Team, I need a puppet module to copy a file to different location based on condition check . Below is my requirement if /opt/path1 found on the server then copy file1 if /opt/path2 found on the server then copy file1 if /opt/path3 found on the server then copy file1 if none of the above path found then dont copy file1 Thanks, Jeeva -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Team, Any help Thanks, Jeeva On Fri, Mar 30, 2012 at 12:51 PM, Munna S <19.munna@gmail.com> wrote:> Team, > > I need a puppet module to copy a file to different location based on > condition check . Below is my requirement > > if /opt/path1 found on the server then copy file1 > if /opt/path2 found on the server then copy file1 > if /opt/path3 found on the server then copy file1 > > if none of the above path found then dont copy file1 > > Thanks, > Jeeva > >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Gary Larizza
2012-Apr-02 03:41 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
Jeeva,
I would make a custom fact (
http://docs.puppetlabs.com/guides/custom_facts.html) that checks for the
presence of these files. Your Puppet manifest would check the condition of
this fact to ensure the file absent or present (i.e. if $custom_fact { file
{ ''/path/to/file'': ensure => file } } ).
Does that make sense?
On Sun, Apr 1, 2012 at 8:37 PM, Munna S <19.munna@gmail.com> wrote:
> Team,
>
> Any help
>
> Thanks,
> Jeeva
>
> On Fri, Mar 30, 2012 at 12:51 PM, Munna S <19.munna@gmail.com> wrote:
>
>> Team,
>>
>> I need a puppet module to copy a file to different location based on
>> condition check . Below is my requirement
>>
>> if /opt/path1 found on the server then copy file1
>> if /opt/path2 found on the server then copy file1
>> if /opt/path3 found on the server then copy file1
>>
>> if none of the above path found then dont copy file1
>>
>> Thanks,
>> Jeeva
>>
>>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Puppet Users" group.
> To post to this group, send email to puppet-users@googlegroups.com.
> To unsubscribe from this group, send email to
> puppet-users+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/puppet-users?hl=en.
>
--
Gary Larizza
Professional Services Engineer
Puppet Labs
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-02 03:48 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
Hi Gary, How i can put this in my init.pp file. Actually i am checking for the path. if path found then copy the file else dont create any file/folder. So here i need to check for 3 different path on each server. if any of the below path exist then copy the file. Thanks, Jeeva On Sun, Apr 1, 2012 at 10:41 PM, Gary Larizza <gary@puppetlabs.com> wrote:> Jeeva, > > > I would make a custom fact ( > http://docs.puppetlabs.com/guides/custom_facts.html) that checks for the > presence of these files. Your Puppet manifest would check the condition of > this fact to ensure the file absent or present (i.e. if $custom_fact { file > { ''/path/to/file'': ensure => file } } ). > > > Does that make sense? > > > > On Sun, Apr 1, 2012 at 8:37 PM, Munna S <19.munna@gmail.com> wrote: > >> Team, >> >> Any help >> >> Thanks, >> Jeeva >> >> On Fri, Mar 30, 2012 at 12:51 PM, Munna S <19.munna@gmail.com> wrote: >> >>> Team, >>> >>> I need a puppet module to copy a file to different location based on >>> condition check . Below is my requirement >>> >>> if /opt/path1 found on the server then copy file1 >>> if /opt/path2 found on the server then copy file1 >>> if /opt/path3 found on the server then copy file1 >>> >>> if none of the above path found then dont copy file1 >>> >>> Thanks, >>> Jeeva >>> >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Puppet Users" group. >> To post to this group, send email to puppet-users@googlegroups.com. >> To unsubscribe from this group, send email to >> puppet-users+unsubscribe@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/puppet-users?hl=en. >> > > > > -- > > Gary Larizza > Professional Services Engineer > Puppet Labs > > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To post to this group, send email to puppet-users@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Gary Larizza
2012-Apr-02 04:05 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
Jeeva,
Your custom fact would do something like:
File.directory?(''/path/to/check'') that returns true or false
depending on
whether the directory existed. Your fact would return a true or false
value (so if the custom fact were named ''path_to_x'' you would
do something
like this in your init.pp
if $path_to_x == ''true'' {
# Do something here
} else {
# Do something else here
}
Do this for every custom fact (corresponding to the paths you want to
check) in your manifest, or combine them into one giant if statement like:
if ($path_to_x == ''true'') or ($path_to_y ==
''true'') {
# Do something
}
Does this make sense?
On Sun, Apr 1, 2012 at 8:48 PM, Munna S <19.munna@gmail.com> wrote:
> Hi Gary,
>
> How i can put this in my init.pp file. Actually i am checking for the
> path. if path found then copy the file else dont create any file/folder. So
> here i need to check for 3 different path on each server. if any of the
> below path exist then copy the file.
>
> Thanks,
> Jeeva
>
> On Sun, Apr 1, 2012 at 10:41 PM, Gary Larizza <gary@puppetlabs.com>
wrote:
>
>> Jeeva,
>>
>>
>> I would make a custom fact (
>> http://docs.puppetlabs.com/guides/custom_facts.html) that checks for
the
>> presence of these files. Your Puppet manifest would check the
condition of
>> this fact to ensure the file absent or present (i.e. if $custom_fact {
file
>> { ''/path/to/file'': ensure => file } } ).
>>
>>
>> Does that make sense?
>>
>>
>>
>> On Sun, Apr 1, 2012 at 8:37 PM, Munna S <19.munna@gmail.com>
wrote:
>>
>>> Team,
>>>
>>> Any help
>>>
>>> Thanks,
>>> Jeeva
>>>
>>> On Fri, Mar 30, 2012 at 12:51 PM, Munna S
<19.munna@gmail.com> wrote:
>>>
>>>> Team,
>>>>
>>>> I need a puppet module to copy a file to different location
based on
>>>> condition check . Below is my requirement
>>>>
>>>> if /opt/path1 found on the server then copy file1
>>>> if /opt/path2 found on the server then copy file1
>>>> if /opt/path3 found on the server then copy file1
>>>>
>>>> if none of the above path found then dont copy file1
>>>>
>>>> Thanks,
>>>> Jeeva
>>>>
>>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Puppet Users" group.
>>> To post to this group, send email to puppet-users@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> puppet-users+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/puppet-users?hl=en.
>>>
>>
>>
>>
>> --
>>
>> Gary Larizza
>> Professional Services Engineer
>> Puppet Labs
>>
>> --
>> You received this message because you are subscribed to the Google
Groups
>> "Puppet Users" group.
>> To post to this group, send email to puppet-users@googlegroups.com.
>> To unsubscribe from this group, send email to
>> puppet-users+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/puppet-users?hl=en.
>>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Puppet Users" group.
> To post to this group, send email to puppet-users@googlegroups.com.
> To unsubscribe from this group, send email to
> puppet-users+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/puppet-users?hl=en.
>
--
Gary Larizza
Professional Services Engineer
Puppet Labs
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-02 04:08 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
Thank you so much Gary. I will try this Thanks, Jeeva On Sun, Apr 1, 2012 at 11:05 PM, Gary Larizza <gary@puppetlabs.com> wrote:> Jeeva, > > Your custom fact would do something like: > File.directory?(''/path/to/check'') that returns true or false depending on > whether the directory existed. Your fact would return a true or false > value (so if the custom fact were named ''path_to_x'' you would do something > like this in your init.pp > > if $path_to_x == ''true'' { > # Do something here > } else { > # Do something else here > } > > Do this for every custom fact (corresponding to the paths you want to > check) in your manifest, or combine them into one giant if statement like: > > if ($path_to_x == ''true'') or ($path_to_y == ''true'') { > # Do something > } > > Does this make sense? > > > On Sun, Apr 1, 2012 at 8:48 PM, Munna S <19.munna@gmail.com> wrote: > >> Hi Gary, >> >> How i can put this in my init.pp file. Actually i am checking for the >> path. if path found then copy the file else dont create any file/folder. So >> here i need to check for 3 different path on each server. if any of the >> below path exist then copy the file. >> >> Thanks, >> Jeeva >> >> On Sun, Apr 1, 2012 at 10:41 PM, Gary Larizza <gary@puppetlabs.com>wrote: >> >>> Jeeva, >>> >>> >>> I would make a custom fact ( >>> http://docs.puppetlabs.com/guides/custom_facts.html) that checks for >>> the presence of these files. Your Puppet manifest would check the >>> condition of this fact to ensure the file absent or present (i.e. if >>> $custom_fact { file { ''/path/to/file'': ensure => file } } ). >>> >>> >>> Does that make sense? >>> >>> >>> >>> On Sun, Apr 1, 2012 at 8:37 PM, Munna S <19.munna@gmail.com> wrote: >>> >>>> Team, >>>> >>>> Any help >>>> >>>> Thanks, >>>> Jeeva >>>> >>>> On Fri, Mar 30, 2012 at 12:51 PM, Munna S <19.munna@gmail.com> wrote: >>>> >>>>> Team, >>>>> >>>>> I need a puppet module to copy a file to different location based on >>>>> condition check . Below is my requirement >>>>> >>>>> if /opt/path1 found on the server then copy file1 >>>>> if /opt/path2 found on the server then copy file1 >>>>> if /opt/path3 found on the server then copy file1 >>>>> >>>>> if none of the above path found then dont copy file1 >>>>> >>>>> Thanks, >>>>> Jeeva >>>>> >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Puppet Users" group. >>>> To post to this group, send email to puppet-users@googlegroups.com. >>>> To unsubscribe from this group, send email to >>>> puppet-users+unsubscribe@googlegroups.com. >>>> For more options, visit this group at >>>> http://groups.google.com/group/puppet-users?hl=en. >>>> >>> >>> >>> >>> -- >>> >>> Gary Larizza >>> Professional Services Engineer >>> Puppet Labs >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Puppet Users" group. >>> To post to this group, send email to puppet-users@googlegroups.com. >>> To unsubscribe from this group, send email to >>> puppet-users+unsubscribe@googlegroups.com. >>> For more options, visit this group at >>> http://groups.google.com/group/puppet-users?hl=en. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Puppet Users" group. >> To post to this group, send email to puppet-users@googlegroups.com. >> To unsubscribe from this group, send email to >> puppet-users+unsubscribe@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/puppet-users?hl=en. >> > > > > -- > > Gary Larizza > Professional Services Engineer > Puppet Labs > > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To post to this group, send email to puppet-users@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-12 14:18 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
Hi Gary,
I created a custom fact path_to_check.rb and placed it under
.../module_name/lib/facter
below is my init.pp file
class class_name
if $path_to_check == present{
file { "/opt/xyz/file.txt":
owner => "jboss",
group => "jboss",
source =>
"puppet://$puppetserver/modules/module_name/opt/xyz/file.txt",
}
}
}
But i dont see files are getting pushed
On Sun, Apr 1, 2012 at 11:08 PM, Munna S <19.munna@gmail.com> wrote:
> Thank you so much Gary. I will try this
>
> Thanks,
> Jeeva
>
> On Sun, Apr 1, 2012 at 11:05 PM, Gary Larizza <gary@puppetlabs.com>
wrote:
>
>> Jeeva,
>>
>> Your custom fact would do something like:
>> File.directory?(''/path/to/check'') that returns true
or false depending on
>> whether the directory existed. Your fact would return a true or false
>> value (so if the custom fact were named ''path_to_x''
you would do something
>> like this in your init.pp
>>
>> if $path_to_x == ''true'' {
>> # Do something here
>> } else {
>> # Do something else here
>> }
>>
>> Do this for every custom fact (corresponding to the paths you want to
>> check) in your manifest, or combine them into one giant if statement
like:
>>
>> if ($path_to_x == ''true'') or ($path_to_y ==
''true'') {
>> # Do something
>> }
>>
>> Does this make sense?
>>
>>
>> On Sun, Apr 1, 2012 at 8:48 PM, Munna S <19.munna@gmail.com>
wrote:
>>
>>> Hi Gary,
>>>
>>> How i can put this in my init.pp file. Actually i am checking for
the
>>> path. if path found then copy the file else dont create any
file/folder. So
>>> here i need to check for 3 different path on each server. if any of
the
>>> below path exist then copy the file.
>>>
>>> Thanks,
>>> Jeeva
>>>
>>> On Sun, Apr 1, 2012 at 10:41 PM, Gary Larizza
<gary@puppetlabs.com>wrote:
>>>
>>>> Jeeva,
>>>>
>>>>
>>>> I would make a custom fact (
>>>> http://docs.puppetlabs.com/guides/custom_facts.html) that
checks for
>>>> the presence of these files. Your Puppet manifest would check
the
>>>> condition of this fact to ensure the file absent or present
(i.e. if
>>>> $custom_fact { file { ''/path/to/file'': ensure
=> file } } ).
>>>>
>>>>
>>>> Does that make sense?
>>>>
>>>>
>>>>
>>>> On Sun, Apr 1, 2012 at 8:37 PM, Munna S
<19.munna@gmail.com> wrote:
>>>>
>>>>> Team,
>>>>>
>>>>> Any help
>>>>>
>>>>> Thanks,
>>>>> Jeeva
>>>>>
>>>>> On Fri, Mar 30, 2012 at 12:51 PM, Munna S
<19.munna@gmail.com> wrote:
>>>>>
>>>>>> Team,
>>>>>>
>>>>>> I need a puppet module to copy a file to different
location based on
>>>>>> condition check . Below is my requirement
>>>>>>
>>>>>> if /opt/path1 found on the server then copy file1
>>>>>> if /opt/path2 found on the server then copy file1
>>>>>> if /opt/path3 found on the server then copy file1
>>>>>>
>>>>>> if none of the above path found then dont copy file1
>>>>>>
>>>>>> Thanks,
>>>>>> Jeeva
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the
Google
>>>>> Groups "Puppet Users" group.
>>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> puppet-users+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> Gary Larizza
>>>> Professional Services Engineer
>>>> Puppet Labs
>>>>
>>>> --
>>>> You received this message because you are subscribed to the
Google
>>>> Groups "Puppet Users" group.
>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> puppet-users+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Puppet Users" group.
>>> To post to this group, send email to puppet-users@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> puppet-users+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/puppet-users?hl=en.
>>>
>>
>>
>>
>> --
>>
>> Gary Larizza
>> Professional Services Engineer
>> Puppet Labs
>>
>> --
>> You received this message because you are subscribed to the Google
Groups
>> "Puppet Users" group.
>> To post to this group, send email to puppet-users@googlegroups.com.
>> To unsubscribe from this group, send email to
>> puppet-users+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/puppet-users?hl=en.
>>
>
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
Brian Gallew
2012-Apr-12 14:24 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
Another alternative is to unconditionally copy the file to a staging
director (e.g. /var/staging) and then have
exec {
"conditional copy to path1":
onlyif => "test -d /opt/path1"
command => "rsync -a /var/staging/file.txt /opt/path1";
"conditional copy to path2":
onlyif => "test -d /opt/path2"
command => "rsync -a /var/staging/file.txt /opt/path2";
"conditional copy to path3":
onlyif => "test -d /opt/path3"
command => "rsync -a /var/staging/file.txt /opt/path3";
}
For neatness'' sake, you could turn that into a define{}
On Thu, Apr 12, 2012 at 7:18 AM, Munna S <19.munna@gmail.com> wrote:
> Hi Gary,
>
> I created a custom fact path_to_check.rb and placed it under
> .../module_name/lib/facter
>
> below is my init.pp file
>
> class class_name
> if $path_to_check == present{
> file { "/opt/xyz/file.txt":
> owner => "jboss",
> group => "jboss",
> source =>
> "puppet://$puppetserver/modules/module_name/opt/xyz/file.txt",
> }
> }
> }
> But i dont see files are getting pushed
> On Sun, Apr 1, 2012 at 11:08 PM, Munna S <19.munna@gmail.com> wrote:
>
>> Thank you so much Gary. I will try this
>>
>> Thanks,
>> Jeeva
>>
>> On Sun, Apr 1, 2012 at 11:05 PM, Gary Larizza
<gary@puppetlabs.com>wrote:
>>
>>> Jeeva,
>>>
>>> Your custom fact would do something like:
>>> File.directory?(''/path/to/check'') that returns
true or false depending on
>>> whether the directory existed. Your fact would return a true or
false
>>> value (so if the custom fact were named
''path_to_x'' you would do something
>>> like this in your init.pp
>>>
>>> if $path_to_x == ''true'' {
>>> # Do something here
>>> } else {
>>> # Do something else here
>>> }
>>>
>>> Do this for every custom fact (corresponding to the paths you want
to
>>> check) in your manifest, or combine them into one giant if
statement like:
>>>
>>> if ($path_to_x == ''true'') or ($path_to_y ==
''true'') {
>>> # Do something
>>> }
>>>
>>> Does this make sense?
>>>
>>>
>>> On Sun, Apr 1, 2012 at 8:48 PM, Munna S <19.munna@gmail.com>
wrote:
>>>
>>>> Hi Gary,
>>>>
>>>> How i can put this in my init.pp file. Actually i am checking
for the
>>>> path. if path found then copy the file else dont create any
file/folder. So
>>>> here i need to check for 3 different path on each server. if
any of the
>>>> below path exist then copy the file.
>>>>
>>>> Thanks,
>>>> Jeeva
>>>>
>>>> On Sun, Apr 1, 2012 at 10:41 PM, Gary Larizza
<gary@puppetlabs.com>wrote:
>>>>
>>>>> Jeeva,
>>>>>
>>>>>
>>>>> I would make a custom fact (
>>>>> http://docs.puppetlabs.com/guides/custom_facts.html) that
checks for
>>>>> the presence of these files. Your Puppet manifest would
check the
>>>>> condition of this fact to ensure the file absent or present
(i.e. if
>>>>> $custom_fact { file { ''/path/to/file'':
ensure => file } } ).
>>>>>
>>>>>
>>>>> Does that make sense?
>>>>>
>>>>>
>>>>>
>>>>> On Sun, Apr 1, 2012 at 8:37 PM, Munna S
<19.munna@gmail.com> wrote:
>>>>>
>>>>>> Team,
>>>>>>
>>>>>> Any help
>>>>>>
>>>>>> Thanks,
>>>>>> Jeeva
>>>>>>
>>>>>> On Fri, Mar 30, 2012 at 12:51 PM, Munna S
<19.munna@gmail.com> wrote:
>>>>>>
>>>>>>> Team,
>>>>>>>
>>>>>>> I need a puppet module to copy a file to different
location based on
>>>>>>> condition check . Below is my requirement
>>>>>>>
>>>>>>> if /opt/path1 found on the server then copy file1
>>>>>>> if /opt/path2 found on the server then copy file1
>>>>>>> if /opt/path3 found on the server then copy file1
>>>>>>>
>>>>>>> if none of the above path found then dont copy
file1
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Jeeva
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to
the Google
>>>>>> Groups "Puppet Users" group.
>>>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> puppet-users+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> Gary Larizza
>>>>> Professional Services Engineer
>>>>> Puppet Labs
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the
Google
>>>>> Groups "Puppet Users" group.
>>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> puppet-users+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the
Google
>>>> Groups "Puppet Users" group.
>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> puppet-users+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>
>>>
>>>
>>>
>>> --
>>>
>>> Gary Larizza
>>> Professional Services Engineer
>>> Puppet Labs
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Puppet Users" group.
>>> To post to this group, send email to puppet-users@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> puppet-users+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/puppet-users?hl=en.
>>>
>>
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Puppet Users" group.
> To post to this group, send email to puppet-users@googlegroups.com.
> To unsubscribe from this group, send email to
> puppet-users+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/puppet-users?hl=en.
