ups: atlantis-land HostPower Sinewave Line Interactive 1501 A03-HP1501
distro: ubuntustudio 9.10
nut: 2.4.1
driver: megatec_usb
using upsc i can get ups value (voltage, battery, etc) but on terminal i get
lots and lots of these messages:
-------------------------------------------------------------
Broadcast Message from nut at maialinux
(somewhere) at 2:40 ...
Communications with UPS myups at localhost lost
Broadcast Message from nut at maialinux
(somewhere) at 2:40 ...
Communications with UPS myups at localhost established
-------------------------------------------------------------
and /var/log/daemon.log is full of
Mar 14 02:42:35 maialinux megatec_usb[2767]: ser_send_pace: Device detached?
(error -5: error sending control message: Operation not permitted)
Mar 14 02:42:35 maialinux megatec_usb[2767]: Successfully reconnected
Mar 14 02:42:35 maialinux upsmon[2776]: Poll UPS [myups at localhost] failed -
Data
stale
Mar 14 02:42:35 maialinux upsmon[2776]: Communications with UPS myups at
localhost
lost
Mar 14 02:42:37 maialinux upsd[2769]: UPS [myups] data is no longer stale
Mar 14 02:42:39 maialinux megatec_usb[2767]: ser_send_pace: Device detached?
(error -5: error sending control message: Operation not permitted)
Mar 14 02:42:39 maialinux megatec_usb[2767]: Successfully reconnected
any ideas?
thanx
? Sun, 14 Mar 2010 03:00:33 +0100 ricman at neomedia.it ?????:> > ups: atlantis-land HostPower Sinewave Line Interactive 1501 A03-HP1501 > distro: ubuntustudio 9.10 > nut: 2.4.1 > driver: megatec_usb > > > using upsc i can get ups value (voltage, battery, etc) but on terminal i get > lots and lots of these messages: > > ------------------------------------------------------------- > > Broadcast Message from nut at maialinux > (somewhere) at 2:40 ... > > Communications with UPS myups at localhost lost > > > Broadcast Message from nut at maialinux > (somewhere) at 2:40 ... > > Communications with UPS myups at localhost established > > ------------------------------------------------------------- > > and /var/log/daemon.log is full of > > Mar 14 02:42:35 maialinux megatec_usb[2767]: ser_send_pace: Device detached? > (error -5: error sending control message: Operation not permitted) > Mar 14 02:42:35 maialinux megatec_usb[2767]: Successfully reconnected > Mar 14 02:42:35 maialinux upsmon[2776]: Poll UPS [myups at localhost] failed - Data > stale > Mar 14 02:42:35 maialinux upsmon[2776]: Communications with UPS myups at localhost > lost > Mar 14 02:42:37 maialinux upsd[2769]: UPS [myups] data is no longer stale > Mar 14 02:42:39 maialinux megatec_usb[2767]: ser_send_pace: Device detached? > (error -5: error sending control message: Operation not permitted) > Mar 14 02:42:39 maialinux megatec_usb[2767]: Successfully reconnected > > > any ideas?Could you please try blazer_usb driver and report back the results? megatec_usb is now deprecated. -- Alexander -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 490 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20100314/cfd7dd8c/attachment.pgp>
Scrive Alexander Gordeev <lasaine at lvk.cs.msu.su>:> ?? Sun, 14 Mar 2010 03:00:33 +0100 > ricman at neomedia.it ??????????: > > > > > ups: atlantis-land HostPower Sinewave Line Interactive 1501 A03-HP1501 > > distro: ubuntustudio 9.10 > > nut: 2.4.1 > > driver: megatec_usb > > > > > > using upsc i can get ups value (voltage, battery, etc) but on terminal i > get > > lots and lots of these messages: > > > > ------------------------------------------------------------- > > > > Broadcast Message from nut at maialinux > > > (somewhere) at 2:40 ... > > > > > > Communications with UPS myups at localhost lost > > > > > > > > > Broadcast Message from nut at maialinux > > > (somewhere) at 2:40 ... > > > > > > Communications with UPS myups at localhost established > > > > ------------------------------------------------------------- > > > > and /var/log/daemon.log is full of > > > > Mar 14 02:42:35 maialinux megatec_usb[2767]: ser_send_pace: Device > detached? > > (error -5: error sending control message: Operation not permitted) > > Mar 14 02:42:35 maialinux megatec_usb[2767]: Successfully reconnected > > Mar 14 02:42:35 maialinux upsmon[2776]: Poll UPS [myups at localhost] failed - > Data > > stale > > Mar 14 02:42:35 maialinux upsmon[2776]: Communications with UPS > myups at localhost > > lost > > Mar 14 02:42:37 maialinux upsd[2769]: UPS [myups] data is no longer stale > > Mar 14 02:42:39 maialinux megatec_usb[2767]: ser_send_pace: Device > detached? > > (error -5: error sending control message: Operation not permitted) > > Mar 14 02:42:39 maialinux megatec_usb[2767]: Successfully reconnected > > > > > > any ideas? > > Could you please try blazer_usb driver and report back the results? > megatec_usb is now deprecated. > > -- > Alexander >same issue (both terminal and log) Mar 14 22:48:13 maialinux blazer_usb[2638]: Communications with UPS lost: status read failed! Mar 14 22:48:16 maialinux blazer_usb[2638]: Communications with UPS re-established Mar 14 22:48:17 maialinux blazer_usb[2638]: Communications with UPS lost: status read failed! Mar 14 22:48:23 maialinux blazer_usb[2638]: last message repeated 2 times Mar 14 22:48:23 maialinux upsd[2640]: Data for UPS [myups] is stale - check driver Mar 14 22:48:25 maialinux upsmon[2647]: Poll UPS [myups at localhost] failed - Data stale Mar 14 22:48:25 maialinux upsmon[2647]: Communications with UPS myups at localhost lost Mar 14 22:48:26 maialinux blazer_usb[2638]: Communications with UPS re-established Mar 14 22:48:26 maialinux upsd[2640]: UPS [myups] data is no longer stale Mar 14 22:48:27 maialinux blazer_usb[2638]: Communications with UPS lost: status read failed!
Citeren ricman <ricman op neomedia.it>:> same issue (both terminal and log) > > Mar 14 22:48:13 maialinux blazer_usb[2638]: Communications with UPS > lost: status > read failed! > Mar 14 22:48:16 maialinux blazer_usb[2638]: Communications with UPS > re-established > Mar 14 22:48:17 maialinux blazer_usb[2638]: Communications with UPS > lost: status > read failed! > Mar 14 22:48:23 maialinux blazer_usb[2638]: last message repeated 2 times > Mar 14 22:48:23 maialinux upsd[2640]: Data for UPS [myups] is stale - check > driver > Mar 14 22:48:25 maialinux upsmon[2647]: Poll UPS [myups op localhost] > failed - Data > stale > Mar 14 22:48:25 maialinux upsmon[2647]: Communications with UPS > myups op localhost > lost > Mar 14 22:48:26 maialinux blazer_usb[2638]: Communications with UPS > re-established > Mar 14 22:48:26 maialinux upsd[2640]: UPS [myups] data is no longer stale > Mar 14 22:48:27 maialinux blazer_usb[2638]: Communications with UPS > lost: status > read failed!If the USB ID of this device is 06da:0003, upgrading to nut-2.4.2 is definitely worth a try (and if it is different, it still might be). We have reworked a lot of USB stuff in this release, so the problem may have been resolved in the mean time. Best regards, Arjen -- Please keep list traffic on the list