Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 00/23] drm: Analog TV Improvements
Hi,
Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.
The named modes support were initially introduced to allow to specify the
analog TV mode to be used.
However, this was causing multiple issues:
* The mode name parsed on the command line was passed directly to the
driver, which had to figure out which mode it was suppose to match;
* Figuring that out wasn't really easy, since the video= argument or what
the userspace might not even have a name in the first place, but
instead could have passed a mode with the same timings;
* The fallback to matching on the timings was mostly working as long as
we were supporting one 525 lines (most likely NSTC) and one 625 lines
(PAL), but couldn't differentiate between two modes with the same
timings (NTSC vs PAL-M vs NSTC-J for example);
* There was also some overlap with the tv mode property registered by
drm_mode_create_tv_properties(), but named modes weren't interacting
with that property at all.
* Even though that property was generic, its possible values were
specific to each drivers, which made some generic support difficult.
Thus, I chose to tackle in multiple steps:
* A new TV mode property was introduced, with generic values, each driver
reporting through a bitmask what standard it supports to the userspace;
* This option was added to the command line parsing code to be able to
specify it on the kernel command line, and new atomic_check and reset
helpers were created to integrate properly into atomic KMS;
* The named mode parsing code is now creating a proper display mode for
the given named mode, and the TV standard will thus be part of the
connector state;
* Two drivers were converted and tested for now (vc4 and sun4i), with
some backward compatibility code to translate the old TV mode to the
new TV mode;
Unit tests were created along the way.
One can switch from NTSC to PAL now using (on vc4)
modetest -M vc4 -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4 -s 53:720x576i -w 53:'TV mode':4 # PAL
Let me know what you think,
Maxime
To: David Airlie <airlied at linux.ie>
To: Daniel Vetter <daniel at ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
To: Maxime Ripard <mripard at kernel.org>
To: Thomas Zimmermann <tzimmermann at suse.de>
To: Emma Anholt <emma at anholt.net>
To: Jani Nikula <jani.nikula at linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi at intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin at linux.intel.com>
To: Ben Skeggs <bskeggs at redhat.com>
To: Karol Herbst <kherbst at redhat.com>
To: Lyude Paul <lyude at redhat.com>
To: Chen-Yu Tsai <wens at csie.org>
To: Jernej Skrabec <jernej.skrabec at gmail.com>
To: Samuel Holland <samuel at sholland.org>
Cc: Geert Uytterhoeven <geert at linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
Cc: "Noralf Tr?nnes" <noralf at tronnes.org>
Cc: Dave Stevenson <dave.stevenson at raspberrypi.com>
Cc: Dom Cobley <dom at raspberrypi.com>
Cc: Phil Elwell <phil at raspberrypi.com>
Cc: <dri-devel at lists.freedesktop.org>
Cc: linux-kernel at vger.kernel.org
Cc: intel-gfx at lists.freedesktop.org
Cc: nouveau at lists.freedesktop.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-sunxi at lists.linux.dev
Cc: Hans de Goede <hdegoede at redhat.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v7:
- Switch to another implementation of get_modes from Noralf
- Made more checks in VEC's atomic_check
- Fixed typo in a commit log
- Checked for tv_mode_specified in drm_mode_parse_command_line_for_connector
- Rebased on drm-misc-next-2022-11-03
- Link to v6:
https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f at
cerno.tech
Changes in v6:
- Add and convert to a new get_modes helper to create the PAL and NTSC modes in
the proper order, with the right preferred mode flag, depending on the driver
capabilities and defaults.
- Support PAL60
- Renamed tests to be consistent with DRM tests naming convention
- Simplified a bit the named mode parsing code
- Add a tv_mode_specified field
- Return 0 in get_modes implementations instead of error codes
- Link to v5:
https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b at
cerno.tech
Changes in v5:
- Dropped TV Standard documentation removal
- Switched the TV Mode documentation from CSV to actual documentation
- Switched to kunit assertions where possible
- Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., NULL)
- Shuffled a bit the introduction of drm_client_modeset_connector_get_modes
between patches
- Renamed tv_mode_names to legacy_tv_mode_names
- Removed the count variable in sun4i_tv_comp_get_modes
- Rebased on top of current drm-misc-next
- Link to v4:
https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782 at
cerno.tech
Changes in v4:
- Removed the unused TV Standard property documentation
- Added the TV Mode property documentation to kms-properties.csv
- Fixed the documentation of drm_mode_create_tv_properties()
- Removed DRM_MODE_TV_MODE_NONE
- Reworded the line length check comment in drm_mode_analog_tv tests
- Switched to HZ_PER_KHZ in drm_mode_analog_tv tests
- Reworked drm_mode_analog_tv to fill our mode using the previously computed
timings
- Added the command-line option documentation to modedb.rst
- Improved the Kunit helpers cleanup
- Moved the subconnector documentation renaming to the proper patch
- Added the various review tags
- Removed the count variable in vc4_vec_connector_get_modes
- Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict
- Folded all the named mode parsing improvements in a single patch
- Link to v3:
https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90 at
cerno.tech
Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2:
https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7
at cerno.tech/
Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers
functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1:
https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097
at cerno.tech/
---
Mateusz Kwiatkowski (2):
drm/vc4: vec: Check for VEC output constraints
drm/vc4: vec: Add support for more analog TV standards
Maxime Ripard (20):
drm/tests: Add Kunit Helpers
drm/connector: Rename legacy TV property
drm/connector: Only register TV mode property if present
drm/connector: Rename drm_mode_create_tv_properties
drm/connector: Add TV standard property
drm/modes: Add a function to generate analog display modes
drm/client: Add some tests for drm_connector_pick_cmdline_mode()
drm/modes: Move named modes parsing to a separate function
drm/modes: Switch to named mode descriptors
drm/modes: Fill drm_cmdline mode from named modes
drm/connector: Add pixel clock to cmdline mode
drm/connector: Add a function to lookup a TV mode by its name
drm/modes: Introduce the tv_mode property as a command-line option
drm/modes: Properly generate a drm_display_mode from a named mode
drm/modes: Introduce more named modes
drm/atomic-helper: Add a TV properties reset helper
drm/atomic-helper: Add an analog TV atomic_check implementation
drm/vc4: vec: Use TV Reset implementation
drm/vc4: vec: Convert to the new TV mode property
drm/sun4i: tv: Convert to the new TV mode property
Noralf Tr?nnes (1):
drm/probe-helper: Provide a TV get_modes helper
Documentation/fb/modedb.rst | 2 +
Documentation/gpu/drm-kms.rst | 6 +
drivers/gpu/drm/drm_atomic_state_helper.c | 124 +++++
drivers/gpu/drm/drm_atomic_uapi.c | 4 +
drivers/gpu/drm/drm_client_modeset.c | 4 +
drivers/gpu/drm/drm_connector.c | 173 ++++++-
drivers/gpu/drm/drm_modes.c | 639 +++++++++++++++++++++++-
drivers/gpu/drm/drm_probe_helper.c | 97 ++++
drivers/gpu/drm/gud/gud_connector.c | 10 +-
drivers/gpu/drm/i2c/ch7006_drv.c | 6 +-
drivers/gpu/drm/i915/display/intel_tv.c | 5 +-
drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 6 +-
drivers/gpu/drm/sun4i/sun4i_tv.c | 141 ++----
drivers/gpu/drm/tests/Makefile | 3 +
drivers/gpu/drm/tests/drm_client_modeset_test.c | 229 +++++++++
drivers/gpu/drm/tests/drm_cmdline_parser_test.c | 67 +++
drivers/gpu/drm/tests/drm_connector_test.c | 90 ++++
drivers/gpu/drm/tests/drm_kunit_helpers.c | 61 +++
drivers/gpu/drm/tests/drm_kunit_helpers.h | 9 +
drivers/gpu/drm/tests/drm_modes_test.c | 144 ++++++
drivers/gpu/drm/vc4/vc4_vec.c | 342 +++++++++++--
include/drm/drm_atomic_state_helper.h | 4 +
include/drm/drm_connector.h | 89 +++-
include/drm/drm_mode_config.h | 12 +-
include/drm/drm_modes.h | 17 +
include/drm/drm_probe_helper.h | 1 +
26 files changed, 2081 insertions(+), 204 deletions(-)
---
base-commit: 3b536e43463ed91b7bf9acec1eb4da0bc677dc43
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460
Best regards,
--
Maxime Ripard <maxime at cerno.tech>
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 01/23] drm/tests: Add Kunit Helpers
As the number of kunit tests in KMS grows further, we start to have
multiple test suites that, for example, need to register a mock DRM
driver to interact with the KMS function they are supposed to test.
Let's add a file meant to provide those kind of helpers to avoid
duplication.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v4:
- Simplified the DRM device cleanup patch using devm_drm_dev_alloc()
---
drivers/gpu/drm/tests/Makefile | 1 +
drivers/gpu/drm/tests/drm_kunit_helpers.c | 61 +++++++++++++++++++++++++++++++
drivers/gpu/drm/tests/drm_kunit_helpers.h | 9 +++++
3 files changed, 71 insertions(+)
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index 2d9f49b62ecb..b29ef1085cad 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
drm_format_helper_test.o \
drm_format_test.o \
drm_framebuffer_test.o \
+ drm_kunit_helpers.o \
drm_mm_test.o \
drm_plane_helper_test.o \
drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.c
b/drivers/gpu/drm/tests/drm_kunit_helpers.c
new file mode 100644
index 000000000000..3524d6a1fa9a
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.c
@@ -0,0 +1,61 @@
+#include <drm/drm_drv.h>
+#include <drm/drm_managed.h>
+
+#include <kunit/resource.h>
+
+#include <linux/device.h>
+
+struct kunit_dev {
+ struct drm_device base;
+};
+
+static const struct drm_mode_config_funcs drm_mode_config_funcs = {
+};
+
+static const struct drm_driver drm_mode_driver = {
+};
+
+static int dev_init(struct kunit_resource *res, void *ptr)
+{
+ char *name = ptr;
+ struct device *dev;
+
+ dev = root_device_register(name);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ res->data = dev;
+ return 0;
+}
+
+static void dev_free(struct kunit_resource *res)
+{
+ struct device *dev = res->data;
+
+ root_device_unregister(dev);
+}
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, char *name)
+{
+ struct kunit_dev *kdev;
+ struct drm_device *drm;
+ struct device *dev;
+ int ret;
+
+ dev = kunit_alloc_resource(test, dev_init, dev_free, GFP_KERNEL, name);
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ kdev = devm_drm_dev_alloc(dev, &drm_mode_driver, struct kunit_dev, base);
+ if (IS_ERR(kdev))
+ return ERR_CAST(kdev);
+
+ drm = &kdev->base;
+ drm->mode_config.funcs = &drm_mode_config_funcs;
+
+ ret = drmm_mode_config_init(drm);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return drm;
+}
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.h
b/drivers/gpu/drm/tests/drm_kunit_helpers.h
new file mode 100644
index 000000000000..a9354f9bda4e
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.h
@@ -0,0 +1,9 @@
+#ifndef DRM_KUNIT_HELPERS_H_
+#define DRM_KUNIT_HELPERS_H_
+
+struct drm_device;
+struct kunit;
+
+struct drm_device *drm_kunit_device_init(struct kunit *test, char *name);
+
+#endif // DRM_KUNIT_HELPERS_H_
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 02/23] drm/connector: Rename legacy TV property
The current tv_mode has driver-specific values that don't allow to
easily share code using it, either at the userspace or kernel level.
Since we're going to introduce a new, generic, property that fit the
same purpose, let's rename this one to legacy_tv_mode to make it
obvious we should move away from it.
Acked-by: Thomas Zimmermann <tzimmermann at suse.de>
Reviewed-by: Lyude Paul <lyude at redhat.com> # nouveau
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
drivers/gpu/drm/drm_atomic_uapi.c | 8 ++++----
drivers/gpu/drm/drm_connector.c | 6 +++---
drivers/gpu/drm/gud/gud_connector.c | 6 +++---
drivers/gpu/drm/i2c/ch7006_drv.c | 4 ++--
drivers/gpu/drm/i915/display/intel_tv.c | 3 ++-
drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 4 ++--
drivers/gpu/drm/vc4/vc4_vec.c | 8 ++++----
include/drm/drm_connector.h | 4 ++--
include/drm/drm_mode_config.h | 6 ++++--
9 files changed, 26 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c
b/drivers/gpu/drm/drm_atomic_uapi.c
index c06d0639d552..7f2b9a07fbdf 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -698,8 +698,8 @@ static int drm_atomic_connector_set_property(struct
drm_connector *connector,
state->tv.margins.top = val;
} else if (property == config->tv_bottom_margin_property) {
state->tv.margins.bottom = val;
- } else if (property == config->tv_mode_property) {
- state->tv.mode = val;
+ } else if (property == config->legacy_tv_mode_property) {
+ state->tv.legacy_mode = val;
} else if (property == config->tv_brightness_property) {
state->tv.brightness = val;
} else if (property == config->tv_contrast_property) {
@@ -808,8 +808,8 @@ drm_atomic_connector_get_property(struct drm_connector
*connector,
*val = state->tv.margins.top;
} else if (property == config->tv_bottom_margin_property) {
*val = state->tv.margins.bottom;
- } else if (property == config->tv_mode_property) {
- *val = state->tv.mode;
+ } else if (property == config->legacy_tv_mode_property) {
+ *val = state->tv.legacy_mode;
} else if (property == config->tv_brightness_property) {
*val = state->tv.brightness;
} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 223ff2666c3c..98bfbaf29273 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,14 +1690,14 @@ int drm_mode_create_tv_properties(struct drm_device
*dev,
if (drm_mode_create_tv_margin_properties(dev))
goto nomem;
- dev->mode_config.tv_mode_property +
dev->mode_config.legacy_tv_mode_property drm_property_create(dev,
DRM_MODE_PROP_ENUM,
"mode", num_modes);
- if (!dev->mode_config.tv_mode_property)
+ if (!dev->mode_config.legacy_tv_mode_property)
goto nomem;
for (i = 0; i < num_modes; i++)
- drm_property_add_enum(dev->mode_config.tv_mode_property,
+ drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
i, modes[i]);
dev->mode_config.tv_brightness_property diff --git
a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index fa636206f232..86e992b2108b 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -303,7 +303,7 @@ static int gud_connector_atomic_check(struct drm_connector
*connector,
old_state->tv.margins.right != new_state->tv.margins.right ||
old_state->tv.margins.top != new_state->tv.margins.top ||
old_state->tv.margins.bottom != new_state->tv.margins.bottom ||
- old_state->tv.mode != new_state->tv.mode ||
+ old_state->tv.legacy_mode != new_state->tv.legacy_mode ||
old_state->tv.brightness != new_state->tv.brightness ||
old_state->tv.contrast != new_state->tv.contrast ||
old_state->tv.flicker_reduction != new_state->tv.flicker_reduction
||
@@ -424,7 +424,7 @@ gud_connector_property_lookup(struct drm_connector
*connector, u16 prop)
case GUD_PROPERTY_TV_BOTTOM_MARGIN:
return config->tv_bottom_margin_property;
case GUD_PROPERTY_TV_MODE:
- return config->tv_mode_property;
+ return config->legacy_tv_mode_property;
case GUD_PROPERTY_TV_BRIGHTNESS:
return config->tv_brightness_property;
case GUD_PROPERTY_TV_CONTRAST:
@@ -454,7 +454,7 @@ static unsigned int *gud_connector_tv_state_val(u16 prop,
struct drm_tv_connecto
case GUD_PROPERTY_TV_BOTTOM_MARGIN:
return &state->margins.bottom;
case GUD_PROPERTY_TV_MODE:
- return &state->mode;
+ return &state->legacy_mode;
case GUD_PROPERTY_TV_BRIGHTNESS:
return &state->brightness;
case GUD_PROPERTY_TV_CONTRAST:
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index 578b738859b9..ef69f9bdeace 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -264,7 +264,7 @@ static int ch7006_encoder_create_resources(struct
drm_encoder *encoder,
priv->hmargin);
drm_object_attach_property(&connector->base,
conf->tv_bottom_margin_property,
priv->vmargin);
- drm_object_attach_property(&connector->base, conf->tv_mode_property,
+ drm_object_attach_property(&connector->base,
conf->legacy_tv_mode_property,
priv->norm);
drm_object_attach_property(&connector->base,
conf->tv_brightness_property,
priv->brightness);
@@ -315,7 +315,7 @@ static int ch7006_encoder_set_property(struct drm_encoder
*encoder,
ch7006_load_reg(client, state, CH7006_POV);
ch7006_load_reg(client, state, CH7006_VPOS);
- } else if (property == conf->tv_mode_property) {
+ } else if (property == conf->legacy_tv_mode_property) {
if (connector->dpms != DRM_MODE_DPMS_OFF)
return -EINVAL;
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c
b/drivers/gpu/drm/i915/display/intel_tv.c
index dcf89d701f0f..b2f42bf929e2 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1997,7 +1997,8 @@ intel_tv_init(struct drm_i915_private *dev_priv)
}
drm_mode_create_tv_properties(dev, i, tv_format_names);
- drm_object_attach_property(&connector->base,
dev->mode_config.tv_mode_property,
+ drm_object_attach_property(&connector->base,
+ dev->mode_config.legacy_tv_mode_property,
state->tv.mode);
drm_object_attach_property(&connector->base,
dev->mode_config.tv_left_margin_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index be28e7bd7490..1a15534adc60 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -662,7 +662,7 @@ static int nv17_tv_create_resources(struct drm_encoder
*encoder,
conf->tv_subconnector_property,
tv_enc->subconnector);
drm_object_attach_property(&connector->base,
- conf->tv_mode_property,
+ conf->legacy_tv_mode_property,
tv_enc->tv_norm);
drm_object_attach_property(&connector->base,
conf->tv_flicker_reduction_property,
@@ -722,7 +722,7 @@ static int nv17_tv_set_property(struct drm_encoder *encoder,
if (encoder->crtc)
nv17_tv_update_rescaler(encoder);
- } else if (property == conf->tv_mode_property) {
+ } else if (property == conf->legacy_tv_mode_property) {
if (connector->dpms != DRM_MODE_DPMS_OFF)
return -EINVAL;
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 92c07e31d632..e6043cf5d40e 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -274,7 +274,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector
*connector)
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev,
- vc4_vec_tv_modes[state->tv.mode].mode);
+ vc4_vec_tv_modes[state->tv.legacy_mode].mode);
if (!mode) {
DRM_ERROR("Failed to create a new display mode\n");
return -ENOMEM;
@@ -312,7 +312,7 @@ static int vc4_vec_connector_init(struct drm_device *dev,
struct vc4_vec *vec)
drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
drm_object_attach_property(&connector->base,
- dev->mode_config.tv_mode_property,
+ dev->mode_config.legacy_tv_mode_property,
VC4_VEC_TV_MODE_NTSC);
drm_connector_attach_encoder(connector, &vec->encoder.base);
@@ -361,7 +361,7 @@ static void vc4_vec_encoder_enable(struct drm_encoder
*encoder,
struct drm_connector_state *conn_state
drm_atomic_get_new_connector_state(state, connector);
const struct vc4_vec_tv_mode *tv_mode -
&vc4_vec_tv_modes[conn_state->tv.mode];
+ &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
int idx, ret;
if (!drm_dev_enter(drm, &idx))
@@ -449,7 +449,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder
*encoder,
{
const struct vc4_vec_tv_mode *vec_mode;
- vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode];
+ vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
if (conn_state->crtc &&
!drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index e641a4725f99..f18c2ba113d7 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -695,7 +695,7 @@ struct drm_connector_tv_margins {
* @select_subconnector: selected subconnector
* @subconnector: detected subconnector
* @margins: TV margins
- * @mode: TV mode
+ * @legacy_mode: Legacy TV mode, driver specific value
* @brightness: brightness in percent
* @contrast: contrast in percent
* @flicker_reduction: flicker reduction in percent
@@ -707,7 +707,7 @@ struct drm_tv_connector_state {
enum drm_mode_subconnector select_subconnector;
enum drm_mode_subconnector subconnector;
struct drm_connector_tv_margins margins;
- unsigned int mode;
+ unsigned int legacy_mode;
unsigned int brightness;
unsigned int contrast;
unsigned int flicker_reduction;
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 5362702fffe1..c47b29e80108 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -712,11 +712,13 @@ struct drm_mode_config {
* between different TV connector types.