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-12 14:53 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
Hi Brian,
below is my updated init.pp file. but i am getting the error as
Apr 12 14:49:51 pil-vm-pup-01 puppet-master[14586]:
(//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog from remote
server: Error 400 on SERVER: Could not find class dev_jboss_jeeva for
vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/jeeva_base.pp:2 on
node vm-jeeva2.aircell.prod
Apr 12 14:49:51 pil-vm-pup-01 puppet-master[14586]:
(//vm-jeeva2.aircell.prod/Puppet) Using cached catalog
Apr 12 14:49:51 pil-vm-pup-01 puppet-master[14586]:
(//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog; skipping run
my init.pp file
class dev_jboss_jeeva {
exec {
onlyif => "test -d /opt/xyz"
file { "/opt/xyz/file.txt":
owner => "jboss",
group => "jboss",
source =>
"puppet://$puppetserver/modules/module_name/opt/xyz/file.txt",
}
}
}
Thanks,
Jeeva
On Thu, Apr 12, 2012 at 9:24 AM, Brian Gallew <geek@gallew.org> wrote:
> Another alternative is to unconditionally copy the file to a staging
> director (e.g. /var/staging) and then have
>
> exec {
> "conditional copy to path1":
> onlyif => "test -d /opt/path1"
> command => "rsync -a /var/staging/file.txt /opt/path1";
> "conditional copy to path2":
> onlyif => "test -d /opt/path2"
> command => "rsync -a /var/staging/file.txt /opt/path2";
> "conditional copy to path3":
> onlyif => "test -d /opt/path3"
> command => "rsync -a /var/staging/file.txt /opt/path3";
> }
>
> For neatness'' sake, you could turn that into a define{}
>
> On Thu, Apr 12, 2012 at 7:18 AM, Munna S <19.munna@gmail.com> wrote:
>
>> Hi Gary,
>>
>> I created a custom fact path_to_check.rb and placed it under
>> .../module_name/lib/facter
>>
>> below is my init.pp file
>>
>> class class_name
>> if $path_to_check == present{
>> file { "/opt/xyz/file.txt":
>> owner => "jboss",
>> group => "jboss",
>> source =>
>>
"puppet://$puppetserver/modules/module_name/opt/xyz/file.txt",
>> }
>> }
>> }
>> But i dont see files are getting pushed
>> On Sun, Apr 1, 2012 at 11:08 PM, Munna S <19.munna@gmail.com>
wrote:
>>
>>> Thank you so much Gary. I will try this
>>>
>>> Thanks,
>>> Jeeva
>>>
>>> On Sun, Apr 1, 2012 at 11:05 PM, Gary Larizza
<gary@puppetlabs.com>wrote:
>>>
>>>> Jeeva,
>>>>
>>>> Your custom fact would do something like:
>>>> File.directory?(''/path/to/check'') that
returns true or false depending on
>>>> whether the directory existed. Your fact would return a true
or false
>>>> value (so if the custom fact were named
''path_to_x'' you would do something
>>>> like this in your init.pp
>>>>
>>>> if $path_to_x == ''true'' {
>>>> # Do something here
>>>> } else {
>>>> # Do something else here
>>>> }
>>>>
>>>> Do this for every custom fact (corresponding to the paths you
want to
>>>> check) in your manifest, or combine them into one giant if
statement like:
>>>>
>>>> if ($path_to_x == ''true'') or ($path_to_y
== ''true'') {
>>>> # Do something
>>>> }
>>>>
>>>> Does this make sense?
>>>>
>>>>
>>>> On Sun, Apr 1, 2012 at 8:48 PM, Munna S
<19.munna@gmail.com> wrote:
>>>>
>>>>> Hi Gary,
>>>>>
>>>>> How i can put this in my init.pp file. Actually i am
checking for the
>>>>> path. if path found then copy the file else dont create any
file/folder. So
>>>>> here i need to check for 3 different path on each server.
if any of the
>>>>> below path exist then copy the file.
>>>>>
>>>>> Thanks,
>>>>> Jeeva
>>>>>
>>>>> On Sun, Apr 1, 2012 at 10:41 PM, Gary Larizza
<gary@puppetlabs.com>wrote:
>>>>>
>>>>>> Jeeva,
>>>>>>
>>>>>>
>>>>>> I would make a custom fact (
>>>>>> http://docs.puppetlabs.com/guides/custom_facts.html)
that checks for
>>>>>> the presence of these files. Your Puppet manifest
would check the
>>>>>> condition of this fact to ensure the file absent or
present (i.e. if
>>>>>> $custom_fact { file {
''/path/to/file'': ensure => file } } ).
>>>>>>
>>>>>>
>>>>>> Does that make sense?
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sun, Apr 1, 2012 at 8:37 PM, Munna S
<19.munna@gmail.com> wrote:
>>>>>>
>>>>>>> Team,
>>>>>>>
>>>>>>> Any help
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Jeeva
>>>>>>>
>>>>>>> On Fri, Mar 30, 2012 at 12:51 PM, Munna S
<19.munna@gmail.com>wrote:
>>>>>>>
>>>>>>>> Team,
>>>>>>>>
>>>>>>>> I need a puppet module to copy a file to
different location based
>>>>>>>> on condition check . Below is my requirement
>>>>>>>>
>>>>>>>> if /opt/path1 found on the server then copy
file1
>>>>>>>> if /opt/path2 found on the server then copy
file1
>>>>>>>> if /opt/path3 found on the server then copy
file1
>>>>>>>>
>>>>>>>> if none of the above path found then dont copy
file1
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Jeeva
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are
subscribed to the Google
>>>>>>> Groups "Puppet Users" group.
>>>>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> puppet-users+unsubscribe@googlegroups.com.
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>> Gary Larizza
>>>>>> Professional Services Engineer
>>>>>> Puppet Labs
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to
the Google
>>>>>> Groups "Puppet Users" group.
>>>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> puppet-users+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>>>
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the
Google
>>>>> Groups "Puppet Users" group.
>>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> puppet-users+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> Gary Larizza
>>>> Professional Services Engineer
>>>> Puppet Labs
>>>>
>>>> --
>>>> You received this message because you are subscribed to the
Google
>>>> Groups "Puppet Users" group.
>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>> To unsubscribe from this group, send email to
>>>> puppet-users+unsubscribe@googlegroups.com.
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>
>>>
>>>
>> --
>> You received this message because you are subscribed to the Google
Groups
>> "Puppet Users" group.
>> To post to this group, send email to puppet-users@googlegroups.com.
>> To unsubscribe from this group, send email to
>> puppet-users+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/puppet-users?hl=en.
>>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Puppet Users" group.
> To post to this group, send email to puppet-users@googlegroups.com.
> To unsubscribe from this group, send email to
> puppet-users+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/puppet-users?hl=en.
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
As Brian suggested, using define{} is the better way of doing it; you
can even copy different files to different directories, if required.
Something like this:
# /etc/puppet/modules/<ur_module>/manifests/staging.pp
------------------------------------------------------
class ur_module::staging {
define opt_dir($file, $path) {
exec { "copy_${dir}":
path => [ ''/bin'',
''/usr/bin'' ],
command => "rsync -a /var/staging/${file}
/opt/${path}",
onlyif => "test -d /opt/${path}",
}
}
-------------------------------------------------------
and, then in the init.pp:
# /etc/puppet/modules/<ur_module>/manifests/init.pp
---------------------------------------------------
class file_copy {
include ur_module::staging
ur_module::staging::opt_dir {
''path_1'':
file => ''file.txt'',
path => ''path1'';
''path_2'':
file => ''another_file.txt'',
path => ''path2'';
.....
... keep carrying on ...
}
}
---------------------------------------------------
That should do that job. Cheers!!
On Apr 12, 3:24 pm, Brian Gallew <g...@gallew.org>
wrote:> Another alternative is to unconditionally copy the file to a staging
> director (e.g. /var/staging) and then have
>
> exec {
> "conditional copy to path1":
> onlyif => "test -d /opt/path1"
> command => "rsync -a /var/staging/file.txt /opt/path1";
> "conditional copy to path2":
> onlyif => "test -d /opt/path2"
> command => "rsync -a /var/staging/file.txt /opt/path2";
> "conditional copy to path3":
> onlyif => "test -d /opt/path3"
> command => "rsync -a /var/staging/file.txt /opt/path3";
>
> }
>
> For neatness'' sake, you could turn that into a define{}
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
Brian Gallew
2012-Apr-12 15:04 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
You can''t put a file{} resource inside an exec{} resource.
On Thu, Apr 12, 2012 at 7:53 AM, Munna S <19.munna@gmail.com> wrote:
> Hi Brian,
>
> below is my updated init.pp file. but i am getting the error as
>
> Apr 12 14:49:51 pil-vm-pup-01 puppet-master[14586]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog from remote
> server: Error 400 on SERVER: Could not find class dev_jboss_jeeva for
> vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/jeeva_base.pp:2 on
> node vm-jeeva2.aircell.prod
> Apr 12 14:49:51 pil-vm-pup-01 puppet-master[14586]:
> (//vm-jeeva2.aircell.prod/Puppet) Using cached catalog
> Apr 12 14:49:51 pil-vm-pup-01 puppet-master[14586]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog; skipping run
> my init.pp file
>
> class dev_jboss_jeeva {
> exec {
> onlyif => "test -d /opt/xyz"
>
> file { "/opt/xyz/file.txt":
> owner => "jboss",
> group => "jboss",
> source =>
"puppet://$puppetserver/modules/module_name/opt/xyz/file.txt",
> }
> }
> }
>
> Thanks,
> Jeeva
> On Thu, Apr 12, 2012 at 9:24 AM, Brian Gallew <geek@gallew.org>
wrote:
>
>> Another alternative is to unconditionally copy the file to a staging
>> director (e.g. /var/staging) and then have
>>
>> exec {
>> "conditional copy to path1":
>> onlyif => "test -d /opt/path1"
>> command => "rsync -a /var/staging/file.txt
/opt/path1";
>> "conditional copy to path2":
>> onlyif => "test -d /opt/path2"
>> command => "rsync -a /var/staging/file.txt
/opt/path2";
>> "conditional copy to path3":
>> onlyif => "test -d /opt/path3"
>> command => "rsync -a /var/staging/file.txt
/opt/path3";
>> }
>>
>> For neatness'' sake, you could turn that into a define{}
>>
>> On Thu, Apr 12, 2012 at 7:18 AM, Munna S <19.munna@gmail.com>
wrote:
>>
>>> Hi Gary,
>>>
>>> I created a custom fact path_to_check.rb and placed it under
>>> .../module_name/lib/facter
>>>
>>> below is my init.pp file
>>>
>>> class class_name
>>> if $path_to_check == present{
>>> file { "/opt/xyz/file.txt":
>>> owner => "jboss",
>>> group => "jboss",
>>> source =>
>>>
"puppet://$puppetserver/modules/module_name/opt/xyz/file.txt",
>>> }
>>> }
>>> }
>>> But i dont see files are getting pushed
>>> On Sun, Apr 1, 2012 at 11:08 PM, Munna S <19.munna@gmail.com>
wrote:
>>>
>>>> Thank you so much Gary. I will try this
>>>>
>>>> Thanks,
>>>> Jeeva
>>>>
>>>> On Sun, Apr 1, 2012 at 11:05 PM, Gary Larizza
<gary@puppetlabs.com>wrote:
>>>>
>>>>> Jeeva,
>>>>>
>>>>> Your custom fact would do something like:
>>>>> File.directory?(''/path/to/check'') that
returns true or false depending on
>>>>> whether the directory existed. Your fact would return a
true or false
>>>>> value (so if the custom fact were named
''path_to_x'' you would do something
>>>>> like this in your init.pp
>>>>>
>>>>> if $path_to_x == ''true'' {
>>>>> # Do something here
>>>>> } else {
>>>>> # Do something else here
>>>>> }
>>>>>
>>>>> Do this for every custom fact (corresponding to the paths
you want to
>>>>> check) in your manifest, or combine them into one giant if
statement like:
>>>>>
>>>>> if ($path_to_x == ''true'') or
($path_to_y == ''true'') {
>>>>> # Do something
>>>>> }
>>>>>
>>>>> Does this make sense?
>>>>>
>>>>>
>>>>> On Sun, Apr 1, 2012 at 8:48 PM, Munna S
<19.munna@gmail.com> wrote:
>>>>>
>>>>>> Hi Gary,
>>>>>>
>>>>>> How i can put this in my init.pp file. Actually i am
checking for the
>>>>>> path. if path found then copy the file else dont create
any file/folder. So
>>>>>> here i need to check for 3 different path on each
server. if any of the
>>>>>> below path exist then copy the file.
>>>>>>
>>>>>> Thanks,
>>>>>> Jeeva
>>>>>>
>>>>>> On Sun, Apr 1, 2012 at 10:41 PM, Gary Larizza
<gary@puppetlabs.com>wrote:
>>>>>>
>>>>>>> Jeeva,
>>>>>>>
>>>>>>>
>>>>>>> I would make a custom fact (
>>>>>>>
http://docs.puppetlabs.com/guides/custom_facts.html) that checks
>>>>>>> for the presence of these files. Your Puppet
manifest would check the
>>>>>>> condition of this fact to ensure the file absent or
present (i.e. if
>>>>>>> $custom_fact { file {
''/path/to/file'': ensure => file } } ).
>>>>>>>
>>>>>>>
>>>>>>> Does that make sense?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Sun, Apr 1, 2012 at 8:37 PM, Munna S
<19.munna@gmail.com> wrote:
>>>>>>>
>>>>>>>> Team,
>>>>>>>>
>>>>>>>> Any help
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Jeeva
>>>>>>>>
>>>>>>>> On Fri, Mar 30, 2012 at 12:51 PM, Munna S
<19.munna@gmail.com>wrote:
>>>>>>>>
>>>>>>>>> Team,
>>>>>>>>>
>>>>>>>>> I need a puppet module to copy a file to
different location based
>>>>>>>>> on condition check . Below is my
requirement
>>>>>>>>>
>>>>>>>>> if /opt/path1 found on the server then
copy file1
>>>>>>>>> if /opt/path2 found on the server then copy
file1
>>>>>>>>> if /opt/path3 found on the server then copy
file1
>>>>>>>>>
>>>>>>>>> if none of the above path found then dont
copy file1
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> Jeeva
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are
subscribed to the Google
>>>>>>>> Groups "Puppet Users" group.
>>>>>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>>>>>> To unsubscribe from this group, send email to
>>>>>>>> puppet-users+unsubscribe@googlegroups.com.
>>>>>>>> For more options, visit this group at
>>>>>>>>
http://groups.google.com/group/puppet-users?hl=en.
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>> Gary Larizza
>>>>>>> Professional Services Engineer
>>>>>>> Puppet Labs
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are
subscribed to the Google
>>>>>>> Groups "Puppet Users" group.
>>>>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> puppet-users+unsubscribe@googlegroups.com.
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to
the Google
>>>>>> Groups "Puppet Users" group.
>>>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>>>> To unsubscribe from this group, send email to
>>>>>> puppet-users+unsubscribe@googlegroups.com.
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> Gary Larizza
>>>>> Professional Services Engineer
>>>>> Puppet Labs
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the
Google
>>>>> Groups "Puppet Users" group.
>>>>> To post to this group, send email to
puppet-users@googlegroups.com.
>>>>> To unsubscribe from this group, send email to
>>>>> puppet-users+unsubscribe@googlegroups.com.
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/puppet-users?hl=en.
>>>>>
>>>>
>>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Puppet Users" group.
>>> To post to this group, send email to puppet-users@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> puppet-users+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/puppet-users?hl=en.
>>>
>>
>> --
>> You received this message because you are subscribed to the Google
Groups
>> "Puppet Users" group.
>> To post to this group, send email to puppet-users@googlegroups.com.
>> To unsubscribe from this group, send email to
>> puppet-users+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/puppet-users?hl=en.
>>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Puppet Users" group.
> To post to this group, send email to puppet-users@googlegroups.com.
> To unsubscribe from this group, send email to
> puppet-users+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/puppet-users?hl=en.
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
You mean, doing this:
define opt_dir($fl_name, $path) {
instead of this?
define opt_dir($file, $path) {
On Apr 12, 4:04 pm, Brian Gallew <g...@gallew.org>
wrote:> You can''t put a file{} resource inside an exec{} resource.
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-12 15:17 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
I am bit confused about /var/staging/${file} . Let me explain again my
requirement.
we have 3 version of jboss running on multiple servers.
I need a puppet module to copy a jboss config file to different location
based on path condition check . Below is my requirement
if /opt/path1 found on the server then copy file1 or 2
if /opt/path2 found on the server then copy file1 or 2
if /opt/path3 found on the server then copy file1 or 2
if none of the above path found then dont copy any file
On Thu, Apr 12, 2012 at 10:10 AM, Sans <r.santanu.das@gmail.com> wrote:
> You mean, doing this:
>
> define opt_dir($fl_name, $path) {
>
> instead of this?
>
> define opt_dir($file, $path) {
>
>
>
> On Apr 12, 4:04 pm, Brian Gallew <g...@gallew.org> wrote:
> > You can''t put a file{} resource inside an exec{} resource.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Puppet Users" group.
> To post to this group, send email to puppet-users@googlegroups.com.
> To unsubscribe from this group, send email to
> puppet-users+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/puppet-users?hl=en.
>
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
w.r.t ${file}, what I meant is you can make it "super dynamic" with
filenames, if you had to copy different files, as opposed to "a
single" file. This is a perfectly working example (change the values/
parameter as required):
# /etc/puppet/modules/<ur_module>/manifests/test.pp
------------------------------------------------------
class d_services::test {
define opt_dir($path) {
exec { "copy_${path}":
path => [ ''/bin'',
''/usr/bin'' ],
command => "cp /tmp/yum.conf.security /opt/${path}",
onlyif => "test -d /opt/${path}",
}
}
}
# /etc/puppet/modules/<ur_module>/manifests/init.pp
---------------------------------------------------
class mod_test {
include d_services::test
d_services::test::opt_dir {
''test_1'':
path => ''test1'';
''test_2'':
path => ''test2'';
''test_3'':
path => ''test3'';
}
}
---------------------------------------------------
It will copy "/tmp/yum.conf.security" to "/opt/test{1|2|3}",
if
available.
Hope this helps. Cheers!!
On Apr 12, 4:17 pm, Munna S <19.mu...@gmail.com>
wrote:> I am bit confused about /var/staging/${file} . Let me explain again my
> requirement.
>
> we have 3 version of jboss running on multiple servers.
