Nut upsuser - Oct 2022 - APC SmartUPS powercycles when power returns

Andrea Venturoli via Nut-upsuser <nut-upsuser at alioth-lists.debian.net>
writes:
> I've got an APC SmartUPS 1500: it's connected via USB and I'm
using
> the usbhid-ups driver. This used to work properly until recently.
>
> Now, when power goes out it keeps on going on battery potentially for
> several minutes, but, the moment line returns, I hear a click and
> power is cycled on the outlets (so every computer is rebooted
> forcily).
>
> I'm thinking about a hardware issue, but could it be that NUT is
> instructing it to do so?
I suggest an experiment:

  disconnect the USB cable to the NUT computer

  turn off power for 5 minutes

  turn power back on

and see what happens
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 194 bytes
Desc: not available
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20221011/130493d4/attachment.sig>

On 10/11/22 15:17, Greg Troxel wrote:
> I suggest an experiment:
> 
>    disconnect the USB cable to the NUT computer
> 
>    turn off power for 5 minutes
> 
>    turn power back on
> 
> and see what happens
Thanks.
This is planned, but I can't be at this site before some weeks.

  bye
	av.