, Puppet Labs
> >>>>
> >>>>
> >>>> _____________________________________________________
> >>>> This email and any files transmitted with it are
confidential and
> >>>> intended solely for the addressee. If you received this
email in
> error,
> >>>> please do not disclose the contents to anyone; kindly
notify the
> sender by
> >>>> return email and delete this email and any attachments
from your
> system.
> >>>>
> >>>> © 2011 Currensee Inc. is a member of the National Futures
Association
> >>>> (NFA) Member ID 0403251 | Over the counter retail foreign
currency
> (Forex)
> >>>> trading may involve significant risk of loss. It is not
suitable for
> all
> >>>> investors and you should make sure you understand the
risks involved
> before
> >>>> trading and seek independent advice if necessary.
Performance,
> strategies
> >>>> and charts shown are not necessarily predictive of any
particular
> result and
> >>>> past performance is no indication of future results.
Investor returns
> may
> >>>> vary from Trade Leader returns based on slippage, fees,
broker
> spreads,
> >>>> volatility or other market conditions.
> >>>>
> >>>> Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 |
> >>>> +1.617.624.3824
> >>
> >>
> >>
> >> Can you try removing ''c:\Program
Files\TortoiseSVN\bin;c:\Program
> >> Files\SlikSvn\bin'' from your PATH
> >>
> >> Josh
> >
> >
> > _____________________________________________________
> > This email and any files transmitted with it are confidential and
> intended
> > solely for the addressee. If you received this email in error, please
> do
> > not disclose the contents to anyone; kindly notify the sender by
return
> > email and delete this email and any attachments from your system.
> >
> > © 2011 Currensee Inc. is a member of the National Futures Association
> (NFA)
> > Member ID 0403251 | Over the counter retail foreign currency (Forex)
> trading
> > may involve significant risk of loss. It is not suitable for all
> investors
> > and you should make sure you understand the risks involved before
> trading
> > and seek independent advice if necessary. Performance, strategies and
> charts
> > shown are not necessarily predictive of any particular result and past
> > performance is no indication of future results. Investor returns may
> vary
> > from Trade Leader returns based on slippage, fees, broker spreads,
> > volatility or other market conditions.
> >
> > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 |
> +1.617.624.3824
> >
> > --
> > You received this message because you are subscribed to the Google
> Groups
> > "Puppet Users" group.
> > To view this discussion on the web visit
> > https://groups.google.com/d/msg/puppet-users/-/piHpC7JLxLgJ.
> >
> > To post to this group, send email to
puppet...@googlegroups.com<javascript:>.
>
> > To unsubscribe from this group, send email to
> > puppet-users...@googlegroups.com <javascript:>.
> > For more options, visit this group at
> > http://groups.google.com/group/puppet-users?hl=en.
>
>
>
> --
> Josh Cooper
> Developer, Puppet Labs
>
--
_____________________________________________________
This email and any files transmitted with it are confidential and intended
solely for the addressee. If you received this email in error, please do
not disclose the contents to anyone; kindly notify the sender by return
email and delete this email and any attachments from your system.
© 2011 Currensee Inc. is a member of the National Futures Association (NFA)
Member ID 0403251 | Over the counter retail foreign currency (Forex)
trading may involve significant risk of loss. It is not suitable for all
investors and you should make sure you understand the risks involved before
trading and seek independent advice if necessary. Performance, strategies
and charts shown are not necessarily predictive of any particular result
and past performance is no indication of future results. Investor returns
may vary from Trade Leader returns based on slippage, fees, broker spreads,
volatility or other market conditions.
Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/puppet-users/-/a4b09nLvoEwJ.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
Hi Alex, I''m having the same problem as you with Puppet Enterprise 2.7.19 on Windows SBS 2008. I''ve tracked down the cause of the problem to the example42/puppi module. Try running the following on your puppetmaster and then do a Puppet run on your Windows box and see if the problem persists: puppet module uninstall --force example42/puppi Removing puppi worked for me. If you''re using any of the example42 module then you might be able to fix this behaviour in puppi by editing "modules/puppi/lib/facter/puppi_projects.rb" on your puppetmaster. I haven''t submitted a bug report on puppi yet so feel free to do so. Cheers, Matt On Wednesday, January 9, 2013 4:43:44 AM UTC+13, phundisk wrote:> > I tried the following config changes in stdlib (version v3.1.1) but it is > still handing until I press enter during the puppet run. I was thinking > about trying any of the following... > > Upgrading Ruby on the Windows machine > Point the windows machine to another puppet server > Run puppet via scheduled task command and or command line (if that > produces no problems) > Change version of STDLIB? > > > "modules/stdlib/spec/unit/facter/root_home_spec.rb" > context "windows" do > #before :each do > # Facter::Util::Resolution.expects(:exec).with("getent passwd > root").returns(nil) > #end > #it "should be nil on windows" do > # Facter::Util::RootHome.get_root_home.should be_nil > #end > end > > > modules/stdlib/lib/facter/root_home.rb > > module Facter::Util::RootHome > class << self > def get_root_home > # root_ent = Facter::Util::Resolution.exec("getent passwd root") > # The home directory is the sixth element in the passwd entry > # If the platform doesn''t have getent, root_ent will be nil and we > should > # return it straight away. > # root_ent && root_ent.split(":")[5] > end > end > end > > #Facter.add(:root_home) do > # setcode { Facter::Util::RootHome.get_root_home } > # end > > On Monday, January 7, 2013 12:51:25 PM UTC-5, Josh Cooper wrote: >> >> Hi Alex, >> >> On Mon, Jan 7, 2013 at 7:56 AM, phundisk <alex.f...@currensee.com> >> wrote: >> > I removed these from my path and restarted. When running puppet it >> still >> > seems to hang. I tried to comment out the section in root_home.rb that >> > facter seems to be hanging on but the file was overwritten when >> attempting >> > to run puppet again. >> >> Ah, the root_home fact is part of the puppetlabs stdlib module. When >> you run facter, only facts that are part of facter itself are >> evaluated. >> >> But, when you run puppet, it runs facter, but tells it load facts from >> additional directories, e.g. from modules'' facter directories. >> >> The stdlib module is updated each time the agent does a pluginsync, >> which is why your edits are getting overwritten. >> >> > Is there an update to this file or facter itself? >> >> The root_home fact calls `getent passwd root`, can you try executing >> that from the command line? >> >> Also, on the master, you might try editing the fact root_home.rb in >> the stdlib module, e.g. >> /etc/puppet/modules/stdlib/lib/facter/root_home.rb. Either to skip the >> exec on windows: >> >> require ''facter/util/config'' >> unless Facter::Util::Config.is_windows? >> root_ent = Facter::Util::Resolution.exec("getent passwd root") >> ... >> end >> >> Or add another fact for root_home confined to windows: >> >> Facter.add("root_home") do >> confine :kernel => :windows >> setcode do >> "#{ENV[''SYSTEMDRIVE'']}/Users/Administrator" >> end >> end >> >> > Currently the package installed is >> > https://downloads.puppetlabs.com/windows/puppet-2.7.20.msi >> > >> > >> > On Friday, January 4, 2013 6:57:58 PM UTC-5, Josh Cooper wrote: >> >> >> >> On Friday, January 4, 2013 11:01:00 AM UTC-8, phundisk wrote: >> >>> >> >>> Can anyone make sense of the output below? I am still experiencing >> this >> >>> error. Does this require any configuration change on the puppet >> server? >> >>> >> >>> On Friday, December 21, 2012 4:45:30 PM UTC-5, phundisk wrote: >> >>>> >> >>>> Hi Josh! >> >>>> >> >>>> Making the changes and running the command I got the following... (I >> >>>> made the change in C:\Program Files (x86)\Puppet >> >>>> Labs\Puppet\facter\lib\facter\util\ as that was the only >> resolution.rb I >> >>>> could find) We do not use cygwin or msys on this system. >> >>>> >> >>>> [0;32mFound no suitable resolves of 1 for xendomains [0m >> >>>> [0;32mvalue for xendomains is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >> >>>> [0;32mvalue for selinux is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux_mode [0m >> >>>> [0;32mvalue for selinux_mode is still nil [0m >> >>>> [0;32mvalue for netmask_teredo_tunneling_pseudo_interface is still >> nil >> >>>> [0m >> >>>> [0;32mFound no suitable resolves of 