>
> I need a puppet module to copy a jboss config file to different location
> based on path condition check . Below is my requirement
>
> if /opt/path1 found on the server then copy file1 or 2
> if /opt/path2 found on the server then copy file1 or 2
> if /opt/path3 found on the server then copy file1 or 2
>
> if none of the above path found then dont copy any file
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-12 17:26 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
source file path it will take from my puppet master server right ? -Jeeva On Thu, Apr 12, 2012 at 11:20 AM, Sans <r.santanu.das@gmail.com> wrote:> w.r.t ${file}, what I meant is you can make it "super dynamic" with > filenames, if you had to copy different files, as opposed to "a > single" file. This is a perfectly working example (change the values/ > parameter as required): > > > > # /etc/puppet/modules/<ur_module>/manifests/test.pp > ------------------------------------------------------ > class d_services::test { > > define opt_dir($path) { > > exec { "copy_${path}": > path => [ ''/bin'', ''/usr/bin'' ], > command => "cp /tmp/yum.conf.security /opt/${path}", > onlyif => "test -d /opt/${path}", > } > } > } > > > # /etc/puppet/modules/<ur_module>/manifests/init.pp > --------------------------------------------------- > class mod_test { > > include d_services::test > d_services::test::opt_dir { > > ''test_1'': > path => ''test1''; > > ''test_2'': > path => ''test2''; > > ''test_3'': > path => ''test3''; > > } > } > --------------------------------------------------- > > > It will copy "/tmp/yum.conf.security" to "/opt/test{1|2|3}", if > available. > Hope this helps. Cheers!! > > > > > On Apr 12, 4:17 pm, Munna S <19.mu...@gmail.com> wrote: > > I am bit confused about /var/staging/${file} . Let me explain again my > > requirement. > > > > we have 3 version of jboss running on multiple servers. > > > > I need a puppet module to copy a jboss config file to different location > > based on path condition check . Below is my requirement > > > > if /opt/path1 found on the server then copy file1 or 2 > > if /opt/path2 found on the server then copy file1 or 2 > > if /opt/path3 found on the server then copy file1 or 2 > > > > if none of the above path found then dont copy any file > > > > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To post to this group, send email to puppet-users@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. > >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-12 17:40 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
Hi Sans,
This is my jboss.pp file
class d_services::jboss {
define opt_dir($path) {
exec { "copy_${path}":
path => [ ''/bin'',
''/usr/bin'' ],
command => "cp
/etc/puppet/modules/dev_jboss_jeeva/opt/jboss/
jboss-4.2.3.GA/server/default/conf/props/jmx-console-users.properties/opt/${path}",
onlyif => "test -d /opt/${path}",
}
}
}
this is my init.pp file
class dev_jboss_jeeva {
include d_services::jboss
d_services::jboss::opt_dir {
''jboss_1'':
path =>
''/opt/jboss/jboss-4.2.3.GA/server/default/conf/props/'';
}
}
But i am still getting the error
On Thu, Apr 12, 2012 at 12:26 PM, Munna S <19.munna@gmail.com> wrote:
> source file path it will take from my puppet master server right ?
>
> -Jeeva
>
> On Thu, Apr 12, 2012 at 11:20 AM, Sans <r.santanu.das@gmail.com>
wrote:
>
>> w.r.t ${file}, what I meant is you can make it "super
dynamic" with
>> filenames, if you had to copy different files, as opposed to "a
>> single" file. This is a perfectly working example (change the
values/
>> parameter as required):
>>
>>
>>
>> # /etc/puppet/modules/<ur_module>/manifests/test.pp
>> ------------------------------------------------------
>> class d_services::test {
>>
>> define opt_dir($path) {
>>
>> exec { "copy_${path}":
>> path => [ ''/bin'',
''/usr/bin'' ],
>> command => "cp /tmp/yum.conf.security
/opt/${path}",
>> onlyif => "test -d /opt/${path}",
>> }
>> }
>> }
>>
>>
>> # /etc/puppet/modules/<ur_module>/manifests/init.pp
>> ---------------------------------------------------
>> class mod_test {
>>
>> include d_services::test
>> d_services::test::opt_dir {
>>
>> ''test_1'':
>> path => ''test1'';
>>
>> ''test_2'':
>> path => ''test2'';
>>
>> ''test_3'':
>> path => ''test3'';
>>
>> }
>> }
>> ---------------------------------------------------
>>
>>
>> It will copy "/tmp/yum.conf.security" to
"/opt/test{1|2|3}", if
>> available.
>> Hope this helps. Cheers!!
>>
>>
>>
>>
>> On Apr 12, 4:17 pm, Munna S <19.mu...@gmail.com> wrote:
>> > I am bit confused about /var/staging/${file} . Let me explain
again my
>> > requirement.
>> >
>> > we have 3 version of jboss running on multiple servers.
>> >
>> > I need a puppet module to copy a jboss config file to different
location
>> > based on path condition check . Below is my requirement
>> >
>> > if /opt/path1 found on the server then copy file1 or 2
>> > if /opt/path2 found on the server then copy file1 or 2
>> > if /opt/path3 found on the server then copy file1 or 2
>> >
>> > if none of the above path found then dont copy any file
>> >
>>
>> --
>> You received this message because you are subscribed to the Google
Groups
>> "Puppet Users" group.
>> To post to this group, send email to puppet-users@googlegroups.com.
>> To unsubscribe from this group, send email to
>> puppet-users+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/puppet-users?hl=en.
>>
>>
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
You probably getting: "file not found" or something like that?
It''s
because you are trying to copy a file from one machine (i.e. puppet
server) to another machine, your puppet agent, using "cp" command.
Puppet has file{} resource and "source" parameter for that. Other than
that, if not typo, I don''t see any gap between the source_path and the
dest_path in your "cp" command.
Also, I think "class d_services::jboss" is wrong in your case. You
don''t have any "d_services" module, I suppose. Try this: If
"jmx-
console-users.properties" is the file that your are trying to copy,
then create a directory on your Puppet-master at "etc/puppet/modules/
dev_jboss_jeeva/files" and put the configuration file(s) in there
first. Then, use this:
# /etc/puppet/modules/dev_jboss_jeeva/manifests/jboss.pp
--------------------------------------------------------
class dev_jboss_jeeva::jboss {
define opt_dir($path) {
$j_conf = ''jmx-console-users.properties''
exec { "chk_${path}":
path => [ ''/bin'',
''/usr/bin'' ],
command => "test -d /opt/${path}",
}
file { "${path}_${j_conf}":
name => "/opt/${path}/${j_conf}",
mode => ''0644'', owner =>
''root'', group => ''root'',
source =>
"puppet:///modules/dev_jboss_jeeva/${j_conf}",
require => Exec[ "chk_${path}" ];
}
}
}
Now, suppose you are copying the file: jmx-console-users.properties to
"/opt/jboss_1", "/opt/jboss_2" and "/opt/jboss_3"
on the agent (if
available), change the init.pp like this:
# /etc/puppet/modules/dev_jboss_jeeva/manifests/init.pp
--------------------------------------------------------
class copy_jboss_conf {
include dev_jboss_jeeva::jboss
dev_jboss_jeeva::jboss::opt_dir {
''copy_to_1st'':
path => ''jboss_1'';
''copy_to_2nd'':
path => ''jboss_2'';
''copy_to_3rd'':
path => ''jboss_3'';
}
}
******************************************************
Not tested, but should work. At least it''s working for me in similar
fashion. Cheers!!
On Apr 12, 6:40 pm, Munna S <19.mu...@gmail.com>
wrote:> Hi Sans,
>
> This is my jboss.pp file
>
> class d_services::jboss {
> define opt_dir($path) {
> exec { "copy_${path}":
> path => [ ''/bin'',
''/usr/bin'' ],
> command => "cp
/etc/puppet/modules/dev_jboss_jeeva/opt/jboss/
>
jboss-4.2.3.GA/server/default/conf/props/jmx-console-users.properties/opt/${path}",
> onlyif => "test -d /opt/${path}",
> }
> }
>
> }
>
> this is my init.pp file
>
> class dev_jboss_jeeva {
> include d_services::jboss
> d_services::jboss::opt_dir {
> ''jboss_1'':
> path =>
''/opt/jboss/jboss-4.2.3.GA/server/default/conf/props/'';
> }
>
> }
>
> But i am still getting the error
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-13 17:49 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
I followed your steps. now i am getting below error
Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
dev_jboss_jeeva for vm-jeeva2.aircell.prod at
/etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
dev_jboss_jeeva for vm-jeeva2.aircell.prod at
/etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
(//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog from remote
server: Error 400 on SERVER: Could not find class dev_jboss_jeeva for
vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/jeeva_base.pp:2 on
node vm-jeeva2.aircell.prod
Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
(//vm-jeeva2.aircell.prod/Puppet) Using cached catalog
Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
(//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog; skipping run
Apr 13 17:43:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
dev_jboss_jeeva for vm-jeeva2.aircell.prod at
/etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
i have jeeva_base.pp file under /etc/puppet/manifests/nodes and below is
its content
--------------------------------
node jeeva_base {
include dev_jboss_jeeva
}
--------------------------------------
also i have a another .pp file by name vm-jeeva2 under
/etc/puppet/manifests/nodes and below is its content. we have seperate .pp
file for each server name. one server is vm-jeeva2.
------------------
node vm-jeeva2 inherits jeeva_base {
}
--------------------
what could be the problem ?
On Thu, Apr 12, 2012 at 2:47 PM, Sans <r.santanu.das@gmail.com> wrote:
> You probably getting: "file not found" or something like that?
It''s
> because you are trying to copy a file from one machine (i.e. puppet
> server) to another machine, your puppet agent, using "cp"
command.
> Puppet has file{} resource and "source" parameter for that. Other
than
> that, if not typo, I don''t see any gap between the source_path and
the
> dest_path in your "cp" command.
>
> Also, I think "class d_services::jboss" is wrong in your case.
You
> don''t have any "d_services" module, I suppose. Try this:
If "jmx-
> console-users.properties" is the file that your are trying to copy,
> then create a directory on your Puppet-master at "etc/puppet/modules/
> dev_jboss_jeeva/files" and put the configuration file(s) in there
> first. Then, use this:
>
>
>
> # /etc/puppet/modules/dev_jboss_jeeva/manifests/jboss.pp
> --------------------------------------------------------
>
> class dev_jboss_jeeva::jboss {
>
> define opt_dir($path) {
>
> $j_conf = ''jmx-console-users.properties''
>
> exec { "chk_${path}":
> path => [ ''/bin'',
''/usr/bin'' ],
> command => "test -d /opt/${path}",
> }
>
> file { "${path}_${j_conf}":
> name => "/opt/${path}/${j_conf}",
> mode => ''0644'', owner =>
''root'', group => ''root'',
> source =>
"puppet:///modules/dev_jboss_jeeva/${j_conf}",
> require => Exec[ "chk_${path}" ];
> }
> }
> }
>
>
> Now, suppose you are copying the file: jmx-console-users.properties to
> "/opt/jboss_1", "/opt/jboss_2" and
"/opt/jboss_3" on the agent (if
> available), change the init.pp like this:
>
>
>
> # /etc/puppet/modules/dev_jboss_jeeva/manifests/init.pp
> --------------------------------------------------------
> class copy_jboss_conf {
>
> include dev_jboss_jeeva::jboss
> dev_jboss_jeeva::jboss::opt_dir {
>
> ''copy_to_1st'':
> path => ''jboss_1'';
>
> ''copy_to_2nd'':
> path => ''jboss_2'';
>
> ''copy_to_3rd'':
> path => ''jboss_3'';
> }
> }
> ******************************************************
>
>
> Not tested, but should work. At least it''s working for me in
similar
> fashion. Cheers!!
>
>
>
> On Apr 12, 6:40 pm, Munna S <19.mu...@gmail.com> wrote:
> > Hi Sans,
> >
> > This is my jboss.pp file
> >
> > class d_services::jboss {
> > define opt_dir($path) {
> > exec { "copy_${path}":
> > path => [ ''/bin'',
''/usr/bin'' ],
> > command => "cp
/etc/puppet/modules/dev_jboss_jeeva/opt/jboss/
> >
>
jboss-4.2.3.GA/server/default/conf/props/jmx-console-users.properties/opt/${path}
> ",
> > onlyif => "test -d /opt/${path}",
> > }
> > }
> >
> > }
> >
> > this is my init.pp file
> >
> > class dev_jboss_jeeva {
> > include d_services::jboss
> > d_services::jboss::opt_dir {
> > ''jboss_1'':
> > path =>
''/opt/jboss/jboss-4.2.3.GA/server/default/conf/props/'';
> > }
> >
> > }
> >
> > But i am still getting the error
> >
>
> --
> You received this message because you are subscribed to the Google Groups
> "Puppet Users" group.
> To post to this group, send email to puppet-users@googlegroups.com.
> To unsubscribe from this group, send email to
> puppet-users+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/puppet-users?hl=en.
>
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
I don''t have *node-based* setup; all my configuration is
*module-based*, so
cannot comment on that but I assume it should have worked in the same way.
To make it plain and simple, could you please follow the steps below and
see if it works?
*On the puppet master:
*
- #* mkdir -p /etc/puppet/modules/jb_test/{manifests,files}*
- Add: *import ''modules''* to /etc/puppet/manifests/site.pp
- #* echo "import ''jb_test''" >>
/etc/puppet/manifests/modules.pp*
- #* cp /etc/group /etc/puppet/modules/jb_test/files/group.pp*
- Create this jb_config.pp: *
/etc/puppet/modules/dev_jboss_jeeva/manifests/jb_config.pp*
#
/etc/puppet/modules/dev_jboss_jeeva/manifests/jb_config.pp>
> class jb_test::jb_config {
>
> $j_conf = ''group.pp''
>
> define jb_dir($dir) {
> $jj_conf = "$jb_test::jb_config::j_conf"
>
> exec { "lnk_${dir}":
> path => [ ''/bin'',
''/usr/bin'' ],
> #command => "cp /tmp/${jj_conf} /opt/${path}/
&& rm
> /tmp/${jj_conf}",
> command => "ln -s /opt/jconf/${jj_conf}
/opt/${dir}/",
> onlyif => "test -d /opt/${dir}",
> }
> }
> }
- Create init.pp:* * *
/etc/puppet/modules/dev_jboss_jeeva/manifests/init.pp*
# /etc/puppet/modules/jb_test/manifests/init.pp>
> class cp_jboss_conf {
>
> include jb_test::jb_config
> $cp_file = "$jb_test::jb_config::j_conf"
> $conf_dir = ''/opt/j_config''
> #notify { "The file name is: ${cp_file}": }
>
> # create main config directory
> exec { ''mkdir_jconf'':
> path => [ ''/bin'',
''/usr/bin'' ],
> command => "mkdir -p ${conf_dir}",
> unless => "test -d ${conf_dir}",
> }
>
> file {
> "${cp_file}":
> name => "${conf_dir}/${cp_file}", mode =>
''0644'',
> owner => ''root'', group =>
''root'',
> source => "puppet:///modules/jb_test/${cp_file}",
> require => Exec[ ''mkdir_jconf'' ];
> }
>
> jb_test::jb_config::jb_dir {
>
> ''copy_to_1st'':
> dir => ''jboss_1'';
>
> ''copy_to_2nd'':
> dir => ''jboss_2'';
>
> ''copy_to_3rd'':
> dir => ''jboss_3'';
> }
> }
>
- Add this to: */etc/puppet/manifests/nodes.pp*
node vm-jeeva2 inherits jeeva_base {>
include cp_jboss_conf>
}>
*On the puppet agent:*
- #* mkdir -p /opt/jboss_{1,3}*
- #* puppetd --test
*
If everything goes right, then you will see these things on the client
machine:
1. */opt/j_config* is created, if already not there
2. *group.pp* is copied to */opt/j_config*
3. A symbolic link is created on the /opt/jboss_{1|3}: *group.pp ->
/opt/j_config/group.pp*
Hope, that will solve your problem. cheers!!
On Friday, April 13, 2012 6:49:47 PM UTC+1, Jeeva wrote:>
> I followed your steps. now i am getting below error
>
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
> dev_jboss_jeeva for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
> dev_jboss_jeeva for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog from remote
> server: Error 400 on SERVER: Could not find class dev_jboss_jeeva for
> vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/jeeva_base.pp:2 on
> node vm-jeeva2.aircell.prod
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
> (//vm-jeeva2.aircell.prod/Puppet) Using cached catalog
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog; skipping run
> Apr 13 17:43:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
> dev_jboss_jeeva for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
>
> i have jeeva_base.pp file under /etc/puppet/manifests/nodes and below is
> its content
> --------------------------------
> node jeeva_base {
> include dev_jboss_jeeva
> }
> --------------------------------------
>
> also i have a another .pp file by name vm-jeeva2 under
> /etc/puppet/manifests/nodes and below is its content. we have seperate .pp
> file for each server name. one server is vm-jeeva2.
> ------------------
> node vm-jeeva2 inherits jeeva_base {
> }
> --------------------
>
>
> what could be the problem ?
> On Thu, Apr 12, 2012 at 2:47 PM, Sans <r.santanu.das@gmail.com>
wrote:
>
>> You probably getting: "file not found" or something like
that? It''s
>> because you are trying to copy a file from one machine (i.e. puppet
>> server) to another machine, your puppet agent, using "cp"
command.
>> Puppet has file{} resource and "source" parameter for that.
Other than
>> that, if not typo, I don''t see any gap between the source_path
and the
>> dest_path in your "cp" command.
>>
>> Also, I think "class d_services::jboss" is wrong in your
case. You
>> don''t have any "d_services" module, I suppose. Try
this: If "jmx-
>> console-users.properties" is the file that your are trying to
copy,
>> then create a directory on your Puppet-master at
"etc/puppet/modules/
>> dev_jboss_jeeva/files" and put the configuration file(s) in there
>> first. Then, use this:
>>
>>
>>
>> # /etc/puppet/modules/dev_jboss_jeeva/manifests/jboss.pp
>> --------------------------------------------------------
>>
>> class dev_jboss_jeeva::jboss {
>>
>> define opt_dir($path) {
>>
>> $j_conf = ''jmx-console-users.properties''
>>
>> exec { "chk_${path}":
>> path => [ ''/bin'',
''/usr/bin'' ],
>> command => "test -d /opt/${path}",
>> }
>>
>> file { "${path}_${j_conf}":
>> name => "/opt/${path}/${j_conf}",
>> mode => ''0644'', owner =>
''root'', group => ''root'',
>> source =>
"puppet:///modules/dev_jboss_jeeva/${j_conf}",
>> require => Exec[ "chk_${path}" ];
>> }
>> }
>> }
>>
>>
>> Now, suppose you are copying the file: jmx-console-users.properties to
>> "/opt/jboss_1", "/opt/jboss_2" and
"/opt/jboss_3" on the agent (if
>> available), change the init.pp like this:
>>
>>
>>
>> # /etc/puppet/modules/dev_jboss_jeeva/manifests/init.pp
>> --------------------------------------------------------
>> class copy_jboss_conf {
>>
>> include dev_jboss_jeeva::jboss
>> dev_jboss_jeeva::jboss::opt_dir {
>>
>> ''copy_to_1st'':
>> path => ''jboss_1'';
>>
>> ''copy_to_2nd'':
>> path => ''jboss_2'';
>>
>> ''copy_to_3rd'':
>> path => ''jboss_3'';
>> }
>> }
>> ******************************************************
>>
>>
>> Not tested, but should work. At least it''s working for me in
similar
>> fashion. Cheers!!
>>
>>
>>
>> On Apr 12, 6:40 pm, Munna S <19.mu...@gmail.com> wrote:
>> > Hi Sans,
>> >
>> > This is my jboss.pp file
>> >
>> > class d_services::jboss {
>> > define opt_dir($path) {
>> > exec { "copy_${path}":
>> > path => [ ''/bin'',
''/usr/bin'' ],
>> > command => "cp
>> /etc/puppet/modules/dev_jboss_jeeva/opt/jboss/
>> >
>>
jboss-4.2.3.GA/server/default/conf/props/jmx-console-users.properties/opt/${path}<http://jboss-4.2.3.GA/server/default/conf/props/jmx-console-users.properties/opt/$%7Bpath%7D>
>> ",
>> > onlyif => "test -d /opt/${path}",
>> > }
>> > }
>> >
>> > }
>> >
>> > this is my init.pp file
>> >
>> > class dev_jboss_jeeva {
>> > include d_services::jboss
>> > d_services::jboss::opt_dir {
>> > ''jboss_1'':
>> > path =>
''/opt/jboss/jboss-4.2.3.GA/server/default/conf/props/'';
>> > }
>> >
>> > }
>> >
>> > But i am still getting the error
>> >
>>
>> --
>> You received this message because you are subscribed to the Google
Groups
>> "Puppet Users" group.
>> To post to this group, send email to puppet-users@googlegroups.com.
>> To unsubscribe from this group, send email to
>> puppet-users+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/puppet-users?hl=en.
>>
>>
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/puppet-users/-/msDfHxdoYjYJ.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
(I don''t have *node-based* setup (all my configuration is module-based)
so
can''t comment on that but I assume it should have worked that same way.
To
make it plain a and simple, could you follow the steps below and see if it
works?