*/
struct drm_property *tv_select_subconnector_property;
+
/**
- * @tv_mode_property: Optional TV property to select
+ * @legacy_tv_mode_property: Optional TV property to select
* the output TV mode.
*/
- struct drm_property *tv_mode_property;
+ struct drm_property *legacy_tv_mode_property;
+
/**
* @tv_left_margin_property: Optional TV property to set the left
* margin (expressed in pixels).
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 03/23] drm/connector: Only register TV mode property if present
The drm_create_tv_properties() will create the TV mode property
unconditionally.
However, since we'll gradually phase it out, let's register it only if
we
have a list passed as an argument. This will make the transition easier.
Acked-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
drivers/gpu/drm/drm_connector.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 98bfbaf29273..6e9e2f96f3a8 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1690,15 +1690,18 @@ int drm_mode_create_tv_properties(struct drm_device
*dev,
if (drm_mode_create_tv_margin_properties(dev))
goto nomem;
- dev->mode_config.legacy_tv_mode_property - drm_property_create(dev,
DRM_MODE_PROP_ENUM,
- "mode", num_modes);
- if (!dev->mode_config.legacy_tv_mode_property)
- goto nomem;
- for (i = 0; i < num_modes; i++)
- drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
- i, modes[i]);
+ if (num_modes) {
+ dev->mode_config.legacy_tv_mode_property + drm_property_create(dev,
DRM_MODE_PROP_ENUM,
+ "mode", num_modes);
+ if (!dev->mode_config.legacy_tv_mode_property)
+ goto nomem;
+
+ for (i = 0; i < num_modes; i++)
+ drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
+ i, modes[i]);
+ }
dev->mode_config.tv_brightness_property drm_property_create_range(dev,
0, "brightness", 0, 100);
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 04/23] drm/connector: Rename drm_mode_create_tv_properties
drm_mode_create_tv_properties(), among other things, will create the
"mode" property that stores the analog TV mode that connector is
supposed to output.
However, that property is getting deprecated, so let's rename that
function to mention it's deprecated. We'll introduce a new variant of
that function creating the property superseeding it in a later patch.
Reviewed-by: Lyude Paul <lyude at redhat.com> # nouveau
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
drivers/gpu/drm/drm_connector.c | 12 ++++++------
drivers/gpu/drm/gud/gud_connector.c | 4 ++--
drivers/gpu/drm/i2c/ch7006_drv.c | 2 +-
drivers/gpu/drm/i915/display/intel_tv.c | 2 +-
drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 2 +-
drivers/gpu/drm/vc4/vc4_vec.c | 5 +++--
include/drm/drm_connector.h | 6 +++---
7 files changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 6e9e2f96f3a8..cd01850c66f7 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1604,7 +1604,7 @@ EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties);
* Called by a driver's HDMI connector initialization routine, this
function
* creates the TV margin properties for a given device. No need to call this
* function for an SDTV connector, it's already called from
- * drm_mode_create_tv_properties().
+ * drm_mode_create_tv_properties_legacy().
*
* Returns:
* 0 on success or a negative error code on failure.
@@ -1639,7 +1639,7 @@ int drm_mode_create_tv_margin_properties(struct drm_device
*dev)
EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
/**
- * drm_mode_create_tv_properties - create TV specific connector properties
+ * drm_mode_create_tv_properties_legacy - create TV specific connector
properties
* @dev: DRM device
* @num_modes: number of different TV formats (modes) supported
* @modes: array of pointers to strings containing name of each format
@@ -1652,9 +1652,9 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
* Returns:
* 0 on success or a negative error code on failure.
*/
-int drm_mode_create_tv_properties(struct drm_device *dev,
- unsigned int num_modes,
- const char * const modes[])
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+ unsigned int num_modes,
+ const char * const modes[])
{
struct drm_property *tv_selector;
struct drm_property *tv_subconnector;
@@ -1737,7 +1737,7 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
nomem:
return -ENOMEM;
}
-EXPORT_SYMBOL(drm_mode_create_tv_properties);
+EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
/**
* drm_mode_create_scaling_mode_property - create scaling mode property
diff --git a/drivers/gpu/drm/gud/gud_connector.c
b/drivers/gpu/drm/gud/gud_connector.c
index 86e992b2108b..034e78360d4f 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -400,7 +400,7 @@ static int gud_connector_add_tv_mode(struct gud_device
*gdrm, struct drm_connect
for (i = 0; i < num_modes; i++)
modes[i] = &buf[i * GUD_CONNECTOR_TV_MODE_NAME_LEN];
- ret = drm_mode_create_tv_properties(connector->dev, num_modes, modes);
+ ret = drm_mode_create_tv_properties_legacy(connector->dev, num_modes,
modes);
free:
kfree(buf);
if (ret < 0)
@@ -539,7 +539,7 @@ static int gud_connector_add_properties(struct gud_device
*gdrm, struct gud_conn
fallthrough;
case GUD_PROPERTY_TV_HUE:
/* This is a no-op if already added. */
- ret = drm_mode_create_tv_properties(drm, 0, NULL);
+ ret = drm_mode_create_tv_properties_legacy(drm, 0, NULL);
if (ret)
goto out;
break;
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index ef69f9bdeace..b63bad04b09d 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -250,7 +250,7 @@ static int ch7006_encoder_create_resources(struct
drm_encoder *encoder,
struct drm_device *dev = encoder->dev;
struct drm_mode_config *conf = &dev->mode_config;
- drm_mode_create_tv_properties(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
+ drm_mode_create_tv_properties_legacy(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
priv->scale_property = drm_property_create_range(dev, 0, "scale",
0, 2);
if (!priv->scale_property)
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c
b/drivers/gpu/drm/i915/display/intel_tv.c
index b2f42bf929e2..748821ebdf65 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1995,7 +1995,7 @@ intel_tv_init(struct drm_i915_private *dev_priv)
tv_format_names[i] = tv_modes[i].name;
}
- drm_mode_create_tv_properties(dev, i, tv_format_names);
+ drm_mode_create_tv_properties_legacy(dev, i, tv_format_names);
drm_object_attach_property(&connector->base,
dev->mode_config.legacy_tv_mode_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index 1a15534adc60..e5480dab55e3 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -653,7 +653,7 @@ static int nv17_tv_create_resources(struct drm_encoder
*encoder,
tv_enc->tv_norm = i;
}
- drm_mode_create_tv_properties(dev, num_tv_norms, nv17_tv_norm_names);
+ drm_mode_create_tv_properties_legacy(dev, num_tv_norms, nv17_tv_norm_names);
drm_object_attach_property(&connector->base,
conf->tv_select_subconnector_property,
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index e6043cf5d40e..adc9bf99e3fd 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -514,8 +514,9 @@ static int vc4_vec_bind(struct device *dev, struct device
*master, void *data)
struct vc4_vec *vec;
int ret;
- ret = drm_mode_create_tv_properties(drm, ARRAY_SIZE(tv_mode_names),
- tv_mode_names);
+ ret = drm_mode_create_tv_properties_legacy(drm,
+ ARRAY_SIZE(tv_mode_names),
+ tv_mode_names);
if (ret)
return ret;
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index f18c2ba113d7..5913b8415137 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1807,9 +1807,9 @@ int drm_mode_create_dvi_i_properties(struct drm_device
*dev);
void drm_connector_attach_dp_subconnector_property(struct drm_connector
*connector);
int drm_mode_create_tv_margin_properties(struct drm_device *dev);
-int drm_mode_create_tv_properties(struct drm_device *dev,
- unsigned int num_modes,
- const char * const modes[]);
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+ unsigned int num_modes,
+ const char * const modes[]);
void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
int drm_mode_create_scaling_mode_property(struct drm_device *dev);
int drm_connector_attach_content_type_property(struct drm_connector *dev);
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 05/23] drm/connector: Add TV standard property
The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.
Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.
Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.
We'll then be able to phase out the older tv mode property.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v5:
- Create an analog TV properties documentation section, and document TV
Mode there instead of the csv file
Changes in v4:
- Add property documentation to kms-properties.csv
- Fix documentation
---
Documentation/gpu/drm-kms.rst | 6 ++
drivers/gpu/drm/drm_atomic_uapi.c | 4 ++
drivers/gpu/drm/drm_connector.c | 122 +++++++++++++++++++++++++++++++++++++-
include/drm/drm_connector.h | 64 ++++++++++++++++++++
include/drm/drm_mode_config.h | 8 +++
5 files changed, 203 insertions(+), 1 deletion(-)
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index b4377a545425..321f2f582c64 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -520,6 +520,12 @@ HDMI Specific Connector Properties
.. kernel-doc:: drivers/gpu/drm/drm_connector.c
:doc: HDMI connector properties
+Analog TV Specific Connector Properties
+----------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+ :doc: Analog TV Connector Properties
+
Standard CRTC Properties
------------------------
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c
b/drivers/gpu/drm/drm_atomic_uapi.c
index 7f2b9a07fbdf..d867e7f9f2cd 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -700,6 +700,8 @@ static int drm_atomic_connector_set_property(struct
drm_connector *connector,
state->tv.margins.bottom = val;
} else if (property == config->legacy_tv_mode_property) {
state->tv.legacy_mode = val;
+ } else if (property == config->tv_mode_property) {
+ state->tv.mode = val;
} else if (property == config->tv_brightness_property) {
state->tv.brightness = val;
} else if (property == config->tv_contrast_property) {
@@ -810,6 +812,8 @@ drm_atomic_connector_get_property(struct drm_connector
*connector,
*val = state->tv.margins.bottom;
} else if (property == config->legacy_tv_mode_property) {
*val = state->tv.legacy_mode;
+ } else if (property == config->tv_mode_property) {
+ *val = state->tv.mode;
} else if (property == config->tv_brightness_property) {
*val = state->tv.brightness;
} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index cd01850c66f7..f9a6cb792bda 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -984,6 +984,17 @@ static const struct drm_prop_enum_list
drm_dvi_i_subconnector_enum_list[] = {
DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
drm_dvi_i_subconnector_enum_list)
+static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
+ { DRM_MODE_TV_MODE_NTSC, "NTSC" },
+ { DRM_MODE_TV_MODE_NTSC_443, "NTSC-443" },
+ { DRM_MODE_TV_MODE_NTSC_J, "NTSC-J" },
+ { DRM_MODE_TV_MODE_PAL, "PAL" },
+ { DRM_MODE_TV_MODE_PAL_M, "PAL-M" },
+ { DRM_MODE_TV_MODE_PAL_N, "PAL-N" },
+ { DRM_MODE_TV_MODE_SECAM, "SECAM" },
+};
+DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
+
static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and
TV-out */
{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
@@ -1552,6 +1563,71 @@
EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property);
* infoframe values is done through drm_hdmi_avi_infoframe_content_type().
*/
+/*
+ * TODO: Document the properties:
+ * - left margin
+ * - right margin
+ * - top margin
+ * - bottom margin
+ * - brightness
+ * - contrast
+ * - flicker reduction
+ * - hue
+ * - mode
+ * - overscan
+ * - saturation
+ * - select subconnector
+ * - subconnector
+ */
+/**
+ * DOC: Analog TV Connector Properties
+ *
+ * TV Mode:
+ * Indicates the TV Mode used on an analog TV connector. The value
+ * of this property can be one of the following:
+ *
+ * NTSC:
+ * TV Mode is CCIR System M (aka 525-lines) together with
+ * the NTSC Color Encoding.
+ *
+ * NTSC-443:
+ *
+ * TV Mode is CCIR System M (aka 525-lines) together with
+ * the NTSC Color Encoding, but with a color subcarrier
+ * frequency of 4.43MHz
+ *
+ * NTSC-J:
+ *
+ * TV Mode is CCIR System M (aka 525-lines) together with
+ * the NTSC Color Encoding, but with a black level equal to
+ * the blanking level.
+ *
+ * PAL:
+ *
+ * TV Mode is CCIR System B (aka 625-lines) together with
+ * the PAL Color Encoding.
+ *
+ * PAL-M:
+ *
+ * TV Mode is CCIR System M (aka 525-lines) together with
+ * the PAL Color Encoding.
+ *
+ * PAL-N:
+ *
+ * TV Mode is CCIR System N together with the PAL Color
+ * Encoding, a color subcarrier frequency of 3.58MHz, the
+ * SECAM color space, and narrower channels than other PAL
+ * variants.
+ *
+ * SECAM:
+ *
+ * TV Mode is CCIR System B (aka 625-lines) together with
+ * the SECAM Color Encoding.
+ *
+ * Drivers can set up this property by calling
+ * drm_mode_create_tv_properties().
+ */
+
/**
* drm_connector_attach_content_type_property - attach content-type property
* @connector: connector to attach content type property on.
@@ -1649,6 +1725,10 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
* responsible for allocating a list of format names and passing them to
* this routine.
*
+ * NOTE: This functions registers the deprecated "mode" connector
+ * property to select the analog TV mode (ie, NTSC, PAL, etc.). New
+ * drivers must use drm_mode_create_tv_properties() instead.
+ *
* Returns:
* 0 on success or a negative error code on failure.
*/
@@ -1690,7 +1770,6 @@ int drm_mode_create_tv_properties_legacy(struct drm_device
*dev,
if (drm_mode_create_tv_margin_properties(dev))
goto nomem;
-
if (num_modes) {
dev->mode_config.legacy_tv_mode_property drm_property_create(dev,
DRM_MODE_PROP_ENUM,
@@ -1739,6 +1818,47 @@ int drm_mode_create_tv_properties_legacy(struct
drm_device *dev,
}
EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
+/**
+ * drm_mode_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @supported_tv_modes: Bitmask of TV modes supported (See DRM_MODE_TV_MODE_*)
+
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev,
+ unsigned int supported_tv_modes)
+{
+ struct drm_prop_enum_list tv_mode_list[DRM_MODE_TV_MODE_MAX];
+ struct drm_property *tv_mode;
+ unsigned int i, len = 0;
+
+ if (dev->mode_config.tv_mode_property)
+ return 0;
+
+ for (i = 0; i < DRM_MODE_TV_MODE_MAX; i++) {
+ if (!(supported_tv_modes & BIT(i)))
+ continue;
+
+ tv_mode_list[len].type = i;
+ tv_mode_list[len].name = drm_get_tv_mode_name(i);
+ len++;
+ }
+
+ tv_mode = drm_property_create_enum(dev, 0, "TV mode",
+ tv_mode_list, len);
+ if (!tv_mode)
+ return -ENOMEM;
+
+ dev->mode_config.tv_mode_property = tv_mode;
+
+ return drm_mode_create_tv_properties_legacy(dev, 0, NULL);
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
/**
* drm_mode_create_scaling_mode_property - create scaling mode property
* @dev: DRM device
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 5913b8415137..9afc7956fdc6 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -143,6 +143,65 @@ enum subpixel_order {
};
+/**
+ * enum drm_connector_tv_mode - Analog TV output mode
+ *
+ * This enum is used to indicate the TV output mode used on an analog TV
+ * connector.
+ *
+ * WARNING: The values of this enum is uABI since they're exposed in the
+ * "TV mode" connector property.
+ */
+enum drm_connector_tv_mode {
+ /**
+ * @DRM_MODE_TV_MODE_NTSC: CCIR System M (aka 525-lines)
+ * together with the NTSC Color Encoding.
+ */
+ DRM_MODE_TV_MODE_NTSC,
+
+ /**
+ * @DRM_MODE_TV_MODE_NTSC_443: Variant of
+ * @DRM_MODE_TV_MODE_NTSC. Uses a color subcarrier frequency
+ * of 4.43 MHz.
+ */
+ DRM_MODE_TV_MODE_NTSC_443,
+
+ /**
+ * @DRM_MODE_TV_MODE_NTSC_J: Variant of @DRM_MODE_TV_MODE_NTSC
+ * used in Japan. Uses a black level equals to the blanking
+ * level.
+ */
+ DRM_MODE_TV_MODE_NTSC_J,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL: CCIR System B together with the PAL
+ * color system.
+ */
+ DRM_MODE_TV_MODE_PAL,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_M: CCIR System M (aka 525-lines)
+ * together with the PAL color encoding
+ */
+ DRM_MODE_TV_MODE_PAL_M,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_N: CCIR System N together with the PAL
+ * color encoding. It uses 625 lines, but has a color subcarrier
+ * frequency of 3.58MHz, the SECAM color space, and narrower
+ * channels compared to most of the other PAL variants.
+ */
+ DRM_MODE_TV_MODE_PAL_N,
+
+ /**
+ * @DRM_MODE_TV_MODE_SECAM: CCIR System B together with the
+ * SECAM color system.
+ */
+ DRM_MODE_TV_MODE_SECAM,
+
+ DRM_MODE_TV_MODE_MAX,
+};
+
/**
* struct drm_scrambling: sink's scrambling support.
*/
@@ -696,6 +755,7 @@ struct drm_connector_tv_margins {
* @subconnector: detected subconnector
* @margins: TV margins
* @legacy_mode: Legacy TV mode, driver specific value
+ * @mode: TV mode
* @brightness: brightness in percent
* @contrast: contrast in percent
* @flicker_reduction: flicker reduction in percent
@@ -708,6 +768,7 @@ struct drm_tv_connector_state {
enum drm_mode_subconnector subconnector;
struct drm_connector_tv_margins margins;
unsigned int legacy_mode;
+ unsigned int mode;
unsigned int brightness;
unsigned int contrast;
unsigned int flicker_reduction;
@@ -1797,6 +1858,7 @@ const char *drm_get_subpixel_order_name(enum
subpixel_order order);
const char *drm_get_dpms_name(int val);
const char *drm_get_dvi_i_subconnector_name(int val);
const char *drm_get_dvi_i_select_name(int val);
+const char *drm_get_tv_mode_name(int val);
const char *drm_get_tv_subconnector_name(int val);
const char *drm_get_tv_select_name(int val);
const char *drm_get_dp_subconnector_name(int val);
@@ -1810,6 +1872,8 @@ int drm_mode_create_tv_margin_properties(struct drm_device
*dev);
int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
unsigned int num_modes,
const char * const modes[]);
+int drm_mode_create_tv_properties(struct drm_device *dev,
+ unsigned int supported_tv_modes);
void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
int drm_mode_create_scaling_mode_property(struct drm_device *dev);
int drm_connector_attach_content_type_property(struct drm_connector *dev);
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index c47b29e80108..1a8bcc3fd14e 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -716,9 +716,17 @@ struct drm_mode_config {
/**
* @legacy_tv_mode_property: Optional TV property to select
* the output TV mode.
