Sergio Belkin
2016-Aug-12 17:56 UTC
[Nut-upsuser] SMART-UPS 2200 RM: No supported device detected
Hi, I have two UPS SMART-UPS 2200 RM both of them have the same configuration.One of them works fine, but the other one it doesn't, it output as follows: snmp-ups -D -a nutdev10 Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) 0.000000 debug level is '1' 0.001013 SNMP UPS driver : entering upsdrv_initups() 0.048606 trying the new match_sysoid() method 6.070451 load_mib2nut: trying classic method with 'apcc' mib 12.077390 load_mib2nut: trying classic method with 'mge' mib 18.084471 load_mib2nut: trying classic method with 'netvision' mib 24.091517 load_mib2nut: trying classic method with 'pw' mib 30.097972 load_mib2nut: trying classic method with 'aphel_genesisII' mib 36.104565 load_mib2nut: trying classic method with 'aphel_revelation' mib 42.111616 load_mib2nut: trying classic method with 'eaton_epdu' mib 48.118655 load_mib2nut: trying classic method with 'pulizzi_switched1' mib 54.125753 load_mib2nut: trying classic method with 'pulizzi_switched2' mib 60.132715 load_mib2nut: trying classic method with 'raritan' mib 66.139648 load_mib2nut: trying classic method with 'baytech' mib 72.146274 load_mib2nut: trying classic method with 'cpqpower' mib 78.153277 load_mib2nut: trying classic method with 'bestpower' mib 84.160268 load_mib2nut: trying classic method with 'cyberpower' mib 90.167252 load_mib2nut: trying classic method with 'delta_ups' mib 90.167275 load_mib2nut: trying classic method with 'xppc' mib 90.167281 load_mib2nut: trying classic method with 'ietf' mib 96.174289 No supported device detected You may want to take a look output with higher debug level: http://pastebin.com/GEcxkjv7 Both of them use snmpv3 with SHA1 and DES What could it be wrong? Thanks in advance! -- -- Sergio Belkin LPIC-2 Certified - http://www.lpi.org -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20160812/48732da2/attachment.html>