I downlod this:
https://github.com/networkupstools/nut
Code->Download ZIP.
15.05.2025 16:17, Jim Klimov:> Seems you did not build the PR source branch, usbhid-ups version there
> should be 0.64.
>
> Jim
>
> On Thu, May 15, 2025, 13:04 Alexey Korobeinikov <alexey at
fseafood.com>
> wrote:
>
> After reseting usb (usbreset 0d9f:0004), I can connect to UPS. But
> still have problem to shuting down the UPS:
>
> /usr/local/ups/bin/usbhid-ups -DDDD -a UPS -k
> Network UPS Tools 2.8.3.1 (development iteration after 2.8.3) -
> Generic HID driver 0.63
> USB communication driver (libusb 1.0) 0.50
> ??0.000000 ????[D1] upsdrv_makevartable...
> ??0.000078 ????[D1] Using USB implementation: libusb-1.0.26 (API:
> 0x01000109)
> ??0.000238 ????[D3] main_arg: var='driver'
val='usbhid-ups'
> ??0.000253 ????[D3] main_arg: var='vendorid' val='0d9f'
> ??0.000272 ????[D3] main_arg: var='productid'
val='0004'
> ??0.000289 ????[D3] main_arg: var='port' val='auto'
> ??0.000310 ????[D3] main_arg: var='pollinterval'
val='2'
> ...
> ? 0.004914 ????[D2] Checking device 4 of 10 (0D9F/0004)
> ??0.019235 ????[D2] - VendorID: 0d9f
> ??0.019276 ????[D2] - ProductID: 0004
> ??0.019282 ????[D2] - Manufacturer: POWERCOM Co.,LTD
> ??0.019288 ????[D2] - Product: HID UPS Battery
> ??0.019293 ????[D2] - Serial Number: 004-0D9F-000
> ??0.019298 ????[D2] - Bus: 006
> ??0.019303 ????[D2] - Bus Port: 002
> ??0.019308 ????[D2] - Device: 003
> ??0.019313 ????[D2] - Device release number: 0002
> ??0.019318 ????[D2] Trying to match device
> ??0.019327 ????[D2] match_function_subdriver (non-SHUT mode):
> matching a device...
> ??0.019347 ????[D3] match_function_regex: matching a device...
> ??0.019420 ????[D2] Device matches
> ??0.019438 ????[D2] Reading configuration descriptor 1 of 1
> ??0.019479 ????[D3] libusb_kernel_driver_active() returned 0: Success
> ??0.019516 ????[D2] Claimed interface 0 successfully
> ??0.019533 ????[D3] nut_libusb_set_altinterface: skipped
> libusb_set_interface_alt_setting(udev, 0, 0)
> ??0.021265 ????[D2] Retrieved HID descriptor (expected 9, got 9)
> ??0.021306 ????[D3] HID descriptor, method 1: (9 bytes) => 09 21
> 00 01 00 01 22 e4 03
> ??0.021314 ????[D3] HID descriptor length (method 1) 996
> ??0.021330 ????[D4] i=0, extra[i]=09, extra[i+1]=21
> ??0.021344 ????[D3] HID descriptor, method 2: (9 bytes) => 09 21
> 00 01 00 01 22 e4 03
> ??0.021369 ????[D3] HID descriptor length (method 2) 996
> ??0.021381 ????[D2] HID descriptor length 996
> ??0.062245 ????[D2] Report Descriptor size = 996