+ *
+ * Superseeded by @tv_mode_property
*/
struct drm_property *legacy_tv_mode_property;
+ /**
+ * @tv_mode_property: Optional TV property to select the TV
+ * standard output on the connector.
+ */
+ struct drm_property *tv_mode_property;
+
/**
* @tv_left_margin_property: Optional TV property to set the left
* margin (expressed in pixels).
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 06/23] drm/modes: Add a function to generate analog display modes
Multiple drivers (meson, vc4, sun4i) define analog TV 525-lines and
625-lines modes in their drivers.
Since those modes are fairly standard, and that we'll need to use them
in more places in the future, it makes sense to move their definition
into the core framework.
However, analog display usually have fairly loose timings requirements,
the only discrete parameters being the total number of lines and pixel
clock frequency. Thus, we created a function that will create a display
mode from the standard, the pixel frequency and the active area.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v6:
- Fix typo
Changes in v4:
- Reworded the line length check comment
- Switch to HZ_PER_KHZ in tests
- Use previous timing to fill our mode
- Move the number of lines check earlier
---
drivers/gpu/drm/drm_modes.c | 474 +++++++++++++++++++++++++++++++++
drivers/gpu/drm/tests/Makefile | 1 +
drivers/gpu/drm/tests/drm_modes_test.c | 144 ++++++++++
include/drm/drm_modes.h | 17 ++
4 files changed, 636 insertions(+)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 5d4ac79381c4..71c050c3ee6b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -116,6 +116,480 @@ void drm_mode_probed_add(struct drm_connector *connector,
}
EXPORT_SYMBOL(drm_mode_probed_add);
+enum drm_mode_analog {
+ DRM_MODE_ANALOG_NTSC, /* 525 lines, 60Hz */
+ DRM_MODE_ANALOG_PAL, /* 625 lines, 50Hz */
+};
+
+/*
+ * The timings come from:
+ * -
https://web.archive.org/web/20220406232708/http://www.kolumbus.fi/pami1/video/pal_ntsc.html
+ * -
https://web.archive.org/web/20220406124914/http://martin.hinner.info/vga/pal.html
+ * -
https://web.archive.org/web/20220609202433/http://www.batsocks.co.uk/readme/video_timing.htm
+ */
+#define NTSC_LINE_DURATION_NS 63556U
+#define NTSC_LINES_NUMBER 525
+
+#define NTSC_HBLK_DURATION_TYP_NS 10900U
+#define NTSC_HBLK_DURATION_MIN_NS (NTSC_HBLK_DURATION_TYP_NS - 200)
+#define NTSC_HBLK_DURATION_MAX_NS (NTSC_HBLK_DURATION_TYP_NS + 200)
+
+#define NTSC_HACT_DURATION_TYP_NS (NTSC_LINE_DURATION_NS -
NTSC_HBLK_DURATION_TYP_NS)
+#define NTSC_HACT_DURATION_MIN_NS (NTSC_LINE_DURATION_NS -
NTSC_HBLK_DURATION_MAX_NS)
+#define NTSC_HACT_DURATION_MAX_NS (NTSC_LINE_DURATION_NS -
NTSC_HBLK_DURATION_MIN_NS)
+
+#define NTSC_HFP_DURATION_TYP_NS 1500
+#define NTSC_HFP_DURATION_MIN_NS 1270
+#define NTSC_HFP_DURATION_MAX_NS 2220
+
+#define NTSC_HSLEN_DURATION_TYP_NS 4700
+#define NTSC_HSLEN_DURATION_MIN_NS (NTSC_HSLEN_DURATION_TYP_NS - 100)
+#define NTSC_HSLEN_DURATION_MAX_NS (NTSC_HSLEN_DURATION_TYP_NS + 100)
+
+#define NTSC_HBP_DURATION_TYP_NS 4700
+
+/*
+ * I couldn't find the actual tolerance for the back porch, so let's
+ * just reuse the sync length ones.
+ */
+#define NTSC_HBP_DURATION_MIN_NS (NTSC_HBP_DURATION_TYP_NS - 100)
+#define NTSC_HBP_DURATION_MAX_NS (NTSC_HBP_DURATION_TYP_NS + 100)
+
+#define PAL_LINE_DURATION_NS 64000U
+#define PAL_LINES_NUMBER 625
+
+#define PAL_HACT_DURATION_TYP_NS 51950U
+#define PAL_HACT_DURATION_MIN_NS (PAL_HACT_DURATION_TYP_NS - 100)
+#define PAL_HACT_DURATION_MAX_NS (PAL_HACT_DURATION_TYP_NS + 400)
+
+#define PAL_HBLK_DURATION_TYP_NS (PAL_LINE_DURATION_NS -
PAL_HACT_DURATION_TYP_NS)
+#define PAL_HBLK_DURATION_MIN_NS (PAL_LINE_DURATION_NS -
PAL_HACT_DURATION_MAX_NS)
+#define PAL_HBLK_DURATION_MAX_NS (PAL_LINE_DURATION_NS -
PAL_HACT_DURATION_MIN_NS)
+
+#define PAL_HFP_DURATION_TYP_NS 1650
+#define PAL_HFP_DURATION_MIN_NS (PAL_HFP_DURATION_TYP_NS - 100)
+#define PAL_HFP_DURATION_MAX_NS (PAL_HFP_DURATION_TYP_NS + 400)
+
+#define PAL_HSLEN_DURATION_TYP_NS 4700
+#define PAL_HSLEN_DURATION_MIN_NS (PAL_HSLEN_DURATION_TYP_NS - 200)
+#define PAL_HSLEN_DURATION_MAX_NS (PAL_HSLEN_DURATION_TYP_NS + 200)
+
+#define PAL_HBP_DURATION_TYP_NS 5700
+#define PAL_HBP_DURATION_MIN_NS (PAL_HBP_DURATION_TYP_NS - 200)
+#define PAL_HBP_DURATION_MAX_NS (PAL_HBP_DURATION_TYP_NS + 200)
+
+struct analog_param_field {
+ unsigned int even, odd;
+};
+
+#define PARAM_FIELD(_odd, _even) \
+ { .even = _even, .odd = _odd }
+
+struct analog_param_range {
+ unsigned int min, typ, max;
+};
+
+#define PARAM_RANGE(_min, _typ, _max) \
+ { .min = _min, .typ = _typ, .max = _max }
+
+struct analog_parameters {
+ unsigned int num_lines;
+ unsigned int line_duration_ns;
+
+ struct analog_param_range hact_ns;
+ struct analog_param_range hfp_ns;
+ struct analog_param_range hslen_ns;
+ struct analog_param_range hbp_ns;
+ struct analog_param_range hblk_ns;
+
+ unsigned int bt601_hfp;
+
+ struct analog_param_field vfp_lines;
+ struct analog_param_field vslen_lines;
+ struct analog_param_field vbp_lines;
+};
+
+#define TV_MODE_PARAMETER(_mode, _lines, _line_dur, _hact, _hfp, _hslen, _hbp,
_hblk, _bt601_hfp, _vfp, _vslen, _vbp) \
+ [_mode] = { \
+ .num_lines = _lines, \
+ .line_duration_ns = _line_dur, \
+ .hact_ns = _hact, \
+ .hfp_ns = _hfp, \
+ .hslen_ns = _hslen, \
+ .hbp_ns = _hbp, \
+ .hblk_ns = _hblk, \
+ .bt601_hfp = _bt601_hfp, \
+ .vfp_lines = _vfp, \
+ .vslen_lines = _vslen, \
+ .vbp_lines = _vbp, \
+ }
+
+const static struct analog_parameters tv_modes_parameters[] = {
+ TV_MODE_PARAMETER(DRM_MODE_ANALOG_NTSC,
+ NTSC_LINES_NUMBER,
+ NTSC_LINE_DURATION_NS,
+ PARAM_RANGE(NTSC_HACT_DURATION_MIN_NS,
+ NTSC_HACT_DURATION_TYP_NS,
+ NTSC_HACT_DURATION_MAX_NS),
+ PARAM_RANGE(NTSC_HFP_DURATION_MIN_NS,
+ NTSC_HFP_DURATION_TYP_NS,
+ NTSC_HFP_DURATION_MAX_NS),
+ PARAM_RANGE(NTSC_HSLEN_DURATION_MIN_NS,
+ NTSC_HSLEN_DURATION_TYP_NS,
+ NTSC_HSLEN_DURATION_MAX_NS),
+ PARAM_RANGE(NTSC_HBP_DURATION_MIN_NS,
+ NTSC_HBP_DURATION_TYP_NS,
+ NTSC_HBP_DURATION_MAX_NS),
+ PARAM_RANGE(NTSC_HBLK_DURATION_MIN_NS,
+ NTSC_HBLK_DURATION_TYP_NS,
+ NTSC_HBLK_DURATION_MAX_NS),
+ 16,
+ PARAM_FIELD(3, 3),
+ PARAM_FIELD(3, 3),
+ PARAM_FIELD(16, 17)),
+ TV_MODE_PARAMETER(DRM_MODE_ANALOG_PAL,
+ PAL_LINES_NUMBER,
+ PAL_LINE_DURATION_NS,
+ PARAM_RANGE(PAL_HACT_DURATION_MIN_NS,
+ PAL_HACT_DURATION_TYP_NS,
+ PAL_HACT_DURATION_MAX_NS),
+ PARAM_RANGE(PAL_HFP_DURATION_MIN_NS,
+ PAL_HFP_DURATION_TYP_NS,
+ PAL_HFP_DURATION_MAX_NS),
+ PARAM_RANGE(PAL_HSLEN_DURATION_MIN_NS,
+ PAL_HSLEN_DURATION_TYP_NS,
+ PAL_HSLEN_DURATION_MAX_NS),
+ PARAM_RANGE(PAL_HBP_DURATION_MIN_NS,
+ PAL_HBP_DURATION_TYP_NS,
+ PAL_HBP_DURATION_MAX_NS),
+ PARAM_RANGE(PAL_HBLK_DURATION_MIN_NS,
+ PAL_HBLK_DURATION_TYP_NS,
+ PAL_HBLK_DURATION_MAX_NS),
+ 12,
+
+ /*
+ * The front porch is actually 6 short sync
+ * pulses for the even field, and 5 for the
+ * odd field. Each sync takes half a life so
+ * the odd field front porch is shorter by
+ * half a line.
+ *
+ * In progressive, we're supposed to use 6
+ * pulses, so we're fine there
+ */
+ PARAM_FIELD(3, 2),
+
+ /*
+ * The vsync length is 5 long sync pulses,
+ * each field taking half a line. We're
+ * shorter for both fields by half a line.
+ *
+ * In progressive, we're supposed to use 5
+ * pulses, so we're off by half
+ * a line.
+ *
+ * In interlace, we're now off by half a line
+ * for the even field and one line for the odd
+ * field.
+ */
+ PARAM_FIELD(3, 3),
+
+ /*
+ * The back porch starts with post-equalizing
+ * pulses, consisting in 5 short sync pulses
+ * for the even field, 4 for the odd field. In
+ * progressive, it's 5 short syncs.
+ *
+ * In progressive, we thus have 2.5 lines,
+ * plus the 0.5 line we were missing
+ * previously, so we should use 3 lines.
+ *
+ * In interlace, the even field is in the
+ * exact same case than progressive. For the
+ * odd field, we should be using 2 lines but
+ * we're one line short, so we'll make up for
+ * it here by using 3.
+ *
+ * The entire blanking area is supposed to
+ * take 25 lines, so we also need to account
+ * for the rest of the blanking area that
+ * can't be in either the front porch or sync
+ * period.
+ */
+ PARAM_FIELD(19, 20)),
+};
+
+static int fill_analog_mode(struct drm_device *dev,
+ struct drm_display_mode *mode,
+ const struct analog_parameters *params,
+ unsigned long pixel_clock_hz,
+ unsigned int hactive,
+ unsigned int vactive,
+ bool interlace)
+{
+ unsigned long pixel_duration_ns = NSEC_PER_SEC / pixel_clock_hz;
+ unsigned int htotal, vtotal;
+ unsigned int max_hact, hact_duration_ns;
+ unsigned int hblk, hblk_duration_ns;
+ unsigned int hfp, hfp_duration_ns;
+ unsigned int hslen, hslen_duration_ns;
+ unsigned int hbp, hbp_duration_ns;
+ unsigned int porches, porches_duration_ns;
+ unsigned int vfp, vfp_min;
+ unsigned int vbp, vbp_min;
+ unsigned int vslen;
+ bool bt601 = false;
+ int porches_rem;
+ u64 result;
+
+ drm_dbg_kms(dev,
+ "Generating a %ux%u%c, %u-line mode with a %lu kHz clock\n",
+ hactive, vactive,
+ interlace ? 'i' : 'p',
+ params->num_lines,
+ pixel_clock_hz / 1000);
+
+ max_hact = params->hact_ns.max / pixel_duration_ns;
+ if (pixel_clock_hz == 13500000 && hactive > max_hact &&
hactive <= 720) {
+ drm_dbg_kms(dev, "Trying to generate a BT.601 mode. Disabling
checks.\n");
+ bt601 = true;
+ }
+
+ /*
+ * Our pixel duration is going to be round down by the division,
+ * so rounding up is probably going to introduce even more
+ * deviation.
+ */
+ result = (u64)params->line_duration_ns * pixel_clock_hz;
+ do_div(result, NSEC_PER_SEC);
+ htotal = result;
+
+ drm_dbg_kms(dev, "Total Horizontal Number of Pixels: %u\n", htotal);
+
+ hact_duration_ns = hactive * pixel_duration_ns;
+ if (!bt601 &&
+ (hact_duration_ns < params->hact_ns.min ||
+ hact_duration_ns > params->hact_ns.max)) {
+ DRM_ERROR("Invalid horizontal active area duration: %uns (min: %u, max
%u)\n",
+ hact_duration_ns, params->hact_ns.min, params->hact_ns.max);
+ return -EINVAL;
+ }
+
+ hblk = htotal - hactive;
+ drm_dbg_kms(dev, "Horizontal Blanking Period: %u\n", hblk);
+
+ hblk_duration_ns = hblk * pixel_duration_ns;
+ if (!bt601 &&
+ (hblk_duration_ns < params->hblk_ns.min ||
+ hblk_duration_ns > params->hblk_ns.max)) {
+ DRM_ERROR("Invalid horizontal blanking duration: %uns (min: %u, max
%u)\n",
+ hblk_duration_ns, params->hblk_ns.min, params->hblk_ns.max);
+ return -EINVAL;
+ }
+
+ hslen = DIV_ROUND_UP(params->hslen_ns.typ, pixel_duration_ns);
+ drm_dbg_kms(dev, "Horizontal Sync Period: %u\n", hslen);
+
+ hslen_duration_ns = hslen * pixel_duration_ns;
+ if (!bt601 &&
+ (hslen_duration_ns < params->hslen_ns.min ||
+ hslen_duration_ns > params->hslen_ns.max)) {
+ DRM_ERROR("Invalid horizontal sync duration: %uns (min: %u, max
%u)\n",
+ hslen_duration_ns, params->hslen_ns.min, params->hslen_ns.max);
+ return -EINVAL;
+ }
+
+ porches = hblk - hslen;
+ drm_dbg_kms(dev, "Remaining horizontal pixels for both porches:
%u\n", porches);
+
+ porches_duration_ns = porches * pixel_duration_ns;
+ if (!bt601 &&
+ (porches_duration_ns > (params->hfp_ns.max + params->hbp_ns.max)
||
+ porches_duration_ns < (params->hfp_ns.min +
params->hbp_ns.min))) {
+ DRM_ERROR("Invalid horizontal porches duration: %uns\n",
porches_duration_ns);
+ return -EINVAL;
+ }
+
+ if (bt601) {
+ hfp = params->bt601_hfp;
+ } else {
+ unsigned int hfp_min = DIV_ROUND_UP(params->hfp_ns.min,
+ pixel_duration_ns);
+ unsigned int hbp_min = DIV_ROUND_UP(params->hbp_ns.min,
+ pixel_duration_ns);
+ int porches_rem = porches - hfp_min - hbp_min;
+
+ hfp = hfp_min + DIV_ROUND_UP(porches_rem, 2);
+ }
+
+ drm_dbg_kms(dev, "Horizontal Front Porch: %u\n", hfp);
+
+ hfp_duration_ns = hfp * pixel_duration_ns;
+ if (!bt601 &&
+ (hfp_duration_ns < params->hfp_ns.min ||
+ hfp_duration_ns > params->hfp_ns.max)) {
+ DRM_ERROR("Invalid horizontal front porch duration: %uns (min: %u, max
%u)\n",
+ hfp_duration_ns, params->hfp_ns.min, params->hfp_ns.max);
+ return -EINVAL;
+ }
+
+ hbp = porches - hfp;
+ drm_dbg_kms(dev, "Horizontal Back Porch: %u\n", hbp);
+
+ hbp_duration_ns = hbp * pixel_duration_ns;
+ if (!bt601 &&
+ (hbp_duration_ns < params->hbp_ns.min ||
+ hbp_duration_ns > params->hbp_ns.max)) {
+ DRM_ERROR("Invalid horizontal back porch duration: %uns (min: %u, max
%u)\n",
+ hbp_duration_ns, params->hbp_ns.min, params->hbp_ns.max);
+ return -EINVAL;
+ }
+
+ if (htotal != (hactive + hfp + hslen + hbp))
+ return -EINVAL;
+
+ mode->clock = pixel_clock_hz / 1000;
+ mode->hdisplay = hactive;
+ mode->hsync_start = mode->hdisplay + hfp;
+ mode->hsync_end = mode->hsync_start + hslen;
+ mode->htotal = mode->hsync_end + hbp;
+
+ if (interlace) {
+ vfp_min = params->vfp_lines.even + params->vfp_lines.odd;
+ vbp_min = params->vbp_lines.even + params->vbp_lines.odd;
+ vslen = params->vslen_lines.even + params->vslen_lines.odd;
+ } else {
+ /*
+ * By convention, NTSC (aka 525/60) systems start with
+ * the even field, but PAL (aka 625/50) systems start
+ * with the odd one.
+ *
+ * PAL systems also have asymetric timings between the
+ * even and odd field, while NTSC is symetric.
