I''ve got a 3.0.0 node on Ubuntu 12.04 talking to a 2.7.19 master on Ubuntu 10.04. Until yesterday, this worked fine (and the other 3.0.0 node works fine as well) This node is in my ''test'' environment and the other node uses an almost identical node def except is in the ''prod'' environment. I don''t know exactly what changed, but I am hoping someone can help me track this down. Of the two nodes, I did move the one that is still functioning normally out of test and into prod, but other than hostnames and environments, they use the same code base and settings. I''ve posted a partial log (sudo puppet agent -t --debug) from the node having problems at https://gist.github.com/4001797 But the basic issue is that puppet runs have started taking 15-20 minutes, and in each case, the long pause is after Debug: /Schedule[puppet]: Skipping device resources because running on a host Debug: file_metadata supports formats: b64_zlib_yaml pson raw yaml; using pson Debug: file_metadata supports formats: b64_zlib_yaml pson raw yaml; using pson is displayed. I commented out a section of the node def to simplify, and same issues. Any help in tracking this down would be much appreciated. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/LujOOcI8uQMJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Turns out it was a stray recurse => true On Friday, November 2, 2012 9:56:40 AM UTC-5, llowder wrote:> > I''ve got a 3.0.0 node on Ubuntu 12.04 talking to a 2.7.19 master on Ubuntu > 10.04. Until yesterday, this worked fine (and the other 3.0.0 node works > fine as well) > > This node is in my ''test'' environment and the other node uses an almost > identical node def except is in the ''prod'' environment. > > I don''t know exactly what changed, but I am hoping someone can help me > track this down. > > Of the two nodes, I did move the one that is still functioning normally > out of test and into prod, but other than hostnames and environments, they > use the same code base and settings. > > I''ve posted a partial log (sudo puppet agent -t --debug) from the node > having problems at https://gist.github.com/4001797 > > But the basic issue is that puppet runs have started taking 15-20 minutes, > and in each case, the long pause is after > > Debug: /Schedule[puppet]: Skipping device resources because running on a > host > Debug: file_metadata supports formats: b64_zlib_yaml pson raw yaml; using > pson > Debug: file_metadata supports formats: b64_zlib_yaml pson raw yaml; using > pson > > is displayed. > > I commented out a section of the node def to simplify, and same issues. > > Any help in tracking this down would be much appreciated. >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/WtV8zCBVI1YJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
> > I''ve got a 3.0.0 node on Ubuntu 12.04 talking to a 2.7.19 master on Ubuntu > 10.04.Stop. That is not supported. Master must be newer or equal to client. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/sBKj-WfdTwIJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
On Friday, November 2, 2012 1:10:37 PM UTC-5, nikolavp wrote:> > Is there any particular reason that you are using an older master than > the client. If not now it will pop up as a problem in the future. Why > don''t you just make the move? > >2 of my nodes got provisioned wrong. I am ready to upgrade my master and the rest of my nodes, but corporate policy will not allow me to at this point in time. As it currently stands, 3.0.0 client talking to a 2.7.19 master is relatively safe. The issue I was having was unrelated to the versions being used. I am well aware of the potential problems when a client is newer than a master, and I do not plan on running this way any longer than I have to.> Best, Nikola > > On Fri, Nov 02, 2012 at 08:28:12AM -0700, llowder wrote: > > Turns out it was a stray recurse => true > > > > On Friday, November 2, 2012 9:56:40 AM UTC-5, llowder wrote: > > > > > > I''ve got a 3.0.0 node on Ubuntu 12.04 talking to a 2.7.19 master on > Ubuntu > > > 10.04. Until yesterday, this worked fine (and the other 3.0.0 node > works > > > fine as well) > > > > > > This node is in my ''test'' environment and the other node uses an > almost > > > identical node def except is in the ''prod'' environment. > > > > > > I don''t know exactly what changed, but I am hoping someone can help me > > > track this down. > > > > > > Of the two nodes, I did move the one that is still functioning > normally > > > out of test and into prod, but other than hostnames and environments, > they > > > use the same code base and settings. > > > > > > I''ve posted a partial log (sudo puppet agent -t --debug) from the node > > > having problems at https://gist.github.com/4001797 > > > > > > But the basic issue is that puppet runs have started taking 15-20 > minutes, > > > and in each case, the long pause is after > > > > > > Debug: /Schedule[puppet]: Skipping device resources because running on > a > > > host > > > Debug: file_metadata supports formats: b64_zlib_yaml pson raw yaml; > using > > > pson > > > Debug: file_metadata supports formats: b64_zlib_yaml pson raw yaml; > using > > > pson > > > > > > is displayed. > > > > > > I commented out a section of the node def to simplify, and same > issues. > > > > > > Any help in tracking this down would be much appreciated. > > > > > > > -- > > You received this message because you are subscribed to the Google > Groups "Puppet Users" group. > > To view this discussion on the web visit > https://groups.google.com/d/msg/puppet-users/-/WtV8zCBVI1YJ. > > To post to this group, send email to puppet...@googlegroups.com<javascript:>. > > > To unsubscribe from this group, send email to > puppet-users...@googlegroups.com <javascript:>. > > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. > > >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/NNSHa0-HkNQJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Is there any particular reason that you are using an older master than the client. If not now it will pop up as a problem in the future. Why don''t you just make the move? Best, Nikola On Fri, Nov 02, 2012 at 08:28:12AM -0700, llowder wrote:> Turns out it was a stray recurse => true > > On Friday, November 2, 2012 9:56:40 AM UTC-5, llowder wrote: > > > > I''ve got a 3.0.0 node on Ubuntu 12.04 talking to a 2.7.19 master on Ubuntu > > 10.04. Until yesterday, this worked fine (and the other 3.0.0 node works > > fine as well) > > > > This node is in my ''test'' environment and the other node uses an almost > > identical node def except is in the ''prod'' environment. > > > > I don''t know exactly what changed, but I am hoping someone can help me > > track this down. > > > > Of the two nodes, I did move the one that is still functioning normally > > out of test and into prod, but other than hostnames and environments, they > > use the same code base and settings. > > > > I''ve posted a partial log (sudo puppet agent -t --debug) from the node > > having problems at https://gist.github.com/4001797 > > > > But the basic issue is that puppet runs have started taking 15-20 minutes, > > and in each case, the long pause is after > > > > Debug: /Schedule[puppet]: Skipping device resources because running on a > > host > > Debug: file_metadata supports formats: b64_zlib_yaml pson raw yaml; using > > pson > > Debug: file_metadata supports formats: b64_zlib_yaml pson raw yaml; using > > pson > > > > is displayed. > > > > I commented out a section of the node def to simplify, and same issues. > > > > Any help in tracking this down would be much appreciated. > > > > -- > You received this message because you are subscribed to the Google Groups "Puppet Users" group. > To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/WtV8zCBVI1YJ. > To post to this group, send email to puppet-users@googlegroups.com. > To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. > For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en. >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.