Roberto Sassu
2022-Dec-01 10:41 UTC
[Ocfs2-devel] [PATCH v7 0/6] evm: Do HMAC of multiple per LSM xattrs for new inodes
From: Roberto Sassu <roberto.sassu at huawei.com> One of the major goals of LSM stacking is to run multiple LSMs side by side without interfering with each other. The ultimate decision will depend on individual LSM decision. Several changes need to be made to the LSM infrastructure to be able to support that. This patch set tackles one of them: gives to each LSM the ability to specify one or multiple xattrs to be set at inode creation time and, at the same time, gives to EVM the ability to access all those xattrs and calculate the HMAC on them. The first problem that this patch set addresses is to make the inode_init_security hook definition suitable to use with EVM which, unlike other LSMs, needs to have visibility of all xattrs and not only the one that the LSM infrastructure passes to the LSM to be set. The solution is to replace in the inode_init_security definition the name/value/len parameters with the beginning of the array containing all xattrs set by LSMs. Due to security_old_inode_init_security() API limitation of setting only one xattr, it has been dropped and the remaining users, ocfs2 and reiserfs, switch to security_inode_init_security(). However, due to the complexity of the changes required to fully exploit the ability of security_inode_init_security() to set multiple xattrs, those users can still set only one xattr (the first set in the xattr array) where previously they called security_old_inode_init_security(). Furthermore, while EVM is invoked unlike before, its xattr will not be set as it would not be the first set in the xattr array, or if it is the first, there would not be protected xattrs to calculate the HMAC on. The second problem this patch set addresses is the limitation of the call_int_hook() of stopping the loop when the return value from a hook implementation is not zero. Unfortunately, for the inode_init_security hook it is a legitimate case to return -EOPNOTSUPP, but this would not necessarily mean that there is an error to report to the LSM infrastructure but just that an LSM does not will to set an xattr. Other LSMs should be still consulted as well. The solution for this specific case is to replace the call_int_hook() with the loop itself, so that -EOPNOTSUPP can be ignored. Next, this patch set removes the limitation of creating only two xattrs, one by an active LSM and another by EVM. This patch set extends the reservation mechanism of the LSM infrastructure, to allow each LSM to request one or multiple xattrs. While this could potentially lead to reaching the filesystem limits of number/size of the xattrs, it seems not an issue that need to be solved by the LSM infrastructure but by the filesystems themselves. Currently, if the limit is reached, the only workaround would be to use fewer LSMs. The reservation mechanism concept makes it very easy for LSMs to position themselves correctly in the xattr array, as the LSM infrastructure at initialization time changes the number of xattrs requested by each LSM with an offset. LSMs can just take that offset as the starting index in the xattr array and fill the next slots depending on how many xattrs they requested. However, while this concept is intuitive, it needs extra care. While for security blobs (the main reason of the reservation mechanism) it is not relevant for an LSM if other LSMs filled their portion, it matters for xattrs, as both EVM and initxattrs() callbacks scan the entire array until a terminator (xattr with NULL name). If an LSM did not provide an xattr, which could happen if it is loaded but not initialized, consumers of the xattr array would stop prematurely. This patch set avoids this problem by compacting the xattr array each time after an LSM executed its implementation of the inode_init_security hook. It needs to be done after each LSM, and not after all, since there might be LSMs scanning that xattr array too. Compacting the array after all LSMs would be too late. Finally, this patch set modifies the evm_inode_init_security() definition to be compatible with the inode_init_security hook definition and adds support for scanning the whole xattr array and for calculating the HMAC on all xattrs provided by LSMs. This patch set has been tested by introducing several instances of a TestLSM (some providing an xattr, some not, one with a wrong implementation to see how the LSM infrastructure handles it, one providing multiple xattrs and another providing an xattr but in a disabled state). The patch is not included in this set but it is available here: https://github.com/robertosassu/linux/commit/e13a03236df0c399dccb73df5fe4cfceb4bb1d89 The test, added to ima-evm-utils, is available here: https://github.com/robertosassu/ima-evm-utils/blob/evm-multiple-lsms-v5-devel-v3/tests/evm_multiple_lsms.test The test takes a UML kernel built by Github Actions and launches it several times, each time with a different combination of LSMs and filesystems (ext4, reiserfs, ocfs2). After boot, it first checks that there is an xattr for each LSM providing it (for reiserfs and ocfs2 just the first LSM), and then (for ext4) calculates the HMAC in user space and compares it with the HMAC calculated by EVM in kernel space. A test report can be obtained here: https://github.com/robertosassu/ima-evm-utils/actions/runs/3525619568/jobs/5912560168 The patch set has been tested with both the SElinux and Smack test suites. Below, there is the summary of the test results: SELinux Test Suite result (without patches): Files=73, Tests=1346, 225 wallclock secs ( 0.43 usr 0.23 sys + 6.11 cusr 58.70 csys = 65.47 CPU) Result: FAIL Failed 4/73 test programs. 