*On the puppet-master:*
- # *mkdir -p /etc/puppet/modules/jb_test/{manifests,files}*
- #* echo "import ''jb_test''" >>
/etc/puppet/manifests/modules.pp*
- Add: *import ''modules''* to
*/etc/puppet/manifests/site.pp*
- #* cp /etc/group /etc/puppet/modules/jb_test/files/group_test*
- Create *jb_config.pp:**/etc/puppet/modules/jb_test/manifests/jb_config.pp
*
# /etc/puppet/modules/jb_test/manifests/jb_config.pp>
> class jb_test::jb_config {
>
> $j_conf = ''group_test''
>
> define jb_dir($dir) {
> $jj_conf = "$jb_test::jb_config::j_conf"
>
> exec { "lnk_${dir}":
> path => [ ''/bin'',
''/usr/bin'' ],
> command => "ln -s /opt/j_config/${jj_conf}
/opt/${dir}/",
> onlyif => "test -d /opt/${dir}",
> }
> }
> }
>
*
*
- Create* init.pp:* */etc/puppet/modules/jb_test/manifests/init.pp*
# /etc/puppet/modules/jb_test/manifests/init.pp>
> class cp_jboss_conf {
>
> include jb_test::jb_config
> $cp_file = "$jb_test::jb_config::j_conf"
> $conf_dir = ''/opt/j_config''
> #notify { "The file name is: ${cp_file}": }
>
> # create directory recursively
> exec { ''mkdir_jconf'':
> path => [ ''/bin'',
''/usr/bin'' ],
> command => "mkdir -p ${conf_dir}",
> unless => "test -d ${conf_dir}",
> }
>
> file {
> "${cp_file}":
> name => "${conf_dir}/${cp_file}", mode =>
''0644'',
> owner => ''root'', group =>
''root'',
> source => "puppet:///modules/jb_test/${cp_file}",
> require => Exec[ ''mkdir_jconf'' ];
> }
>
> jb_test::jb_config::jb_dir {
>
> ''copy_to_1st'':
> dir => ''jboss_1'';
>
> ''copy_to_2nd'':
> dir => ''jboss_2'';
>
> ''copy_to_3rd'':
> dir => ''jboss_3'';
> }
> }
>
**
- Modify *nodes.pp: **/etc/puppet/manifests/nodes.pp**
*
node ''vm-jeeva2'' inherits jeeva_base {> include cp_jboss_conf
> }
>
*On the puppet-agent:
*
- # *mkdir -p /opt/jboss_{1,3}*
- # *puppetd --test**
*
If every thing goes right (and I didn''t miss anything down the line),
you
see these things on the agent(s):
1. */opt/j_config* is created (if already not there)
2. The file:* group_test* is copied in the */opt/j_config*
3. A symbolic-link: *group_test -> /opt/j_config/group_test* is created
in each */opt/jboss_{1,3}*
*
*I think, that''s what you basically asked for. The only difference is
the
symbolic-link (as opposed to the "copy") in this setup. In stead of
the
sysm-link, you can first copy the file to the */root* (or somewhere secure,
if */tmp* is a security issue for the configuration file) and then copy the
file from */root* to */opt/jboss_{1,2,3}*, whichever is available.
Does it work for you? cheers!!
On Friday, April 13, 2012 6:49:47 PM UTC+1, Jeeva wrote:>
> I followed your steps. now i am getting below error
>
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
> dev_jboss_jeeva for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
> dev_jboss_jeeva for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog from remote
> server: Error 400 on SERVER: Could not find class dev_jboss_jeeva for
> vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/jeeva_base.pp:2 on
> node vm-jeeva2.aircell.prod
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
> (//vm-jeeva2.aircell.prod/Puppet) Using cached catalog
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog; skipping run
> Apr 13 17:43:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
> dev_jboss_jeeva for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
>
> i have jeeva_base.pp file under /etc/puppet/manifests/nodes and below is
> its content
> --------------------------------
> node jeeva_base {
> include dev_jboss_jeeva
> }
> --------------------------------------
>
> also i have a another .pp file by name vm-jeeva2 under
> /etc/puppet/manifests/nodes and below is its content. we have seperate .pp
> file for each server name. one server is vm-jeeva2.
> ------------------
> node vm-jeeva2 inherits jeeva_base {
> }
> --------------------
>
>
> what could be the problem ?
> On Thu, Apr 12, 2012 at 2:47 PM, Sans <r.santanu.das@gmail.com>
wrote:
>
>> You probably getting: "file not found" or something like
that? It''s
>> because you are trying to copy a file from one machine (i.e. puppet
>> server) to another machine, your puppet agent, using "cp"
command.
>> Puppet has file{} resource and "source" parameter for that.
Other than
>> that, if not typo, I don''t see any gap between the source_path
and the
>> dest_path in your "cp" command.
>>
>> Also, I think "class d_services::jboss" is wrong in your
case. You
>> don''t have any "d_services" module, I suppose. Try
this: If "jmx-
>> console-users.properties" is the file that your are trying to
copy,
>> then create a directory on your Puppet-master at
"etc/puppet/modules/
>> dev_jboss_jeeva/files" and put the configuration file(s) in there
>> first. Then, use this:
>>
>>
>>
>> # /etc/puppet/modules/dev_jboss_jeeva/manifests/jboss.pp
>> --------------------------------------------------------
>>
>> class dev_jboss_jeeva::jboss {
>>
>> define opt_dir($path) {
>>
>> $j_conf = ''jmx-console-users.properties''
>>
>> exec { "chk_${path}":
>> path => [ ''/bin'',
''/usr/bin'' ],
>> command => "test -d /opt/${path}",
>> }
>>
>> file { "${path}_${j_conf}":
>> name => "/opt/${path}/${j_conf}",
>> mode => ''0644'', owner =>
''root'', group => ''root'',
>> source =>
"puppet:///modules/dev_jboss_jeeva/${j_conf}",
>> require => Exec[ "chk_${path}" ];
>> }
>> }
>> }
>>
>>
>> Now, suppose you are copying the file: jmx-console-users.properties to
>> "/opt/jboss_1", "/opt/jboss_2" and
"/opt/jboss_3" on the agent (if
>> available), change the init.pp like this:
>>
>>
>>
>> # /etc/puppet/modules/dev_jboss_jeeva/manifests/init.pp
>> --------------------------------------------------------
>> class copy_jboss_conf {
>>
>> include dev_jboss_jeeva::jboss
>> dev_jboss_jeeva::jboss::opt_dir {
>>
>> ''copy_to_1st'':
>> path => ''jboss_1'';
>>
>> ''copy_to_2nd'':
>> path => ''jboss_2'';
>>
>> ''copy_to_3rd'':
>> path => ''jboss_3'';
>> }
>> }
>> ******************************************************
>>
>>
>> Not tested, but should work. At least it''s working for me in
similar
>> fashion. Cheers!!
>>
>>
>>
>> On Apr 12, 6:40 pm, Munna S <19.mu...@gmail.com> wrote:
>> > Hi Sans,
>> >
>> > This is my jboss.pp file
>> >
>> > class d_services::jboss {
>> > define opt_dir($path) {
>> > exec { "copy_${path}":
>> > path => [ ''/bin'',
''/usr/bin'' ],
>> > command => "cp
>> /etc/puppet/modules/dev_jboss_jeeva/opt/jboss/
>> >
>>
jboss-4.2.3.GA/server/default/conf/props/jmx-console-users.properties/opt/${path}<http://jboss-4.2.3.GA/server/default/conf/props/jmx-console-users.properties/opt/$%7Bpath%7D>
>> ",
>> > onlyif => "test -d /opt/${path}",
>> > }
>> > }
>> >
>> > }
>> >
>> > this is my init.pp file
>> >
>> > class dev_jboss_jeeva {
>> > include d_services::jboss
>> > d_services::jboss::opt_dir {
>> > ''jboss_1'':
>> > path =>
''/opt/jboss/jboss-4.2.3.GA/server/default/conf/props/'';
>> > }
>> >
>> > }
>> >
>> > But i am still getting the error
>> >
>>
>> --
>> You received this message because you are subscribed to the Google
Groups
>> "Puppet Users" group.
>> To post to this group, send email to puppet-users@googlegroups.com.
>> To unsubscribe from this group, send email to
>> puppet-users+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/puppet-users?hl=en.
>>
>>
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/puppet-users/-/edh-787g4UUJ.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
I don''t have *node-based* setup (all my configuration is module-based)
so
can''t comment on that but I assume it should have worked that same way.
To
make it plain a and simple, could you follow the steps below and see if it
works?
*On the puppet-master:*
- # *mkdir -p /etc/puppet/modules/jb_test/{manifests,files}*
- #* echo "import ''jb_test''" >>
/etc/puppet/manifests/modules.pp*
- Add: *import ''modules''* to
*/etc/puppet/manifests/site.pp*
- #* cp /etc/group /etc/puppet/modules/jb_test/files/group_test*
- Create *jb_config.pp:**/etc/puppet/modules/jb_test/manifests/jb_config.pp
*
# /etc/puppet/modules/jb_test/manifests/jb_config.pp>
> class jb_test::jb_config {
>
> $j_conf = ''group_test''
>
> define jb_dir($dir) {
> $jj_conf = "$jb_test::jb_config::j_conf"
>
> exec { "lnk_${dir}":
> path => [ ''/bin'',
''/usr/bin'' ],
> command => "ln -s /opt/j_config/${jj_conf}
/opt/${dir}/",
> onlyif => "test -d /opt/${dir}",
> }
> }
> }
>
*
*
- Create* init.pp:* */etc/puppet/modules/jb_test/manifests/init.pp*
# /etc/puppet/modules/jb_test/manifests/init.pp>
> class cp_jboss_conf {
>
> include jb_test::jb_config
> $cp_file = "$jb_test::jb_config::j_conf"
> $conf_dir = ''/opt/j_config''
> #notify { "The file name is: ${cp_file}": }
>
> # create directory recursively
> exec { ''mkdir_jconf'':
> path => [ ''/bin'',
''/usr/bin'' ],
> command => "mkdir -p ${conf_dir}",
> unless => "test -d ${conf_dir}",
> }
>
> file {
> "${cp_file}":
> name => "${conf_dir}/${cp_file}", mode =>
''0644'',
> owner => ''root'', group =>
''root'',
> source => "puppet:///modules/jb_test/${cp_file}",
> require => Exec[ ''mkdir_jconf'' ];
> }
>
> jb_test::jb_config::jb_dir {
>
> ''copy_to_1st'':
> dir => ''jboss_1'';
>
> ''copy_to_2nd'':
> dir => ''jboss_2'';
>
> ''copy_to_3rd'':
> dir => ''jboss_3'';
> }
> }
>
- Modify *nodes.pp: **/etc/puppet/manifests/nodes.pp**
*
node ''vm-jeeva2'' inherits jeeva_base {> include cp_jboss_conf
> }
>
*On the puppet-agent:
*
- # *mkdir -p /opt/jboss_{1,3}*
- # *puppetd --test**
*
If every thing goes right (and I didn''t miss anything down the line),
you
see these things on the agent(s):
1. */opt/j_config* is created (if already not there)
2. The file:* group_test* is copied in the */opt/j_config*
3. A symbolic-link: *group_test -> /opt/j_config/group_test* is created
in each */opt/jboss_{1,3}*
*
*I think, that''s what you basically asked for. The only difference is
the
symbolic-link (as opposed to the "copy") in this setup. In stead of
the
sysm-link, you can first copy the file to the */root* (or somewhere secure,
if */tmp* is a security issue for the configuration file) and then copy the
file from */root* to */opt/jboss_{1,2,3}*, whichever is available.
Does it work for you? cheers!!
On Friday, April 13, 2012 6:49:47 PM UTC+1, Jeeva wrote:>
> I followed your steps. now i am getting below error
>
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
> dev_jboss_jeeva for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
> dev_jboss_jeeva for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog from remote
> server: Error 400 on SERVER: Could not find class dev_jboss_jeeva for
> vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/jeeva_base.pp:2 on
> node vm-jeeva2.aircell.prod
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
> (//vm-jeeva2.aircell.prod/Puppet) Using cached catalog
> Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog; skipping run
> Apr 13 17:43:44 pil-vm-pup-01 puppet-master[7899]: Could not find class
> dev_jboss_jeeva for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/jeeva_base.pp:2 on node vm-jeeva2.aircell.prod
>
> i have jeeva_base.pp file under /etc/puppet/manifests/nodes and below is
> its content
> --------------------------------
> node jeeva_base {
> include dev_jboss_jeeva
> }
> --------------------------------------
>
> also i have a another .pp file by name vm-jeeva2 under
> /etc/puppet/manifests/nodes and below is its content. we have seperate .pp
> file for each server name. one server is vm-jeeva2.
> ------------------
> node vm-jeeva2 inherits jeeva_base {
> }
> --------------------
>
>
> what could be the problem ?
> On Thu, Apr 12, 2012 at 2:47 PM, Sans <r.santanu.das@gmail.com>
wrote:
>
>> You probably getting: "file not found" or something like
that? It''s
>> because you are trying to copy a file from one machine (i.e. puppet
>> server) to another machine, your puppet agent, using "cp"
command.
>> Puppet has file{} resource and "source" parameter for that.
Other than
>> that, if not typo, I don''t see any gap between the source_path
and the
>> dest_path in your "cp" command.
>>
>> Also, I think "class d_services::jboss" is wrong in your
case. You
>> don''t have any "d_services" module, I suppose. Try
this: If "jmx-
>> console-users.properties" is the file that your are trying to
copy,
>> then create a directory on your Puppet-master at
"etc/puppet/modules/
>> dev_jboss_jeeva/files" and put the configuration file(s) in there
>> first. Then, use this:
>>
>>
>>
>> # /etc/puppet/modules/dev_jboss_jeeva/manifests/jboss.pp
>> --------------------------------------------------------
>>
>> class dev_jboss_jeeva::jboss {
>>
>> define opt_dir($path) {
>>
>> $j_conf = ''jmx-console-users.properties''
>>
>> exec { "chk_${path}":
>> path => [ ''/bin'',
''/usr/bin'' ],
>> command => "test -d /opt/${path}",
>> }
>>
>> file { "${path}_${j_conf}":
>> name => "/opt/${path}/${j_conf}",
>> mode => ''0644'', owner =>
''root'', group => ''root'',
>> source =>
"puppet:///modules/dev_jboss_jeeva/${j_conf}",
>> require => Exec[ "chk_${path}" ];
>> }
>> }
>> }
>>
>>
>> Now, suppose you are copying the file: jmx-console-users.properties to
>> "/opt/jboss_1", "/opt/jboss_2" and
"/opt/jboss_3" on the agent (if
>> available), change the init.pp like this:
>>
>>
>>
>> # /etc/puppet/modules/dev_jboss_jeeva/manifests/init.pp
>> --------------------------------------------------------
>> class copy_jboss_conf {
>>
>> include dev_jboss_jeeva::jboss
>> dev_jboss_jeeva::jboss::opt_dir {
>>
>> ''copy_to_1st'':
>> path => ''jboss_1'';
>>
>> ''copy_to_2nd'':
>> path => ''jboss_2'';
>>
>> ''copy_to_3rd'':
>> path => ''jboss_3'';
>> }
>> }
>> ******************************************************
>>
>>
>> Not tested, but should work. At least it''s working for me in
similar
>> fashion. Cheers!!
>>
>>
>>
>> On Apr 12, 6:40 pm, Munna S <19.mu...@gmail.com> wrote:
>> > Hi Sans,
>> >
>> > This is my jboss.pp file
>> >
>> > class d_services::jboss {
>> > define opt_dir($path) {
>> > exec { "copy_${path}":
>> > path => [ ''/bin'',
''/usr/bin'' ],
>> > command => "cp
>> /etc/puppet/modules/dev_jboss_jeeva/opt/jboss/
>> >
>>
jboss-4.2.3.GA/server/default/conf/props/jmx-console-users.properties/opt/${path}<http://jboss-4.2.3.GA/server/default/conf/props/jmx-console-users.properties/opt/$%7Bpath%7D>
>> ",
>> > onlyif => "test -d /opt/${path}",
>> > }
>> > }
>> >
>> > }
>> >
>> > this is my init.pp file
>> >
>> > class dev_jboss_jeeva {
>> > include d_services::jboss
>> > d_services::jboss::opt_dir {
>> > ''jboss_1'':
>> > path =>
''/opt/jboss/jboss-4.2.3.GA/server/default/conf/props/'';
>> > }
>> >
>> > }
>> >
>> > But i am still getting the error
>> >
>>
>> --
>> You received this message because you are subscribed to the Google
Groups
>> "Puppet Users" group.
>> To post to this group, send email to puppet-users@googlegroups.com.
>> To unsubscribe from this group, send email to
>> puppet-users+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/puppet-users?hl=en.
