Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 00/33] drm: Analog TV Improvements
Hi,
Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.
The named modes support were initially introduced to allow to specify the
analog TV mode to be used.
However, this was causing multiple issues:
* The mode name parsed on the command line was passed directly to the
driver, which had to figure out which mode it was suppose to match;
* Figuring that out wasn't really easy, since the video= argument or what
the userspace might not even have a name in the first place, but
instead could have passed a mode with the same timings;
* The fallback to matching on the timings was mostly working as long as
we were supporting one 525 lines (most likely NSTC) and one 625 lines
(PAL), but couldn't differentiate between two modes with the same
timings (NTSC vs PAL-M vs NSTC-J for example);
* There was also some overlap with the tv mode property registered by
drm_mode_create_tv_properties(), but named modes weren't interacting
with that property at all.
* Even though that property was generic, its possible values were
specific to each drivers, which made some generic support difficult.
Thus, I chose to tackle in multiple steps:
* A new TV mode property was introduced, with generic values, each driver
reporting through a bitmask what standard it supports to the userspace;
* This option was added to the command line parsing code to be able to
specify it on the kernel command line, and new atomic_check and reset
helpers were created to integrate properly into atomic KMS;
* The named mode parsing code is now creating a proper display mode for
the given named mode, and the TV standard will thus be part of the
connector state;
* Two drivers were converted and tested for now (vc4 and sun4i), with
some backward compatibility code to translate the old TV mode to the
new TV mode;
Unit tests were created along the way.
One can switch from NTSC to PAL now using (on vc4)
modetest -M vc4 -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4 -s 53:720x576i -w 53:'TV mode':4 # PAL
Let me know what you think,
Maxime
To: David Airlie <airlied at linux.ie>
To: Daniel Vetter <daniel at ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
To: Maxime Ripard <mripard at kernel.org>
To: Thomas Zimmermann <tzimmermann at suse.de>
To: Emma Anholt <emma at anholt.net>
To: Jani Nikula <jani.nikula at linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi at intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin at linux.intel.com>
To: Ben Skeggs <bskeggs at redhat.com>
To: Karol Herbst <kherbst at redhat.com>
To: Lyude Paul <lyude at redhat.com>
To: Chen-Yu Tsai <wens at csie.org>
To: Jernej Skrabec <jernej.skrabec at gmail.com>
To: Samuel Holland <samuel at sholland.org>
Cc: Geert Uytterhoeven <geert at linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
Cc: "Noralf Tr?nnes" <noralf at tronnes.org>
Cc: Dave Stevenson <dave.stevenson at raspberrypi.com>
Cc: Dom Cobley <dom at raspberrypi.com>
Cc: Phil Elwell <phil at raspberrypi.com>
Cc: <dri-devel at lists.freedesktop.org>
Cc: linux-kernel at vger.kernel.org
Cc: intel-gfx at lists.freedesktop.org
Cc: nouveau at lists.freedesktop.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-sunxi at lists.linux.dev
Cc: Hans de Goede <hdegoede at redhat.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2:
https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7
at cerno.tech/
Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers
functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1:
https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097
at cerno.tech/
---
Geert Uytterhoeven (1):
drm/modes: parse_cmdline: Add support for named modes containing dashes
Mateusz Kwiatkowski (3):
drm/vc4: vec: Fix definition of PAL-M mode
drm/vc4: vec: Check for VEC output constraints
drm/vc4: vec: Add support for more analog TV standards
Maxime Ripard (29):
drm/tests: Order Kunit tests in Makefile
drm/tests: Add Kunit Helpers
drm/atomic-helper: Rename drm_atomic_helper_connector_tv_reset to avoid
ambiguity
drm/connector: Rename subconnector state variable
drm/atomic: Add TV subconnector property to get/set_property
drm/connector: Rename legacy TV property
drm/connector: Only register TV mode property if present
drm/connector: Rename drm_mode_create_tv_properties
drm/connector: Add TV standard property
drm/modes: Add a function to generate analog display modes
drm/modes: Only consider bpp and refresh before options
drm/client: Add some tests for drm_connector_pick_cmdline_mode()
drm/modes: Move named modes parsing to a separate function
drm/modes: Bail out of named mode parsing if empty
drm/modes: Bail out of named mode parsing early if it's a number
drm/modes: Bail out of named mode parsing early if it's an option
drm/modes: Bail out of named mode parsing early if it's a status
drm/modes: Switch to named mode descriptors
drm/modes: Fill drm_cmdline mode from named modes
drm/connector: Add pixel clock to cmdline mode
drm/connector: Add a function to lookup a TV mode by its name
drm/modes: Introduce the tv_mode property as a command-line option
drm/modes: Properly generate a drm_display_mode from a named mode
drm/modes: Introduce more named modes
drm/atomic-helper: Add a TV properties reset helper
drm/atomic-helper: Add an analog TV atomic_check implementation
drm/vc4: vec: Use TV Reset implementation
drm/vc4: vec: Convert to the new TV mode property
drm/sun4i: tv: Convert to the new TV mode property
drivers/gpu/drm/drm_atomic_state_helper.c | 128 ++++-
drivers/gpu/drm/drm_atomic_uapi.c | 8 +
drivers/gpu/drm/drm_client_modeset.c | 4 +
drivers/gpu/drm/drm_connector.c | 111 +++-
drivers/gpu/drm/drm_modes.c | 658 +++++++++++++++++++++++-
drivers/gpu/drm/gud/gud_connector.c | 12 +-
drivers/gpu/drm/i2c/ch7006_drv.c | 6 +-
drivers/gpu/drm/i915/display/intel_tv.c | 5 +-
drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 6 +-
drivers/gpu/drm/sun4i/sun4i_tv.c | 148 ++----
drivers/gpu/drm/tests/Makefile | 16 +-
drivers/gpu/drm/tests/drm_client_modeset_test.c | 239 +++++++++
drivers/gpu/drm/tests/drm_cmdline_parser_test.c | 67 +++
drivers/gpu/drm/tests/drm_kunit_helpers.c | 54 ++
drivers/gpu/drm/tests/drm_kunit_helpers.h | 9 +
drivers/gpu/drm/tests/drm_modes_test.c | 136 +++++
drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +-
drivers/gpu/drm/vc4/vc4_vec.c | 339 ++++++++++--
include/drm/drm_atomic_state_helper.h | 4 +
include/drm/drm_connector.h | 92 +++-
include/drm/drm_mode_config.h | 12 +-
include/drm/drm_modes.h | 17 +
22 files changed, 1866 insertions(+), 207 deletions(-)
---
base-commit: 9f5ef9111a4c973a69f9ba22ac73f1f9c634baf6
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460
Best regards,
--
Maxime Ripard <maxime at cerno.tech>
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 01/33] drm/tests: Order Kunit tests in Makefile
Since we've recently added a ton of tests, the list starts to be a bit of a mess and creates unneeded conflicts. Let's order it alphabetically. Signed-off-by: Maxime Ripard <maxime at cerno.tech> diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile index 91b70f7d2769..2d9f49b62ecb 100644 --- a/drivers/gpu/drm/tests/Makefile +++ b/drivers/gpu/drm/tests/Makefile @@ -1,5 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_DRM_KUNIT_TEST) += drm_format_helper_test.o drm_damage_helper_test.o \ - drm_cmdline_parser_test.o drm_rect_test.o drm_format_test.o drm_plane_helper_test.o \ - drm_dp_mst_helper_test.o drm_framebuffer_test.o drm_buddy_test.o drm_mm_test.o +obj-$(CONFIG_DRM_KUNIT_TEST) += \ + drm_buddy_test.o \ + drm_cmdline_parser_test.o \ + drm_damage_helper_test.o \ + drm_dp_mst_helper_test.o \ + drm_format_helper_test.o \ + drm_format_test.o \ + drm_framebuffer_test.o \ + drm_mm_test.o \ + drm_plane_helper_test.o \ + drm_rect_test.o -- b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 02/33] drm/tests: Add Kunit Helpers
As the number of kunit tests in KMS grows further, we start to have
multiple test suites that, for example, need to register a mock DRM
driver to interact with the KMS function they are supposed to test.
Let's add a file meant to provide those kind of helpers to avoid
duplication.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index 2d9f49b62ecb..b29ef1085cad 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
drm_format_helper_test.o \
drm_format_test.o \
drm_framebuffer_test.o \
+ drm_kunit_helpers.o \
drm_mm_test.o \
drm_plane_helper_test.o \
drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.c
b/drivers/gpu/drm/tests/drm_kunit_helpers.c
new file mode 100644
index 000000000000..7ebd620481c1
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.c
@@ -0,0 +1,54 @@
+#include <drm/drm_drv.h>
+#include <drm/drm_managed.h>
+
+#include <linux/device.h>
+
+static const struct drm_mode_config_funcs drm_mode_config_funcs = {
+};
+
+static const struct drm_driver drm_mode_driver = {
+};
+
+static void drm_kunit_free_device(struct drm_device *drm, void *ptr)
+{
+ struct device *dev = ptr;
+
+ root_device_unregister(dev);
+}
+
+struct drm_device *drm_kunit_device_init(const char *name)
+{
+ struct drm_device *drm;
+ struct device *dev;
+ int ret;
+
+ dev = root_device_register(name);
+ if (IS_ERR(dev))
+ return ERR_CAST(dev);
+
+ drm = drm_dev_alloc(&drm_mode_driver, dev);
+ if (IS_ERR(drm)) {
+ root_device_unregister(dev);
+ return ERR_CAST(drm);
+ }
+ drm->mode_config.funcs = &drm_mode_config_funcs;
+
+ ret = drmm_add_action_or_reset(drm, drm_kunit_free_device, dev);
+ if (ret)
+ goto err_put_device;
+
+ ret = drmm_mode_config_init(drm);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return drm;
+
+err_put_device:
+ drm_dev_put(drm);
+ return ERR_PTR(ret);
+}
+
+void drm_kunit_device_exit(struct drm_device *drm)
+{
+ drm_dev_put(drm);
+}
diff --git a/drivers/gpu/drm/tests/drm_kunit_helpers.h
b/drivers/gpu/drm/tests/drm_kunit_helpers.h
new file mode 100644
index 000000000000..5015a327a8c1
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_helpers.h
@@ -0,0 +1,9 @@
+#ifndef DRM_KUNIT_HELPERS_H_
+#define DRM_KUNIT_HELPERS_H_
+
+struct drm_device;
+
+struct drm_device *drm_kunit_device_init(const char *name);
+void drm_kunit_device_exit(struct drm_device *drm);
+
+#endif // DRM_KUNIT_HELPERS_H_
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 03/33] drm/atomic-helper: Rename drm_atomic_helper_connector_tv_reset to avoid ambiguity
We currently have two sets of TV properties.
The first one is there to deal with analog TV properties, creating
properties such as the TV mode, subconnectors, saturation, hue and so on.
It's created by calling the drm_mode_create_tv_properties() function.
The second one is there to deal with properties that might be useful on a
TV, creating the overscan margins for example. It's created by calling the
drm_mode_create_tv_margin_properties().
However, we also have a drm_atomic_helper_connector_tv_reset() function
that will reset the TV margin properties to their default values, and thus
is supposed to be called for the latter set. This creates an ambiguity due
to the inconsistent naming.
We can thus rename the drm_atomic_helper_connector_tv_reset() function to
drm_atomic_helper_connector_tv_margins_reset() to remove that ambiguity
and hopefully make it more obvious.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c
b/drivers/gpu/drm/drm_atomic_state_helper.c
index bf31b9d92094..dfb57217253b 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -464,12 +464,12 @@ void drm_atomic_helper_connector_reset(struct
drm_connector *connector)
EXPORT_SYMBOL(drm_atomic_helper_connector_reset);
/**
- * drm_atomic_helper_connector_tv_reset - Resets TV connector properties
+ * drm_atomic_helper_connector_tv_margins_reset - Resets TV connector
properties
* @connector: DRM connector
*
* Resets the TV-related properties attached to a connector.
*/
-void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
+void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector
*connector)
{
struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
struct drm_connector_state *state = connector->state;
@@ -479,7 +479,7 @@ void drm_atomic_helper_connector_tv_reset(struct
drm_connector *connector)
state->tv.margins.top = cmdline->tv_margins.top;
state->tv.margins.bottom = cmdline->tv_margins.bottom;
}
-EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_margins_reset);
/**
* __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
diff --git a/drivers/gpu/drm/gud/gud_connector.c
b/drivers/gpu/drm/gud/gud_connector.c
index d0addd478815..fa636206f232 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -355,7 +355,7 @@ static void gud_connector_reset(struct drm_connector
*connector)
drm_atomic_helper_connector_reset(connector);
connector->state->tv = gconn->initial_tv_state;
/* Set margins from command line */
- drm_atomic_helper_connector_tv_reset(connector);
+ drm_atomic_helper_connector_tv_margins_reset(connector);
if (gconn->initial_brightness >= 0)
connector->state->tv.brightness = gconn->initial_brightness;
}
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 4d3ff51ad2a8..fe01ca5a07d3 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -396,7 +396,7 @@ static void vc4_hdmi_connector_reset(struct drm_connector
*connector)
new_state->base.max_bpc = 8;
new_state->base.max_requested_bpc = 8;
new_state->output_format = VC4_HDMI_OUTPUT_RGB;
- drm_atomic_helper_connector_tv_reset(connector);
+ drm_atomic_helper_connector_tv_margins_reset(connector);
}
static struct drm_connector_state *
diff --git a/include/drm/drm_atomic_state_helper.h
b/include/drm/drm_atomic_state_helper.h
index 3f8f1d627f7c..192766656b88 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -70,7 +70,7 @@ void __drm_atomic_helper_connector_state_reset(struct
drm_connector_state *conn_
void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
struct drm_connector_state *conn_state);
void drm_atomic_helper_connector_reset(struct drm_connector *connector);
-void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
+void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector
*connector);
void
__drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,
struct drm_connector_state *state);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 248206bbd975..23112f0c11cf 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -692,7 +692,7 @@ struct drm_connector_tv_margins {
/**
* struct drm_tv_connector_state - TV connector related states
- * @subconnector: selected subconnector
+ * @select_subconnector: selected subconnector
* @margins: TV margins
* @mode: TV mode
* @brightness: brightness in percent
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 04/33] drm/connector: Rename subconnector state variable
There is two TV subconnector related properties registered by
drm_mode_create_tv_properties(): subconnector and select subconnector.
While the select subconnector property is stored in the kernel by the
drm_tv_connector_state structure, the subconnector property isn't stored
anywhere.
Worse, the select subconnector property is stored in a field called
subconnector, creating some ambiguity about which property content we're
accessing.
Let's rename that field to one called select_subconnector to make it move
obvious what it's about.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c
b/drivers/gpu/drm/drm_atomic_uapi.c
index 79730fa1dd8e..c74c78a28171 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -687,7 +687,7 @@ static int drm_atomic_connector_set_property(struct
drm_connector *connector,
*/
return -EINVAL;
} else if (property == config->tv_select_subconnector_property) {
- state->tv.subconnector = val;
+ state->tv.select_subconnector = val;
} else if (property == config->tv_left_margin_property) {
state->tv.margins.left = val;
} else if (property == config->tv_right_margin_property) {
@@ -795,7 +795,7 @@ drm_atomic_connector_get_property(struct drm_connector
*connector,
else
*val = connector->dpms;
} else if (property == config->tv_select_subconnector_property) {
- *val = state->tv.subconnector;
+ *val = state->tv.select_subconnector;
} else if (property == config->tv_left_margin_property) {
*val = state->tv.margins.left;
} else if (property == config->tv_right_margin_property) {
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 23112f0c11cf..60b5662dec7c 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -703,7 +703,7 @@ struct drm_connector_tv_margins {
* @hue: hue in percent
*/
struct drm_tv_connector_state {
- enum drm_mode_subconnector subconnector;
+ enum drm_mode_subconnector select_subconnector;
struct drm_connector_tv_margins margins;
unsigned int mode;
unsigned int brightness;
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 05/33] drm/atomic: Add TV subconnector property to get/set_property
The subconnector property was created by drm_mode_create_tv_properties(),
but wasn't exposed to the userspace through the generic
atomic_get/set_property implementation, and wasn't stored in any generic
state structure.
Let's solve this.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c
b/drivers/gpu/drm/drm_atomic_uapi.c
index c74c78a28171..c06d0639d552 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -688,6 +688,8 @@ static int drm_atomic_connector_set_property(struct
drm_connector *connector,
return -EINVAL;
} else if (property == config->tv_select_subconnector_property) {
state->tv.select_subconnector = val;
+ } else if (property == config->tv_subconnector_property) {
+ state->tv.subconnector = val;
} else if (property == config->tv_left_margin_property) {
state->tv.margins.left = val;
} else if (property == config->tv_right_margin_property) {
@@ -796,6 +798,8 @@ drm_atomic_connector_get_property(struct drm_connector
*connector,
*val = connector->dpms;
} else if (property == config->tv_select_subconnector_property) {
*val = state->tv.select_subconnector;
+ } else if (property == config->tv_subconnector_property) {
+ *val = state->tv.subconnector;
} else if (property == config->tv_left_margin_property) {
*val = state->tv.margins.left;
} else if (property == config->tv_right_margin_property) {
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 60b5662dec7c..1d5e3cccb9e3 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -693,6 +693,7 @@ struct drm_connector_tv_margins {
/**
* struct drm_tv_connector_state - TV connector related states
* @select_subconnector: selected subconnector
+ * @subconnector: detected subconnector
* @margins: TV margins
* @mode: TV mode
* @brightness: brightness in percent
@@ -704,6 +705,7 @@ struct drm_connector_tv_margins {
*/
struct drm_tv_connector_state {
enum drm_mode_subconnector select_subconnector;
+ enum drm_mode_subconnector subconnector;
struct drm_connector_tv_margins margins;
unsigned int mode;
unsigned int brightness;
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 06/33] drm/connector: Rename legacy TV property
The current tv_mode has driver-specific values that don't allow to
easily share code using it, either at the userspace or kernel level.