> ??0.062294 ????[D3] Report Descriptor: (996 bytes) => 05 84 09 04
> a1 01 09 24 a1 02 85 01 09 fe
> ??0.062308 ????[D3] ?79 01 75 08 95 01 15 00 26 ff 00 b1 22 85 02
> 09 ff 79 02 b1 22 05 85 85 05
> ??0.062322 ????[D3] ?09 89 79 04 b1 22 85 07 09 8b b1 22 85 08 09
> 2c 25 03 b1 22 85 09 09 83 25
> ??0.062335 ????[D3] ?64 b1 22 09 67 b1 22 85 0e 09 66 81 22 09 66
> b1 a2 85 0b 09 8c b1 22 85 0c
> ??0.062347 ????[D3] ?09 29 b1 a2 85 0d 09 85 75 10 27 ff ff 00 00
> b1 a2 85 37 09 68 81 22 09 68
> ??0.062363 ????[D3] ?b1 a2 05 84 85 0f 09 57 75 10 16 00 00 27 ff
> ff 00 00 b1 a2 85 10 09 56 75
> ??0.062380 ????[D3] ?20 16 00 00 27 9f 86 01 00 b1 a2 85 11 09 40
> 75 10 16 64 00 26 f0 00 b1 22
> ??0.062395 ????[D3] ?85 12 09 30 75 10 16 00 00 26 40 01 b1 a2 85
> 2c 09 36 75 08 25 5a b1 a2 85
> ??0.062410 ????[D3] ?13 09 5a 75 08 15 00 25 03 b1 a2 09 02 a1 02
> 05 85 85 0a 09 44 75 01 15 00
> ??0.062437 ????[D3] ?25 01 81 a2 09 44 b1 a2 09 45 81 a2 09 45 b1
> a2 09 d0 81 a2 09 d0 b1 a2 09
> ??0.062455 ????[D3] ?d1 81 a2 09 d1 b1 a2 09 42 81 a2 09 42 b1 a2
> 09 43 81 a2 09 43 b1 a2 09 4b
> ??0.062474 ????[D3] ?81 a2 09 4b b1 a2 09 db 81 a2 09 db b1 a2 05
> 84 09 68 81 a2 09 68 b1 a2 09
> ??0.062491 ????[D3] ?69 81 a2 09 69 b1 a2 09 73 81 a2 09 73 b1 a2
> 09 65 81 a2 09 65 b1 a2 95 03
> ??0.062510 ????[D3] ?81 01 b1 01 95 01 06 86 ff 09 80 81 a2 09 80
> b1 a2 c0 c0 05 84 09 12 a1 00
> ??0.062526 ????[D3] ?85 15 09 58 75 08 25 66 b1 a2 85 16 09 70 75
> 08 25 03 b1 a2 05 85 85 17 09
> ??0.062544 ????[D3] ?85 75 10 27 ff ff 00 00 b1 a2 85 18 09 66 75
> 08 15 00 25 64 b1 a2 05 84 85
> ??0.062559 ????[D3] ?19 09 40 75 10 16 00 0c 26 00 30 b1 22 85 1a
> 09 30 75 10 16 00 09 26 00 24
> ??0.062577 ????[D3] ?b1 a2 85 1b 09 56 75 20 16 00 00 27 9f 86 01
> 00 b1 a2 85 2d 09 36 75 08 25
> ??0.062594 ????[D3] ?5a b1 a2 c0 05 84 09 1a a1 00 85 1c 09 40 75
> 10 16 64 00 26 f0 00 b1 22 85
> ??0.062612 ????[D3] ?1d 09 30 75 10 16 00 00 26 40 01 b1 a2 85 2e
> 09 30 75 10 16 00 00 26 40 01
> ??0.062627 ????[D3] ?b1 a2 85 1e 09 32 75 08 15 00 25 46 b1 a2 c0
> 05 84 09 1c a1 00 85 2f 09 41
> ??0.062645 ????[D3] ?75 08 15 01 25 0c b1 22 85 1f 09 35 75 08 15
> 00 25 64 b1 a2 85 20 09 40 75
> ??0.062664 ????[D3] ?10 16 64 00 26 f0 00 b1 22 85 21 09 30 75 10
> 16 00 00 26 40 01 b1 a2 85 30
> ??0.062681 ????[D3] ?09 42 75 08 15 32 25 3c b1 22 85 22 09 32 75
> 08 15 00 25 46 b1 a2 85 23 09
> ??0.062699 ????[D3] ?57 75 08 15 00 25 12 b1 a2 85 24 09 56 75 20
> 16 00 00 27 9f 86 01 00 b1 a2