1 for vlans [0m >> >>>> [0;32mvalue for vlans is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >> >>>> [0;32mvalue for selinux is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux_config_policy [0m >> >>>> [0;32mvalue for selinux_config_policy is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for lsbdistcodename [0m >> >>>> [0;32mvalue for lsbdistcodename is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for >> >>>> arp_loopback_pseudo_interface_1 [0m >> >>>> [0;32mvalue for arp_loopback_pseudo_interface_1 is still nil [0m >> >>>> [0;32mvalue for sshrsakey is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >> >>>> [0;32mvalue for selinux is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux_config_mode [0m >> >>>> [0;32mvalue for selinux_config_mode is still nil [0m >> >>>> [0;32mFound no suitable resolves of 2 for processor [0m >> >>>> [0;32mvalue for processor is still nil [0m >> >>>> [0;32mexecuting C:\Windows/system32/netsh.exe interface ipv6 show >> >>>> address level=verbose [0m >> >>>> [0;32mFound no suitable resolves of 1 for lsbrelease [0m >> >>>> [0;32mvalue for lsbrelease is still nil [0m >> >>>> [0;32mvalue for macaddress_teredo_tunneling_pseudo_interface is >> still >> >>>> nil [0m >> >>>> [0;32mvalue for macaddress_local_area_connection is still nil [0m >> >>>> [0;32mvalue for macaddress_loopback_pseudo_interface_1 is still nil >> [0m >> >>>> [0;32mvalue for sshecdsakey is still nil [0m >> >>>> architecture => x64 >> >>>> dir => C:\Program Files (x86)\Puppet Labs\Puppet\facter >> >>>> domain => local.currensee.com >> >>>> env_windows_installdir => C:\Program Files (x86)\Puppet Labs\Puppet >> >>>> facterversion => 1.6.14 >> >>>> fqdn => mt4-mgr-qaprod.local.currensee.com >> >>>> hardwaremodel => x64 >> >>>> hostname => mt4-mgr-qaprod >> >>>> id => mt4-mgr-qaprod\administrator >> >>>> interfaces => >> >>>> >> Loopback_Pseudo_Interface_1,Local_Area_Connection,Teredo_Tunneling_Pseudo_Interface >> >> >>>> ipaddress => 192.168.5.75 >> >>>> ipaddress6 => 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >> >>>> ipaddress6_teredo_tunneling_pseudo_interface => >> >>>> 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >> >>>> ipaddress_local_area_connection => 192.168.5.75 >> >>>> ipaddress_loopback_pseudo_interface_1 => 127.0.0.1 >> >>>> kernel => windows >> >>>> kernelmajversion => 6.1 >> >>>> kernelrelease => 6.1.7600 >> >>>> kernelversion => 6.1.7600 >> >>>> macaddress => B8:AC:6F:B6:22:F9 >> >>>> manufacturer => Dell Inc. >> >>>> memoryfree => 1.98 GB >> >>>> memorysize => 3.97 GB >> >>>> memorytotal => 3.97 GB >> >>>> netmask_local_area_connection => 255.255.255.0 >> >>>> netmask_loopback_pseudo_interface_1 => 255.0.0.0 >> >>>> network_local_area_connection => 192.168.5.0 >> >>>> network_loopback_pseudo_interface_1 => 127.0.0.0 >> >>>> operatingsystem => windows >> >>>> operatingsystemrelease => 6.1.7600 >> >>>> osfamily => windows >> >>>> path => C:\Program Files (x86)\Puppet >> Labs\Puppet\puppet\bin;C:\Program >> >>>> Files (x86)\Puppet Labs\Puppet\facter\bin;C:\Program Files >> (x86)\Puppet >> >>>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >> >>>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >> >>>> Labs\Puppet\sys\tools\bin;C:\Program Files (x86)\Puppet >> >>>> Labs\Puppet\puppet\bin;C:\Program Files (x86)\Puppet >> >>>> Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet >> >>>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >> >>>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >> >>>> >> Labs\Puppet\sys\tools\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program >> >> >>>> Files\TortoiseSVN\bin;c:\Program Files\SlikSvn\bin >> >>>> physicalprocessorcount => 1 >> >>>> processor0 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >> >>>> processor1 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >> >>>> processor2 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >> >>>> processor3 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >> >>>> processorcount => 4 >> >>>> productname => Vostro 230 >> >>>> ps => tasklist.exe >> >>>> puppetversion => 2.7.20 >> >>>> rubysitedir => C:/Program Files (x86)/Puppet >> >>>> Labs/Puppet/sys/ruby/lib/ruby/site_ruby/1.8 >> >>>> rubyversion => 1.8.7 >> >>>> serialnumber => 9CH3KM1 >> >>>> timezone => Morocco Standard Time >> >>>> uptime => 3 days >> >>>> uptime_days => 3 >> >>>> uptime_hours => 77 >> >>>> uptime_seconds => 279298 >> >>>> [0;32mexecuting C:\Windows\system32\arp.EXE -a [0m >> >>>> [0;32mNot an EC2 host [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >> >>>> [0;32mvalue for selinux is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux_current_mode [0m >> >>>> [0;32mvalue for selinux_current_mode is still nil [0m >> >>>> [0;32mexecuting C:\Windows\system32\whoami.EXE [0m >> >>>> [0;32mexecuting uname -p [0m >> >>>> [0;32mvalue for hardwareisa is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for lsbmajdistrelease [0m >> >>>> [0;32mvalue for lsbmajdistrelease is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >> >>>> [0;32mvalue for selinux is still nil [0m >> >>>> [0;32mFound no suitable resolves of 3 for swapfree [0m >> >>>> [0;32mvalue for swapfree is still nil [0m >> >>>> [0;32mvalue for network_teredo_tunneling_pseudo_interface is still >> nil >> >>>> [0m >> >>>> [0;32mFound no suitable resolves of 1 for lsbdistid [0m >> >>>> [0;32mvalue for lsbdistid is still nil [0m >> >>>> [0;32mvalue for ipaddress6_local_area_connection is still nil [0m >> >>>> [0;32mruby-augeas not available [0m >> >>>> [0;32mvalue for augeasversion is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for arp [0m >> >>>> [0;32mvalue for arp is still nil [0m >> >>>> [0;32mvalue for ipaddress6_loopback_pseudo_interface_1 is still nil >> [0m >> >>>> [0;32mvalue for sshdsakey is still nil [0m >> >>>> [0;32mvalue for cfkey is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for swapencrypted [0m >> >>>> [0;32mvalue for swapencrypted is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >> >>>> [0;32mvalue for selinux is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux_policyversion [0m >> >>>> [0;32mvalue for selinux_policyversion is still nil [0m >> >>>> [0;32mvalue for ipaddress_teredo_tunneling_pseudo_interface is still >> nil >> >>>> [0m >> >>>> [0;32mexecuting C:\Windows\system32\hostname.EXE [0m >> >>>> [0;32mFound no suitable resolves of 1 for lsbdistrelease [0m >> >>>> [0;32mvalue for lsbdistrelease is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for >> >>>> arp_teredo_tunneling_pseudo_interface [0m >> >>>> [0;32mvalue for arp_teredo_tunneling_pseudo_interface is still nil >> [0m >> >>>> [0;32mexecuting virt-what [0m >> >>>> [0;32mvalue for virtual is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for uniqueid [0m >> >>>> [0;32mvalue for uniqueid is still nil [0m >> >>>> [0;32mFound no suitable resolves of 3 for swapsize [0m >> >>>> [0;32mvalue for swapsize is still nil [0m >> >>>> [0;32mvalue for mtu_teredo_tunneling_pseudo_interface is still nil >> [0m >> >>>> [0;32mFound no suitable resolves of 1 for netmask [0m >> >>>> [0;32mvalue for netmask is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >> >>>> [0;32mvalue for selinux is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for selinux_enforced [0m >> >>>> [0;32mvalue for selinux_enforced is still nil [0m >> >>>> [0;32mvalue for mtu_local_area_connection is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for lsbdistdescription [0m >> >>>> [0;32mvalue for lsbdistdescription is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for is_virtual [0m >> >>>> [0;32mvalue for is_virtual is still nil [0m >> >>>> [0;32mvalue for mtu_loopback_pseudo_interface_1 is still nil [0m >> >>>> [0;32mFound no suitable resolves of 1 for arp_local_area_connection >> [0m >> >>>> [0;32mvalue for arp_local_area_connection is still nil [0m >> >>>> [0;32mFound no suitable resolves of 2 for iphostnumber [0m >> >>>> [0;32mvalue for iphostnumber is still nil [0m >> >>>> >> >>>> >> >>>> On Friday, December 21, 2012 2:06:22 PM UTC-5, Josh Cooper wrote: >> >>>>> >> >>>>> Facter is executing some command that is trying to read from stdin, >> >>>>> and is hanging. Do you happen to have cygwin or msys installed in >> >>>>> development? >> >>>>> >> >>>>> To figure out which fact is causing the problem, I''d add the >> following >> >>>>> to C:\Program Files (x86)\Puppet >> >>>>> Labs\Puppet\facter\util\resolution.rb, around line 133: >> >>>>> >> >>>>> begin >> >>>>> Facter.debug("executing #{code}") # Add this line >> >>>>> out = %x{#{code}}.chomp >> >>>>> >> >>>>> Then run: facter --debug --trace >> >>>>> >> >>>>> Josh >> >>>>> >> >>>>> On Fri, Dec 21, 2012 at 7:42 AM, phundisk <alex.f...