Since we're going to introduce a new, generic, property that fit the
same purpose, let's rename this one to legacy_tv_mode to make it
obvious we should move away from it.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c
b/drivers/gpu/drm/drm_atomic_uapi.c
index c06d0639d552..7f2b9a07fbdf 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -698,8 +698,8 @@ static int drm_atomic_connector_set_property(struct
drm_connector *connector,
state->tv.margins.top = val;
} else if (property == config->tv_bottom_margin_property) {
state->tv.margins.bottom = val;
- } else if (property == config->tv_mode_property) {
- state->tv.mode = val;
+ } else if (property == config->legacy_tv_mode_property) {
+ state->tv.legacy_mode = val;
} else if (property == config->tv_brightness_property) {
state->tv.brightness = val;
} else if (property == config->tv_contrast_property) {
@@ -808,8 +808,8 @@ drm_atomic_connector_get_property(struct drm_connector
*connector,
*val = state->tv.margins.top;
} else if (property == config->tv_bottom_margin_property) {
*val = state->tv.margins.bottom;
- } else if (property == config->tv_mode_property) {
- *val = state->tv.mode;
+ } else if (property == config->legacy_tv_mode_property) {
+ *val = state->tv.legacy_mode;
} else if (property == config->tv_brightness_property) {
*val = state->tv.brightness;
} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index e3142c8142b3..ede6025638d7 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1686,14 +1686,14 @@ int drm_mode_create_tv_properties(struct drm_device
*dev,
if (drm_mode_create_tv_margin_properties(dev))
goto nomem;
- dev->mode_config.tv_mode_property +
dev->mode_config.legacy_tv_mode_property drm_property_create(dev,
DRM_MODE_PROP_ENUM,
"mode", num_modes);
- if (!dev->mode_config.tv_mode_property)
+ if (!dev->mode_config.legacy_tv_mode_property)
goto nomem;
for (i = 0; i < num_modes; i++)
- drm_property_add_enum(dev->mode_config.tv_mode_property,
+ drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
i, modes[i]);
dev->mode_config.tv_brightness_property diff --git
a/drivers/gpu/drm/gud/gud_connector.c b/drivers/gpu/drm/gud/gud_connector.c
index fa636206f232..86e992b2108b 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -303,7 +303,7 @@ static int gud_connector_atomic_check(struct drm_connector
*connector,
old_state->tv.margins.right != new_state->tv.margins.right ||
old_state->tv.margins.top != new_state->tv.margins.top ||
old_state->tv.margins.bottom != new_state->tv.margins.bottom ||
- old_state->tv.mode != new_state->tv.mode ||
+ old_state->tv.legacy_mode != new_state->tv.legacy_mode ||
old_state->tv.brightness != new_state->tv.brightness ||
old_state->tv.contrast != new_state->tv.contrast ||
old_state->tv.flicker_reduction != new_state->tv.flicker_reduction
||
@@ -424,7 +424,7 @@ gud_connector_property_lookup(struct drm_connector
*connector, u16 prop)
case GUD_PROPERTY_TV_BOTTOM_MARGIN:
return config->tv_bottom_margin_property;
case GUD_PROPERTY_TV_MODE:
- return config->tv_mode_property;
+ return config->legacy_tv_mode_property;
case GUD_PROPERTY_TV_BRIGHTNESS:
return config->tv_brightness_property;
case GUD_PROPERTY_TV_CONTRAST:
@@ -454,7 +454,7 @@ static unsigned int *gud_connector_tv_state_val(u16 prop,
struct drm_tv_connecto
case GUD_PROPERTY_TV_BOTTOM_MARGIN:
return &state->margins.bottom;
case GUD_PROPERTY_TV_MODE:
- return &state->mode;
+ return &state->legacy_mode;
case GUD_PROPERTY_TV_BRIGHTNESS:
return &state->brightness;
case GUD_PROPERTY_TV_CONTRAST:
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index b91e48d2190d..d29b63fd6178 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -264,7 +264,7 @@ static int ch7006_encoder_create_resources(struct
drm_encoder *encoder,
priv->hmargin);
drm_object_attach_property(&connector->base,
conf->tv_bottom_margin_property,
priv->vmargin);
- drm_object_attach_property(&connector->base, conf->tv_mode_property,
+ drm_object_attach_property(&connector->base,
conf->legacy_tv_mode_property,
priv->norm);
drm_object_attach_property(&connector->base,
conf->tv_brightness_property,
priv->brightness);
@@ -315,7 +315,7 @@ static int ch7006_encoder_set_property(struct drm_encoder
*encoder,
ch7006_load_reg(client, state, CH7006_POV);
ch7006_load_reg(client, state, CH7006_VPOS);
- } else if (property == conf->tv_mode_property) {
+ } else if (property == conf->legacy_tv_mode_property) {
if (connector->dpms != DRM_MODE_DPMS_OFF)
return -EINVAL;
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c
b/drivers/gpu/drm/i915/display/intel_tv.c
index 9379f3463344..abaf9ded942d 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1986,7 +1986,8 @@ intel_tv_init(struct drm_i915_private *dev_priv)
}
drm_mode_create_tv_properties(dev, i, tv_format_names);
- drm_object_attach_property(&connector->base,
dev->mode_config.tv_mode_property,
+ drm_object_attach_property(&connector->base,
+ dev->mode_config.legacy_tv_mode_property,
state->tv.mode);
drm_object_attach_property(&connector->base,
dev->mode_config.tv_left_margin_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index be28e7bd7490..1a15534adc60 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -662,7 +662,7 @@ static int nv17_tv_create_resources(struct drm_encoder
*encoder,
conf->tv_subconnector_property,
tv_enc->subconnector);
drm_object_attach_property(&connector->base,
- conf->tv_mode_property,
+ conf->legacy_tv_mode_property,
tv_enc->tv_norm);
drm_object_attach_property(&connector->base,
conf->tv_flicker_reduction_property,
@@ -722,7 +722,7 @@ static int nv17_tv_set_property(struct drm_encoder *encoder,
if (encoder->crtc)
nv17_tv_update_rescaler(encoder);
- } else if (property == conf->tv_mode_property) {
+ } else if (property == conf->legacy_tv_mode_property) {
if (connector->dpms != DRM_MODE_DPMS_OFF)
return -EINVAL;
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 0b3333865702..77c50ecb0309 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -274,7 +274,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector
*connector)
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev,
- vc4_vec_tv_modes[state->tv.mode].mode);
+ vc4_vec_tv_modes[state->tv.legacy_mode].mode);
if (!mode) {
DRM_ERROR("Failed to create a new display mode\n");
return -ENOMEM;
@@ -312,7 +312,7 @@ static int vc4_vec_connector_init(struct drm_device *dev,
struct vc4_vec *vec)
drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
drm_object_attach_property(&connector->base,
- dev->mode_config.tv_mode_property,
+ dev->mode_config.legacy_tv_mode_property,
VC4_VEC_TV_MODE_NTSC);
drm_connector_attach_encoder(connector, &vec->encoder.base);
@@ -449,7 +449,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder
*encoder,
{
const struct vc4_vec_tv_mode *vec_mode;
- vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode];
+ vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
if (conn_state->crtc &&
!drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 1d5e3cccb9e3..5cfad8b6ad83 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -695,7 +695,7 @@ struct drm_connector_tv_margins {
* @select_subconnector: selected subconnector
* @subconnector: detected subconnector
* @margins: TV margins
- * @mode: TV mode
+ * @legacy_mode: Legacy TV mode, driver specific value
* @brightness: brightness in percent
* @contrast: contrast in percent
* @flicker_reduction: flicker reduction in percent
@@ -707,7 +707,7 @@ struct drm_tv_connector_state {
enum drm_mode_subconnector select_subconnector;
enum drm_mode_subconnector subconnector;
struct drm_connector_tv_margins margins;
- unsigned int mode;
+ unsigned int legacy_mode;
unsigned int brightness;
unsigned int contrast;
unsigned int flicker_reduction;
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 6b5e01295348..35a827175c24 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -714,11 +714,13 @@ struct drm_mode_config {
* between different TV connector types.
*/
struct drm_property *tv_select_subconnector_property;
+
/**
- * @tv_mode_property: Optional TV property to select
+ * @legacy_tv_mode_property: Optional TV property to select
* the output TV mode.
*/
- struct drm_property *tv_mode_property;
+ struct drm_property *legacy_tv_mode_property;
+
/**
* @tv_left_margin_property: Optional TV property to set the left
* margin (expressed in pixels).
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 07/33] drm/connector: Only register TV mode property if present
The drm_create_tv_properties() will create the TV mode property
unconditionally.
However, since we'll gradually phase it out, let's register it only if
we
have a list passed as an argument. This will make the transition easier.
Acked-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index ede6025638d7..17a5913cefe3 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1686,15 +1686,18 @@ int drm_mode_create_tv_properties(struct drm_device
*dev,
if (drm_mode_create_tv_margin_properties(dev))
goto nomem;
- dev->mode_config.legacy_tv_mode_property - drm_property_create(dev,
DRM_MODE_PROP_ENUM,
- "mode", num_modes);
- if (!dev->mode_config.legacy_tv_mode_property)
- goto nomem;
- for (i = 0; i < num_modes; i++)
- drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
- i, modes[i]);
+ if (num_modes) {
+ dev->mode_config.legacy_tv_mode_property + drm_property_create(dev,
DRM_MODE_PROP_ENUM,
+ "mode", num_modes);
+ if (!dev->mode_config.legacy_tv_mode_property)
+ goto nomem;
+
+ for (i = 0; i < num_modes; i++)
+ drm_property_add_enum(dev->mode_config.legacy_tv_mode_property,
+ i, modes[i]);
+ }
dev->mode_config.tv_brightness_property drm_property_create_range(dev,
0, "brightness", 0, 100);
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 08/33] drm/connector: Rename drm_mode_create_tv_properties
drm_mode_create_tv_properties(), among other things, will create the
"mode" property that stores the analog TV mode that connector is
supposed to output.
However, that property is getting deprecated, so let's rename that
function to mention it's deprecated. We'll introduce a new variant of
that function creating the property superseeding it in a later patch.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 17a5913cefe3..4e4fbc9e0049 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1600,7 +1600,7 @@ EXPORT_SYMBOL(drm_connector_attach_tv_margin_properties);
* Called by a driver's HDMI connector initialization routine, this
function
* creates the TV margin properties for a given device. No need to call this
* function for an SDTV connector, it's already called from
- * drm_mode_create_tv_properties().
+ * drm_mode_create_tv_properties_legacy().
*
* Returns:
* 0 on success or a negative error code on failure.
@@ -1635,7 +1635,7 @@ int drm_mode_create_tv_margin_properties(struct drm_device
*dev)
EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
/**
- * drm_mode_create_tv_properties - create TV specific connector properties
+ * drm_mode_create_tv_properties_legacy - create TV specific connector
properties
* @dev: DRM device
* @num_modes: number of different TV formats (modes) supported
* @modes: array of pointers to strings containing name of each format
@@ -1648,9 +1648,9 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
* Returns:
* 0 on success or a negative error code on failure.
*/
-int drm_mode_create_tv_properties(struct drm_device *dev,
- unsigned int num_modes,
- const char * const modes[])
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+ unsigned int num_modes,
+ const char * const modes[])
{
struct drm_property *tv_selector;
struct drm_property *tv_subconnector;
@@ -1733,7 +1733,7 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
nomem:
return -ENOMEM;
}
-EXPORT_SYMBOL(drm_mode_create_tv_properties);
+EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
/**
* drm_mode_create_scaling_mode_property - create scaling mode property
diff --git a/drivers/gpu/drm/gud/gud_connector.c
b/drivers/gpu/drm/gud/gud_connector.c
index 86e992b2108b..034e78360d4f 100644
--- a/drivers/gpu/drm/gud/gud_connector.c
+++ b/drivers/gpu/drm/gud/gud_connector.c
@@ -400,7 +400,7 @@ static int gud_connector_add_tv_mode(struct gud_device
*gdrm, struct drm_connect
for (i = 0; i < num_modes; i++)
modes[i] = &buf[i * GUD_CONNECTOR_TV_MODE_NAME_LEN];
- ret = drm_mode_create_tv_properties(connector->dev, num_modes, modes);
+ ret = drm_mode_create_tv_properties_legacy(connector->dev, num_modes,
modes);
free:
kfree(buf);
if (ret < 0)
@@ -539,7 +539,7 @@ static int gud_connector_add_properties(struct gud_device
*gdrm, struct gud_conn
fallthrough;
case GUD_PROPERTY_TV_HUE:
/* This is a no-op if already added. */
- ret = drm_mode_create_tv_properties(drm, 0, NULL);
+ ret = drm_mode_create_tv_properties_legacy(drm, 0, NULL);
if (ret)
goto out;
break;
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index d29b63fd6178..506f6f932518 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -250,7 +250,7 @@ static int ch7006_encoder_create_resources(struct
drm_encoder *encoder,
struct drm_device *dev = encoder->dev;
struct drm_mode_config *conf = &dev->mode_config;
- drm_mode_create_tv_properties(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
+ drm_mode_create_tv_properties_legacy(dev, NUM_TV_NORMS, ch7006_tv_norm_names);
priv->scale_property = drm_property_create_range(dev, 0, "scale",
0, 2);
if (!priv->scale_property)
diff --git a/drivers/gpu/drm/i915/display/intel_tv.c
b/drivers/gpu/drm/i915/display/intel_tv.c
index abaf9ded942d..5e88da8185ee 100644
--- a/drivers/gpu/drm/i915/display/intel_tv.c
+++ b/drivers/gpu/drm/i915/display/intel_tv.c
@@ -1984,7 +1984,7 @@ intel_tv_init(struct drm_i915_private *dev_priv)
tv_format_names[i] = tv_modes[i].name;
}
- drm_mode_create_tv_properties(dev, i, tv_format_names);
+ drm_mode_create_tv_properties_legacy(dev, i, tv_format_names);
drm_object_attach_property(&connector->base,
dev->mode_config.legacy_tv_mode_property,
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index 1a15534adc60..e5480dab55e3 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -653,7 +653,7 @@ static int nv17_tv_create_resources(struct drm_encoder
*encoder,
tv_enc->tv_norm = i;
}
- drm_mode_create_tv_properties(dev, num_tv_norms, nv17_tv_norm_names);
+ drm_mode_create_tv_properties_legacy(dev, num_tv_norms, nv17_tv_norm_names);
drm_object_attach_property(&connector->base,
conf->tv_select_subconnector_property,
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 77c50ecb0309..f31fef938f11 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -514,8 +514,9 @@ static int vc4_vec_bind(struct device *dev, struct device
*master, void *data)
struct vc4_vec *vec;
int ret;
- ret = drm_mode_create_tv_properties(drm, ARRAY_SIZE(tv_mode_names),
- tv_mode_names);
+ ret = drm_mode_create_tv_properties_legacy(drm,
+ ARRAY_SIZE(tv_mode_names),
+ tv_mode_names);
if (ret)
return ret;
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 5cfad8b6ad83..d566b4a4709c 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1799,9 +1799,9 @@ int drm_mode_create_dvi_i_properties(struct drm_device
*dev);
void drm_connector_attach_dp_subconnector_property(struct drm_connector
*connector);
int drm_mode_create_tv_margin_properties(struct drm_device *dev);
-int drm_mode_create_tv_properties(struct drm_device *dev,
- unsigned int num_modes,
- const char * const modes[]);
+int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
+ unsigned int num_modes,
+ const char * const modes[]);
void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
int drm_mode_create_scaling_mode_property(struct drm_device *dev);
int drm_connector_attach_content_type_property(struct drm_connector *dev);
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 09/33] drm/connector: Add TV standard property
The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.
Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.
Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.
We'll then be able to phase out the older tv mode property.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c
b/drivers/gpu/drm/drm_atomic_uapi.c
index 7f2b9a07fbdf..d867e7f9f2cd 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -700,6 +700,8 @@ static int drm_atomic_connector_set_property(struct
drm_connector *connector,
state->tv.margins.bottom = val;
} else if (property == config->legacy_tv_mode_property) {
state->tv.legacy_mode = val;
+ } else if (property == config->tv_mode_property) {
+ state->tv.mode = val;
} else if (property == config->tv_brightness_property) {
state->tv.brightness = val;
} else if (property == config->tv_contrast_property) {
@@ -810,6 +812,8 @@ drm_atomic_connector_get_property(struct drm_connector
*connector,
*val = state->tv.margins.bottom;
} else if (property == config->legacy_tv_mode_property) {
*val = state->tv.legacy_mode;
+ } else if (property == config->tv_mode_property) {
+ *val = state->tv.mode;
} else if (property == config->tv_brightness_property) {
*val = state->tv.brightness;
} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 4e4fbc9e0049..e7aa8de08f5b 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -980,6 +980,18 @@ static const struct drm_prop_enum_list
drm_dvi_i_subconnector_enum_list[] = {
DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
drm_dvi_i_subconnector_enum_list)
+static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
+ { DRM_MODE_TV_MODE_NONE, "None" },
+ { DRM_MODE_TV_MODE_NTSC, "NTSC" },
+ { DRM_MODE_TV_MODE_NTSC_443, "NTSC-443" },
+ { DRM_MODE_TV_MODE_NTSC_J, "NTSC-J" },
+ { DRM_MODE_TV_MODE_PAL, "PAL" },
+ { DRM_MODE_TV_MODE_PAL_M, "PAL-M" },
+ { DRM_MODE_TV_MODE_PAL_N, "PAL-N" },
+ { DRM_MODE_TV_MODE_SECAM, "SECAM" },
+};
+DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
+
static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and
TV-out */
{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
@@ -1645,6 +1657,10 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
* responsible for allocating a list of format names and passing them to
* this routine.
*
+ * NOTE: This functions registers the deprecated "mode" connector
+ * property to select the analog TV mode (ie, NTSC, PAL, etc.). New
+ * drivers must use drm_mode_create_tv_properties() instead.
+ *
* Returns:
* 0 on success or a negative error code on failure.
*/
@@ -1686,7 +1702,6 @@ int drm_mode_create_tv_properties_legacy(struct drm_device
*dev,
if (drm_mode_create_tv_margin_properties(dev))
goto nomem;
-
if (num_modes) {
dev->mode_config.legacy_tv_mode_property drm_property_create(dev,
DRM_MODE_PROP_ENUM,
@@ -1735,6 +1750,49 @@ int drm_mode_create_tv_properties_legacy(struct
drm_device *dev,
}
EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
+/**
+ * drm_mode_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @supported_tv_modes: Bitmask of TV modes supported (See DRM_MODE_TV_MODE_*)
+
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device. Caller is
+ * responsible for allocating a list of format names and passing them to
+ * this routine.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev,
+ unsigned int supported_tv_modes)
+{
+ struct drm_prop_enum_list tv_mode_list[DRM_MODE_TV_MODE_MAX];
+ struct drm_property *tv_mode;
+ unsigned int i, len = 0;
+
+ if (dev->mode_config.tv_mode_property)
+ return 0;
+
+ for (i = 0; i < DRM_MODE_TV_MODE_MAX; i++) {
+ if (!(supported_tv_modes & BIT(i)))
+ continue;
+
+ tv_mode_list[len].type = i;
+ tv_mode_list[len].name = drm_get_tv_mode_name(i);
+ len++;
+ }
+
+ tv_mode = drm_property_create_enum(dev, 0, "TV mode",
+ tv_mode_list, len);
+ if (!tv_mode)
+ return -ENOMEM;
+
+ dev->mode_config.tv_mode_property = tv_mode;
+
+ return drm_mode_create_tv_properties_legacy(dev, 0, NULL);
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
/**
* drm_mode_create_scaling_mode_property - create scaling mode property
* @dev: DRM device
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index d566b4a4709c..fffacbfd0a45 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -143,6 +143,71 @@ enum subpixel_order {
};
+/**
+ * enum drm_connector_tv_mode - Analog TV output mode
+ *
+ * This enum is used to indicate the TV output mode used on an analog TV
+ * connector.