> ??0.062716 ????[D3] ?c0 05 84 85 06 09 01 79 05 b1 a2 85 25 09 5a
> 75 08 15 00 25 03 b1 a2 09 02
> ??0.062736 ????[D3] ?a1 02 05 85 85 26 09 44 75 01 15 00 25 01 b1
> a2 09 45 b1 a2 09 d0 b1 a2 09
> ??0.062752 ????[D3] ?d1 b1 a2 09 42 b1 a2 09 43 b1 a2 09 4b b1 a2
> 09 db b1 a2 05 84 09 68 b1 a2
> ??0.062768 ????[D3] ?09 69 b1 a2 09 73 b1 a2 09 65 b1 a2 09 6e b1
> a2 09 6f b1 a2 09 71 b1 a2 06
> ??0.062791 ????[D3] ?86 ff 09 80 b1 a2 c0 85 27 05 84 09 69 75 08
> 15 00 25 01 b1 a2 09 1e a1 00
> ??0.062807 ????[D3] ?85 a0 09 01 75 08 95 07 15 00 26 ff 00 b1 03
> 85 a1 09 01 75 08 95 07 15 00
> ??0.062835 ????[D3] ?26 ff 00 b1 03 85 a2 09 01 75 08 95 07 15 00
> 26 ff 00 b1 03 85 a3 09 01 75
> ??0.062853 ????[D3] ?08 95 07 15 00 26 ff 00 b1 03 85 a4 09 01 75
> 08 95 07 15 00 26 ff 00 b1 03
> ??0.062871 ????[D3] ?85 a5 09 01 75 08 95 07 15 00 26 ff 00 b1 03
> 85 a6 09 01 75 08 95 07 15 00
> ??0.062889 ????[D3] ?26 ff 00 b1 03 85 a7 09 01 75 08 95 07 15 00
> 26 ff 00 b1 03 85 a8 09 01 75
> ??0.062905 ????[D3] ?08 95 07 15 00 26 ff 00 b1 03 85 a9 09 01 75
> 08 95 07 15 00 26 ff 00 b1 03
> ??0.062923 ????[D3] ?85 aa 09 01 75 08 95 07 15 00 26 ff 00 b1 03
> 85 ab 09 01 75 08 95 07 15 00
> ??0.062940 ????[D3] ?26 ff 00 b1 03 85 ac 09 01 75 08 95 07 15 00
> 26 ff 00 b1 03 85 ad 09 01 75
> ??0.062960 ????[D3] ?08 95 07 15 00 26 ff 00 b1 03 85 ae 09 01 75
> 08 95 07 15 00 26 ff 00 b1 03
> ??0.062977 ????[D3] ?85 31 09 01 75 08 95 01 15 00 26 ff 00 b1 03
> 85 32 09 01 75 08 95 01 15 00
> ??0.062990 ????[D3] ?26 ff 00 b1 03 c0 c0
> ??0.063197 ????Using subdriver: PowerCOM HID 0.71
> ??0.063214 ????[D1] 102 HID objects found
> ??0.063229 ????[D4] Entering libusb_get_report
> ??0.064157 ????[D3] Report[get]: (2 bytes) => 01 01
> ??0.064197 ????[D1] Path: UPS.PowerSummary.iProduct, Type:
> Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 1
> ??0.064209 ????[D4] Entering libusb_get_report
> ??0.066271 ????[D3] Report[get]: (2 bytes) => 02 02
> ??0.066311 ????[D1] Path: UPS.PowerSummary.iSerialNumber, Type:
> Feature, ReportID: 0x02, Offset: 0, Size: 8, Value: 2
> ??0.066320 ????[D4] Entering libusb_get_report
> ...
> ? 0.186774 ????[D4] Entering libusb_get_report
> ??0.188120 ????nut_libusb_get_report: Success
> ??0.188164 ????[D1] Can't retrieve Report 2d: Success
> ??0.188182 ????[D4] string_to_path: depth = 3
> ??0.188197 ????[D4] HIDGetItemData: FindObject_with_Path() failed
> to locate 'PowercomUPS.PowercomBatterySystem.PowercomVoltage'
> ??0.188210 ????[D4] string_to_path: depth = 4
> ...