>>
>>
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/puppet-users/-/DJgURZK09kcJ.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote:> I followed your steps. now i am getting below error > > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find class > dev_jboss_jeeva for vm-jeeva2.aircell.prod at...> i have jeeva_base.pp file under /etc/puppet/manifests/nodes and below is > its content > -------------------------------- > node jeeva_base { > include dev_jboss_jeeva} > > -------------------------------------- > > also i have a another .pp file by name vm-jeeva2 under > /etc/puppet/manifests/nodes and below is its content. we have seperate .pp > file for each server name. one server is vm-jeeva2. > ------------------ > node vm-jeeva2 inherits jeeva_base {} > > -------------------- > > what could be the problem ?Where is the class dev_jboss_jeeva defined? You mentioned above an ''init.pp'', which would be usual if you were using modules, but it does not seem like you are using modules. It sounds like the problem you are having is wholly outside of the complicated machinations of what you''re trying to do. It looks more like you have a much simpler class-loading problem. Here are a few things to try: * Comment out all of the stuff from dev_jboss_jeeva and replace it with a "warning" function call, to log that everything is working right: class dev_jboss_jeeva { warning("dev_jboss_jeeva has successfully loaded") } * Copy your class dev_jboss_jeeva { ... } right before the "node jeeva_base" and see if you see your warning message (I suggest warning instead of info because info sometimes requires using --verbose on the command line; warning will always show): class dev_jboss_jeeva { warning("dev_jboss_jeeva was here") } node jeeva_base { include dev_jboss_jeeva } If you see the message with the class defined right before the node, but not wherever else you have it, then you know the problem is that it is unable to actually find the class and you should give specifics about that instead. Wil -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
It''s definitely a class loading problem and I don''t think Jeeva is using "modules" at all. Jeeva: Could you pls try the things I said in my previous post and see if that works? Cheers!! On Monday, April 16, 2012 1:34:31 AM UTC+1, Wil Cooley wrote:> > On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote: > > I followed your steps. now i am getting below error > > > > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find class > > dev_jboss_jeeva for vm-jeeva2.aircell.prod at > > ... > > > i have jeeva_base.pp file under /etc/puppet/manifests/nodes and below is > > its content > > -------------------------------- > > node jeeva_base { > > include dev_jboss_jeeva} > > > > -------------------------------------- > > > > also i have a another .pp file by name vm-jeeva2 under > > /etc/puppet/manifests/nodes and below is its content. we have seperate > .pp > > file for each server name. one server is vm-jeeva2. > > ------------------ > > node vm-jeeva2 inherits jeeva_base {} > > > > -------------------- > > > > what could be the problem ? > > Where is the class dev_jboss_jeeva defined? You mentioned above an > ''init.pp'', which would be usual if you were using modules, but it does > not seem like you are using modules. > > It sounds like the problem you are having is wholly outside of the > complicated machinations of what you''re trying to do. It looks more > like you have a much simpler class-loading problem. > > Here are a few things to try: > * Comment out all of the stuff from dev_jboss_jeeva and replace it > with a "warning" function call, to log that everything is working > right: > class dev_jboss_jeeva { > warning("dev_jboss_jeeva has successfully loaded") > } > * Copy your class dev_jboss_jeeva { ... } right before the "node > jeeva_base" and see if you see your warning message (I suggest warning > instead of info because info sometimes requires using --verbose on the > command line; warning will always show): > class dev_jboss_jeeva { > warning("dev_jboss_jeeva was here") > } > node jeeva_base { > include dev_jboss_jeeva > } > > If you see the message with the class defined right before the node, > but not wherever else you have it, then you know the problem is that > it is unable to actually find the class and you should give specifics > about that instead. > > Wil-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/_Puid9FxhfAJ. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-16 10:54 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
Hi Sans i am trying it now. will let you know the output soon. Also in my site.pp i have the below content import ''nodes/*'' $puppetserver = ''puppet-server.domain.com'' I do have many modules , which works as expected. Thanks, Jeeva cat /etc/puppet/manifests/site.pp On Mon, Apr 16, 2012 at 5:36 AM, Sans <r.santanu.das@gmail.com> wrote:> It''s definitely a class loading problem and I don''t think Jeeva is using > "modules" at all. > > Jeeva: > Could you pls try the things I said in my previous post and see if that > works? Cheers!! > > > > On Monday, April 16, 2012 1:34:31 AM UTC+1, Wil Cooley wrote: >> >> On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote: >> > I followed your steps. now i am getting below error >> > >> > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find class >> > dev_jboss_jeeva for vm-jeeva2.aircell.prod at >> >> ... >> >> > i have jeeva_base.pp file under /etc/puppet/manifests/nodes and below >> is >> > its content >> > ------------------------------**-- >> > node jeeva_base { >> > include dev_jboss_jeeva} >> > >> > ------------------------------**-------- >> > >> > also i have a another .pp file by name vm-jeeva2 under >> > /etc/puppet/manifests/nodes and below is its content. we have seperate >> .pp >> > file for each server name. one server is vm-jeeva2. >> > ------------------ >> > node vm-jeeva2 inherits jeeva_base {} >> > >> > -------------------- >> > >> > what could be the problem ? >> >> Where is the class dev_jboss_jeeva defined? You mentioned above an >> ''init.pp'', which would be usual if you were using modules, but it does >> not seem like you are using modules. >> >> It sounds like the problem you are having is wholly outside of the >> complicated machinations of what you''re trying to do. It looks more >> like you have a much simpler class-loading problem. >> >> Here are a few things to try: >> * Comment out all of the stuff from dev_jboss_jeeva and replace it >> with a "warning" function call, to log that everything is working >> right: >> class dev_jboss_jeeva { >> warning("dev_jboss_jeeva has successfully loaded") >> } >> * Copy your class dev_jboss_jeeva { ... } right before the "node >> jeeva_base" and see if you see your warning message (I suggest warning >> instead of info because info sometimes requires using --verbose on the >> command line; warning will always show): >> class dev_jboss_jeeva { >> warning("dev_jboss_jeeva was here") >> } >> node jeeva_base { >> include dev_jboss_jeeva >> } >> >> If you see the message with the class defined right before the node, >> but not wherever else you have it, then you know the problem is that >> it is unable to actually find the class and you should give specifics >> about that instead. >> >> Wil > > -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/puppet-users/-/_Puid9FxhfAJ. > > To post to this group, send email to puppet-users@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-16 12:06 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
Hi Sans,
I followed your steps, but i am getting the same error again
Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class
cp_jboss_conf for vm-jeeva2.aircell.prod at
/etc/puppet/manifests/nodes/vm-jeeva2.aircell.prod.pp:2 on node
vm-jeeva2.aircell.prod
Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class
cp_jboss_conf for vm-jeeva2.aircell.prod at
/etc/puppet/manifests/nodes/vm-jeeva2.aircell.prod.pp:2 on node
vm-jeeva2.aircell.prod
Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]:
(//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog from remote
server: Error 400 on SERVER: Could not find class cp_jboss_conf for
vm-jeeva2.aircell.prod at
/etc/puppet/manifests/nodes/vm-jeeva2.aircell.prod.pp:2 on node
vm-jeeva2.aircell.prod
Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]:
(//vm-jeeva2.aircell.prod/Puppet) Using cached catalog
Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]:
(//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog; skipping run
@All, Just not to confuse anyone, currently my puppet server is working as
expected. i have lot of modules created and it works. This is how my
configuration is
1 ) my site.pp file is under /etc/puppet/manifest/site.pp and below is my
content
import ''nodes/*''
$puppetserver = ''puppet-server.domain.com''
2) All my modules is under below path
/etc/puppet/modules/
3) under below path i have all my .pp files . eg
/etc/puppet/manifests/nodes/server1.pp
/etc/puppet/manifests/nodes/server2.pp
/etc/puppet/manifests/nodes/server3.pp
/etc/puppet/manifests/nodes/server4.pp
addition to this i have a jeeva_base.pp file where i include all my
modules. below is the portion of its content
-----------------------------------
node jeeva_base {
include all_scripts
include dev_jboss_jeeva
}
---------------------------------------
below is the content of my server1.pp file . i have created individual .pp
file for each server which inherits jeeva_base node.
------------------------------------------
node server1 inherits jeeva_base {
}
-------------------------------------------
As i said above, this is my requirement.
we have 3 version of jboss running in our environment in different servers.
eg. jboss4 in server1, jboss5 in server2 , jboss6 in server3 , and no jboss
in server 4 , etc
on each server, jboss config file sits under different path.
eg: in server 1 it sits under /opt/jboss4/
in server 2 it sits under /opt/jboss5/
in server 3 it sits under /opt/jboss6/
in server 4 no jboss is running
now i have 3 different configuration file for each version of jboss which i
need to replace. eg.
file1, i need to replace it to jboss4
file2 , i need to replace it to jboss5
file3 , i need to replace it to jboss6
also we need to keep in mind that it should not create a files/folder on
server4 which doesnt have jboss.
Now i need a module which checks the jboss path on each server and should
replace the sepcific file if it finds the specific path. eg
if it finds /opt/jboss4, then it should replace file1, if it finds
/opt/jboss5, then replace file2 and so on. But if no jboss path is found
then dont perform any thing on that server.
As suggested by Gary ( initial conversation) , gary helped me to create the
custom facts. but it didnt work. Not sure what went wrong.
in general, my requirement is very simple. just do a check on each server
for specific path. if found, then copy/replace respective file , if not
found then dont perform any action on that server.
I hope i didnt confuse anyone.
Thanks,
Jeeva
On Mon, Apr 16, 2012 at 5:54 AM, Munna S <19.munna@gmail.com> wrote:
> Hi Sans
> i am trying it now. will let you know the output soon. Also in my site.pp
> i have the below content
>
> import ''nodes/*''
> $puppetserver = ''puppet-server.domain.com''
>
>
>
> I do have many modules , which works as expected.
>
> Thanks,
> Jeeva
>
> cat /etc/puppet/manifests/site.pp
> On Mon, Apr 16, 2012 at 5:36 AM, Sans <r.santanu.das@gmail.com>
wrote:
>
>> It''s definitely a class loading problem and I don''t
think Jeeva is using
>> "modules" at all.
>>
>> Jeeva:
>> Could you pls try the things I said in my previous post and see if that
>> works? Cheers!!
>>
>>
>>
>> On Monday, April 16, 2012 1:34:31 AM UTC+1, Wil Cooley wrote:
>>>
>>> On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote:
>>> > I followed your steps. now i am getting below error
>>> >
>>> > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not
find
>>> class
>>> > dev_jboss_jeeva for vm-jeeva2.aircell.prod at
>>>
>>> ...
>>>
>>> > i have jeeva_base.pp file under /etc/puppet/manifests/nodes
and below
>>> is
>>> > its content
>>> > ------------------------------**--
>>> > node jeeva_base {
>>> > include dev_jboss_jeeva}
>>> >
>>> > ------------------------------**--------
>>> >
>>> > also i have a another .pp file by name vm-jeeva2 under
>>> > /etc/puppet/manifests/nodes and below is its content. we have
seperate
>>> .pp
>>> > file for each server name. one server is vm-jeeva2.
>>> > ------------------
>>> > node vm-jeeva2 inherits jeeva_base {}
>>> >
>>> > --------------------
>>> >
>>> > what could be the problem ?
>>>
>>> Where is the class dev_jboss_jeeva defined? You mentioned above an
>>> ''init.pp'', which would be usual if you were using
modules, but it does
>>> not seem like you are using modules.
>>>
>>> It sounds like the problem you are having is wholly outside of the
>>> complicated machinations of what you''re trying to do. It
looks more
>>> like you have a much simpler class-loading problem.
>>>
>>> Here are a few things to try:
>>> * Comment out all of the stuff from dev_jboss_jeeva and replace
it
>>> with a "warning" function call, to log that everything is
working
>>> right:
>>> class dev_jboss_jeeva {
>>> warning("dev_jboss_jeeva has successfully loaded")
>>> }
>>> * Copy your class dev_jboss_jeeva { ... } right before the
"node
>>> jeeva_base" and see if you see your warning message (I suggest
warning
>>> instead of info because info sometimes requires using --verbose on
the
>>> command line; warning will always show):
>>> class dev_jboss_jeeva {
>>> warning("dev_jboss_jeeva was here")
>>> }
>>> node jeeva_base {
>>> include dev_jboss_jeeva
>>> }
>>>
>>> If you see the message with the class defined right before the
node,
>>> but not wherever else you have it, then you know the problem is
that
>>> it is unable to actually find the class and you should give
specifics
>>> about that instead.
>>>
>>> Wil
>>
>> --
>> You received this message because you are subscribed to the Google
Groups
>> "Puppet Users" group.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msg/puppet-users/-/_Puid9FxhfAJ.
>>
>> To post to this group, send email to puppet-users@googlegroups.com.
>> To unsubscribe from this group, send email to
>> puppet-users+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/puppet-users?hl=en.
>>
>
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
humm...... not sure but looks like couple of steps from my previous post
are missing.
Can you pls confirm that you have all of these:
1. The line: *import ''modules''* in
*/etc/puppet/manifests/site.pp*
2. The line: *import ''jb_test''* in*
/etc/puppet/manifests/modules.pp*
3. The file:* /etc/puppet/modules/jb_test/manifests/jb_config.pp*
4. The file:* /etc/puppet/modules/jb_test/manifests/init_config.pp*
5. The file:* /etc/puppet/modules/jb_test/files/group_test*
6. and finally, in the */etc/puppet/manifests/nodes.pp*
node ''vm-jeeva2'' {> include cp_jboss_conf
> }
(don''t add inherits jeeva_base for the time being)
Cheers!!
On Monday, April 16, 2012 1:06:59 PM UTC+1, Jeeva wrote:>
> Hi Sans,
>
> I followed your steps, but i am getting the same error again
>
> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class
> cp_jboss_conf for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/vm-jeeva2.aircell.prod.pp:2 on node
> vm-jeeva2.aircell.prod
> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class
> cp_jboss_conf for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/vm-jeeva2.aircell.prod.pp:2 on node
> vm-jeeva2.aircell.prod
> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog from remote
> server: Error 400 on SERVER: Could not find class cp_jboss_conf for
> vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/vm-jeeva2.aircell.prod.pp:2 on node
> vm-jeeva2.aircell.prod
> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]:
> (//vm-jeeva2.aircell.prod/Puppet) Using cached catalog
> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog; skipping run
>
> @All, Just not to confuse anyone, currently my puppet server is working as
> expected. i have lot of modules created and it works. This is how my
> configuration is
>
> 1 ) my site.pp file is under /etc/puppet/manifest/site.pp and below is my
> content
> import ''nodes/*''
> $puppetserver = ''puppet-server.domain.com''
>
> 2) All my modules is under below path
>
> /etc/puppet/modules/
>
> 3) under below path i have all my .pp files . eg
>
> /etc/puppet/manifests/nodes/server1.pp
> /etc/puppet/manifests/nodes/server2.pp
> /etc/puppet/manifests/nodes/server3.pp
> /etc/puppet/manifests/nodes/server4.pp
>
> addition to this i have a jeeva_base.pp file where i include all my
> modules. below is the portion of its content
> -----------------------------------
> node jeeva_base {
> include all_scripts
> include dev_jboss_jeeva
> }
> ---------------------------------------
> below is the content of my server1.pp file . i have created individual .pp
> file for each server which inherits jeeva_base node.
> ------------------------------------------
> node server1 inherits jeeva_base {
> }
> -------------------------------------------
>
> As i said above, this is my requirement.
>
> we have 3 version of jboss running in our environment in different
> servers. eg. jboss4 in server1, jboss5 in server2 , jboss6 in server3 , and
> no jboss in server 4 , etc
>
> on each server, jboss config file sits under different path.
> eg: in server 1 it sits under /opt/jboss4/
> in server 2 it sits under /opt/jboss5/
> in server 3 it sits under /opt/jboss6/
> in server 4 no jboss is running
>
> now i have 3 different configuration file for each version of jboss which
> i need to replace. eg.
> file1, i need to replace it to jboss4
> file2 , i need to replace it to jboss5
> file3 , i need to replace it to jboss6
> also we need to keep in mind that it should not create a files/folder on
> server4 which doesnt have jboss.
>
> Now i need a module which checks the jboss path on each server and should
> replace the sepcific file if it finds the specific path. eg
>
> if it finds /opt/jboss4, then it should replace file1, if it finds
> /opt/jboss5, then replace file2 and so on. But if no jboss path is found
> then dont perform any thing on that server.
>
> As suggested by Gary ( initial conversation) , gary helped me to create
> the custom facts. but it didnt work. Not sure what went wrong.
> in general, my requirement is very simple. just do a check on each server
> for specific path. if found, then copy/replace respective file , if not
> found then dont perform any action on that server.
> I hope i didnt confuse anyone.
>
> Thanks,
> Jeeva
>
>
>
> On Mon, Apr 16, 2012 at 5:54 AM, Munna S <19.munna@gmail.com> wrote:
>
>> Hi Sans
>> i am trying it now. will let you know the output soon. Also in my
site.pp
>> i have the below content
>>
>> import ''nodes/*''
>> $puppetserver = ''puppet-server.domain.com''
>>
>>
>>
>> I do have many modules , which works as expected.
>>
>> Thanks,
>> Jeeva
>>
>> cat /etc/puppet/manifests/site.pp
>> On Mon, Apr 16, 2012 at 5:36 AM, Sans <r.santanu.das@gmail.com>
wrote:
>>
>>> It''s definitely a class loading problem and I
don''t think Jeeva is using
>>> "modules" at all.
>>>
>>> Jeeva:
>>> Could you pls try the things I said in my previous post and see if
that
>>> works? Cheers!!
>>>
>>>
>>>
>>> On Monday, April 16, 2012 1:34:31 AM UTC+1, Wil Cooley wrote:
>>>>
>>>> On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote:
>>>> > I followed your steps. now i am getting below error
>>>> >
>>>> > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could
not find
>>>> class
>>>> > dev_jboss_jeeva for vm-jeeva2.aircell.prod at
>>>>
>>>> ...
>>>>
>>>> > i have jeeva_base.pp file under
/etc/puppet/manifests/nodes and below
>>>> is
>>>> > its content
>>>> > ------------------------------**--
>>>> > node jeeva_base {
>>>> > include dev_jboss_jeeva}
>>>> >
>>>> > ------------------------------**--------
>>>> >
>>>> > also i have a another .pp file by name vm-jeeva2 under
>>>> > /etc/puppet/manifests/nodes and below is its content. we
have
>>>> seperate .pp
>>>> > file for each server name. one server is vm-jeeva2.
>>>> > ------------------
>>>> > node vm-jeeva2 inherits jeeva_base {}
>>>> >
>>>> > --------------------
>>>> >
>>>> > what could be the problem ?
>>>>
>>>> Where is the class dev_jboss_jeeva defined? You mentioned above
an
>>>> ''init.pp'', which would be usual if you were
using modules, but it does
>>>> not seem like you are using modules.
>>>>
>>>> It sounds like the problem you are having is wholly outside of
the
>>>> complicated machinations of what you''re trying to do.
It looks more
>>>> like you have a much simpler class-loading problem.
>>>>
>>>> Here are a few things to try:
>>>> * Comment out all of the stuff from dev_jboss_jeeva and
replace it
>>>> with a "warning" function call, to log that
everything is working
>>>> right:
>>>> class dev_jboss_jeeva {
>>>> warning("dev_jboss_jeeva has successfully
loaded")
>>>> }
>>>> * Copy your class dev_jboss_jeeva { ... } right before the
"node
>>>> jeeva_base" and see if you see your warning message (I
suggest warning
>>>> instead of info because info sometimes requires using --verbose
on the
>>>> command line; warning will always show):
>>>> class dev_jboss_jeeva {
>>>> warning("dev_jboss_jeeva was here")
>>>> }
>>>> node jeeva_base {
>>>> include dev_jboss_jeeva
>>>> }
>>>>
>>>> If you see the message with the class defined right before the
node,
>>>> but not wherever else you have it, then you know the problem is
that
>>>> it is unable to actually find the class and you should give
specifics
>>>> about that instead.
>>>>
>>>> Wil
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Puppet Users" group.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msg/puppet-users/-/_Puid9FxhfAJ.
>>>
>>> To post to this group, send email to puppet-users@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> puppet-users+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/puppet-users?hl=en.
>>>
>>
>>
>
On Monday, April 16, 2012 1:06:59 PM UTC+1, Jeeva wrote:>
> Hi Sans,
>
> I followed your steps, but i am getting the same error again
>
> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class
> cp_jboss_conf for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/vm-jeeva2.aircell.prod.pp:2 on node
> vm-jeeva2.aircell.prod
> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class
> cp_jboss_conf for vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/vm-jeeva2.aircell.prod.pp:2 on node
> vm-jeeva2.aircell.prod
> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog from remote
> server: Error 400 on SERVER: Could not find class cp_jboss_conf for
> vm-jeeva2.aircell.prod at
> /etc/puppet/manifests/nodes/vm-jeeva2.aircell.prod.pp:2 on node
> vm-jeeva2.aircell.prod
> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]:
> (//vm-jeeva2.aircell.prod/Puppet) Using cached catalog
> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]:
> (//vm-jeeva2.aircell.prod/Puppet) Could not retrieve catalog; skipping run
>
> @All, Just not to confuse anyone, currently my puppet server is working as
> expected. i have lot of modules created and it works. This is how my
> configuration is
>
> 1 ) my site.pp file is under /etc/puppet/manifest/site.pp and below is my
> content
> import ''nodes/*''
> $puppetserver = ''puppet-server.domain.com''
>
> 2) All my modules is under below path
>
> /etc/puppet/modules/
>
> 3) under below path i have all my .pp files . eg
>
> /etc/puppet/manifests/nodes/server1.pp
> /etc/puppet/manifests/nodes/server2.pp
> /etc/puppet/manifests/nodes/server3.pp
> /etc/puppet/manifests/nodes/server4.pp
>
> addition to this i have a jeeva_base.pp file where i include all my
> modules. below is the portion of its content
> -----------------------------------
> node jeeva_base {
> include all_scripts
> include dev_jboss_jeeva
> }
> ---------------------------------------
> below is the content of my server1.pp file . i have created individual .pp
> file for each server which inherits jeeva_base node.
> ------------------------------------------
> node server1 inherits jeeva_base {
> }
> -------------------------------------------
>
> As i said above, this is my requirement.
>
> we have 3 version of jboss running in our environment in different
> servers. eg. jboss4 in server1, jboss5 in server2 , jboss6 in server3 , and
> no jboss in server 4 , etc
>
> on each server, jboss config file sits under different path.
> eg: in server 1 it sits under /opt/jboss4/
> in server 2 it sits under /opt/jboss5/
> in server 3 it sits under /opt/jboss6/
> in server 4 no jboss is running
>
> now i have 3 different configuration file for each version of jboss which
> i need to replace. eg.