+ *
+ * WARNING: The values of this enum is uABI since they're exposed in the
+ * "TV mode" connector property.
+ */
+enum drm_connector_tv_mode {
+ /**
+ * @DRM_MODE_TV_MODE_NONE: Placeholder to not default on one
+ * variant or the other when nothing is set.
+ */
+ DRM_MODE_TV_MODE_NONE = 0,
+
+ /**
+ * @DRM_MODE_TV_MODE_NTSC: CCIR System M (aka 525-lines)
+ * together with the NTSC Color Encoding.
+ */
+ DRM_MODE_TV_MODE_NTSC,
+
+ /**
+ * @DRM_MODE_TV_MODE_NTSC_443: Variant of
+ * @DRM_MODE_TV_MODE_NTSC. Uses a color subcarrier frequency
+ * of 4.43 MHz.
+ */
+ DRM_MODE_TV_MODE_NTSC_443,
+
+ /**
+ * @DRM_MODE_TV_MODE_NTSC_J: Variant of @DRM_MODE_TV_MODE_NTSC
+ * used in Japan. Uses a black level equals to the blanking
+ * level.
+ */
+ DRM_MODE_TV_MODE_NTSC_J,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL: CCIR System B together with the PAL
+ * color system.
+ */
+ DRM_MODE_TV_MODE_PAL,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_M: CCIR System M (aka 525-lines)
+ * together with the PAL color encoding
+ */
+ DRM_MODE_TV_MODE_PAL_M,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_N: CCIR System N together with the PAL
+ * color encoding. It uses 625 lines, but has a color subcarrier
+ * frequency of 3.58MHz, the SECAM color space, and narrower
+ * channels compared to most of the other PAL variants.
+ */
+ DRM_MODE_TV_MODE_PAL_N,
+
+ /**
+ * @DRM_MODE_TV_MODE_SECAM: CCIR System B together with the
+ * SECAM color system.
+ */
+ DRM_MODE_TV_MODE_SECAM,
+
+ DRM_MODE_TV_MODE_MAX,
+};
+
/**
* struct drm_scrambling: sink's scrambling support.
*/
@@ -696,6 +761,7 @@ struct drm_connector_tv_margins {
* @subconnector: detected subconnector
* @margins: TV margins
* @legacy_mode: Legacy TV mode, driver specific value
+ * @mode: TV mode
* @brightness: brightness in percent
* @contrast: contrast in percent
* @flicker_reduction: flicker reduction in percent
@@ -708,6 +774,7 @@ struct drm_tv_connector_state {
enum drm_mode_subconnector subconnector;
struct drm_connector_tv_margins margins;
unsigned int legacy_mode;
+ unsigned int mode;
unsigned int brightness;
unsigned int contrast;
unsigned int flicker_reduction;
@@ -1789,6 +1856,7 @@ const char *drm_get_subpixel_order_name(enum
subpixel_order order);
const char *drm_get_dpms_name(int val);
const char *drm_get_dvi_i_subconnector_name(int val);
const char *drm_get_dvi_i_select_name(int val);
+const char *drm_get_tv_mode_name(int val);
const char *drm_get_tv_subconnector_name(int val);
const char *drm_get_tv_select_name(int val);
const char *drm_get_dp_subconnector_name(int val);
@@ -1802,6 +1870,8 @@ int drm_mode_create_tv_margin_properties(struct drm_device
*dev);
int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
unsigned int num_modes,
const char * const modes[]);
+int drm_mode_create_tv_properties(struct drm_device *dev,
+ unsigned int supported_tv_modes);
void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
int drm_mode_create_scaling_mode_property(struct drm_device *dev);
int drm_connector_attach_content_type_property(struct drm_connector *dev);
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 35a827175c24..10a6f7d1df0d 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -718,9 +718,17 @@ struct drm_mode_config {
/**
* @legacy_tv_mode_property: Optional TV property to select
* the output TV mode.
+ *
+ * Superseeded by @tv_mode_property
*/
struct drm_property *legacy_tv_mode_property;
+ /**
+ * @tv_mode_property: Optional TV property to select the TV
+ * standard output on the connector.
+ */
+ struct drm_property *tv_mode_property;
+
/**
* @tv_left_margin_property: Optional TV property to set the left
* margin (expressed in pixels).
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 10/33] drm/modes: Add a function to generate analog display modes
Multiple drivers (meson, vc4, sun4i) define analog TV 525-lines and
625-lines modes in their drivers.
Since those modes are fairly standard, and that we'll need to use them
in more places in the future, it makes sense to move their definition
into the core framework.
However, analog display usually have fairly loose timings requirements,
the only discrete parameters being the total number of lines and pixel
clock frequency. Thus, we created a function that will create a display
mode from the standard, the pixel frequency and the active area.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 304004fb80aa..76ab700f56ff 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -116,6 +116,480 @@ void drm_mode_probed_add(struct drm_connector *connector,
}
EXPORT_SYMBOL(drm_mode_probed_add);
+enum drm_mode_analog {
+ DRM_MODE_ANALOG_NTSC, /* 525 lines, 60Hz */
+ DRM_MODE_ANALOG_PAL, /* 625 lines, 50Hz */
+};
+
+/*
+ * The timings come from:
+ * -
https://web.archive.org/web/20220406232708/http://www.kolumbus.fi/pami1/video/pal_ntsc.html
+ * -
https://web.archive.org/web/20220406124914/http://martin.hinner.info/vga/pal.html
+ * -
https://web.archive.org/web/20220609202433/http://www.batsocks.co.uk/readme/video_timing.htm
+ */
+#define NTSC_LINE_DURATION_NS 63556U
+#define NTSC_LINES_NUMBER 525
+
+#define NTSC_HBLK_DURATION_TYP_NS 10900U
+#define NTSC_HBLK_DURATION_MIN_NS (NTSC_HBLK_DURATION_TYP_NS - 200)
+#define NTSC_HBLK_DURATION_MAX_NS (NTSC_HBLK_DURATION_TYP_NS + 200)
+
+#define NTSC_HACT_DURATION_TYP_NS (NTSC_LINE_DURATION_NS -
NTSC_HBLK_DURATION_TYP_NS)
+#define NTSC_HACT_DURATION_MIN_NS (NTSC_LINE_DURATION_NS -
NTSC_HBLK_DURATION_MAX_NS)
+#define NTSC_HACT_DURATION_MAX_NS (NTSC_LINE_DURATION_NS -
NTSC_HBLK_DURATION_MIN_NS)
+
+#define NTSC_HFP_DURATION_TYP_NS 1500
+#define NTSC_HFP_DURATION_MIN_NS 1270
+#define NTSC_HFP_DURATION_MAX_NS 2220
+
+#define NTSC_HSLEN_DURATION_TYP_NS 4700
+#define NTSC_HSLEN_DURATION_MIN_NS (NTSC_HSLEN_DURATION_TYP_NS - 100)
+#define NTSC_HSLEN_DURATION_MAX_NS (NTSC_HSLEN_DURATION_TYP_NS + 100)
+
+#define NTSC_HBP_DURATION_TYP_NS 4700
+
+/*
+ * I couldn't find the actual tolerance for the back porch, so let's
+ * just reuse the sync length ones.
+ */
+#define NTSC_HBP_DURATION_MIN_NS (NTSC_HBP_DURATION_TYP_NS - 100)
+#define NTSC_HBP_DURATION_MAX_NS (NTSC_HBP_DURATION_TYP_NS + 100)
+
+#define PAL_LINE_DURATION_NS 64000U
+#define PAL_LINES_NUMBER 625
+
+#define PAL_HACT_DURATION_TYP_NS 51950U
+#define PAL_HACT_DURATION_MIN_NS (PAL_HACT_DURATION_TYP_NS - 100)
+#define PAL_HACT_DURATION_MAX_NS (PAL_HACT_DURATION_TYP_NS + 400)
+
+#define PAL_HBLK_DURATION_TYP_NS (PAL_LINE_DURATION_NS -
PAL_HACT_DURATION_TYP_NS)
+#define PAL_HBLK_DURATION_MIN_NS (PAL_LINE_DURATION_NS -
PAL_HACT_DURATION_MAX_NS)
+#define PAL_HBLK_DURATION_MAX_NS (PAL_LINE_DURATION_NS -
PAL_HACT_DURATION_MIN_NS)
+
+#define PAL_HFP_DURATION_TYP_NS 1650
+#define PAL_HFP_DURATION_MIN_NS (PAL_HFP_DURATION_TYP_NS - 100)
+#define PAL_HFP_DURATION_MAX_NS (PAL_HFP_DURATION_TYP_NS + 400)
+
+#define PAL_HSLEN_DURATION_TYP_NS 4700
+#define PAL_HSLEN_DURATION_MIN_NS (PAL_HSLEN_DURATION_TYP_NS - 200)
+#define PAL_HSLEN_DURATION_MAX_NS (PAL_HSLEN_DURATION_TYP_NS + 200)
+
+#define PAL_HBP_DURATION_TYP_NS 5700
+#define PAL_HBP_DURATION_MIN_NS (PAL_HBP_DURATION_TYP_NS - 200)
+#define PAL_HBP_DURATION_MAX_NS (PAL_HBP_DURATION_TYP_NS + 200)
+
+struct analog_param_field {
+ unsigned int even, odd;
+};
+
+#define PARAM_FIELD(_odd, _even) \
+ { .even = _even, .odd = _odd }
+
+struct analog_param_range {
+ unsigned int min, typ, max;
+};
+
+#define PARAM_RANGE(_min, _typ, _max) \
+ { .min = _min, .typ = _typ, .max = _max }
+
+struct analog_parameters {
+ unsigned int num_lines;
+ unsigned int line_duration_ns;
+
+ struct analog_param_range hact_ns;
+ struct analog_param_range hfp_ns;
+ struct analog_param_range hslen_ns;
+ struct analog_param_range hbp_ns;
+ struct analog_param_range hblk_ns;
+
+ unsigned int bt601_hfp;
+
+ struct analog_param_field vfp_lines;
+ struct analog_param_field vslen_lines;
+ struct analog_param_field vbp_lines;
+};
+
+#define TV_MODE_PARAMETER(_mode, _lines, _line_dur, _hact, _hfp, _hslen, _hbp,
_hblk, _bt601_hfp, _vfp, _vslen, _vbp) \
+ [_mode] = { \
+ .num_lines = _lines, \
+ .line_duration_ns = _line_dur, \
+ .hact_ns = _hact, \
+ .hfp_ns = _hfp, \
+ .hslen_ns = _hslen, \
+ .hbp_ns = _hbp, \
+ .hblk_ns = _hblk, \
+ .bt601_hfp = _bt601_hfp, \
+ .vfp_lines = _vfp, \
+ .vslen_lines = _vslen, \
+ .vbp_lines = _vbp, \
+ }
+
+const static struct analog_parameters tv_modes_parameters[] = {
+ TV_MODE_PARAMETER(DRM_MODE_ANALOG_NTSC,
+ NTSC_LINES_NUMBER,
+ NTSC_LINE_DURATION_NS,
+ PARAM_RANGE(NTSC_HACT_DURATION_MIN_NS,
+ NTSC_HACT_DURATION_TYP_NS,
+ NTSC_HACT_DURATION_MAX_NS),
+ PARAM_RANGE(NTSC_HFP_DURATION_MIN_NS,
+ NTSC_HFP_DURATION_TYP_NS,
+ NTSC_HFP_DURATION_MAX_NS),
+ PARAM_RANGE(NTSC_HSLEN_DURATION_MIN_NS,
+ NTSC_HSLEN_DURATION_TYP_NS,
+ NTSC_HSLEN_DURATION_MAX_NS),
+ PARAM_RANGE(NTSC_HBP_DURATION_MIN_NS,
+ NTSC_HBP_DURATION_TYP_NS,
+ NTSC_HBP_DURATION_MAX_NS),
+ PARAM_RANGE(NTSC_HBLK_DURATION_MIN_NS,
+ NTSC_HBLK_DURATION_TYP_NS,
+ NTSC_HBLK_DURATION_MAX_NS),
+ 16,
+ PARAM_FIELD(3, 3),
+ PARAM_FIELD(3, 3),
+ PARAM_FIELD(16, 17)),
+ TV_MODE_PARAMETER(DRM_MODE_ANALOG_PAL,
+ PAL_LINES_NUMBER,
+ PAL_LINE_DURATION_NS,
+ PARAM_RANGE(PAL_HACT_DURATION_MIN_NS,
+ PAL_HACT_DURATION_TYP_NS,
+ PAL_HACT_DURATION_MAX_NS),
+ PARAM_RANGE(PAL_HFP_DURATION_MIN_NS,
+ PAL_HFP_DURATION_TYP_NS,
+ PAL_HFP_DURATION_MAX_NS),
+ PARAM_RANGE(PAL_HSLEN_DURATION_MIN_NS,
+ PAL_HSLEN_DURATION_TYP_NS,
+ PAL_HSLEN_DURATION_MAX_NS),
+ PARAM_RANGE(PAL_HBP_DURATION_MIN_NS,
+ PAL_HBP_DURATION_TYP_NS,
+ PAL_HBP_DURATION_MAX_NS),
+ PARAM_RANGE(PAL_HBLK_DURATION_MIN_NS,
+ PAL_HBLK_DURATION_TYP_NS,
+ PAL_HBLK_DURATION_MAX_NS),
+ 12,
+
+ /*
+ * The front porch is actually 6 short sync
+ * pulses for the even field, and 5 for the
+ * odd field. Each sync takes half a life so
+ * the odd field front porch is shorter by
+ * half a line.
+ *
+ * In progressive, we're supposed to use 6
+ * pulses, so we're fine there
+ */
+ PARAM_FIELD(3, 2),
+
+ /*
+ * The vsync length is 5 long sync pulses,
+ * each field taking half a line. We're
+ * shorter for both fields by half a line.
+ *
+ * In progressive, we're supposed to use 5
+ * pulses, so we're off by half
+ * a line.
+ *
+ * In interlace, we're now off by half a line
+ * for the even field and one line for the odd
+ * field.
+ */
+ PARAM_FIELD(3, 3),
+
+ /*
+ * The back porch starts with post-equalizing
+ * pulses, consisting in 5 short sync pulses
+ * for the even field, 4 for the odd field. In
+ * progressive, it's 5 short syncs.
+ *
+ * In progressive, we thus have 2.5 lines,
+ * plus the 0.5 line we were missing
+ * previously, so we should use 3 lines.
+ *
+ * In interlace, the even field is in the
+ * exact same case than progressive. For the
+ * odd field, we should be using 2 lines but
+ * we're one line short, so we'll make up for
+ * it here by using 3.
+ *
+ * The entire blanking area is supposed to
+ * take 25 lines, so we also need to account
+ * for the rest of the blanking area that
+ * can't be in either the front porch or sync
+ * period.
+ */
+ PARAM_FIELD(19, 20)),
+};
+
+static int fill_analog_mode(struct drm_device *dev,
+ struct drm_display_mode *mode,
+ const struct analog_parameters *params,
+ unsigned long pixel_clock_hz,
+ unsigned int hactive,
+ unsigned int vactive,
+ bool interlace)
+{
+ unsigned long pixel_duration_ns = NSEC_PER_SEC / pixel_clock_hz;
+ unsigned int htotal, vtotal;
+ unsigned int max_hact, hact_duration_ns;
+ unsigned int hblk, hblk_duration_ns;
+ unsigned int hfp, hfp_duration_ns;
+ unsigned int hslen, hslen_duration_ns;
+ unsigned int hbp, hbp_duration_ns;
+ unsigned int porches, porches_duration_ns;
+ unsigned int vfp, vfp_min;
+ unsigned int vbp, vbp_min;
+ unsigned int vslen;
+ bool bt601 = false;
+ int porches_rem;
+ u64 result;
+
+ drm_dbg_kms(dev,
+ "Generating a %ux%u%c, %u-line mode with a %lu kHz clock\n",
+ hactive, vactive,
+ interlace ? 'i' : 'p',
+ params->num_lines,
+ pixel_clock_hz / 1000);
+
+ max_hact = params->hact_ns.max / pixel_duration_ns;
+ if (pixel_clock_hz == 13500000 && hactive > max_hact &&
hactive <= 720) {
+ drm_dbg_kms(dev, "Trying to generate a BT.601 mode. Disabling
checks.\n");
+ bt601 = true;
+ }
+
+ /*
+ * Our pixel duration is going to be round down by the division,
+ * so rounding up is probably going to introduce even more
+ * deviation.