> ? 0.188755 ????Initiating UPS [UPS] shutdown
> ??0.188770 ????[D1] loop_shutdown_commands: call
> do_loop_shutdown_commands() with driver-default sdcommands
> ??0.188780 ????[D1] Starting
> do_loop_shutdown_commands(shutdown.default), call depth 1...
> ??0.188791 ????[D1] upsdrv_shutdown...
> ??0.188802 ????[D1] Starting
>
do_loop_shutdown_commands(shutdown.return,shutdown.reboot,load.off.delay,shutdown.stayoff),
> call depth 2...
> ??0.188813 ????[D1] instcmd(shutdown.return, [NULL])
> ??0.188822 ????[D3] instcmd: using Path
> 'UPS.PowerSummary.DelayBeforeShutdown'
> ??0.188833 ????[D2] instcmd: shutdown.return requires an explicit
> parameter
>
> ??0.188842 ????[D1] instcmd(shutdown.reboot, [NULL])
> ??0.188856 ????[D2] find_nut_info: unknown info type: shutdown.reboot
> ??0.188866 ????[D3] instcmd: cmdname 'shutdown.reboot' not
found;
> checking for alternatives
> ??0.188879 ????[D2] instcmd: info element unavailable shutdown.reboot
>
> ??0.188890 ????[D1] instcmd(load.off.delay, [NULL])
> ??0.188902 ????[D2] find_nut_info: unknown info type: load.off.delay
> ??0.188911 ????[D3] instcmd: cmdname 'load.off.delay' not
found;
> checking for alternatives
> ??0.188921 ????[D2] instcmd: info element unavailable load.off.delay
>
> ??0.188935 ????[D1] instcmd(shutdown.stayoff, [NULL])
> ??0.188945 ????[D3] instcmd: using Path
> 'UPS.PowerSummary.DelayBeforeShutdown'
> ??0.188956 ????[D2] instcmd: shutdown.stayoff requires an explicit
> parameter
>
> ??0.188966 ????[D1] Ending
>
do_loop_shutdown_commands(shutdown.return,shutdown.reboot,load.off.delay,shutdown.stayoff),
> call depth 2: return-code 2
> ??0.188974 ????Shutdown failed!
> ??0.188986 ????[D1] set_exit_flag: raising exit flag due to signal -1
> ??0.188996 ????[D1] do_loop_shutdown_commands(): command
> 'shutdown.default' was handled successfully
> ??0.189005 ????[D1] Ending
> do_loop_shutdown_commands(shutdown.default), call depth 1:
> return-code 0
> ??0.189014 ????UPS [UPS]: shutdown request was successful with
> 'shutdown.default'
> ??0.189022 ????[D1] set_exit_flag: raising exit flag due to
> programmatic abort: EXIT_FAILURE
> ??0.189040 ????[D1] upsdrv_cleanup...
> ??0.189311 ????[D1] upsnotify: failed to notify about state
> NOTIFY_STATE_STOPPING: no notification tech defined, will not spam
> more about it
> ??0.189331 ????[D1] On systems without service units, consider
> `export NUT_QUIET_INIT_UPSNOTIFY=true`
>
> The UPS didn't? shut down, just still BEEP because on battery (
>3
> min wait )...
>
> 13.05.2025 18:31, Jim Klimov:
>> Check https://github.com/networkupstools/nut/pull/2955 please.
>>
>> Jim
>>
>> On Mon, May 12, 2025 at 12:04?PM Jim Klimov
>> <jimklimov+nut at gmail.com <mailto:jimklimov%2Bnut at
gmail.com>> wrote:
>>
>> Hoped to look into this just today, if nobody beat me to it
yet.
>>
>> Jim
>>
>> On Mon, May 12, 2025 at 11:54?AM Alexey Korobeinikov
>> <alexey at fseafood.com> wrote:
>>
>> Are there any chances that this error can be fixed?
>>
>> 06.05.2025 18:19, Alexey Korobeinikov:
>>> Hi! Thank You!
>>>
>>> The UPS behavior are chages with NUT v.2.8.2 but more
>>> strange
>>>
>>> After this command (if power cord unpluged)
>>> /usr/local/ups/bin/usbhid-ups -DDDD -a UPS -k
>>>
>>> ....