13/1346 subtests failed. SELinux Test Suite result (with patches): Files=73, Tests=1346, 225 wallclock secs ( 0.44 usr 0.22 sys + 6.15 cusr 59.94 csys = 66.75 CPU) Result: FAIL Failed 4/73 test programs. 13/1346 subtests failed. Smack Test Suite result (without patches): 95 Passed, 0 Failed, 100% Success rate Smack Test Suite result (with patches): 95 Passed, 0 Failed, 100% Success rate Changelog v6: - Add a comment in Smack to introduce its xattrs (suggested by Casey) - Document the overloaded meaning of -EOPNOTSUPP in security_inode_init_security() (suggested by Mimi) v5: - Modify the cover letter to explain that the goal of this patch set is supporting multiple per LSM xattrs in EVM, and not moving IMA and EVM to the LSM infrastructure (suggested by Mimi) - Remove references in the patches description about moving IMA and EVM to the LSM infrastructure (suggested by Mimi) - Explain that the additional EVM invocation due to the switch to security_inode_init_security() will not cause the EVM xattr to be added (suggested by Mimi) v4: - Remove patch to call reiserfs_security_free(), already queued - Switch ocfs2 and reiserfs to security_inode_init_security() (suggested by Mimi) - Remove security_old_inode_init_security() (suggested by Paul) - Rename security_check_compact_xattrs() to security_check_compact_filled_xattrs() and add function description (suggested by Mimi) - Rename checked_xattrs parameter of security_check_compact_filled_xattrs() to num_filled_xattrs (suggested by Mimi) - Rename cur_xattrs variable in security_inode_init_security() to num_filled_xattrs (suggested by Mimi) v3: - Don't free the xattr name in reiserfs_security_free() - Don't include fs_data parameter in inode_init_security hook - Don't change evm_inode_init_security(), as it will be removed if EVM is stacked - Fix inode_init_security hook documentation - Drop lsm_find_xattr_slot(), use simple xattr reservation mechanism and introduce security_check_compact_xattrs() to compact the xattr array - Don't allocate xattr array if LSMs didn't reserve any xattr - Return zero if initxattrs() is not provided to security_inode_init_security(), -EOPNOTSUPP if value is not provided to security_old_inode_init_security() - Request LSMs to fill xattrs if only value (not the triple) is provided to security_old_inode_init_security(), to avoid unnecessary memory allocation v2: - rewrite selinux_old_inode_init_security() to use security_inode_init_security() - add lbs_xattr field to lsm_blob_sizes structure, to give the ability to LSMs to reserve slots in the xattr array (suggested by Casey) - add new parameter base_slot to inode_init_security hook definition v1: - add calls to reiserfs_security_free() and initialize sec->value to NULL (suggested by Tetsuo and Mimi) - change definition of inode_init_security hook, replace the name, value and len triple with the xattr array (suggested by Casey) - introduce lsm_find_xattr_slot() helper for LSMs to find an unused slot in the passed xattr array Roberto Sassu (6): reiserfs: Switch to security_inode_init_security() ocfs2: Switch to security_inode_init_security() security: Remove security_old_inode_init_security() security: Allow all LSMs to provide xattrs for inode_init_security hook evm: Align evm_inode_init_security() definition with LSM infrastructure evm: Support multiple LSMs providing an xattr fs/ocfs2/namei.c | 18 ++--- fs/ocfs2/xattr.c | 30 ++++++- fs/reiserfs/xattr_security.c | 23 ++++-- include/linux/evm.h | 12 +-- include/linux/lsm_hook_defs.h | 3 +- include/linux/lsm_hooks.h | 17 ++-- include/linux/security.h | 12 --- security/integrity/evm/evm.h | 2 + security/integrity/evm/evm_crypto.c | 9 ++- security/integrity/evm/evm_main.c | 28 +++++-- security/security.c | 121 +++++++++++++++++++++------- security/selinux/hooks.c | 19 +++-- security/smack/smack_lsm.c | 33 +++++--- 13 files changed, 226 insertions(+), 101 deletions(-) -- 2.25.1
Roberto Sassu
2022-Dec-01 10:41 UTC
[Ocfs2-devel] [PATCH v7 1/6] reiserfs: Switch to security_inode_init_security()
From: Roberto Sassu <roberto.sassu at huawei.com> In preparation for removing security_old_inode_init_security(), switch to security_inode_init_security(). Define the initxattrs callback reiserfs_initxattrs(), to populate the name/value/len triple in the reiserfs_security_handle() with the first xattr provided by LSMs. Make a copy of the xattr value, as security_inode_init_security() frees it. After the call to security_inode_init_security(), remove the check for returning -EOPNOTSUPP, as security_inode_init_security() changes it to zero. Multiple xattrs are currently not supported, as the reiserfs_security_handle structure is exported to user space. As a consequence, even if EVM is invoked, it will not provide an xattr (if it is not the first to set it, its xattr will be discarded; if it is the first, it does not have xattrs to calculate the HMAC on). Signed-off-by: Roberto Sassu <roberto.sassu at huawei.com> Reviewed-by: Casey Schaufler <casey at schaufler-ca.com> --- fs/reiserfs/xattr_security.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/fs/reiserfs/xattr_security.c b/fs/reiserfs/xattr_security.c index 857a65b05726..0ba96757681d 100644 --- a/fs/reiserfs/xattr_security.c +++ b/fs/reiserfs/xattr_security.c @@ -39,6 +39,22 @@ static bool security_list(struct dentry *dentry) return !IS_PRIVATE(d_inode(dentry)); } +static int +reiserfs_initxattrs(struct inode *inode, const struct xattr *xattr_array, + void *fs_info) +{ + struct reiserfs_security_handle *sec = fs_info; + + sec->value = kmemdup(xattr_array->value, xattr_array->value_len, + GFP_KERNEL); + if (!sec->value) + return -ENOMEM; + + sec->name = xattr_array->name; + sec->length = xattr_array->value_len; + return 0; +} + /* Initializes the security context for a new inode and returns the number * of blocks needed for the transaction. If successful, reiserfs_security * must be released using reiserfs_security_free when the caller is done. */ @@ -56,12 +72,9 @@ int reiserfs_security_init(struct inode *dir, struct inode *inode, if (IS_PRIVATE(dir)) return 0; - error = security_old_inode_init_security(inode, dir, qstr, &sec->name, - &sec->value, &sec->length); + error = security_inode_init_security(inode, dir, qstr, + &reiserfs_initxattrs, sec); if (error) { - if (error == -EOPNOTSUPP) - error = 0; - sec->name = NULL; sec->value = NULL; sec->length = 0; -- 2.25.1
