Puppet users - Apr 2008 - Getting another MySQL error, this time with puppetshow...

Not sure if this is the right place for puppetshow questions, but here
goes...

It''s time for me to move away from my home grown ruby on rails puppet
front and start using puppetshow so I can focus my development work on
the data instead of the view. Unfortunately, I am getting the
following error when running a rake db:migrate in the puppet show
directory:

rake db:migrate
(in /var/www/rails/puppetshow)
rake aborted!
Mysql::Error: No database selected: SHOW FIELDS FROM `resource_tags`

I followed the instructions at
http://reductivelabs.com/trac/puppet/wiki/PuppetShow
and used git clone to pull down the latest.

There has been a little bit of discussion on the web about this issue,
but most of it seems pretty dated and none of the solution seem to
work or didn''t apply: commenting things out in the mysql_adapter, gem
install mysql, etc.

Has anybody else run into this issue and if so, how were you able to
work around it? I also read that there were some issues with the
0.23.x releases on debian and I was using that version on ubuntu. I
have long since upgraded but perhaps this could be a lingering issue?
(grasping at straws :)

 - Thanks again

btw, here''s some version info:
$ puppetmasterd --version
0.24.4
$ puppetd --version
0.24.4
$ mysqld --version
mysqld  Ver 5.0.45-Debian_1ubuntu3.1-log for pc-linux-gnu on i486
(Debian etch distribution)
$ rails --version
Rails 2.0.2
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com
To unsubscribe from this group, send email to
puppet-users-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en
-~----------~----~----~----~------~----~------~--~---

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

jpruitt@juniper.net wrote:
|
| rake db:migrate
| (in /var/www/rails/puppetshow)
| rake aborted!
| Mysql::Error: No database selected: SHOW FIELDS FROM `resource_tags`

What user are you running the command as?  I found I needed root privs
to run this on my hosts.

Regards

James Turnbull

- --
James Turnbull (james@lovedthanlost.net)
- --
Author of:
- - Pulling Strings with Puppet
(http://www.amazon.com/gp/product/1590599780/)
- - Pro Nagios 2.0
(http://www.amazon.com/gp/product/1590596099/)
- - Hardening Linux
(http://www.amazon.com/gp/product/1590594444/)

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFH+HH69hTGvAxC30ARAuIAAJ9xyEsRgjd0L5X/s5/Lr+oeAvAEWwCdGUCB
61tYxcsQRWtLAHmhEVBnSoQ=S7l/
-----END PGP SIGNATURE-----

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com
To unsubscribe from this group, send email to
puppet-users-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en
-~----------~----~----~----~------~----~------~--~---

On Apr 5, 2008, at 11:47 PM, James Turnbull wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> jpruitt@juniper.net wrote:
> |
> | rake db:migrate
> | (in /var/www/rails/puppetshow)
> | rake aborted!
> | Mysql::Error: No database selected: SHOW FIELDS FROM `resource_tags`
>
> What user are you running the command as?  I found I needed root privs
> to run this on my hosts.
Hmm, that shouldn''t be the case.  There''s nothing that
requires root.
If you check the files out as a different user than the one that  
mongrel starts as you made need to change permissions on the files.   
There''s also this:  http://reductivelabs.com/trac/puppetshow/ticket/10

@Jeremy:  Do you have storeconfigs setup in your [puppetmasterd]  
section of puppet.conf?  If you''re running it from a machine
that''s
separate from puppetmasterd, then you need to populate the config/ 
database.yml file with the correct information.  (I''ll update the wiki
wit that when I get a chance)

-Blake

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com
To unsubscribe from this group, send email to
puppet-users-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en
-~----------~----~----~----~------~----~------~--~---