>>> 0.188173???? [D4] string_to_path: depth = 3
>>> ?? 0.188187???? [D4] string_to_path: depth = 3
>>> ?? 0.188199???? [D4] string_to_path: depth = 3
>>> ?? 0.188211???? [D4] string_to_path: depth = 3
>>> ?? 0.188246???? [D2] find_nut_info: unknown info type:
>>> load.off.delay
>>> ?? 0.188267???? [D2] find_nut_info: unknown info type:
>>> load.off.delay
>>> ?? 0.188280???? Initiating UPS shutdown
>>> ?? 0.188290???? [D1] upsdrv_shutdown...
>>> ?? 0.188298???? [D1] instcmd(shutdown.return, [NULL])
>>> ?? 0.188316???? [D3] instcmd: using Path
>>> 'UPS.PowerSummary.DelayBeforeShutdown'
>>> ?? 0.188332???? [D3] powercom_shutdown_nuf: value
>>> (null), command = 5E00
>>> ?? 0.224970???? [D3] Report[set]: (3 bytes) => 0f 00
5e
>>> ?? 0.225003???? [D4] Set report succeeded
>>> ?? 0.225012???? [D3] instcmd: SUCCEED
>>>
>>> The UPS are start double beeping every 2 seconds, but
>>> didn't turn off himself ( 2 minutes wait )
>>> UPS are still beeping if power are restored
>>>
>>> Status are:
>>> # upsc ups at localhost
>>> battery.charge: 100
>>> battery.charge.low: 70
>>> battery.charge.warning: 30
>>> battery.mfr.date: 2014/01/15
>>> battery.runtime: 800
>>> battery.type: PbAc
>>> device.mfr: POWERCOM Co.,LTD
>>> device.model: HID UPS Battery
>>> device.serial: 004-0D9F-000
>>> device.type: ups
>>> driver.debug: 0
>>> driver.flag.allow_killpower: 0
>>> driver.flag.ignorelb: enabled
>>> driver.name <http://driver.name>: usbhid-ups
>>> driver.parameter.offdelay: 30
>>> driver.parameter.ondelay: 60
>>> driver.parameter.override.battery.charge.low: 70
>>> driver.parameter.pollfreq: 30
>>> driver.parameter.pollinterval: 2
>>> driver.parameter.port: auto
>>> driver.parameter.productid: 0004
>>> driver.parameter.synchronous: auto
>>> driver.parameter.vendorid: 0d9f
>>> driver.state: quiet
>>> driver.version: 2.8.2
>>> driver.version.data: PowerCOM HID 0.7
>>> driver.version.internal: 0.53
>>> driver.version.usb: libusb-1.0.26 (API: 0x1000109)
>>> input.frequency: 50.0
>>> input.voltage: 224.0
>>> input.voltage.nominal: 220
>>> output.frequency: 50.0
>>> output.voltage: 224.0
>>> output.voltage.nominal: 220
>>> ups.beeper.status: enabled
>>> ups.date: 2014/01/15
>>> ups.delay.shutdown: 30
>>> ups.delay.start: 60
>>> ups.load: 1
>>> ups.mfr: POWERCOM Co.,LTD
>>> ups.model: HID UPS Battery
>>> ups.productid: 0004
>>> ups.serial: 004-0D9F-000
>>> ups.status: OL
>>> ups.test.result: Done and passed
>>> ups.timer.shutdown: 269
>>> ups.timer.start: 0
>>> ups.vendorid: 0d9f
>>> root at vTEMPLATE8:/var/log# upsc ups at localhost
>>> battery.charge: 100
>>> battery.charge.low: 70
>>> battery.charge.warning: 30
>>> battery.mfr.date: 2014/01/15
>>> battery.runtime: 800
>>> battery.type: PbAc
>>> device.mfr: POWERCOM Co.,LTD
>>> device.model: HID UPS Battery
>>> device.serial: 004-0D9F-000
>>> device.type: ups
>>> driver.debug: 0
>>> driver.flag.allow_killpower: 0
>>> driver.flag.ignorelb: enabled
>>> driver.name <http://driver.name>: usbhid-ups
