Darrick J. Wong
2016-Dec-12 23:06 UTC
[Ocfs2-devel] [PATCH 5/7] reflink: make error reporting consistent
On Mon, Dec 12, 2016 at 06:47:43PM +0800, Eryu Guan wrote:> On Sun, Dec 11, 2016 at 01:53:16PM -0800, Darrick J. Wong wrote: > > When we're using dm-error to simulate failed devices, we don't really > > know if the write or the fdatasync is going to receive the EIO. So, > > capture the entire output and just look for the word error instead > > of enshrining it in the golden output. > > > > Signed-off-by: Darrick J. Wong <darrick.wong at oracle.com> > > --- > > tests/generic/265 | 6 +++++- > > tests/generic/265.out | 1 - > > tests/generic/266 | 5 ++++- > > tests/generic/266.out | 1 - > > tests/generic/267 | 2 +- > > tests/generic/268 | 5 ++++- > > tests/generic/268.out | 1 - > > tests/generic/271 | 5 +++-- > > tests/generic/271.out | 1 - > > tests/generic/272 | 5 +++-- > > tests/generic/272.out | 1 - > > tests/generic/276 | 2 +- > > tests/generic/276.out | 1 - > > tests/generic/278 | 5 +++-- > > tests/generic/278.out | 1 - > > tests/generic/279 | 4 ++-- > > tests/generic/279.out | 1 - > > tests/generic/281 | 4 ++-- > > tests/generic/281.out | 1 - > > tests/generic/283 | 6 ++++-- > > tests/generic/283.out | 1 - > > 21 files changed, 32 insertions(+), 27 deletions(-) > > > > > > diff --git a/tests/generic/265 b/tests/generic/265 > > index 8e9d5bc..ceddfbe 100755 > > --- a/tests/generic/265 > > +++ b/tests/generic/265 > > @@ -80,7 +80,11 @@ md5sum $testdir/file2 | _filter_scratch > > echo "CoW and unmount" > > sync > > _dmerror_load_error_table > > -$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" -c "fdatasync" $testdir/file2 >> $seqres.full > > +urk=$($XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" \ > > + -c "fdatasync" $testdir/file2 2>&1) > > +echo $urk >> $seqres.full > > +echo "$urk" | grep -q "error" || _fail "pwrite did not fail" > > + > > _dmerror_load_working_table > > _dmerror_unmount > > _dmerror_mount > > diff --git a/tests/generic/265.out b/tests/generic/265.out > > index 1b67114..31eb4e9 100644 > > --- a/tests/generic/265.out > > +++ b/tests/generic/265.out > > @@ -5,7 +5,6 @@ Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-265/file1 > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-265/file2 > > CoW and unmount > > -fdatasync: Input/output error > > Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-265/file1 > > Check for damage > > diff --git a/tests/generic/266 b/tests/generic/266 > > index 4f9816a..09541c8 100755 > > --- a/tests/generic/266 > > +++ b/tests/generic/266 > > @@ -80,7 +80,10 @@ md5sum $testdir/file2 | _filter_scratch > > echo "CoW and unmount" > > sync > > _dmerror_load_error_table > > -$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" -c "fdatasync" $testdir/file2 >> $seqres.full > > +urk=$($XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" \ > > + -c "fdatasync" $testdir/file2 2>&1) > > +echo $urk >> $seqres.full > > +echo "$urk" | grep -q "error" || _fail "pwrite did not fail" > > > > echo "Clean up the mess" > > _dmerror_unmount > > diff --git a/tests/generic/266.out b/tests/generic/266.out > > index dd34ad3..1641654 100644 > > --- a/tests/generic/266.out > > +++ b/tests/generic/266.out > > @@ -5,7 +5,6 @@ Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-266/file1 > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-266/file2 > > CoW and unmount > > -fdatasync: Input/output error > > Clean up the mess > > Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-266/file1 > > diff --git a/tests/generic/267 b/tests/generic/267 > > index e3a6b0c..2ec6ad9 100755 > > --- a/tests/generic/267 > > +++ b/tests/generic/267 > > @@ -80,7 +80,7 @@ md5sum $testdir/file2 | _filter_scratch > > echo "CoW and unmount" > > sync > > _dmerror_load_error_table > > -$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full > > +$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full 2>&1 > > _dmerror_load_working_table > > rm -rf $testdir/file2 >> $seqres.full 2>&1 > > _dmerror_unmount > > diff --git a/tests/generic/268 b/tests/generic/268 > > index c7dcd57..b7d16ab 100755 > > --- a/tests/generic/268 > > +++ b/tests/generic/268 > > @@ -81,7 +81,10 @@ md5sum $testdir/file2 | _filter_scratch > > echo "CoW and unmount" > > sync > > _dmerror_load_error_table > > -$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" -c "fdatasync" $testdir/file2 >> $seqres.full > > +urk=$($XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" \ > > + -c "fdatasync" $testdir/file2 2>&1) > > +echo $urk >> $seqres.full > > +echo "$urk" | grep -q "error" || _fail "pwrite did not fail" > > _dmerror_load_working_table > > > > echo "Rewrite" > > diff --git a/tests/generic/268.out b/tests/generic/268.out > > index 234e8be..1a3b39a 100644 > > --- a/tests/generic/268.out > > +++ b/tests/generic/268.out > > @@ -5,7 +5,6 @@ Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-268/file1 > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-268/file2 > > CoW and unmount > > -fdatasync: Input/output error > > Rewrite > > Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-268/file1 > > diff --git a/tests/generic/271 b/tests/generic/271 > > index ded8854..9439327 100755 > > --- a/tests/generic/271 > > +++ b/tests/generic/271 > > @@ -81,8 +81,9 @@ md5sum $testdir/file2 | _filter_scratch > > echo "CoW and unmount" > > sync > > _dmerror_load_error_table > > -$XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 \ > > - 2>&1 >> $seqres.full | _filter_xfs_io_error > > +urk=$($XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 2>&1) > > +echo $urk >> $seqres.full > > +echo "$urk" | grep -q "error" || _fail "dio pwrite did not fail" > > _dmerror_load_working_table > > _dmerror_unmount > > _dmerror_mount > > diff --git a/tests/generic/271.out b/tests/generic/271.out > > index 54d5b0d..9b44ee7 100644 > > --- a/tests/generic/271.out > > +++ b/tests/generic/271.out > > @@ -5,7 +5,6 @@ Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-271/file1 > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-271/file2 > > CoW and unmount > > -pwrite: Input/output error > > Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-271/file1 > > Check for damage > > diff --git a/tests/generic/272 b/tests/generic/272 > > index 5bc5b39..243adf5 100755 > > --- a/tests/generic/272 > > +++ b/tests/generic/272 > > @@ -81,8 +81,9 @@ md5sum $testdir/file2 | _filter_scratch > > echo "CoW and unmount" > > sync > > _dmerror_load_error_table > > -$XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 \ > > - 2>&1 >> $seqres.full | _filter_xfs_io_error > > +urk=$($XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 2>&1) > > +echo $urk >> $seqres.full > > +echo "$urk" | grep -q "error" || _fail "dio pwrite did not fail" > > > > echo "Clean up the mess" > > _dmerror_unmount > > diff --git a/tests/generic/272.out b/tests/generic/272.out > > index 0b8bdca..10ecda9 100644 > > --- a/tests/generic/272.out > > +++ b/tests/generic/272.out > > @@ -5,7 +5,6 @@ Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-272/file1 > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-272/file2 > > CoW and unmount > > -pwrite: Input/output error > > Clean up the mess > > Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-272/file1 > > diff --git a/tests/generic/276 b/tests/generic/276 > > index 83b902e..34b0029 100755 > > --- a/tests/generic/276 > > +++ b/tests/generic/276 > > @@ -82,7 +82,7 @@ echo "CoW and unmount" > > sync > > _dmerror_load_error_table > > $XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 \ > > - 2>&1 >> $seqres.full | _filter_xfs_io_error > > + >> $seqres.full 2>&1 > > This seems different, the error is ignored after this update and test > passes even if there's no error happened. Is this intentional? > > The same question applies to generic/279 and generic/281.Yes, it's intentional. Some of the tests g/{276,279,281} let the first write attempt fail and never retry, so it's sufficient to check the md5sum hasn't changed even after recovery. The others actually /do/ retry the write after removing the dm-error, so we have to check that something spat out an error message. Hmmm... that should go in the commit message next time around. --D> > Thanks, > Eryu > > > _dmerror_load_working_table > > rm -rf $testdir/file2 >> $seqres.full 2>&1 > > _dmerror_unmount > > diff --git a/tests/generic/276.out b/tests/generic/276.out > > index 88a0162..a080dd0 100644 > > --- a/tests/generic/276.out > > +++ b/tests/generic/276.out > > @@ -5,7 +5,6 @@ Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-276/file1 > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-276/file2 > > CoW and unmount > > -pwrite: Input/output error > > Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-276/file1 > > Check for damage > > diff --git a/tests/generic/278 b/tests/generic/278 > > index 415742a..d751f01 