Hi Andreas,
I don't think that difference was intentional.
I've created a PR to resolve it:
https://github.com/NLnetLabs/nsd/pull/156
Thanks for pointing it out!
Cheers,
-- Willem
Op 13-02-2021 om 20:18 schreef A. Schulze via nsd-users:> Hello NSD-Developers,
>
> the "ip-address" statement accept an interface name. NSD will
listen on ip-addresses associated with that interface.
> That's nice.
>
> But the same does not work for "control-interface". Is this
intentional?
>
> server:
> ip-address: eth0
> verbosity: 9
> remote-control:
> control-enable: yes
> control-interface: eth1
>
> [2021-02-13 20:11:25.801] nsd[104]: info: interface eth0 has address
192.0.2.53
> [2021-02-13 20:11:25.801] nsd[104]: notice: nsd starting (NSD 4.3.5)
> [2021-02-13 20:11:25.801] nsd[104]: notice: listen on ip-address 192.0.2.53
at 53 (udp) with server(s): *
> [2021-02-13 20:11:25.801] nsd[104]: notice: listen on ip-address 192.0.2.53
at 53 (tcp) with server(s): *
> [2021-02-13 20:11:25.804] nsd[104]: error: control interface eth1:8952
getaddrinfo: Name or service not known
> [2021-02-13 20:11:25.804] nsd[104]: error: could not open remote control
port
> [2021-02-13 20:11:25.804] nsd[104]: error: could not perform remote control
setup
>
> Andreas
> _______________________________________________
> nsd-users mailing list
> nsd-users at lists.nlnetlabs.nl
> https://lists.nlnetlabs.nl/mailman/listinfo/nsd-users
>