Roberto Sassu
2022-Dec-01 10:41 UTC
[Ocfs2-devel] [PATCH v7 2/6] ocfs2: Switch to security_inode_init_security()
From: Roberto Sassu <roberto.sassu at huawei.com> In preparation for removing security_old_inode_init_security(), switch to security_inode_init_security(). Extend the existing ocfs2_initxattrs() to take the ocfs2_security_xattr_info structure from fs_info, and populate the name/value/len triple with the first xattr provided by LSMs. As fs_info was not used before, ocfs2_initxattrs() can now handle the case of replicating the behavior of security_old_inode_init_security(), i.e. just obtaining the xattr, in addition to setting all xattrs provided by LSMs. Supporting multiple xattrs is not currently supported where security_old_inode_init_security() was called (mknod, symlink), as it requires non-trivial changes that can be done at a later time. Like for reiserfs, even if EVM is invoked, it will not provide an xattr (if it is not the first to set it, its xattr will be discarded; if it is the first, it does not have xattrs to calculate the HMAC on). Finally, modify the handling of the return value from ocfs2_init_security_get(). As security_inode_init_security() does not return -EOPNOTSUPP, remove this case and directly handle the error if the return value is not zero. However, the previous case of receiving -EOPNOTSUPP should be still taken into account, as security_inode_init_security() could return zero without setting xattrs and ocfs2 would consider it as if the xattr was set. Instead, if security_inode_init_security() returned zero, look at the xattr if it was set, and behave accordingly, i.e. set si->enable to zero to notify to the functions following ocfs2_init_security_get() that the xattr is not available (same as if security_old_inode_init_security() returned -EOPNOTSUPP). Signed-off-by: Roberto Sassu <roberto.sassu at huawei.com> Reviewed-by: Casey Schaufler <casey at schaufler-ca.com> --- fs/ocfs2/namei.c | 18 ++++++------------ fs/ocfs2/xattr.c | 30 ++++++++++++++++++++++++++---- 2 files changed, 32 insertions(+), 16 deletions(-) diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 05f32989bad6..55fba81cd2d1 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -242,6 +242,7 @@ static int ocfs2_mknod(struct user_namespace *mnt_userns, int want_meta = 0; int xattr_credits = 0; struct ocfs2_security_xattr_info si = { + .name = NULL, .enable = 1, }; int did_quota_inode = 0; @@ -315,12 +316,8 @@ static int ocfs2_mknod(struct user_namespace *mnt_userns, /* get security xattr */ status = ocfs2_init_security_get(inode, dir, &dentry->d_name, &si); if (status) { - if (status == -EOPNOTSUPP) - si.enable = 0; - else { - mlog_errno(status); - goto leave; - } + mlog_errno(status); + goto leave; } /* calculate meta data/clusters for setting security and acl xattr */ @@ -1805,6 +1802,7 @@ static int ocfs2_symlink(struct user_namespace *mnt_userns, int want_clusters = 0; int xattr_credits = 0; struct ocfs2_security_xattr_info si = { + .name = NULL, .enable = 1, }; int did_quota = 0, did_quota_inode = 0; @@ -1875,12 +1873,8 @@ static int ocfs2_symlink(struct user_namespace *mnt_userns, /* get security xattr */ status = ocfs2_init_security_get(inode, dir, &dentry->d_name, &si); if (status) { - if (status == -EOPNOTSUPP) - si.enable = 0; - else { - mlog_errno(status); - goto bail; - } + mlog_errno(status); + goto bail; } /* calculate meta data/clusters for setting security xattr */ diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 95d0611c5fc7..55699c573541 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -7259,9 +7259,21 @@ static int ocfs2_xattr_security_set(const struct xattr_handler *handler, static int ocfs2_initxattrs(struct inode *inode, const struct xattr *xattr_array, void *fs_info) { + struct ocfs2_security_xattr_info *si = fs_info; const struct xattr *xattr; int err = 0; + if (si) { + si->value = kmemdup(xattr_array->value, xattr_array->value_len, + GFP_KERNEL); + if (!si->value) + return -ENOMEM; + + si->name = xattr_array->name; + si->value_len = xattr_array->value_len; + return 0; + } + for (xattr = xattr_array; xattr->name != NULL; xattr++) { err = ocfs2_xattr_set(inode, OCFS2_XATTR_INDEX_SECURITY, xattr->name, xattr->value, @@ -7277,13 +7289,23 @@ int ocfs2_init_security_get(struct inode *inode, const struct qstr *qstr, struct ocfs2_security_xattr_info *si) { + int ret; + /* check whether ocfs2 support feature xattr */ if (!ocfs2_supports_xattr(OCFS2_SB(dir->i_sb))) return -EOPNOTSUPP; - if (si) - return security_old_inode_init_security(inode, dir, qstr, - &si->name, &si->value, - &si->value_len); + if (si) { + ret = security_inode_init_security(inode, dir, qstr, + &ocfs2_initxattrs, si); + /* + * security_inode_init_security() does not return -EOPNOTSUPP, + * we have to check the xattr ourselves. + */ + if (!ret && !si->name) + si->enable = 0; + + return ret; + } return security_inode_init_security(inode, dir, qstr, &ocfs2_initxattrs, NULL); -- 2.25.1