@currensee.com> >> >> >>>>> wrote: >> >>>>> > This seems to be happening in my development network but not in >> >>>>> > production >> >>>>> > which I guess is good. This happens when running both >> interactively >> >>>>> > and via >> >>>>> > the automatic service run. This is happening on multiple >> servers. >> >>>>> > Have >> >>>>> > already tried to uninstall and reinstall. >> >>>>> > >> >>>>> > Windows Puppet Agent: 2.7.20 >> >>>>> > >> >>>>> > When I run it interactively I can see the problem. I issue the >> >>>>> > command >> >>>>> > ''puppet agent --test --noop'' but it also happens with running the >> >>>>> > regular >> >>>>> > puppet command. >> >>>>> > Puppet will hang after it loads facts. It will stay this was >> until I >> >>>>> > press >> >>>>> > enter. (see screenshot 1st.png) It will stay this way forever >> until >> >>>>> > I >> >>>>> > press enter. >> >>>>> > >> >>>>> > Upon pressing enter, I receive a message Resolution.exec with a >> shell >> >>>>> > built-in is deprecated. (See screenshot 2nd.png) >> >>>>> > >> >>>>> > Anyone have any ideas on how to resolve this? >> >>>>> > >> >>>>> > _____________________________________________________ >> >>>>> > This email and any files transmitted with it are confidential and >> >>>>> > intended >> >>>>> > solely for the addressee. If you received this email in error, >> >>>>> > please do >> >>>>> > not disclose the contents to anyone; kindly notify the sender by >> >>>>> > return >> >>>>> > email and delete this email and any attachments from your system. >> >>>>> > >> >>>>> > © 2011 Currensee Inc. is a member of the National Futures >> Association >> >>>>> > (NFA) >> >>>>> > Member ID 0403251 | Over the counter retail foreign currency >> (Forex) >> >>>>> > trading >> >>>>> > may involve significant risk of loss. It is not suitable for all >> >>>>> > investors >> >>>>> > and you should make sure you understand the risks involved before >> >>>>> > trading >> >>>>> > and seek independent advice if necessary. Performance, strategies >> and >> >>>>> > charts >> >>>>> > shown are not necessarily predictive of any particular result and >> >>>>> > past >> >>>>> > performance is no indication of future results. Investor returns >> may >> >>>>> > vary >> >>>>> > from Trade Leader returns based on slippage, fees, broker >> spreads, >> >>>>> > volatility or other market conditions. >> >>>>> > >> >>>>> > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >> >>>>> > +1.617.624.3824 >> >>>>> > >> >>>>> > -- >> >>>>> > You received this message because you are subscribed to the >> Google >> >>>>> > Groups >> >>>>> > "Puppet Users" group. >> >>>>> > To view this discussion on the web visit >> >>>>> > https://groups.google.com/d/msg/puppet-users/-/TacX5LerBLUJ. >> >>>>> > To post to this group, send email to puppet...@googlegroups.com. >> >>>>> > To unsubscribe from this group, send email to >> >>>>> > puppet-users...@googlegroups.com. >> >>>>> > For more options, visit this group at >> >>>>> > http://groups.google.com/group/puppet-users?hl=en. >> >>>>> >> >>>>> >> >>>>> >> >>>>> -- >> >>>>> Josh Cooper >> >>>>> Developer, Puppet Labs >> >>>> >> >>>> >> >>>> _____________________________________________________ >> >>>> This email and any files transmitted with it are confidential and >> >>>> intended solely for the addressee. If you received this email in >> error, >> >>>> please do not disclose the contents to anyone; kindly notify the >> sender by >> >>>> return email and delete this email and any attachments from your >> system. >> >>>> >> >>>> © 2011 Currensee Inc. is a member of the National Futures >> Association >> >>>> (NFA) Member ID 0403251 | Over the counter retail foreign currency >> (Forex) >> >>>> trading may involve significant risk of loss. It is not suitable for >> all >> >>>> investors and you should make sure you understand the risks involved >> before >> >>>> trading and seek independent advice if necessary. Performance, >> strategies >> >>>> and charts shown are not necessarily predictive of any particular >> result and >> >>>> past performance is no indication of future results. Investor >> returns may >> >>>> vary from Trade Leader returns based on slippage, fees, broker >> spreads, >> >>>> volatility or other market conditions. >> >>>> >> >>>> Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >> >>>> +1.617.624.3824 >> >> >> >> >> >> >> >> Can you try removing ''c:\Program Files\TortoiseSVN\bin;c:\Program >> >> Files\SlikSvn\bin'' from your PATH >> >> >> >> Josh >> > >> > >> > _____________________________________________________ >> > This email and any files transmitted with it are confidential and >> intended >> > solely for the addressee. If you received this email in error, please >> do >> > not disclose the contents to anyone; kindly notify the sender by return >> > email and delete this email and any attachments from your system. >> > >> > © 2011 Currensee Inc. is a member of the National Futures Association >> (NFA) >> > Member ID 0403251 | Over the counter retail foreign currency (Forex) >> trading >> > may involve significant risk of loss. It is not suitable for all >> investors >> > and you should make sure you understand the risks involved before >> trading >> > and seek independent advice if necessary. Performance, strategies and >> charts >> > shown are not necessarily predictive of any particular result and past >> > performance is no indication of future results. Investor returns may >> vary >> > from Trade Leader returns based on slippage, fees, broker spreads, >> > volatility or other market conditions. >> > >> > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >> +1.617.624.3824 >> > >> > -- >> > You received this message because you are subscribed to the Google >> Groups >> > "Puppet Users" group. >> > To view this discussion on the web visit >> > https://groups.google.com/d/msg/puppet-users/-/piHpC7JLxLgJ. >> > >> > To post to this group, send email to puppet...@googlegroups.com. >> > To unsubscribe from this group, send email to >> > puppet-users...@googlegroups.com. >> > For more options, visit this group at >> > http://groups.google.com/group/puppet-users?hl=en. >> >> >> >> -- >> Josh Cooper >> Developer, Puppet Labs >> > > _____________________________________________________ > This email and any files transmitted with it are confidential and intended > solely for the addressee. If you received this email in error, please do > not disclose the contents to anyone; kindly notify the sender by return > email and delete this email and any attachments from your system. > > © 2011 Currensee Inc. is a member of the National Futures Association > (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) > trading may involve significant risk of loss. It is not suitable for all > investors and you should make sure you understand the risks involved before > trading and seek independent advice if necessary. Performance, strategies > and charts shown are not necessarily predictive of any particular result > and past performance is no indication of future results. Investor returns > may vary from Trade Leader returns based on slippage, fees, broker spreads, > volatility or other market conditions. > > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824 >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/GSMomEglm4sJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Thank you for the information! That resolved the issue. I have posted a bug report on puppi''s github https://github.com/example42/puppi/issues/45 On Saturday, January 12, 2013 4:01:49 PM UTC-5, Josh Cooper wrote:> > That module contains a last_run fact that executes ''date'', which on > windows will prompt for a new date to be entered and hang, instead of > displaying the current date. > > Josh > > On Jan 12, 2013, at 2:33 AM, Matt Purvis <ma...@purvis.co.nz <javascript:>> > wrote: > > Hi Alex, > > I''m having the same problem as you with Puppet Enterprise 2.7.19 on > Windows SBS 2008. > > I''ve tracked down the cause of the problem to the example42/puppi module. > Try running the following on your puppetmaster and then do a Puppet run on > your Windows box and see if the problem persists: > > puppet module uninstall --force example42/puppi > > Removing puppi worked for me. If you''re using any of the example42 module > then you might be able to fix this behaviour in puppi by editing > "modules/puppi/lib/facter/puppi_projects.rb" on your puppetmaster. > > I haven''t submitted a bug report on puppi yet so feel free to do so. > > Cheers, > > Matt > > > On Wednesday, January 9, 2013 4:43:44 AM UTC+13, phundisk wrote: >> >> I tried the following config changes in stdlib (version v3.1.1) but it is >> still handing until I press enter during the puppet run. I was thinking >> about trying any of the following... >> >> Upgrading Ruby on the Windows machine >> Point the windows machine to another puppet server >> Run puppet via scheduled task command and or command line (if that >> produces no problems) >> Change version of STDLIB? >> >> >> "modules/stdlib/spec/unit/facter/root_home_spec.rb" >> context "windows" do >> #before :each do >> # Facter::Util::Resolution.expects(:exec).with("getent passwd >> root").returns(nil) >> #end >> #it "should be nil on windows" do >> # Facter::Util::RootHome.get_root_home.should be_nil >> #end >> end >> >> >> modules/stdlib/lib/facter/root_home.rb >> >> module Facter::Util::RootHome >> class << self >> def get_root_home >> # root_ent = Facter::Util::Resolution.exec("getent passwd root") >> # The home directory is the sixth element in the passwd entry >> # If the platform doesn''t have getent, root_ent will be nil and we >> should >> # return it straight away. >> # root_ent && root_ent.split(":")[5] >> end >> end >> end >> >> #Facter.add(:root_home) do >> # setcode { Facter::Util::RootHome.get_root_home } >> # end >> >> On Monday, January 7, 2013 12:51:25 PM UTC-5, Josh Cooper wrote: >>> >>> Hi Alex, >>> >>> On Mon, Jan 7, 2013 at 7:56 AM, phundisk <alex.f...