100755 > > --- a/tests/generic/278 > > +++ b/tests/generic/278 > > @@ -82,8 +82,9 @@ md5sum $testdir/file2 | _filter_scratch > > echo "CoW and unmount" > > sync > > _dmerror_load_error_table > > -$XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 \ > > - 2>&1 >> $seqres.full | _filter_xfs_io_error > > +urk=$($XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 2>&1) > > +echo $urk >> $seqres.full > > +echo "$urk" | grep -q "error" || _fail "dio pwrite did not fail" > > _dmerror_load_working_table > > > > echo "Rewrite" > > diff --git a/tests/generic/278.out b/tests/generic/278.out > > index 9ead4ac..cd22fcd 100644 > > --- a/tests/generic/278.out > > +++ b/tests/generic/278.out > > @@ -5,7 +5,6 @@ Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-278/file1 > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-278/file2 > > CoW and unmount > > -pwrite: Input/output error > > Rewrite > > Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-278/file1 > > diff --git a/tests/generic/279 b/tests/generic/279 > > index 2f1ec4f..4541de3 100755 > > --- a/tests/generic/279 > > +++ b/tests/generic/279 > > @@ -80,8 +80,8 @@ md5sum $testdir/file2 | _filter_scratch > > echo "CoW and unmount" > > sync > > _dmerror_load_error_table > > -urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" -c "msync -s 0 $filesize" $testdir/file2 > $TEST_DIR/mwrite.out 2>&1) > > -cat $TEST_DIR/mwrite.out | tee -a $seqres.full > > +$XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" \ > > + -c "msync -s 0 $filesize" $testdir/file2 >> $seqres.full 2>&1 > > _dmerror_load_working_table > > _dmerror_unmount > > _dmerror_mount > > diff --git a/tests/generic/279.out b/tests/generic/279.out > > index f34c2b2..009f05e 100644 > > --- a/tests/generic/279.out > > +++ b/tests/generic/279.out > > @@ -5,7 +5,6 @@ Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-279/file1 > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-279/file2 > > CoW and unmount > > -msync: Input/output error > > Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-279/file1 > > Check for damage > > diff --git a/tests/generic/281 b/tests/generic/281 > > index c95acf2..e8e1661 100755 > > --- a/tests/generic/281 > > +++ b/tests/generic/281 > > @@ -80,8 +80,8 @@ md5sum $testdir/file2 | _filter_scratch > > echo "CoW and unmount" > > sync > > _dmerror_load_error_table > > -urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" -c "msync -s 0 $filesize" $testdir/file2 > $TEST_DIR/mwrite.out 2>&1) > > -cat $TEST_DIR/mwrite.out | tee -a $seqres.full > > +$XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" \ > > + -c "msync -s 0 $filesize" $testdir/file2 >> $seqres.full 2>&1 > > > > echo "Clean up the mess" > > _dmerror_unmount > > diff --git a/tests/generic/281.out b/tests/generic/281.out > > index a2d8e3f..1bae187 100644 > > --- a/tests/generic/281.out > > +++ b/tests/generic/281.out > > @@ -5,7 +5,6 @@ Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-281/file1 > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-281/file2 > > CoW and unmount > > -msync: Input/output error > > Clean up the mess > > Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-281/file1 > > diff --git a/tests/generic/283 b/tests/generic/283 > > index 8d56ac3..7bfdb4d 100755 > > --- a/tests/generic/283 > > +++ b/tests/generic/283 > > @@ -81,8 +81,10 @@ md5sum $testdir/file2 | _filter_scratch > > echo "CoW and unmount" > > sync > > _dmerror_load_error_table > > -urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" -c "msync -s 0 $filesize" $testdir/file2 > $TEST_DIR/mwrite.out 2>&1) > > -cat $TEST_DIR/mwrite.out | tee -a $seqres.full > > +urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" \ > > + -c "msync -s 0 $filesize" $testdir/file2 2>&1) > > +echo $urk >> $seqres.full > > +echo "$urk" | grep -q "error" || _fail "mwrite did not fail" > > _dmerror_load_working_table > > > > echo "Rewrite" > > diff --git a/tests/generic/283.out b/tests/generic/283.out > > index f9fd5c8..b475054 100644 > > --- a/tests/generic/283.out > > +++ b/tests/generic/283.out > > @@ -5,7 +5,6 @@ Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-283/file1 > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-283/file2 > > CoW and unmount > > -msync: Input/output error > > Rewrite > > Compare files > > 1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-283/file1 > > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html