+ *
+ * Moreover, if we want to create a progressive mode for
+ * PAL, we need to use the odd field timings.
+ *
+ * Since odd == even for NTSC, we can just use the odd
+ * one all the time to simplify the code a bit.
+ */
+ vfp_min = params->vfp_lines.odd;
+ vbp_min = params->vbp_lines.odd;
+ vslen = params->vslen_lines.odd;
+ }
+
+ drm_dbg_kms(dev, "Vertical Sync Period: %u\n", vslen);
+
+ porches = params->num_lines - vactive - vslen;
+ drm_dbg_kms(dev, "Remaining vertical pixels for both porches: %u\n",
porches);
+
+ porches_rem = porches - vfp_min - vbp_min;
+ vfp = vfp_min + (porches_rem / 2);
+ drm_dbg_kms(dev, "Vertical Front Porch: %u\n", vfp);
+
+ vbp = porches - vfp;
+ drm_dbg_kms(dev, "Vertical Back Porch: %u\n", vbp);
+
+ vtotal = vactive + vfp + vslen + vbp;
+ if (params->num_lines != vtotal) {
+ DRM_ERROR("Invalid vertical total: %upx (expected %upx)\n",
+ vtotal, params->num_lines);
+ return -EINVAL;
+ }
+
+ mode->vdisplay = vactive;
+ mode->vsync_start = mode->vdisplay + vfp;
+ mode->vsync_end = mode->vsync_start + vslen;
+ mode->vtotal = mode->vsync_end + vbp;
+
+ if (mode->vtotal != params->num_lines)
+ return -EINVAL;
+
+ mode->type = DRM_MODE_TYPE_DRIVER;
+ mode->flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC;
+ if (interlace)
+ mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+ drm_mode_set_name(mode);
+
+ drm_dbg_kms(dev, "Generated mode " DRM_MODE_FMT "\n",
DRM_MODE_ARG(mode));
+
+ return 0;
+}
+
+/**
+ * drm_analog_tv_mode - create a display mode for an analog TV
+ * @dev: drm device
+ * @tv_mode: TV Mode standard to create a mode for. See DRM_MODE_TV_MODE_*.
+ * @pixel_clock_hz: Pixel Clock Frequency, in Hertz
+ * @hdisplay: hdisplay size
+ * @vdisplay: vdisplay size
+ * @interlace: whether to compute an interlaced mode
+ *
+ * This function creates a struct drm_display_mode instance suited for
+ * an analog TV output, for one of the usual analog TV mode.
+ *
+ * Note that @hdisplay is larger than the usual constraints for the PAL
+ * and NTSC timings, and we'll choose to ignore most timings constraints
+ * to reach those resolutions.
+ *
+ * Returns:
+ *
+ * A pointer to the mode, allocated with drm_mode_create(). Returns NULL
+ * on error.
+ */
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+ enum drm_connector_tv_mode tv_mode,
+ unsigned long pixel_clock_hz,
+ unsigned int hdisplay,
+ unsigned int vdisplay,
+ bool interlace)
+{
+ struct drm_display_mode *mode;
+ enum drm_mode_analog analog;
+ int ret;
+
+ switch (tv_mode) {
+ case DRM_MODE_TV_MODE_NTSC:
+ fallthrough;
+ case DRM_MODE_TV_MODE_NTSC_443:
+ fallthrough;
+ case DRM_MODE_TV_MODE_NTSC_J:
+ fallthrough;
+ case DRM_MODE_TV_MODE_PAL_M:
+ analog = DRM_MODE_ANALOG_NTSC;
+ break;
+
+ case DRM_MODE_TV_MODE_PAL:
+ fallthrough;
+ case DRM_MODE_TV_MODE_PAL_N:
+ fallthrough;
+ case DRM_MODE_TV_MODE_SECAM:
+ analog = DRM_MODE_ANALOG_PAL;
+ break;
+
+ default:
+ return NULL;
+ }
+
+ mode = drm_mode_create(dev);
+ if (!mode)
+ return NULL;
+
+ ret = fill_analog_mode(dev, mode,
+ &tv_modes_parameters[analog],
+ pixel_clock_hz, hdisplay, vdisplay, interlace);
+ if (ret)
+ goto err_free_mode;
+
+ return mode;
+
+err_free_mode:
+ drm_mode_destroy(dev, mode);
+ return NULL;
+}
+EXPORT_SYMBOL(drm_analog_tv_mode);
+
/**
* drm_cvt_mode -create a modeline based on the CVT algorithm
* @dev: drm device
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b29ef1085cad..b22ac96fdd65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -10,5 +10,6 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
drm_framebuffer_test.o \
drm_kunit_helpers.o \
drm_mm_test.o \
+ drm_modes_test.o \
drm_plane_helper_test.o \
drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_modes_test.c
b/drivers/gpu/drm/tests/drm_modes_test.c
new file mode 100644
index 000000000000..550e3b95453e
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_modes_test.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_modes.h>
+
+#include <kunit/test.h>
+
+#include <linux/units.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_modes_test_priv {
+ struct drm_device *drm;
+};
+
+static int drm_modes_test_init(struct kunit *test)
+{
+ struct drm_modes_test_priv *priv;
+
+ priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ priv->drm = drm_kunit_device_init(test, "drm-modes-test");
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+ test->priv = priv;
+
+ return 0;
+}
+
+static void drm_modes_analog_tv_ntsc_480i(struct kunit *test)
+{
+ struct drm_modes_test_priv *priv = test->priv;
+ struct drm_display_mode *mode;
+
+ mode = drm_analog_tv_mode(priv->drm,
+ DRM_MODE_TV_MODE_NTSC,
+ 13500 * HZ_PER_KHZ, 720, 480,
+ true);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 60);
+ KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+ /* BT.601 defines hsync_start at 736 for 480i */
+ KUNIT_EXPECT_EQ(test, mode->hsync_start, 736);
+
+ /*
+ * The NTSC standard expects a line to take 63.556us. With a
+ * pixel clock of 13.5 MHz, a pixel takes around 74ns, so we
+ * need to have 63556ns / 74ns = 858.
+ *
+ * This is also mandated by BT.601.
+ */
+ KUNIT_EXPECT_EQ(test, mode->htotal, 858);
+
+ KUNIT_EXPECT_EQ(test, mode->vdisplay, 480);
+ KUNIT_EXPECT_EQ(test, mode->vtotal, 525);
+}
+
+static void drm_modes_analog_tv_ntsc_480i_inlined(struct kunit *test)
+{
+ struct drm_modes_test_priv *priv = test->priv;
+ struct drm_display_mode *expected, *mode;
+
+ expected = drm_analog_tv_mode(priv->drm,
+ DRM_MODE_TV_MODE_NTSC,
+ 13500 * HZ_PER_KHZ, 720, 480,
+ true);
+ KUNIT_ASSERT_NOT_NULL(test, expected);
+
+ mode = drm_mode_analog_ntsc_480i(priv->drm);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static void drm_modes_analog_tv_pal_576i(struct kunit *test)
+{
+ struct drm_modes_test_priv *priv = test->priv;
+ struct drm_display_mode *mode;
+
+ mode = drm_analog_tv_mode(priv->drm,
+ DRM_MODE_TV_MODE_PAL,
+ 13500 * HZ_PER_KHZ, 720, 576,
+ true);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 50);
+ KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+ /* BT.601 defines hsync_start at 732 for 576i */
+ KUNIT_EXPECT_EQ(test, mode->hsync_start, 732);
+
+ /*
+ * The PAL standard expects a line to take 64us. With a pixel
+ * clock of 13.5 MHz, a pixel takes around 74ns, so we need to
+ * have 64000ns / 74ns = 864.
+ *
+ * This is also mandated by BT.601.
+ */
+ KUNIT_EXPECT_EQ(test, mode->htotal, 864);
+
+ KUNIT_EXPECT_EQ(test, mode->vdisplay, 576);
+ KUNIT_EXPECT_EQ(test, mode->vtotal, 625);
+}
+
+static void drm_modes_analog_tv_pal_576i_inlined(struct kunit *test)
+{
+ struct drm_modes_test_priv *priv = test->priv;
+ struct drm_display_mode *expected, *mode;
+
+ expected = drm_analog_tv_mode(priv->drm,
+ DRM_MODE_TV_MODE_PAL,
+ 13500 * HZ_PER_KHZ, 720, 576,
+ true);
+ KUNIT_ASSERT_NOT_NULL(test, expected);
+
+ mode = drm_mode_analog_pal_576i(priv->drm);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static struct kunit_case drm_modes_analog_tv_tests[] = {
+ KUNIT_CASE(drm_modes_analog_tv_ntsc_480i),
+ KUNIT_CASE(drm_modes_analog_tv_ntsc_480i_inlined),
+ KUNIT_CASE(drm_modes_analog_tv_pal_576i),
+ KUNIT_CASE(drm_modes_analog_tv_pal_576i_inlined),
+ { }
+};
+
+static struct kunit_suite drm_modes_analog_tv_test_suite = {
+ .name = "drm_modes_analog_tv",
+ .init = drm_modes_test_init,
+ .test_cases = drm_modes_analog_tv_tests,
+};
+
+kunit_test_suites(
+ &drm_modes_analog_tv_test_suite
+);
+MODULE_LICENSE("GPL v2");
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index b0c680e6f670..c613f0abe9dc 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -468,6 +468,23 @@ bool drm_mode_is_420_also(const struct drm_display_info
*display,
bool drm_mode_is_420(const struct drm_display_info *display,
const struct drm_display_mode *mode);
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+ enum drm_connector_tv_mode mode,
+ unsigned long pixel_clock_hz,
+ unsigned int hdisplay,
+ unsigned int vdisplay,
+ bool interlace);
+
+static inline struct drm_display_mode *drm_mode_analog_ntsc_480i(struct
drm_device *dev)
+{
+ return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_NTSC, 13500000, 720, 480,
true);
+}
+
+static inline struct drm_display_mode *drm_mode_analog_pal_576i(struct
drm_device *dev)
+{
+ return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_PAL, 13500000, 720, 576,
true);
+}
+
struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
int hdisplay, int vdisplay, int vrefresh,
bool reduced, bool interlaced,
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 07/23] drm/client: Add some tests for drm_connector_pick_cmdline_mode()
drm_connector_pick_cmdline_mode() is in charge of finding a proper
drm_display_mode from the definition we got in the video= command line
argument.
Let's add some unit tests to make sure we're not getting any regressions
there.
Acked-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v6:
- Rename tests to be consistent with DRM tests naming convention
Changes in v5:
- Removed useless (for now) count and modes intermediate variables in
get_modes
- Switched to kunit assertions in test init, and to KUNIT_ASSERT_NOT_NULL
instead of KUNIT_ASSERT_PTR_NE(..., NULL)
Changes in v4:
- Removed MODULE macros
---
drivers/gpu/drm/drm_client_modeset.c | 4 +
drivers/gpu/drm/tests/drm_client_modeset_test.c | 100 ++++++++++++++++++++++++
2 files changed, 104 insertions(+)
diff --git a/drivers/gpu/drm/drm_client_modeset.c
b/drivers/gpu/drm/drm_client_modeset.c
index bbc535cc50dd..d553e793e673 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -1237,3 +1237,7 @@ int drm_client_modeset_dpms(struct drm_client_dev *client,
int mode)
return ret;
}
EXPORT_SYMBOL(drm_client_modeset_dpms);
+
+#ifdef CONFIG_DRM_KUNIT_TEST
+#include "tests/drm_client_modeset_test.c"
+#endif
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c
b/drivers/gpu/drm/tests/drm_client_modeset_test.c
new file mode 100644
index 000000000000..3aa1acfe75df
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Maxime Ripard <mripard at kernel.org>
+ */
+
+#include <kunit/test.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_client_modeset_test_priv {
+ struct drm_device *drm;
+ struct drm_connector connector;
+};
+
+static int drm_client_modeset_connector_get_modes(struct drm_connector
*connector)
+{
+ return drm_add_modes_noedid(connector, 1920, 1200);
+}
+
+static const struct drm_connector_helper_funcs
drm_client_modeset_connector_helper_funcs = {
+ .get_modes = drm_client_modeset_connector_get_modes,
+};
+
+static const struct drm_connector_funcs drm_client_modeset_connector_funcs = {
+};
+
+static int drm_client_modeset_test_init(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv;
+ int ret;
+
+ priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ test->priv = priv;
+
+ priv->drm = drm_kunit_device_init(test,
"drm-client-modeset-test");
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+ ret = drmm_connector_init(priv->drm, &priv->connector,
+ &drm_client_modeset_connector_funcs,
+ DRM_MODE_CONNECTOR_Unknown,
+ NULL);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ drm_connector_helper_add(&priv->connector,
&drm_client_modeset_connector_helper_funcs);
+
+ return 0;
+
+}
+
+static void drm_test_pick_cmdline_res_1920_1080_60(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv = test->priv;
+ struct drm_device *drm = priv->drm;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+ struct drm_display_mode *expected_mode, *mode;
+ const char *cmdline = "1920x1080 at 60";
+ int ret;
+
+ expected_mode = drm_mode_find_dmt(priv->drm, 1920, 1080, 60, false);
+ KUNIT_ASSERT_NOT_NULL(test, expected_mode);
+
+ KUNIT_ASSERT_TRUE(test,
+ drm_mode_parse_command_line_for_connector(cmdline,
+ connector,
+ cmdline_mode));
+
+ mutex_lock(&drm->mode_config.mutex);
+ ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+ mutex_unlock(&drm->mode_config.mutex);
+ KUNIT_ASSERT_GT(test, ret, 0);
+
+ mode = drm_connector_pick_cmdline_mode(connector);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+
+static struct kunit_case drm_test_pick_cmdline_tests[] = {
+ KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+ {}
+};
+
+static struct kunit_suite drm_test_pick_cmdline_test_suite = {
+ .name = "drm_test_pick_cmdline",
+ .init = drm_client_modeset_test_init,
+ .test_cases = drm_test_pick_cmdline_tests
+};
+
+kunit_test_suite(drm_test_pick_cmdline_test_suite);
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 08/23] drm/modes: Move named modes parsing to a separate function
The current construction of the named mode parsing doesn't allow to extend
it easily. Let's move it to a separate function so we can add more
parameters and modes.
In order for the tests to still pass, some extra checks are needed, so
it's not a 1:1 move.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v7:
- Add Noralf Reviewed-by
Changes in v6:
- Simplify the test for connection status extras
- Simplify the code path to call drm_mode_parse_cmdline_named_mode
Changes in v4:
- Fold down all the named mode patches that were split into a single
patch again to maintain bisectability
---
drivers/gpu/drm/drm_modes.c | 70 +++++++++++++++++++++++++++++++++++++--------
1 file changed, 58 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 71c050c3ee6b..37542612912b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2229,6 +2229,51 @@ static const char * const drm_named_modes_whitelist[] = {
"PAL",
};
+static int drm_mode_parse_cmdline_named_mode(const char *name,
+ unsigned int name_end,
+ struct drm_cmdline_mode *cmdline_mode)
+{
+ unsigned int i;
+
+ if (!name_end)
+ return 0;
+
+ /* If the name starts with a digit, it's not a named mode */
+ if (isdigit(name[0]))
+ return 0;
+
+ /*
+ * If there's an equal sign in the name, the command-line
+ * contains only an option and no mode.
+ */
+ if (strnchr(name, name_end, '='))
+ return 0;
+
+ /* The connection status extras can be set without a mode. */
+ if (name_end == 1 &&
+ (name[0] == 'd' || name[0] == 'D' || name[0] ==
'e'))
+ return 0;
+
+ /*
+ * We're sure we're a named mode at this point, iterate over the
+ * list of modes we're aware of.
+ */
+ for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+ int ret;
+
+ ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+ if (ret != name_end)
+ continue;
+
+ strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+ cmdline_mode->specified = true;
+
+ return 1;
+ }
+
+ return -EINVAL;
+}
+
/**
* drm_mode_parse_command_line_for_connector - parse command line modeline for
connector
* @mode_option: optional per connector mode option
@@ -2265,7 +2310,7 @@ bool drm_mode_parse_command_line_for_connector(const char
*mode_option,
const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
const char *options_ptr = NULL;
char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
- int i, len, ret;
+ int len, ret;
memset(mode, 0, sizeof(*mode));
mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
@@ -2306,18 +2351,19 @@ bool drm_mode_parse_command_line_for_connector(const
char *mode_option,
parse_extras = true;
}
- /* First check for a named mode */
- for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
- ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
- if (ret == mode_end) {
- if (refresh_ptr)
- return false; /* named + refresh is invalid */
+ if (!mode_end)
+ return false;
- strcpy(mode->name, drm_named_modes_whitelist[i]);
- mode->specified = true;
- break;
- }
- }
+ ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
+ if (ret < 0)
+ return false;
+
+ /*
+ * Having a mode that starts by a letter (and thus is named) and
+ * an at-sign (used to specify a refresh rate) is disallowed.
+ */
+ if (ret && refresh_ptr)
+ return false;
/* No named mode? Check for a normal mode argument, e.g. 1024x768 */
if (!mode->specified && isdigit(name[0])) {
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 09/23] drm/modes: Switch to named mode descriptors
The current named mode parsing relies only on the mode name, and doesn't
allow to specify any other parameter.
Let's convert that string list to an array of a custom structure that will
hold the name and some additional parameters in the future.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v7:
- Fix typo in the commit log
- Add Noralf Reviewed-by
---
drivers/gpu/drm/drm_modes.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 37542612912b..7594b657f86a 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2224,9 +2224,13 @@ static int drm_mode_parse_cmdline_options(const char
*str,
return 0;
}
-static const char * const drm_named_modes_whitelist[] = {
- "NTSC",
- "PAL",
+struct drm_named_mode {
+ const char *name;
+};
+
+static const struct drm_named_mode drm_named_modes[] = {
+ { "NTSC", },
+ { "PAL", },
};
static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2258,14 +2262,15 @@ static int drm_mode_parse_cmdline_named_mode(const char
*name,
* We're sure we're a named mode at this point, iterate over the
* list of modes we're aware of.
*/
- for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+ for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+ const struct drm_named_mode *mode = &drm_named_modes[i];
int ret;
- ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+ ret = str_has_prefix(name, mode->name);
if (ret != name_end)
continue;
- strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+ strcpy(cmdline_mode->name, mode->name);
cmdline_mode->specified = true;
return 1;
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 10/23] drm/modes: Fill drm_cmdline mode from named modes
The current code to deal with named modes will only set the mode name, and
then it's up to drivers to try to match that name to whatever mode or
configuration they see fit.