Roberto Sassu
2022-Dec-01 10:41 UTC
[Ocfs2-devel] [PATCH v7 3/6] security: Remove security_old_inode_init_security()
From: Roberto Sassu <roberto.sassu at huawei.com> As the remaining two users reiserfs and ocfs2 switched to security_inode_init_security(), security_old_inode_init_security() can be now removed. Out-of-tree kernel modules should switch to security_inode_init_security() too. Signed-off-by: Roberto Sassu <roberto.sassu at huawei.com> Reviewed-by: Casey Schaufler <casey at schaufler-ca.com> --- include/linux/security.h | 12 ------------ security/security.c | 11 ----------- 2 files changed, 23 deletions(-) diff --git a/include/linux/security.h b/include/linux/security.h index ca1b7109c0db..c682fc96ed61 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -336,9 +336,6 @@ int security_inode_init_security(struct inode *inode, struct inode *dir, int security_inode_init_security_anon(struct inode *inode, const struct qstr *name, const struct inode *context_inode); -int security_old_inode_init_security(struct inode *inode, struct inode *dir, - const struct qstr *qstr, const char **name, - void **value, size_t *len); int security_inode_create(struct inode *dir, struct dentry *dentry, umode_t mode); int security_inode_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_dentry); @@ -771,15 +768,6 @@ static inline int security_inode_init_security_anon(struct inode *inode, return 0; } -static inline int security_old_inode_init_security(struct inode *inode, - struct inode *dir, - const struct qstr *qstr, - const char **name, - void **value, size_t *len) -{ - return -EOPNOTSUPP; -} - static inline int security_inode_create(struct inode *dir, struct dentry *dentry, umode_t mode) diff --git a/security/security.c b/security/security.c index 79d82cb6e469..e2857446fd32 100644 --- a/security/security.c +++ b/security/security.c @@ -1132,17 +1132,6 @@ int security_inode_init_security_anon(struct inode *inode, context_inode); } -int security_old_inode_init_security(struct inode *inode, struct inode *dir, - const struct qstr *qstr, const char **name, - void **value, size_t *len) -{ - if (unlikely(IS_PRIVATE(inode))) - return -EOPNOTSUPP; - return call_int_hook(inode_init_security, -EOPNOTSUPP, inode, dir, - qstr, name, value, len); -} -EXPORT_SYMBOL(security_old_inode_init_security); - #ifdef CONFIG_SECURITY_PATH int security_path_mknod(const struct path *dir, struct dentry *dentry, umode_t mode, unsigned int dev) -- 2.25.1
Roberto Sassu
2022-Dec-01 10:41 UTC
[Ocfs2-devel] [PATCH v7 4/6] security: Allow all LSMs to provide xattrs for inode_init_security hook
From: Roberto Sassu <roberto.sassu at huawei.com> Currently, security_inode_init_security() supports only one LSM providing an xattr and EVM calculating the HMAC on that xattr, plus other inode metadata. Allow all LSMs to provide one or multiple xattrs, by extending the security blob reservation mechanism. Introduce the new lbs_xattr field of the lsm_blob_sizes structure, so that each LSM can specify how many xattrs it needs, and the LSM infrastructure knows how many xattr slots it should allocate. Dynamically allocate the xattrs array to be populated by LSMs with the inode_init_security hook, and pass it to the latter instead of the name/value/len triple. Update the documentation accordingly, and fix the description of the xattr name, as it is not allocated anymore. Since the LSM infrastructure, at initialization time, updates the number of the requested xattrs provided by each LSM with a corresponding offset in the security blob (in this case the xattr array), it makes straightforward for an LSM to access the right position in the xattr array. There is still the issue that an LSM might not fill the xattr, even if it requests it (legitimate case, for example it might have been loaded but not initialized with a policy). Since users of the xattr array (e.g. the initxattrs() callbacks) detect the end of the xattr array by checking if the xattr name is NULL, not filling an xattr would cause those users to stop scanning xattrs prematurely. Solve that issue by introducing security_check_compact_filled_xattrs(), which does a basic check of the xattr array (if the xattr name is filled, the xattr value should be too, and viceversa), and compacts the xattr array by removing the holes. An alternative solution would be to let users of the xattr array know the number of elements of that array, so that they don't have to check the termination. However, this seems more invasive, compared to a simple move of few array elements. security_check_compact_filled_xattrs() also determines how many xattrs in the xattr array have been filled. If there is none, skip evm_inode_init_security() and initxattrs(). Skipping the former also avoids EVM to crash the kernel, as it is expecting a filled xattr. Finally, adapt both SELinux and Smack to use the new definition of the inode_init_security hook, and to correctly fill the designated slots in the xattr array. For Smack, reserve space for the other defined xattrs although they are not set yet in smack_inode_init_security(). Reported-by: Nicolas Bouchinet <nicolas.bouchinet at clip-os.org> (EVM crash) Signed-off-by: Roberto Sassu <roberto.sassu at huawei.com> Reviewed-by: Casey Schaufler <casey at schaufler-ca.com> --- include/linux/lsm_hook_defs.h | 3 +- include/linux/lsm_hooks.h | 17 ++++-- security/security.c | 109 +++++++++++++++++++++++++++++----- security/selinux/hooks.c | 19 +++--- security/smack/smack_lsm.c | 33 ++++++---- 5 files changed, 140 insertions(+), 41 deletions(-) diff --git a/include/linux/lsm_hook_defs.h