>>> driver.parameter.offdelay: 30
>>> driver.parameter.ondelay: 60
>>> driver.parameter.override.battery.charge.low: 70
>>> driver.parameter.pollfreq: 30
>>> driver.parameter.pollinterval: 2
>>> driver.parameter.port: auto
>>> driver.parameter.productid: 0004
>>> driver.parameter.synchronous: auto
>>> driver.parameter.vendorid: 0d9f
>>> driver.state: quiet
>>> driver.version: 2.8.2
>>> driver.version.data: PowerCOM HID 0.7
>>> driver.version.internal: 0.53
>>> driver.version.usb: libusb-1.0.26 (API: 0x1000109)
>>> input.frequency: 50.0
>>> input.voltage: 224.0
>>> input.voltage.nominal: 220
>>> output.frequency: 50.0
>>> output.voltage: 224.0
>>> output.voltage.nominal: 220
>>> ups.beeper.status: enabled
>>> ups.date: 2014/01/15
>>> ups.delay.shutdown: 30
>>> ups.delay.start: 60
>>> ups.load: 1
>>> ups.mfr: POWERCOM Co.,LTD
>>> ups.model: HID UPS Battery
>>> ups.productid: 0004
>>> ups.serial: 004-0D9F-000
>>> ups.status: OL
>>> ups.test.result: Done and passed
>>> ups.timer.shutdown: 89
>>> ups.timer.start: 0
>>> ups.vendorid: 0d9f
>>> root at vTEMPLATE8:/var/log# upsc ups at localhost
>>> battery.charge: 100
>>> battery.charge.low: 70
>>> battery.charge.warning: 30
>>> battery.mfr.date: 2014/01/15
>>> battery.runtime: 800
>>> battery.type: PbAc
>>> device.mfr: POWERCOM Co.,LTD
>>> device.model: HID UPS Battery
>>> device.serial: 004-0D9F-000
>>> device.type: ups
>>> driver.debug: 0
>>> driver.flag.allow_killpower: 0
>>> driver.flag.ignorelb: enabled
>>> driver.name <http://driver.name>: usbhid-ups
>>> driver.parameter.offdelay: 30
>>> driver.parameter.ondelay: 60
>>> driver.parameter.override.battery.charge.low: 70
>>> driver.parameter.pollfreq: 30
>>> driver.parameter.pollinterval: 2
>>> driver.parameter.port: auto
>>> driver.parameter.productid: 0004
>>> driver.parameter.synchronous: auto
>>> driver.parameter.vendorid: 0d9f
>>> driver.state: quiet
>>> driver.version: 2.8.2
>>> driver.version.data: PowerCOM HID 0.7
>>> driver.version.internal: 0.53
>>> driver.version.usb: libusb-1.0.26 (API: 0x1000109)
>>> input.frequency: 50.0
>>> input.voltage: 226.0
>>> input.voltage.nominal: 220
>>> output.frequency: 50.0
>>> output.voltage: 226.0
>>> output.voltage.nominal: 220
>>> ups.beeper.status: enabled
>>> ups.date: 2014/01/15
>>> ups.delay.shutdown: 30
>>> ups.delay.start: 60
>>> ups.load: 1
>>> ups.mfr: POWERCOM Co.,LTD
>>> ups.model: HID UPS Battery
>>> ups.productid: 0004
>>> ups.serial: 004-0D9F-000
>>> ups.status: OL
>>> ups.test.result: Done and passed
>>> ups.timer.shutdown: 3148
>>> ups.timer.start: 0
>>> ups.vendorid: 0d9f
>>>
>>> And strange with timer parametr that are changes
cycling:
>>> ups.timer.shutdown: 3570
>>> ups.timer.shutdown: 2430
>>> ups.timer.shutdown: 1710
>>> ...
>>> ups.timer.shutdown: 870
>>> ups.timer.shutdown: 3629
>>> ups.timer.shutdown: 2729
>>> ups.timer.shutdown: 1829
>>> ...
>>> ups.timer.shutdown: 89
>>> ups.timer.shutdown: 3148
>>> ...