The plan is to remove that need and move the named mode handling out of
drivers and into the core, and only rely on modes and properties. Let's
start by properly filling drm_cmdline_mode from a named mode.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v7:
- Add Noralf Reviewed-by:w
---
drivers/gpu/drm/drm_modes.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 7594b657f86a..acee23e1a8b7 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,11 +2226,22 @@ static int drm_mode_parse_cmdline_options(const char
*str,
struct drm_named_mode {
const char *name;
+ unsigned int xres;
+ unsigned int yres;
+ unsigned int flags;
};
+#define NAMED_MODE(_name, _x, _y, _flags) \
+ { \
+ .name = _name, \
+ .xres = _x, \
+ .yres = _y, \
+ .flags = _flags, \
+ }
+
static const struct drm_named_mode drm_named_modes[] = {
- { "NTSC", },
- { "PAL", },
+ NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
+ NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
};
static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2271,6 +2282,9 @@ static int drm_mode_parse_cmdline_named_mode(const char
*name,
continue;
strcpy(cmdline_mode->name, mode->name);
+ cmdline_mode->xres = mode->xres;
+ cmdline_mode->yres = mode->yres;
+ cmdline_mode->interlace = !!(mode->flags &
DRM_MODE_FLAG_INTERLACE);
cmdline_mode->specified = true;
return 1;
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 11/23] drm/connector: Add pixel clock to cmdline mode
We'll need to get the pixel clock to generate proper display modes for
all the current named modes. Let's add it to struct drm_cmdline_mode and
fill it when parsing the named mode.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v7:
- Add Noralf Reviewed-by:w
---
drivers/gpu/drm/drm_modes.c | 9 ++++++---
include/drm/drm_connector.h | 7 +++++++
2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index acee23e1a8b7..c826f9583a1d 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,22 +2226,24 @@ static int drm_mode_parse_cmdline_options(const char
*str,
struct drm_named_mode {
const char *name;
+ unsigned int pixel_clock_khz;
unsigned int xres;
unsigned int yres;
unsigned int flags;
};
-#define NAMED_MODE(_name, _x, _y, _flags) \
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags) \
{ \
.name = _name, \
+ .pixel_clock_khz = _pclk, \
.xres = _x, \
.yres = _y, \
.flags = _flags, \
}
static const struct drm_named_mode drm_named_modes[] = {
- NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
- NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
+ NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
+ NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
};
static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2282,6 +2284,7 @@ static int drm_mode_parse_cmdline_named_mode(const char
*name,
continue;
strcpy(cmdline_mode->name, mode->name);
+ cmdline_mode->pixel_clock = mode->pixel_clock_khz;
cmdline_mode->xres = mode->xres;
cmdline_mode->yres = mode->yres;
cmdline_mode->interlace = !!(mode->flags &
DRM_MODE_FLAG_INTERLACE);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 9afc7956fdc6..4927dcb2573f 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1273,6 +1273,13 @@ struct drm_cmdline_mode {
*/
bool bpp_specified;
+ /**
+ * @pixel_clock:
+ *
+ * Pixel Clock in kHz. Optional.
+ */
+ unsigned int pixel_clock;
+
/**
* @xres:
*
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 12/23] drm/connector: Add a function to lookup a TV mode by its name
As part of the command line parsing rework coming in the next patches,
we'll need to lookup drm_connector_tv_mode values by their name, already
defined in drm_tv_mode_enum_list.
In order to avoid any code duplication, let's do a function that will
perform a lookup of a TV mode name and return its value.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v7:
- Add kunit tests
---
drivers/gpu/drm/drm_connector.c | 24 ++++++++
drivers/gpu/drm/tests/Makefile | 1 +
drivers/gpu/drm/tests/drm_connector_test.c | 90 ++++++++++++++++++++++++++++++
include/drm/drm_connector.h | 2 +
4 files changed, 117 insertions(+)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index f9a6cb792bda..9aec878c8509 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -995,6 +995,30 @@ static const struct drm_prop_enum_list
drm_tv_mode_enum_list[] = {
};
DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
+/**
+ * drm_get_tv_mode_from_name - Translates a TV mode name into its enum value
+ * @name: TV Mode name we want to convert
+ * @len: Length of @name
+ *
+ * Translates @name into an enum drm_connector_tv_mode.
+ *
+ * Returns: the enum value on success, a negative errno otherwise.
+ */
+int drm_get_tv_mode_from_name(const char *name, size_t len)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(drm_tv_mode_enum_list); i++) {
+ const struct drm_prop_enum_list *item = &drm_tv_mode_enum_list[i];
+
+ if (strlen(item->name) == len && !strncmp(item->name, name,
len))
+ return item->type;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(drm_get_tv_mode_from_name);
+
static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and
TV-out */
{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b22ac96fdd65..c7903c112c65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -3,6 +3,7 @@
obj-$(CONFIG_DRM_KUNIT_TEST) += \
drm_buddy_test.o \
drm_cmdline_parser_test.o \
+ drm_connector_test.o \
drm_damage_helper_test.o \
drm_dp_mst_helper_test.o \
drm_format_helper_test.o \
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c
b/drivers/gpu/drm/tests/drm_connector_test.c
new file mode 100644
index 000000000000..f2272b9df211
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <drm/drm_connector.h>
+
+#include <kunit/test.h>
+
+struct drm_get_tv_mode_from_name_test {
+ const char *name;
+ enum drm_connector_tv_mode expected_mode;
+};
+
+#define TV_MODE_NAME(_name, _mode) \
+ { \
+ .name = _name, \
+ .expected_mode = _mode, \
+ }
+
+static void drm_test_get_tv_mode_from_name_valid(struct kunit *test)
+{
+ const struct drm_get_tv_mode_from_name_test *params = test->param_value;
+
+ KUNIT_EXPECT_EQ(test,
+ drm_get_tv_mode_from_name(params->name, strlen(params->name)),
+ params->expected_mode);
+}
+
+static const
+struct drm_get_tv_mode_from_name_test drm_get_tv_mode_from_name_valid_tests[] =
{
+ TV_MODE_NAME("NTSC", DRM_MODE_TV_MODE_NTSC),
+ TV_MODE_NAME("NTSC-443", DRM_MODE_TV_MODE_NTSC_443),
+ TV_MODE_NAME("NTSC-J", DRM_MODE_TV_MODE_NTSC_J),
+ TV_MODE_NAME("PAL", DRM_MODE_TV_MODE_PAL),
+ TV_MODE_NAME("PAL-M", DRM_MODE_TV_MODE_PAL_M),
+ TV_MODE_NAME("PAL-N", DRM_MODE_TV_MODE_PAL_N),
+ TV_MODE_NAME("SECAM", DRM_MODE_TV_MODE_SECAM),
+};
+
+static void
+drm_get_tv_mode_from_name_valid_desc(const struct
drm_get_tv_mode_from_name_test *t,
+ char *desc)
+{
+ sprintf(desc, "%s", t->name);
+}
+KUNIT_ARRAY_PARAM(drm_get_tv_mode_from_name_valid,
+ drm_get_tv_mode_from_name_valid_tests,
+ drm_get_tv_mode_from_name_valid_desc);
+
+static void drm_test_get_tv_mode_from_name_invalid(struct kunit *test)
+{
+ const char *name = *(const char **)test->param_value;
+
+ KUNIT_EXPECT_LT(test,
+ drm_get_tv_mode_from_name(name, strlen(name)),
+ 0);
+}
+
+static const
+char *drm_get_tv_mode_from_name_invalid_tests[] = {
+ /* Truncated */
+ "NTS",
+};
+
+static void
+drm_get_tv_mode_from_name_invalid_desc(const char **name, char *desc)
+{
+ sprintf(desc, "%s", *name);
+}
+KUNIT_ARRAY_PARAM(drm_get_tv_mode_from_name_invalid,
+ drm_get_tv_mode_from_name_invalid_tests,
+ drm_get_tv_mode_from_name_invalid_desc);
+
+static struct kunit_case drm_get_tv_mode_from_name_tests[] = {
+ KUNIT_CASE_PARAM(drm_test_get_tv_mode_from_name_valid,
+ drm_get_tv_mode_from_name_valid_gen_params),
+ KUNIT_CASE_PARAM(drm_test_get_tv_mode_from_name_invalid,
+ drm_get_tv_mode_from_name_invalid_gen_params),
+ { }
+};
+
+static struct kunit_suite drm_get_tv_mode_from_name_test_suite = {
+ .name = "drm_get_tv_mode_from_name",
+ .test_cases = drm_get_tv_mode_from_name_tests,
+};
+
+kunit_test_suites(
+ &drm_get_tv_mode_from_name_test_suite
+);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 4927dcb2573f..c856f4871697 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1872,6 +1872,8 @@ const char *drm_get_dp_subconnector_name(int val);
const char *drm_get_content_protection_name(int val);
const char *drm_get_hdcp_content_type_name(int val);
+int drm_get_tv_mode_from_name(const char *name, size_t len);
+
int drm_mode_create_dvi_i_properties(struct drm_device *dev);
void drm_connector_attach_dp_subconnector_property(struct drm_connector
*connector);
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 13/23] drm/modes: Introduce the tv_mode property as a command-line option
Our new tv mode option allows to specify the TV mode from a property.
However, it can still be useful, for example to avoid any boot time
artifact, to set that property directly from the kernel command line.
Let's add some code to allow it, and some unit tests to exercise that code.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v7:
- Add Noralf Reviewed-by
Changes in v6:
- Add a tv_mode_specified field
Changes in v4:
- Add Documentation of the command-line option to modedb.rst
---
Documentation/fb/modedb.rst | 2 +
drivers/gpu/drm/drm_modes.c | 37 ++++++++++++--
drivers/gpu/drm/tests/drm_cmdline_parser_test.c | 67 +++++++++++++++++++++++++
include/drm/drm_connector.h | 12 +++++
4 files changed, 115 insertions(+), 3 deletions(-)
diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index 4d2411e32ebb..5d6361a77f3c 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -65,6 +65,8 @@ Valid options are::
- reflect_y (boolean): Perform an axial symmetry on the Y axis
- rotate (integer): Rotate the initial framebuffer by x
degrees. Valid values are 0, 90, 180 and 270.
+ - tv_mode: Analog TV mode. One of "NTSC", "NTSC-443",
"NTSC-J", "PAL",
+ "PAL-M", "PAL-N", or "SECAM".
- panel_orientation, one of "normal", "upside_down",
"left_side_up", or
"right_side_up". For KMS drivers only, this sets the "panel
orientation"
property on the kms connector as hint for kms users.
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index c826f9583a1d..dc037f7ceb37 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2133,6 +2133,30 @@ static int drm_mode_parse_panel_orientation(const char
*delim,
return 0;
}
+static int drm_mode_parse_tv_mode(const char *delim,
+ struct drm_cmdline_mode *mode)
+{
+ const char *value;
+ int ret;
+
+ if (*delim != '=')
+ return -EINVAL;
+
+ value = delim + 1;
+ delim = strchr(value, ',');
+ if (!delim)
+ delim = value + strlen(value);
+
+ ret = drm_get_tv_mode_from_name(value, delim - value);
+ if (ret < 0)
+ return ret;
+
+ mode->tv_mode_specified = true;
+ mode->tv_mode = ret;
+
+ return 0;
+}
+
static int drm_mode_parse_cmdline_options(const char *str,
bool freestanding,
const struct drm_connector *connector,
@@ -2202,6 +2226,9 @@ static int drm_mode_parse_cmdline_options(const char *str,
} else if (!strncmp(option, "panel_orientation", delim - option)) {
if (drm_mode_parse_panel_orientation(delim, mode))
return -EINVAL;
+ } else if (!strncmp(option, "tv_mode", delim - option)) {
+ if (drm_mode_parse_tv_mode(delim, mode))
+ return -EINVAL;
} else {
return -EINVAL;
}
@@ -2230,20 +2257,22 @@ struct drm_named_mode {
unsigned int xres;
unsigned int yres;
unsigned int flags;
+ unsigned int tv_mode;
};
-#define NAMED_MODE(_name, _pclk, _x, _y, _flags) \
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags, _mode) \
{ \
.name = _name, \
.pixel_clock_khz = _pclk, \
.xres = _x, \
.yres = _y, \
.flags = _flags, \
+ .tv_mode = _mode, \
}
static const struct drm_named_mode drm_named_modes[] = {
- NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
- NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
+ NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_NTSC),
+ NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_PAL),
};
static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2288,6 +2317,8 @@ static int drm_mode_parse_cmdline_named_mode(const char
*name,
cmdline_mode->xres = mode->xres;
cmdline_mode->yres = mode->yres;
cmdline_mode->interlace = !!(mode->flags &
DRM_MODE_FLAG_INTERLACE);
+ cmdline_mode->tv_mode = mode->tv_mode;
+ cmdline_mode->tv_mode_specified = true;
cmdline_mode->specified = true;
return 1;
diff --git a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
index 34790e7a3760..3e711b83b823 100644
--- a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
+++ b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
@@ -927,6 +927,14 @@ static const struct drm_cmdline_invalid_test
drm_cmdline_invalid_tests[] = {
.name = "invalid_option",
.cmdline = "720x480,test=42",
},
+ {
+ .name = "invalid_tv_option",
+ .cmdline = "720x480i,tv_mode=invalid",
+ },
+ {
+ .name = "truncated_tv_option",
+ .cmdline = "720x480i,tv_mode=NTS",
+ },
};
static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
@@ -937,6 +945,64 @@ static void drm_cmdline_invalid_desc(const struct
drm_cmdline_invalid_test *t,
KUNIT_ARRAY_PARAM(drm_cmdline_invalid, drm_cmdline_invalid_tests,
drm_cmdline_invalid_desc);
+struct drm_cmdline_tv_option_test {
+ const char *name;
+ const char *cmdline;
+ struct drm_display_mode *(*mode_fn)(struct drm_device *dev);
+ enum drm_connector_tv_mode tv_mode;
+};
+
+static void drm_test_cmdline_tv_options(struct kunit *test)
+{
+ const struct drm_cmdline_tv_option_test *params = test->param_value;
+ const struct drm_display_mode *expected_mode = params->mode_fn(NULL);
+ struct drm_cmdline_mode mode = { };
+
+ KUNIT_EXPECT_TRUE(test,
drm_mode_parse_command_line_for_connector(params->cmdline,
+ &no_connector, &mode));
+ KUNIT_EXPECT_TRUE(test, mode.specified);
+ KUNIT_EXPECT_EQ(test, mode.xres, expected_mode->hdisplay);
+ KUNIT_EXPECT_EQ(test, mode.yres, expected_mode->vdisplay);
+ KUNIT_EXPECT_EQ(test, mode.tv_mode, params->tv_mode);
+
+ KUNIT_EXPECT_FALSE(test, mode.refresh_specified);
+
+ KUNIT_EXPECT_FALSE(test, mode.bpp_specified);
+
+ KUNIT_EXPECT_FALSE(test, mode.rb);
+ KUNIT_EXPECT_FALSE(test, mode.cvt);
+ KUNIT_EXPECT_EQ(test, mode.interlace, !!(expected_mode->flags &
DRM_MODE_FLAG_INTERLACE));
+ KUNIT_EXPECT_FALSE(test, mode.margins);
+ KUNIT_EXPECT_EQ(test, mode.force, DRM_FORCE_UNSPECIFIED);
+}
+
+#define TV_OPT_TEST(_opt, _cmdline, _mode_fn) \
+ { \
+ .name = #_opt, \
+ .cmdline = _cmdline, \
+ .mode_fn = _mode_fn, \
+ .tv_mode = DRM_MODE_TV_MODE_ ## _opt, \
+ }
+
+static const struct drm_cmdline_tv_option_test drm_cmdline_tv_option_tests[] =
{
+ TV_OPT_TEST(NTSC, "720x480i,tv_mode=NTSC",
drm_mode_analog_ntsc_480i),
+ TV_OPT_TEST(NTSC_443, "720x480i,tv_mode=NTSC-443",
drm_mode_analog_ntsc_480i),
+ TV_OPT_TEST(NTSC_J, "720x480i,tv_mode=NTSC-J",
drm_mode_analog_ntsc_480i),
+ TV_OPT_TEST(PAL, "720x576i,tv_mode=PAL", drm_mode_analog_pal_576i),
+ TV_OPT_TEST(PAL_M, "720x480i,tv_mode=PAL-M",
drm_mode_analog_ntsc_480i),
+ TV_OPT_TEST(PAL_N, "720x576i,tv_mode=PAL-N",
drm_mode_analog_pal_576i),
+ TV_OPT_TEST(SECAM, "720x576i,tv_mode=SECAM",
drm_mode_analog_pal_576i),
+};
+
+static void drm_cmdline_tv_option_desc(const struct drm_cmdline_tv_option_test
*t,
+ char *desc)
+{
+ sprintf(desc, "%s", t->name);
+}
+KUNIT_ARRAY_PARAM(drm_cmdline_tv_option,
+ drm_cmdline_tv_option_tests,
+ drm_cmdline_tv_option_desc);
+
static struct kunit_case drm_cmdline_parser_tests[] = {
KUNIT_CASE(drm_test_cmdline_force_d_only),
KUNIT_CASE(drm_test_cmdline_force_D_only_dvi),
@@ -977,6 +1043,7 @@ static struct kunit_case drm_cmdline_parser_tests[] = {
KUNIT_CASE(drm_test_cmdline_freestanding_force_e_and_options),
KUNIT_CASE(drm_test_cmdline_panel_orientation),
KUNIT_CASE_PARAM(drm_test_cmdline_invalid, drm_cmdline_invalid_gen_params),
+ KUNIT_CASE_PARAM(drm_test_cmdline_tv_options,
drm_cmdline_tv_option_gen_params),
{}
};
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index c856f4871697..ffca0a857d53 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1368,6 +1368,18 @@ struct drm_cmdline_mode {
* @tv_margins: TV margins to apply to the mode.
*/
struct drm_connector_tv_margins tv_margins;
+
+ /**
+ * @tv_mode: TV mode standard. See DRM_MODE_TV_MODE_*.
+ */
+ enum drm_connector_tv_mode tv_mode;
+
+ /**
+ * @tv_mode_specified:
+ *
+ * Did the mode have a preferred TV mode?
+ */
+ bool tv_mode_specified;
};
/**
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 14/23] drm/modes: Properly generate a drm_display_mode from a named mode
The framework will get the drm_display_mode from the drm_cmdline_mode it
got by parsing the video command line argument by calling
drm_connector_pick_cmdline_mode().
The heavy lifting will then be done by the drm_mode_create_from_cmdline_mode()
function.
In the case of the named modes though, there's no real code to make that
translation and we rely on the drivers to guess which actual display mode
we meant.