@currensee.com> >>> wrote: >>> > I removed these from my path and restarted. When running puppet it >>> still >>> > seems to hang. I tried to comment out the section in root_home.rb >>> that >>> > facter seems to be hanging on but the file was overwritten when >>> attempting >>> > to run puppet again. >>> >>> Ah, the root_home fact is part of the puppetlabs stdlib module. When >>> you run facter, only facts that are part of facter itself are >>> evaluated. >>> >>> But, when you run puppet, it runs facter, but tells it load facts from >>> additional directories, e.g. from modules'' facter directories. >>> >>> The stdlib module is updated each time the agent does a pluginsync, >>> which is why your edits are getting overwritten. >>> >>> > Is there an update to this file or facter itself? >>> >>> The root_home fact calls `getent passwd root`, can you try executing >>> that from the command line? >>> >>> Also, on the master, you might try editing the fact root_home.rb in >>> the stdlib module, e.g. >>> /etc/puppet/modules/stdlib/lib/facter/root_home.rb. Either to skip the >>> exec on windows: >>> >>> require ''facter/util/config'' >>> unless Facter::Util::Config.is_windows? >>> root_ent = Facter::Util::Resolution.exec("getent passwd root") >>> ... >>> end >>> >>> Or add another fact for root_home confined to windows: >>> >>> Facter.add("root_home") do >>> confine :kernel => :windows >>> setcode do >>> "#{ENV[''SYSTEMDRIVE'']}/Users/Administrator" >>> end >>> end >>> >>> > Currently the package installed is >>> > https://downloads.puppetlabs.com/windows/puppet-2.7.20.msi >>> > >>> > >>> > On Friday, January 4, 2013 6:57:58 PM UTC-5, Josh Cooper wrote: >>> >> >>> >> On Friday, January 4, 2013 11:01:00 AM UTC-8, phundisk wrote: >>> >>> >>> >>> Can anyone make sense of the output below? I am still experiencing >>> this >>> >>> error. Does this require any configuration change on the puppet >>> server? >>> >>> >>> >>> On Friday, December 21, 2012 4:45:30 PM UTC-5, phundisk wrote: >>> >>>> >>> >>>> Hi Josh! >>> >>>> >>> >>>> Making the changes and running the command I got the following... >>> (I >>> >>>> made the change in C:\Program Files (x86)\Puppet >>> >>>> Labs\Puppet\facter\lib\facter\util\ as that was the only >>> resolution.rb I >>> >>>> could find) We do not use cygwin or msys on this system. >>> >>>> >>> >>>> [0;32mFound no suitable resolves of 1 for xendomains [0m >>> >>>> [0;32mvalue for xendomains is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> >>>> [0;32mvalue for selinux is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux_mode [0m >>> >>>> [0;32mvalue for selinux_mode is still nil [0m >>> >>>> [0;32mvalue for netmask_teredo_tunneling_pseudo_interface is still >>> nil >>> >>>> [0m >>> >>>> [0;32mFound no suitable resolves of 1 for vlans [0m >>> >>>> [0;32mvalue for vlans is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> >>>> [0;32mvalue for selinux is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux_config_policy [0m >>> >>>> [0;32mvalue for selinux_config_policy is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for lsbdistcodename [0m >>> >>>> [0;32mvalue for lsbdistcodename is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for >>> >>>> arp_loopback_pseudo_interface_1 [0m >>> >>>> [0;32mvalue for arp_loopback_pseudo_interface_1 is still nil [0m >>> >>>> [0;32mvalue for sshrsakey is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> >>>> [0;32mvalue for selinux is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux_config_mode [0m >>> >>>> [0;32mvalue for selinux_config_mode is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 2 for processor [0m >>> >>>> [0;32mvalue for processor is still nil [0m >>> >>>> [0;32mexecuting C:\Windows/system32/netsh.exe interface ipv6 show >>> >>>> address level=verbose [0m >>> >>>> [0;32mFound no suitable resolves of 1 for lsbrelease [0m >>> >>>> [0;32mvalue for lsbrelease is still nil [0m >>> >>>> [0;32mvalue for macaddress_teredo_tunneling_pseudo_interface is >>> still >>> >>>> nil [0m >>> >>>> [0;32mvalue for macaddress_local_area_connection is still nil [0m >>> >>>> [0;32mvalue for macaddress_loopback_pseudo_interface_1 is still nil >>> [0m >>> >>>> [0;32mvalue for sshecdsakey is still nil [0m >>> >>>> architecture => x64 >>> >>>> dir => C:\Program Files (x86)\Puppet Labs\Puppet\facter >>> >>>> domain => local.currensee.com >>> >>>> env_windows_installdir => C:\Program Files (x86)\Puppet Labs\Puppet >>> >>>> facterversion => 1.6.14 >>> >>>> fqdn => mt4-mgr-qaprod.local.currensee.com >>> >>>> hardwaremodel => x64 >>> >>>> hostname => mt4-mgr-qaprod >>> >>>> id => mt4-mgr-qaprod\administrator >>> >>>> interfaces => >>> >>>> >>> Loopback_Pseudo_Interface_1,Local_Area_Connection,Teredo_Tunneling_Pseudo_Interface >>> >>> >>>> ipaddress => 192.168.5.75 >>> >>>> ipaddress6 => 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >>> >>>> ipaddress6_teredo_tunneling_pseudo_interface => >>> >>>> 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >>> >>>> ipaddress_local_area_connection => 192.168.5.75 >>> >>>> ipaddress_loopback_pseudo_interface_1 => 127.0.0.1 >>> >>>> kernel => windows >>> >>>> kernelmajversion => 6.1 >>> >>>> kernelrelease => 6.1.7600 >>> >>>> kernelversion => 6.1.7600 >>> >>>> macaddress => B8:AC:6F:B6:22:F9 >>> >>>> manufacturer => Dell Inc. >>> >>>> memoryfree => 1.98 GB >>> >>>> memorysize => 3.97 GB >>> >>>> memorytotal => 3.97 GB >>> >>>> netmask_local_area_connection => 255.255.255.0 >>> >>>> netmask_loopback_pseudo_interface_1 => 255.0.0.0 >>> >>>> network_local_area_connection => 192.168.5.0 >>> >>>> network_loopback_pseudo_interface_1 => 127.0.0.0 >>> >>>> operatingsystem => windows >>> >>>> operatingsystemrelease => 6.1.7600 >>> >>>> osfamily => windows >>> >>>> path => C:\Program Files (x86)\Puppet >>> Labs\Puppet\puppet\bin;C:\Program >>> >>>> Files (x86)\Puppet Labs\Puppet\facter\bin;C:\Program Files >>> (x86)\Puppet >>> >>>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >>> >>>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >>> >>>> Labs\Puppet\sys\tools\bin;C:\Program Files (x86)\Puppet >>> >>>> Labs\Puppet\puppet\bin;C:\Program Files (x86)\Puppet >>> >>>> Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet >>> >>>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >>> >>>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >>> >>>> >>> Labs\Puppet\sys\tools\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program >>> >>> >>>> Files\TortoiseSVN\bin;c:\Program Files\SlikSvn\bin >>> >>>> physicalprocessorcount => 1 >>> >>>> processor0 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>> >>>> processor1 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>> >>>> processor2 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>> >>>> processor3 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>> >>>> processorcount => 4 >>> >>>> productname => Vostro 230 >>> >>>> ps => tasklist.exe >>> >>>> puppetversion => 2.7.20 >>> >>>> rubysitedir => C:/Program Files (x86)/Puppet >>> >>>> Labs/Puppet/sys/ruby/lib/ruby/site_ruby/1.8 >>> >>>> rubyversion => 1.8.7 >>> >>>> serialnumber => 9CH3KM1 >>> >>>> timezone => Morocco Standard Time >>> >>>> uptime => 3 days >>> >>>> uptime_days => 3 >>> >>>> uptime_hours => 77 >>> >>>> uptime_seconds => 279298 >>> >>>> [0;32mexecuting C:\Windows\system32\arp.EXE -a [0m >>> >>>> [0;32mNot an EC2 host [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> >>>> [0;32mvalue for selinux is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux_current_mode [0m >>> >>>> [0;32mvalue for selinux_current_mode is still nil [0m >>> >>>> [0;32mexecuting C:\Windows\system32\whoami.EXE [0m >>> >>>> [0;32mexecuting uname -p [0m >>> >>>> [0;32mvalue for hardwareisa is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for lsbmajdistrelease [0m >>> >>>> [0;32mvalue for lsbmajdistrelease is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> >>>> [0;32mvalue for selinux is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 