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Blake Barnett wrote:
| On Apr 5, 2008, at 11:47 PM, James Turnbull wrote:
|
|> -----BEGIN PGP SIGNED MESSAGE-----
|> Hash: SHA1
|>
|> jpruitt@juniper.net wrote:
|> |
|> | rake db:migrate
|> | (in /var/www/rails/puppetshow)
|> | rake aborted!
|> | Mysql::Error: No database selected: SHOW FIELDS FROM `resource_tags`
|>
|> What user are you running the command as?  I found I needed root privs
|> to run this on my hosts.
|
| Hmm, that shouldn''t be the case.  There''s nothing that
requires root.
| If you check the files out as a different user than the one that
| mongrel starts as you made need to change permissions on the files.
| There''s also this: 
http://reductivelabs.com/trac/puppetshow/ticket/10

I think the doco on the wiki needs to be clearer then - it needs to
indicate where permissions/users might be an issue.  Makes sense now but
I just gave up troubleshooting and ran as root. :)

Regards

James Turnbull

- --
James Turnbull (james@lovedthanlost.net)
- --
Author of:
- - Pulling Strings with Puppet
(http://www.amazon.com/gp/product/1590599780/)
- - Pro Nagios 2.0
(http://www.amazon.com/gp/product/1590596099/)
- - Hardening Linux
(http://www.amazon.com/gp/product/1590594444/)

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFH+UXk9hTGvAxC30ARAj1rAKClF21SzVtPI1JpvjWuNjL31xJxZQCdFOXy
7BjJyOWOUT3wQHBw9rqjezc=MbtO
-----END PGP SIGNATURE-----

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com
To unsubscribe from this group, send email to
puppet-users-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en
-~----------~----~----~----~------~----~------~--~---

You need to set ''dbname'' in your puppet.conf so that
PuppetShow can read it.

Stumbled over this last time I installed it :>

Arjuna Christensen | Systems Engineer 
Maximum Internet Ltd
7a Parkhead Pl, Albany, North Shore, 0632 | PO Box 8006, Auckland, 1150, NZ
DDI: + 64 9 913 9683 | Ph: +64 9 915 1825 | Fax:: +64 9 300 7227
arjuna.christensen@maxnet.co.nz| www.maxnet.co.nz
________________________________ 
Maxnet | mission critical internet 
________________________________ 
This email (including any attachments) is confidential and intended only for the
person to whom it is addressed.
If you have received this email in error, please notify the sender immediately
and erase all copies of this message
and attachments. The views expressed in this email do not necessarily reflect
those held by Maxnet.


-----Original Message-----
From: puppet-users@googlegroups.com [mailto:puppet-users@googlegroups.com] On
Behalf Of James Turnbull
Sent: Monday, 7 April 2008 9:52 a.m.
To: puppet-users@googlegroups.com
Subject: [Puppet Users] Re: Getting another MySQL error, this time with
puppetshow...


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Blake Barnett wrote:
| On Apr 5, 2008, at 11:47 PM, James Turnbull wrote:
|
|> -----BEGIN PGP SIGNED MESSAGE-----
|> Hash: SHA1
|>
|> jpruitt@juniper.net wrote:
|> |
|> | rake db:migrate
|> | (in /var/www/rails/puppetshow)
|> | rake aborted!
|> | Mysql::Error: No database selected: SHOW FIELDS FROM `resource_tags`
|>
|> What user are you running the command as?  I found I needed root privs
|> to run this on my hosts.
|
| Hmm, that shouldn''t be the case.  There''s nothing that
requires root.
| If you check the files out as a different user than the one that
| mongrel starts as you made need to change permissions on the files.
| There''s also this: 
http://reductivelabs.com/trac/puppetshow/ticket/10

I think the doco on the wiki needs to be clearer then - it needs to
indicate where permissions/users might be an issue.  Makes sense now but
I just gave up troubleshooting and ran as root. :)

Regards

James Turnbull

- --
James Turnbull (james@lovedthanlost.net)
- --
Author of:
- - Pulling Strings with Puppet
(http://www.amazon.com/gp/product/1590599780/)
- - Pro Nagios 2.0
(http://www.amazon.com/gp/product/1590596099/)
- - Hardening Linux
(http://www.amazon.com/gp/product/1590594444/)

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFH+UXk9hTGvAxC30ARAj1rAKClF21SzVtPI1JpvjWuNjL31xJxZQCdFOXy
7BjJyOWOUT3wQHBw9rqjezc=MbtO
-----END PGP SIGNATURE-----



--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com
To unsubscribe from this group, send email to
puppet-users-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en
-~----------~----~----~----~------~----~------~--~---

I have tried it as root and as www-data, the user that owns the files,
using sudo -u www-data.