+ */
+ result = (u64)params->line_duration_ns * pixel_clock_hz;
+ do_div(result, NSEC_PER_SEC);
+ htotal = result;
+
+ drm_dbg_kms(dev, "Total Horizontal Number of Pixels: %u\n", htotal);
+
+ hact_duration_ns = hactive * pixel_duration_ns;
+ if (!bt601 &&
+ (hact_duration_ns < params->hact_ns.min ||
+ hact_duration_ns > params->hact_ns.max)) {
+ DRM_ERROR("Invalid horizontal active area duration: %uns (min: %u, max
%u)\n",
+ hact_duration_ns, params->hact_ns.min, params->hact_ns.max);
+ return -EINVAL;
+ }
+
+ hblk = htotal - hactive;
+ drm_dbg_kms(dev, "Horizontal Blanking Period: %u\n", hblk);
+
+ hblk_duration_ns = hblk * pixel_duration_ns;
+ if (!bt601 &&
+ (hblk_duration_ns < params->hblk_ns.min ||
+ hblk_duration_ns > params->hblk_ns.max)) {
+ DRM_ERROR("Invalid horizontal blanking duration: %uns (min: %u, max
%u)\n",
+ hblk_duration_ns, params->hblk_ns.min, params->hblk_ns.max);
+ return -EINVAL;
+ }
+
+ hslen = DIV_ROUND_UP(params->hslen_ns.typ, pixel_duration_ns);
+ drm_dbg_kms(dev, "Horizontal Sync Period: %u\n", hslen);
+
+ hslen_duration_ns = hslen * pixel_duration_ns;
+ if (!bt601 &&
+ (hslen_duration_ns < params->hslen_ns.min ||
+ hslen_duration_ns > params->hslen_ns.max)) {
+ DRM_ERROR("Invalid horizontal sync duration: %uns (min: %u, max
%u)\n",
+ hslen_duration_ns, params->hslen_ns.min, params->hslen_ns.max);
+ return -EINVAL;
+ }
+
+ porches = hblk - hslen;
+ drm_dbg_kms(dev, "Remaining horizontal pixels for both porches:
%u\n", porches);
+
+ porches_duration_ns = porches * pixel_duration_ns;
+ if (!bt601 &&
+ (porches_duration_ns > (params->hfp_ns.max + params->hbp_ns.max)
||
+ porches_duration_ns < (params->hfp_ns.min +
params->hbp_ns.min))) {
+ DRM_ERROR("Invalid horizontal porches duration: %uns\n",
porches_duration_ns);
+ return -EINVAL;
+ }
+
+ if (bt601) {
+ hfp = params->bt601_hfp;
+ } else {
+ unsigned int hfp_min = DIV_ROUND_UP(params->hfp_ns.min,
+ pixel_duration_ns);
+ unsigned int hbp_min = DIV_ROUND_UP(params->hbp_ns.min,
+ pixel_duration_ns);
+ int porches_rem = porches - hfp_min - hbp_min;
+
+ hfp = hfp_min + DIV_ROUND_UP(porches_rem, 2);
+ }
+
+ drm_dbg_kms(dev, "Horizontal Front Porch: %u\n", hfp);
+
+ hfp_duration_ns = hfp * pixel_duration_ns;
+ if (!bt601 &&
+ (hfp_duration_ns < params->hfp_ns.min ||
+ hfp_duration_ns > params->hfp_ns.max)) {
+ DRM_ERROR("Invalid horizontal front porch duration: %uns (min: %u, max
%u)\n",
+ hfp_duration_ns, params->hfp_ns.min, params->hfp_ns.max);
+ return -EINVAL;
+ }
+
+ hbp = porches - hfp;
+ drm_dbg_kms(dev, "Horizontal Back Porch: %u\n", hbp);
+
+ hbp_duration_ns = hbp * pixel_duration_ns;
+ if (!bt601 &&
+ (hbp_duration_ns < params->hbp_ns.min ||
+ hbp_duration_ns > params->hbp_ns.max)) {
+ DRM_ERROR("Invalid horizontal back porch duration: %uns (min: %u, max
%u)\n",
+ hbp_duration_ns, params->hbp_ns.min, params->hbp_ns.max);
+ return -EINVAL;
+ }
+
+ if (htotal != (hactive + hfp + hslen + hbp))
+ return -EINVAL;
+
+ mode->clock = pixel_clock_hz / 1000;
+ mode->hdisplay = hactive;
+ mode->hsync_start = hactive + hfp;
+ mode->hsync_end = hactive + hfp + hslen;
+ mode->htotal = hactive + hfp + hslen + hbp;
+
+ if (interlace) {
+ vfp_min = params->vfp_lines.even + params->vfp_lines.odd;
+ vbp_min = params->vbp_lines.even + params->vbp_lines.odd;
+ vslen = params->vslen_lines.even + params->vslen_lines.odd;
+ } else {
+ /*
+ * By convention, NSTC (aka 525/60) systems start with
+ * the even field, but PAL (aka 625/50) systems start
+ * with the odd one.
+ *
+ * PAL systems also have asymetric timings between the
+ * even and odd field, while NTSC is symetric.
+ *
+ * Moreover, if we want to create a progressive mode for
+ * PAL, we need to use the odd field timings.
+ *
+ * Since odd == even for NTSC, we can just use the odd
+ * one all the time to simplify the code a bit.
+ */
+ vfp_min = params->vfp_lines.odd;
+ vbp_min = params->vbp_lines.odd;
+ vslen = params->vslen_lines.odd;
+ }
+
+ drm_dbg_kms(dev, "Vertical Sync Period: %u\n", vslen);
+
+ porches = params->num_lines - vactive - vslen;
+ drm_dbg_kms(dev, "Remaining vertical pixels for both porches: %u\n",
porches);
+
+ porches_rem = porches - vfp_min - vbp_min;
+ vfp = vfp_min + (porches_rem / 2);
+ drm_dbg_kms(dev, "Vertical Front Porch: %u\n", vfp);
+
+ vbp = porches - vfp;
+ drm_dbg_kms(dev, "Vertical Back Porch: %u\n", vbp);
+
+ vtotal = vactive + vfp + vslen + vbp;
+ if (params->num_lines != vtotal) {
+ DRM_ERROR("Invalid vertical total: %upx (expected %upx)\n",
+ vtotal, params->num_lines);
+ return -EINVAL;
+ }
+
+ mode->vdisplay = vactive;
+ mode->vsync_start = vactive + vfp;
+ mode->vsync_end = vactive + vfp + vslen;
+ mode->vtotal = vactive + vfp + vslen + vbp;
+
+ mode->type = DRM_MODE_TYPE_DRIVER;
+ mode->flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC;
+ if (interlace)
+ mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+ drm_mode_set_name(mode);
+
+ if (mode->vtotal != params->num_lines)
+ return -EINVAL;
+
+ drm_dbg_kms(dev, "Generated mode " DRM_MODE_FMT "\n",
DRM_MODE_ARG(mode));
+
+ return 0;
+}
+
+/**
+ * drm_analog_tv_mode - create a display mode for an analog TV
+ * @dev: drm device
+ * @tv_mode: TV Mode standard to create a mode for. See DRM_MODE_TV_MODE_*.
+ * @pixel_clock_hz: Pixel Clock Frequency, in Hertz
+ * @hdisplay: hdisplay size
+ * @vdisplay: vdisplay size
+ * @interlace: whether to compute an interlaced mode
+ *
+ * This function creates a struct drm_display_mode instance suited for
+ * an analog TV output, for one of the usual analog TV mode.
+ *
+ * Note that @hdisplay is larger than the usual constraints for the PAL
+ * and NTSC timings, and we'll choose to ignore most timings constraints
+ * to reach those resolutions.
+ *
+ * Returns:
+ *
+ * A pointer to the mode, allocated with drm_mode_create(). Returns NULL
+ * on error.
+ */
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+ enum drm_connector_tv_mode tv_mode,
+ unsigned long pixel_clock_hz,
+ unsigned int hdisplay,
+ unsigned int vdisplay,
+ bool interlace)
+{
+ struct drm_display_mode *mode;
+ enum drm_mode_analog analog;
+ int ret;
+
+ switch (tv_mode) {
+ case DRM_MODE_TV_MODE_NTSC:
+ fallthrough;
+ case DRM_MODE_TV_MODE_NTSC_443:
+ fallthrough;
+ case DRM_MODE_TV_MODE_NTSC_J:
+ fallthrough;
+ case DRM_MODE_TV_MODE_PAL_M:
+ analog = DRM_MODE_ANALOG_NTSC;
+ break;
+
+ case DRM_MODE_TV_MODE_PAL:
+ fallthrough;
+ case DRM_MODE_TV_MODE_PAL_N:
+ fallthrough;
+ case DRM_MODE_TV_MODE_SECAM:
+ analog = DRM_MODE_ANALOG_PAL;
+ break;
+
+ default:
+ return NULL;
+ }
+
+ mode = drm_mode_create(dev);
+ if (!mode)
+ return NULL;
+
+ ret = fill_analog_mode(dev, mode,
+ &tv_modes_parameters[analog],
+ pixel_clock_hz, hdisplay, vdisplay, interlace);
+ if (ret)
+ goto err_free_mode;
+
+ return mode;
+
+err_free_mode:
+ drm_mode_destroy(dev, mode);
+ return NULL;
+}
+EXPORT_SYMBOL(drm_analog_tv_mode);
+
/**
* drm_cvt_mode -create a modeline based on the CVT algorithm
* @dev: drm device
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index b29ef1085cad..b22ac96fdd65 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -10,5 +10,6 @@ obj-$(CONFIG_DRM_KUNIT_TEST) += \
drm_framebuffer_test.o \
drm_kunit_helpers.o \
drm_mm_test.o \
+ drm_modes_test.o \
drm_plane_helper_test.o \
drm_rect_test.o
diff --git a/drivers/gpu/drm/tests/drm_modes_test.c
b/drivers/gpu/drm/tests/drm_modes_test.c
new file mode 100644
index 000000000000..be1ff0e21022
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_modes_test.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for drm_modes functions
+ */
+
+#include <kunit/test.h>
+
+#include <drm/drm_modes.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_modes_test_priv {
+ struct drm_device *drm;
+};
+
+static int drm_modes_test_init(struct kunit *test)
+{
+ struct drm_modes_test_priv *priv;
+
+ priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ priv->drm = drm_kunit_device_init("drm-modes-test");
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->drm);
+
+ test->priv = priv;
+
+ return 0;
+}
+
+static void drm_modes_test_exit(struct kunit *test)
+{
+ struct drm_modes_test_priv *priv = test->priv;
+
+ drm_kunit_device_exit(priv->drm);
+}
+
+static void drm_modes_analog_tv_ntsc_480i(struct kunit *test)
+{
+ struct drm_modes_test_priv *priv = test->priv;
+ struct drm_display_mode *mode;
+
+ mode = drm_analog_tv_mode(priv->drm,
+ DRM_MODE_TV_MODE_NTSC,
+ 13500 * 1000, 720, 480,
+ true);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 60);
+ KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+ /* BT.601 defines hsync_start at 736 for 480i */
+ KUNIT_EXPECT_EQ(test, mode->hsync_start, 736);
+
+ /* 63.556us * 13.5MHz = 858 pixels */
+ KUNIT_EXPECT_EQ(test, mode->htotal, 858);
+ KUNIT_EXPECT_EQ(test, mode->vdisplay, 480);
+ KUNIT_EXPECT_EQ(test, mode->vtotal, 525);
+}
+
+static void drm_modes_analog_tv_ntsc_480i_inlined(struct kunit *test)
+{
+ struct drm_modes_test_priv *priv = test->priv;
+ struct drm_display_mode *expected, *mode;
+
+ expected = drm_analog_tv_mode(priv->drm,
+ DRM_MODE_TV_MODE_NTSC,
+ 13500 * 1000, 720, 480,
+ true);
+ KUNIT_ASSERT_NOT_NULL(test, expected);
+
+ mode = drm_mode_analog_ntsc_480i(priv->drm);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static void drm_modes_analog_tv_pal_576i(struct kunit *test)
+{
+ struct drm_modes_test_priv *priv = test->priv;
+ struct drm_display_mode *mode;
+
+ mode = drm_analog_tv_mode(priv->drm,
+ DRM_MODE_TV_MODE_PAL,
+ 13500 * 1000, 720, 576,
+ true);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_EQ(test, drm_mode_vrefresh(mode), 50);
+ KUNIT_EXPECT_EQ(test, mode->hdisplay, 720);
+
+ /* BT.601 defines hsync_start at 732 for 576i */
+ KUNIT_EXPECT_EQ(test, mode->hsync_start, 732);
+
+ /* 64us * 13.5MHz = 864 pixels */
+ KUNIT_EXPECT_EQ(test, mode->htotal, 864);
+ KUNIT_EXPECT_EQ(test, mode->vdisplay, 576);
+ KUNIT_EXPECT_EQ(test, mode->vtotal, 625);
+}
+
+static void drm_modes_analog_tv_pal_576i_inlined(struct kunit *test)
+{
+ struct drm_modes_test_priv *priv = test->priv;
+ struct drm_display_mode *expected, *mode;
+
+ expected = drm_analog_tv_mode(priv->drm,
+ DRM_MODE_TV_MODE_PAL,
+ 13500 * 1000, 720, 576,
+ true);
+ KUNIT_ASSERT_NOT_NULL(test, expected);
+
+ mode = drm_mode_analog_pal_576i(priv->drm);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected, mode));
+}
+
+static struct kunit_case drm_modes_analog_tv_tests[] = {
+ KUNIT_CASE(drm_modes_analog_tv_ntsc_480i),
+ KUNIT_CASE(drm_modes_analog_tv_ntsc_480i_inlined),
+ KUNIT_CASE(drm_modes_analog_tv_pal_576i),
+ KUNIT_CASE(drm_modes_analog_tv_pal_576i_inlined),
+ { }
+};
+
+static struct kunit_suite drm_modes_analog_tv_test_suite = {
+ .name = "drm_modes_analog_tv",
+ .init = drm_modes_test_init,
+ .exit = drm_modes_test_exit,
+ .test_cases = drm_modes_analog_tv_tests,
+};
+
+kunit_test_suites(
+ &drm_modes_analog_tv_test_suite
+);
+MODULE_LICENSE("GPL v2");
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index a80ae9639e96..dc03ce03e229 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -443,6 +443,23 @@ bool drm_mode_is_420_also(const struct drm_display_info
*display,
bool drm_mode_is_420(const struct drm_display_info *display,
const struct drm_display_mode *mode);
+struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev,
+ enum drm_connector_tv_mode mode,
+ unsigned long pixel_clock_hz,
+ unsigned int hdisplay,
+ unsigned int vdisplay,
+ bool interlace);
+
+static inline struct drm_display_mode *drm_mode_analog_ntsc_480i(struct
drm_device *dev)
+{
+ return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_NTSC, 13500000, 720, 480,
true);
+}
+
+static inline struct drm_display_mode *drm_mode_analog_pal_576i(struct
drm_device *dev)
+{
+ return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_PAL, 13500000, 720, 576,
true);
+}
+
struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
int hdisplay, int vdisplay, int vrefresh,
bool reduced, bool interlaced,
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 11/33] drm/modes: Only consider bpp and refresh before options
Some video= options might have a value that contains a dash. However, the
command line parsing mode considers all dashes as the separator between the
mode and the bpp count.
Let's rework the parsing code a bit to only consider a dash as the bpp
separator if it before a comma, the options separator.
A follow-up patch will add a unit-test for this once such an option is
introduced.
Reviewed-by: Geert Uytterhoeven <geert at linux-m68k.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 76ab700f56ff..8742ee078fe6 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2275,20 +2275,22 @@ bool drm_mode_parse_command_line_for_connector(const
char *mode_option,
name = mode_option;
+ /* Locate the start of named options */
+ options_ptr = strchr(name, ',');
+ if (options_ptr)
+ options_off = options_ptr - name;
+ else
+ options_off = strlen(name);
+
/* Try to locate the bpp and refresh specifiers, if any */
- bpp_ptr = strchr(name, '-');
+ bpp_ptr = strnchr(name, options_off, '-');
if (bpp_ptr)
bpp_off = bpp_ptr - name;
- refresh_ptr = strchr(name, '@');
+ refresh_ptr = strnchr(name, options_off, '@');
if (refresh_ptr)
refresh_off = refresh_ptr - name;
- /* Locate the start of named options */
- options_ptr = strchr(name, ',');
- if (options_ptr)
- options_off = options_ptr - name;
-
/* Locate the end of the name / resolution, and parse it */
if (bpp_ptr) {
mode_end = bpp_off;
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 12/33] drm/modes: parse_cmdline: Add support for named modes containing dashes
From: Geert Uytterhoeven <geert at linux-m68k.org> It is fairly common for named video modes to contain dashes (e.g. "tt-mid" on Atari, "dblntsc-ff" on Amiga). Currently such mode names are not recognized, as the dash is considered to be a separator between mode name and bpp. Fix this by skipping any dashes that are not followed immediately by a digit when looking for the separator. Signed-off-by: Geert Uytterhoeven <geert at linux-m68k.org> Reviewed-by: Hans de Goede <hdegoede at redhat.com> Signed-off-by: Maxime Ripard <maxime at cerno.tech> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 8742ee078fe6..a1964e08c38f 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -2284,6 +2284,8 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option, /* Try to locate the bpp and refresh specifiers, if any */ bpp_ptr = strnchr(name, options_off, '-'); + while (bpp_ptr && !isdigit(bpp_ptr[1])) + bpp_ptr = strnchr(bpp_ptr + 1, options_off, '-'); if (bpp_ptr) bpp_off = bpp_ptr - name; -- b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 13/33] drm/client: Add some tests for drm_connector_pick_cmdline_mode()
drm_connector_pick_cmdline_mode() is in charge of finding a proper
drm_display_mode from the definition we got in the video= command line
argument.
Let's add some unit tests to make sure we're not getting any regressions
there.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_client_modeset.c
b/drivers/gpu/drm/drm_client_modeset.c
index bbc535cc50dd..d553e793e673 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -1237,3 +1237,7 @@ int drm_client_modeset_dpms(struct drm_client_dev *client,
int mode)
return ret;
}
EXPORT_SYMBOL(drm_client_modeset_dpms);
+
+#ifdef CONFIG_DRM_KUNIT_TEST
+#include "tests/drm_client_modeset_test.c"
+#endif
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c
b/drivers/gpu/drm/tests/drm_client_modeset_test.c
new file mode 100644
index 000000000000..46335de7bc6b
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Maxime Ripard <mripard at kernel.org>
+ */
+
+#include <kunit/test.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+
+#include "drm_kunit_helpers.h"
+
+struct drm_client_modeset_test_priv {
+ struct drm_device *drm;
+ struct drm_connector connector;
+};
+
+static int drm_client_modeset_connector_get_modes(struct drm_connector
*connector)
+{
+ struct drm_display_mode *mode;
+ int count;
+
+ count = drm_add_modes_noedid(connector, 1920, 1200);
+
+ return count;
+}
+
+static const struct drm_connector_helper_funcs
drm_client_modeset_connector_helper_funcs = {
+ .get_modes = drm_client_modeset_connector_get_modes,
+};
+
+static const struct drm_connector_funcs drm_client_modeset_connector_funcs = {
+};
+
+static int drm_client_modeset_test_init(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv;
+ int ret;
+
+ priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ test->priv = priv;
+
+ priv->drm = drm_kunit_device_init("drm-client-modeset-test");
+ if (IS_ERR(priv->drm))
+ return PTR_ERR(priv->drm);
+
+ ret = drmm_connector_init(priv->drm, &priv->connector,
+ &drm_client_modeset_connector_funcs,
+ DRM_MODE_CONNECTOR_Unknown,
+ NULL);
+ if (ret)
+ return ret;
+ drm_connector_helper_add(&priv->connector,
&drm_client_modeset_connector_helper_funcs);
+
+ return 0;
+}
+
+static void drm_client_modeset_test_exit(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv = test->priv;
+
+ drm_kunit_device_exit(priv->drm);
+}
+
+static void drm_pick_cmdline_res_1920_1080_60(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv = test->priv;
+ struct drm_device *drm = priv->drm;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+ struct drm_display_mode *expected_mode, *mode;
+ const char *cmdline = "1920x1080 at 60";
+ int ret;
+
+ expected_mode = drm_mode_find_dmt(priv->drm, 1920, 1080, 60, false);
+ KUNIT_ASSERT_PTR_NE(test, expected_mode, NULL);
+
+ KUNIT_ASSERT_TRUE(test,
+ drm_mode_parse_command_line_for_connector(cmdline,
+ connector,
+ cmdline_mode));
+
+ mutex_lock(&drm->mode_config.mutex);
+ ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+ mutex_unlock(&drm->mode_config.mutex);
+ KUNIT_ASSERT_GT(test, ret, 0);
+
+ mode = drm_connector_pick_cmdline_mode(connector);
+ KUNIT_ASSERT_PTR_NE(test, mode, NULL);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
+}
+
+static struct kunit_case drm_pick_cmdline_tests[] = {
+ KUNIT_CASE(drm_pick_cmdline_res_1920_1080_60),
+ {}
+};
+
+static struct kunit_suite drm_pick_cmdline_test_suite = {
+ .name = "drm_pick_cmdline",
+ .init = drm_client_modeset_test_init,
+ .exit = drm_client_modeset_test_exit,
+ .test_cases = drm_pick_cmdline_tests
+};
+
+kunit_test_suite(drm_pick_cmdline_test_suite);
+MODULE_AUTHOR("Maxime Ripard <mripard at kernel.org>");
+MODULE_LICENSE("GPL");
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 14/33] drm/modes: Move named modes parsing to a separate function
The current construction of the named mode parsing doesn't allow to extend
it easily. Let's move it to a separate function so we can add more
parameters and modes.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index a1964e08c38f..b1e800e4ed60 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2229,6 +2229,32 @@ static const char * const drm_named_modes_whitelist[] = {
"PAL",
};
+static int drm_mode_parse_cmdline_named_mode(const char *name,
+ unsigned int name_end,
+ struct drm_cmdline_mode *cmdline_mode)
+{
+ unsigned int i;
+
+ /*
+ * We're sure we're a named mode at that point, iterate over the
+ * list of modes we're aware of.
