Thanks for the HCL report. Is the "problem" is "no OID found, tell devs"? - it is a benign message (muted in modern NUT - 2.7.4 is quite old) meaning that a subdriver match happened differently (per evidence - data is reported). Jim On Fri, Dec 30, 2022, 17:25 Ireneusz Grycuk <igrycuk at wiredbit.com> wrote:> Hello NUT dev! > > Reporting problem with NUT controller connected via SNMP v1 to Vertiv > PSI5-1500RT120 UPS: > > > Network UPS Tools - UPS driver controller 2.7.4 > Network UPS Tools - Generic SNMP UPS driver 0.97 (2.7.4) > No matching MIB found for sysOID '.1.3.6.1.4.1.476.1.42'! > Please report it to NUT developers, with an 'upsc' output for your device. > Going back to the classic MIB detection method. > Detected PSI5-1500RT120 on host 10.1.1.32 (mib: ietf 1.5) > > $ upsc UPS01 > Init SSL without certificate database > battery.charge: 100.00 > battery.runtime: 1260.00 > battery.runtime.low: 120.00 > battery.voltage: 54.00 > device.mfr: Vertiv > device.model: PSI5-1500RT120 > device.type: ups > driver.name: snmp-ups > driver.parameter.pollfreq: 15 > driver.parameter.pollinterval: 2 > driver.parameter.port: 10.1.1.32 > driver.parameter.snmp_version: v1 > driver.parameter.synchronous: no > driver.version: 2.7.4 > driver.version.data: ietf MIB 1.5 > driver.version.internal: 0.97 > input.current: 5.00 > input.frequency: 60.00 > input.frequency.nominal: 60.00 > input.phases: 1.00 > input.voltage: 115.00 > input.voltage.nominal: 120.00 > output.current: 4.40 > output.frequency: 60.00 > output.frequency.nominal: 60.00 > output.phases: 1.00 > output.power.nominal: 1500.00 > output.voltage: 115.00 > output.voltage.nominal: 120.00 > ups.beeper.status: enabled > ups.firmware: 02418.03 > ups.firmware.aux: 8.2.0.0 > ups.mfr: Vertiv > ups.model: PSI5-1500RT120 > ups.start.auto: yes > ups.status: OL > ups.test.result: done and passed > ups.timer.reboot: 0 > ups.timer.shutdown: 0 > ups.timer.start: 0 > > > Regards, > -- > ------------------------------ > IRENEUSZ GRYCUK > CEO & Software Architect > Mobile: +48 692 786 248 <+48692786248> > E-Mail: igrycuk at wiredbit.com > www.wiredbit.com > Confidentiality Notice: This email and its attachments (if any) contain > confidential information of the sender. The information is intended only > for the use by the direct addressees of the original sender of this email. > If you are not an intended recipient of the original sender (or responsible > for delivering the message to such person), you are hereby notified that > any review, disclosure, copying, distribution or the taking of any action > in reliance of the contents of and attachments to this email is strictly > prohibited. If you have received this email in error, please immediately > notify the sender at the address shown herein and permanently delete any > copies of this email (digital or paper) in your possession. > _______________________________________________ > Nut-upsdev mailing list > Nut-upsdev at alioth-lists.debian.net > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20221230/c44b3ddd/attachment.htm>
Ireneusz Grycuk
2022-Dec-30 22:13 UTC
[Nut-upsdev] Vertiv PSI5-1500RT120 no matching MIB found
Hello Jim! There is no problem - as you mentioned: the data is reported. I just wanted to let you know, for the record, besides - NUT made me do it ;) The only thing I noticed is that in case of PSI5-1500RT120 NUT (v2.7.4) doesn't report the ups.load value, do you know if this has been added in the newer wesion? Regards, ------------------------------------------------------------------------ IRENEUSZ?GRYCUK CEO?