 - Jeremy

On Apr 5, 11:47 pm, James Turnbull <ja...@lovedthanlost.net>
wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> jpru...@juniper.net wrote:
>
> |
> | rake db:migrate
> | (in /var/www/rails/puppetshow)
> | rake aborted!
> | Mysql::Error: No database selected: SHOW FIELDS FROM `resource_tags`
>
> What user are you running the command as?  I found I needed root privs
> to run this on my hosts.
>
> Regards
>
> James Turnbull
>
> - --
> James Turnbull (ja...@lovedthanlost.net)
> - --
> Author of:
> - - Pulling Strings with Puppet
> (http://www.amazon.com/gp/product/1590599780/)
> - - Pro Nagios 2.0
> (http://www.amazon.com/gp/product/1590596099/)
> - - Hardening Linux
> (http://www.amazon.com/gp/product/1590594444/)
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.7 (Darwin)
> Comment: Using GnuPG with Mozilla -http://enigmail.mozdev.org
>
> iD8DBQFH+HH69hTGvAxC30ARAuIAAJ9xyEsRgjd0L5X/s5/Lr+oeAvAEWwCdGUCB
> 61tYxcsQRWtLAHmhEVBnSoQ> =S7l/
> -----END PGP SIGNATURE-----
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com
To unsubscribe from this group, send email to
puppet-users-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en
-~----------~----~----~----~------~----~------~--~---

Yes, I do have storeconfigs defined in my puppetmasterd section, and
they are working well. My existing home grown site uses this data just
fine, and it is running on the same server. Migrations worked fine on
my other site, just not on puppetshow.

I did populate the config/database.yml file just in case, but to no
avail.

Thanks, though!

On Apr 6, 11:18 am, Blake Barnett <sha...@gmail.com>
wrote:
> On Apr 5, 2008, at 11:47 PM, James Turnbull wrote:
>
>
>
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
>
> > jpru...@juniper.net wrote:
> > |
> > | rake db:migrate
> > | (in /var/www/rails/puppetshow)
> > | rake aborted!
> > | Mysql::Error: No database selected: SHOW FIELDS FROM `resource_tags`
>
> > What user are you running the command as?  I found I needed root privs
> > to run this on my hosts.
>
> Hmm, that shouldn''t be the case.  There''s nothing that
requires root.  
> If you check the files out as a different user than the one that  
> mongrel starts as you made need to change permissions on the files.  
> There''s also this:
 http://reductivelabs.com/trac/puppetshow/ticket/10
>
> @Jeremy:  Do you have storeconfigs setup in your [puppetmasterd]  
> section of puppet.conf?  If you''re running it from a machine
that''s  
> separate from puppetmasterd, then you need to populate the config/
> database.yml file with the correct information.  (I''ll update the
wiki  
> wit that when I get a chance)
>
> -Blake
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com
To unsubscribe from this group, send email to
puppet-users-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en
-~----------~----~----~----~------~----~------~--~---

That did it! Thanks!

Apparently that is not necessary for a functional storeconfigs setup,
but is necessary for a puppetshow migration.