+ */
+ for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+ int ret;
+
+ ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+ if (ret != name_end)
+ continue;
+
+ strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+ cmdline_mode->specified = true;
+
+ return 1;
+ }
+
+ return -EINVAL;
+}
+
/**
* drm_mode_parse_command_line_for_connector - parse command line modeline for
connector
* @mode_option: optional per connector mode option
@@ -2265,7 +2291,7 @@ bool drm_mode_parse_command_line_for_connector(const char
*mode_option,
const char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
const char *options_ptr = NULL;
char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
- int i, len, ret;
+ int len, ret;
memset(mode, 0, sizeof(*mode));
mode->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
@@ -2306,17 +2332,19 @@ bool drm_mode_parse_command_line_for_connector(const
char *mode_option,
parse_extras = true;
}
- /* First check for a named mode */
- for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
- ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
- if (ret == mode_end) {
- if (refresh_ptr)
- return false; /* named + refresh is invalid */
- strcpy(mode->name, drm_named_modes_whitelist[i]);
- mode->specified = true;
- break;
- }
+ if (mode_end) {
+ ret = drm_mode_parse_cmdline_named_mode(name, mode_end, mode);
+ if (ret < 0)
+ return false;
+
+ /*
+ * Having a mode that starts by a letter (and thus is named)
+ * and an at-sign (used to specify a refresh rate) is
+ * disallowed.
+ */
+ if (ret && refresh_ptr)
+ return false;
}
/* No named mode? Check for a normal mode argument, e.g. 1024x768 */
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 15/33] drm/modes: Bail out of named mode parsing if empty
If the name we want to parse has a length of zero, there's no need to
compare it to the list of all the named modes we support, we can return
straight away.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index b1e800e4ed60..8d629fbb1047 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2235,6 +2235,9 @@ static int drm_mode_parse_cmdline_named_mode(const char
*name,
{
unsigned int i;
+ if (!name_end)
+ return 0;
+
/*
* We're sure we're a named mode at that point, iterate over the
* list of modes we're aware of.
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 16/33] drm/modes: Bail out of named mode parsing early if it's a number
If the name we want to parse starts with a digit, it's not a named mode. Thus, there's no need to compare it to the list of all the named modes we support, we can return straight away. Signed-off-by: Maxime Ripard <maxime at cerno.tech> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 8d629fbb1047..ede5b094da4c 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -2238,6 +2238,10 @@ static int drm_mode_parse_cmdline_named_mode(const char *name, if (!name_end) return 0; + /* If the name starts with a digit, it's not a named mode */ + if (isdigit(name[0])) + return 0; + /* * We're sure we're a named mode at that point, iterate over the * list of modes we're aware of. -- b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 17/33] drm/modes: Bail out of named mode parsing early if it's an option
The name we are given is the first part of the command line split at a comma. We can thus be called in two cases, either we are parsing a (named?) mode, before the optional part separated by a comma, or we never had a mode specified but only options. Options use the equal sign as separator between the name and its value, so if we ever find an equal sign in our string, we can bail early since we never had a mode to parse. Signed-off-by: Maxime Ripard <maxime at cerno.tech> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index ede5b094da4c..dc5d5bdbea7a 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -2242,6 +2242,13 @@ static int drm_mode_parse_cmdline_named_mode(const char *name, if (isdigit(name[0])) return 0; + /* + * If there's an equal sign in the name, the command-line + * contains only an option and no mode. + */ + if (strnchr(name, name_end, '=')) + return 0; + /* * We're sure we're a named mode at that point, iterate over the * list of modes we're aware of. -- b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 18/33] drm/modes: Bail out of named mode parsing early if it's a status
The name we are given is the first part of the command line, the part before any option. The most trivial case is thus that we're parsing a mode. However, the connection status uses a single character to encode what status we want to force on a connector. It's thus fairly easy to confuse that character with a named mode, and our current code works because the list of the named modes we consider doesn't start with any of those characters. However, it's not very obvious and quite fragile, so let's add an explicit test for this, with some comment to explain what's going on. Signed-off-by: Maxime Ripard <maxime at cerno.tech> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index dc5d5bdbea7a..9cee0ad806b8 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -2249,6 +2249,15 @@ static int drm_mode_parse_cmdline_named_mode(const char *name, if (strnchr(name, name_end, '=')) return 0; +#define STR_STRICT_EQ(str, len, cmp) \ + (str_has_prefix(str, cmp) == len) + + /* The connection status extras can be set without a mode. */ + if (STR_STRICT_EQ(name, name_end, "d") || + STR_STRICT_EQ(name, name_end, "D") || + STR_STRICT_EQ(name, name_end, "e")) + return 0; + /* * We're sure we're a named mode at that point, iterate over the * list of modes we're aware of. -- b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 19/33] drm/modes: Switch to named mode descriptors
The current named mode parsing relies only the mode name, and doesn't allow
to specify any other parameter.
Let's convert that string list to an array of a custom structure that will
hold the name and some additional parameters in the future.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 9cee0ad806b8..8c8b37ba37dc 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2224,9 +2224,13 @@ static int drm_mode_parse_cmdline_options(const char
*str,
return 0;
}
-static const char * const drm_named_modes_whitelist[] = {
- "NTSC",
- "PAL",
+struct drm_named_mode {
+ const char *name;
+};
+
+static const struct drm_named_mode drm_named_modes[] = {
+ { "NTSC", },
+ { "PAL", },
};
static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2262,14 +2266,15 @@ static int drm_mode_parse_cmdline_named_mode(const char
*name,
* We're sure we're a named mode at that point, iterate over the
* list of modes we're aware of.
*/
- for (i = 0; i < ARRAY_SIZE(drm_named_modes_whitelist); i++) {
+ for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+ const struct drm_named_mode *mode = &drm_named_modes[i];
int ret;
- ret = str_has_prefix(name, drm_named_modes_whitelist[i]);
+ ret = str_has_prefix(name, mode->name);
if (ret != name_end)
continue;
- strcpy(cmdline_mode->name, drm_named_modes_whitelist[i]);
+ strcpy(cmdline_mode->name, mode->name);
cmdline_mode->specified = true;
return 1;
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 20/33] drm/modes: Fill drm_cmdline mode from named modes
The current code to deal with named modes will only set the mode name, and
then it's up to drivers to try to match that name to whatever mode or
configuration they see fit.
The plan is to remove that need and move the named mode handling out of
drivers and into the core, and only rely on modes and properties. Let's
start by properly filling drm_cmdline_mode from a named mode.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 8c8b37ba37dc..5d8b6a0d96f3 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,11 +2226,22 @@ static int drm_mode_parse_cmdline_options(const char
*str,
struct drm_named_mode {
const char *name;
+ unsigned int xres;
+ unsigned int yres;
+ unsigned int flags;
};
+#define NAMED_MODE(_name, _x, _y, _flags) \
+ { \
+ .name = _name, \
+ .xres = _x, \
+ .yres = _y, \
+ .flags = _flags, \
+ }
+
static const struct drm_named_mode drm_named_modes[] = {
- { "NTSC", },
- { "PAL", },
+ NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
+ NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
};
static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2275,6 +2286,9 @@ static int drm_mode_parse_cmdline_named_mode(const char
*name,
continue;
strcpy(cmdline_mode->name, mode->name);
+ cmdline_mode->xres = mode->xres;
+ cmdline_mode->yres = mode->yres;
+ cmdline_mode->interlace = !!(mode->flags &
DRM_MODE_FLAG_INTERLACE);
cmdline_mode->specified = true;
return 1;
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 21/33] drm/connector: Add pixel clock to cmdline mode
We'll need to get the pixel clock to generate proper display modes for
all the current named modes. Let's add it to struct drm_cmdline_mode and
fill it when parsing the named mode.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 5d8b6a0d96f3..eb3c4e596c67 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2226,22 +2226,24 @@ static int drm_mode_parse_cmdline_options(const char
*str,
struct drm_named_mode {
const char *name;
+ unsigned int pixel_clock_khz;
unsigned int xres;
unsigned int yres;
unsigned int flags;
};
-#define NAMED_MODE(_name, _x, _y, _flags) \
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags) \
{ \
.name = _name, \
+ .pixel_clock_khz = _pclk, \
.xres = _x, \
.yres = _y, \
.flags = _flags, \
}
static const struct drm_named_mode drm_named_modes[] = {
- NAMED_MODE("NTSC", 720, 480, DRM_MODE_FLAG_INTERLACE),
- NAMED_MODE("PAL", 720, 576, DRM_MODE_FLAG_INTERLACE),
+ NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
+ NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
};
static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2286,6 +2288,7 @@ static int drm_mode_parse_cmdline_named_mode(const char
*name,
continue;
strcpy(cmdline_mode->name, mode->name);
+ cmdline_mode->pixel_clock = mode->pixel_clock_khz;
cmdline_mode->xres = mode->xres;
cmdline_mode->yres = mode->yres;
cmdline_mode->interlace = !!(mode->flags &
DRM_MODE_FLAG_INTERLACE);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index fffacbfd0a45..80e19efb3f42 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1279,6 +1279,13 @@ struct drm_cmdline_mode {
*/
bool bpp_specified;
+ /**
+ * @pixel_clock:
+ *
+ * Pixel Clock in kHz. Optional.
+ */
+ unsigned int pixel_clock;
+
/**
* @xres:
*
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 22/33] drm/connector: Add a function to lookup a TV mode by its name
As part of the command line parsing rework coming in the next patches,
we'll need to lookup drm_connector_tv_mode values by their name, already
defined in drm_tv_mode_enum_list.
In order to avoid any code duplication, let's do a function that will
perform a lookup of a TV mode name and return its value.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index e7aa8de08f5b..7acf294aba5f 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -992,6 +992,30 @@ static const struct drm_prop_enum_list
drm_tv_mode_enum_list[] = {
};
DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
+/**
+ * drm_get_tv_mode_from_name - Translates a TV mode name into its enum value
+ * @name: TV Mode name we want to convert
+ * @len: Length of @name
+ *
+ * Translates @name into an enum drm_connector_tv_mode.
+ *
+ * Returns: the enum value on success, a negative errno otherwise.
+ */
+int drm_get_tv_mode_from_name(const char *name, size_t len)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(drm_tv_mode_enum_list); i++) {
+ const struct drm_prop_enum_list *item = &drm_tv_mode_enum_list[i];
+
+ if (strlen(item->name) == len && !strncmp(item->name, name,
len))
+ return item->type;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(drm_get_tv_mode_from_name);
+
static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and
TV-out */
{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 80e19efb3f42..0dcd08e036b6 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1870,6 +1870,8 @@ const char *drm_get_dp_subconnector_name(int val);
const char *drm_get_content_protection_name(int val);
const char *drm_get_hdcp_content_type_name(int val);
+int drm_get_tv_mode_from_name(const char *name, size_t len);
+
int drm_mode_create_dvi_i_properties(struct drm_device *dev);
void drm_connector_attach_dp_subconnector_property(struct drm_connector
*connector);
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 23/33] drm/modes: Introduce the tv_mode property as a command-line option
Our new tv mode option allows to specify the TV mode from a property.
However, it can still be useful, for example to avoid any boot time
artifact, to set that property directly from the kernel command line.
Let's add some code to allow it, and some unit tests to exercise that code.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index eb3c4e596c67..23e665fd808e 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2133,6 +2133,29 @@ static int drm_mode_parse_panel_orientation(const char
*delim,
return 0;
}
+static int drm_mode_parse_tv_mode(const char *delim,
+ struct drm_cmdline_mode *mode)
+{
+ const char *value;
+ int ret;
+
+ if (*delim != '=')
+ return -EINVAL;
+
+ value = delim + 1;
+ delim = strchr(value, ',');
+ if (!delim)
+ delim = value + strlen(value);
+
+ ret = drm_get_tv_mode_from_name(value, delim - value);
+ if (ret < 0)
+ return ret;
+
+ mode->tv_mode = ret;
+
+ return 0;
+}
+
static int drm_mode_parse_cmdline_options(const char *str,
bool freestanding,
const struct drm_connector *connector,
@@ -2202,6 +2225,9 @@ static int drm_mode_parse_cmdline_options(const char *str,
} else if (!strncmp(option, "panel_orientation", delim - option)) {
if (drm_mode_parse_panel_orientation(delim, mode))
return -EINVAL;
+ } else if (!strncmp(option, "tv_mode", delim - option)) {
+ if (drm_mode_parse_tv_mode(delim, mode))
+ return -EINVAL;
} else {
return -EINVAL;
}
@@ -2230,20 +2256,22 @@ struct drm_named_mode {
unsigned int xres;
unsigned int yres;
unsigned int flags;
+ unsigned int tv_mode;
};
-#define NAMED_MODE(_name, _pclk, _x, _y, _flags) \
+#define NAMED_MODE(_name, _pclk, _x, _y, _flags, _mode) \
{ \
.name = _name, \
.pixel_clock_khz = _pclk, \
.xres = _x, \
.yres = _y, \
.flags = _flags, \
+ .tv_mode = _mode, \
}
static const struct drm_named_mode drm_named_modes[] = {
- NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE),
- NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE),
+ NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_NTSC),
+ NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_PAL),
};
static int drm_mode_parse_cmdline_named_mode(const char *name,
@@ -2292,6 +2320,7 @@ static int drm_mode_parse_cmdline_named_mode(const char
*name,
cmdline_mode->xres = mode->xres;
cmdline_mode->yres = mode->yres;
cmdline_mode->interlace = !!(mode->flags &
DRM_MODE_FLAG_INTERLACE);
+ cmdline_mode->tv_mode = mode->tv_mode;
cmdline_mode->specified = true;
return 1;
diff --git a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
index 09b806e27506..019ff5aa4f8d 100644
--- a/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
+++ b/drivers/gpu/drm/tests/drm_cmdline_parser_test.c
@@ -927,6 +927,14 @@ static const struct drm_cmdline_invalid_test
drm_cmdline_invalid_tests[] = {
.name = "invalid_option",
.cmdline = "720x480,test=42",
},
+ {
+ .name = "invalid_tv_option",
+ .cmdline = "720x480i,tv_mode=invalid",
+ },
+ {
+ .name = "truncated_tv_option",
+ .cmdline = "720x480i,tv_mode=NTS",
+ },
};
static void drm_cmdline_invalid_desc(const struct drm_cmdline_invalid_test *t,
@@ -937,6 +945,64 @@ static void drm_cmdline_invalid_desc(const struct
drm_cmdline_invalid_test *t,
KUNIT_ARRAY_PARAM(drm_cmdline_invalid, drm_cmdline_invalid_tests,
drm_cmdline_invalid_desc);
+struct drm_cmdline_tv_option_test {
+ const char *name;
+ const char *cmdline;
+ struct drm_display_mode *(*mode_fn)(struct drm_device *dev);
+ enum drm_connector_tv_mode tv_mode;
+};
+
+static void drm_cmdline_test_tv_options(struct kunit *test)
+{
+ const struct drm_cmdline_tv_option_test *params = test->param_value;
+ const struct drm_display_mode *expected_mode = params->mode_fn(NULL);
+ struct drm_cmdline_mode mode = { };
+
+ KUNIT_EXPECT_TRUE(test,
drm_mode_parse_command_line_for_connector(params->cmdline,
+ &no_connector, &mode));
+ KUNIT_EXPECT_TRUE(test, mode.specified);
+ KUNIT_EXPECT_EQ(test, mode.xres, expected_mode->hdisplay);
+ KUNIT_EXPECT_EQ(test, mode.yres, expected_mode->vdisplay);
+ KUNIT_EXPECT_EQ(test, mode.tv_mode, params->tv_mode);
+
+ KUNIT_EXPECT_FALSE(test, mode.refresh_specified);
+
+ KUNIT_EXPECT_FALSE(test, mode.bpp_specified);
+
+ KUNIT_EXPECT_FALSE(test, mode.rb);
+ KUNIT_EXPECT_FALSE(test, mode.cvt);
+ KUNIT_EXPECT_EQ(test, mode.interlace, !!(expected_mode->flags &
DRM_MODE_FLAG_INTERLACE));
+ KUNIT_EXPECT_FALSE(test, mode.margins);
+ KUNIT_EXPECT_EQ(test, mode.force, DRM_FORCE_UNSPECIFIED);
+}
+
+#define TV_OPT_TEST(_opt, _cmdline, _mode_fn) \
+ { \
+ .name = #_opt, \
+ .cmdline = _cmdline, \
+ .mode_fn = _mode_fn, \
+ .tv_mode = DRM_MODE_TV_MODE_ ## _opt, \
+ }
+
+static const struct drm_cmdline_tv_option_test drm_cmdline_tv_option_tests[] =
{
+ TV_OPT_TEST(NTSC, "720x480i,tv_mode=NTSC",
drm_mode_analog_ntsc_480i),
+ TV_OPT_TEST(NTSC_443, "720x480i,tv_mode=NTSC-443",
drm_mode_analog_ntsc_480i),
+ TV_OPT_TEST(NTSC_J, "720x480i,tv_mode=NTSC-J",
drm_mode_analog_ntsc_480i),
+ TV_OPT_TEST(PAL, "720x576i,tv_mode=PAL", drm_mode_analog_pal_576i),
+ TV_OPT_TEST(PAL_M, "720x480i,tv_mode=PAL-M",
drm_mode_analog_ntsc_480i),
+ TV_OPT_TEST(PAL_N, "720x576i,tv_mode=PAL-N",
drm_mode_analog_pal_576i),
+ TV_OPT_TEST(SECAM, "720x576i,tv_mode=SECAM",
drm_mode_analog_pal_576i),
+};
+
+static void drm_cmdline_tv_option_desc(const struct drm_cmdline_tv_option_test
*t,
+ char *desc)
+{
+ sprintf(desc, "%s", t->name);
+}
+KUNIT_ARRAY_PARAM(drm_cmdline_tv_option,
+ drm_cmdline_tv_option_tests,
+ drm_cmdline_tv_option_desc);
+
static struct kunit_case drm_cmdline_parser_tests[] = {
KUNIT_CASE(drm_cmdline_test_force_d_only),
KUNIT_CASE(drm_cmdline_test_force_D_only_dvi),
@@ -977,6 +1043,7 @@ static struct kunit_case drm_cmdline_parser_tests[] = {
KUNIT_CASE(drm_cmdline_test_freestanding_force_e_and_options),
KUNIT_CASE(drm_cmdline_test_panel_orientation),
KUNIT_CASE_PARAM(drm_cmdline_test_invalid, drm_cmdline_invalid_gen_params),
+ KUNIT_CASE_PARAM(drm_cmdline_test_tv_options,
drm_cmdline_tv_option_gen_params),
{}
};
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 0dcd08e036b6..a8f7b2fdde87 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1374,6 +1374,11 @@ struct drm_cmdline_mode {
* @tv_margins: TV margins to apply to the mode.