&?Software?Architect Mobile: +48?692?786?248 <tel:+48692786248> E-Mail: igrycuk at wiredbit.com www.wiredbit.com <https://www.wiredbit.com> Confidentiality Notice: This email and its attachments (if any) contain confidential information of the sender. The information is intended only for the use by the direct addressees of the original sender of this email. If you are not an intended recipient of the original sender (or responsible for delivering the message to such person), you are hereby notified that any review, disclosure, copying, distribution or the taking of any action in reliance of the contents of and attachments to this email is strictly prohibited. If you have received this email in error, please immediately notify the sender at the address shown herein and permanently delete any copies of this email (digital or paper) in your possession. On 12/30/22 21:49, Jim Klimov wrote:> Thanks for the HCL report. > > Is the "problem" is "no OID found, tell devs"? - it is a benign > message (muted in modern NUT - 2.7.4 is quite old) meaning that a > subdriver match happened differently (per evidence - data is reported). > > Jim > > > On Fri, Dec 30, 2022, 17:25 Ireneusz Grycuk <igrycuk at wiredbit.com> wrote: > > Hello NUT dev! > > Reporting problem with NUT controller connected via SNMP v1 to > Vertiv PSI5-1500RT120 UPS: > > > Network UPS Tools - UPS driver controller 2.7.4 > Network UPS Tools - Generic SNMP UPS driver 0.97 (2.7.4) > No matching MIB found for sysOID '.1.3.6.1.4.1.476.1.42'! > Please report it to NUT developers, with an 'upsc' output for your > device. > Going back to the classic MIB detection method. > Detected PSI5-1500RT120 on host 10.1.1.32 (mib: ietf 1.5) > > $ upsc UPS01 > Init SSL without certificate database > battery.charge: 100.00 > battery.runtime: 1260.00 > battery.runtime.low: 120.00 > battery.voltage: 54.00 > device.mfr: Vertiv > device.model: PSI5-1500RT120 > device.type: ups > driver.name <http://driver.name>: snmp-ups > driver.parameter.pollfreq: 15 > driver.parameter.pollinterval: 2 > driver.parameter.port: 10.1.1.32 > driver.parameter.snmp_version: v1 > driver.parameter.synchronous: no > driver.version: 2.7.4 > driver.version.data: ietf MIB 1.5 > driver.version.internal: 0.97 > input.current: 5.00 > input.frequency: 60.00 > input.frequency.nominal: 60.00 > input.phases: 1.00 > input.voltage: 115.00 > input.voltage.nominal: 120.00 > output.current: 4.40 > output.frequency: 60.00 > output.frequency.nominal: 60.00 > output.phases: 1.00 > output.power.nominal: 1500.00 > output.voltage: 115.00 > output.voltage.nominal: 120.00 > ups.beeper.status: enabled > ups.firmware: 02418.03 > ups.firmware.aux: 8.2.0.0 > ups.mfr: Vertiv > ups.model: PSI5-1500RT120 > ups.start.auto: yes > ups.status: OL > ups.test.result: done and passed > ups.timer.reboot: 0 > ups.timer.shutdown: 0 > ups.timer.start: 0 > > > Regards, > -- > ------------------------------------------------------------------------ > IRENEUSZ?GRYCUK > CEO?&?Software?Architect > Mobile: +48?692?786?248 <tel:+48692786248> > E-Mail: igrycuk at wiredbit.com > www.wiredbit.com <https://www.wiredbit.com> > Confidentiality Notice: This email and its attachments (if any) > contain confidential information of the sender. The information is > intended only for the use by the direct addressees of the original > sender of this email. If you are not an intended recipient of the > original sender (or responsible for delivering the message to such > person), you are hereby notified that any review, disclosure, > copying, distribution or the taking of any action in reliance of > the contents of and attachments to this email is strictly > prohibited. If you have received this email in error, please > immediately notify the sender at the address shown herein and > permanently delete any copies of this email (digital or paper) in > your possession. > > _______________________________________________ > Nut-upsdev mailing list > Nut-upsdev at alioth-lists.debian.net > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20221230/7dae0809/attachment-0001.htm>