Let's modify drm_mode_create_from_cmdline_mode() to properly generate the
drm_display_mode we mean when passing a named mode.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v7:
- Use tv_mode_specified in drm_mode_parse_command_line_for_connector
Changes in v6:
- Fix get_modes to return 0 instead of an error code
- Rename the tests to follow the DRM test naming convention
Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
drivers/gpu/drm/drm_modes.c | 34 ++++++++++-
drivers/gpu/drm/tests/drm_client_modeset_test.c | 77 ++++++++++++++++++++++++-
2 files changed, 109 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index dc037f7ceb37..49441cabdd9d 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2497,6 +2497,36 @@ bool drm_mode_parse_command_line_for_connector(const char
*mode_option,
}
EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector);
+static struct drm_display_mode *drm_named_mode(struct drm_device *dev,
+ struct drm_cmdline_mode *cmd)
+{
+ struct drm_display_mode *mode;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+ const struct drm_named_mode *named_mode = &drm_named_modes[i];
+
+ if (strcmp(cmd->name, named_mode->name))
+ continue;
+
+ if (!cmd->tv_mode_specified)
+ continue;
+
+ mode = drm_analog_tv_mode(dev,
+ named_mode->tv_mode,
+ named_mode->pixel_clock_khz * 1000,
+ named_mode->xres,
+ named_mode->yres,
+ named_mode->flags & DRM_MODE_FLAG_INTERLACE);
+ if (!mode)
+ return NULL;
+
+ return mode;
+ }
+
+ return NULL;
+}
+
/**
* drm_mode_create_from_cmdline_mode - convert a command line modeline into a
DRM display mode
* @dev: DRM device to create the new mode for
@@ -2514,7 +2544,9 @@ drm_mode_create_from_cmdline_mode(struct drm_device *dev,
if (cmd->xres == 0 || cmd->yres == 0)
return NULL;
- if (cmd->cvt)
+ if (strlen(cmd->name))
+ mode = drm_named_mode(dev, cmd);
+ else if (cmd->cvt)
mode = drm_cvt_mode(dev,
cmd->xres, cmd->yres,
cmd->refresh_specified ? cmd->refresh : 60,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c
b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 3aa1acfe75df..fdfe9e20702e 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -21,7 +21,26 @@ struct drm_client_modeset_test_priv {
static int drm_client_modeset_connector_get_modes(struct drm_connector
*connector)
{
- return drm_add_modes_noedid(connector, 1920, 1200);
+ struct drm_display_mode *mode;
+ int count;
+
+ count = drm_add_modes_noedid(connector, 1920, 1200);
+
+ mode = drm_mode_analog_ntsc_480i(connector->dev);
+ if (!mode)
+ return count;
+
+ drm_mode_probed_add(connector, mode);
+ count += 1;
+
+ mode = drm_mode_analog_pal_576i(connector->dev);
+ if (!mode)
+ return count;
+
+ drm_mode_probed_add(connector, mode);
+ count += 1;
+
+ return count;
}
static const struct drm_connector_helper_funcs
drm_client_modeset_connector_helper_funcs = {
@@ -52,6 +71,9 @@ static int drm_client_modeset_test_init(struct kunit *test)
drm_connector_helper_add(&priv->connector,
&drm_client_modeset_connector_helper_funcs);
+ priv->connector.interlace_allowed = true;
+ priv->connector.doublescan_allowed = true;
+
return 0;
}
@@ -85,9 +107,62 @@ static void drm_test_pick_cmdline_res_1920_1080_60(struct
kunit *test)
KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
}
+static void drm_test_pick_cmdline_named_ntsc(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv = test->priv;
+ struct drm_device *drm = priv->drm;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+ struct drm_display_mode *mode;
+ const char *cmdline = "NTSC";
+ int ret;
+
+ KUNIT_ASSERT_TRUE(test,
+ drm_mode_parse_command_line_for_connector(cmdline,
+ connector,
+ cmdline_mode));
+
+ mutex_lock(&drm->mode_config.mutex);
+ ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+ mutex_unlock(&drm->mode_config.mutex);
+ KUNIT_ASSERT_GT(test, ret, 0);
+
+ mode = drm_connector_pick_cmdline_mode(connector);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_ntsc_480i(drm), mode));
+}
+
+static void drm_test_pick_cmdline_named_pal(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv = test->priv;
+ struct drm_device *drm = priv->drm;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+ struct drm_display_mode *mode;
+ const char *cmdline = "PAL";
+ int ret;
+
+ KUNIT_ASSERT_TRUE(test,
+ drm_mode_parse_command_line_for_connector(cmdline,
+ connector,
+ cmdline_mode));
+
+ mutex_lock(&drm->mode_config.mutex);
+ ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+ mutex_unlock(&drm->mode_config.mutex);
+ KUNIT_ASSERT_GT(test, ret, 0);
+
+ mode = drm_connector_pick_cmdline_mode(connector);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_pal_576i(drm), mode));
+}
static struct kunit_case drm_test_pick_cmdline_tests[] = {
KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
+ KUNIT_CASE(drm_test_pick_cmdline_named_ntsc),
+ KUNIT_CASE(drm_test_pick_cmdline_named_pal),
{}
};
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 15/23] drm/modes: Introduce more named modes
Now that we can easily extend the named modes list, let's add a few more
analog TV modes that were used in the wild, and some unit tests to make
sure it works as intended.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v6:
- Renamed the tests to follow DRM test naming convention
Changes in v5:
- Switched to KUNIT_ASSERT_NOT_NULL
---
drivers/gpu/drm/drm_modes.c | 2 +
drivers/gpu/drm/tests/drm_client_modeset_test.c | 54 +++++++++++++++++++++++++
2 files changed, 56 insertions(+)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 49441cabdd9d..17c5b6108103 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2272,7 +2272,9 @@ struct drm_named_mode {
static const struct drm_named_mode drm_named_modes[] = {
NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_NTSC),
+ NAMED_MODE("NTSC-J", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_NTSC_J),
NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_PAL),
+ NAMED_MODE("PAL-M", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_PAL_M),
};
static int drm_mode_parse_cmdline_named_mode(const char *name,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c
b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index fdfe9e20702e..b3820d25beca 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -133,6 +133,32 @@ static void drm_test_pick_cmdline_named_ntsc(struct kunit
*test)
KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_ntsc_480i(drm), mode));
}
+static void drm_test_pick_cmdline_named_ntsc_j(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv = test->priv;
+ struct drm_device *drm = priv->drm;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+ struct drm_display_mode *mode;
+ const char *cmdline = "NTSC-J";
+ int ret;
+
+ KUNIT_ASSERT_TRUE(test,
+ drm_mode_parse_command_line_for_connector(cmdline,
+ connector,
+ cmdline_mode));
+
+ mutex_lock(&drm->mode_config.mutex);
+ ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+ mutex_unlock(&drm->mode_config.mutex);
+ KUNIT_ASSERT_GT(test, ret, 0);
+
+ mode = drm_connector_pick_cmdline_mode(connector);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_ntsc_480i(drm), mode));
+}
+
static void drm_test_pick_cmdline_named_pal(struct kunit *test)
{
struct drm_client_modeset_test_priv *priv = test->priv;
@@ -159,10 +185,38 @@ static void drm_test_pick_cmdline_named_pal(struct kunit
*test)
KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_pal_576i(drm), mode));
}
+static void drm_test_pick_cmdline_named_pal_m(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv = test->priv;
+ struct drm_device *drm = priv->drm;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+ struct drm_display_mode *mode;
+ const char *cmdline = "PAL-M";
+ int ret;
+
+ KUNIT_ASSERT_TRUE(test,
+ drm_mode_parse_command_line_for_connector(cmdline,
+ connector,
+ cmdline_mode));
+
+ mutex_lock(&drm->mode_config.mutex);
+ ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+ mutex_unlock(&drm->mode_config.mutex);
+ KUNIT_ASSERT_GT(test, ret, 0);
+
+ mode = drm_connector_pick_cmdline_mode(connector);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_ntsc_480i(drm), mode));
+}
+
static struct kunit_case drm_test_pick_cmdline_tests[] = {
KUNIT_CASE(drm_test_pick_cmdline_res_1920_1080_60),
KUNIT_CASE(drm_test_pick_cmdline_named_ntsc),
+ KUNIT_CASE(drm_test_pick_cmdline_named_ntsc_j),
KUNIT_CASE(drm_test_pick_cmdline_named_pal),
+ KUNIT_CASE(drm_test_pick_cmdline_named_pal_m),
{}
};
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 16/23] drm/probe-helper: Provide a TV get_modes helper
From: Noralf Tr?nnes <noralf at tronnes.org>
Most of the TV connectors will need a similar get_modes implementation
that will, depending on the drivers' capabilities, register the 480i and
576i modes.
That implementation will also need to set the preferred flag and order
the modes based on the driver and users preferrence.
This is especially important to guarantee that a userspace stack such as
Xorg can start and pick up the preferred mode while maintaining a
working output.
Signed-off-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v7:
- Used Noralf's implementation
Changes in v6:
- New patch
---
drivers/gpu/drm/drm_probe_helper.c | 97 ++++++++++++++++++++++++++++++++++++++
include/drm/drm_probe_helper.h | 1 +
2 files changed, 98 insertions(+)
diff --git a/drivers/gpu/drm/drm_probe_helper.c
b/drivers/gpu/drm/drm_probe_helper.c
index 2fc21df709bc..edb2e4c4530a 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -1147,3 +1147,100 @@ int drm_connector_helper_get_modes(struct drm_connector
*connector)
return count;
}
EXPORT_SYMBOL(drm_connector_helper_get_modes);
+
+static bool tv_mode_supported(struct drm_connector *connector,
+ enum drm_connector_tv_mode mode)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_property *property = dev->mode_config.tv_mode_property;
+
+ unsigned int i;
+
+ for (i = 0; i < property->num_values; i++)
+ if (property->values[i] == mode)
+ return true;
+
+ return false;
+}
+
+/**
+ * drm_connector_helper_tv_get_modes - Fills the modes availables to a TV
connector
+ * @connector: The connector
+ *
+ * Fills the available modes for a TV connector based on the supported
+ * TV modes, and the default mode expressed by the kernel command line.
+ *
+ * This can be used as the default TV connector helper .get_modes() hook
+ * if the driver does not need any special processing.
+ *
+ * Returns:
+ * The number of modes added to the connector.
+ */
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_property *tv_mode_property + dev->mode_config.tv_mode_property;
+ struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+ unsigned int ntsc_modes = BIT(DRM_MODE_TV_MODE_NTSC) |
+ BIT(DRM_MODE_TV_MODE_NTSC_443) |
+ BIT(DRM_MODE_TV_MODE_NTSC_J) |
+ BIT(DRM_MODE_TV_MODE_PAL_M);
+ unsigned int pal_modes = BIT(DRM_MODE_TV_MODE_PAL) |
+ BIT(DRM_MODE_TV_MODE_PAL_N) |
+ BIT(DRM_MODE_TV_MODE_SECAM);
+ unsigned int tv_modes[2] = { UINT_MAX, UINT_MAX };
+ unsigned int i, supported_tv_modes = 0;
+
+ if (!tv_mode_property)
+ return 0;
+
+ for (i = 0; i < tv_mode_property->num_values; i++)
+ supported_tv_modes |= BIT(tv_mode_property->values[i]);
+
+ if ((supported_tv_modes & ntsc_modes) &&
+ (supported_tv_modes & pal_modes)) {
+ uint64_t default_mode;
+
+ if (drm_object_property_get_default_value(&connector->base,
+ tv_mode_property,
+ &default_mode))
+ return 0;
+
+ if (cmdline->tv_mode_specified)
+ default_mode = cmdline->tv_mode;
+
+ if (BIT(default_mode) & ntsc_modes) {
+ tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+ tv_modes[1] = DRM_MODE_TV_MODE_PAL;
+ } else {
+ tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+ tv_modes[1] = DRM_MODE_TV_MODE_NTSC;
+ }
+ } else if (supported_tv_modes & ntsc_modes) {
+ tv_modes[0] = DRM_MODE_TV_MODE_NTSC;
+ } else if (supported_tv_modes & pal_modes) {
+ tv_modes[0] = DRM_MODE_TV_MODE_PAL;
+ } else {
+ return 0;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
+ struct drm_display_mode *mode;
+
+ if (tv_modes[i] == DRM_MODE_TV_MODE_NTSC)
+ mode = drm_mode_analog_ntsc_480i(dev);
+ else if (tv_modes[i] == DRM_MODE_TV_MODE_PAL)
+ mode = drm_mode_analog_pal_576i(dev);
+ else
+ break;
+ if (!mode)
+ return i;
+ if (!i)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+ drm_mode_probed_add(connector, mode);
+ }
+
+ return i;
+}
+EXPORT_SYMBOL(drm_connector_helper_tv_get_modes);
diff --git a/include/drm/drm_probe_helper.h b/include/drm/drm_probe_helper.h
index 5880daa14624..4977e0ab72db 100644
--- a/include/drm/drm_probe_helper.h
+++ b/include/drm/drm_probe_helper.h
@@ -35,5 +35,6 @@ int drm_connector_helper_get_modes_from_ddc(struct
drm_connector *connector);
int drm_connector_helper_get_modes_fixed(struct drm_connector *connector,
const struct drm_display_mode *fixed_mode);
int drm_connector_helper_get_modes(struct drm_connector *connector);
+int drm_connector_helper_tv_get_modes(struct drm_connector *connector);
#endif
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 17/23] drm/atomic-helper: Add a TV properties reset helper
The drm_tv_create_properties() function will create a bunch of properties,
but it's up to each and every driver using that function to properly reset
the state of these properties leading to inconsistent behaviours.
Let's create a helper that will take care of it.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v6:
- Use tv_mode_specified instead of a !0 tv_mode to set the default
---
drivers/gpu/drm/drm_atomic_state_helper.c | 75 +++++++++++++++++++++++++++++++
include/drm/drm_atomic_state_helper.h | 1 +
2 files changed, 76 insertions(+)
diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c
b/drivers/gpu/drm/drm_atomic_state_helper.c
index dfb57217253b..e1fc3f26340a 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -481,6 +481,81 @@ void drm_atomic_helper_connector_tv_margins_reset(struct
drm_connector *connecto
}
EXPORT_SYMBOL(drm_atomic_helper_connector_tv_margins_reset);
+/**
+ * drm_atomic_helper_connector_tv_reset - Resets Analog TV connector properties
+ * @connector: DRM connector
+ *
+ * Resets the analog TV properties attached to a connector
+ */
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+ struct drm_connector_state *state = connector->state;
+ struct drm_property *prop;
+ uint64_t val;
+
+ prop = dev->mode_config.tv_mode_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.mode = val;
+
+ if (cmdline->tv_mode_specified)
+ state->tv.mode = cmdline->tv_mode;
+
+ prop = dev->mode_config.tv_select_subconnector_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.select_subconnector = val;
+
+ prop = dev->mode_config.tv_subconnector_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.subconnector = val;
+
+ prop = dev->mode_config.tv_brightness_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.brightness = val;
+
+ prop = dev->mode_config.tv_contrast_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.contrast = val;
+
+ prop = dev->mode_config.tv_flicker_reduction_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.flicker_reduction = val;
+
+ prop = dev->mode_config.tv_overscan_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.overscan = val;
+
+ prop = dev->mode_config.tv_saturation_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.saturation = val;
+
+ prop = dev->mode_config.tv_hue_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.hue = val;
+
+ drm_atomic_helper_connector_tv_margins_reset(connector);
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
+
/**
* __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
* @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h
b/include/drm/drm_atomic_state_helper.h
index 192766656b88..c8fbce795ee7 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -70,6 +70,7 @@ void __drm_atomic_helper_connector_state_reset(struct
drm_connector_state *conn_
void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
struct drm_connector_state *conn_state);
void drm_atomic_helper_connector_reset(struct drm_connector *connector);
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector
*connector);
void
__drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 18/23] drm/atomic-helper: Add an analog TV atomic_check implementation
The analog TV connector drivers share some atomic_check logic, and the new
TV standard property have created some boilerplate that can be be shared
across drivers too.
Let's create an atomic_check helper for those use cases.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
drivers/gpu/drm/drm_atomic_state_helper.c | 49 +++++++++++++++++++++++++++++++
include/drm/drm_atomic_state_helper.h | 3 ++
2 files changed, 52 insertions(+)
diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c
b/drivers/gpu/drm/drm_atomic_state_helper.c
index e1fc3f26340a..3a467013c656 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -556,6 +556,55 @@ void drm_atomic_helper_connector_tv_reset(struct
drm_connector *connector)
}
EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
+/**
+ * @drm_atomic_helper_connector_tv_check: Validate an analog TV connector state
+ * @connector: DRM Connector
+ * @state: the DRM State object
+ *
+ * Checks the state object to see if the requested state is valid for an
+ * analog TV connector.
+ *
+ * Returns:
+ * Zero for success, a negative error code on error.
+ */
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+ struct drm_atomic_state *state)
+{
+ struct drm_connector_state *old_conn_state +
drm_atomic_get_old_connector_state(state, connector);
+ struct drm_connector_state *new_conn_state +
drm_atomic_get_new_connector_state(state, connector);
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
+
+ crtc = new_conn_state->crtc;
+ if (!crtc)
+ return 0;
+
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+ if (!crtc_state)
+ return -EINVAL;
+
+ if (old_conn_state->tv.mode != new_conn_state->tv.mode)
+ crtc_state->mode_changed = true;
+
+ if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left)
||
+ (old_conn_state->tv.margins.right !=
new_conn_state->tv.margins.right) ||
+ (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top)
||
+ (old_conn_state->tv.margins.bottom !=
new_conn_state->tv.margins.bottom) ||
+ (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+ (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+ (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+ (old_conn_state->tv.flicker_reduction !=
new_conn_state->tv.flicker_reduction) ||
+ (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+ (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+ (old_conn_state->tv.hue != new_conn_state->tv.hue))
+ crtc_state->connectors_changed = true;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);
+
/**
* __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
* @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h
b/include/drm/drm_atomic_state_helper.h
index c8fbce795ee7..b9740edb2658 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -26,6 +26,7 @@
#include <linux/types.h>
+struct drm_atomic_state;
struct drm_bridge;
struct drm_bridge_state;
struct drm_crtc;
@@ -71,6 +72,8 @@ void __drm_atomic_helper_connector_reset(struct drm_connector
*connector,
struct drm_connector_state *conn_state);
void drm_atomic_helper_connector_reset(struct drm_connector *connector);
void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+ struct drm_atomic_state *state);
void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector
*connector);
void
__drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 19/23] drm/vc4: vec: Use TV Reset implementation
The analog TV properties created by the drm_mode_create_tv_properties() are
not properly initialised at reset. Let's switch our implementation to call
drm_atomic_helper_connector_tv_reset().
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
drivers/gpu/drm/vc4/vc4_vec.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index adc9bf99e3fd..90e375a8a8f9 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -268,6 +268,12 @@ vc4_vec_connector_detect(struct drm_connector *connector,
bool force)
return connector_status_unknown;
}
+static void vc4_vec_connector_reset(struct drm_connector *connector)
+{
+ drm_atomic_helper_connector_reset(connector);
+ drm_atomic_helper_connector_tv_reset(connector);
+}
+
static int vc4_vec_connector_get_modes(struct drm_connector *connector)
{
struct drm_connector_state *state = connector->state;
@@ -288,7 +294,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector
*connector)
static const struct drm_connector_funcs vc4_vec_connector_funcs = {
.detect = vc4_vec_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
- .reset = drm_atomic_helper_connector_reset,
+ .reset = vc4_vec_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 20/23] drm/vc4: vec: Check for VEC output constraints
From: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
The VEC can accept pretty much any relatively reasonable mode, but still
has a bunch of constraints to meet.
Let's create an atomic_check() implementation that will make sure we
don't end up accepting a non-functional mode.