> file1, i need to replace it to jboss4
> file2 , i need to replace it to jboss5
> file3 , i need to replace it to jboss6
> also we need to keep in mind that it should not create a files/folder on
> server4 which doesnt have jboss.
>
> Now i need a module which checks the jboss path on each server and should
> replace the sepcific file if it finds the specific path. eg
>
> if it finds /opt/jboss4, then it should replace file1, if it finds
> /opt/jboss5, then replace file2 and so on. But if no jboss path is found
> then dont perform any thing on that server.
>
> As suggested by Gary ( initial conversation) , gary helped me to create
> the custom facts. but it didnt work. Not sure what went wrong.
> in general, my requirement is very simple. just do a check on each server
> for specific path. if found, then copy/replace respective file , if not
> found then dont perform any action on that server.
> I hope i didnt confuse anyone.
>
> Thanks,
> Jeeva
>
>
>
> On Mon, Apr 16, 2012 at 5:54 AM, Munna S <19.munna@gmail.com> wrote:
>
>> Hi Sans
>> i am trying it now. will let you know the output soon. Also in my
site.pp
>> i have the below content
>>
>> import ''nodes/*''
>> $puppetserver = ''puppet-server.domain.com''
>>
>>
>>
>> I do have many modules , which works as expected.
>>
>> Thanks,
>> Jeeva
>>
>> cat /etc/puppet/manifests/site.pp
>> On Mon, Apr 16, 2012 at 5:36 AM, Sans <r.santanu.das@gmail.com>
wrote:
>>
>>> It''s definitely a class loading problem and I
don''t think Jeeva is using
>>> "modules" at all.
>>>
>>> Jeeva:
>>> Could you pls try the things I said in my previous post and see if
that
>>> works? Cheers!!
>>>
>>>
>>>
>>> On Monday, April 16, 2012 1:34:31 AM UTC+1, Wil Cooley wrote:
>>>>
>>>> On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote:
>>>> > I followed your steps. now i am getting below error
>>>> >
>>>> > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could
not find
>>>> class
>>>> > dev_jboss_jeeva for vm-jeeva2.aircell.prod at
>>>>
>>>> ...
>>>>
>>>> > i have jeeva_base.pp file under
/etc/puppet/manifests/nodes and below
>>>> is
>>>> > its content
>>>> > ------------------------------**--
>>>> > node jeeva_base {
>>>> > include dev_jboss_jeeva}
>>>> >
>>>> > ------------------------------**--------
>>>> >
>>>> > also i have a another .pp file by name vm-jeeva2 under
>>>> > /etc/puppet/manifests/nodes and below is its content. we
have
>>>> seperate .pp
>>>> > file for each server name. one server is vm-jeeva2.
>>>> > ------------------
>>>> > node vm-jeeva2 inherits jeeva_base {}
>>>> >
>>>> > --------------------
>>>> >
>>>> > what could be the problem ?
>>>>
>>>> Where is the class dev_jboss_jeeva defined? You mentioned above
an
>>>> ''init.pp'', which would be usual if you were
using modules, but it does
>>>> not seem like you are using modules.
>>>>
>>>> It sounds like the problem you are having is wholly outside of
the
>>>> complicated machinations of what you''re trying to do.
It looks more
>>>> like you have a much simpler class-loading problem.
>>>>
>>>> Here are a few things to try:
>>>> * Comment out all of the stuff from dev_jboss_jeeva and
replace it
>>>> with a "warning" function call, to log that
everything is working
>>>> right:
>>>> class dev_jboss_jeeva {
>>>> warning("dev_jboss_jeeva has successfully
loaded")
>>>> }
>>>> * Copy your class dev_jboss_jeeva { ... } right before the
"node
>>>> jeeva_base" and see if you see your warning message (I
suggest warning
>>>> instead of info because info sometimes requires using --verbose
on the
>>>> command line; warning will always show):
>>>> class dev_jboss_jeeva {
>>>> warning("dev_jboss_jeeva was here")
>>>> }
>>>> node jeeva_base {
>>>> include dev_jboss_jeeva
>>>> }
>>>>
>>>> If you see the message with the class defined right before the
node,
>>>> but not wherever else you have it, then you know the problem is
that
>>>> it is unable to actually find the class and you should give
specifics
>>>> about that instead.
>>>>
>>>> Wil
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Puppet Users" group.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msg/puppet-users/-/_Puid9FxhfAJ.
>>>
>>> To post to this group, send email to puppet-users@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> puppet-users+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/puppet-users?hl=en.
>>>
>>
>>
>
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/puppet-users/-/n1-iTusITgQJ.
To post to this group, send email to puppet-users@googlegroups.com.
To unsubscribe from this group, send email to
puppet-users+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-16 12:59 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
1. The line: *import ''modules''* in */etc/puppet/manifests/site.pp - i do have site.pp file but dont have the entry for modules. i added the entry but later i saw lot of errors related to modules in log * 2. The line: *import ''jb_test''* in* /etc/puppet/manifests/modules.pp - i dont have modules.pp file. But as i said in my previous email, i have customised servername.pp siles * 3. The file:* /etc/puppet/modules/jb_test/manifests/jb_config.pp - i created this file * 4. The file:* /etc/puppet/modules/jb_test/manifests/init_config.pp - i created this file * 5. The file:* /etc/puppet/modules/jb_test/files/group_test - i have this file* 6. and finally, in the */etc/puppet/manifests/nodes.pp - I dont have this file in my configuration* On Mon, Apr 16, 2012 at 7:38 AM, Sans <r.santanu.das@gmail.com> wrote:> humm...... not sure but looks like couple of steps from my previous post > are missing. > Can you pls confirm that you have all of these: > > > 1. The line: *import ''modules''* in */etc/puppet/manifests/site.pp* > 2. The line: *import ''jb_test''* in* /etc/puppet/manifests/modules.pp* > 3. The file:* /etc/puppet/modules/jb_test/manifests/jb_config.pp* > 4. The file:* /etc/puppet/modules/jb_test/manifests/init_config.pp* > 5. The file:* /etc/puppet/modules/jb_test/files/group_test* > 6. and finally, in the */etc/puppet/manifests/nodes.pp* > > node ''vm-jeeva2'' { >> include cp_jboss_conf >> } > > > (don''t add inherits jeeva_base for the time being) > > Cheers!! > > > > > On Monday, April 16, 2012 1:06:59 PM UTC+1, Jeeva wrote: >> >> Hi Sans, >> >> I followed your steps, but i am getting the same error again >> >> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/* >> *vm-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/* >> *vm-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >> (//vm-jeeva2.aircell.prod/**Puppet) Could not retrieve catalog from >> remote server: Error 400 on SERVER: Could not find class cp_jboss_conf for >> vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/**vm-jeeva2.aircell.prod.pp:2 >> on node vm-jeeva2.aircell.prod >> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >> (//vm-jeeva2.aircell.prod/**Puppet) Using cached catalog >> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >> (//vm-jeeva2.aircell.prod/**Puppet) Could not retrieve catalog; skipping >> run >> >> @All, Just not to confuse anyone, currently my puppet server is working >> as expected. i have lot of modules created and it works. This is how my >> configuration is >> >> 1 ) my site.pp file is under /etc/puppet/manifest/site.pp and below is my >> content >> import ''nodes/*'' >> $puppetserver = ''puppet-server.domain.com'' >> >> 2) All my modules is under below path >> >> /etc/puppet/modules/ >> >> 3) under below path i have all my .pp files . eg >> >> /etc/puppet/manifests/nodes/**server1.pp >> /etc/puppet/manifests/nodes/**server2.pp >> /etc/puppet/manifests/nodes/**server3.pp >> /etc/puppet/manifests/nodes/**server4.pp >> >> addition to this i have a jeeva_base.pp file where i include all my >> modules. below is the portion of its content >> ------------------------------**----- >> node jeeva_base { >> include all_scripts >> include dev_jboss_jeeva >> } >> ------------------------------**--------- >> below is the content of my server1.pp file . i have created individual >> .pp file for each server which inherits jeeva_base node. >> ------------------------------**------------ >> node server1 inherits jeeva_base { >> } >> ------------------------------**------------- >> >> As i said above, this is my requirement. >> >> we have 3 version of jboss running in our environment in different >> servers. eg. jboss4 in server1, jboss5 in server2 , jboss6 in server3 , and >> no jboss in server 4 , etc >> >> on each server, jboss config file sits under different path. >> eg: in server 1 it sits under /opt/jboss4/ >> in server 2 it sits under /opt/jboss5/ >> in server 3 it sits under /opt/jboss6/ >> in server 4 no jboss is running >> >> now i have 3 different configuration file for each version of jboss which >> i need to replace. eg. >> file1, i need to replace it to jboss4 >> file2 , i need to replace it to jboss5 >> file3 , i need to replace it to jboss6 >> also we need to keep in mind that it should not create a files/folder on >> server4 which doesnt have jboss. >> >> Now i need a module which checks the jboss path on each server and should >> replace the sepcific file if it finds the specific path. eg >> >> if it finds /opt/jboss4, then it should replace file1, if it finds >> /opt/jboss5, then replace file2 and so on. But if no jboss path is found >> then dont perform any thing on that server. >> >> As suggested by Gary ( initial conversation) , gary helped me to create >> the custom facts. but it didnt work. Not sure what went wrong. >> in general, my requirement is very simple. just do a check on each server >> for specific path. if found, then copy/replace respective file , if not >> found then dont perform any action on that server. >> I hope i didnt confuse anyone. >> >> Thanks, >> Jeeva >> >> >> >> On Mon, Apr 16, 2012 at 5:54 AM, Munna S <19.munna@gmail.com> wrote: >> >>> Hi Sans >>> i am trying it now. will let you know the output soon. Also in my >>> site.pp i have the below content >>> >>> import ''nodes/*'' >>> $puppetserver = ''puppet-server.domain.com'' >>> >>> >>> >>> I do have many modules , which works as expected. >>> >>> Thanks, >>> Jeeva >>> >>> cat /etc/puppet/manifests/site.pp >>> On Mon, Apr 16, 2012 at 5:36 AM, Sans <r.santanu.das@gmail.com> wrote: >>> >>>> It''s definitely a class loading problem and I don''t think Jeeva is >>>> using "modules" at all. >>>> >>>> Jeeva: >>>> Could you pls try the things I said in my previous post and see if that >>>> works? Cheers!! >>>> >>>> >>>> >>>> On Monday, April 16, 2012 1:34:31 AM UTC+1, Wil Cooley wrote: >>>>> >>>>> On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote: >>>>> > I followed your steps. now i am getting below error >>>>> > >>>>> > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find >>>>> class >>>>> > dev_jboss_jeeva for vm-jeeva2.aircell.prod at >>>>> >>>>> ... >>>>> >>>>> > i have jeeva_base.pp file under /etc/puppet/manifests/nodes and >>>>> below is >>>>> > its content >>>>> > ------------------------------****-- >>>>> > node jeeva_base { >>>>> > include dev_jboss_jeeva} >>>>> > >>>>> > ------------------------------****-------- >>>>> > >>>>> > also i have a another .pp file by name vm-jeeva2 under >>>>> > /etc/puppet/manifests/nodes and below is its content. we have >>>>> seperate .pp >>>>> > file for each server name. one server is vm-jeeva2. >>>>> > ------------------ >>>>> > node vm-jeeva2 inherits jeeva_base {} >>>>> > >>>>> > -------------------- >>>>> > >>>>> > what could be the problem ? >>>>> >>>>> Where is the class dev_jboss_jeeva defined? You mentioned above an >>>>> ''init.pp'', which would be usual if you were using modules, but it does >>>>> not seem like you are using modules. >>>>> >>>>> It sounds like the problem you are having is wholly outside of the >>>>> complicated machinations of what you''re trying to do. It looks more >>>>> like you have a much simpler class-loading problem. >>>>> >>>>> Here are a few things to try: >>>>> * Comment out all of the stuff from dev_jboss_jeeva and replace it >>>>> with a "warning" function call, to log that everything is working >>>>> right: >>>>> class dev_jboss_jeeva { >>>>> warning("dev_jboss_jeeva has successfully loaded") >>>>> } >>>>> * Copy your class dev_jboss_jeeva { ... } right before the "node >>>>> jeeva_base" and see if you see your warning message (I suggest warning >>>>> instead of info because info sometimes requires using --verbose on the >>>>> command line; warning will always show): >>>>> class dev_jboss_jeeva { >>>>> warning("dev_jboss_jeeva was here") >>>>> } >>>>> node jeeva_base { >>>>> include dev_jboss_jeeva >>>>> } >>>>> >>>>> If you see the message with the class defined right before the node, >>>>> but not wherever else you have it, then you know the problem is that >>>>> it is unable to actually find the class and you should give specifics >>>>> about that instead. >>>>> >>>>> Wil >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Puppet Users" group. >>>> To view this discussion on the web visit https://groups.google.com/d/** >>>> msg/puppet-users/-/_**Puid9FxhfAJ<https://groups.google.com/d/msg/puppet-users/-/_Puid9FxhfAJ> >>>> . >>>> >>>> To post to this group, send email to puppet-users@googlegroups.com. >>>> To unsubscribe from this group, send email to puppet-users+unsubscribe@ >>>> **googlegroups.com <puppet-users%2Bunsubscribe@googlegroups.com>. >>>> For more options, visit this group at http://groups.google.com/** >>>> group/puppet-users?hl=en<http://groups.google.com/group/puppet-users?hl=en> >>>> . >>>> >>> >>> >> > On Monday, April 16, 2012 1:06:59 PM UTC+1, Jeeva wrote: >> >> Hi Sans, >> >> I followed your steps, but i am getting the same error again >> >> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/* >> *vm-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/* >> *vm-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >> (//vm-jeeva2.aircell.prod/**Puppet) Could not retrieve catalog from >> remote server: Error 400 on SERVER: Could not find class cp_jboss_conf for >> vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/**vm-jeeva2.aircell.prod.pp:2 >> on node vm-jeeva2.aircell.prod >> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >> (//vm-jeeva2.aircell.prod/**Puppet) Using cached catalog >> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >> (//vm-jeeva2.aircell.prod/**Puppet) Could not retrieve catalog; skipping >> run >> >> @All, Just not to confuse anyone, currently my puppet server is working >> as expected. i have lot of modules created and it works. This is how my >> configuration is >> >> 1 ) my site.pp file is under /etc/puppet/manifest/site.pp and below is my >> content >> import ''nodes/*'' >> $puppetserver = ''puppet-server.domain.com'' >> >> 2) All my modules is under below path >> >> /etc/puppet/modules/ >> >> 3) under below path i have all my .pp files . eg >> >> /etc/puppet/manifests/nodes/**server1.pp >> /etc/puppet/manifests/nodes/**server2.pp >> /etc/puppet/manifests/nodes/**server3.pp >> /etc/puppet/manifests/nodes/**server4.pp >> >> addition to this i have a jeeva_base.pp file where i include all my >> modules. below is the portion of its content >> ------------------------------**----- >> node jeeva_base { >> include all_scripts >> include dev_jboss_jeeva >> } >> ------------------------------**--------- >> below is the content of my server1.pp file . i have created individual >> .pp file for each server which inherits jeeva_base node. >> ------------------------------**------------ >> node server1 inherits jeeva_base { >> } >> ------------------------------**------------- >> >> As i said above, this is my requirement. >> >> we have 3 version of jboss running in our environment in different >> servers. eg. jboss4 in server1, jboss5 in server2 , jboss6 in server3 , and >> no jboss in server 4 , etc >> >> on each server, jboss config file sits under different path. >> eg: in server 1 it sits under /opt/jboss4/ >> in server 2 it sits under /opt/jboss5/ >> in server 3 it sits under /opt/jboss6/ >> in server 4 no jboss is running >> >> now i have 3 different configuration file for each version of jboss which >> i need to replace. eg. >> file1, i need to replace it to jboss4 >> file2 , i need to replace it to jboss5 >> file3 , i need to replace it to jboss6 >> also we need to keep in mind that it should not create a files/folder on >> server4 which doesnt have jboss. >> >> Now i need a module which checks the jboss path on each server and should >> replace the sepcific file if it finds the specific path. eg >> >> if it finds /opt/jboss4, then it should replace file1, if it finds >> /opt/jboss5, then replace file2 and so on. But if no jboss path is found >> then dont perform any thing on that server. >> >> As suggested by Gary ( initial conversation) , gary helped me to create >> the custom facts. but it didnt work. Not sure what went wrong. >> in general, my requirement is very simple. just do a check on each server >> for specific path. if found, then copy/replace respective file , if not >> found then dont perform any action on that server. >> I hope i didnt confuse anyone. >> >> Thanks, >> Jeeva >> >> >> >> On Mon, Apr 16, 2012 at 5:54 AM, Munna S <19.munna@gmail.com> wrote: >> >>> Hi Sans >>> i am trying it now. will let you know the output soon. Also in my >>> site.pp i have the below content >>> >>> import ''nodes/*'' >>> $puppetserver = ''puppet-server.domain.com'' >>> >>> >>> >>> I do have many modules , which works as expected. >>> >>> Thanks, >>> Jeeva >>> >>> cat /etc/puppet/manifests/site.pp >>> On Mon, Apr 16, 2012 at 5:36 AM, Sans <r.santanu.das@gmail.com> wrote: >>> >>>> It''s definitely a class loading problem and I don''t think Jeeva is >>>> using "modules" at all. >>>> >>>> Jeeva: >>>> Could you pls try the things I said in my previous post and see if that >>>> works? Cheers!! >>>> >>>> >>>> >>>> On Monday, April 16, 2012 1:34:31 AM UTC+1, Wil Cooley wrote: >>>>> >>>>> On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote: >>>>> > I followed your steps. now i am getting below error >>>>> > >>>>> > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find >>>>> class >>>>> > dev_jboss_jeeva for vm-jeeva2.aircell.prod at >>>>> >>>>> ... >>>>> >>>>> > i have jeeva_base.pp file under /etc/puppet/manifests/nodes and >>>>> below is >>>>> > its content >>>>> > ------------------------------****-- >>>>> > node jeeva_base { >>>>> > include dev_jboss_jeeva} >>>>> > >>>>> > ------------------------------****-------- >>>>> > >>>>> > also i have a another .pp file by name vm-jeeva2 under >>>>> > /etc/puppet/manifests/nodes and below is its content. we have >>>>> seperate .pp >>>>> > file for each server name. one server is vm-jeeva2. >>>>> > ------------------ >>>>> > node vm-jeeva2 inherits jeeva_base {} >>>>> > >>>>> > -------------------- >>>>> > >>>>> > what could be the problem ? >>>>> >>>>> Where is the class dev_jboss_jeeva defined? You mentioned above an >>>>> ''init.pp'', which would be usual if you were using modules, but it does >>>>> not seem like you are using modules. >>>>> >>>>> It sounds like the problem you are having is wholly outside of the >>>>> complicated machinations of what you''re trying to do. It looks more >>>>> like you have a much simpler class-loading problem. >>>>> >>>>> Here are a few things to try: >>>>> * Comment out all of the stuff from dev_jboss_jeeva and replace it >>>>> with a "warning" function call, to log that everything is working >>>>> right: >>>>> class dev_jboss_jeeva { >>>>> warning("dev_jboss_jeeva has successfully loaded") >>>>> } >>>>> * Copy your class dev_jboss_jeeva { ... } right before the "node >>>>> jeeva_base" and see if you see your warning message (I suggest warning >>>>> instead of info because info sometimes requires using --verbose on the >>>>> command line; warning will always show): >>>>> class dev_jboss_jeeva { >>>>> warning("dev_jboss_jeeva was here") >>>>> } >>>>> node jeeva_base { >>>>> include dev_jboss_jeeva >>>>> } >>>>> >>>>> If you see the message with the class defined right before the node, >>>>> but not wherever else you have it, then you know the problem is that >>>>> it is unable to actually find the class and you should give specifics >>>>> about that instead. >>>>> >>>>> Wil >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Puppet Users" group. >>>> To view this discussion on the web visit https://groups.google.com/d/** >>>> msg/puppet-users/-/_**Puid9FxhfAJ<https://groups.google.com/d/msg/puppet-users/-/_Puid9FxhfAJ> >>>> . >>>> >>>> To post to this group, send email to puppet-users@googlegroups.com. >>>> To unsubscribe from this group, send email to puppet-users+unsubscribe@ >>>> **googlegroups.com <puppet-users%2Bunsubscribe@googlegroups.com>. >>>> For more options, visit this group at http://groups.google.com/** >>>> group/puppet-users?hl=en<http://groups.google.com/group/puppet-users?hl=en> >>>> . >>>> >>> >>> >> -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/puppet-users/-/n1-iTusITgQJ. > > To post to this group, send email to puppet-users@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
