On Friday 10 January 2020 07:52:47 Gene Heskett wrote:
> > Not sure where that message is coming from, but glad it worked with
> > the newer aclocal. (Did you use the release tarball, or a Git
> > checkout?)
>
> Release 2.7.4 tarball. Docs are years out of date, man pages claim
> 2.7.3 dated in 2015... But it works, and thats what counts. :)
Got it wired up and running the pi. It cannot see the pi as a load, but I
do see a concern or two which I'll mark in this
report:>pi at rpi4:~ $ upsc myups
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 7650
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 14.5
battery.voltage.nominal: 12
device.mfr: CPS
device.model: CP625HGa
device.type: ups
driver.name: usbhid-ups
driver.parameter.offdelay: 120
driver.parameter.ondelay: 0
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.data: CyberPower HID 0.4
driver.version.internal: 0.41
input.transfer.high: 0 ???? Shouldn't these two be something real ????
input.transfer.low: 0 ???? ditto
input.voltage: 123.0
input.voltage.nominal: 120
output.voltage: 123.0
ups.beeper.status: enabled
ups.delay.shutdown: 120
ups.delay.start: 0
ups.load: 0 chuckle, pi's don't draw much
ups.mfr: CPS
ups.model: CP625HGa
ups.productid: 0501
ups.realpower.nominal: 375
ups.status: OL
ups.test.result: No test initiated
ups.timer.shutdown: -60
ups.timer.start: 0
I have a 30 amp Corfam brick wall line filter between the line cord to
the ups, and the 25 watt 5 volt switcher driving the rpi4.
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/gene>