Niels Kristian Bech Jensen
1999-Nov-23 09:46 UTC
[PATCH] Adding BSD compatible install script to 1.2pre14.
Hi,
This patch adds a BSD compatible install script (copied from gcc-2.95.2)
to 1.2pre14. The script has a X-style license. The script will be used if
configure doesn't find a proper install program on the system.
Remember to run autoconf and set execute (755) permissions for install-sh
when the patch has been applied.
--
Niels Kristian Bech Jensen -- nkbj at image.dk -- http://www.image.dk/~nkbj/
----------->> Stop software piracy --- use free software!
<<-----------
-------------- next part --------------
diff -urN openssh-1.2pre14.orig/Makefile.in openssh-1.2pre14/Makefile.in
--- openssh-1.2pre14.orig/Makefile.in Tue Nov 23 10:43:16 1999
+++ openssh-1.2pre14/Makefile.in Tue Nov 23 10:42:07 1999
@@ -17,6 +17,7 @@
LIBS=@LIBS@
AR=@AR@
RANLIB=@RANLIB@
+INSTALL=@INSTALL@
GNOME_CFLAGS=`gnome-config --cflags gnome gnomeui`
GNOME_LIBS=`gnome-config --libs gnome gnomeui`
@@ -61,40 +62,40 @@
rm -f *.o core $(TARGETS) config.status config.cache config.log
install: all
- install -d $(bindir)
- install -d $(sbindir)
- install -d $(mandir)
- install -d $(mandir)/man1
- install -d $(mandir)/man8
- install -s -c ssh $(bindir)/ssh
- install -s -c scp $(bindir)/scp
- install -s -c ssh-add $(bindir)/ssh-add
- install -s -c ssh-agent $(bindir)/ssh-agent
- install -s -c ssh-keygen $(bindir)/ssh-keygen
- install -s -c sshd $(sbindir)/sshd
- install -m644 -c ssh.1 $(mandir)/man1/ssh.1
- install -m644 -c scp.1 $(mandir)/man1/scp.1
- install -m644 -c ssh-add.1 $(mandir)/man1/ssh-add.1
- install -m644 -c ssh-agent.1 $(mandir)/man1/ssh-agent.1
- install -m644 -c ssh-keygen.1 $(mandir)/man1/ssh-keygen.1
- install -m644 -c sshd.8 $(mandir)/man8/sshd.8
+ $(INSTALL) -d $(bindir)
+ $(INSTALL) -d $(sbindir)
+ $(INSTALL) -d $(mandir)
+ $(INSTALL) -d $(mandir)/man1
+ $(INSTALL) -d $(mandir)/man8
+ $(INSTALL) -s ssh $(bindir)/ssh
+ $(INSTALL) -s scp $(bindir)/scp
+ $(INSTALL) -s ssh-add $(bindir)/ssh-add
+ $(INSTALL) -s ssh-agent $(bindir)/ssh-agent
+ $(INSTALL) -s ssh-keygen $(bindir)/ssh-keygen
+ $(INSTALL) -s sshd $(sbindir)/sshd
+ $(INSTALL) -m644 ssh.1 $(mandir)/man1/ssh.1
+ $(INSTALL) -m644 scp.1 $(mandir)/man1/scp.1
+ $(INSTALL) -m644 ssh-add.1 $(mandir)/man1/ssh-add.1
+ $(INSTALL) -m644 ssh-agent.1 $(mandir)/man1/ssh-agent.1
+ $(INSTALL) -m644 ssh-keygen.1 $(mandir)/man1/ssh-keygen.1
+ $(INSTALL) -m644 sshd.8 $(mandir)/man8/sshd.8
ln -sf ssh $(bindir)/slogin
ln -sf ssh.1 $(mandir)/man1/slogin.1
if [ "x at INSTALL_ASKPASS@" = "xyes" ] ; then \
- install -d $(libexecdir) ; \
- install -d $(libexecdir)/ssh ; \
+ $(INSTALL) -d $(libexecdir) ; \
+ $(INSTALL) -d $(libexecdir)/ssh ; \
if [ -z "@GNOME_ASKPASS@" ] ; then \
- install -m755 -c ssh-askpass ${ASKPASS_PROGRAM}; \
+ $(INSTALL) -m755 ssh-askpass ${ASKPASS_PROGRAM}; \
else \
- install -m755 -c gnome-ssh-askpass ${ASKPASS_PROGRAM}; \
+ $(INSTALL) -m755 gnome-ssh-askpass ${ASKPASS_PROGRAM}; \
fi ; \
fi
if [ ! -f $(sysconfdir)/ssh_config -a ! -f $(sysconfdir)/sshd_config ]; then \
- install -d $(sysconfdir); \
- install -m644 ssh_config $(sysconfdir)/ssh_config; \
- install -m644 sshd_config $(sysconfdir)/sshd_config; \
+ $(INSTALL) -d $(sysconfdir); \
+ $(INSTALL) -m644 ssh_config $(sysconfdir)/ssh_config; \
