Thanks Jim. Attached are my notes from compiling on the Raspberry PI. I
am having some permission issues but I think it is working enough that I
see the similar results with the latest master.
On Mon, Feb 22, 2021 at 7:22 AM Matthew Rivett <mrivett at gmail.com>
wrote:
> Thanks Jim. I will attempt to do the build and see if that works.
I'll
> respond back with my results. It might take awhile; I don't have much
> experience compiling code but I"ll figure it out.
>
> On Mon, Feb 22, 2021 at 6:36 AM Jim Klimov <jimklimov at gmail.com>
wrote:
>
>> At this time, a newer version than pre-packaged would be a build from
>> master branch on github. We are still tying up some loose ends to cut a
>> nect official release.
>>
>> Jim
>>
>> On Fri, Feb 19, 2021, 05:06 Matthew Rivett via Nut-upsuser <
>> nut-upsuser at alioth-lists.debian.net> wrote:
>>
>>> Hello,
>>>
>>> I am trying to connect to my Liebert GXT4 UPS using NUT. I have
been
>>> able to connect by using information from the following post.
>>>
>>>
>>>
https://alioth-lists.debian.net/pipermail/nut-upsuser/2017-June/010682.html
>>>
>>> I am running on a Raspberry PI 3 Model B Rev 1.2
>>> pi at vpn01alp:~ $ cat /etc/os-release
>>> PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
>>> NAME="Raspbian GNU/Linux"
>>> VERSION_ID="9"
>>> VERSION="9 (stretch)"
>>> VERSION_CODENAME=stretch
>>> ID=raspbian
>>> ID_LIKE=debian
>>> HOME_URL="http://www.raspbian.org/"
>>> SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
>>> BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
>>>
>>> I installed using
>>> apt-get install nut nut-server nut-client
>>>
>>> My configuration is as follows
>>> pi at vpn01alp:~ $ tail /etc/nut/ups.conf
>>> # the -h option and/or read the driver's documentation.
>>>
>>> # Set maxretry to 3 by default, this should mitigate race with slow
>>> devices:
>>> maxretry = 3
>>>
>>> [Liebert]
>>> productid=0000
>>> driver = usbhid-ups
>>> port = auto
>>> desc = "Liebert"
>>>
>>> I also added the following to
/lib/udev/rules.d/62-nut-usbups.rules
>>> # Liebert GXT4 - usbhid-ups
>>> ATTR{idVendor}=="10af",
ATTR{idProduct}=="0004", MODE="664", GROUP="nut"
>>>
>>> That didn't work so I changed permissions using the following
>>> pi at vpn01alp:~ $ lsusb
>>> Bus 001 Device 004: ID 10af:0000 Liebert Corp. UPS
>>> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
>>> SMSC9512/9514 Fast Ethernet Adapter
>>> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
SMC9514 Hub
>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>> pi at vpn01alp:~ $ sudo chmod 0666 /dev/bus/usb/001/004
>>>
>>> Now I can see the following information. It doesn't appear to
be
>>> complete or accurate.
>>> pi at vpn01alp:~ $ upsc Liebert
>>> Init SSL without certificate database
>>> battery.charge: 100
>>> battery.charge.low: 20
>>> battery.charge.warning: 0
>>> battery.type: PbAc
>>> battery.voltage: 0.0
>>> battery.voltage.nominal: 0.0
>>> device.mfr: Emerson Network Power
>>> device.model: Liebert GXT4
>>> device.serial: 1718700042AFB93
>>> device.type: ups
>>> driver.name: usbhid-ups
>>> driver.parameter.pollfreq: 30
>>> driver.parameter.pollinterval: 2
>>> driver.parameter.port: auto
>>> driver.parameter.productid: 0000
>>> driver.parameter.synchronous: no
>>> driver.version: 2.7.4
>>> driver.version.data: Belkin/Liebert HID 0.17
>>> driver.version.internal: 0.41
>>> ups.mfr: Emerson Network Power
>>> ups.model: Liebert GXT4
>>> ups.productid: 0000
>>> ups.serial: 1718700042AFB93
>>> ups.status: OL CHRG
>>> ups.vendorid: 10af
>>>
>>> I'm not sure how to find the version of NUT I'm running. I
found the
>>> changelog (/usr/share/doc/nut) and I'm guessing this is my
issue. It
>>> appears the latest comment was from 2017.
>>>
>>> nut (2.7.4-5) unstable; urgency=medium
>>>
>>> * debian/control: Build-depends against asciidoc-dblatex,
Recommends
>>> are not
>>> pulled automatically by the buildd (Closes: #851015)
>>>
>>> -- Laurent Bigonville <bigon at debian.org> Wed, 25 Jan
2017 09:14:10
>>> +0100
>>>
>>> I am guessing I need to install a newer version. Is this correct?
>>>
>>> Thanks,
>>> Matt
>>> _______________________________________________
>>> Nut-upsuser mailing list
>>> Nut-upsuser at alioth-lists.debian.net
>>>
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20210228/9c28eb77/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: compile nut.zip
Type: application/x-zip-compressed
Size: 18164 bytes
Desc: not available
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20210228/9c28eb77/attachment-0002.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: NUT Liebert Output.zip
Type: application/x-zip-compressed
Size: 2475 bytes
Desc: not available
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20210228/9c28eb77/attachment-0003.bin>