Nut upsuser - Jan 2009 - APC Ups with auto port fails to shut down

Hi,
I have set the driver name to newhidups and the port to auto. The status of
the UPS is connected but it does not shutdown when the FINALDELAY value in
the upsmon.conf is reached.
If I change the port value in the ups.conf from auto to a specific port
value, it works fine.
Any ideas?
If I leave the specific port value, when it shuts down, this value changes
and get reassigned, which is not the desired solution.
Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20090112/fd4dd0f7/attachment.htm

On Jan 12, 2009, at 6:15 PM, Alberto Rocha wrote:
> Hi,
> I have set the driver name to newhidups and the port to auto.
What version of NUT are you using?
> The status of the UPS is connected but it does not shutdown when  
> the FINALDELAY value in the upsmon.conf is reached.
> If I change the port value in the ups.conf from auto to a specific  
> port value, it works fine.
> Any ideas?
> If I leave the specific port value, when it shuts down, this value  
> changes and get reassigned, which is not the desired solution.
> Thanks

Would you please post your ups.conf file?

Also, how are you setting permissions on the USB device node? (/proc/ 
bus/usb/*/* or /dev/bus/usb/*/*)

-- 
Charles Lepple
clepple at gmail



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20090112/3a1a2897/attachment.htm