Acked-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v6:
- Used htotal instead of vtotal to discriminate PAL against NTSC
---
drivers/gpu/drm/vc4/vc4_vec.c | 50 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 90e375a8a8f9..bfa8a58dba30 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -453,6 +453,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder
*encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
+ const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
const struct vc4_vec_tv_mode *vec_mode;
vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
@@ -461,6 +462,55 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder
*encoder,
!drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
return -EINVAL;
+ if (mode->crtc_hdisplay % 4)
+ return -EINVAL;
+
+ if (!(mode->crtc_hsync_end - mode->crtc_hsync_start))
+ return -EINVAL;
+
+ switch (mode->htotal) {
+ /* NTSC */
+ case 858:
+ if (mode->crtc_vtotal > 262)
+ return -EINVAL;
+
+ if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 253)
+ return -EINVAL;
+
+ if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+ return -EINVAL;
+
+ if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+ return -EINVAL;
+
+ if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 4)
+ return -EINVAL;
+
+ break;
+
+ /* PAL/SECAM */
+ case 864:
+ if (mode->crtc_vtotal > 312)
+ return -EINVAL;
+
+ if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 305)
+ return -EINVAL;
+
+ if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+ return -EINVAL;
+
+ if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+ return -EINVAL;
+
+ if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 2)
+ return -EINVAL;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
return 0;
}
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 21/23] drm/vc4: vec: Convert to the new TV mode property
Now that the core can deal fine with analog TV modes, let's convert the vc4
VEC driver to leverage those new features.
We've added some backward compatibility to support the old TV mode property
and translate it into the new TV norm property. We're also making use of
the new analog TV atomic_check helper to make sure we trigger a modeset
whenever the TV mode is updated.
Acked-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v7:
- Lookup the tv mode in atomic_check to make sure it's supported
Changes in v6:
- Use new get_modes helper
Changes in v5:
- Renamed tv_mode_names into legacy_tv_mode_names
Changes in v4:
- Removed the count variable in .get_modes
---
drivers/gpu/drm/vc4/vc4_vec.c | 186 ++++++++++++++++++++++++++++++------------
1 file changed, 132 insertions(+), 54 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index bfa8a58dba30..a828fc6fb776 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -172,6 +172,8 @@ struct vc4_vec {
struct clk *clock;
+ struct drm_property *legacy_tv_mode_property;
+
struct debugfs_regset32 regset;
};
@@ -184,6 +186,12 @@ encoder_to_vc4_vec(struct drm_encoder *encoder)
return container_of(encoder, struct vc4_vec, encoder.base);
}
+static inline struct vc4_vec *
+connector_to_vc4_vec(struct drm_connector *connector)
+{
+ return container_of(connector, struct vc4_vec, connector);
+}
+
enum vc4_vec_tv_mode_id {
VC4_VEC_TV_MODE_NTSC,
VC4_VEC_TV_MODE_NTSC_J,
@@ -192,7 +200,7 @@ enum vc4_vec_tv_mode_id {
};
struct vc4_vec_tv_mode {
- const struct drm_display_mode *mode;
+ unsigned int mode;
u32 config0;
u32 config1;
u32 custom_freq;
@@ -225,43 +233,51 @@ static const struct debugfs_reg32 vec_regs[] = {
VC4_REG32(VEC_DAC_MISC),
};
-static const struct drm_display_mode ntsc_mode = {
- DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500,
- 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0,
- 480, 480 + 7, 480 + 7 + 6, 525, 0,
- DRM_MODE_FLAG_INTERLACE)
-};
-
-static const struct drm_display_mode pal_mode = {
- DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500,
- 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0,
- 576, 576 + 4, 576 + 4 + 6, 625, 0,
- DRM_MODE_FLAG_INTERLACE)
-};
-
static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
- [VC4_VEC_TV_MODE_NTSC] = {
- .mode = &ntsc_mode,
+ {
+ .mode = DRM_MODE_TV_MODE_NTSC,
.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
- [VC4_VEC_TV_MODE_NTSC_J] = {
- .mode = &ntsc_mode,
+ {
+ .mode = DRM_MODE_TV_MODE_NTSC_J,
.config0 = VEC_CONFIG0_NTSC_STD,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
- [VC4_VEC_TV_MODE_PAL] = {
- .mode = &pal_mode,
+ {
+ .mode = DRM_MODE_TV_MODE_PAL,
.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
- [VC4_VEC_TV_MODE_PAL_M] = {
- .mode = &ntsc_mode,
+ {
+ .mode = DRM_MODE_TV_MODE_PAL_M,
.config0 = VEC_CONFIG0_PAL_M_STD,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
};
+static inline const struct vc4_vec_tv_mode *
+vc4_vec_tv_mode_lookup(unsigned int mode)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
+ const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
+
+ if (tv_mode->mode == mode)
+ return tv_mode;
+ }
+
+ return NULL;
+}
+
+static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
+ { VC4_VEC_TV_MODE_NTSC, "NTSC", },
+ { VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
+ { VC4_VEC_TV_MODE_PAL, "PAL", },
+ { VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+};
+
static enum drm_connector_status
vc4_vec_connector_detect(struct drm_connector *connector, bool force)
{
@@ -274,21 +290,74 @@ static void vc4_vec_connector_reset(struct drm_connector
*connector)
drm_atomic_helper_connector_tv_reset(connector);
}
-static int vc4_vec_connector_get_modes(struct drm_connector *connector)
+static int
+vc4_vec_connector_set_property(struct drm_connector *connector,
+ struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t val)
{
- struct drm_connector_state *state = connector->state;
- struct drm_display_mode *mode;
-
- mode = drm_mode_duplicate(connector->dev,
- vc4_vec_tv_modes[state->tv.legacy_mode].mode);
- if (!mode) {
- DRM_ERROR("Failed to create a new display mode\n");
- return -ENOMEM;
+ struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+ if (property != vec->legacy_tv_mode_property)
+ return -EINVAL;
+
+ switch (val) {
+ case VC4_VEC_TV_MODE_NTSC:
+ state->tv.mode = DRM_MODE_TV_MODE_NTSC;
+ break;
+
+ case VC4_VEC_TV_MODE_NTSC_J:
+ state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
+ break;
+
+ case VC4_VEC_TV_MODE_PAL:
+ state->tv.mode = DRM_MODE_TV_MODE_PAL;
+ break;
+
+ case VC4_VEC_TV_MODE_PAL_M:
+ state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
+ break;
+
+ default:
+ return -EINVAL;
}
- drm_mode_probed_add(connector, mode);
+ return 0;
+}
+
+static int
+vc4_vec_connector_get_property(struct drm_connector *connector,
+ const struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t *val)
+{
+ struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+ if (property != vec->legacy_tv_mode_property)
+ return -EINVAL;
+
+ switch (state->tv.mode) {
+ case DRM_MODE_TV_MODE_NTSC:
+ *val = VC4_VEC_TV_MODE_NTSC;
+ break;
+
+ case DRM_MODE_TV_MODE_NTSC_J:
+ *val = VC4_VEC_TV_MODE_NTSC_J;
+ break;
+
+ case DRM_MODE_TV_MODE_PAL:
+ *val = VC4_VEC_TV_MODE_PAL;
+ break;
+
+ case DRM_MODE_TV_MODE_PAL_M:
+ *val = VC4_VEC_TV_MODE_PAL_M;
+ break;
+
+ default:
+ return -EINVAL;
+ }
- return 1;
+ return 0;
}
static const struct drm_connector_funcs vc4_vec_connector_funcs = {
@@ -297,15 +366,19 @@ static const struct drm_connector_funcs
vc4_vec_connector_funcs = {
.reset = vc4_vec_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+ .atomic_get_property = vc4_vec_connector_get_property,
+ .atomic_set_property = vc4_vec_connector_set_property,
};
static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs =
{
- .get_modes = vc4_vec_connector_get_modes,
+ .atomic_check = drm_atomic_helper_connector_tv_check,
+ .get_modes = drm_connector_helper_tv_get_modes,
};
static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
{
struct drm_connector *connector = &vec->connector;
+ struct drm_property *prop;
int ret;
connector->interlace_allowed = true;
@@ -318,8 +391,17 @@ static int vc4_vec_connector_init(struct drm_device *dev,
struct vc4_vec *vec)
drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
drm_object_attach_property(&connector->base,
- dev->mode_config.legacy_tv_mode_property,
- VC4_VEC_TV_MODE_NTSC);
+ dev->mode_config.tv_mode_property,
+ DRM_MODE_TV_MODE_NTSC);
+
+ prop = drm_property_create_enum(dev, 0, "mode",
+ legacy_tv_mode_names,
+ ARRAY_SIZE(legacy_tv_mode_names));
+ if (!prop)
+ return -ENOMEM;
+ vec->legacy_tv_mode_property = prop;
+
+ drm_object_attach_property(&connector->base, prop,
VC4_VEC_TV_MODE_NTSC);
drm_connector_attach_encoder(connector, &vec->encoder.base);
@@ -366,13 +448,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder
*encoder,
struct drm_connector *connector = &vec->connector;
struct drm_connector_state *conn_state
drm_atomic_get_new_connector_state(state, connector);
- const struct vc4_vec_tv_mode *tv_mode -
&vc4_vec_tv_modes[conn_state->tv.legacy_mode];
+ const struct vc4_vec_tv_mode *tv_mode;
int idx, ret;
if (!drm_dev_enter(drm, &idx))
return;
+ tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+ if (!tv_mode)
+ goto err_dev_exit;
+
ret = pm_runtime_get_sync(&vec->pdev->dev);
if (ret < 0) {
DRM_ERROR("Failed to retain power domain: %d\n", ret);
@@ -454,12 +539,10 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder
*encoder,
struct drm_connector_state *conn_state)
{
const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
- const struct vc4_vec_tv_mode *vec_mode;
+ const struct vc4_vec_tv_mode *tv_mode;
- vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
-
- if (conn_state->crtc &&
- !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
+ tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode, mode->htotal);
+ if (!tv_mode)
return -EINVAL;
if (mode->crtc_hdisplay % 4)
@@ -556,13 +639,6 @@ static const struct of_device_id vc4_vec_dt_match[] = {
{ /* sentinel */ },
};
-static const char * const tv_mode_names[] = {
- [VC4_VEC_TV_MODE_NTSC] = "NTSC",
- [VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J",
- [VC4_VEC_TV_MODE_PAL] = "PAL",
- [VC4_VEC_TV_MODE_PAL_M] = "PAL-M",
-};
-
static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -570,9 +646,11 @@ static int vc4_vec_bind(struct device *dev, struct device
*master, void *data)
struct vc4_vec *vec;
int ret;
- ret = drm_mode_create_tv_properties_legacy(drm,
- ARRAY_SIZE(tv_mode_names),
- tv_mode_names);
+ ret = drm_mode_create_tv_properties(drm,
+ BIT(DRM_MODE_TV_MODE_NTSC) |
+ BIT(DRM_MODE_TV_MODE_NTSC_J) |
+ BIT(DRM_MODE_TV_MODE_PAL) |
+ BIT(DRM_MODE_TV_MODE_PAL_M));
if (ret)
return ret;
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 22/23] drm/vc4: vec: Add support for more analog TV standards
From: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):
- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
4.43361875 MHz (the PAL subcarrier frequency). Never used for
broadcasting, but sometimes used as a hack to play NTSC content in PAL
regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
frequency. Another non-standard, non-broadcast mode, used in similar
contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
been broadcast in Eastern Europe and various parts of Africa and Asia.
Uses the same 576i50 timings as PAL.
Also added some comments explaining color subcarrier frequency
registers.
Acked-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v6:
- Support PAL60 again
---
drivers/gpu/drm/vc4/vc4_vec.c | 111 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 107 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index a828fc6fb776..d23dbad3cbf6 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
#define VEC_CONFIG0_YDEL(x) ((x) << 26)
#define VEC_CONFIG0_CDEL_MASK GENMASK(25, 24)
#define VEC_CONFIG0_CDEL(x) ((x) << 24)
+#define VEC_CONFIG0_SECAM_STD BIT(21)
#define VEC_CONFIG0_PBPR_FIL BIT(18)
#define VEC_CONFIG0_CHROMA_GAIN_MASK GENMASK(17, 16)
#define VEC_CONFIG0_CHROMA_GAIN_UNITY (0 << 16)
@@ -76,6 +77,27 @@
#define VEC_SOFT_RESET 0x10c
#define VEC_CLMP0_START 0x144
#define VEC_CLMP0_END 0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC (3579545.[45] Hz) - 0x21F07C1F
+ * PAL (4433618.75 Hz) - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz) - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
#define VEC_FREQ3_2 0x180
#define VEC_FREQ1_0 0x184
@@ -118,6 +140,14 @@
#define VEC_INTERRUPT_CONTROL 0x190
#define VEC_INTERRUPT_STATUS 0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
#define VEC_FCW_SECAM_B 0x198
#define VEC_SECAM_GAIN_VAL 0x19c
@@ -197,10 +227,15 @@ enum vc4_vec_tv_mode_id {
VC4_VEC_TV_MODE_NTSC_J,
VC4_VEC_TV_MODE_PAL,
VC4_VEC_TV_MODE_PAL_M,
+ VC4_VEC_TV_MODE_NTSC_443,
+ VC4_VEC_TV_MODE_PAL_60,
+ VC4_VEC_TV_MODE_PAL_N,
+ VC4_VEC_TV_MODE_SECAM,
};
struct vc4_vec_tv_mode {
unsigned int mode;
+ u16 expected_htotal;
u32 config0;
u32 config1;
u32 custom_freq;
@@ -236,35 +271,68 @@ static const struct debugfs_reg32 vec_regs[] = {
static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
{
.mode = DRM_MODE_TV_MODE_NTSC,
+ .expected_htotal = 858,
.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
+ {
+ .mode = DRM_MODE_TV_MODE_NTSC_443,
+ .expected_htotal = 858,
+ .config0 = VEC_CONFIG0_NTSC_STD,
+ .config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+ .custom_freq = 0x2a098acb,
+ },
{
.mode = DRM_MODE_TV_MODE_NTSC_J,
+ .expected_htotal = 858,
.config0 = VEC_CONFIG0_NTSC_STD,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
{
.mode = DRM_MODE_TV_MODE_PAL,
+ .expected_htotal = 864,
.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
+ {
+ /* PAL-60 */
+ .mode = DRM_MODE_TV_MODE_PAL,
+ .expected_htotal = 858,
+ .config0 = VEC_CONFIG0_PAL_M_STD,
+ .config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+ .custom_freq = 0x2a098acb,
+ },
{
.mode = DRM_MODE_TV_MODE_PAL_M,
+ .expected_htotal = 858,
.config0 = VEC_CONFIG0_PAL_M_STD,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
+ {
+ .mode = DRM_MODE_TV_MODE_PAL_N,
+ .expected_htotal = 864,
+ .config0 = VEC_CONFIG0_PAL_N_STD,
+ .config1 = VEC_CONFIG1_C_CVBS_CVBS,
+ },
+ {
+ .mode = DRM_MODE_TV_MODE_SECAM,
+ .expected_htotal = 864,
+ .config0 = VEC_CONFIG0_SECAM_STD,
+ .config1 = VEC_CONFIG1_C_CVBS_CVBS,
+ .custom_freq = 0x29c71c72,
+ },
};
static inline const struct vc4_vec_tv_mode *
-vc4_vec_tv_mode_lookup(unsigned int mode)
+vc4_vec_tv_mode_lookup(unsigned int mode, u16 htotal)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
- if (tv_mode->mode == mode)
+ if (tv_mode->mode == mode &&
+ tv_mode->expected_htotal == htotal)
return tv_mode;
}
@@ -273,9 +341,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+ { VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
{ VC4_VEC_TV_MODE_PAL, "PAL", },
+ { VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+ { VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+ { VC4_VEC_TV_MODE_SECAM, "SECAM", },
};
static enum drm_connector_status
@@ -306,11 +378,16 @@ vc4_vec_connector_set_property(struct drm_connector
*connector,
state->tv.mode = DRM_MODE_TV_MODE_NTSC;
break;
+ case VC4_VEC_TV_MODE_NTSC_443:
+ state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+ break;
+
case VC4_VEC_TV_MODE_NTSC_J:
state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
break;
case VC4_VEC_TV_MODE_PAL:
+ case VC4_VEC_TV_MODE_PAL_60:
state->tv.mode = DRM_MODE_TV_MODE_PAL;
break;
@@ -318,6 +395,14 @@ vc4_vec_connector_set_property(struct drm_connector
*connector,
state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
break;
+ case VC4_VEC_TV_MODE_PAL_N:
+ state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+ break;
+
+ case VC4_VEC_TV_MODE_SECAM:
+ state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+ break;
+
default:
return -EINVAL;
}
@@ -341,6 +426,10 @@ vc4_vec_connector_get_property(struct drm_connector
*connector,
*val = VC4_VEC_TV_MODE_NTSC;
break;
+ case DRM_MODE_TV_MODE_NTSC_443:
+ *val = VC4_VEC_TV_MODE_NTSC_443;
+ break;
+
case DRM_MODE_TV_MODE_NTSC_J:
*val = VC4_VEC_TV_MODE_NTSC_J;
break;
@@ -353,6 +442,14 @@ vc4_vec_connector_get_property(struct drm_connector
*connector,
*val = VC4_VEC_TV_MODE_PAL_M;
break;
+ case DRM_MODE_TV_MODE_PAL_N:
+ *val = VC4_VEC_TV_MODE_PAL_N;
+ break;
+
+ case DRM_MODE_TV_MODE_SECAM:
+ *val = VC4_VEC_TV_MODE_SECAM;
+ break;
+
default:
return -EINVAL;
}
@@ -448,13 +545,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder
*encoder,
struct drm_connector *connector = &vec->connector;
struct drm_connector_state *conn_state
drm_atomic_get_new_connector_state(state, connector);
+ struct drm_display_mode *adjusted_mode +
&encoder->crtc->state->adjusted_mode;
const struct vc4_vec_tv_mode *tv_mode;
int idx, ret;
if (!drm_dev_enter(drm, &idx))
return;
- tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+ tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode,
+ adjusted_mode->htotal);
if (!tv_mode)
goto err_dev_exit;
@@ -648,9 +748,12 @@ static int vc4_vec_bind(struct device *dev, struct device
*master, void *data)
ret = drm_mode_create_tv_properties(drm,
BIT(DRM_MODE_TV_MODE_NTSC) |
+ BIT(DRM_MODE_TV_MODE_NTSC_443) |
BIT(DRM_MODE_TV_MODE_NTSC_J) |
BIT(DRM_MODE_TV_MODE_PAL) |
- BIT(DRM_MODE_TV_MODE_PAL_M));
+ BIT(DRM_MODE_TV_MODE_PAL_M) |
+ BIT(DRM_MODE_TV_MODE_PAL_N) |
+ BIT(DRM_MODE_TV_MODE_SECAM));
if (ret)
return ret;
--
b4 0.11.0-dev-99e3a
Maxime Ripard
2022-Nov-07 14:16 UTC
[Nouveau] [PATCH v7 23/23] drm/sun4i: tv: Convert to the new TV mode property
Now that the core can deal fine with analog TV modes, let's convert the
sun4i TV driver to leverage those new features.