>>>
>>> the ups.conf are:
>>> [UPS]
>>> ??? driver = usbhid-ups
>>> ??? vendorid = 0d9f
>>> ??? productid = 0004
>>> #??? powercom_sdcmd_byte_order_fallback
>>> ??? port = auto
>>> #??? pollonly = enabled
>>> ??? pollinterval = 2
>>> ??? pollfreq = 30
>>> ??? offdelay = 30
>>> ??? ondelay = 60
>>> ??? allow_killpower
>>> ??? ignorelb
>>> ??? override.battery.charge.low = 70
>>> #??? override.battery.runtime.low = 600
>>>
>>> 06.05.2025 01:49, Jim Klimov:
>>>> At least the "shutdown.return requires a
parameter"
>>>> part *may* be a regression of the new
"sdcommands"
>>>> change in v2.8.3,though I don't think older
code passed
>>>> any. Maybe something got lost in mass-edit changes
though.
>>>>
>>>> Can you please double-check with 2.8.2 if its older
>>>> approach to UPS shutdown behaved better?
>>>>
>>>> Jim Klimov
>>>>
>>>> On Tue, May 6, 2025, 00:41 Alexey Korobeinikov
>>>> <alexey at fseafood.com> wrote:
>>>>
>>>> Hi, my UPS Model Powercom BNT400AP ( made
2017.12 )
>>>> on Linux Devuan
>>>> Daedalus and NUT v2.8.3 (install from source
>>>> tarball with "configure
>>>> --with-usb --with-user=nut --with-group=nut
>>>> --with-libusb=1.0
>>>> --with-statepath=/run/nut
--with-pidpath=/run/nut"
>>>> options) didn't
>>>> shutdown itself after OS is shuting down by
signal
>>>> of UPS battary is low.
>>>>
>>>> ...
>>>>
>>>> ???0.184242 ????Initiating UPS [UPS] shutdown
>>>> ???0.184257 ????[D1] loop_shutdown_commands:
call
>>>> do_loop_shutdown_commands() with driver-default
>>>> sdcommands
>>>> ???0.184267 ????[D1] Starting
>>>> do_loop_shutdown_commands(shudown.default),
call
>>>> depth 1...
>>>> ???0.184280 ????[D1] upsdrv_shutdown...
>>>> ???0.184289 ????[D1] Starting
>>>>
do_loop_shutdown_commands(shutdown.return,shutdown.reboot,load.off.delay,shutdown.stayoff),
>>>>
>>>> call depth 2...
>>>> ???0.184299 ????[D1] instcmd(shutdown.return,
[NULL])
>>>> ???0.184313 ????[D3] instcmd: using Path
>>>> 'UPS.PowerSummary.DelayBeforehutdown'
>>>> ???0.184321 ????[D2] instcmd: shutdown.return
>>>> requires an explicit
>>>> parameter
>>>>
>>>> ???0.184331 ????[D1] instcmd(shutdown.reboot,
[NULL])
>>>> ???0.184348 ????[D2] find_nut_info: unknown
info
>>>> type: shutdown.reboot
>>>> ???0.184358 ????[D3] instcmd: cmdname
>>>> 'shutdown.reboot' not found;
>>>> checking for alternatives
>>>> ???0.184371 ????[D2] instcmd: info element
>>>> unavailable shutdown.reboot
>>>>
>>>> ???0.184387 ????[D1] instcmd(load.off.delay,
[NULL])
>>>> ???0.184398 ????[D2] find_nut_info: unknown
info
>>>> type: load.off.delay
>>>> ???0.184407 ????[D3] instcmd: cmdname
>>>> 'load.off.delay' not found;
>>>> checking for alternatives
>>>> ???0.184418 ????[D2] instcmd: info element
>>>> unavailable load.off.delay
>>>>
>>>> ???0.184428 ????[D1] instcmd(shutdown.stayoff,
[NULL])
>>>> ???0.184438 ????[D3] instcmd: using Path
>>>> 'UPS.PowerSummary.DelayBeforehutdown'
>>>> ???0.184449 ????[D2] instcmd: shutdown.stayoff
>>>> requires an explicit
>>>> parameter
>>>>
>>>> ???0.184462 ????[D1] Ending
>>>>
do_loop_shutdown_commands(shutdown.return,shutdown.reboot,load.off.delay,shutdown.stayoff),
>>>>
>>>> call
>>>> depth 2: return-code 2
>>>> ???0.184471 ????Shutdown failed!