3 for swapfree [0m >>> >>>> [0;32mvalue for swapfree is still nil [0m >>> >>>> [0;32mvalue for network_teredo_tunneling_pseudo_interface is still >>> nil >>> >>>> [0m >>> >>>> [0;32mFound no suitable resolves of 1 for lsbdistid [0m >>> >>>> [0;32mvalue for lsbdistid is still nil [0m >>> >>>> [0;32mvalue for ipaddress6_local_area_connection is still nil [0m >>> >>>> [0;32mruby-augeas not available [0m >>> >>>> [0;32mvalue for augeasversion is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for arp [0m >>> >>>> [0;32mvalue for arp is still nil [0m >>> >>>> [0;32mvalue for ipaddress6_loopback_pseudo_interface_1 is still nil >>> [0m >>> >>>> [0;32mvalue for sshdsakey is still nil [0m >>> >>>> [0;32mvalue for cfkey is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for swapencrypted [0m >>> >>>> [0;32mvalue for swapencrypted is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> >>>> [0;32mvalue for selinux is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux_policyversion [0m >>> >>>> [0;32mvalue for selinux_policyversion is still nil [0m >>> >>>> [0;32mvalue for ipaddress_teredo_tunneling_pseudo_interface is >>> still nil >>> >>>> [0m >>> >>>> [0;32mexecuting C:\Windows\system32\hostname.EXE [0m >>> >>>> [0;32mFound no suitable resolves of 1 for lsbdistrelease [0m >>> >>>> [0;32mvalue for lsbdistrelease is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for >>> >>>> arp_teredo_tunneling_pseudo_interface [0m >>> >>>> [0;32mvalue for arp_teredo_tunneling_pseudo_interface is still nil >>> [0m >>> >>>> [0;32mexecuting virt-what [0m >>> >>>> [0;32mvalue for virtual is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for uniqueid [0m >>> >>>> [0;32mvalue for uniqueid is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 3 for swapsize [0m >>> >>>> [0;32mvalue for swapsize is still nil [0m >>> >>>> [0;32mvalue for mtu_teredo_tunneling_pseudo_interface is still nil >>> [0m >>> >>>> [0;32mFound no suitable resolves of 1 for netmask [0m >>> >>>> [0;32mvalue for netmask is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>> >>>> [0;32mvalue for selinux is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for selinux_enforced [0m >>> >>>> [0;32mvalue for selinux_enforced is still nil [0m >>> >>>> [0;32mvalue for mtu_local_area_connection is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for lsbdistdescription [0m >>> >>>> [0;32mvalue for lsbdistdescription is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for is_virtual [0m >>> >>>> [0;32mvalue for is_virtual is still nil [0m >>> >>>> [0;32mvalue for mtu_loopback_pseudo_interface_1 is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 1 for arp_local_area_connection >>> [0m >>> >>>> [0;32mvalue for arp_local_area_connection is still nil [0m >>> >>>> [0;32mFound no suitable resolves of 2 for iphostnumber [0m >>> >>>> [0;32mvalue for iphostnumber is still nil [0m >>> >>>> >>> >>>> >>> >>>> On Friday, December 21, 2012 2:06:22 PM UTC-5, Josh Cooper wrote: >>> >>>>> >>> >>>>> Facter is executing some command that is trying to read from >>> stdin, >>> >>>>> and is hanging. Do you happen to have cygwin or msys installed in >>> >>>>> development? >>> >>>>> >>> >>>>> To figure out which fact is causing the problem, I''d add the >>> following >>> >>>>> to C:\Program Files (x86)\Puppet >>> >>>>> Labs\Puppet\facter\util\resolution.rb, around line 133: >>> >>>>> >>> >>>>> begin >>> >>>>> Facter.debug("executing #{code}") # Add this line >>> >>>>> out = %x{#{code}}.chomp >>> >>>>> >>> >>>>> Then run: facter --debug --trace >>> >>>>> >>> >>>>> Josh >>> >>>>> >>> >>>>> On Fri, Dec 21, 2012 at 7:42 AM, phundisk <alex.f...@currensee.com> >>> >>> >>>>> wrote: >>> >>>>> > This seems to be happening in my development network but not in >>> >>>>> > production >>> >>>>> > which I guess is good. This happens when running both >>> interactively >>> >>>>> > and via >>> >>>>> > the automatic service run. This is happening on multiple >>> servers. >>> >>>>> > Have >>> >>>>> > already tried to uninstall and reinstall. >>> >>>>> > >>> >>>>> > Windows Puppet Agent: 2.7.20 >>> >>>>> > >>> >>>>> > When I run it interactively I can see the problem. I issue the >>> >>>>> > command >>> >>>>> > ''puppet agent --test --noop'' but it also happens with running >>> the >>> >>>>> > regular >>> >>>>> > puppet command. >>> >>>>> > Puppet will hang after it loads facts. It will stay this was >>> until I >>> >>>>> > press >>> >>>>> > enter. (see screenshot 1st.png) It will stay this way forever >>> until >>> >>>>> > I >>> >>>>> > press enter. >>> >>>>> > >>> >>>>> > Upon pressing enter, I receive a message Resolution.exec with a >>> shell >>> >>>>> > built-in is deprecated. (See screenshot 2nd.png) >>> >>>>> > >>> >>>>> > Anyone have any ideas on how to resolve this? >>> >>>>> > >>> >>>>> > _____________________________________________________ >>> >>>>> > This email and any files transmitted with it are confidential >>> and >>> >>>>> > intended >>> >>>>> > solely for the addressee. If you received this email in error, >>> >>>>> > please do >>> >>>>> > not disclose the contents to anyone; kindly notify the sender by >>> >>>>> > return >>> >>>>> > email and delete this email and any attachments from your >>> system. >>> >>>>> > >>> >>>>> > © 2011 Currensee Inc. is a member of the National Futures >>> Association >>> >>>>> > (NFA) >>> >>>>> > Member ID 0403251 | Over the counter retail foreign currency >>> (Forex) >>> >>>>> > trading >>> >>>>> > may involve significant risk of loss. It is not suitable for all >>> >>>>> > investors >>> >>>>> > and you should make sure you understand the risks involved >>> before >>> >>>>> > trading >>> >>>>> > and seek independent advice if necessary. Performance, >>> strategies and >>> >>>>> > charts >>> >>>>> > shown are not necessarily predictive of any particular result >>> and >>> >>>>> > past >>> >>>>> > performance is no indication of future results. Investor returns >>> may >>> >>>>> > vary >>> >>>>> > from Trade Leader returns based on slippage, fees, broker >>> spreads, >>> >>>>> > volatility or other market conditions. >>> >>>>> > >>> >>>>> > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>> >>>>> > +1.617.624.3824 >>> >>>>> > >>> >>>>> > -- >>> >>>>> > You received this message because you are subscribed to the >>> Google >>> >>>>> > Groups >>> >>>>> > "Puppet Users" group. >>> >>>>> > To view this discussion on the web visit >>> >>>>> > https://groups.google.com/d/msg/puppet-users/-/TacX5LerBLUJ. >>> >>>>> > To post to this group, send email to puppet...@googlegroups.com. >>> >>> >>>>> > To unsubscribe from this group, send email to >>> >>>>> > puppet-users...@googlegroups.com. >>> >>>>> > For more options, visit this group at >>> >>>>> > http://groups.google.com/group/puppet-users?hl=en. >>> >>>>> >>> >>>>> >>> >>>>> >>> >>>>> -- >>> >>>>> Josh Cooper >>> >>>>> Developer, Puppet Labs >>> >>>> >>> >>>> >>> >>>> _____________________________________________________ >>> >>>> This email and any files transmitted with it are confidential and >>> >>>> intended solely for the addressee. If you received this email in >>> error, >>> >>>> please do not disclose the contents to anyone; kindly notify the >>> sender by >>> >>>> return email and delete this email and any attachments from your >>> system. >>> >>>> >>> >>>> © 2011 Currensee Inc. is a member of the National Futures >>> Association >>> >>>> (NFA) Member ID 0403251 | Over the counter retail foreign currency >>> (Forex) >>> >>>> trading may involve significant risk of loss. It is not suitable >>> for all >>> >>>> investors and you should make sure you understand the risks >>> involved before >>> >>>> trading and seek independent advice if necessary. Performance, >>> strategies >>> >>>> and charts shown are not necessarily predictive of any particular >>> result and >>> >>>> past performance is no indication of future results. Investor >>> returns may >>> >>>> vary from Trade Leader returns based on slippage, fees, broker >>> spreads, >>> >>>> volatility or other market conditions. >>> >>>> >>> >>>> Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>> >>>> +1.617.624.3824 >>> >> >>> >> >>> >> >>> >> Can you try removing ''c:\Program Files\TortoiseSVN\bin;c:\Program >>> >> Files\SlikSvn\bin'' from your PATH >>> >> >>> >> Josh >>> > >>> > >>> > _____________________________________________________ >>> > This email and any files transmitted with it are confidential and >>> intended >>> > solely for the addressee. If you received this email in error, please >>> do >>> > not disclose the contents to anyone; kindly notify the sender by >>> return >>> > email and delete this email and any attachments from your system. >>> > >>> > © 2011 Currensee Inc. is a member of the National Futures Association >>> (NFA) >>> > Member ID 0403251 | Over the counter retail foreign currency (Forex) >>> trading >>> > may involve significant risk of loss. It is not suitable for all >>> investors >>> > and you should make sure you understand the risks involved before >>> trading >>> > and seek independent advice if necessary. Performance, strategies and >>> charts >>> > shown are not necessarily predictive of any particular result and past >>> > performance is no indication of future results. Investor returns may >>> vary >>> > from Trade Leader returns based on slippage, fees, broker spreads, >>> > volatility or other market conditions. >>> > >>> > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>> +1.617.624.3824 >>> > >>> > -- >>> > You received this message because you are subscribed to the Google >>> Groups >>> > "Puppet Users" group. >>> > To view this discussion on the web visit >>> > https://groups.google.com/d/msg/puppet-users/-/piHpC7JLxLgJ. >>> > >>> > To post to this group, send email to puppet...