According to your configuration, I don''t think my code will work at all. Your setup is quite different then mine and I''ve no other suggestions for you at the moment. Hopefully, someone else will pick it up from here. Cheers!! On Monday, April 16, 2012 1:59:25 PM UTC+1, Jeeva wrote:> > > 1. The line: *import ''modules''* in */etc/puppet/manifests/site.pp > - i do have site.pp file but dont have the entry for modules. i added > the entry but later i saw lot of errors related to modules in log > * > 2. The line: *import ''jb_test''* in* /etc/puppet/manifests/modules.pp > - i dont have modules.pp file. But as i said in my previous email, i > have customised servername.pp siles > * > 3. The file:* /etc/puppet/modules/jb_test/manifests/jb_config.pp > - i created this file > * > 4. The file:* /etc/puppet/modules/jb_test/manifests/init_config.pp > - i created this file > * > 5. The file:* /etc/puppet/modules/jb_test/files/group_test > - i have this file* > 6. and finally, in the */etc/puppet/manifests/nodes.pp > - I dont have this file in my configuration* > > > On Mon, Apr 16, 2012 at 7:38 AM, Sans <r.santanu.das@gmail.com> wrote: > >> humm...... not sure but looks like couple of steps from my previous post >> are missing. >> Can you pls confirm that you have all of these: >> >> >> 1. The line: *import ''modules''* in */etc/puppet/manifests/site.pp* >> 2. The line: *import ''jb_test''* in* /etc/puppet/manifests/modules.pp* >> 3. The file:* /etc/puppet/modules/jb_test/manifests/jb_config.pp* >> 4. The file:* /etc/puppet/modules/jb_test/manifests/init_config.pp* >> 5. The file:* /etc/puppet/modules/jb_test/files/group_test* >> 6. and finally, in the */etc/puppet/manifests/nodes.pp* >> >> node ''vm-jeeva2'' { >>> include cp_jboss_conf >>> } >> >> >> (don''t add inherits jeeva_base for the time being) >> >> Cheers!! >> >> >> >> >> On Monday, April 16, 2012 1:06:59 PM UTC+1, Jeeva wrote: >>> >>> Hi Sans, >>> >>> I followed your steps, but i am getting the same error again >>> >>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >>> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/ >>> **vm-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >>> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/ >>> **vm-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>> (//vm-jeeva2.aircell.prod/**Puppet) Could not retrieve catalog from >>> remote server: Error 400 on SERVER: Could not find class cp_jboss_conf for >>> vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/**vm-jeeva2.aircell.prod.pp:2 >>> on node vm-jeeva2.aircell.prod >>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>> (//vm-jeeva2.aircell.prod/**Puppet) Using cached catalog >>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>> (//vm-jeeva2.aircell.prod/**Puppet) Could not retrieve catalog; >>> skipping run >>> >>> @All, Just not to confuse anyone, currently my puppet server is working >>> as expected. i have lot of modules created and it works. This is how my >>> configuration is >>> >>> 1 ) my site.pp file is under /etc/puppet/manifest/site.pp and below is >>> my content >>> import ''nodes/*'' >>> $puppetserver = ''puppet-server.domain.com'' >>> >>> 2) All my modules is under below path >>> >>> /etc/puppet/modules/ >>> >>> 3) under below path i have all my .pp files . eg >>> >>> /etc/puppet/manifests/nodes/**server1.pp >>> /etc/puppet/manifests/nodes/**server2.pp >>> /etc/puppet/manifests/nodes/**server3.pp >>> /etc/puppet/manifests/nodes/**server4.pp >>> >>> addition to this i have a jeeva_base.pp file where i include all my >>> modules. below is the portion of its content >>> ------------------------------**----- >>> node jeeva_base { >>> include all_scripts >>> include dev_jboss_jeeva >>> } >>> ------------------------------**--------- >>> below is the content of my server1.pp file . i have created individual >>> .pp file for each server which inherits jeeva_base node. >>> ------------------------------**------------ >>> node server1 inherits jeeva_base { >>> } >>> ------------------------------**------------- >>> >>> As i said above, this is my requirement. >>> >>> we have 3 version of jboss running in our environment in different >>> servers. eg. jboss4 in server1, jboss5 in server2 , jboss6 in server3 , and >>> no jboss in server 4 , etc >>> >>> on each server, jboss config file sits under different path. >>> eg: in server 1 it sits under /opt/jboss4/ >>> in server 2 it sits under /opt/jboss5/ >>> in server 3 it sits under /opt/jboss6/ >>> in server 4 no jboss is running >>> >>> now i have 3 different configuration file for each version of jboss >>> which i need to replace. eg. >>> file1, i need to replace it to jboss4 >>> file2 , i need to replace it to jboss5 >>> file3 , i need to replace it to jboss6 >>> also we need to keep in mind that it should not create a files/folder on >>> server4 which doesnt have jboss. >>> >>> Now i need a module which checks the jboss path on each server and >>> should replace the sepcific file if it finds the specific path. eg >>> >>> if it finds /opt/jboss4, then it should replace file1, if it finds >>> /opt/jboss5, then replace file2 and so on. But if no jboss path is found >>> then dont perform any thing on that server. >>> >>> As suggested by Gary ( initial conversation) , gary helped me to create >>> the custom facts. but it didnt work. Not sure what went wrong. >>> in general, my requirement is very simple. just do a check on each >>> server for specific path. if found, then copy/replace respective file , if >>> not found then dont perform any action on that server. >>> I hope i didnt confuse anyone. >>> >>> Thanks, >>> Jeeva >>> >>> >>> >>> On Mon, Apr 16, 2012 at 5:54 AM, Munna S <19.munna@gmail.com> wrote: >>> >>>> Hi Sans >>>> i am trying it now. will let you know the output soon. Also in my >>>> site.pp i have the below content >>>> >>>> import ''nodes/*'' >>>> $puppetserver = ''puppet-server.domain.com'' >>>> >>>> >>>> >>>> I do have many modules , which works as expected. >>>> >>>> Thanks, >>>> Jeeva >>>> >>>> cat /etc/puppet/manifests/site.pp >>>> On Mon, Apr 16, 2012 at 5:36 AM, Sans <r.santanu.das@gmail.com> wrote: >>>> >>>>> It''s definitely a class loading problem and I don''t think Jeeva is >>>>> using "modules" at all. >>>>> >>>>> Jeeva: >>>>> Could you pls try the things I said in my previous post and see if >>>>> that works? Cheers!! >>>>> >>>>> >>>>> >>>>> On Monday, April 16, 2012 1:34:31 AM UTC+1, Wil Cooley wrote: >>>>>> >>>>>> On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote: >>>>>> > I followed your steps. now i am getting below error >>>>>> > >>>>>> > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find >>>>>> class >>>>>> > dev_jboss_jeeva for vm-jeeva2.aircell.prod at >>>>>> >>>>>> ... >>>>>> >>>>>> > i have jeeva_base.pp file under /etc/puppet/manifests/nodes and >>>>>> below is >>>>>> > its content >>>>>> > ------------------------------****-- >>>>>> > node jeeva_base { >>>>>> > include dev_jboss_jeeva} >>>>>> > >>>>>> > ------------------------------****-------- >>>>>> > >>>>>> > also i have a another .pp file by name vm-jeeva2 under >>>>>> > /etc/puppet/manifests/nodes and below is its content. we have >>>>>> seperate .pp >>>>>> > file for each server name. one server is vm-jeeva2. >>>>>> > ------------------ >>>>>> > node vm-jeeva2 inherits jeeva_base {} >>>>>> > >>>>>> > -------------------- >>>>>> > >>>>>> > what could be the problem ? >>>>>> >>>>>> Where is the class dev_jboss_jeeva defined? You mentioned above an >>>>>> ''init.pp'', which would be usual if you were using modules, but it >>>>>> does >>>>>> not seem like you are using modules. >>>>>> >>>>>> It sounds like the problem you are having is wholly outside of the >>>>>> complicated machinations of what you''re trying to do. It looks more >>>>>> like you have a much simpler class-loading problem. >>>>>> >>>>>> Here are a few things to try: >>>>>> * Comment out all of the stuff from dev_jboss_jeeva and replace it >>>>>> with a "warning" function call, to log that everything is working >>>>>> right: >>>>>> class dev_jboss_jeeva { >>>>>> warning("dev_jboss_jeeva has successfully loaded") >>>>>> } >>>>>> * Copy your class dev_jboss_jeeva { ... } right before the "node >>>>>> jeeva_base" and see if you see your warning message (I suggest >>>>>> warning >>>>>> instead of info because info sometimes requires using --verbose on >>>>>> the >>>>>> command line; warning will always show): >>>>>> class dev_jboss_jeeva { >>>>>> warning("dev_jboss_jeeva was here") >>>>>> } >>>>>> node jeeva_base { >>>>>> include dev_jboss_jeeva >>>>>> } >>>>>> >>>>>> If you see the message with the class defined right before the node, >>>>>> but not wherever else you have it, then you know the problem is that >>>>>> it is unable to actually find the class and you should give specifics >>>>>> about that instead. >>>>>> >>>>>> Wil >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "Puppet Users" group. >>>>> To view this discussion on the web visit https://groups.google.com/d/* >>>>> *msg/puppet-users/-/_**Puid9FxhfAJ<https://groups.google.com/d/msg/puppet-users/-/_Puid9FxhfAJ> >>>>> . >>>>> >>>>> To post to this group, send email to puppet-users@googlegroups.com. >>>>> To unsubscribe from this group, send email to >>>>> puppet-users+unsubscribe@**googlegroups.com<puppet-users%2Bunsubscribe@googlegroups.com> >>>>> . >>>>> For more options, visit this group at http://groups.google.com/** >>>>> group/puppet-users?hl=en<http://groups.google.com/group/puppet-users?hl=en> >>>>> . >>>>> >>>> >>>> >>> >> On Monday, April 16, 2012 1:06:59 PM UTC+1, Jeeva wrote: >>> >>> Hi Sans, >>> >>> I followed your steps, but i am getting the same error again >>> >>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >>> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/ >>> **vm-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >>> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/ >>> **vm-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>> (//vm-jeeva2.aircell.prod/**Puppet) Could not retrieve catalog from >>> remote server: Error 400 on SERVER: Could not find class cp_jboss_conf for >>> vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/**vm-jeeva2.aircell.prod.pp:2 >>> on node vm-jeeva2.aircell.prod >>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>> (//vm-jeeva2.aircell.prod/**Puppet) Using cached catalog >>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>> (//vm-jeeva2.aircell.prod/**Puppet) Could not retrieve catalog; >>> skipping run >>> >>> @All, Just not to confuse anyone, currently my puppet server is working >>> as expected. i have lot of modules created and it works. This is how my >>> configuration is >>> >>> 1 ) my site.pp file is under /etc/puppet/manifest/site.pp and below is >>> my content >>> import ''nodes/*'' >>> $puppetserver = ''puppet-server.domain.com'' >>> >>> 2) All my modules is under below path >>> >>> /etc/puppet/modules/ >>> >>> 3) under below path i have all my .pp files . eg >>> >>> /etc/puppet/manifests/nodes/**server1.pp >>> /etc/puppet/manifests/nodes/**server2.pp >>> /etc/puppet/manifests/nodes/**server3.pp >>> /etc/puppet/manifests/nodes/**server4.pp >>> >>> addition to this i have a jeeva_base.pp file where i include all my >>> modules. below is the portion of its content >>> ------------------------------**----- >>> node jeeva_base { >>> include all_scripts >>> include dev_jboss_jeeva >>> } >>> ------------------------------**--------- >>> below is the content of my server1.pp file . i have created individual >>> .pp file for each server which inherits jeeva_base node. >>> ------------------------------**------------ >>> node server1 inherits jeeva_base { >>> } >>> ------------------------------**------------- >>> >>> As i said above, this is my requirement. >>> >>> we have 3 version of jboss running in our environment in different >>> servers. eg. jboss4 in server1, jboss5 in server2 , jboss6 in server3 , and >>> no jboss in server 4 , etc >>> >>> on each server, jboss config file sits under different path. >>> eg: in server 1 it sits under /opt/jboss4/ >>> in server 2 it sits under /opt/jboss5/ >>> in server 3 it sits under /opt/jboss6/ >>> in server 4 no jboss is running >>> >>> now i have 3 different configuration file for each version of jboss >>> which i need to replace. eg. >>> file1, i need to replace it to jboss4 >>> file2 , i need to replace it to jboss5 >>> file3 , i need to replace it to jboss6 >>> also we need to keep in mind that it should not create a files/folder on >>> server4 which doesnt have jboss. >>> >>> Now i need a module which checks the jboss path on each server and >>> should replace the sepcific file if it finds the specific path. eg >>> >>> if it finds /opt/jboss4, then it should replace file1, if it finds >>> /opt/jboss5, then replace file2 and so on. But if no jboss path is found >>> then dont perform any thing on that server. >>> >>> As suggested by Gary ( initial conversation) , gary helped me to create >>> the custom facts. but it didnt work. Not sure what went wrong. >>> in general, my requirement is very simple. just do a check on each >>> server for specific path. if found, then copy/replace respective file , if >>> not found then dont perform any action on that server. >>> I hope i didnt confuse anyone. >>> >>> Thanks, >>> Jeeva >>> >>> >>> >>> On Mon, Apr 16, 2012 at 5:54 AM, Munna S <19.munna@gmail.com> wrote: >>> >>>> Hi Sans >>>> i am trying it now. will let you know the output soon. Also in my >>>> site.pp i have the below content >>>> >>>> import ''nodes/*'' >>>> $puppetserver = ''puppet-server.domain.com'' >>>> >>>> >>>> >>>> I do have many modules , which works as expected. >>>> >>>> Thanks, >>>> Jeeva >>>> >>>> cat /etc/puppet/manifests/site.pp >>>> On Mon, Apr 16, 2012 at 5:36 AM, Sans <r.santanu.das@gmail.com> wrote: >>>> >>>>> It''s definitely a class loading problem and I don''t think Jeeva is >>>>> using "modules" at all. >>>>> >>>>> Jeeva: >>>>> Could you pls try the things I said in my previous post and see if >>>>> that works? Cheers!! >>>>> >>>>> >>>>> >>>>> On Monday, April 16, 2012 1:34:31 AM UTC+1, Wil Cooley wrote: >>>>>> >>>>>> On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote: >>>>>> > I followed your steps. now i am getting below error >>>>>> > >>>>>> > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find >>>>>> class >>>>>> > dev_jboss_jeeva for vm-jeeva2.aircell.prod at >>>>>> >>>>>> ... >>>>>> >>>>>> > i have jeeva_base.pp file under /etc/puppet/manifests/nodes and >>>>>> below is >>>>>> > its content >>>>>> > ------------------------------****-- >>>>>> > node jeeva_base { >>>>>> > include dev_jboss_jeeva} >>>>>> > >>>>>> > ------------------------------****-------- >>>>>> > >>>>>> > also i have a another .pp file by name vm-jeeva2 under >>>>>> > /etc/puppet/manifests/nodes and below is its content. we have >>>>>> seperate .pp >>>>>> > file for each server name. one server is vm-jeeva2. >>>>>> > ------------------ >>>>>> > node vm-jeeva2 inherits jeeva_base {} >>>>>> > >>>>>> > -------------------- >>>>>> > >>>>>> > what could be the problem ? >>>>>> >>>>>> Where is the class dev_jboss_jeeva defined? You mentioned above an >>>>>> ''init.pp'', which would be usual if you were using modules, but it >>>>>> does >>>>>> not seem like you are using modules. >>>>>> >>>>>> It sounds like the problem you are having is wholly outside of the >>>>>> complicated machinations of what you''re trying to do. It looks more >>>>>> like you have a much simpler class-loading problem. >>>>>> >>>>>> Here are a few things to try: >>>>>> * Comment out all of the stuff from dev_jboss_jeeva and replace it >>>>>> with a "warning" function call, to log that everything is working >>>>>> right: >>>>>> class dev_jboss_jeeva { >>>>>> warning("dev_jboss_jeeva has successfully loaded") >>>>>> } >>>>>> * Copy your class dev_jboss_jeeva { ... } right before the "node >>>>>> jeeva_base" and see if you see your warning message (I suggest >>>>>> warning >>>>>> instead of info because info sometimes requires using --verbose on >>>>>> the >>>>>> command line; warning will always show): >>>>>> class dev_jboss_jeeva { >>>>>> warning("dev_jboss_jeeva was here") >>>>>> } >>>>>> node jeeva_base { >>>>>> include dev_jboss_jeeva >>>>>> } >>>>>> >>>>>> If you see the message with the class defined right before the node, >>>>>> but not wherever else you have it, then you know the problem is that >>>>>> it is unable to actually find the class and you should give specifics >>>>>> about that instead. >>>>>> >>>>>> Wil >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "Puppet Users" group. >>>>> To view this discussion on the web visit https://groups.google.com/d/* >>>>> *msg/puppet-users/-/_**Puid9FxhfAJ<https://groups.google.com/d/msg/puppet-users/-/_Puid9FxhfAJ> >>>>> . >>>>> >>>>> To post to this group, send email to puppet-users@googlegroups.com. >>>>> To unsubscribe from this group, send email to >>>>> puppet-users+unsubscribe@**googlegroups.com<puppet-users%2Bunsubscribe@googlegroups.com> >>>>> . >>>>> For more options, visit this group at http://groups.google.com/** >>>>> group/puppet-users?hl=en<http://groups.google.com/group/puppet-users?hl=en> >>>>> . >>>>> >>>> >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "Puppet Users" group. >> To view this discussion on the web visit >> https://groups.google.com/d/msg/puppet-users/-/n1-iTusITgQJ. >> >> To post to this group, send email to puppet-users@googlegroups.com. >> To unsubscribe from this group, send email to >> puppet-users+unsubscribe@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/puppet-users?hl=en. >> > >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To view this discussion on the web visit https://groups.google.com/d/msg/puppet-users/-/EnPLOpwOS78J. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.
