I don't think they have variables attached (maybe some for known verdicts
after a test). The tests and other available ops should be among `upscmd
-l`.
Jim
On Mon, Sep 4, 2023, 11:12 ?ukasz Michalski via Nut-upsuser <
nut-upsuser at alioth-lists.debian.net> wrote:
> Hi,
>
> I have Eaton 3S 700 connected and configure using nut-2.8.0 under
> ArchLinux. OL, OB reporting works OK, but I am not able to enable battery
> testing. Variables ups.test.* are not reported by upsc:
>
> [root at black ~]# upsc eaton at 192.168.20.2 |grep ups.*
> device.type: ups
> driver.name: usbhid-ups
> ups.beeper.status: enabled
> ups.delay.shutdown: 360
> ups.delay.start: 120
> ups.firmware: 02
> ups.load: 5
> ups.mfr: EATON
> ups.model: Eaton 3S 700
> ups.power.nominal: 700
> ups.productid: ffff
> ups.realpower: 28
> ups.serial: 000000000
> ups.status: OL
> ups.timer.shutdown: -1
> ups.timer.start: -1
> ups.vendorid: 0463
>
>
> Recently I had to replace battery and when using official Eaton UPS
> Companion 2.1 under windows7, I see "battery testing" option and
I can
> choose battery test period (every day, every week, etc).
>
> Is there any way I can enable battery testing with nut for this model?
>
> Thanks,
> ?ukasz
>
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20230904/bba8b64f/attachment.htm>