Hello, sorry for disturbing the list but i am just an "amateur" and have problem to configure the nut network For the config I have one NUT server and want ot have two clients The client on the NUT server is running well but the client on the network is not able to connect to the server The NUT server is an ubuntu 18.04 machine. If I run the nut monitor on the server, the monitor found the ups. If I replace localhost by the staticĀ ip address ie 192.168.1.106 it doesnt work anymore. if I replace localhost by 127.0.0.1 it is ok If I ping the static ip address it is ok The machine has only one physical network interface, but there is docker and many virtual interface. If any body can help me i will be very happy ! Best regards Thierry Vorms
On Fri, 30 Aug 2019, Thierry Vorms wrote:> sorry for disturbing the list but i am just an "amateur" and have problem to > configure the nut network > > For the config I have one NUT server and want ot have two clients > > The client on the NUT server is running well but the client on the network is > not able to connect to the serverDid you open the port in the server firewall? -- Stuart D. Gathman <stuart at gathman.org> "Confutatis maledictis, flamis acribus addictis" - background song for a Microsoft sponsored "Where do you want to go from here?" commercial.
On 30.08.19 21:50, Thierry Vorms wrote:>For the config I have one NUT server and want ot have two clients > >The client on the NUT server is running well but the client on the >network is not able to connect to the server > >The NUT server is an ubuntu 18.04 machine. > >If I run the nut monitor on the server, the monitor found the ups. > >If I replace localhost by the staticĀ ip address ie 192.168.1.106 it >doesnt work anymore. > >if I replace localhost by 127.0.0.1 it is ok > >If I ping the static ip address it is ok > >The machine has only one physical network interface, but there is >docker and many virtual interface.NUT server must listen on IP that is available for remote hosts. you should have directive LISTEN :: 3493 or LISTEN 0.0.0.0 3493 ... and have connections to port 3493 allowe from remote hosts in your machine firewall, as Stuart noted. -- Matus UHLAR - fantomas, uhlar at fantomas.sk ; http://www.fantomas.sk/ Warning: I wish NOT to receive e-mail advertising to this address. Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu. BSE = Mad Cow Desease ... BSA = Mad Software Producents Desease