Joe Reid
2020-Dec-10 22:43 UTC
[Nut-upsuser] This Liebert device (10af:0002) is not supported. Newer Lithium PSI5 device.
[networkups] driver = usbhid-ups port = auto desc = "Network Closet UPS" productid = 0002 is what's in my ups.conf On 12/10/2020 2:44 PM, Lucas Keipper wrote:> Hi there. I have a new Liebert Vertiv PSI5 Lithium UPS connected to my > Ubuntu 18.04 box via USB that I am trying to configure with NUT. This > device is not on the HCL, but should be pretty similar to the PSI > 1440 USB which uses the usbhid-ups driver. (or I'm completely wrong, > but it's a similar product family...) > > I know it's not officially supported, but if someone would like to use > me as the guinea pig for the correct driver settings then I'm open to > some additional testing. > > ups.conf entry: > [VertivPSI5-lithium] > driver = usbhid-ups > port = auto > > "sudo /sbin/upsdrvctl start" outputs the below: > > Network UPS Tools - UPS driver controller 2.7.4 > Network UPS Tools - Generic HID driver 0.41 (2.7.4) > USB communication driver 0.33 > This Liebert device (10af:0002) is not (or perhaps not yet) supported > by usbhid-ups. Please make sure you have an up-to-date version of NUT. If > this does not fix the problem, try running the driver with the > '-x productid=0002' option. Please report your results to the NUT user's > mailing list <nut-upsuser at lists.alioth.debian.org > <mailto:nut-upsuser at lists.alioth.debian.org>>. > > How do I "run the driver with -x ..."? I've tried adding it to the end > of the command line and adding it to the ups.conf file, but neither work. > > I have updated the system via apt. > > NUT version is: 2.7.4-5.1ubuntu2 > > Thanks! > > — > Lucas Keipper > IT Consultant & Owner > LMK Consulting > (980) 621-6728 > lmkconsulting.net <http://www.lmkconsulting.net> > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at alioth-lists.debian.net > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser-- joe
Lucas Keipper
2020-Dec-11 20:01 UTC
[Nut-upsuser] This Liebert device (10af:0002) is not supported. Newer Lithium PSI5 device.
I added the 'productid = 0002' line to my ups.conf and get this new output: sudo /sbin/upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33 Can't claim USB device [10af:0002]: could not detach kernel driver from interface 0: Operation not permitted Driver failed to start (exit status=1) Anything else I can try? — Lucas Keipper IT Consultant & Owner LMK Consulting (980) 621-6728 lmkconsulting.net <http://www.lmkconsulting.net> On Thu, Dec 10, 2020 at 6:03 PM Joe Reid <jreid at vnet.net> wrote:> [networkups] > driver = usbhid-ups > port = auto > desc = "Network Closet UPS" > productid = 0002 > > is what's in my ups.conf > > > On 12/10/2020 2:44 PM, Lucas Keipper wrote: > > Hi there. I have a new Liebert Vertiv PSI5 Lithium UPS connected to my > > Ubuntu 18.04 box via USB that I am trying to configure with NUT. This > > device is not on the HCL, but should be pretty similar to the PSI > > 1440 USB which uses the usbhid-ups driver. (or I'm completely wrong, > > but it's a similar product family...) > > > > I know it's not officially supported, but if someone would like to use > > me as the guinea pig for the correct driver settings then I'm open to > > some additional testing. > > > > ups.conf entry: > > [VertivPSI5-lithium] > > driver = usbhid-ups > > port = auto > > > > "sudo /sbin/upsdrvctl start" outputs the below: > > > > Network UPS Tools - UPS driver controller 2.7.4 > > Network UPS Tools - Generic HID driver 0.41 (2.7.4) > > USB communication driver 0.33 > > This Liebert device (10af:0002) is not (or perhaps not yet) supported > > by usbhid-ups. Please make sure you have an up-to-date version of NUT. If > > this does not fix the problem, try running the driver with the > > '-x productid=0002' option. Please report your results to the NUT user's > > mailing list <nut-upsuser at lists.alioth.debian.org > > <mailto:nut-upsuser at lists.alioth.debian.org>>. > > > > How do I "run the driver with -x ..."? I've tried adding it to the end > > of the command line and adding it to the ups.conf file, but neither work. > > > > I have updated the system via apt. > > > > NUT version is: 2.7.4-5.1ubuntu2 > > > > Thanks! > > > > — > > Lucas Keipper > > IT Consultant & Owner > > LMK Consulting > > (980) 621-6728 > > lmkconsulting.net <http://www.lmkconsulting.net> > > > > _______________________________________________ > > Nut-upsuser mailing list > > Nut-upsuser at alioth-lists.debian.net > > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser > > > -- > joe > > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at alioth-lists.debian.net > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20201211/49c72ab3/attachment.html>