*/
struct drm_connector_tv_margins tv_margins;
+
+ /**
+ * @tv_mode: TV mode standard. See DRM_MODE_TV_MODE_*.
+ */
+ enum drm_connector_tv_mode tv_mode;
};
/**
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 24/33] drm/modes: Properly generate a drm_display_mode from a named mode
The framework will get the drm_display_mode from the drm_cmdline_mode it
got by parsing the video command line argument by calling
drm_connector_pick_cmdline_mode().
The heavy lifting will then be done by the drm_mode_create_from_cmdline_mode()
function.
In the case of the named modes though, there's no real code to make that
translation and we rely on the drivers to guess which actual display mode
we meant.
Let's modify drm_mode_create_from_cmdline_mode() to properly generate the
drm_display_mode we mean when passing a named mode.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 23e665fd808e..1ca1f82dfd12 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2500,6 +2500,36 @@ bool drm_mode_parse_command_line_for_connector(const char
*mode_option,
}
EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector);
+static struct drm_display_mode *drm_named_mode(struct drm_device *dev,
+ struct drm_cmdline_mode *cmd)
+{
+ struct drm_display_mode *mode;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(drm_named_modes); i++) {
+ const struct drm_named_mode *named_mode = &drm_named_modes[i];
+
+ if (strcmp(cmd->name, named_mode->name))
+ continue;
+
+ if (!named_mode->tv_mode)
+ continue;
+
+ mode = drm_analog_tv_mode(dev,
+ named_mode->tv_mode,
+ named_mode->pixel_clock_khz * 1000,
+ named_mode->xres,
+ named_mode->yres,
+ named_mode->flags & DRM_MODE_FLAG_INTERLACE);
+ if (!mode)
+ return NULL;
+
+ return mode;
+ }
+
+ return NULL;
+}
+
/**
* drm_mode_create_from_cmdline_mode - convert a command line modeline into a
DRM display mode
* @dev: DRM device to create the new mode for
@@ -2517,7 +2547,9 @@ drm_mode_create_from_cmdline_mode(struct drm_device *dev,
if (cmd->xres == 0 || cmd->yres == 0)
return NULL;
- if (cmd->cvt)
+ if (strlen(cmd->name))
+ mode = drm_named_mode(dev, cmd);
+ else if (cmd->cvt)
mode = drm_cvt_mode(dev,
cmd->xres, cmd->yres,
cmd->refresh_specified ? cmd->refresh : 60,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c
b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 46335de7bc6b..4380cf670fb4 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -26,6 +26,20 @@ static int drm_client_modeset_connector_get_modes(struct
drm_connector *connecto
count = drm_add_modes_noedid(connector, 1920, 1200);
+ mode = drm_mode_analog_ntsc_480i(connector->dev);
+ if (!mode)
+ return -ENOMEM;
+
+ drm_mode_probed_add(connector, mode);
+ count += 1;
+
+ mode = drm_mode_analog_pal_576i(connector->dev);
+ if (!mode)
+ return -ENOMEM;
+
+ drm_mode_probed_add(connector, mode);
+ count += 1;
+
return count;
}
@@ -58,6 +72,9 @@ static int drm_client_modeset_test_init(struct kunit *test)
return ret;
drm_connector_helper_add(&priv->connector,
&drm_client_modeset_connector_helper_funcs);
+ priv->connector.interlace_allowed = true;
+ priv->connector.doublescan_allowed = true;
+
return 0;
}
@@ -97,8 +114,62 @@ static void drm_pick_cmdline_res_1920_1080_60(struct kunit
*test)
KUNIT_EXPECT_TRUE(test, drm_mode_equal(expected_mode, mode));
}
+static void drm_pick_cmdline_named_ntsc(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv = test->priv;
+ struct drm_device *drm = priv->drm;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+ struct drm_display_mode *mode;
+ const char *cmdline = "NTSC";
+ int ret;
+
+ KUNIT_ASSERT_TRUE(test,
+ drm_mode_parse_command_line_for_connector(cmdline,
+ connector,
+ cmdline_mode));
+
+ mutex_lock(&drm->mode_config.mutex);
+ ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+ mutex_unlock(&drm->mode_config.mutex);
+ KUNIT_ASSERT_GT(test, ret, 0);
+
+ mode = drm_connector_pick_cmdline_mode(connector);
+ KUNIT_ASSERT_PTR_NE(test, mode, NULL);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_ntsc_480i(drm), mode));
+}
+
+static void drm_pick_cmdline_named_pal(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv = test->priv;
+ struct drm_device *drm = priv->drm;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+ struct drm_display_mode *mode;
+ const char *cmdline = "PAL";
+ int ret;
+
+ KUNIT_ASSERT_TRUE(test,
+ drm_mode_parse_command_line_for_connector(cmdline,
+ connector,
+ cmdline_mode));
+
+ mutex_lock(&drm->mode_config.mutex);
+ ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+ mutex_unlock(&drm->mode_config.mutex);
+ KUNIT_ASSERT_GT(test, ret, 0);
+
+ mode = drm_connector_pick_cmdline_mode(connector);
+ KUNIT_ASSERT_PTR_NE(test, mode, NULL);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_pal_576i(drm), mode));
+}
+
static struct kunit_case drm_pick_cmdline_tests[] = {
KUNIT_CASE(drm_pick_cmdline_res_1920_1080_60),
+ KUNIT_CASE(drm_pick_cmdline_named_ntsc),
+ KUNIT_CASE(drm_pick_cmdline_named_pal),
{}
};
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 25/33] drm/modes: Introduce more named modes
Now that we can easily extend the named modes list, let's add a few more
analog TV modes that were used in the wild, and some unit tests to make
sure it works as intended.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 1ca1f82dfd12..6f315385bd02 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -2271,7 +2271,9 @@ struct drm_named_mode {
static const struct drm_named_mode drm_named_modes[] = {
NAMED_MODE("NTSC", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_NTSC),
+ NAMED_MODE("NTSC-J", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_NTSC_J),
NAMED_MODE("PAL", 13500, 720, 576, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_PAL),
+ NAMED_MODE("PAL-M", 13500, 720, 480, DRM_MODE_FLAG_INTERLACE,
DRM_MODE_TV_MODE_PAL_M),
};
static int drm_mode_parse_cmdline_named_mode(const char *name,
diff --git a/drivers/gpu/drm/tests/drm_client_modeset_test.c
b/drivers/gpu/drm/tests/drm_client_modeset_test.c
index 4380cf670fb4..521505753af9 100644
--- a/drivers/gpu/drm/tests/drm_client_modeset_test.c
+++ b/drivers/gpu/drm/tests/drm_client_modeset_test.c
@@ -140,6 +140,32 @@ static void drm_pick_cmdline_named_ntsc(struct kunit *test)
KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_ntsc_480i(drm), mode));
}
+static void drm_pick_cmdline_named_ntsc_j(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv = test->priv;
+ struct drm_device *drm = priv->drm;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+ struct drm_display_mode *mode;
+ const char *cmdline = "NTSC-J";
+ int ret;
+
+ KUNIT_ASSERT_TRUE(test,
+ drm_mode_parse_command_line_for_connector(cmdline,
+ connector,
+ cmdline_mode));
+
+ mutex_lock(&drm->mode_config.mutex);
+ ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+ mutex_unlock(&drm->mode_config.mutex);
+ KUNIT_ASSERT_GT(test, ret, 0);
+
+ mode = drm_connector_pick_cmdline_mode(connector);
+ KUNIT_ASSERT_PTR_NE(test, mode, NULL);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_ntsc_480i(drm), mode));
+}
+
static void drm_pick_cmdline_named_pal(struct kunit *test)
{
struct drm_client_modeset_test_priv *priv = test->priv;
@@ -166,10 +192,38 @@ static void drm_pick_cmdline_named_pal(struct kunit *test)
KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_pal_576i(drm), mode));
}
+static void drm_pick_cmdline_named_pal_m(struct kunit *test)
+{
+ struct drm_client_modeset_test_priv *priv = test->priv;
+ struct drm_device *drm = priv->drm;
+ struct drm_connector *connector = &priv->connector;
+ struct drm_cmdline_mode *cmdline_mode = &connector->cmdline_mode;
+ struct drm_display_mode *mode;
+ const char *cmdline = "PAL-M";
+ int ret;
+
+ KUNIT_ASSERT_TRUE(test,
+ drm_mode_parse_command_line_for_connector(cmdline,
+ connector,
+ cmdline_mode));
+
+ mutex_lock(&drm->mode_config.mutex);
+ ret = drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+ mutex_unlock(&drm->mode_config.mutex);
+ KUNIT_ASSERT_GT(test, ret, 0);
+
+ mode = drm_connector_pick_cmdline_mode(connector);
+ KUNIT_ASSERT_PTR_NE(test, mode, NULL);
+
+ KUNIT_EXPECT_TRUE(test, drm_mode_equal(drm_mode_analog_ntsc_480i(drm), mode));
+}
+
static struct kunit_case drm_pick_cmdline_tests[] = {
KUNIT_CASE(drm_pick_cmdline_res_1920_1080_60),
KUNIT_CASE(drm_pick_cmdline_named_ntsc),
+ KUNIT_CASE(drm_pick_cmdline_named_ntsc_j),
KUNIT_CASE(drm_pick_cmdline_named_pal),
+ KUNIT_CASE(drm_pick_cmdline_named_pal_m),
{}
};
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 26/33] drm/atomic-helper: Add a TV properties reset helper
The drm_tv_create_properties() function will create a bunch of properties,
but it's up to each and every driver using that function to properly reset
the state of these properties leading to inconsistent behaviours.
Let's create a helper that will take care of it.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c
b/drivers/gpu/drm/drm_atomic_state_helper.c
index dfb57217253b..0373c3dc824b 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -481,6 +481,81 @@ void drm_atomic_helper_connector_tv_margins_reset(struct
drm_connector *connecto
}
EXPORT_SYMBOL(drm_atomic_helper_connector_tv_margins_reset);
+/**
+ * drm_atomic_helper_connector_tv_reset - Resets Analog TV connector properties
+ * @connector: DRM connector
+ *
+ * Resets the analog TV properties attached to a connector
+ */
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_cmdline_mode *cmdline = &connector->cmdline_mode;
+ struct drm_connector_state *state = connector->state;
+ struct drm_property *prop;
+ uint64_t val;
+
+ prop = dev->mode_config.tv_mode_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.mode = val;
+
+ if (cmdline->tv_mode)
+ state->tv.mode = cmdline->tv_mode;
+
+ prop = dev->mode_config.tv_select_subconnector_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.select_subconnector = val;
+
+ prop = dev->mode_config.tv_subconnector_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.subconnector = val;
+
+ prop = dev->mode_config.tv_brightness_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.brightness = val;
+
+ prop = dev->mode_config.tv_contrast_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.contrast = val;
+
+ prop = dev->mode_config.tv_flicker_reduction_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.flicker_reduction = val;
+
+ prop = dev->mode_config.tv_overscan_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.overscan = val;
+
+ prop = dev->mode_config.tv_saturation_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.saturation = val;
+
+ prop = dev->mode_config.tv_hue_property;
+ if (prop)
+ if (!drm_object_property_get_default_value(&connector->base,
+ prop, &val))
+ state->tv.hue = val;
+
+ drm_atomic_helper_connector_tv_margins_reset(connector);
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
+
/**
* __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
* @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h
b/include/drm/drm_atomic_state_helper.h
index 192766656b88..c8fbce795ee7 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -70,6 +70,7 @@ void __drm_atomic_helper_connector_state_reset(struct
drm_connector_state *conn_
void __drm_atomic_helper_connector_reset(struct drm_connector *connector,
struct drm_connector_state *conn_state);
void drm_atomic_helper_connector_reset(struct drm_connector *connector);
+void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector
*connector);
void
__drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 27/33] drm/atomic-helper: Add an analog TV atomic_check implementation
The analog TV connector drivers share some atomic_check logic, and the new
TV standard property have created a bunch of new constraints that needs to
be shared across drivers too.
Let's create an atomic_check helper for those use cases.
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c
b/drivers/gpu/drm/drm_atomic_state_helper.c
index 0373c3dc824b..e88c57a4f7be 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -556,6 +556,55 @@ void drm_atomic_helper_connector_tv_reset(struct
drm_connector *connector)
}
EXPORT_SYMBOL(drm_atomic_helper_connector_tv_reset);
+/**
+ * @drm_atomic_helper_connector_tv_check: Validate an analog TV connector state
+ * @connector: DRM Connector
+ * @state: the DRM State object
+ *
+ * Checks the state object to see if the requested state is valid for an
+ * analog TV connector.
+ *
+ * Returns:
+ * Zero for success, a negative error code on error.
+ */
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+ struct drm_atomic_state *state)
+{
+ struct drm_connector_state *old_conn_state +
drm_atomic_get_old_connector_state(state, connector);
+ struct drm_connector_state *new_conn_state +
drm_atomic_get_new_connector_state(state, connector);
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
+
+ crtc = new_conn_state->crtc;
+ if (!crtc)
+ return 0;
+
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+ if (!crtc_state)
+ return -EINVAL;
+
+ if (old_conn_state->tv.mode != new_conn_state->tv.mode)
+ crtc_state->mode_changed = true;
+
+ if ((old_conn_state->tv.margins.left != new_conn_state->tv.margins.left)
||
+ (old_conn_state->tv.margins.right !=
new_conn_state->tv.margins.right) ||
+ (old_conn_state->tv.margins.top != new_conn_state->tv.margins.top)
||
+ (old_conn_state->tv.margins.bottom !=
new_conn_state->tv.margins.bottom) ||
+ (old_conn_state->tv.mode != new_conn_state->tv.mode) ||
+ (old_conn_state->tv.brightness != new_conn_state->tv.brightness) ||
+ (old_conn_state->tv.contrast != new_conn_state->tv.contrast) ||
+ (old_conn_state->tv.flicker_reduction !=
new_conn_state->tv.flicker_reduction) ||
+ (old_conn_state->tv.overscan != new_conn_state->tv.overscan) ||
+ (old_conn_state->tv.saturation != new_conn_state->tv.saturation) ||
+ (old_conn_state->tv.hue != new_conn_state->tv.hue))
+ crtc_state->connectors_changed = true;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_atomic_helper_connector_tv_check);
+
/**
* __drm_atomic_helper_connector_duplicate_state - copy atomic connector state
* @connector: connector object
diff --git a/include/drm/drm_atomic_state_helper.h
b/include/drm/drm_atomic_state_helper.h
index c8fbce795ee7..b9740edb2658 100644
--- a/include/drm/drm_atomic_state_helper.h
+++ b/include/drm/drm_atomic_state_helper.h
@@ -26,6 +26,7 @@
#include <linux/types.h>
+struct drm_atomic_state;
struct drm_bridge;
struct drm_bridge_state;
struct drm_crtc;
@@ -71,6 +72,8 @@ void __drm_atomic_helper_connector_reset(struct drm_connector
*connector,
struct drm_connector_state *conn_state);
void drm_atomic_helper_connector_reset(struct drm_connector *connector);
void drm_atomic_helper_connector_tv_reset(struct drm_connector *connector);
+int drm_atomic_helper_connector_tv_check(struct drm_connector *connector,
+ struct drm_atomic_state *state);
void drm_atomic_helper_connector_tv_margins_reset(struct drm_connector
*connector);
void
__drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 28/33] drm/vc4: vec: Fix definition of PAL-M mode
From: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
PAL-M is a Brazilian analog TV standard that uses a PAL-style chroma
subcarrier at 3.575611[888111] MHz on top of 525-line (480i60) timings.
This commit makes the driver actually use the proper VEC preset for this
mode instead of just changing PAL subcarrier frequency.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index f31fef938f11..5ec3a12359b1 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -69,6 +69,7 @@
#define VEC_CONFIG0_STD_MASK GENMASK(1, 0)
#define VEC_CONFIG0_NTSC_STD 0
#define VEC_CONFIG0_PAL_BDGHI_STD 1
+#define VEC_CONFIG0_PAL_M_STD 2
#define VEC_CONFIG0_PAL_N_STD 3
#define VEC_SCHPH 0x108
@@ -255,10 +256,9 @@ static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
[VC4_VEC_TV_MODE_PAL_M] = {
- .mode = &pal_mode,
- .config0 = VEC_CONFIG0_PAL_BDGHI_STD,
- .config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
- .custom_freq = 0x223b61d1,
+ .mode = &ntsc_mode,
+ .config0 = VEC_CONFIG0_PAL_M_STD,
+ .config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
};
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 29/33] drm/vc4: vec: Use TV Reset implementation
The analog TV properties created by the drm_mode_create_tv_properties() are
not properly initialised at reset. Let's switch our implementation to call
drm_atomic_helper_connector_tv_reset().
Reviewed-by: Noralf Tr?nnes <noralf at tronnes.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 5ec3a12359b1..baa29067a1ff 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -268,6 +268,12 @@ vc4_vec_connector_detect(struct drm_connector *connector,
bool force)
return connector_status_unknown;
}
+static void vc4_vec_connector_reset(struct drm_connector *connector)
+{
+ drm_atomic_helper_connector_reset(connector);
+ drm_atomic_helper_connector_tv_reset(connector);
+}
+
static int vc4_vec_connector_get_modes(struct drm_connector *connector)
{
struct drm_connector_state *state = connector->state;
@@ -288,7 +294,7 @@ static int vc4_vec_connector_get_modes(struct drm_connector
*connector)
static const struct drm_connector_funcs vc4_vec_connector_funcs = {
.detect = vc4_vec_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
- .reset = drm_atomic_helper_connector_reset,
+ .reset = vc4_vec_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 30/33] drm/vc4: vec: Check for VEC output constraints
From: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
The VEC can accept pretty much any relatively reasonable mode, but still
has a bunch of constraints to meet.
