Just trying to use NUT for the first time - clues welcome.
Philip J. Tait
http://subarutelescope.org
=============================After configuring (details below), I get:
# upsdrvctl start
Network UPS Tools - UPS driver controller 2.2.0-
Network UPS Tools - Multi-MIBS SNMP UPS driver 0.42 (2.2.0-)
Warning: This is an experimental driver.
Some features may not function correctly.
Unknown mibs value: auto
================/etc/ups/ups.conf contents:
[ups3liebert]
driver = snmp-ups
port = ups3.sum.naoj.org
desc = "Summit computer room"
mibs =auto
snmp_version = v1
===============First few lines of output from "snmpwalk -c public -v 1
ups3":
iso.3.6.1.2.1.1.1.0 = STRING: "Liebert UPS SNMP agent."
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.476.1.1.1.5
iso.3.6.1.2.1.1.3.0 = Timeticks: (18956244) 2 days, 4:39:22.44
iso.3.6.1.2.1.1.4.0 = STRING: "ryu at naoj.org"
iso.3.6.1.2.1.1.5.0 = STRING: "ups3"
iso.3.6.1.2.1.1.6.0 = STRING: "Subaru CB"
iso.3.6.1.2.1.1.7.0 = INTEGER: 72
iso.3.6.1.2.1.2.1.0 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.2.1 = STRING: "Liebert Ethernet Adapter unit 0"
iso.3.6.1.2.1.2.2.1.3.1 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.4.1 = INTEGER: 1500
iso.3.6.1.2.1.2.2.1.5.1 = Gauge32: 10000000
iso.3.6.1.2.1.2.2.1.6.1 = Hex-STRING: 00 00 68 11 35 89
iso.3.6.1.2.1.2.2.1.7.1 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.8.1 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.9.1 = Timeticks: (0) 0:00:00.00
On Tue, Jan 12, 2010 at 4:29 PM, Philip Tait <philip at subaru.naoj.org> wrote:> After configuring (details below), I get: > > # upsdrvctl start > > Network UPS Tools - UPS driver controller 2.2.0- > Network UPS Tools - Multi-MIBS SNMP UPS driver 0.42 (2.2.0-) > Warning: This is an experimental driver. > Some features may not function correctly. > > Unknown mibs value: autoThis should be a permitted option, even in 2.2.0. Is there a chance that some control characters got copied into the configuration file? -- - Charles Lepple