+ $(INSTALL) -m644 sshd_config $(sysconfdir)/sshd_config; \
fi
distclean: clean
diff -urN openssh-1.2pre14.orig/configure.in openssh-1.2pre14/configure.in
--- openssh-1.2pre14.orig/configure.in Mon Nov 22 06:11:05 1999
+++ openssh-1.2pre14/configure.in Tue Nov 23 10:38:55 1999
@@ -6,6 +6,7 @@
AC_PROG_CC
AC_PROG_CPP
AC_PROG_RANLIB
+AC_PROG_INSTALL
AC_CHECK_PROG(AR, ar, ar)
if test "$GCC" = "yes"; then CFLAGS="$CFLAGS
-Wall"; fi
diff -urN openssh-1.2pre14.orig/install-sh openssh-1.2pre14/install-sh
--- openssh-1.2pre14.orig/install-sh Thu Jan 1 01:00:00 1970
+++ openssh-1.2pre14/install-sh Mon Oct 12 12:44:57 1998
@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission. M.I.T. makes no representations about the
+# suitability of this software for any purpose. It is provided "as
is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env.
vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd="$cpprog"
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd="$stripprog"
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ # this colon is to work around a 386BSD /bin/sh bug
+ :
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+done
+
+if [ x"$src" = x ]
+then
+ echo "install: no input file specified"
+ exit 1
+else
+ true
+fi
+
+if [ x"$dir_arg" != x ]; then
+ dst=$src
+ src=""
+
+ if [ -d $dst ]; then
+ instcmd=:
+ chmodcmd=""
+ else
+ instcmd=mkdir
+ fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp"
command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+ if [ -f $src -o -d $src ]
+ then
+ true
+ else
+ echo "install: $src does not exist"
+ exit 1
+ fi
+
+ if [ x"$dst" = x ]
+ then
+ echo "install: no destination specified"
+ exit 1
+ else
+ true
+ fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+ if [ -d $dst ]
+ then
+ dst="$dst"/`basename $src`
+ else
+ true
+ fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+# this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+ pathcomp="${pathcomp}${1}"
+ shift
+
+ if [ ! -d "${pathcomp}" ] ;
+ then
+ $mkdirprog "${pathcomp}"
+ else
+ true
+ fi
+
+ pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+ $doit $instcmd $dst &&
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi
&&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi
&&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi
&&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+ if [ x"$transformarg" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ dstfile=`basename $dst $transformbasename |
+ sed $transformarg`$transformbasename
+ fi
+
+# don't allow the sed command to completely eliminate the filename
+
+ if [ x"$dstfile" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ true
+ fi
+
+# Make a temp file name in the proper directory.
+
+ dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+ $doit $instcmd $src $dsttmp &&
+
+ trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing. If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi
&&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi
&&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi
&&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi
&&
+
+# Now rename the file to the real destination.
+
+ $doit $rmcmd -f $dstdir/$dstfile &&
+ $doit $mvcmd $dsttmp $dstdir/$dstfile
+
+fi &&
+
+
+exit 0
Maybe Matching Threads
Wisdom of the Ancients