b/include/linux/lsm_hook_defs.h index ec119da1d89b..be344d0211f8 100644 --- a/include/linux/lsm_hook_defs.h +++ b/include/linux/lsm_hook_defs.h @@ -112,8 +112,7 @@ LSM_HOOK(int, 0, path_notify, const struct path *path, u64 mask, LSM_HOOK(int, 0, inode_alloc_security, struct inode *inode) LSM_HOOK(void, LSM_RET_VOID, inode_free_security, struct inode *inode) LSM_HOOK(int, 0, inode_init_security, struct inode *inode, - struct inode *dir, const struct qstr *qstr, const char **name, - void **value, size_t *len) + struct inode *dir, const struct qstr *qstr, struct xattr *xattrs) LSM_HOOK(int, 0, inode_init_security_anon, struct inode *inode, const struct qstr *name, const struct inode *context_inode) LSM_HOOK(int, 0, inode_create, struct inode *dir, struct dentry *dentry, diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h index 4ec80b96c22e..ba1655370643 100644 --- a/include/linux/lsm_hooks.h +++ b/include/linux/lsm_hooks.h @@ -229,18 +229,22 @@ * This hook is called by the fs code as part of the inode creation * transaction and provides for atomic labeling of the inode, unlike * the post_create/mkdir/... hooks called by the VFS. The hook function - * is expected to allocate the name and value via kmalloc, with the caller - * being responsible for calling kfree after using them. + * is expected to allocate the value via kmalloc, with the caller + * being responsible for calling kfree after using it. * If the security module does not use security attributes or does * not wish to put a security attribute on this particular inode, * then it should return -EOPNOTSUPP to skip this processing. * @inode contains the inode structure of the newly created inode. * @dir contains the inode structure of the parent directory. * @qstr contains the last path component of the new object - * @name will be set to the allocated name suffix (e.g. selinux). - * @value will be set to the allocated attribute value. - * @len will be set to the length of the value. - * Returns 0 if @name and @value have been successfully set, + * @xattrs contains the full array of xattrs provided by LSMs where + * ->name will be set to the name suffix (e.g. selinux). + * ->value will be set to the allocated attribute value. + * ->value_len will be set to the length of the value. + * Slots in @xattrs need to be reserved by LSMs by providing the number of + * the desired xattrs in the lbs_xattr field of the lsm_blob_sizes + * structure. + * Returns 0 if the requested slots in @xattrs have been successfully set, * -EOPNOTSUPP if no security attribute is needed, or * -ENOMEM on memory allocation failure. * @inode_init_security_anon: @@ -1624,6 +1628,7 @@ struct lsm_blob_sizes { int lbs_ipc; int lbs_msg_msg; int lbs_task; + int lbs_xattr; }; /* diff --git a/security/security.c b/security/security.c index e2857446fd32..36804609caaa 100644 --- a/security/security.c +++ b/security/security.c @@ -30,8 +30,6 @@ #include <linux/msg.h> #include <net/flow.h> -#define MAX_LSM_EVM_XATTR 2 - /* How many LSMs were built into the kernel? */ #define LSM_COUNT (__end_lsm_info - __start_lsm_info) @@ -210,6 +208,7 @@ static void __init lsm_set_blob_sizes(struct lsm_blob_sizes *needed) lsm_set_blob_size(&needed->lbs_msg_msg, &blob_sizes.lbs_msg_msg); lsm_set_blob_size(&needed->lbs_superblock, &blob_sizes.lbs_superblock); lsm_set_blob_size(&needed->lbs_task, &blob_sizes.lbs_task); + lsm_set_blob_size(&needed->lbs_xattr, &blob_sizes.lbs_xattr); } /* Prepare LSM for initialization. */ @@ -346,6 +345,7 @@ static void __init ordered_lsm_init(void) init_debug("msg_msg blob size = %d\n", blob_sizes.lbs_msg_msg); init_debug("superblock blob size = %d\n", blob_sizes.lbs_superblock); init_debug("task blob size = %d\n", blob_sizes.lbs_task); + init_debug("xattr slots = %d\n", blob_sizes.lbs_xattr); /* * Create any kmem_caches needed for blobs @@ -1089,37 +1089,116 @@ int security_dentry_create_files_as(struct dentry *dentry, int mode, } EXPORT_SYMBOL(security_dentry_create_files_as); +/** + * security_check_compact_filled_xattrs - check xattrs and make array contiguous + * @xattrs: xattr array filled by LSMs + * @num_xattrs: length of xattr array + * @num_filled_xattrs: number of already processed xattrs + * + * Ensure that each xattr slot is correctly filled and close the gaps in the + * xattr array if an LSM didn't provide an xattr for which it asked space + * (legitimate case, it might have been loaded but not initialized). An LSM + * might request space in the xattr array for one or multiple xattrs. The LSM + * infrastructure ensures that all requests by LSMs are satisfied. + * + * Track the number of filled xattrs in @num_filled_xattrs, so that it is easy + * to determine whether the currently processed xattr is fine in its position + * (if all previous xattrs were filled) or it should be moved after the last + * filled xattr. + * + * Return: zero if all xattrs are valid, -EINVAL otherwise. + */ +static int security_check_compact_filled_xattrs(struct xattr *xattrs, + int num_xattrs, + int *num_filled_xattrs) +{ + int i; + + for (i = *num_filled_xattrs; i < num_xattrs; i++) { + if ((!xattrs[i].name && xattrs[i].value) || + (xattrs[i].name && !xattrs[i].value)) + return -EINVAL; + + if (!xattrs[i].name) + continue; + + if (i == *num_filled_xattrs) { + (*num_filled_xattrs)++; + continue; + } + + memcpy(xattrs + (*num_filled_xattrs)++, xattrs + i, + sizeof(*xattrs)); + memset(xattrs + i, 0, sizeof(*xattrs)); + } + + return 0; +} + int security_inode_init_security(struct inode *inode, struct inode *dir, const struct qstr *qstr, const initxattrs initxattrs, void *fs_data) { - struct xattr new_xattrs[MAX_LSM_EVM_XATTR + 1]; - struct xattr *lsm_xattr, *evm_xattr, *xattr; - int ret; + struct security_hook_list *P; + struct xattr *new_xattrs; + struct xattr *xattr; + int ret = -EOPNOTSUPP, num_filled_xattrs = 0; if (unlikely(IS_PRIVATE(inode))) return 0; + if (!blob_sizes.lbs_xattr) + return 0; + if (!initxattrs) return call_int_hook(inode_init_security, -EOPNOTSUPP, inode, - dir, qstr, NULL, NULL, NULL); - memset(new_xattrs, 0, sizeof(new_xattrs)); - lsm_xattr = new_xattrs; - ret = call_int_hook(inode_init_security, -EOPNOTSUPP, inode, dir, qstr, - &lsm_xattr->name, - &lsm_xattr->value, - &lsm_xattr->value_len); - if (ret) + dir, qstr, NULL); + /* Allocate +1 for EVM and +1 as terminator. */ + new_xattrs = kcalloc(blob_sizes.lbs_xattr + 2, sizeof(*new_xattrs), + GFP_NOFS); + if (!new_xattrs) + return -ENOMEM; + + hlist_for_each_entry(P, &security_hook_heads.inode_init_security, + list) { + ret = P->hook.inode_init_security(inode, dir, qstr, new_xattrs); + if (ret && ret != -EOPNOTSUPP) + goto out; + /* + * As documented in lsm_hooks.h, -EOPNOTSUPP in this context + * means that the LSM is not willing to provide an xattr, not + * that it wants to signal an error. Thus, continue to invoke + * the remaining LSMs. + */ + if (ret == -EOPNOTSUPP) + continue; + /* + * As the number of xattrs reserved by LSMs is not directly + * available, directly use the total number blob_sizes.lbs_xattr + * to keep the code simple, while being not the most efficient + * way. + */ + ret = security_check_compact_filled_xattrs(new_xattrs, + blob_sizes.lbs_xattr, + &num_filled_xattrs); + if (ret < 0) { + ret = -ENOMEM; + goto out; + } + } + + if (!num_filled_xattrs) goto out; - evm_xattr = lsm_xattr + 1; - ret = evm_inode_init_security(inode, lsm_xattr, evm_xattr); + ret = evm_inode_init_security(inode, new_xattrs, + new_xattrs + num_filled_xattrs); if (ret) goto out; ret = initxattrs(inode, new_xattrs, fs_data); out: for (xattr = new_xattrs; xattr->value != NULL; xattr++) kfree(xattr->value); + kfree(new_xattrs); return (ret == -EOPNOTSUPP) ? 0 : ret; } EXPORT_SYMBOL(security_inode_init_security); diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index f553c370397e..57e5bc7c9ed8 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -104,6 +104,8 @@ #include "audit.h" #include "avc_ss.h" +#define SELINUX_INODE_INIT_XATTRS 1 + struct selinux_state selinux_state; /* SECMARK reference count */ @@ -2868,11 +2870,11 @@ static int selinux_dentry_create_files_as(struct dentry *dentry, int mode, static int selinux_inode_init_security(struct inode *inode, struct inode *dir, const struct qstr *qstr, - const char **name, - void **value, size_t *len) + struct xattr *xattrs) { const struct task_security_struct *tsec = selinux_cred(current_cred()); struct superblock_security_struct *sbsec; + struct xattr *xattr = NULL; u32 newsid, clen; int rc; char *context; @@ -2899,16 +2901,18 @@ static int selinux_inode_init_security(struct inode *inode, struct inode *dir, !(sbsec->flags & SBLABEL_MNT)) return -EOPNOTSUPP; - if (name) - *name = XATTR_SELINUX_SUFFIX; + if (xattrs) + xattr = xattrs + selinux_blob_sizes.lbs_xattr; + + if (xattr) { + xattr->name = XATTR_SELINUX_SUFFIX; - if (value && len) { rc = security_sid_to_context_force(&selinux_state, newsid, &context, &clen); if (rc) return rc; - *value = context; - *len = clen; + xattr->value = context; + xattr->value_len = clen; } return 0; @@ -6900,6 +6904,7 @@ struct lsm_blob_sizes selinux_blob_sizes __lsm_ro_after_init = { .lbs_ipc = sizeof(struct ipc_security_struct), .lbs_msg_msg = sizeof(struct msg_security_struct), .lbs_superblock = sizeof(struct superblock_security_struct), + .lbs_xattr = SELINUX_INODE_INIT_XATTRS, }; #ifdef CONFIG_PERF_EVENTS diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index b6306d71c908..aa6ffa22bbba 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -52,6 +52,15 @@ #define SMK_RECEIVING 1 #define SMK_SENDING 2 +/* + * Smack uses multiple xattrs. + * SMACK64 - for access control, SMACK64EXEC - label for the program, + * SMACK64MMAP - controls library loading, + * SMACK64TRANSMUTE - label initialization, + * Not saved on files - SMACK64IPIN and SMACK64IPOUT + */ +#define SMACK_INODE_INIT_XATTRS 4 + #ifdef SMACK_IPV6_PORT_LABELING static DEFINE_MUTEX(smack_ipv6_lock); static LIST_HEAD(smk_ipv6_port_list); @@ -939,26 +948,27 @@ static int smack_inode_alloc_security(struct inode *inode) * @inode: the newly created inode * @dir: containing directory object * @qstr: unused - * @name: where to put the attribute name - * @value: where to put the attribute value - * @len: where to put the length of the attribute + * @xattrs: where to put the attribute * * Returns 0 if it all works out, -ENOMEM if there's no memory */ static int smack_inode_init_security(struct inode *inode, struct inode *dir, - const struct qstr *qstr, const char **name, - void **value, size_t *len) + const struct qstr *qstr, + struct xattr *xattrs) { struct inode_smack *issp = smack_inode(inode); struct smack_known *skp = smk_of_current(); struct smack_known *isp = smk_of_inode(inode); struct smack_known *dsp = smk_of_inode(dir); + struct xattr *xattr = NULL; int may; - if (name) - *name = XATTR_SMACK_SUFFIX; + if (xattrs) + xattr = xattrs + smack_blob_sizes.lbs_xattr; + + if (xattr) { + xattr->name = XATTR_SMACK_SUFFIX; - if (value && len) { rcu_read_lock(); may = smk_access_entry(skp->smk_known, dsp->smk_known, &skp->smk_rules); @@ -976,11 +986,11 @@ static int smack_inode_init_security(struct inode *inode, struct inode *dir, issp->smk_flags |= SMK_INODE_CHANGED; } - *value = kstrdup(isp->smk_known, GFP_NOFS); - if (*value == NULL) + xattr->value = kstrdup(isp->smk_known, GFP_NOFS); + if (xattr->value == NULL) return -ENOMEM; - *len = strlen(isp->smk_known); + xattr->value_len = strlen(isp->smk_known); } return 0; @@ -4785,6 +4795,7 @@ struct lsm_blob_sizes smack_blob_sizes __lsm_ro_after_init = { .lbs_ipc = sizeof(struct smack_known *), .lbs_msg_msg = sizeof(struct smack_known *), .lbs_superblock = sizeof(struct superblock_smack), + .lbs_xattr = SMACK_INODE_INIT_XATTRS, }; static struct security_hook_list smack_hooks[] __lsm_ro_after_init = { -- 2.25.1
