Never had a problem until dist-upgrade this morning: UPS belkin at localhost battery is low Which is not true, it shows the charge as 100% I think a bad push was done for nut in Debian/testing? $ upsc belkin at localhost battery.charge: 100 battery.charge.low: 30 battery.charge.warning: 50 battery.runtime: 210 battery.type: PbAc battery.voltage: 27.1 battery.voltage.nominal: 24 driver.name: newhidups driver.parameter.pollfreq: 5 driver.parameter.port: auto driver.version: 2.0.5 driver.version.data: Belkin HID 0.1 driver.version.internal: 0.30 input.frequency: 59.8 input.frequency.nominal: 60 input.sensitivity: normal input.transfer.high: 136 input.transfer.high.max: 141 input.transfer.high.min: 131 input.transfer.low: 90 input.transfer.low.max: 95 input.transfer.low.min: 85 input.voltage: 123.4 input.voltage.nominal: 120 output.frequency: 59.8 output.voltage: 123.4 ups.beeper.status: enabled ups.delay.restart: 0 ups.delay.shutdown: 0 ups.firmware: 4 ups.load: 33 ups.load.high: 100 ups.mfr: Belkin ups.mfr.date: 2002/03/01 ups.model: UPS ups.power.nominal: 1200 ups.serial: D2002337105 ups.status: OL CHRG ups.test.result: No test initiated ups.type: offline