Let's create an atomic_check() implementation that will make sure we
don't end up accepting a non-functional mode.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index baa29067a1ff..6828b79a1001 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -453,6 +453,7 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder
*encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
+ const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
const struct vc4_vec_tv_mode *vec_mode;
vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
@@ -461,6 +462,53 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder
*encoder,
!drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
return -EINVAL;
+ if (mode->crtc_hdisplay % 4)
+ return -EINVAL;
+
+ if (!(mode->crtc_hsync_end - mode->crtc_hsync_start))
+ return -EINVAL;
+
+ switch (mode->vtotal) {
+ case 525:
+ if (mode->crtc_vtotal > 262)
+ return -EINVAL;
+
+ if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 253)
+ return -EINVAL;
+
+ if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+ return -EINVAL;
+
+ if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+ return -EINVAL;
+
+ if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 4)
+ return -EINVAL;
+
+ break;
+
+ case 625:
+ if (mode->crtc_vtotal > 312)
+ return -EINVAL;
+
+ if (mode->crtc_vdisplay < 1 || mode->crtc_vdisplay > 305)
+ return -EINVAL;
+
+ if (!(mode->crtc_vsync_start - mode->crtc_vdisplay))
+ return -EINVAL;
+
+ if ((mode->crtc_vsync_end - mode->crtc_vsync_start) != 3)
+ return -EINVAL;
+
+ if ((mode->crtc_vtotal - mode->crtc_vsync_end) < 2)
+ return -EINVAL;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
return 0;
}
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 31/33] drm/vc4: vec: Convert to the new TV mode property
Now that the core can deal fine with analog TV modes, let's convert the vc4
VEC driver to leverage those new features.
We've added some backward compatibility to support the old TV mode property
and translate it into the new TV norm property.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 6828b79a1001..a9463364015b 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -172,6 +172,8 @@ struct vc4_vec {
struct clk *clock;
+ struct drm_property *legacy_tv_mode_property;
+
struct debugfs_regset32 regset;
};
@@ -184,6 +186,12 @@ encoder_to_vc4_vec(struct drm_encoder *encoder)
return container_of(encoder, struct vc4_vec, encoder.base);
}
+static inline struct vc4_vec *
+connector_to_vc4_vec(struct drm_connector *connector)
+{
+ return container_of(connector, struct vc4_vec, connector);
+}
+
enum vc4_vec_tv_mode_id {
VC4_VEC_TV_MODE_NTSC,
VC4_VEC_TV_MODE_NTSC_J,
@@ -192,7 +200,7 @@ enum vc4_vec_tv_mode_id {
};
struct vc4_vec_tv_mode {
- const struct drm_display_mode *mode;
+ unsigned int mode;
u32 config0;
u32 config1;
u32 custom_freq;
@@ -225,43 +233,51 @@ static const struct debugfs_reg32 vec_regs[] = {
VC4_REG32(VEC_DAC_MISC),
};
-static const struct drm_display_mode ntsc_mode = {
- DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500,
- 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0,
- 480, 480 + 7, 480 + 7 + 6, 525, 0,
- DRM_MODE_FLAG_INTERLACE)
-};
-
-static const struct drm_display_mode pal_mode = {
- DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500,
- 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0,
- 576, 576 + 4, 576 + 4 + 6, 625, 0,
- DRM_MODE_FLAG_INTERLACE)
-};
-
static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
- [VC4_VEC_TV_MODE_NTSC] = {
- .mode = &ntsc_mode,
+ {
+ .mode = DRM_MODE_TV_MODE_NTSC,
.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
- [VC4_VEC_TV_MODE_NTSC_J] = {
- .mode = &ntsc_mode,
+ {
+ .mode = DRM_MODE_TV_MODE_NTSC_J,
.config0 = VEC_CONFIG0_NTSC_STD,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
- [VC4_VEC_TV_MODE_PAL] = {
- .mode = &pal_mode,
+ {
+ .mode = DRM_MODE_TV_MODE_PAL,
.config0 = VEC_CONFIG0_PAL_BDGHI_STD,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
- [VC4_VEC_TV_MODE_PAL_M] = {
- .mode = &ntsc_mode,
+ {
+ .mode = DRM_MODE_TV_MODE_PAL_M,
.config0 = VEC_CONFIG0_PAL_M_STD,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
};
+static inline const struct vc4_vec_tv_mode *
+vc4_vec_tv_mode_lookup(unsigned int mode)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(vc4_vec_tv_modes); i++) {
+ const struct vc4_vec_tv_mode *tv_mode = &vc4_vec_tv_modes[i];
+
+ if (tv_mode->mode == mode)
+ return tv_mode;
+ }
+
+ return NULL;
+}
+
+static const struct drm_prop_enum_list tv_mode_names[] = {
+ { VC4_VEC_TV_MODE_NTSC, "NTSC", },
+ { VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
+ { VC4_VEC_TV_MODE_PAL, "PAL", },
+ { VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+};
+
static enum drm_connector_status
vc4_vec_connector_detect(struct drm_connector *connector, bool force)
{
@@ -276,19 +292,99 @@ static void vc4_vec_connector_reset(struct drm_connector
*connector)
static int vc4_vec_connector_get_modes(struct drm_connector *connector)
{
- struct drm_connector_state *state = connector->state;
struct drm_display_mode *mode;
+ int count = 0;
- mode = drm_mode_duplicate(connector->dev,
- vc4_vec_tv_modes[state->tv.legacy_mode].mode);
+ mode = drm_mode_analog_ntsc_480i(connector->dev);
if (!mode) {
DRM_ERROR("Failed to create a new display mode\n");
return -ENOMEM;
}
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
drm_mode_probed_add(connector, mode);
+ count += 1;
- return 1;
+ mode = drm_mode_analog_pal_576i(connector->dev);
+ if (!mode) {
+ DRM_ERROR("Failed to create a new display mode\n");
+ return -ENOMEM;
+ }
+
+ drm_mode_probed_add(connector, mode);
+ count += 1;
+
+ return count;
+}
+
+static int
+vc4_vec_connector_set_property(struct drm_connector *connector,
+ struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t val)
+{
+ struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+ if (property != vec->legacy_tv_mode_property)
+ return -EINVAL;
+
+ switch (val) {
+ case VC4_VEC_TV_MODE_NTSC:
+ state->tv.mode = DRM_MODE_TV_MODE_NTSC;
+ break;
+
+ case VC4_VEC_TV_MODE_NTSC_J:
+ state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
+ break;
+
+ case VC4_VEC_TV_MODE_PAL:
+ state->tv.mode = DRM_MODE_TV_MODE_PAL;
+ break;
+
+ case VC4_VEC_TV_MODE_PAL_M:
+ state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+vc4_vec_connector_get_property(struct drm_connector *connector,
+ const struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t *val)
+{
+ struct vc4_vec *vec = connector_to_vc4_vec(connector);
+
+ if (property != vec->legacy_tv_mode_property)
+ return -EINVAL;
+
+ switch (state->tv.mode) {
+ case DRM_MODE_TV_MODE_NTSC:
+ *val = VC4_VEC_TV_MODE_NTSC;
+ break;
+
+ case DRM_MODE_TV_MODE_NTSC_J:
+ *val = VC4_VEC_TV_MODE_NTSC_J;
+ break;
+
+ case DRM_MODE_TV_MODE_PAL:
+ *val = VC4_VEC_TV_MODE_PAL;
+ break;
+
+ case DRM_MODE_TV_MODE_PAL_M:
+ *val = VC4_VEC_TV_MODE_PAL_M;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
}
static const struct drm_connector_funcs vc4_vec_connector_funcs = {
@@ -297,15 +393,19 @@ static const struct drm_connector_funcs
vc4_vec_connector_funcs = {
.reset = vc4_vec_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+ .atomic_get_property = vc4_vec_connector_get_property,
+ .atomic_set_property = vc4_vec_connector_set_property,
};
static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs =
{
+ .atomic_check = drm_atomic_helper_connector_tv_check,
.get_modes = vc4_vec_connector_get_modes,
};
static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec)
{
struct drm_connector *connector = &vec->connector;
+ struct drm_property *prop;
int ret;
connector->interlace_allowed = true;
@@ -318,8 +418,16 @@ static int vc4_vec_connector_init(struct drm_device *dev,
struct vc4_vec *vec)
drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs);
drm_object_attach_property(&connector->base,
- dev->mode_config.legacy_tv_mode_property,
- VC4_VEC_TV_MODE_NTSC);
+ dev->mode_config.tv_mode_property,
+ DRM_MODE_TV_MODE_NTSC);
+
+ prop = drm_property_create_enum(dev, 0, "mode",
+ tv_mode_names, ARRAY_SIZE(tv_mode_names));
+ if (!prop)
+ return -ENOMEM;
+ vec->legacy_tv_mode_property = prop;
+
+ drm_object_attach_property(&connector->base, prop,
VC4_VEC_TV_MODE_NTSC);
drm_connector_attach_encoder(connector, &vec->encoder.base);
@@ -366,13 +474,16 @@ static void vc4_vec_encoder_enable(struct drm_encoder
*encoder,
struct drm_connector *connector = &vec->connector;
struct drm_connector_state *conn_state
drm_atomic_get_new_connector_state(state, connector);
- const struct vc4_vec_tv_mode *tv_mode -
&vc4_vec_tv_modes[conn_state->tv.mode];
+ const struct vc4_vec_tv_mode *tv_mode;
int idx, ret;
if (!drm_dev_enter(drm, &idx))
return;
+ tv_mode = vc4_vec_tv_mode_lookup(conn_state->tv.mode);
+ if (!tv_mode)
+ goto err_dev_exit;
+
ret = pm_runtime_get_sync(&vec->pdev->dev);
if (ret < 0) {
DRM_ERROR("Failed to retain power domain: %d\n", ret);
@@ -454,13 +565,6 @@ static int vc4_vec_encoder_atomic_check(struct drm_encoder
*encoder,
struct drm_connector_state *conn_state)
{
const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
- const struct vc4_vec_tv_mode *vec_mode;
-
- vec_mode = &vc4_vec_tv_modes[conn_state->tv.legacy_mode];
-
- if (conn_state->crtc &&
- !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode))
- return -EINVAL;
if (mode->crtc_hdisplay % 4)
return -EINVAL;
@@ -554,13 +658,6 @@ static const struct of_device_id vc4_vec_dt_match[] = {
{ /* sentinel */ },
};
-static const char * const tv_mode_names[] = {
- [VC4_VEC_TV_MODE_NTSC] = "NTSC",
- [VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J",
- [VC4_VEC_TV_MODE_PAL] = "PAL",
- [VC4_VEC_TV_MODE_PAL_M] = "PAL-M",
-};
-
static int vc4_vec_bind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -568,9 +665,11 @@ static int vc4_vec_bind(struct device *dev, struct device
*master, void *data)
struct vc4_vec *vec;
int ret;
- ret = drm_mode_create_tv_properties_legacy(drm,
- ARRAY_SIZE(tv_mode_names),
- tv_mode_names);
+ ret = drm_mode_create_tv_properties(drm,
+ BIT(DRM_MODE_TV_MODE_NTSC) |
+ BIT(DRM_MODE_TV_MODE_NTSC_J) |
+ BIT(DRM_MODE_TV_MODE_PAL) |
+ BIT(DRM_MODE_TV_MODE_PAL_M));
if (ret)
return ret;
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 32/33] drm/vc4: vec: Add support for more analog TV standards
From: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
Add support for the following composite output modes (all of them are
somewhat more obscure than the previously defined ones):
- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to
4.43361875 MHz (the PAL subcarrier frequency). Never used for
broadcasting, but sometimes used as a hack to play NTSC content in PAL
regions (e.g. on VCRs).
- PAL_N - PAL with alternative chroma subcarrier frequency,
3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay
and Uruguay to fit 576i50 with colour in 6 MHz channel raster.
- PAL60 - 480i60 signal with PAL-style color at normal European PAL
frequency. Another non-standard, non-broadcast mode, used in similar
contexts as NTSC_443. Some displays support one but not the other.
- SECAM - French frequency-modulated analog color standard; also have
been broadcast in Eastern Europe and various parts of Africa and Asia.
Uses the same 576i50 timings as PAL.
Also added some comments explaining color subcarrier frequency
registers.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index a9463364015b..0862462aa9e3 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -46,6 +46,7 @@
#define VEC_CONFIG0_YDEL(x) ((x) << 26)
#define VEC_CONFIG0_CDEL_MASK GENMASK(25, 24)
#define VEC_CONFIG0_CDEL(x) ((x) << 24)
+#define VEC_CONFIG0_SECAM_STD BIT(21)
#define VEC_CONFIG0_PBPR_FIL BIT(18)
#define VEC_CONFIG0_CHROMA_GAIN_MASK GENMASK(17, 16)
#define VEC_CONFIG0_CHROMA_GAIN_UNITY (0 << 16)
@@ -76,6 +77,27 @@
#define VEC_SOFT_RESET 0x10c
#define VEC_CLMP0_START 0x144
#define VEC_CLMP0_END 0x148
+
+/*
+ * These set the color subcarrier frequency
+ * if VEC_CONFIG1_CUSTOM_FREQ is enabled.
+ *
+ * VEC_FREQ1_0 contains the most significant 16-bit half-word,
+ * VEC_FREQ3_2 contains the least significant 16-bit half-word.
+ * 0x80000000 seems to be equivalent to the pixel clock
+ * (which itself is the VEC clock divided by 8).
+ *
+ * Reference values (with the default pixel clock of 13.5 MHz):
+ *
+ * NTSC (3579545.[45] Hz) - 0x21F07C1F
+ * PAL (4433618.75 Hz) - 0x2A098ACB
+ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3
+ * PAL-N (3582056.25 Hz) - 0x21F69446
+ *
+ * NOTE: For SECAM, it is used as the Dr center frequency,
+ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not;
+ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72.
+ */
#define VEC_FREQ3_2 0x180
#define VEC_FREQ1_0 0x184
@@ -118,6 +140,14 @@
#define VEC_INTERRUPT_CONTROL 0x190
#define VEC_INTERRUPT_STATUS 0x194
+
+/*
+ * Db center frequency for SECAM; the clock for this is the same as for
+ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency.
+ *
+ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13.
+ * That is also the default value, so no need to set it explicitly.
+ */
#define VEC_FCW_SECAM_B 0x198
#define VEC_SECAM_GAIN_VAL 0x19c
@@ -197,6 +227,10 @@ enum vc4_vec_tv_mode_id {
VC4_VEC_TV_MODE_NTSC_J,
VC4_VEC_TV_MODE_PAL,
VC4_VEC_TV_MODE_PAL_M,
+ VC4_VEC_TV_MODE_NTSC_443,
+ VC4_VEC_TV_MODE_PAL_60,
+ VC4_VEC_TV_MODE_PAL_N,
+ VC4_VEC_TV_MODE_SECAM,
};
struct vc4_vec_tv_mode {
@@ -239,6 +273,12 @@ static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
.config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
+ {
+ .mode = DRM_MODE_TV_MODE_NTSC_443,
+ .config0 = VEC_CONFIG0_NTSC_STD,
+ .config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ,
+ .custom_freq = 0x2a098acb,
+ },
{
.mode = DRM_MODE_TV_MODE_NTSC_J,
.config0 = VEC_CONFIG0_NTSC_STD,
@@ -254,6 +294,17 @@ static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = {
.config0 = VEC_CONFIG0_PAL_M_STD,
.config1 = VEC_CONFIG1_C_CVBS_CVBS,
},
+ {
+ .mode = DRM_MODE_TV_MODE_PAL_N,
+ .config0 = VEC_CONFIG0_PAL_N_STD,
+ .config1 = VEC_CONFIG1_C_CVBS_CVBS,
+ },
+ {
+ .mode = DRM_MODE_TV_MODE_SECAM,
+ .config0 = VEC_CONFIG0_SECAM_STD,
+ .config1 = VEC_CONFIG1_C_CVBS_CVBS,
+ .custom_freq = 0x29c71c72,
+ },
};
static inline const struct vc4_vec_tv_mode *
@@ -273,9 +324,13 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
static const struct drm_prop_enum_list tv_mode_names[] = {
{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
+ { VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
{ VC4_VEC_TV_MODE_PAL, "PAL", },
+ { VC4_VEC_TV_MODE_PAL_60, "PAL-60", },
{ VC4_VEC_TV_MODE_PAL_M, "PAL-M", },
+ { VC4_VEC_TV_MODE_PAL_N, "PAL-N", },
+ { VC4_VEC_TV_MODE_SECAM, "SECAM", },
};
static enum drm_connector_status
@@ -333,6 +388,10 @@ vc4_vec_connector_set_property(struct drm_connector
*connector,
state->tv.mode = DRM_MODE_TV_MODE_NTSC;
break;
+ case VC4_VEC_TV_MODE_NTSC_443:
+ state->tv.mode = DRM_MODE_TV_MODE_NTSC_443;
+ break;
+
case VC4_VEC_TV_MODE_NTSC_J:
state->tv.mode = DRM_MODE_TV_MODE_NTSC_J;
break;
@@ -345,6 +404,14 @@ vc4_vec_connector_set_property(struct drm_connector
*connector,
state->tv.mode = DRM_MODE_TV_MODE_PAL_M;
break;
+ case VC4_VEC_TV_MODE_PAL_N:
+ state->tv.mode = DRM_MODE_TV_MODE_PAL_N;
+ break;
+
+ case VC4_VEC_TV_MODE_SECAM:
+ state->tv.mode = DRM_MODE_TV_MODE_SECAM;
+ break;
+
default:
return -EINVAL;
}
@@ -368,6 +435,10 @@ vc4_vec_connector_get_property(struct drm_connector
*connector,
*val = VC4_VEC_TV_MODE_NTSC;
break;
+ case DRM_MODE_TV_MODE_NTSC_443:
+ *val = VC4_VEC_TV_MODE_NTSC_443;
+ break;
+
case DRM_MODE_TV_MODE_NTSC_J:
*val = VC4_VEC_TV_MODE_NTSC_J;
break;
@@ -380,6 +451,14 @@ vc4_vec_connector_get_property(struct drm_connector
*connector,
*val = VC4_VEC_TV_MODE_PAL_M;
break;
+ case DRM_MODE_TV_MODE_PAL_N:
+ *val = VC4_VEC_TV_MODE_PAL_N;
+ break;
+
+ case DRM_MODE_TV_MODE_SECAM:
+ *val = VC4_VEC_TV_MODE_SECAM;
+ break;
+
default:
return -EINVAL;
}
@@ -667,9 +746,12 @@ static int vc4_vec_bind(struct device *dev, struct device
*master, void *data)
ret = drm_mode_create_tv_properties(drm,
BIT(DRM_MODE_TV_MODE_NTSC) |
+ BIT(DRM_MODE_TV_MODE_NTSC_443) |
BIT(DRM_MODE_TV_MODE_NTSC_J) |
BIT(DRM_MODE_TV_MODE_PAL) |
- BIT(DRM_MODE_TV_MODE_PAL_M));
+ BIT(DRM_MODE_TV_MODE_PAL_M) |
+ BIT(DRM_MODE_TV_MODE_PAL_N) |
+ BIT(DRM_MODE_TV_MODE_SECAM));
if (ret)
return ret;
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:25 UTC
[Nouveau] [PATCH v2 33/33] drm/sun4i: tv: Convert to the new TV mode property
Now that the core can deal fine with analog TV modes, let's convert the
sun4i TV driver to leverage those new features.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/sun4i/sun4i_tv.c b/drivers/gpu/drm/sun4i/sun4i_tv.c
index 74ff5ad6a8b9..833742cee745 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tv.c
@@ -140,23 +140,14 @@ struct resync_parameters {
struct tv_mode {
char *name;
+ unsigned int tv_mode;
+
u32 mode;
u32 chroma_freq;
u16 back_porch;
u16 front_porch;
- u16 line_number;
u16 vblank_level;
- u32 hdisplay;
- u16 hfront_porch;
- u16 hsync_len;
- u16 hback_porch;
-
- u32 vdisplay;
- u16 vfront_porch;
- u16 vsync_len;
- u16 vback_porch;
-
bool yc_en;
bool dac3_en;
bool dac_bit25_en;
@@ -212,7 +203,7 @@ static const struct resync_parameters pal_resync_parameters
= {
static const struct tv_mode tv_modes[] = {
{
- .name = "NTSC",
+ .tv_mode = DRM_MODE_TV_MODE_NTSC,
.mode = SUN4I_TVE_CFG0_RES_480i,
.chroma_freq = 0x21f07c1f,
.yc_en = true,
@@ -221,17 +212,6 @@ static const struct tv_mode tv_modes[] = {
.back_porch = 118,
.front_porch = 32,
- .line_number = 525,
-
- .hdisplay = 720,
- .hfront_porch = 18,
- .hsync_len = 2,
- .hback_porch = 118,
-
- .vdisplay = 480,
- .vfront_porch = 26,
- .vsync_len = 2,
- .vback_porch = 17,
.vblank_level = 240,
@@ -241,23 +221,12 @@ static const struct tv_mode tv_modes[] = {
.resync_params = &ntsc_resync_parameters,
},
{
- .name = "PAL",
+ .tv_mode = DRM_MODE_TV_MODE_PAL,
.mode = SUN4I_TVE_CFG0_RES_576i,
.chroma_freq = 0x2a098acb,
.back_porch = 138,
.front_porch = 24,
- .line_number = 625,
-
- .hdisplay = 720,
- .hfront_porch = 3,
- .hsync_len = 2,
- .hback_porch = 139,
-
- .vdisplay = 576,
- .vfront_porch = 28,
- .vsync_len = 2,
- .vback_porch = 19,
.vblank_level = 252,
@@ -275,63 +244,21 @@ drm_encoder_to_sun4i_tv(struct drm_encoder *encoder)
encoder);
}
-/*
- * FIXME: If only the drm_display_mode private field was usable, this
- * could go away...