Roberto Sassu
2022-Dec-01 10:41 UTC
[Ocfs2-devel] [PATCH v7 5/6] evm: Align evm_inode_init_security() definition with LSM infrastructure
From: Roberto Sassu <roberto.sassu at huawei.com> Change the evm_inode_init_security() definition to align with the LSM infrastructure. Keep the existing behavior of including in the HMAC calculation only the first xattr provided by LSMs. Changing the evm_inode_init_security() definition requires passing only the xattr array allocated by security_inode_init_security(), instead of the first LSM xattr and the place where the EVM xattr should be filled. In lieu of passing the EVM xattr, EVM must position itself after the last filled xattr (by checking the xattr name), since only the beginning of the xattr array is given. Finally, make evm_inode_init_security() return value compatible with the inode_init_security hook conventions, i.e. return -EOPNOTSUPP if it is not setting an xattr. EVM is a bit tricky, because xattrs is both an input and an output. If it was just output, EVM should have returned zero if xattrs is NULL. But, since xattrs is also input, EVM is unable to do its calculations, so return -EOPNOTSUPP and handle this error in security_inode_init_security(). Signed-off-by: Roberto Sassu <roberto.sassu at huawei.com> Reviewed-by: Casey Schaufler <casey at schaufler-ca.com> --- include/linux/evm.h | 12 ++++++------ security/integrity/evm/evm_main.c | 20 +++++++++++++------- security/security.c | 5 ++--- 3 files changed, 21 insertions(+), 16 deletions(-) diff --git a/include/linux/evm.h b/include/linux/evm.h index aa63e0b3c0a2..3bb2ae9fe098 100644 --- a/include/linux/evm.h +++ b/include/linux/evm.h @@ -35,9 +35,9 @@ extern int evm_inode_removexattr(struct user_namespace *mnt_userns, struct dentry *dentry, const char *xattr_name); extern void evm_inode_post_removexattr(struct dentry *dentry, const char *xattr_name); -extern int evm_inode_init_security(struct inode *inode, - const struct xattr *xattr_array, - struct xattr *evm); +extern int evm_inode_init_security(struct inode *inode, struct inode *dir, + const struct qstr *qstr, + struct xattr *xattrs); extern bool evm_revalidate_status(const char *xattr_name); extern int evm_protected_xattr_if_enabled(const char *req_xattr_name); extern int evm_read_protected_xattrs(struct dentry *dentry, u8 *buffer, @@ -108,9 +108,9 @@ static inline void evm_inode_post_removexattr(struct dentry *dentry, return; } -static inline int evm_inode_init_security(struct inode *inode, - const struct xattr *xattr_array, - struct xattr *evm) +static inline int evm_inode_init_security(struct inode *inode, struct inode *dir, + const struct qstr *qstr, + struct xattr *xattrs) { return 0; } diff --git a/security/integrity/evm/evm_main.c b/security/integrity/evm/evm_main.c index 23d484e05e6f..0a312cafb7de 100644 --- a/security/integrity/evm/evm_main.c +++ b/security/integrity/evm/evm_main.c @@ -845,23 +845,29 @@ void evm_inode_post_setattr(struct dentry *dentry, int ia_valid) /* * evm_inode_init_security - initializes security.evm HMAC value */ -int evm_inode_init_security(struct inode *inode, - const struct xattr *lsm_xattr, - struct xattr *evm_xattr) +int evm_inode_init_security(struct inode *inode, struct inode *dir, + const struct qstr *qstr, + struct xattr *xattrs) { struct evm_xattr *xattr_data; + struct xattr *xattr, *evm_xattr; int rc; - if (!(evm_initialized & EVM_INIT_HMAC) || - !evm_protected_xattr(lsm_xattr->name)) - return 0; + if (!(evm_initialized & EVM_INIT_HMAC) || !xattrs || + !evm_protected_xattr(xattrs->name)) + return -EOPNOTSUPP; + + for (xattr = xattrs; xattr->value != NULL; xattr++) + ; + + evm_xattr = xattr; xattr_data = kzalloc(sizeof(*xattr_data), GFP_NOFS); if (!xattr_data) return -ENOMEM; xattr_data->data.type = EVM_XATTR_HMAC; - rc = evm_init_hmac(inode, lsm_xattr, xattr_data->digest); + rc = evm_init_hmac(inode, xattrs, xattr_data->digest); if (rc < 0) goto out; diff --git a/security/security.c b/security/security.c index 36804609caaa..44ce579daec1 100644 --- a/security/security.c +++ b/security/security.c @@ -1190,9 +1190,8 @@ int security_inode_init_security(struct inode *inode, struct inode *dir, if (!num_filled_xattrs) goto out; - ret = evm_inode_init_security(inode, new_xattrs, - new_xattrs + num_filled_xattrs); - if (ret) + ret = evm_inode_init_security(inode, dir, qstr, new_xattrs); + if (ret && ret != -EOPNOTSUPP) goto out; ret = initxattrs(inode, new_xattrs, fs_data); out: -- 2.25.1
Roberto Sassu
2022-Dec-01 10:41 UTC
[Ocfs2-devel] [PATCH v7 6/6] evm: Support multiple LSMs providing an xattr