Acked-by: Noralf Tr?nnes <noralf at tronnes.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec at gmail.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v6:
- Convert to new get_modes helper
Changes in v5:
- Removed the count variable in get_modes
- Removed spurious vc4 change
---
drivers/gpu/drm/sun4i/sun4i_tv.c | 141 ++++++++++-----------------------------
1 file changed, 34 insertions(+), 107 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tv.c b/drivers/gpu/drm/sun4i/sun4i_tv.c
index c65f0a89b6b0..9625a00a48ba 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tv.c
@@ -141,23 +141,14 @@ struct resync_parameters {
struct tv_mode {
char *name;
+ unsigned int tv_mode;
+
u32 mode;
u32 chroma_freq;
u16 back_porch;
u16 front_porch;
- u16 line_number;
u16 vblank_level;
- u32 hdisplay;
- u16 hfront_porch;
- u16 hsync_len;
- u16 hback_porch;
-
- u32 vdisplay;
- u16 vfront_porch;
- u16 vsync_len;
- u16 vback_porch;
-
bool yc_en;
bool dac3_en;
bool dac_bit25_en;
@@ -213,7 +204,7 @@ static const struct resync_parameters pal_resync_parameters
= {
static const struct tv_mode tv_modes[] = {
{
- .name = "NTSC",
+ .tv_mode = DRM_MODE_TV_MODE_NTSC,
.mode = SUN4I_TVE_CFG0_RES_480i,
.chroma_freq = 0x21f07c1f,
.yc_en = true,
@@ -222,17 +213,6 @@ static const struct tv_mode tv_modes[] = {
.back_porch = 118,
.front_porch = 32,
- .line_number = 525,
-
- .hdisplay = 720,
- .hfront_porch = 18,
- .hsync_len = 2,
- .hback_porch = 118,
-
- .vdisplay = 480,
- .vfront_porch = 26,
- .vsync_len = 2,
- .vback_porch = 17,
.vblank_level = 240,
@@ -242,23 +222,12 @@ static const struct tv_mode tv_modes[] = {
.resync_params = &ntsc_resync_parameters,
},
{
- .name = "PAL",
+ .tv_mode = DRM_MODE_TV_MODE_PAL,
.mode = SUN4I_TVE_CFG0_RES_576i,
.chroma_freq = 0x2a098acb,
.back_porch = 138,
.front_porch = 24,
- .line_number = 625,
-
- .hdisplay = 720,
- .hfront_porch = 3,
- .hsync_len = 2,
- .hback_porch = 139,
-
- .vdisplay = 576,
- .vfront_porch = 28,
- .vsync_len = 2,
- .vback_porch = 19,
.vblank_level = 252,
@@ -276,63 +245,21 @@ drm_encoder_to_sun4i_tv(struct drm_encoder *encoder)
encoder);
}
-/*
- * FIXME: If only the drm_display_mode private field was usable, this
- * could go away...
- *
- * So far, it doesn't seem to be preserved when the mode is passed by
- * to mode_set for some reason.
- */
-static const struct tv_mode *sun4i_tv_find_tv_by_mode(const struct
drm_display_mode *mode)
+static const struct tv_mode *
+sun4i_tv_find_tv_by_mode(unsigned int mode)
{
int i;
- /* First try to identify the mode by name */
for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
const struct tv_mode *tv_mode = &tv_modes[i];
- DRM_DEBUG_DRIVER("Comparing mode %s vs %s",
- mode->name, tv_mode->name);
-
- if (!strcmp(mode->name, tv_mode->name))
- return tv_mode;
- }
-
- /* Then by number of lines */
- for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
- const struct tv_mode *tv_mode = &tv_modes[i];
-
- DRM_DEBUG_DRIVER("Comparing mode %s vs %s (X: %d vs %d)",
- mode->name, tv_mode->name,
- mode->vdisplay, tv_mode->vdisplay);
-
- if (mode->vdisplay == tv_mode->vdisplay)
+ if (tv_mode->tv_mode == mode)
return tv_mode;
}
return NULL;
}
-static void sun4i_tv_mode_to_drm_mode(const struct tv_mode *tv_mode,
- struct drm_display_mode *mode)
-{
- DRM_DEBUG_DRIVER("Creating mode %s\n", mode->name);
-
- mode->type = DRM_MODE_TYPE_DRIVER;
- mode->clock = 13500;
- mode->flags = DRM_MODE_FLAG_INTERLACE;
-
- mode->hdisplay = tv_mode->hdisplay;
- mode->hsync_start = mode->hdisplay + tv_mode->hfront_porch;
- mode->hsync_end = mode->hsync_start + tv_mode->hsync_len;
- mode->htotal = mode->hsync_end + tv_mode->hback_porch;
-
- mode->vdisplay = tv_mode->vdisplay;
- mode->vsync_start = mode->vdisplay + tv_mode->vfront_porch;
- mode->vsync_end = mode->vsync_start + tv_mode->vsync_len;
- mode->vtotal = mode->vsync_end + tv_mode->vback_porch;
-}
-
static void sun4i_tv_disable(struct drm_encoder *encoder,
struct drm_atomic_state *state)
{
@@ -356,7 +283,11 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state drm_atomic_get_new_crtc_state(state,
encoder->crtc);
struct drm_display_mode *mode = &crtc_state->mode;
- const struct tv_mode *tv_mode = sun4i_tv_find_tv_by_mode(mode);
+ struct drm_connector *connector = &tv->connector;
+ struct drm_connector_state *conn_state +
drm_atomic_get_new_connector_state(state, connector);
+ const struct tv_mode *tv_mode +
sun4i_tv_find_tv_by_mode(conn_state->tv.mode);
DRM_DEBUG_DRIVER("Enabling the TV Output\n");
@@ -404,7 +335,7 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
/* Set the lines setup */
regmap_write(tv->regs, SUN4I_TVE_LINE_REG,
SUN4I_TVE_LINE_FIRST(22) |
- SUN4I_TVE_LINE_NUMBER(tv_mode->line_number));
+ SUN4I_TVE_LINE_NUMBER(mode->vtotal));
regmap_write(tv->regs, SUN4I_TVE_LEVEL_REG,
SUN4I_TVE_LEVEL_BLANK(tv_mode->video_levels->blank) |
@@ -465,37 +396,21 @@ static const struct drm_encoder_helper_funcs
sun4i_tv_helper_funcs = {
.atomic_enable = sun4i_tv_enable,
};
-static int sun4i_tv_comp_get_modes(struct drm_connector *connector)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
- struct drm_display_mode *mode;
- const struct tv_mode *tv_mode = &tv_modes[i];
-
- mode = drm_mode_create(connector->dev);
- if (!mode) {
- DRM_ERROR("Failed to create a new display mode\n");
- return 0;
- }
-
- strcpy(mode->name, tv_mode->name);
-
- sun4i_tv_mode_to_drm_mode(tv_mode, mode);
- drm_mode_probed_add(connector, mode);
- }
-
- return i;
-}
-
static const struct drm_connector_helper_funcs
sun4i_tv_comp_connector_helper_funcs = {
- .get_modes = sun4i_tv_comp_get_modes,
+ .atomic_check = drm_atomic_helper_connector_tv_check,
+ .get_modes = drm_connector_helper_tv_get_modes,
};
+static void sun4i_tv_connector_reset(struct drm_connector *connector)
+{
+ drm_atomic_helper_connector_reset(connector);
+ drm_atomic_helper_connector_tv_reset(connector);
+}
+
static const struct drm_connector_funcs sun4i_tv_comp_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = drm_connector_cleanup,
- .reset = drm_atomic_helper_connector_reset,
+ .reset = sun4i_tv_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
@@ -587,8 +502,20 @@ static int sun4i_tv_bind(struct device *dev, struct device
*master,
drm_connector_attach_encoder(&tv->connector, &tv->encoder);
+ ret = drm_mode_create_tv_properties(drm,
+ BIT(DRM_MODE_TV_MODE_NTSC) |
+ BIT(DRM_MODE_TV_MODE_PAL));
+ if (ret)
+ goto err_cleanup_connector;
+
+ drm_object_attach_property(&tv->connector.base,
+ drm->mode_config.tv_mode_property,
+ DRM_MODE_TV_MODE_NTSC);
+
return 0;
+err_cleanup_connector:
+ drm_connector_cleanup(&tv->connector);
err_cleanup_encoder:
drm_encoder_cleanup(&tv->encoder);
err_disable_clk:
--
b4 0.11.0-dev-99e3a
One can switch from NTSC to PAL now using (on vc4) modetest -M vc4 -s 53:720x480i -w 53:'TV mode':1 # NTSC modetest -M vc4 -s 53:720x576i -w 53:'TV mode':4 # PAL NTSC should be 640x480i, not 720. It will probably work on most TV's, but NTSC by the spec is 640x480i. On Mon, Nov 7, 2022 at 3:16 PM Maxime Ripard <maxime at cerno.tech> wrote:> Hi, > > Here's a series aiming at improving the command line named modes support, > and more importantly how we deal with all the analog TV variants. > > The named modes support were initially introduced to allow to specify the > analog TV mode to be used. > > However, this was causing multiple issues: > > * The mode name parsed on the command line was passed directly to the > driver, which had to figure out which mode it was suppose to match; > > * Figuring that out wasn't really easy, since the video= argument or what > the userspace might not even have a name in the first place, but > instead could have passed a mode with the same timings; > > * The fallback to matching on the timings was mostly working as long as > we were supporting one 525 lines (most likely NSTC) and one 625 lines > (PAL), but couldn't differentiate between two modes with the same > timings (NTSC vs PAL-M vs NSTC-J for example); > > * There was also some overlap with the tv mode property registered by > drm_mode_create_tv_properties(), but named modes weren't interacting > with that property at all. > > * Even though that property was generic, its possible values were > specific to each drivers, which made some generic support difficult. > > Thus, I chose to tackle in multiple steps: > > * A new TV mode property was introduced, with generic values, each driver > reporting through a bitmask what standard it supports to the userspace; > > * This option was added to the command line parsing code to be able to > specify it on the kernel command line, and new atomic_check and reset > helpers were created to integrate properly into atomic KMS; > > * The named mode parsing code is now creating a proper display mode for > the given named mode, and the TV standard will thus be part of the > connector state; > > * Two drivers were converted and tested for now (vc4 and sun4i), with > some backward compatibility code to translate the old TV mode to the > new TV mode; > > Unit tests were created along the way. > > One can switch from NTSC to PAL now using (on vc4) > > modetest -M vc4 -s 53:720x480i -w 53:'TV mode':1 # NTSC > modetest -M vc4 -s 53:720x576i -w 53:'TV mode':4 # PAL > > Let me know what you think, > Maxime > > To: David Airlie <airlied at linux.ie> > To: Daniel Vetter <daniel at ffwll.ch> > To: Maarten Lankhorst <maarten.lankhorst at linux.intel.com> > To: Maxime Ripard <mripard at kernel.org> > To: Thomas Zimmermann <tzimmermann at suse.de> > To: Emma Anholt <emma at anholt.net> > To: Jani Nikula <jani.nikula at linux.intel.com> > To: Joonas Lahtinen <joonas.lahtinen at linux.intel.com> > To: Rodrigo Vivi <rodrigo.vivi at intel.com> > To: Tvrtko Ursulin <tvrtko.ursulin at linux.intel.com> > To: Ben Skeggs <bskeggs at redhat.com> > To: Karol Herbst <kherbst at redhat.com> > To: Lyude Paul <lyude at redhat.com> > To: Chen-Yu Tsai <wens at csie.org> > To: Jernej Skrabec <jernej.skrabec at gmail.com> > To: Samuel Holland <samuel at sholland.org> > Cc: Geert Uytterhoeven <geert at linux-m68k.org> > Cc: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com> > Cc: "Noralf Tr?nnes" <noralf at tronnes.org> > Cc: Dave Stevenson <dave.stevenson at raspberrypi.com> > Cc: Dom Cobley <dom at raspberrypi.com> > Cc: Phil Elwell <phil at raspberrypi.com> > Cc: <dri-devel at lists.freedesktop.org> > Cc: linux-kernel at vger.kernel.org > Cc: intel-gfx at lists.freedesktop.org > Cc: nouveau at lists.freedesktop.org > Cc: linux-arm-kernel at lists.infradead.org > Cc: linux-sunxi at lists.linux.dev > Cc: Hans de Goede <hdegoede at redhat.com> > Signed-off-by: Maxime Ripard <maxime at cerno.tech> > > --- > Changes in v7: > - Switch to another implementation of get_modes from Noralf > - Made more checks in VEC's atomic_check > - Fixed typo in a commit log > - Checked for tv_mode_specified in > drm_mode_parse_command_line_for_connector > - Rebased on drm-misc-next-2022-11-03 > - Link to v6: > https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f at cerno.tech > > Changes in v6: > - Add and convert to a new get_modes helper to create the PAL and NTSC > modes in > the proper order, with the right preferred mode flag, depending on the > driver > capabilities and defaults. > - Support PAL60 > - Renamed tests to be consistent with DRM tests naming convention > - Simplified a bit the named mode parsing code > - Add a tv_mode_specified field > - Return 0 in get_modes implementations instead of error codes > - Link to v5: > https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b at cerno.tech > > Changes in v5: > - Dropped TV Standard documentation removal > - Switched the TV Mode documentation from CSV to actual documentation > - Switched to kunit assertions where possible > - Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., > NULL) > - Shuffled a bit the introduction of > drm_client_modeset_connector_get_modes between patches > - Renamed tv_mode_names to legacy_tv_mode_names > - Removed the count variable in sun4i_tv_comp_get_modes > - Rebased on top of current drm-misc-next > - Link to v4: > https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782 at cerno.tech > > Changes in v4: > - Removed the unused TV Standard property documentation > - Added the TV Mode property documentation to kms-properties.csv > - Fixed the documentation of drm_mode_create_tv_properties() > - Removed DRM_MODE_TV_MODE_NONE > - Reworded the line length check comment in drm_mode_analog_tv tests > - Switched to HZ_PER_KHZ in drm_mode_analog_tv tests > - Reworked drm_mode_analog_tv to fill our mode using the previously > computed > timings > - Added the command-line option documentation to modedb.rst > - Improved the Kunit helpers cleanup > - Moved the subconnector documentation renaming to the proper patch > - Added the various review tags > - Removed the count variable in vc4_vec_connector_get_modes > - Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict > - Folded all the named mode parsing improvements in a single patch > - Link to v3: > https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90 at cerno.tech > > Changes in v3: > - Applied some of the fixes to vc4 and sun4i > - Renamed the old TV mode property to legacy_mode > - Fixed a bunch of bisection errors > - Removed most of the redundant TV modes > - Added a new None TV mode to not fall back on NTSC by mistake > - Fixed the mode generation function to match better what is expected > - Added some logging to the mode generation function > - Split the improvements to the named mode parsing logic into separate > patches > - Added more checks to the TV atomic_check helper > - Link to v2: > https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7 at cerno.tech/ > > Changes in v2: > - Kept the older TV mode property as legacy so we can keep the old drivers > functional > - Renamed the tv_norm property to tv_mode > - Added a function to create PAL and NTSC compatible display modes > - Added some helpers to instantiate a mock DRM device in Kunit > - More Kunit tests > - Removed the HD analog TV modes > - Renamed some of the tests > - Renamed some of the named modes > - Fixed typos in commit logs > - Added the various tags > - Link to v1: > https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097 at cerno.tech/ > > --- > Mateusz Kwiatkowski (2): > drm/vc4: vec: Check for VEC output constraints > drm/vc4: vec: Add support for more analog TV standards > > Maxime Ripard (20): > drm/tests: Add Kunit Helpers > drm/connector: Rename legacy TV property > drm/connector: Only register TV mode property if present > drm/connector: Rename drm_mode_create_tv_properties > drm/connector: Add TV standard property > drm/modes: Add a function to generate analog display modes > drm/client: Add some tests for drm_connector_pick_cmdline_mode() > drm/modes: Move named modes parsing to a separate function > drm/modes: Switch to named mode descriptors > drm/modes: Fill drm_cmdline mode from named modes > drm/connector: Add pixel clock to cmdline mode > drm/connector: Add a function to lookup a TV mode by its name > drm/modes: Introduce the tv_mode property as a command-line option > drm/modes: Properly generate a drm_display_mode from a named mode > drm/modes: Introduce more named modes > drm/atomic-helper: Add a TV properties reset helper > drm/atomic-helper: Add an analog TV atomic_check implementation > drm/vc4: vec: Use TV Reset implementation > drm/vc4: vec: Convert to the new TV mode property > drm/sun4i: tv: Convert to the new TV mode property > > Noralf Tr?nnes (1): > drm/probe-helper: Provide a TV get_modes helper > > Documentation/fb/modedb.rst | 2 + > Documentation/gpu/drm-kms.rst | 6 + > drivers/gpu/drm/drm_atomic_state_helper.c | 124 +++++ > drivers/gpu/drm/drm_atomic_uapi.c | 4 + > drivers/gpu/drm/drm_client_modeset.c | 4 + > drivers/gpu/drm/drm_connector.c | 173 ++++++- > drivers/gpu/drm/drm_modes.c | 639 > +++++++++++++++++++++++- > drivers/gpu/drm/drm_probe_helper.c | 97 ++++ > drivers/gpu/drm/gud/gud_connector.c | 10 +- > drivers/gpu/drm/i2c/ch7006_drv.c | 6 +- > drivers/gpu/drm/i915/display/intel_tv.c | 5 +- > drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 6 +- > drivers/gpu/drm/sun4i/sun4i_tv.c | 141 ++---- > drivers/gpu/drm/tests/Makefile | 3 + > drivers/gpu/drm/tests/drm_client_modeset_test.c | 229 +++++++++ > drivers/gpu/drm/tests/drm_cmdline_parser_test.c | 67 +++ > drivers/gpu/drm/tests/drm_connector_test.c | 90 ++++ > drivers/gpu/drm/tests/drm_kunit_helpers.c | 61 +++ > drivers/gpu/drm/tests/drm_kunit_helpers.h | 9 + > drivers/gpu/drm/tests/drm_modes_test.c | 144 ++++++ > drivers/gpu/drm/vc4/vc4_vec.c | 342 +++++++++++-- > include/drm/drm_atomic_state_helper.h | 4 + > include/drm/drm_connector.h | 89 +++- > include/drm/drm_mode_config.h | 12 +- > include/drm/drm_modes.h | 17 + > include/drm/drm_probe_helper.h | 1 + > 26 files changed, 2081 insertions(+), 204 deletions(-) > --- > base-commit: 3b536e43463ed91b7bf9acec1eb4da0bc677dc43 > change-id: 20220728-rpi-analog-tv-properties-0914dfcee460 > > Best regards, > -- > Maxime Ripard <maxime at cerno.tech> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.freedesktop.org/archives/nouveau/attachments/20221108/0a5bbde7/attachment-0001.htm>