Thanks to all of you for your quick responses and expertise. :)

On Apr 6, 3:12 pm, "Arjuna Christensen"
<arjuna.christen...@maxnet.co.nz> wrote:
> You need to set ''dbname'' in your puppet.conf so that
PuppetShow can read it.
>
> Stumbled over this last time I installed it :>
>
> Arjuna Christensen | Systems Engineer 
> Maximum Internet Ltd
> 7a Parkhead Pl, Albany, North Shore, 0632 | PO Box 8006, Auckland, 1150, NZ
> DDI: + 64 9 913 9683 | Ph: +64 9 915 1825 | Fax:: +64 9 300 7227
> arjuna.christen...@maxnet.co.nz|www.maxnet.co.nz
> ________________________________
> Maxnet | mission critical internet
> ________________________________
> This email (including any attachments) is confidential and intended only
for the person to whom it is addressed.
> If you have received this email in error, please notify the sender
immediately and erase all copies of this message
> and attachments. The views expressed in this email do not necessarily
reflect those held by Maxnet.
>
> -----Original Message-----
> From: puppet-users@googlegroups.com [mailto:puppet-users@googlegroups.com]
On Behalf Of James Turnbull
> Sent: Monday, 7 April 2008 9:52 a.m.
> To: puppet-users@googlegroups.com
> Subject: [Puppet Users] Re: Getting another MySQL error, this time with
puppetshow...
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Blake Barnett wrote:
> | On Apr 5, 2008, at 11:47 PM, James Turnbull wrote:
> |
> |> -----BEGIN PGP SIGNED MESSAGE-----
> |> Hash: SHA1
> |>
> |> jpru...@juniper.net wrote:
> |> |
> |> | rake db:migrate
> |> | (in /var/www/rails/puppetshow)
> |> | rake aborted!
> |> | Mysql::Error: No database selected: SHOW FIELDS FROM
`resource_tags`
> |>
> |> What user are you running the command as?  I found I needed root
privs
> |> to run this on my hosts.
> |
> | Hmm, that shouldn''t be the case.  There''s nothing that
requires root.
> | If you check the files out as a different user than the one that
> | mongrel starts as you made need to change permissions on the files.
> | There''s also this:
 http://reductivelabs.com/trac/puppetshow/ticket/10
>
> I think the doco on the wiki needs to be clearer then - it needs to
> indicate where permissions/users might be an issue.  Makes sense now but
> I just gave up troubleshooting and ran as root. :)
>
> Regards
>
> James Turnbull
>
> - --
> James Turnbull (ja...@lovedthanlost.net)
> - --
> Author of:
> - - Pulling Strings with Puppet
> (http://www.amazon.com/gp/product/1590599780/)
> - - Pro Nagios 2.0
> (http://www.amazon.com/gp/product/1590596099/)
> - - Hardening Linux
> (http://www.amazon.com/gp/product/1590594444/)
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.7 (Darwin)
> Comment: Using GnuPG with Mozilla -http://enigmail.mozdev.org
>
> iD8DBQFH+UXk9hTGvAxC30ARAj1rAKClF21SzVtPI1JpvjWuNjL31xJxZQCdFOXy
> 7BjJyOWOUT3wQHBw9rqjezc> =MbtO
> -----END PGP SIGNATURE-----
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com
To unsubscribe from this group, send email to
puppet-users-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en
-~----------~----~----~----~------~----~------~--~---

Hmm.. did you name it something other than puppet?  I think that''s  
what I default to if nothing is specified...  I''ll double-check and  
fix it if not.