>>>> ???0.184483 ????[D1] set_exit_flag: raising
exit
>>>> flag due to signal -1
>>>> ???0.184493 ????[D1]
do_loop_shutdown_commands():
>>>> command
>>>> 'shutdown.default' was handled
successfully
>>>> ???0.184502 ????[D1] Ending
>>>> do_loop_shutdown_commands(shutdown.default),
>>>> call depth 1: return-code 0
>>>> ???0.184512 ????UPS [UPS]: shutdown request was
>>>> successful with
>>>> 'shutdown.default'
>>>> ???0.184523 ????[D1] set_exit_flag: raising
exit
>>>> flag due to
>>>> programmatic abort: EXIT_FAILURE
>>>> ???0.184540 ????[D1] upsdrv_cleanup...
>>>> ???0.184899 ????[D1] upsnotify: failed to
notify
>>>> about state
>>>> NOTIFY_STATE_STOPPING: no notification tech
>>>> defined, will not spam more about it
>>>> ???0.184936 ????[D1] On systems without service
>>>> units, consider `export
>>>> NUT_QUIET_INIT_UPSNOTIFY=true`
>>>>
>>>> I try to use
"powercom_sdcmd_byte_order_fallback"
>>>> option, with same effect.
>>>>
>>>> Wat's wrong with my UPS/NUT ?
>>>> Thank You!
>>>>
>>>> --
>>>> Oleksii Korobeinikov
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Nut-upsuser mailing list
>>>> Nut-upsuser at alioth-lists.debian.net
>>>>
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>>>>
>>>
>>> --
>>> ? ???????
>>> ???????????? ???????
>>> ????????? ?????????????
>>>
>>> ??? "??????? ?????"
>>> ???. ?????????? 152
<https://www.google.com/maps/search/%D0%B2%D1%83%D0%BB.+%D0%91%D1%80%D0%BE%D0%B2%D0%B0%D1%80%D1%81%D1%8C%D0%BA%D0%B0+152?entry=gmail&source=g>,
??? ?????? ???????
>>> ???????? ???????, 07442
>>> ?.+38 044 495-88-00
>>> ??.6101
>>> ?.+38 067 994-40-48
>>>
>>> _______________________________________________
>>> Nut-upsuser mailing list
>>> Nut-upsuser at alioth-lists.debian.net
>>>
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>>
>> --
>> ? ???????
>> ???????????? ???????
>> ????????? ?????????????
>>
>> ??? "??????? ?????"
>> ???. ?????????? 152
<https://www.google.com/maps/search/%D0%B2%D1%83%D0%BB.+%D0%91%D1%80%D0%BE%D0%B2%D0%B0%D1%80%D1%81%D1%8C%D0%BA%D0%B0+152?entry=gmail&source=g>,
??? ?????? ???????
>> ???????? ???????, 07442
>> ?.+38 044 495-88-00
>> ??.6101
>> ?.+38 067 994-40-48
>>
>
> --
> ? ???????
> ???????????? ???????
> ????????? ?????????????
>
> ??? "??????? ?????"
> ???. ?????????? 152
<https://www.google.com/maps/search/%D0%B2%D1%83%D0%BB.+%D0%91%D1%80%D0%BE%D0%B2%D0%B0%D1%80%D1%81%D1%8C%D0%BA%D0%B0+152?entry=gmail&source=g>,
??? ?????? ???????
> ???????? ???????, 07442
> ?.+38 044 495-88-00
> ??.6101
> ?.+38 067 994-40-48
>
--
? ???????
???????????? ???????
????????? ?????????????
??? "??????? ?????"
???. ?????????? 152, ??? ?????? ???????
???????? ???????, 07442
?.+38 044 495-88-00
??.6101
?.+38 067 994-40-48
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20250515/89e824b6/attachment-0001.htm>