From: Roberto Sassu <roberto.sassu at huawei.com> Currently, evm_inode_init_security() processes a single LSM xattr from the array passed by security_inode_init_security(), and calculates the HMAC on it and other inode metadata. Given that initxattrs() callbacks, called by security_inode_init_security(), expect that this array is terminated when the xattr name is set to NULL, reuse the same assumption to scan all xattrs and to calculate the HMAC on all of them. Signed-off-by: Roberto Sassu <roberto.sassu at huawei.com> Reviewed-by: Casey Schaufler <casey at schaufler-ca.com> --- security/integrity/evm/evm.h | 2 ++ security/integrity/evm/evm_crypto.c | 9 ++++++++- security/integrity/evm/evm_main.c | 16 +++++++++++----- 3 files changed, 21 insertions(+), 6 deletions(-) diff --git a/security/integrity/evm/evm.h b/security/integrity/evm/evm.h index f8b8c5004fc7..f799d72a59fa 100644 --- a/security/integrity/evm/evm.h +++ b/security/integrity/evm/evm.h @@ -46,6 +46,8 @@ struct evm_digest { char digest[IMA_MAX_DIGEST_SIZE]; } __packed; +int evm_protected_xattr(const char *req_xattr_name); + int evm_init_key(void); int evm_update_evmxattr(struct dentry *dentry, const char *req_xattr_name, diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c index 708de9656bbd..68f99faac316 100644 --- a/security/integrity/evm/evm_crypto.c +++ b/security/integrity/evm/evm_crypto.c @@ -389,6 +389,7 @@ int evm_init_hmac(struct inode *inode, const struct xattr *lsm_xattr, char *hmac_val) { struct shash_desc *desc; + const struct xattr *xattr; desc = init_desc(EVM_XATTR_HMAC, HASH_ALGO_SHA1); if (IS_ERR(desc)) { @@ -396,7 +397,13 @@ int evm_init_hmac(struct inode *inode, const struct xattr *lsm_xattr, return PTR_ERR(desc); } - crypto_shash_update(desc, lsm_xattr->value, lsm_xattr->value_len); + for (xattr = lsm_xattr; xattr->name != NULL; xattr++) { + if (!evm_protected_xattr(xattr->name)) + continue; + + crypto_shash_update(desc, xattr->value, xattr->value_len); + } + hmac_add_misc(desc, inode, EVM_XATTR_HMAC, hmac_val); kfree(desc); return 0; diff --git a/security/integrity/evm/evm_main.c b/security/integrity/evm/evm_main.c index 0a312cafb7de..1cf6871a0019 100644 --- a/security/integrity/evm/evm_main.c +++ b/security/integrity/evm/evm_main.c @@ -305,7 +305,7 @@ static int evm_protected_xattr_common(const char *req_xattr_name, return found; } -static int evm_protected_xattr(const char *req_xattr_name) +int evm_protected_xattr(const char *req_xattr_name) { return evm_protected_xattr_common(req_xattr_name, false); } @@ -851,14 +851,20 @@ int evm_inode_init_security(struct inode *inode, struct inode *dir, { struct evm_xattr *xattr_data; struct xattr *xattr, *evm_xattr; + bool evm_protected_xattrs = false; int rc; - if (!(evm_initialized & EVM_INIT_HMAC) || !xattrs || - !evm_protected_xattr(xattrs->name)) + if (!(evm_initialized & EVM_INIT_HMAC) || !xattrs) return -EOPNOTSUPP; - for (xattr = xattrs; xattr->value != NULL; xattr++) - ; + for (xattr = xattrs; xattr->value != NULL; xattr++) { + if (evm_protected_xattr(xattr->name)) + evm_protected_xattrs = true; + } + + /* EVM xattr not needed. */ + if (!evm_protected_xattrs) + return -EOPNOTSUPP; evm_xattr = xattr; -- 2.25.1
Paul Moore
2023-Jan-12 17:15 UTC
[Ocfs2-devel] [PATCH v7 0/6] evm: Do HMAC of multiple per LSM xattrs for new inodes
On Thu, Dec 1, 2022 at 5:42 AM Roberto Sassu <roberto.sassu at huaweicloud.com> wrote:> > From: Roberto Sassu <roberto.sassu at huawei.com> > > One of the major goals of LSM stacking is to run multiple LSMs side by side > without interfering with each other. The ultimate decision will depend on > individual LSM decision. > > Several changes need to be made to the LSM infrastructure to be able to > support that. This patch set tackles one of them: gives to each LSM the > ability to specify one or multiple xattrs to be set at inode creation > time and, at the same time, gives to EVM the ability to access all those > xattrs and calculate the HMAC on them....> The patch set has been tested with both the SElinux and Smack test suites. > Below, there is the summary of the test results: > > SELinux Test Suite result (without patches): > Files=73, Tests=1346, 225 wallclock secs ( 0.43 usr 0.23 sys + 6.11 cusr 58.70 csys = 65.47 CPU) > Result: FAIL > Failed 4/73 test programs. 13/1346 subtests failed. > > SELinux Test Suite result (with patches): > Files=73, Tests=1346, 225 wallclock secs ( 0.44 usr 0.22 sys + 6.15 cusr 59.94 csys = 66.75 CPU) > Result: FAIL > Failed 4/73 test programs. 13/1346 subtests failed.Can you provide some more information on which of the selinux-testsuite tests failed? That shouldn't be happening and I'm a little concerned that these test failures, even if unrelated to your work here, could be masking failures which are related. -- paul-moore.com
Paul Moore
2023-Mar-08 22:16 UTC
[Ocfs2-devel] [PATCH v7 0/6] evm: Do HMAC of multiple per LSM xattrs for new inodes
On Thu, Dec 1, 2022 at 5:42?AM Roberto Sassu <roberto.sassu at huaweicloud.com> wrote:> > From: Roberto Sassu <roberto.sassu at huawei.com> > > One of the major goals of LSM stacking is to run multiple LSMs side by side > without interfering with each other. The ultimate decision will depend on > individual LSM decision. > > Several changes need to be made to the LSM infrastructure to be able to > support that. This patch set tackles one of them: gives to each LSM the > ability to specify one or multiple xattrs to be set at inode creation > time and, at the same time, gives to EVM the ability to access all those > xattrs and calculate the HMAC on them.Hi Roberto, The v7 draft of this patchset had some good discussion, and based on a quick read of the comments it looks like everyone was eventually satisfied that the v7 draft was good and no further changes were necessary, is that correct or do you have an updated draft of this patchset? -- paul-moore.com
Seemingly Similar Threads
- [PATCH v7 0/6] evm: Do HMAC of multiple per LSM xattrs for new inodes
- [PATCH v8 4/6] security: Allow all LSMs to provide xattrs for inode_init_security hook
- [PATCH v8 4/6] security: Allow all LSMs to provide xattrs for inode_init_security hook
- [PATCH v8 4/6] security: Allow all LSMs to provide xattrs for inode_init_security hook
- [PATCH v8 0/6] evm: Do HMAC of multiple per LSM xattrs for new inodes