-Blake

On Apr 6, 2008, at 4:04 PM, jpruitt@juniper.net wrote:
>
> That did it! Thanks!
>
> Apparently that is not necessary for a functional storeconfigs setup,
> but is necessary for a puppetshow migration.
>
> Thanks to all of you for your quick responses and expertise. :)
>
> On Apr 6, 3:12 pm, "Arjuna Christensen"
> <arjuna.christen...@maxnet.co.nz> wrote:
>> You need to set ''dbname'' in your puppet.conf so that
PuppetShow can
>> read it.
>>
>> Stumbled over this last time I installed it :>
>>
>> Arjuna Christensen | Systems Engineer
>> Maximum Internet Ltd
>> 7a Parkhead Pl, Albany, North Shore, 0632 | PO Box 8006, Auckland,  
>> 1150, NZ
>> DDI: + 64 9 913 9683 | Ph: +64 9 915 1825 | Fax:: +64 9 300 7227
>> arjuna.christen...@maxnet.co.nz|www.maxnet.co.nz
>> ________________________________
>> Maxnet | mission critical internet
>> ________________________________
>> This email (including any attachments) is confidential and intended  
>> only for the person to whom it is addressed.
>> If you have received this email in error, please notify the sender  
>> immediately and erase all copies of this message
>> and attachments. The views expressed in this email do not  
>> necessarily reflect those held by Maxnet.
>>
>> -----Original Message-----
>> From: puppet-users@googlegroups.com
[mailto:puppet-users@googlegroups.com
>> ] On Behalf Of James Turnbull
>> Sent: Monday, 7 April 2008 9:52 a.m.
>> To: puppet-users@googlegroups.com
>> Subject: [Puppet Users] Re: Getting another MySQL error, this time  
>> with puppetshow...
>>
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> Blake Barnett wrote:
>> | On Apr 5, 2008, at 11:47 PM, James Turnbull wrote:
>> |
>> |> -----BEGIN PGP SIGNED MESSAGE-----
>> |> Hash: SHA1
>> |>
>> |> jpru...@juniper.net wrote:
>> |> |
>> |> | rake db:migrate
>> |> | (in /var/www/rails/puppetshow)
>> |> | rake aborted!
>> |> | Mysql::Error: No database selected: SHOW FIELDS FROM  
>> `resource_tags`
>> |>
>> |> What user are you running the command as?  I found I needed root
>> privs
>> |> to run this on my hosts.
>> |
>> | Hmm, that shouldn''t be the case.  There''s nothing
that requires
>> root.
>> | If you check the files out as a different user than the one that
>> | mongrel starts as you made need to change permissions on the files.
>> | There''s also this: 
http://reductivelabs.com/trac/puppetshow/ticket/10
>>
>> I think the doco on the wiki needs to be clearer then - it needs to
>> indicate where permissions/users might be an issue.  Makes sense  
>> now but
>> I just gave up troubleshooting and ran as root. :)
>>
>> Regards
>>
>> James Turnbull
>>
>> - --
>> James Turnbull (ja...@lovedthanlost.net)
>> - --
>> Author of:
>> - - Pulling Strings with Puppet
>> (http://www.amazon.com/gp/product/1590599780/)
>> - - Pro Nagios 2.0
>> (http://www.amazon.com/gp/product/1590596099/)
>> - - Hardening Linux
>> (http://www.amazon.com/gp/product/1590594444/)
>>
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.4.7 (Darwin)
>> Comment: Using GnuPG with Mozilla -http://enigmail.mozdev.org
>>
>> iD8DBQFH+UXk9hTGvAxC30ARAj1rAKClF21SzVtPI1JpvjWuNjL31xJxZQCdFOXy
>> 7BjJyOWOUT3wQHBw9rqjezc>> =MbtO
>> -----END PGP SIGNATURE-----
> >

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com
To unsubscribe from this group, send email to
puppet-users-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en
-~----------~----~----~----~------~----~------~--~---

Nope, I didn''t change the default. But, as soon as I added "dbname
puppet" all was well.

 - Jeremy

On Apr 6, 6:27 pm, Blake Barnett <sha...@gmail.com>
wrote:
> Hmm.. did you name it something other than puppet?  I think that''s
 
> what I default to if nothing is specified...  I''ll double-check
and  
> fix it if not.
>
> -Blake
>
> On Apr 6, 2008, at 4:04 PM, jpru...@juniper.net wrote:
>
>
>
> > That did it! Thanks!
>
> > Apparently that is not necessary for a functional storeconfigs setup,
> > but is necessary for a puppetshow migration.
>
> > Thanks to all of you for your quick responses and expertise. :)
>
> > On Apr 6, 3:12 pm, "Arjuna Christensen"
> > <arjuna.christen...@maxnet.co.nz> wrote:
> >> You need to set ''dbname'' in your puppet.conf so
that PuppetShow can  
> >> read it.
>
> >> Stumbled over this last time I installed it :>
>
> >> Arjuna Christensen | Systems Engineer
> >> Maximum Internet Ltd
> >> 7a Parkhead Pl, Albany, North Shore, 0632 | PO Box 8006, Auckland,
 