@googlegroups.com. >>> > To unsubscribe from this group, send email to >>> > puppet-users...@googlegroups.com. >>> > For more options, visit this group at >>> > http://groups.google.com/group/puppet-users?hl=en. >>> >>> >>> >>> -- >>> Josh Cooper >>> Developer, Puppet Labs >>> >> >> _____________________________________________________ >> This email and any files transmitted with it are confidential and >> intended solely for the addressee. If you received this email in error, >> please do not disclose the contents to anyone; kindly notify the sender by >> return email and delete this email and any attachments from your system. >> >> © 2011 Currensee Inc. is a member of the National Futures Association >> (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) >> trading may involve significant risk of loss. It is not suitable for all >> investors and you should make sure you understand the risks involved before >> trading and seek independent advice if necessary. Performance, strategies >> and charts shown are not necessarily predictive of any particular result >> and past performance is no indication of future results. Investor returns >> may vary from Trade Leader returns based on slippage, fees, broker spreads, >> volatility or other market conditions. >> >> Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824 >> > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/puppet-users/-/GSMomEglm4sJ. > To post to this group, send email to puppet...@googlegroups.com<javascript:> > . > To unsubscribe from this group, send email to > puppet-users...@googlegroups.com <javascript:>. > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. > >-- _____________________________________________________ This email and any files transmitted with it are confidential and intended solely for the addressee. If you received this email in error, please do not disclose the contents to anyone; kindly notify the sender by return email and delete this email and any attachments from your system. © 2011 Currensee Inc. is a member of the National Futures Association (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) trading may involve significant risk of loss. It is not suitable for all investors and you should make sure you understand the risks involved before trading and seek independent advice if necessary. Performance, strategies and charts shown are not necessarily predictive of any particular result and past performance is no indication of future results. Investor returns may vary from Trade Leader returns based on slippage, fees, broker spreads, volatility or other market conditions. Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824 -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/sIl4KNTCFYEJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Alessandro Franceschi
2013-Jan-14 17:18 UTC
Re: [Puppet Users] Windows Puppet Agent Hangs on Run
Issue should have been fixed now. Thanks for the github bug report. On Monday, January 14, 2013 3:47:38 PM UTC+1, phundisk wrote:> > Thank you for the information! That resolved the issue. I have posted a > bug report on puppi''s github > https://github.com/example42/puppi/issues/45 > > On Saturday, January 12, 2013 4:01:49 PM UTC-5, Josh Cooper wrote: >> >> That module contains a last_run fact that executes ''date'', which on >> windows will prompt for a new date to be entered and hang, instead of >> displaying the current date. >> >> Josh >> >> On Jan 12, 2013, at 2:33 AM, Matt Purvis <ma...@purvis.co.nz> wrote: >> >> Hi Alex, >> >> I''m having the same problem as you with Puppet Enterprise 2.7.19 on >> Windows SBS 2008. >> >> I''ve tracked down the cause of the problem to the example42/puppi module. >> Try running the following on your puppetmaster and then do a Puppet run on >> your Windows box and see if the problem persists: >> >> puppet module uninstall --force example42/puppi >> >> Removing puppi worked for me. If you''re using any of the example42 >> module then you might be able to fix this behaviour in puppi by editing >> "modules/puppi/lib/facter/puppi_projects.rb" on your puppetmaster. >> >> I haven''t submitted a bug report on puppi yet so feel free to do so. >> >> Cheers, >> >> Matt >> >> >> On Wednesday, January 9, 2013 4:43:44 AM UTC+13, phundisk wrote: >>> >>> I tried the following config changes in stdlib (version v3.1.1) but it >>> is still handing until I press enter during the puppet run. I was thinking >>> about trying any of the following... >>> >>> Upgrading Ruby on the Windows machine >>> Point the windows machine to another puppet server >>> Run puppet via scheduled task command and or command line (if that >>> produces no problems) >>> Change version of STDLIB? >>> >>> >>> "modules/stdlib/spec/unit/facter/root_home_spec.rb" >>> context "windows" do >>> #before :each do >>> # Facter::Util::Resolution.expects(:exec).with("getent passwd >>> root").returns(nil) >>> #end >>> #it "should be nil on windows" do >>> # Facter::Util::RootHome.get_root_home.should be_nil >>> #end >>> end >>> >>> >>> modules/stdlib/lib/facter/root_home.rb >>> >>> module Facter::Util::RootHome >>> class << self >>> def get_root_home >>> # root_ent = Facter::Util::Resolution.exec("getent passwd root") >>> # The home directory is the sixth element in the passwd entry >>> # If the platform doesn''t have getent, root_ent will be nil and we >>> should >>> # return it straight away. >>> # root_ent && root_ent.split(":")[5] >>> end >>> end >>> end >>> >>> #Facter.add(:root_home) do >>> # setcode { Facter::Util::RootHome.get_root_home } >>> # end >>> >>> On Monday, January 7, 2013 12:51:25 PM UTC-5, Josh Cooper wrote: >>>> >>>> Hi Alex, >>>> >>>> On Mon, Jan 7, 2013 at 7:56 AM, phundisk <alex.f...@currensee.com> >>>> wrote: >>>> > I removed these from my path and restarted. When running puppet it >>>> still >>>> > seems to hang. I tried to comment out the section in root_home.rb >>>> that >>>> > facter seems to be hanging on but the file was overwritten when >>>> attempting >>>> > to run puppet again. >>>> >>>> Ah, the root_home fact is part of the puppetlabs stdlib module. When >>>> you run facter, only facts that are part of facter itself are >>>> evaluated. >>>> >>>> But, when you run puppet, it runs facter, but tells it load facts from >>>> additional directories, e.g. from modules'' facter directories. >>>> >>>> The stdlib module is updated each time the agent does a pluginsync, >>>> which is why your edits are getting overwritten. >>>> >>>> > Is there an update to this file or facter itself? >>>> >>>> The root_home fact calls `getent passwd root`, can you try executing >>>> that from the command line? >>>> >>>> Also, on the master, you might try editing the fact root_home.rb in >>>> the stdlib module, e.g. >>>> /etc/puppet/modules/stdlib/lib/facter/root_home.rb. Either to skip the >>>> exec on windows: >>>> >>>> require ''facter/util/config'' >>>> unless Facter::Util::Config.is_windows? >>>> root_ent = Facter::Util::Resolution.exec("getent passwd root") >>>> ... >>>> end >>>> >>>> Or add another fact for root_home confined to windows: >>>> >>>> Facter.add("root_home") do >>>> confine :kernel => :windows >>>> setcode do >>>> "#{ENV[''SYSTEMDRIVE'']}/Users/Administrator" >>>> end >>>> end >>>> >>>> > Currently the package installed is >>>> > https://downloads.puppetlabs.com/windows/puppet-2.7.20.msi >>>> > >>>> > >>>> > On Friday, January 4, 2013 6:57:58 PM UTC-5, Josh Cooper wrote: >>>> >> >>>> >> On Friday, January 4, 2013 11:01:00 AM UTC-8, phundisk wrote: >>>> >>> >>>> >>> Can anyone make sense of the output below? I am still experiencing >>>> this >>>> >>> error. Does this require any configuration change on the puppet >>>> server? >>>> >>> >>>> >>> On Friday, December 21, 2012 4:45:30 PM UTC-5, phundisk wrote: >>>> >>>> >>>> >>>> Hi Josh! >>>> >>>> >>>> >>>> Making the changes and running the command I got the following... >>>> (I >>>> >>>> made the change in C:\Program Files (x86)\Puppet >>>> >>>> Labs\Puppet\facter\lib\facter\util\ as that was the only >>>> resolution.rb I >>>> >>>> could find) We do not use cygwin or msys on this system. >>>> >>>> >>>> >>>> [0;32mFound no suitable resolves of 1 for xendomains [0m >>>> >>>> [0;32mvalue for xendomains is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> >>>> [0;32mvalue for selinux is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux_mode [0m >>>> >>>> [0;32mvalue for selinux_mode is still nil [0m >>>> >>>> [0;32mvalue for netmask_teredo_tunneling_pseudo_interface is still >>>> nil >>>> >>>> [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for vlans [0m >>>> >>>> [0;32mvalue for vlans is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> >>>> [0;32mvalue for selinux is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux_config_policy >>>> [0m >>>> >>>> [0;32mvalue for selinux_config_policy is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for lsbdistcodename [0m >>>> >>>> [0;32mvalue for lsbdistcodename is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for >>>> >>>> arp_loopback_pseudo_interface_1 [0m >>>> >>>> [0;32mvalue for arp_loopback_pseudo_interface_1 is still nil [0m >>>> >>>> [0;32mvalue for sshrsakey is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> >>>> [0;32mvalue for selinux is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux_config_mode [0m >>>> >>>> [0;32mvalue for selinux_config_mode is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 2 for processor [0m >>>> >>>> [0;32mvalue for processor is still nil [0m >>>> >>>> [0;32mexecuting C:\Windows/system32/netsh.exe interface ipv6 show >>>> >>>> address level=verbose [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for lsbrelease [0m >>>> >>>> [0;32mvalue for lsbrelease is still nil [0m >>>> >>>> [0;32mvalue for macaddress_teredo_tunneling_pseudo_interface is >>>> still >>>> >>>> nil [0m >>>> >>>> [0;32mvalue for macaddress_local_area_connection is still nil [0m >>>> >>>> [0;32mvalue for macaddress_loopback_pseudo_interface_1 is still >>>> nil [0m >>>> >>>> [0;32mvalue for sshecdsakey is still nil [0m >>>> >>>> architecture => x64 >>>> >>>> dir => C:\Program Files (x86)\Puppet Labs\Puppet\facter >>>> >>>> domain => local.currensee.com >>>> >>>> env_windows_installdir => C:\Program Files (x86)\Puppet >>>> Labs\Puppet >>>> >>>> facterversion => 1.6.14 >>>> >>>> fqdn => mt4-mgr-qaprod.local.currensee.com >>>> >>>> hardwaremodel => x64 >>>> >>>> hostname => mt4-mgr-qaprod >>>> >>>> id => mt4-mgr-qaprod\administrator >>>> >>>> interfaces => >>>> >>>> >>>> Loopback_Pseudo_Interface_1,Local_Area_Connection,Teredo_Tunneling_Pseudo_Interface >>>> >>>> >>>> ipaddress => 192.168.5.75 >>>> >>>> ipaddress6 => 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >>>> >>>> ipaddress6_teredo_tunneling_pseudo_interface => >>>> >>>> 2001:0:9d38:6ab8:3d:37bb:3f57:fab4 >>>> >>>> ipaddress_local_area_connection => 192.168.5.75 >>>> >>>> ipaddress_loopback_pseudo_interface_1 => 127.0.0.1 >>>> >>>> kernel => windows >>>> >>>> kernelmajversion => 6.1 >>>> >>>> kernelrelease => 6.1.7600 >>>> >>>> kernelversion => 6.1.7600 >>>> >>>> macaddress => B8:AC:6F:B6:22:F9 >>>> >>>> manufacturer => Dell Inc. >>>> >>>> memoryfree => 1.98 GB >>>> >>>> memorysize => 3.97 GB >>>> >>>> memorytotal => 3.97 GB >>>> >>>> netmask_local_area_connection => 255.255.255.0 >>>> >>>> netmask_loopback_pseudo_interface_1 => 255.0.0.0 >>>> >>>> network_local_area_connection => 192.168.5.0 >>>> >>>> network_loopback_pseudo_interface_1 => 127.0.0.0 >>>> >>>> operatingsystem => windows >>>> >>>> operatingsystemrelease => 6.1.7600 >>>> >>>> osfamily => windows >>>> >>>> path => C:\Program Files (x86)\Puppet >>>> Labs\Puppet\puppet\bin;C:\Program >>>> >>>> Files (x86)\Puppet Labs\Puppet\facter\bin;C:\Program Files >>>> (x86)\Puppet >>>> >>>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >>>> >>>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >>>> >>>> Labs\Puppet\sys\tools\bin;C:\Program Files (x86)\Puppet >>>> >>>> Labs\Puppet\puppet\bin;C:\Program Files (x86)\Puppet >>>> >>>> Labs\Puppet\facter\bin;C:\Program Files (x86)\Puppet >>>> >>>> Labs\Puppet\bin;C:\Program Files (x86)\Puppet >>>> >>>> Labs\Puppet\sys\ruby\bin;C:\Program Files (x86)\Puppet >>>> >>>> >>>> Labs\Puppet\sys\tools\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program >>>> >>>> >>>> Files\TortoiseSVN\bin;c:\Program Files\SlikSvn\bin >>>> >>>> physicalprocessorcount => 1 >>>> >>>> processor0 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>>> >>>> processor1 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>>> >>>> processor2 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>>> >>>> processor3 => Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz >>>> >>>> processorcount => 4 >>>> >>>> productname => Vostro 230 >>>> >>>> ps => tasklist.exe >>>> >>>> puppetversion => 2.7.20 >>>> >>>> rubysitedir => C:/Program Files (x86)/Puppet >>>> >>>> Labs/Puppet/sys/ruby/lib/ruby/site_ruby/1.8 >>>> >>>> rubyversion => 1.8.7 >>>> >>>> serialnumber => 9CH3KM1 >>>> >>>> timezone => Morocco Standard Time >>>> >>>> uptime => 3 days >>>> >>>> uptime_days => 3 >>>> >>>> uptime_hours => 77 >>>> >>>> uptime_seconds => 279298 >>>> >>>> [0;32mexecuting C:\Windows\system32\arp.EXE -a [0m >>>> >>>> [0;32mNot an EC2 host [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> >>>> [0;32mvalue for selinux is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux_current_mode [0m >>>> >>>> [0;32mvalue for selinux_current_mode is still nil [0m >>>> >>>> [0;32mexecuting C:\Windows\system32\whoami.EXE [0m >>>> >>>> [0;32mexecuting uname -p [0m >>>> >>>> [0;32mvalue for hardwareisa is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for lsbmajdistrelease [0m >>>> >>>> [0;32mvalue for lsbmajdistrelease is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> >>>> [0;32mvalue for selinux is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 3 for swapfree [0m >>>> >>>> [0;32mvalue for swapfree is still nil [0m >>>> >>>> [0;32mvalue for network_teredo_tunneling_pseudo_interface is still >>>> nil >>>> >>>> [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for lsbdistid [0m >>>> >>>> [0;32mvalue for lsbdistid is still nil [0m >>>> >>>> [0;32mvalue for ipaddress6_local_area_connection is still nil [0m >>>> >>>> [0;32mruby-augeas not available [0m >>>> >>>> [0;32mvalue for augeasversion is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for arp [0m >>>> >>>> [0;32mvalue for arp is still nil [0m >>>> >>>> [0;32mvalue for ipaddress6_loopback_pseudo_interface_1 is still >>>> nil [0m >>>> >>>> [0;32mvalue for sshdsakey is still nil [0m >>>> >>>> [0;32mvalue for cfkey is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for swapencrypted [0m >>>> >>>> [0;32mvalue for swapencrypted is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> >>>> [0;32mvalue for selinux is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux_policyversion >>>> [0m >>>> >>>> [0;32mvalue for selinux_policyversion is still nil [0m >>>> >>>> [0;32mvalue for ipaddress_teredo_tunneling_pseudo_interface is >>>> still nil >>>> >>>> [0m >>>> >>>> [0;32mexecuting C:\Windows\system32\hostname.EXE [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for lsbdistrelease [0m >>>> >>>> [0;32mvalue for lsbdistrelease is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for >>>> >>>> arp_teredo_tunneling_pseudo_interface [0m >>>> >>>> [0;32mvalue for arp_teredo_tunneling_pseudo_interface is still nil >>>> [0m >>>> >>>> [0;32mexecuting virt-what [0m >>>> >>>> [0;32mvalue for virtual is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for uniqueid [0m >>>> >>>> [0;32mvalue for uniqueid is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 3 for swapsize [0m >>>> >>>> [0;32mvalue for swapsize is still nil [0m >>>> >>>> [0;32mvalue for mtu_teredo_tunneling_pseudo_interface is still nil >>>> [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for netmask [0m >>>> >>>> [0;32mvalue for netmask is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux [0m >>>> >>>> [0;32mvalue for selinux is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for selinux_enforced [0m >>>> >>>> [0;32mvalue for selinux_enforced is still nil [0m >>>> >>>> [0;32mvalue for mtu_local_area_connection is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for lsbdistdescription [0m >>>> >>>> [0;32mvalue for lsbdistdescription is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for is_virtual [0m >>>> >>>> [0;32mvalue for is_virtual is still nil [0m >>>> >>>> [0;32mvalue for mtu_loopback_pseudo_interface_1 is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 1 for >>>> arp_local_area_connection [0m >>>> >>>> [0;32mvalue for arp_local_area_connection is still nil [0m >>>> >>>> [0;32mFound no suitable resolves of 2 for iphostnumber [0m >>>> >>>> [0;32mvalue for iphostnumber is still nil [0m >>>> >>>> >>>> >>>> >>>> >>>> On Friday, December 21, 2012 2:06:22 PM UTC-5, Josh Cooper wrote: >>>> >>>>> >>>> >>>>> Facter is executing some command that is trying to read from >>>> stdin, >>>> >>>>> and is hanging. Do you happen to have cygwin or msys installed in >>>> >>>>> development? >>>> >>>>> >>>> >>>>> To figure out which fact is causing the problem, I''d add the >>>> following >>>> >>>>> to C:\Program Files (x86)\Puppet >>>> >>>>> Labs\Puppet\facter\util\resolution.rb, around line 133: >>>> >>>>> >>>> >>>>> begin >>>> >>>>> Facter.debug("executing #{code}") # Add this line >>>> >>>>> out = %x{#{code}}.chomp >>>> >>>>> >>>> >>>>> Then run: facter --debug --trace >>>> >>>>> >>>> >>>>> Josh >>>> >>>>> >>>> >>>>> On Fri, Dec 21, 2012 at 7:42 AM, phundisk < >>>> alex.f...