Nut upsuser - Jun 2021 - [EXTERNAL] Couple questions about the output of upsc command

I have pfsense set up as a master with nut 2.7.4_8, controlling a Tripplite
Smartonline SU1500RTXLCD2U with SNMPWEBCARDLX, using the snmp driver.

1. upsc does not return battery.runtime.low or battery.charge.low. Does my
UPS simply not support these variables, or could I fix it with a
configuration change?

2. battery.runtime does not change with load, either when online or on
battery power. Is this supposed to happen? If not, can it be fixed?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20210608/bb619fcb/attachment.htm>

Re 2:
What's the load (in watts or percent) and what is the runtime value in
minutes? Is the minutes remaining value changing on the UPS LCD or in the
WEBCARDLX GUI when on battery?

More generally, if no one else chimes in with an answer, I can set up some tests
when I'm in the office to compare.

- David Zomaya
Tripp Lite
________________________________
From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=tripplite.com at
alioth-lists.debian.net> on behalf of Nathan Dehnel via Nut-upsuser
<nut-upsuser at alioth-lists.debian.net>
Sent: Tuesday, June 8, 2021 11:15:19 PM
To: nut-upsuser at alioth-lists.debian.net
Subject: [EXTERNAL] [Nut-upsuser] Couple questions about the output of upsc
command

This is an EXTERNAL email. Please take a moment and think before clicking any
links or opening any attachments from this email. If suspicious, please forward
to ishelpdesk at tripplite.com for review.
________________________________
I have pfsense set up as a master with nut 2.7.4_8, controlling a Tripplite
Smartonline SU1500RTXLCD2U with SNMPWEBCARDLX, using the snmp driver.

1. upsc does not return battery.runtime.low or battery.charge.low. Does my UPS
simply not support these variables, or could I fix it with a configuration
change?

2. battery.runtime does not change with load, either when online or on battery
power. Is this supposed to happen? If not, can it be fixed?
________________________________
This message is for the addressee's use only. It may contain confidential
information. If you receive this message in error, please delete it and notify
the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no
responsibility for viruses which may infect an email sent to you from Tripp Lite
and which damage your electronic systems or information. It is your
responsibility to maintain virus detection systems to prevent damage to your
electronic systems and information.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20210610/65d06e34/attachment.htm>