> >> 1150, NZ
> >> DDI: + 64 9 913 9683 | Ph: +64 9 915 1825 | Fax:: +64 9 300 7227
> >> arjuna.christen...@maxnet.co.nz|www.maxnet.co.nz
> >> ________________________________
> >> Maxnet | mission critical internet
> >> ________________________________
> >> This email (including any attachments) is confidential and
intended  
> >> only for the person to whom it is addressed.
> >> If you have received this email in error, please notify the sender
 
> >> immediately and erase all copies of this message
> >> and attachments. The views expressed in this email do not  
> >> necessarily reflect those held by Maxnet.
>
> >> -----Original Message-----
> >> From: puppet-users@googlegroups.com
[mailto:puppet-users@googlegroups.com
> >> ] On Behalf Of James Turnbull
> >> Sent: Monday, 7 April 2008 9:52 a.m.
> >> To: puppet-users@googlegroups.com
> >> Subject: [Puppet Users] Re: Getting another MySQL error, this time
 
> >> with puppetshow...
>
> >> -----BEGIN PGP SIGNED MESSAGE-----
> >> Hash: SHA1
>
> >> Blake Barnett wrote:
> >> | On Apr 5, 2008, at 11:47 PM, James Turnbull wrote:
> >> |
> >> |> -----BEGIN PGP SIGNED MESSAGE-----
> >> |> Hash: SHA1
> >> |>
> >> |> jpru...@juniper.net wrote:
> >> |> |
> >> |> | rake db:migrate
> >> |> | (in /var/www/rails/puppetshow)
> >> |> | rake aborted!
> >> |> | Mysql::Error: No database selected: SHOW FIELDS FROM  
> >> `resource_tags`
> >> |>
> >> |> What user are you running the command as?  I found I needed
root  
> >> privs
> >> |> to run this on my hosts.
> >> |
> >> | Hmm, that shouldn''t be the case.  There''s
nothing that requires  
> >> root.
> >> | If you check the files out as a different user than the one that
> >> | mongrel starts as you made need to change permissions on the
files.
> >> | There''s also this:
 http://reductivelabs.com/trac/puppetshow/ticket/10
>
> >> I think the doco on the wiki needs to be clearer then - it needs
to
> >> indicate where permissions/users might be an issue.  Makes sense  
> >> now but
> >> I just gave up troubleshooting and ran as root. :)
>
> >> Regards
>
> >> James Turnbull
>
> >> - --
> >> James Turnbull (ja...@lovedthanlost.net)
> >> - --
> >> Author of:
> >> - - Pulling Strings with Puppet
> >> (http://www.amazon.com/gp/product/1590599780/)
> >> - - Pro Nagios 2.0
> >> (http://www.amazon.com/gp/product/1590596099/)
> >> - - Hardening Linux
> >> (http://www.amazon.com/gp/product/1590594444/)
>
> >> -----BEGIN PGP SIGNATURE-----
> >> Version: GnuPG v1.4.7 (Darwin)
> >> Comment: Using GnuPG with Mozilla -http://enigmail.mozdev.org
>
> >> iD8DBQFH+UXk9hTGvAxC30ARAj1rAKClF21SzVtPI1JpvjWuNjL31xJxZQCdFOXy
> >> 7BjJyOWOUT3wQHBw9rqjezc> >> =MbtO
> >> -----END PGP SIGNATURE-----
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To post to this group, send email to puppet-users@googlegroups.com
To unsubscribe from this group, send email to
puppet-users-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en
-~----------~----~----~----~------~----~------~--~---