@currensee.com> >>>> >>>>> wrote: >>>> >>>>> > This seems to be happening in my development network but not in >>>> >>>>> > production >>>> >>>>> > which I guess is good. This happens when running both >>>> interactively >>>> >>>>> > and via >>>> >>>>> > the automatic service run. This is happening on multiple >>>> servers. >>>> >>>>> > Have >>>> >>>>> > already tried to uninstall and reinstall. >>>> >>>>> > >>>> >>>>> > Windows Puppet Agent: 2.7.20 >>>> >>>>> > >>>> >>>>> > When I run it interactively I can see the problem. I issue the >>>> >>>>> > command >>>> >>>>> > ''puppet agent --test --noop'' but it also happens with running >>>> the >>>> >>>>> > regular >>>> >>>>> > puppet command. >>>> >>>>> > Puppet will hang after it loads facts. It will stay this was >>>> until I >>>> >>>>> > press >>>> >>>>> > enter. (see screenshot 1st.png) It will stay this way forever >>>> until >>>> >>>>> > I >>>> >>>>> > press enter. >>>> >>>>> > >>>> >>>>> > Upon pressing enter, I receive a message Resolution.exec with a >>>> shell >>>> >>>>> > built-in is deprecated. (See screenshot 2nd.png) >>>> >>>>> > >>>> >>>>> > Anyone have any ideas on how to resolve this? >>>> >>>>> > >>>> >>>>> > _____________________________________________________ >>>> >>>>> > This email and any files transmitted with it are confidential >>>> and >>>> >>>>> > intended >>>> >>>>> > solely for the addressee. If you received this email in error, >>>> >>>>> > please do >>>> >>>>> > not disclose the contents to anyone; kindly notify the sender >>>> by >>>> >>>>> > return >>>> >>>>> > email and delete this email and any attachments from your >>>> system. >>>> >>>>> > >>>> >>>>> > © 2011 Currensee Inc. is a member of the National Futures >>>> Association >>>> >>>>> > (NFA) >>>> >>>>> > Member ID 0403251 | Over the counter retail foreign currency >>>> (Forex) >>>> >>>>> > trading >>>> >>>>> > may involve significant risk of loss. It is not suitable for >>>> all >>>> >>>>> > investors >>>> >>>>> > and you should make sure you understand the risks involved >>>> before >>>> >>>>> > trading >>>> >>>>> > and seek independent advice if necessary. Performance, >>>> strategies and >>>> >>>>> > charts >>>> >>>>> > shown are not necessarily predictive of any particular result >>>> and >>>> >>>>> > past >>>> >>>>> > performance is no indication of future results. Investor >>>> returns may >>>> >>>>> > vary >>>> >>>>> > from Trade Leader returns based on slippage, fees, broker >>>> spreads, >>>> >>>>> > volatility or other market conditions. >>>> >>>>> > >>>> >>>>> > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>>> >>>>> > +1.617.624.3824 >>>> >>>>> > >>>> >>>>> > -- >>>> >>>>> > You received this message because you are subscribed to the >>>> Google >>>> >>>>> > Groups >>>> >>>>> > "Puppet Users" group. >>>> >>>>> > To view this discussion on the web visit >>>> >>>>> > https://groups.google.com/d/msg/puppet-users/-/TacX5LerBLUJ. >>>> >>>>> > To post to this group, send email to puppet...@googlegroups.com. >>>> >>>> >>>>> > To unsubscribe from this group, send email to >>>> >>>>> > puppet-users...@googlegroups.com. >>>> >>>>> > For more options, visit this group at >>>> >>>>> > http://groups.google.com/group/puppet-users?hl=en. >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> -- >>>> >>>>> Josh Cooper >>>> >>>>> Developer, Puppet Labs >>>> >>>> >>>> >>>> >>>> >>>> _____________________________________________________ >>>> >>>> This email and any files transmitted with it are confidential and >>>> >>>> intended solely for the addressee. If you received this email in >>>> error, >>>> >>>> please do not disclose the contents to anyone; kindly notify the >>>> sender by >>>> >>>> return email and delete this email and any attachments from your >>>> system. >>>> >>>> >>>> >>>> © 2011 Currensee Inc. is a member of the National Futures >>>> Association >>>> >>>> (NFA) Member ID 0403251 | Over the counter retail foreign currency >>>> (Forex) >>>> >>>> trading may involve significant risk of loss. It is not suitable >>>> for all >>>> >>>> investors and you should make sure you understand the risks >>>> involved before >>>> >>>> trading and seek independent advice if necessary. Performance, >>>> strategies >>>> >>>> and charts shown are not necessarily predictive of any particular >>>> result and >>>> >>>> past performance is no indication of future results. Investor >>>> returns may >>>> >>>> vary from Trade Leader returns based on slippage, fees, broker >>>> spreads, >>>> >>>> volatility or other market conditions. >>>> >>>> >>>> >>>> Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>>> >>>> +1.617.624.3824 >>>> >> >>>> >> >>>> >> >>>> >> Can you try removing ''c:\Program Files\TortoiseSVN\bin;c:\Program >>>> >> Files\SlikSvn\bin'' from your PATH >>>> >> >>>> >> Josh >>>> > >>>> > >>>> > _____________________________________________________ >>>> > This email and any files transmitted with it are confidential and >>>> intended >>>> > solely for the addressee. If you received this email in error, >>>> please do >>>> > not disclose the contents to anyone; kindly notify the sender by >>>> return >>>> > email and delete this email and any attachments from your system. >>>> > >>>> > © 2011 Currensee Inc. is a member of the National Futures Association >>>> (NFA) >>>> > Member ID 0403251 | Over the counter retail foreign currency (Forex) >>>> trading >>>> > may involve significant risk of loss. It is not suitable for all >>>> investors >>>> > and you should make sure you understand the risks involved before >>>> trading >>>> > and seek independent advice if necessary. Performance, strategies and >>>> charts >>>> > shown are not necessarily predictive of any particular result and >>>> past >>>> > performance is no indication of future results. Investor returns may >>>> vary >>>> > from Trade Leader returns based on slippage, fees, broker spreads, >>>> > volatility or other market conditions. >>>> > >>>> > Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>>> +1.617.624.3824 >>>> > >>>> > -- >>>> > You received this message because you are subscribed to the Google >>>> Groups >>>> > "Puppet Users" group. >>>> > To view this discussion on the web visit >>>> > https://groups.google.com/d/msg/puppet-users/-/piHpC7JLxLgJ. >>>> > >>>> > To post to this group, send email to puppet...@googlegroups.com. >>>> > To unsubscribe from this group, send email to >>>> > puppet-users...@googlegroups.com. >>>> > For more options, visit this group at >>>> > http://groups.google.com/group/puppet-users?hl=en. >>>> >>>> >>>> >>>> -- >>>> Josh Cooper >>>> Developer, Puppet Labs >>>> >>> >>> _____________________________________________________ >>> This email and any files transmitted with it are confidential and >>> intended solely for the addressee. If you received this email in error, >>> please do not disclose the contents to anyone; kindly notify the sender by >>> return email and delete this email and any attachments from your system. >>> >>> © 2011 Currensee Inc. is a member of the National Futures Association >>> (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) >>> trading may involve significant risk of loss. It is not suitable for all >>> investors and you should make sure you understand the risks involved before >>> trading and seek independent advice if necessary. Performance, strategies >>> and charts shown are not necessarily predictive of any particular result >>> and past performance is no indication of future results. Investor returns >>> may vary from Trade Leader returns based on slippage, fees, broker spreads, >>> volatility or other market conditions. >>> >>> Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | >>> +1.617.624.3824 >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Puppet Users" group. >> To view this discussion on the web visit >> https://groups.google.com/d/msg/puppet-users/-/GSMomEglm4sJ. >> To post to this group, send email to puppet...@googlegroups.com. >> To unsubscribe from this group, send email to >> puppet-users...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/puppet-users?hl=en. >> >>-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/UoBa7B5rRdoJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.