Munna S
2012-Apr-16 15:22 UTC
Re: [Puppet Users] Re: Need puppet module for condition copy
Thank you so much San for your time and help. Can anyone help me with this -Jeeva On Mon, Apr 16, 2012 at 9:54 AM, Sans <r.santanu.das@gmail.com> wrote:> According to your configuration, I don''t think my code will work at all. > Your setup is quite different then mine and I''ve no other suggestions for > you at the moment. Hopefully, someone else will pick it up from here. > Cheers!! > > > > > On Monday, April 16, 2012 1:59:25 PM UTC+1, Jeeva wrote: >> >> >> 1. The line: *import ''modules''* in */etc/puppet/manifests/site.pp >> - i do have site.pp file but dont have the entry for modules. i added >> the entry but later i saw lot of errors related to modules in log >> * >> 2. The line: *import ''jb_test''* in* /etc/puppet/manifests/modules.pp >> - i dont have modules.pp file. But as i said in my previous email, i >> have customised servername.pp siles >> * >> 3. The file:* /etc/puppet/modules/jb_test/manifests/jb_config.pp >> - i created this file >> * >> 4. The file:* /etc/puppet/modules/jb_test/manifests/init_config.pp >> - i created this file >> * >> 5. The file:* /etc/puppet/modules/jb_test/files/group_test >> - i have this file* >> 6. and finally, in the */etc/puppet/manifests/nodes.pp >> - I dont have this file in my configuration* >> >> >> On Mon, Apr 16, 2012 at 7:38 AM, Sans <r.santanu.das@gmail.com> wrote: >> >>> humm...... not sure but looks like couple of steps from my previous post >>> are missing. >>> Can you pls confirm that you have all of these: >>> >>> >>> 1. The line: *import ''modules''* in */etc/puppet/manifests/site.pp* >>> 2. The line: *import ''jb_test''* in* /etc/puppet/manifests/modules.pp* >>> 3. The file:* /etc/puppet/modules/jb_test/manifests/jb_config.pp* >>> 4. The file:* /etc/puppet/modules/jb_test/manifests/init_config.pp* >>> 5. The file:* /etc/puppet/modules/jb_test/files/group_test* >>> 6. and finally, in the */etc/puppet/manifests/nodes.pp* >>> >>> node ''vm-jeeva2'' { >>>> include cp_jboss_conf >>>> } >>> >>> >>> (don''t add inherits jeeva_base for the time being) >>> >>> Cheers!! >>> >>> >>> >>> >>> On Monday, April 16, 2012 1:06:59 PM UTC+1, Jeeva wrote: >>>> >>>> Hi Sans, >>>> >>>> I followed your steps, but i am getting the same error again >>>> >>>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >>>> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/ >>>> **vm**-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >>>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >>>> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/ >>>> **vm**-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >>>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>>> (//vm-jeeva2.aircell.prod/**Pupp**et) Could not retrieve catalog from >>>> remote server: Error 400 on SERVER: Could not find class cp_jboss_conf for >>>> vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/**vm**-jeeva2.aircell.prod.pp:2 >>>> on node vm-jeeva2.aircell.prod >>>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>>> (//vm-jeeva2.aircell.prod/**Pupp**et) Using cached catalog >>>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>>> (//vm-jeeva2.aircell.prod/**Pupp**et) Could not retrieve catalog; >>>> skipping run >>>> >>>> @All, Just not to confuse anyone, currently my puppet server is working >>>> as expected. i have lot of modules created and it works. This is how my >>>> configuration is >>>> >>>> 1 ) my site.pp file is under /etc/puppet/manifest/site.pp and below is >>>> my content >>>> import ''nodes/*'' >>>> $puppetserver = ''puppet-server.domain.com'' >>>> >>>> 2) All my modules is under below path >>>> >>>> /etc/puppet/modules/ >>>> >>>> 3) under below path i have all my .pp files . eg >>>> >>>> /etc/puppet/manifests/nodes/**se**rver1.pp >>>> /etc/puppet/manifests/nodes/**se**rver2.pp >>>> /etc/puppet/manifests/nodes/**se**rver3.pp >>>> /etc/puppet/manifests/nodes/**se**rver4.pp >>>> >>>> addition to this i have a jeeva_base.pp file where i include all my >>>> modules. below is the portion of its content >>>> ------------------------------****----- >>>> node jeeva_base { >>>> include all_scripts >>>> include dev_jboss_jeeva >>>> } >>>> ------------------------------****--------- >>>> below is the content of my server1.pp file . i have created individual >>>> .pp file for each server which inherits jeeva_base node. >>>> ------------------------------****------------ >>>> node server1 inherits jeeva_base { >>>> } >>>> ------------------------------****------------- >>>> >>>> As i said above, this is my requirement. >>>> >>>> we have 3 version of jboss running in our environment in different >>>> servers. eg. jboss4 in server1, jboss5 in server2 , jboss6 in server3 , and >>>> no jboss in server 4 , etc >>>> >>>> on each server, jboss config file sits under different path. >>>> eg: in server 1 it sits under /opt/jboss4/ >>>> in server 2 it sits under /opt/jboss5/ >>>> in server 3 it sits under /opt/jboss6/ >>>> in server 4 no jboss is running >>>> >>>> now i have 3 different configuration file for each version of jboss >>>> which i need to replace. eg. >>>> file1, i need to replace it to jboss4 >>>> file2 , i need to replace it to jboss5 >>>> file3 , i need to replace it to jboss6 >>>> also we need to keep in mind that it should not create a files/folder >>>> on server4 which doesnt have jboss. >>>> >>>> Now i need a module which checks the jboss path on each server and >>>> should replace the sepcific file if it finds the specific path. eg >>>> >>>> if it finds /opt/jboss4, then it should replace file1, if it finds >>>> /opt/jboss5, then replace file2 and so on. But if no jboss path is found >>>> then dont perform any thing on that server. >>>> >>>> As suggested by Gary ( initial conversation) , gary helped me to create >>>> the custom facts. but it didnt work. Not sure what went wrong. >>>> in general, my requirement is very simple. just do a check on each >>>> server for specific path. if found, then copy/replace respective file , if >>>> not found then dont perform any action on that server. >>>> I hope i didnt confuse anyone. >>>> >>>> Thanks, >>>> Jeeva >>>> >>>> >>>> >>>> On Mon, Apr 16, 2012 at 5:54 AM, Munna S <19.munna@gmail.com> wrote: >>>> >>>>> Hi Sans >>>>> i am trying it now. will let you know the output soon. Also in my >>>>> site.pp i have the below content >>>>> >>>>> import ''nodes/*'' >>>>> $puppetserver = ''puppet-server.domain.com'' >>>>> >>>>> >>>>> >>>>> I do have many modules , which works as expected. >>>>> >>>>> Thanks, >>>>> Jeeva >>>>> >>>>> cat /etc/puppet/manifests/site.pp >>>>> On Mon, Apr 16, 2012 at 5:36 AM, Sans <r.santanu.das@gmail.com>wrote: >>>>> >>>>>> It''s definitely a class loading problem and I don''t think Jeeva is >>>>>> using "modules" at all. >>>>>> >>>>>> Jeeva: >>>>>> Could you pls try the things I said in my previous post and see if >>>>>> that works? Cheers!! >>>>>> >>>>>> >>>>>> >>>>>> On Monday, April 16, 2012 1:34:31 AM UTC+1, Wil Cooley wrote: >>>>>>> >>>>>>> On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote: >>>>>>> > I followed your steps. now i am getting below error >>>>>>> > >>>>>>> > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find >>>>>>> class >>>>>>> > dev_jboss_jeeva for vm-jeeva2.aircell.prod at >>>>>>> >>>>>>> ... >>>>>>> >>>>>>> > i have jeeva_base.pp file under /etc/puppet/manifests/nodes and >>>>>>> below is >>>>>>> > its content >>>>>>> > ------------------------------******-- >>>>>>> > node jeeva_base { >>>>>>> > include dev_jboss_jeeva} >>>>>>> > >>>>>>> > ------------------------------******-------- >>>>>>> > >>>>>>> > also i have a another .pp file by name vm-jeeva2 under >>>>>>> > /etc/puppet/manifests/nodes and below is its content. we have >>>>>>> seperate .pp >>>>>>> > file for each server name. one server is vm-jeeva2. >>>>>>> > ------------------ >>>>>>> > node vm-jeeva2 inherits jeeva_base {} >>>>>>> > >>>>>>> > -------------------- >>>>>>> > >>>>>>> > what could be the problem ? >>>>>>> >>>>>>> Where is the class dev_jboss_jeeva defined? You mentioned above an >>>>>>> ''init.pp'', which would be usual if you were using modules, but it >>>>>>> does >>>>>>> not seem like you are using modules. >>>>>>> >>>>>>> It sounds like the problem you are having is wholly outside of the >>>>>>> complicated machinations of what you''re trying to do. It looks more >>>>>>> like you have a much simpler class-loading problem. >>>>>>> >>>>>>> Here are a few things to try: >>>>>>> * Comment out all of the stuff from dev_jboss_jeeva and replace it >>>>>>> with a "warning" function call, to log that everything is working >>>>>>> right: >>>>>>> class dev_jboss_jeeva { >>>>>>> warning("dev_jboss_jeeva has successfully loaded") >>>>>>> } >>>>>>> * Copy your class dev_jboss_jeeva { ... } right before the "node >>>>>>> jeeva_base" and see if you see your warning message (I suggest >>>>>>> warning >>>>>>> instead of info because info sometimes requires using --verbose on >>>>>>> the >>>>>>> command line; warning will always show): >>>>>>> class dev_jboss_jeeva { >>>>>>> warning("dev_jboss_jeeva was here") >>>>>>> } >>>>>>> node jeeva_base { >>>>>>> include dev_jboss_jeeva >>>>>>> } >>>>>>> >>>>>>> If you see the message with the class defined right before the node, >>>>>>> but not wherever else you have it, then you know the problem is that >>>>>>> it is unable to actually find the class and you should give >>>>>>> specifics >>>>>>> about that instead. >>>>>>> >>>>>>> Wil >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Puppet Users" group. >>>>>> To view this discussion on the web visit https://groups.google.com/d/ >>>>>> **ms**g/puppet-users/-/_**Puid9FxhfAJ<https://groups.google.com/d/msg/puppet-users/-/_Puid9FxhfAJ> >>>>>> . >>>>>> >>>>>> To post to this group, send email to puppet-users@googlegroups.com. >>>>>> To unsubscribe from this group, send email to >>>>>> puppet-users+unsubscribe@**googl**egroups.com<puppet-users%2Bunsubscribe@googlegroups.com> >>>>>> . >>>>>> For more options, visit this group at http://groups.google.com/** >>>>>> group**/puppet-users?hl=en<http://groups.google.com/group/puppet-users?hl=en> >>>>>> . >>>>>> >>>>> >>>>> >>>> >>> On Monday, April 16, 2012 1:06:59 PM UTC+1, Jeeva wrote: >>>> >>>> Hi Sans, >>>> >>>> I followed your steps, but i am getting the same error again >>>> >>>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >>>> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/ >>>> **vm**-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >>>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: Could not find class >>>> cp_jboss_conf for vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/ >>>> **vm**-jeeva2.aircell.prod.pp:2 on node vm-jeeva2.aircell.prod >>>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>>> (//vm-jeeva2.aircell.prod/**Pupp**et) Could not retrieve catalog from >>>> remote server: Error 400 on SERVER: Could not find class cp_jboss_conf for >>>> vm-jeeva2.aircell.prod at /etc/puppet/manifests/nodes/**vm**-jeeva2.aircell.prod.pp:2 >>>> on node vm-jeeva2.aircell.prod >>>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>>> (//vm-jeeva2.aircell.prod/**Pupp**et) Using cached catalog >>>> Apr 16 11:29:39 pil-vm-pup-01 puppet-master[8092]: >>>> (//vm-jeeva2.aircell.prod/**Pupp**et) Could not retrieve catalog; >>>> skipping run >>>> >>>> @All, Just not to confuse anyone, currently my puppet server is working >>>> as expected. i have lot of modules created and it works. This is how my >>>> configuration is >>>> >>>> 1 ) my site.pp file is under /etc/puppet/manifest/site.pp and below is >>>> my content >>>> import ''nodes/*'' >>>> $puppetserver = ''puppet-server.domain.com'' >>>> >>>> 2) All my modules is under below path >>>> >>>> /etc/puppet/modules/ >>>> >>>> 3) under below path i have all my .pp files . eg >>>> >>>> /etc/puppet/manifests/nodes/**se**rver1.pp >>>> /etc/puppet/manifests/nodes/**se**rver2.pp >>>> /etc/puppet/manifests/nodes/**se**rver3.pp >>>> /etc/puppet/manifests/nodes/**se**rver4.pp >>>> >>>> addition to this i have a jeeva_base.pp file where i include all my >>>> modules. below is the portion of its content >>>> ------------------------------****----- >>>> node jeeva_base { >>>> include all_scripts >>>> include dev_jboss_jeeva >>>> } >>>> ------------------------------****--------- >>>> below is the content of my server1.pp file . i have created individual >>>> .pp file for each server which inherits jeeva_base node. >>>> ------------------------------****------------ >>>> node server1 inherits jeeva_base { >>>> } >>>> ------------------------------****------------- >>>> >>>> As i said above, this is my requirement. >>>> >>>> we have 3 version of jboss running in our environment in different >>>> servers. eg. jboss4 in server1, jboss5 in server2 , jboss6 in server3 , and >>>> no jboss in server 4 , etc >>>> >>>> on each server, jboss config file sits under different path. >>>> eg: in server 1 it sits under /opt/jboss4/ >>>> in server 2 it sits under /opt/jboss5/ >>>> in server 3 it sits under /opt/jboss6/ >>>> in server 4 no jboss is running >>>> >>>> now i have 3 different configuration file for each version of jboss >>>> which i need to replace. eg. >>>> file1, i need to replace it to jboss4 >>>> file2 , i need to replace it to jboss5 >>>> file3 , i need to replace it to jboss6 >>>> also we need to keep in mind that it should not create a files/folder >>>> on server4 which doesnt have jboss. >>>> >>>> Now i need a module which checks the jboss path on each server and >>>> should replace the sepcific file if it finds the specific path. eg >>>> >>>> if it finds /opt/jboss4, then it should replace file1, if it finds >>>> /opt/jboss5, then replace file2 and so on. But if no jboss path is found >>>> then dont perform any thing on that server. >>>> >>>> As suggested by Gary ( initial conversation) , gary helped me to create >>>> the custom facts. but it didnt work. Not sure what went wrong. >>>> in general, my requirement is very simple. just do a check on each >>>> server for specific path. if found, then copy/replace respective file , if >>>> not found then dont perform any action on that server. >>>> I hope i didnt confuse anyone. >>>> >>>> Thanks, >>>> Jeeva >>>> >>>> >>>> >>>> On Mon, Apr 16, 2012 at 5:54 AM, Munna S <19.munna@gmail.com> wrote: >>>> >>>>> Hi Sans >>>>> i am trying it now. will let you know the output soon. Also in my >>>>> site.pp i have the below content >>>>> >>>>> import ''nodes/*'' >>>>> $puppetserver = ''puppet-server.domain.com'' >>>>> >>>>> >>>>> >>>>> I do have many modules , which works as expected. >>>>> >>>>> Thanks, >>>>> Jeeva >>>>> >>>>> cat /etc/puppet/manifests/site.pp >>>>> On Mon, Apr 16, 2012 at 5:36 AM, Sans <r.santanu.das@gmail.com>wrote: >>>>> >>>>>> It''s definitely a class loading problem and I don''t think Jeeva is >>>>>> using "modules" at all. >>>>>> >>>>>> Jeeva: >>>>>> Could you pls try the things I said in my previous post and see if >>>>>> that works? Cheers!! >>>>>> >>>>>> >>>>>> >>>>>> On Monday, April 16, 2012 1:34:31 AM UTC+1, Wil Cooley wrote: >>>>>>> >>>>>>> On Apr 13, 10:49 am, Munna S <19.mu...@gmail.com> wrote: >>>>>>> > I followed your steps. now i am getting below error >>>>>>> > >>>>>>> > Apr 13 17:42:44 pil-vm-pup-01 puppet-master[7899]: Could not find >>>>>>> class >>>>>>> > dev_jboss_jeeva for vm-jeeva2.aircell.prod at >>>>>>> >>>>>>> ... >>>>>>> >>>>>>> > i have jeeva_base.pp file under /etc/puppet/manifests/nodes and >>>>>>> below is >>>>>>> > its content >>>>>>> > ------------------------------******-- >>>>>>> > node jeeva_base { >>>>>>> > include dev_jboss_jeeva} >>>>>>> > >>>>>>> > ------------------------------******-------- >>>>>>> > >>>>>>> > also i have a another .pp file by name vm-jeeva2 under >>>>>>> > /etc/puppet/manifests/nodes and below is its content. we have >>>>>>> seperate .pp >>>>>>> > file for each server name. one server is vm-jeeva2. >>>>>>> > ------------------ >>>>>>> > node vm-jeeva2 inherits jeeva_base {} >>>>>>> > >>>>>>> > -------------------- >>>>>>> > >>>>>>> > what could be the problem ? >>>>>>> >>>>>>> Where is the class dev_jboss_jeeva defined? You mentioned above an >>>>>>> ''init.pp'', which would be usual if you were using modules, but it >>>>>>> does >>>>>>> not seem like you are using modules. >>>>>>> >>>>>>> It sounds like the problem you are having is wholly outside of the >>>>>>> complicated machinations of what you''re trying to do. It looks more >>>>>>> like you have a much simpler class-loading problem. >>>>>>> >>>>>>> Here are a few things to try: >>>>>>> * Comment out all of the stuff from dev_jboss_jeeva and replace it >>>>>>> with a "warning" function call, to log that everything is working >>>>>>> right: >>>>>>> class dev_jboss_jeeva { >>>>>>> warning("dev_jboss_jeeva has successfully loaded") >>>>>>> } >>>>>>> * Copy your class dev_jboss_jeeva { ... } right before the "node >>>>>>> jeeva_base" and see if you see your warning message (I suggest >>>>>>> warning >>>>>>> instead of info because info sometimes requires using --verbose on >>>>>>> the >>>>>>> command line; warning will always show): >>>>>>> class dev_jboss_jeeva { >>>>>>> warning("dev_jboss_jeeva was here") >>>>>>> } >>>>>>> node jeeva_base { >>>>>>> include dev_jboss_jeeva >>>>>>> } >>>>>>> >>>>>>> If you see the message with the class defined right before the node, >>>>>>> but not wherever else you have it, then you know the problem is that >>>>>>> it is unable to actually find the class and you should give >>>>>>> specifics >>>>>>> about that instead. >>>>>>> >>>>>>> Wil >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Puppet Users" group. >>>>>> To view this discussion on the web visit https://groups.google.com/d/ >>>>>> **ms**g/puppet-users/-/_**Puid9FxhfAJ<https://groups.google.com/d/msg/puppet-users/-/_Puid9FxhfAJ> >>>>>> . >>>>>> >>>>>> To post to this group, send email to puppet-users@googlegroups.com. >>>>>> To unsubscribe from this group, send email to >>>>>> puppet-users+unsubscribe@**googl**egroups.com<puppet-users%2Bunsubscribe@googlegroups.com> >>>>>> . >>>>>> For more options, visit this group at http://groups.google.com/** >>>>>> group**/puppet-users?hl=en<http://groups.google.com/group/puppet-users?hl=en> >>>>>> . >>>>>> >>>>> >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Puppet Users" group. >>> To view this discussion on the web visit https://groups.google.com/d/** >>> msg/puppet-users/-/n1-**iTusITgQJ<https://groups.google.com/d/msg/puppet-users/-/n1-iTusITgQJ> >>> . >>> >>> To post to this group, send email to puppet-users@googlegroups.com. >>> To unsubscribe from this group, send email to puppet-users+unsubscribe@* >>> *googlegroups.com <puppet-users%2Bunsubscribe@googlegroups.com>. >>> For more options, visit this group at http://groups.google.com/** >>> group/puppet-users?hl=en<http://groups.google.com/group/puppet-users?hl=en> >>> . >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "Puppet Users" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/puppet-users/-/EnPLOpwOS78J. > > To post to this group, send email to puppet-users@googlegroups.com. > To unsubscribe from this group, send email to > puppet-users+unsubscribe@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/puppet-users?hl=en. >-- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To unsubscribe from this group, send email to puppet-users+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/puppet-users?hl=en.