- *
- * So far, it doesn't seem to be preserved when the mode is passed by
- * to mode_set for some reason.
- */
-static const struct tv_mode *sun4i_tv_find_tv_by_mode(const struct
drm_display_mode *mode)
+static const struct tv_mode *
+sun4i_tv_find_tv_by_mode(unsigned int mode)
{
int i;
- /* First try to identify the mode by name */
for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
const struct tv_mode *tv_mode = &tv_modes[i];
- DRM_DEBUG_DRIVER("Comparing mode %s vs %s",
- mode->name, tv_mode->name);
-
- if (!strcmp(mode->name, tv_mode->name))
- return tv_mode;
- }
-
- /* Then by number of lines */
- for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
- const struct tv_mode *tv_mode = &tv_modes[i];
-
- DRM_DEBUG_DRIVER("Comparing mode %s vs %s (X: %d vs %d)",
- mode->name, tv_mode->name,
- mode->vdisplay, tv_mode->vdisplay);
-
- if (mode->vdisplay == tv_mode->vdisplay)
+ if (tv_mode->tv_mode == mode)
return tv_mode;
}
return NULL;
}
-static void sun4i_tv_mode_to_drm_mode(const struct tv_mode *tv_mode,
- struct drm_display_mode *mode)
-{
- DRM_DEBUG_DRIVER("Creating mode %s\n", mode->name);
-
- mode->type = DRM_MODE_TYPE_DRIVER;
- mode->clock = 13500;
- mode->flags = DRM_MODE_FLAG_INTERLACE;
-
- mode->hdisplay = tv_mode->hdisplay;
- mode->hsync_start = mode->hdisplay + tv_mode->hfront_porch;
- mode->hsync_end = mode->hsync_start + tv_mode->hsync_len;
- mode->htotal = mode->hsync_end + tv_mode->hback_porch;
-
- mode->vdisplay = tv_mode->vdisplay;
- mode->vsync_start = mode->vdisplay + tv_mode->vfront_porch;
- mode->vsync_end = mode->vsync_start + tv_mode->vsync_len;
- mode->vtotal = mode->vsync_end + tv_mode->vback_porch;
-}
-
static void sun4i_tv_disable(struct drm_encoder *encoder,
struct drm_atomic_state *state)
{
@@ -355,7 +282,11 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state drm_atomic_get_new_crtc_state(state,
encoder->crtc);
struct drm_display_mode *mode = &crtc_state->mode;
- const struct tv_mode *tv_mode = sun4i_tv_find_tv_by_mode(mode);
+ struct drm_connector *connector = &tv->connector;
+ struct drm_connector_state *conn_state +
drm_atomic_get_new_connector_state(state, connector);
+ const struct tv_mode *tv_mode +
sun4i_tv_find_tv_by_mode(conn_state->tv.mode);
DRM_DEBUG_DRIVER("Enabling the TV Output\n");
@@ -403,7 +334,7 @@ static void sun4i_tv_enable(struct drm_encoder *encoder,
/* Set the lines setup */
regmap_write(tv->regs, SUN4I_TVE_LINE_REG,
SUN4I_TVE_LINE_FIRST(22) |
- SUN4I_TVE_LINE_NUMBER(tv_mode->line_number));
+ SUN4I_TVE_LINE_NUMBER(mode->vtotal));
regmap_write(tv->regs, SUN4I_TVE_LEVEL_REG,
SUN4I_TVE_LEVEL_BLANK(tv_mode->video_levels->blank) |
@@ -466,35 +397,46 @@ static const struct drm_encoder_helper_funcs
sun4i_tv_helper_funcs = {
static int sun4i_tv_comp_get_modes(struct drm_connector *connector)
{
- int i;
+ struct drm_display_mode *mode;
+ int count = 0;
- for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
- struct drm_display_mode *mode;
- const struct tv_mode *tv_mode = &tv_modes[i];
-
- mode = drm_mode_create(connector->dev);
- if (!mode) {
- DRM_ERROR("Failed to create a new display mode\n");
- return 0;
- }
+ mode = drm_mode_analog_ntsc_480i(connector->dev);
+ if (!mode) {
+ DRM_ERROR("Failed to create a new display mode\n");
+ return -ENOMEM;
+ }
- strcpy(mode->name, tv_mode->name);
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+ drm_mode_probed_add(connector, mode);
+ count += 1;
- sun4i_tv_mode_to_drm_mode(tv_mode, mode);
- drm_mode_probed_add(connector, mode);
+ mode = drm_mode_analog_pal_576i(connector->dev);
+ if (!mode) {
+ DRM_ERROR("Failed to create a new display mode\n");
+ return -ENOMEM;
}
- return i;
+ drm_mode_probed_add(connector, mode);
+ count += 1;
+
+ return count;
}
static const struct drm_connector_helper_funcs
sun4i_tv_comp_connector_helper_funcs = {
+ .atomic_check = drm_atomic_helper_connector_tv_check,
.get_modes = sun4i_tv_comp_get_modes,
};
+static void sun4i_tv_connector_reset(struct drm_connector *connector)
+{
+ drm_atomic_helper_connector_reset(connector);
+ drm_atomic_helper_connector_tv_reset(connector);
+}
+
static const struct drm_connector_funcs sun4i_tv_comp_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = drm_connector_cleanup,
- .reset = drm_atomic_helper_connector_reset,
+ .reset = sun4i_tv_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
@@ -586,8 +528,20 @@ static int sun4i_tv_bind(struct device *dev, struct device
*master,
drm_connector_attach_encoder(&tv->connector, &tv->encoder);
+ ret = drm_mode_create_tv_properties(drm,
+ BIT(DRM_MODE_TV_MODE_NTSC) |
+ BIT(DRM_MODE_TV_MODE_PAL));
+ if (ret)
+ goto err_cleanup_connector;
+
+ drm_object_attach_property(&tv->connector.base,
+ drm->mode_config.tv_mode_property,
+ DRM_MODE_TV_MODE_NTSC);
+
return 0;
+err_cleanup_connector:
+ drm_connector_cleanup(&tv->connector);
err_cleanup_encoder:
drm_encoder_cleanup(&tv->encoder);
err_disable_clk:
diff --git a/drivers/gpu/drm/vc4/vc4_vec.c b/drivers/gpu/drm/vc4/vc4_vec.c
index 0862462aa9e3..b9f7bd7b8b7a 100644
--- a/drivers/gpu/drm/vc4/vc4_vec.c
+++ b/drivers/gpu/drm/vc4/vc4_vec.c
@@ -322,7 +322,7 @@ vc4_vec_tv_mode_lookup(unsigned int mode)
return NULL;
}
-static const struct drm_prop_enum_list tv_mode_names[] = {
+static const struct drm_prop_enum_list legacy_tv_mode_names[] = {
{ VC4_VEC_TV_MODE_NTSC, "NTSC", },
{ VC4_VEC_TV_MODE_NTSC_443, "NTSC-443", },
{ VC4_VEC_TV_MODE_NTSC_J, "NTSC-J", },
@@ -501,7 +501,8 @@ static int vc4_vec_connector_init(struct drm_device *dev,
struct vc4_vec *vec)
DRM_MODE_TV_MODE_NTSC);
prop = drm_property_create_enum(dev, 0, "mode",
- tv_mode_names, ARRAY_SIZE(tv_mode_names));
+ legacy_tv_mode_names,
+ ARRAY_SIZE(legacy_tv_mode_names));
if (!prop)
return -ENOMEM;
vec->legacy_tv_mode_property = prop;
--
b4 0.10.0
Maxime Ripard
2022-Sep-22 14:31 UTC
[Nouveau] [PATCH v2 00/33] drm: Analog TV Improvements
Hi, On Thu, Sep 22, 2022 at 04:25:17PM +0200, Maxime Ripard wrote:> Here's a series aiming at improving the command line named modes support, > and more importantly how we deal with all the analog TV variants. > > The named modes support were initially introduced to allow to specify the > analog TV mode to be used. > > However, this was causing multiple issues: > > * The mode name parsed on the command line was passed directly to the > driver, which had to figure out which mode it was suppose to match; > > * Figuring that out wasn't really easy, since the video= argument or what > the userspace might not even have a name in the first place, but > instead could have passed a mode with the same timings; > > * The fallback to matching on the timings was mostly working as long as > we were supporting one 525 lines (most likely NSTC) and one 625 lines > (PAL), but couldn't differentiate between two modes with the same > timings (NTSC vs PAL-M vs NSTC-J for example); > > * There was also some overlap with the tv mode property registered by > drm_mode_create_tv_properties(), but named modes weren't interacting > with that property at all. > > * Even though that property was generic, its possible values were > specific to each drivers, which made some generic support difficult. > > Thus, I chose to tackle in multiple steps: > > * A new TV mode property was introduced, with generic values, each driver > reporting through a bitmask what standard it supports to the userspace; > > * This option was added to the command line parsing code to be able to > specify it on the kernel command line, and new atomic_check and reset > helpers were created to integrate properly into atomic KMS; > > * The named mode parsing code is now creating a proper display mode for > the given named mode, and the TV standard will thus be part of the > connector state; > > * Two drivers were converted and tested for now (vc4 and sun4i), with > some backward compatibility code to translate the old TV mode to the > new TV mode; > > Unit tests were created along the way. > > One can switch from NTSC to PAL now using (on vc4) > > modetest -M vc4 -s 53:720x480i -w 53:'TV mode':1 # NTSC > modetest -M vc4 -s 53:720x576i -w 53:'TV mode':4 # PAL > > Let me know what you think, > Maxime > > To: David Airlie <airlied at linux.ie> > To: Daniel Vetter <daniel at ffwll.ch> > To: Maarten Lankhorst <maarten.lankhorst at linux.intel.com> > To: Maxime Ripard <mripard at kernel.org> > To: Thomas Zimmermann <tzimmermann at suse.de> > To: Emma Anholt <emma at anholt.net> > To: Jani Nikula <jani.nikula at linux.intel.com> > To: Joonas Lahtinen <joonas.lahtinen at linux.intel.com> > To: Rodrigo Vivi <rodrigo.vivi at intel.com> > To: Tvrtko Ursulin <tvrtko.ursulin at linux.intel.com> > To: Ben Skeggs <bskeggs at redhat.com> > To: Karol Herbst <kherbst at redhat.com> > To: Lyude Paul <lyude at redhat.com> > To: Chen-Yu Tsai <wens at csie.org> > To: Jernej Skrabec <jernej.skrabec at gmail.com> > To: Samuel Holland <samuel at sholland.org> > Cc: Geert Uytterhoeven <geert at linux-m68k.org> > Cc: Mateusz Kwiatkowski <kfyatek+publicgit at gmail.com> > Cc: "Noralf Tr?nnes" <noralf at tronnes.org> > Cc: Dave Stevenson <dave.stevenson at raspberrypi.com> > Cc: Dom Cobley <dom at raspberrypi.com> > Cc: Phil Elwell <phil at raspberrypi.com> > Cc: <dri-devel at lists.freedesktop.org> > Cc: linux-kernel at vger.kernel.org > Cc: intel-gfx at lists.freedesktop.org > Cc: nouveau at lists.freedesktop.org > Cc: linux-arm-kernel at lists.infradead.org > Cc: linux-sunxi at lists.linux.dev > Cc: Hans de Goede <hdegoede at redhat.com> > Signed-off-by: Maxime Ripard <maxime at cerno.tech> > > --- > Changes in v3: > - Applied some of the fixes to vc4 and sun4i > - Renamed the old TV mode property to legacy_mode > - Fixed a bunch of bisection errors > - Removed most of the redundant TV modes > - Added a new None TV mode to not fall back on NTSC by mistake > - Fixed the mode generation function to match better what is expected > - Added some logging to the mode generation function > - Split the improvements to the named mode parsing logic into separate patches > - Added more checks to the TV atomic_check helper > - Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7 at cerno.tech/Sorry, this is obviously the v3... Maxime -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 228 bytes Desc: not available URL: <https://lists.freedesktop.org/archives/nouveau/attachments/20220922/4b3c42ab/attachment-0001.sig>
Noralf Trønnes
2022-Sep-25 15:58 UTC
[Nouveau] [PATCH v2 00/33] drm: Analog TV Improvements
Den 22.09.2022 16.25, skrev Maxime Ripard:> Hi, > > Here's a series aiming at improving the command line named modes support, > and more importantly how we deal with all the analog TV variants. > > The named modes support were initially introduced to allow to specify the > analog TV mode to be used. > > However, this was causing multiple issues: > > * The mode name parsed on the command line was passed directly to the > driver, which had to figure out which mode it was suppose to match; > > * Figuring that out wasn't really easy, since the video= argument or what > the userspace might not even have a name in the first place, but > instead could have passed a mode with the same timings; > > * The fallback to matching on the timings was mostly working as long as > we were supporting one 525 lines (most likely NSTC) and one 625 lines > (PAL), but couldn't differentiate between two modes with the same > timings (NTSC vs PAL-M vs NSTC-J for example); > > * There was also some overlap with the tv mode property registered by > drm_mode_create_tv_properties(), but named modes weren't interacting > with that property at all. > > * Even though that property was generic, its possible values were > specific to each drivers, which made some generic support difficult. > > Thus, I chose to tackle in multiple steps: > > * A new TV mode property was introduced, with generic values, each driver > reporting through a bitmask what standard it supports to the userspace; > > * This option was added to the command line parsing code to be able to > specify it on the kernel command line, and new atomic_check and reset > helpers were created to integrate properly into atomic KMS; > > * The named mode parsing code is now creating a proper display mode for > the given named mode, and the TV standard will thus be part of the > connector state; > > * Two drivers were converted and tested for now (vc4 and sun4i), with > some backward compatibility code to translate the old TV mode to the > new TV mode; > > Unit tests were created along the way. > > One can switch from NTSC to PAL now using (on vc4) > > modetest -M vc4 -s 53:720x480i -w 53:'TV mode':1 # NTSC > modetest -M vc4 -s 53:720x576i -w 53:'TV mode':4 # PAL > > Let me know what you think, > Maxime<snip>> drivers/gpu/drm/drm_atomic_state_helper.c | 128 ++++- > drivers/gpu/drm/drm_atomic_uapi.c | 8 + > drivers/gpu/drm/drm_client_modeset.c | 4 + > drivers/gpu/drm/drm_connector.c | 111 +++- > drivers/gpu/drm/drm_modes.c | 658 +++++++++++++++++++++++- > drivers/gpu/drm/gud/gud_connector.c | 12 +- > drivers/gpu/drm/i2c/ch7006_drv.c | 6 +- > drivers/gpu/drm/i915/display/intel_tv.c | 5 +- > drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 6 +- > drivers/gpu/drm/sun4i/sun4i_tv.c | 148 ++---- > drivers/gpu/drm/tests/Makefile | 16 +- > drivers/gpu/drm/tests/drm_client_modeset_test.c | 239 +++++++++ > drivers/gpu/drm/tests/drm_cmdline_parser_test.c | 67 +++ > drivers/gpu/drm/tests/drm_kunit_helpers.c | 54 ++ > drivers/gpu/drm/tests/drm_kunit_helpers.h | 9 + > drivers/gpu/drm/tests/drm_modes_test.c | 136 +++++ > drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +- > drivers/gpu/drm/vc4/vc4_vec.c | 339 ++++++++++-- > include/drm/drm_atomic_state_helper.h | 4 + > include/drm/drm_connector.h | 92 +++- > include/drm/drm_mode_config.h | 12 +- > include/drm/drm_modes.h | 17 +These also needs updating: Documentation/gpu/kms-properties.csv Documentation/fb/modedb.rst Noralf.